C/CA transmission swap

andyin ct · May 11, 2014

Before I jump into this project - I have a transmission from a CA - any issues/surprises swapping it into a C ? Just unbolt axles and transmission and put new transmission in and re-bolt the axles? Thanks

Lonnie Smith · May 11, 2014

Do they interchange that easy? Are all the shafts the same size and spline?

andyin ct · May 12, 2014

I don't know - that is what I am trying to find out.

Dick L · May 12, 2014

All holes and shafts are interchangeable. The only differences were stated below which has nothing to do with the drive parts. I thought it was already clear. (four bolts at the torque tube and four bolts each side for the final drives, cotter key at the drive shaft) the rest unbolts and bolts back up as you took it apart. You can still use the C drawbar as the transmission width at the final drives are the same. No changes to the brake system for the same reason.

steve(ill) · May 15, 2014

you better get the CA rear PTO box and hydraulic pump also.

C/CA transmission swap

andyin ct

Member

Lonnie Smith

Member

andyin ct

Member

Dick L

Well-known Member

steve(ill)

Well-known Member

Similar threads