A-C 190XT

Wayne E.J. · Mar 21, 2014

I would like to know if it is possible to remove the engine oil pan on an Allis-Chalmers 190 without removing the front axle.

AMB(WcIL) · Mar 22, 2014

No, The best way to get apart would be unbolt the front weight/pivot from the frame rails and roll forward. I have never had very good luck trying to pull the front axel pivot pin.

Wayne E.J. · Mar 22, 2014

Thanks so much for answering me about the oil pan removal and about avoiding trying to get the pivot pin out. I didn't want to drop the axle if It was not necessary. Now I know I must do it and you gave me a better way of doing it.

steve alderman · Mar 23, 2014

you can do it I did mine last year had to pin out and jack the front end up did all the rod bearings and mains with motor still on tractor

A-C 190XT

Wayne E.J.

New User

AMB(WcIL)

Member

Wayne E.J.

New User

steve alderman

Member

Similar threads