B112 snow blower fittment to 716H

Anonymous-0 · Feb 6, 2014

I found an old post from 2005 asking the same question with no response. Does anyone know if a B series snow blower would work on a 716H? I have a 74 716H and have found an ad listing several B112s with attachments for sale. The price is worth the blower almost so I would like to know if it would work. Do the B112 attachments mount in the same fashion and pickup points (same measurements on the frame)? Do they both use a front clutch system that runs off the front of the crankshaft?

Also, what are current users opinion of this blower? Does it work if functioning properly? Is seems to only be a single stage blower (from what I can see in the pics), does it do a good job throwing dry and wet snow?

Any thoughts would be very appreciated

Bob Bancroft · Feb 6, 2014

They were a good snow blower. As good as any I think. But does any snow blower move wet snow well?
I also think the attach points were the same on the front axle.
However, the snow blower on the B10,110,210, etc. was clutched with an over center belt tightener. The pulley was in front of the grill, mounted directly on the protruding crankshaft. I suppose it might be possible to reconfigure the idlers to work with the later engine/pulley/clutch arrangement.

IA Roy · Feb 7, 2014

I have a sears single stage that I converted to fit my 716. I think it is also the "H" version. I haven't used it in about 3 years as the engine threw a rod. I am in Central to Northeast Iowa if you might be interested. It isn't the greatest, but it took care of my driveway.

B112 snow blower fittment to 716H

Anonymous-0

Well-known Member

Bob Bancroft

Well-known Member

IA Roy

Well-known Member

Similar threads