Allis G brake drums

Chuck H in Wi · Jan 27, 2014

I have soaked with PB Blaster, used heat around hub of brake drum and a big puller. It been on there since 1948 and does not want to move. Some one have a trick that works to get the drums off? Thanks for your help.

JoeM(GA) · Jan 27, 2014

If it's the older sheet metal ones, it's easier to just bite the bullet and blow them off with a torch, the newer cast ones are threaded to make it easier to pull off. I have had to blow the cast ones off too, but usually they'll come off with work.

Allis G brake drums

Chuck H in Wi

Member

JoeM(GA)

Well-known Member

Similar threads