Ok, so I got my loader frame on this weekend and I'm trying to get my parts list together for hooking up the trip bucket loader. First question, what size are the ports on the hydraulic control valve. I've been reading 1/4 NPT, but my dad swears it's 3/8. Second, my plan is to follow the example of others on the forum and install a 3 way valve to isolate the loader and rear lift arms. Which port do I use going from the hydraulic control to the 3 way valve? Right, or left rear? I've been reading that only one side of the pump actually holds position. I currently have the pump correctly set up for hold position and have no problems, but after reading it sounds like only 1 of the rams actually locks the arms into position. Any help to clear up these questions is greatly appreciated.