A/C 444 baler belt

Dan Nickels · Aug 14, 2013

I am using a 444 baler. Belt that opertates #32 thrower need replacement. Belt is toothed variable speed and 1 inch wide, 1/2 inch deep, 3/4 inch wide at bottom, and 108 inch outside length (belt part# 547293). Belt in no longer available, I cant find one anywhere. Do I now have a 3,000 lb. boat anchor, or can someone offer a suggestion (short of removing thrower and picking up bales)??? Thanks ...Dan

Skyhighballoon(MO) · Aug 14, 2013

Dan - there are several on-line belt suppliers that can cross over that Allis part number to a standard belt. JayDee Enterprises is one I've used to get belts. They cross that part number to HI108.2P. Give them a call. Mike
JayDee Belts

Dan Nickels · Aug 21, 2013

Mike, Thank you very much for your response on the belt for my 444 A/C baler. They did not have one in stock, but were happy to bulid one and have it shipped to me. I was more than delighted, and immediately ordered it. Again, my thanks for the good information...The baler works great and never misses a bale, so I did not want to replace it for want of one belt...Dan

Skyhighballoon(MO) · Aug 22, 2013

Dan - great to hear that. I've had good luck with their belts and they have good prices...esp. compared to AGCO. Mike

A/C 444 baler belt

Dan Nickels

Member

Skyhighballoon(MO)

Member

Dan Nickels

Member

Skyhighballoon(MO)

Member