freeman loader seals

tom grim · Oct 30, 2012

My WD with the freeman loader is leaking way to much.The cylinder shafts are 1.5 " and look great. Does anyone have info on where to get seals or should I just pull apart and take the samples to a cylinder shop? thanks

steve(ill) · Oct 30, 2012

Dont know what kind of seals you have, but for the B and WD 45 cylinders, i buy VEE pakcing from these guys.

http://www.alleghenyyork.com/#
Untitled URL Link

greygoat · Oct 30, 2012

Baum Hydraulics...but first..you're going to
need to know the type of seal, or packing, and
the size's..Inside and outside diameters, and
thickness.

Anonymous-0 · Oct 30, 2012

AGCO has them. Sandy Lake Implement 1-888-252-0656

tom grim · Oct 31, 2012

thanks to all

dakota dave · Nov 1, 2012

You can get them from and AGCO dealer. I"ve rebuilt two sets in the last month. now both may loaders have new seals and don"t leak. it was around $15.00 per set. I don"t know why you wouldn"t just get them from AGCO they come as a set and you need to pull the cylinder apart to install them correctly. The hardest part is getting the snapring off the bottom of the piston. they are v shaped leather seals so soak in oil befor installing. the last pair only took me a hour to do both rams. the ones i took out had been cut to slide over the ram without removing the piston but they have always leaked alittle.

CTucker · Nov 1, 2012

The packing is replaceable but are you out of travel on the packing gland? It can be snugged up for years more service if the nut isn't tight against the gland.

freeman loader seals

tom grim

Member

steve(ill)

Well-known Member

greygoat

Well-known Member

Anonymous-0

Well-known Member

tom grim

Member

dakota dave

Member

CTucker

Member

Similar threads