FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 50 Parts

Category: Steering

[Categories] [All MF50 Parts] [All Massey Ferguson Models]

Axle Pivot Bushing - Rear - For model F40 utility or hi clearance axle, Massey Harris 50, Massey Ferguson 50, 65, 165. Bushing measures 1.913 inches inside diameter, 2.00 inches outside diameter and is .992 inches in width. Replaces OEM number 196050M2, 196050M1. (Item #: 173081, Ref: 196050M1) $13.10

Bearing and Cage, Steering - For MF50, MF65 using a 2 9/16 inch outside diameter bearing. VERIFY MEASUREMENT. Replaces bearing 1024477M91 and cup 1003341M1. 2 used per tractor. (Item #: 151017, Ref: 1850526M91) $26.30

Bushing, Front Axle Pivot - 2 inch inside diameter, 1-7/8 inches long. For tractor models 50, Super 90, 150, 165, 65, 85, 88. (Item #: 128765, Ref: 196049M1) $16.90

Bushing, Steering Arm - Bushing, main steering arm assembly or power steering cylinder support. Tractors: MF50, MF65, MF135, MF150, MF165, MF175, MF255, MF265, MF270, MF275, MF282, MF285, MF290, MF670, MF690. Industrials: 30, 31, 50F, 50H, 302, 304. Measures 3/4 inch inside diameter, 7/8 inch outside diameter, 1-1/4 inch length. Replaces VPJ5244, 190560M1 (Item #: 128534, Ref: 190560M1) $8.40

Differential Ring Gear Case Assembly - For Massey Ferguson tractor models 30, 31, 40, 50, 50A, 65, 135, 150, 175, 180, 205, 220, 235, 240, 245, 250, 255, 261, 265, 270, 275, 282, 283, 285 (s/n 9A349239-later), 290, 298, 360, 375, 390, 390T, 399, 670, 690, 698, 699, 1085, Replaces Massey Ferguson OEM number 882783M92, (Item #: 165984) $175.00

Front Axle Pivot Support - Replaces casting number 186069M1. For tractor models 150, 165, 302, 304, 356, 40, 50, 65. (Item #: 126511, Ref: 506913M91) $114.00

Gasket, Steering Box Mounting - For tractor models F40, FE35, TO35, 1080, 1085, 135, 150, 165, 165 UK, 175, 175 UK, 178, 180, 20, 20C, 2135, 230, 231, 235, 245, 255, 261, 265, 282, 285, 30, 30B, 31, 40B, 50A, 50C, 50D, 35, 35 UK, 40, 50, MH50. Replaces 520307M1, 5230307M1, 180511M1, 180511M2, 180511M92 (Item #: 168134, Ref: 180511M2) $4.30

Jam Nut - For tractor models 1100, 1105, 1130, 1135, 1150, 1155, 150, 165, 168, 175, 185, 188, 245, 255, 265, 275, 285, 290, 30, 31, (50 serial number 533423 and up), (65 serial number 692932 and up). (Item #: 105123, Ref: 192928M1) $8.40

Jam Nut - For Massey Ferguson tractor models 50, 65, 135 (Orchard), 150, 165, 175, 205, Compatible with Massey Ferguson Construction and industrial models 202, 203, 204, Replaces Massey Ferguson OEM number 1960591M1, .812" NF RH Thread, Drag Link Jam Nut, (Item #: 105042) $9.00

Linkage Repair Kit - Kit contains: 1 x 881728M1 Link End LH, 881727M1 Turnbuckle, 881729M1 Link End RH, 183080M1 Clevis Pin, 1 x 1888905M1 Link Control Pin, 3 x 354041x1 Spilt Pins, 1 x 353430x1 Nut, 1 x 375108x1 Nut. Used on 165 UK, 168, 175 UK, 178 UK, 185, 188, 231, 240, 250, 265, 275, 282, 285 (FR), 290, 375E Brazilian, 390E Brazilian, 50, 50B. Verify part numbers before ordering. (Item #: 183824, Ref: S40143) $19.10

No
Picture
Mainshaft Steering Linkage Dust Seal - For Massey Ferguson tractor models 50, 65, 150, 165, 178, 261, 270, 271, 281, 282, 283, 290, 471, 481, 491, 492, 583, 596, 670, 690, Compatible with Massey Ferguson Construction and industrial models 50E, 50F, 50H, Replaces Massey Ferguson OEM number 196079M1, Replaces manufacturer number VPJ2817, Inside Diameter: 1.850", Outside Diameter: 2.441", Width:, 394", (Item #: 185564) $2.80

No
Picture
Pinion Needle Roller - For Massey Ferguson tractor models 50, 65, 85, 88, 135, 150, 165, 175, 180, 235, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 451, 461, 471, 481, 543, 583, 670, 690, Compatible with Massey Ferguson Construction and industrial models 20F, 24, 25, 30, 30B, 30D, 30E, 30H, 31, 40, 40B, 40E, 50A, 50C, 50D, 50E, 50H, 60, 60H, 203, 205, 302, 304, 2200, 2500, 3165, 4500, 6500, 6500H, 6800H, Replaces Massey Ferguson OEM number 831531M1, 184742M1, (Item #: 174488) $0.50

No
Picture
Pinion Thrust Washer - For Massey Ferguson tractor models 50, 65, 85, 88, 135, 150, 165, 175, 180, 235, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 360, 362, 375, 383, 390, 390T, 451, 461, 471, 481, 543, 583, 670, 690, Compatible with Massey Ferguson Construction and industrial models 11, 20F, 24, 25, 30, 30B, 30D, 30E, 30H, 31, 40, 40B, 40E, 50A, 50C, 50D, 50E, 50H, 60, 60H, 203, 205, 302, 304, 2200, 3165, 6500H, 6800H, Replaces Massey Ferguson OEM number 184441M1, (Item #: 173682) $3.30

Planetary Selector, Used - For Massey Ferguson tractor models F40, TO35, 35, 35X, 50, 135, 150, 165, 175, 180, 230, 231, 235, 240, 240P, 241S, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 362, 375, 383, 390, 390T, 393, 398, 431, 451, 471, 481, 491, 492, 543, 583, 596, 1080, 1085, 2625, 2650, 2660, 2670, 2680, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4263, 4265, 4345, 4355, Compatible with Massey Ferguson Construction and industrial models 11, 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50A, 50C, 50D, 50E, 50H, 60, 202, 203, 204, 205, 302, 304, 356, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 180446M1, For a new version of this item use Item #: 173169, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460974) $8.01

Power Steering Cylinder Repair Kit - Power Steering Repair Kit for tractor models MF150, MF160, MF175, MF3165, MF30, MF65 and MF50 repairs 505339M92 and 505525M91 cylinders. Replaces OEM numbers 830860M91, 830860M92. (Item #: 167588, Ref: 830860M91) $52.00

Power Steering Pump - Straight cut gear, 13 teeth, includes drive gear, reservoir and adjustable relief valve preset at 1500 PSI. BARNES style pump, hose fittings on gear side of pump. Does not come with mounting gasket. We do not have a gasket available. For tractors using Perkins 3 Cylinder Gas or Diesel Engines. Models: 35, 50, 135, 150, M230, MF235, MF245, MF250, 135, 230, 231, 240, 245, 250, 2500, 253, 35, 4500, 50; Industrials: 20, 20C, 30B, 30D, 30E, 40, 203, 205, 2135, 2200; Forklifts: 2500, 4500. Replaces Massey Ferguson 193208M91, 518369M92, 527904M91, 773126M92, 527904M93, 527904M92, 773126V92. Replaces J.S. Barnes: 1000013, GC-5060-A-GA-7, GC-5060-A-GA-5, GC-5060-A-GA-2 NOTE: This pump is 4.00 inches deep. If you need a shallower pump order 527904M91 (Item #: 119845, Ref: 773126M92) $160.00

No
Picture
Power Steering Pump - For Massey Ferguson tractor models 35, 50, 135, 230, 231, 235, 240, 250, 253, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 30, 30B, 30D, 30E, 40, 203, 205, 2135, 2200, 2500, 4500, Replaces Massey Ferguson OEM number 1695922M1, 773126M1, 773126UK, Reservoir Diameter: 6", Reservoir Depth: 4", For Smaller Reservoir use # 527904M91, Includes: Internal Filter, (Item #: 174372) $262.08

Power Steering Pump Filter - Measures 1.02 inches inside diameter, 2.99 inches outside diameter, 1.61 inches height. For tractor models 11, Pony, 16, Pacer, 175, 180, 20, 202, 204, 2135, 2155, 2200, 230, 235, 245, 30, 302, 303, 304, 30B, 30D, 3165, 333, 35, 4500, 50, 50D, 555, 555D, 55D, 55G, 55K, 55LP, 65, 85, 88, Colt, FE35, FE35X, 50, Mustang, Pacemaker, TO30. VERIFY MEASUREMENTS of old filter. Replaces 1008553M1, 1052262M91, EP3, P183. (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Filter - This filter measures Overall height 64mm (2.5 inches), Outside Diameter 86mm (3.39 Inches), Inside Diameter 27mm (1.06 inches). It is used on some Massey Ferguson: 1080, 130, 165, 168, 175, 178, 180, 185, 188, 25, 30, 300, 302, 304, 3165, 3303, 50, 50A, 50B, 65. Replaces original part numbers 1883318M91, 1883318M1, 1883318M2, 1019235M91, 169743R91, CR447, 447, P551221, 37H1434 (Item #: 181652, Ref: 1883318M1) $8.10

Power Steering Pump Seal Kit - For tractor models 165, 168, 185, 188, 265, 270, 275, 282, 283, 290, 298, 362, 375, 383, 390, 565, 575, 590, 595, 670, 675, 690, 698, 698T, 30D, 50, 50E. Replaces part number 1635948M1. (Item #: 170118, Ref: 1635948M92) $18.70

Power Steering Pump with Reservoir - For tractor models MH50, TO35, 135, 202, 203, 204, 2135, 35, 40, 50, 65, (150 AG GAS (CONT ENG)GAS/DSL). Replaces part number 182493M92, 191277M91, 191423M92, 191426M91, 191486M91. Pump comes with internal relief valve. (Item #: 112571, Ref: 544443M91) $530.00

Power Steering Seal Kit - For Parker Hannifin Model reference number D17X-01. Without rear plate. Repairs 523089M91, 523090M91, 523091M91, 523092M91 and 523093M91 Power Steering Pumps. Replaces PHPSKIT, PHPS-KIT, 1201-1621 for tractor models MF1080, MF1085, MF165, MF175, MF175, MF255, MF265, MF275, MF285, MF30, MF302, MF304, MF31, MF3165, MF40B, MF50, MF50A, MF50C, MF50D and MF65. (Item #: 113671, Ref: PSP-KIT2) $32.90

Seal, Power Steering Pump Driveshaft - For tractor models 135, 20, 200, 20C, 20D, 20E, 2135, 2200, 230, 235, 240, 245, 250, 2500, 30B, 30D, 30E, 35, 40, 4500, 50, MH50, 65, TO30. Verify measurements of 1.002 inches outside diameter, .437 inches inside diameter and .375 inches in width. (Item #: 173648, Ref: 1751651M1) $6.40

Sliding Rod Assembly - Tie rod end, outer left hand or right hand, slotted. 15.487 inches to center of post, .937 inch outside diameter. For adjustable front axle on tractors: 180, 185, 1080, 1085. For right hand only: 50, 65, 150, 165. (Item #: 102519, Ref: 1028265M92) $33.70

Spindle - Left Hand - For Massey Ferguson tractor model 50, Compatible with Massey Ferguson Construction and industrial model 6500, Replaces Massey Ferguson OEM number 2748637M92, Dimension A: 12.750", Dimension B: 1.762", Dimension C: 1.796", Dimension D: 1.312", When ordering for forklift, order oppsite side as listed, Left Side, Front wheel bearing kit use Item #: 104968, (Item #: 104989) $249.00

Spindle - Left Hand - For Massey Ferguson tractor model 50, Replaces Massey Ferguson OEM number 882257M92, Dimension A: 9.187", Dimension B: 1.762", Dimension C: 2.000", Dimension D: 1.250", Left Side, (Item #: 104991) $164.00

Spindle - Right Hand - For Massey Ferguson tractor model 50, Compatible with Massey Ferguson Construction and industrial model 50C, 50D, 6500, Replaces Massey Ferguson OEM number 674057M93, Dimension A: 12.750", Dimension B: 1.762", Dimension C: 1.796", Dimension D: 1.312", When ordering for forklift, order opposite side as listed, Right Side, Front wheel bearing kit use Item #: 104968, (Item #: 104988) $282.00

Spindle - Right Hand - For Massey Ferguson tractor model 50, Replaces Massey Ferguson OEM number 882256M92, Dimension A: 9.187", Dimension B: 1.762", Dimension C: 2.000", Dimension D: 1.250", Right Side, (Item #: 104990) $203.00

Spindle Bushing - 1.443 inch outside diameter, 1.238 inch inside diameter, 1.5 inches long. For tractor models 130, 150, 165, 40, 50, 65, 765, F40. (Item #: 102477, Ref: 196060M1) $8.60

$Massey Ferguson 50 Spindle Bushing\Bearing\Seal Kit$
Spindle Bushing/Bearing/Seal Kit - Kit includes (4)196060M1 bushings, (2) 18560X thrust bearings, and (2) 180355M1 spindle dust seals. For tractor models 150, 165, 50, 65. (Item #: 104971, Ref: SBBSKIT02) $52.00

$Massey Ferguson 50 Spindle Bushing\Bearing\Seal Kit$
Spindle Bushing/Bearing/Seal Kit - Kit includes (2) 196167M1 thrust bearings, (4) 183086M1 bushings, and (2) seals. For tractor models 135, 165, 168, 178, 185, 188, 20C, 20D, 20F, 202, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 255, 265, 270, 275, 282, 285, 30, 30B, 30D, 30E, 30H, 3165, 356, 392S, 40, 40B, 40E, 4500, 575, 590, 670, 675, 690, 765, 290HD, MH50 (Item #: 104972, Ref: 196165M1) $30.70

Spindle Thrust Bearing - This Spindle Thrust Bearing measures 1.250 inch inside diameter, 2-3/16 inch outside diameter, 5/8 inches deep. Replaces 195175M1. For tractor models 20, 2135, F40, FE35, MF135, MF150, MF165, MF230, MF235, MF245, MF35, MF50, MF65, TE20, TO20, TO30, TO35. (Item #: 102478, Ref: 18560X) $7.10

Spindle, LH - This spindle measures A= 11.625 inch, B= 1.250 inch, C= 1.250 inch, D= .750 inch. For tractor models 40, (MF50 Lo-Clearance), MF65. The wheel bearing kit used for this spindle is part number WBKMF1. (Item #: 102480, Ref: 182560M92) $62.00

Spindle, LH - This spindle measures A= 18.00 inch, B= 1.250 inch, C= 1.250 inch, D= .750 inch. For tractor models 40, 50, (65 Hi-Clearance). The wheel bearing kit used for this spindle is part number WBKMF1. (Item #: 102476, Ref: 182558M92) $80.00

$Massey Ferguson 50 Spindle, LH\RH$
Spindle, LH/RH - A= 12.312 inch, B= 1.762 inch, C=1.796 inch, D= 1.312 inch. For tractor models 50, 50A, (2500 Forklift). (Item #: 104987, Ref: 505644M93) $237.00

Spindle, RH - This spindle measures A= 11.625 inch, B= 1.250 inch, C= 1.250 inch, D= .750 inch. For tractor models 40, (MF50 Lo-Clearance), MF65. The wheel bearing kit used for this spindle is part number WBKMF1. (Item #: 102479, Ref: 182559M92) $68.00

Spindle, RH - This spindle measures A= 18.00 inch, B= 1.250 inch, C= 1.250 inch, D= .750 inch. For tractor models 40, 50, (65 Hi-Clearance). The wheel bearing kit used for this spindle is part number WBKMF1. (Item #: 102475, Ref: 182557M92) $72.01

Steering Arm Seal - For Massey Ferguson tractor models 50, 65, 85, 88, 135, 165, 175, 180, 230, 231, 235, 240, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 360, 362, 670, 690, 1080, 1085, 3050, 3060, 3065, 3070, 3075, 3090, 3095, 3120, 3125, 3630, 3645, 3650, 3655, Replaces Massey Ferguson OEM number 183021M2, VPJ2801, Under Steering Arm, (Item #: 118285) $1.00

Steering Box Assembly - Steering Box Assembly, for manual steering tractors. Length 17 inches. uses 1691798M1 steering wheel. Used on 231, 240, 250, 20D, 30E, 40E (Will also work on; 35, 50, 20, 135, 2135, 235, 202, 203, 204, 205 by ordering two 827690M1 'cup and lock ring sets' and 1691798M1 Steering Wheel.) Replaces 1673663M1, 1673663M91. Does not come with Mounting Gasket or Shifter Cups. (Item #: 161571, Ref: 1673663M1) $533.00

Steering Column Grommet - Verify Measurements: 1 3/8 inch inside diameter, 2 3/8 inch outside diameter. For tractor models TO35 (serial number 154616-204180), 25, F40, 50, 65, 85, 88, 90, 356, 10, 12, 14. (Item #: 126706, Ref: 180575M1) $15.00

Steering Cylinder Repair Kit - New series with plastic type piston rings and white backup washer. For tractor models 265, 275, 285, 290, 298, 30D, 50, 50B, (565, 575, 590, 670, 675, 690 all 2 wheel drive). VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Item #: 154784, Ref: 1606890M91) $24.80

Steering Sector Shaft Bushing - Used on Massey Ferguson models: 165, 168, 175, 178, 185, 188, 265, 275, 282, 285 (FR), 290, 375E Brazilian, 390E Brazilian, 50, 65. This bushing measures 1.500 inches inside diameter, 1.630 inches outside diameter, and is 1.780 inches long. Verify measurements or part number before ordering. Most of the listed tractors used more than one size. Replaces OEM numbers 1850517V1, 1850517M1 (Item #: 173342, Ref: 1850517M1) $9.50

Steering Wheel - For TO20, TO30, TO35, 35, 135, F40, 50, and 65. 17-3/4 inch diameter, 3/4 inch hub with 3/16 inch keyway. Covered Metal Spokes. (41486S) (Item #: 122474, Ref: 180576M1) $26.50

Steering Wheel - 36 splined center. For tractor models 165, 168, 175, 185, 188, 265, 285, 290, (565 up to serial number 6585483), (575 up to serial number 270719), (590 up to serial number 380795). Replaces original part numbers 1671945M1, 508460M2, 525681M2, 772868M1, 894737M1. (Item #: 152003, Ref: 1671945M1) $42.00

Steering Wheel - Original Type - For tractor models TE20, TEA20, TO20, TO30, TO35, 20, 35, 135, 50, 65, 2135. 17-3/4 inch diameter, 3/4 inch hub with 11/16 inch keyway. Metal Spokes. (Item #: 101418, Ref: 180576M1-OE) $27.30

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $8.00

Steering Wheel Nut - Zinc Plated Steel Nut, Steering Wheel Acorn Style. 5/8 - 18 NF thread. 1.132 inches tall. 1 inch wrench size. Replaces 207562, 70207562, 913133, 351103-S, 351103S, 751454R1, AL2315T, 195592M1 (Item #: 183746, Ref: 351103S) $9.00

Steering Wheel Washer - This steering wheel washer is 1.497 inch outside diameter, 0.645 inch inside diameter and is 0.180 inches thick. It is used on F40, TE20, TO20, TO30, TO35, 135, 35, 50, 65, 85, 88, 202, 204, 2135. Replaces 180577M1, 180577V1, TO3673. (Item #: 179684, Ref: 180577M1) $4.40

Steering Wheel, with Cap - This steering wheel comes with a cap. This is a dished steering wheel for a keyed Hub, 17-3/4 inch diameter, 6-1/4 inch dish. For tractor models 50, (65 late). NOTE: for some tractors, this wheel sits too far down, impacting the throttle and gauges. This can usually be resolved with washers or other shims. (Item #: 180730, Ref: 192432M2) $39.00

Thrust Bearing - Thrust bearing, front axle spindle. For industrials: 40B serial number 9A326404 and up, 50, 50A, 50C, 50D, 50E, 302, 304. For steering axle on forklifts: 2500, 6500, 6500H. For 2500, 302, 304, 40B, 50A, 50C, 50D, 50E, 50, 6500H, 6500. (Item #: 169780, Ref: 832961M1) $29.40

Tie Rod - A= 4.00", B= .812", 16 RH thread. For tractor models (50 multi-purpose), (65 utility SN# up to 685256), (88 western), (Super 90 wheat/rice). Replaces 189228M91. (Item #: 105047, Ref: 183388M91) $34.30

Tie Rod Assembly - Complete with long tie rod, inner tie rod, center tube and hardware. For tractor models (65 gas serial number up to 671680 and diesel up to serial number 667918), (50 serial number up to 528163), (765 serial number 526080 and up). This assembly contains; Outer Tie Rod 186235M91, Tie Rod Tube 182517M91, Inner Tie Rod End 182519M91 plus clamps and hardware. (Item #: 105275, Ref: 553321) $117.00

Tie Rod Assembly, Complete Left Hand - Comes with tie rod, tie rod long tube end, nut 3/8 inch-16 hex jam, cap screw 3/8 inch-16 X 3/4 inch, plus hardware. For tractor models 150, 50 serial number 528163-533422, 65 gas serial number 671618-692932, diesel serial number 667918-692932, also HD, 765 HD serial number 526081->. (Item #: 102505, Ref: 186146M91) $89.00

Tie Rod Assembly, Complete Right Hand - Includes outer adjustable tie rod, tie rod tube with clamp, tie rod, cap screw 3/8-16 X 2, washer 3/8 inch lock, nut 3/8-16 hex, cap screw 3/8-16 X 1, nut 3/8-16 hex jam. For tractor models 150, 32, 50 serial number 528163-533422, 65 gas serial number 671680-692932/diesel serial number 667918-69293, 99. (Item #: 102504, Ref: 186145M92) $142.00

Tie Rod Assembly, LH - For tractor models 150, 165, 50, 65. Contains: 192861M1 clamp, 192864M1 tie rod with end and 192866M1 tie rod, notched, left hand. (Item #: 105101, Ref: 553319) $101.00

Tie Rod Assembly, RH - For tractor models 150, 165, (50 serial number 533423 and up), (65 serial number 692932 and up). (Item #: 105056, Ref: 553318) $154.00

Tie Rod Clamp - For tractor models 150, 165, (50 serial number 533423 and up), (65 serial number 692932 and up). (Item #: 105060, Ref: 192861M1) $4.50

Tie Rod End - A= 7.50 inch, B= 1.00 inch, right hand thread. For tractor models 2500, (302, 304 serial number 11970021 and up), (356 serial number 670001371 and up), 50, 50A, 50C, 50D, 6500. (Item #: 105048, Ref: 193821M1) $92.00

Tie Rod End - A= 6.50 inch, B= .812 inch, 16 right hand thread. For tractor models 150, (65 gas serial number 671680-692932 and diesel serial number 667918-69293), (32, 99 with IDRS), (50 serial number 528163-533422). (Item #: 102510, Ref: 186077M92) $28.00

Tie Rod End - For Massey Ferguson tractor model 50, Compatible with Massey Ferguson Construction and industrial model 50A, 50C, 2500, 6500, Replaces Massey Ferguson OEM number 193822M1, 7.250" Long, Left Hand Thread, (Item #: 105049) $105.00

Tie Rod End, Front - Drag link end assembly, front. 3.75 inch to center of post, .812 inch-16 right hand thread. For drag links with adjustable end. For tractors: F40, MH50, MF50, MF65, MF135 Orchard, Deluxe and Special, MF150, MF165, MF175 industrials: 20, 35 utility, 202, 203, 204, 205, 356 tractors. Replaces: 182534M1, 182534V91, 847451M91, 884701M92 (Item #: 102503, Ref: 182534M91) $13.60

Tie Rod End, Inner Right Hand - Inner tie rod end, right hand, adjustable. 6 inches to center of post, .812 inch-16 right hand thread. For hi and lo clearance tractors. For tractor models MF50 and MH50 prior to tractor serial number 528163, MF65 gas prior to tractor serial number 671680, MF65 diesel prior to tractor serial number 667918. (Item #: 102509, Ref: 182519M91) $30.60

Tie Rod End, Outer Left Hand - Outer left hand tie rod end for hi and lo clearance tractors, 16 inches to center of post, .737 inch outside diameter. For tractors: MF50 and MH50 prior to tractor serial number 528163, MF65 gas prior to tractor serial number 671680, MF65 diesel prior to tractor serial number 667918. Replaces 182507M91. (Item #: 102507, Ref: 186235M91) $24.00

Tie Rod End, Outer Right Hand - Outer right hand tie rod end for hi and lo clearance tractors, 16" inches to center of post, .737 inch outside diameter and has 7 set screw holes. For tractors: MF50 and MH50 prior to tractor serial number 528163, MF65 gas prior to tractor serial number 671680, MF65 diesel prior to tractor serial number 667918. Replaces part numbers 880008M1 and AM186236M91. (Item #: 102508, Ref: 186236M91) $22.90

Tie Rod Tube - 17.250 inches long, .953 inch inside diameter. For tractor models 150, 165, (50 serial number 533423 and up), (65 serial number 692932 and up). (Item #: 105041, Ref: 192862M1) $52.00

Tie Rod Tube - 31.38 inches long, 1.250 inch outside diameter. For tractor models 302, 50, 50A, (356 with shovel blade or for lift). (Item #: 105044, Ref: 193820M1) $80.00

Tie Rod Tube - Comes with clamp, 19.00 inches long. For tractor models 150, (65 gas serial number 671680-692932 and diesel serial number 667918-69293), (32, 99 with IDRS), (50 serial number 528163-533422). (Item #: 105052, Ref: 186065M91) $15.31

Tie Rod Tube - For Massey Ferguson tractor model 50, Compatible with Massey Ferguson Construction and industrial model 90 (Super), 6500, Replaces Massey Ferguson OEM number 508556M3, 33.000" Long, 1.250" O.D., (Item #: 105050) $93.00

Tie Rod Tube, Left Hand - 15.380 inches in length, .758 inch inside diameter. For tractor models 150, (50 serial number up to 533422), (65 gas serial number up to 692932 / diesel serial number up to 692932), (765 HD serial number 526081 and up), F40. (Item #: 105055, Ref: 182510M91) $40.22

Tie Rod with End - This tie rod end comes with a Zerk fitting in the knuckle. The picture does not show this. Ensure you have clearance for the grease fitting to stick out the backside of the knuckle. A= 15.250 inch, B= .950 inch inside diameter. For tractor models 150, 165, (50 serial number 533423 and up), (65 serial number 692932 and up). (Item #: 105102, Ref: 192864M1) $52.00

Tie Rod, Inner Left Hand - Inner tie rod, left hand for hi and lo clearance tractors, overall length 15.25 inches. For tractor models MF50 tractor serial number 528163 to 533422, MF65 gas tractor serial number 671680 to 692932, MF65 diesel tractor serial number 667918 to 692932. (Item #: 105055, Ref: 186061M91) $40.22

Tie Rod, Notched, LH - 14.560 inches long, .937 inch diameter. For tractor models 150, 165, (50 serial number 533423 and up), (65 serial number 692932 and up). (Item #: 105045, Ref: 192866M1) $89.00

Tie Rod, Outer LH - 15.00 inch from center of ball joint to end of rod, 0.742 inch rod diameter. For tractor models 150, (65 gas serial number 671680-692932 and diesel serial number 667918-69293), (50 serial number 528163 to 533422) (150 HD), (765 HD serial number 526081 and up). Replaces 894173M91, 880008M92, 182507M91, 880003M1, 880088M91, 881884M91. (Item #: 105054, Ref: 186063M91) $31.80

Tie Rod, Outer RH - A= 15.00 inch, B= .742 inch. For tractor models 150, (65 gas serial number 671680-692932 and diesel serial number 667918-69293), (32, 99 with IDRS), (50 serial number 528163-533422). Replaces 881883M91, 880009M92. (Item #: 105051, Ref: 186066M91) $32.50

Tie Rode Tube, Right Hand - Tie rod tube, right hand, for hi and lo clearance tractors, overall length 18.375 inches. For tractors: MF50 and MH50 prior to tractor serial number 528163, MF65 gas prior to tractor serial number 671680, MF65 diesel prior to tractor serial number 667918. (Item #: 157771, Ref: 182517M91) $26.60

Tied Rod End - A=6.500 inch, B=1.00 inch, 16 UN thread. For tractor models 150, 165, 50 serial number 533423 and up, 65 serial number 692932 and up. (Item #: 105040, Ref: 192863M1) $68.00

No
Picture
Valve Adjustment Screw - This front axle valve adjustment screw is 3.9 inches long and is .750 diameter. For models 356, 150, 165, 168, 175, 178, 188, 265, 275, 282, 285, 290, 50, 65. (Item #: 165262, Ref: 182725M1) $8.70

Wheel Hub - Front Wheel Hub. Six bolt. For the following tractors: 35, 50, 65, MH50, TE20 (serial number to 49998 and 52497-52565), TO30, TO35. Replaces 180338M91, 898085M91. (Item #: 133657, Ref: 180338M92) $48.00

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 1008553M1, 1052262M91 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.20

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.70

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $15.10

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $9.10

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $8.70

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All MF50 Parts] [All Massey Ferguson Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy