FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 3165 Parts

Category: Steering

[Categories] [All MF3165 Parts] [All Massey Ferguson Models]

Axle Rear Center Pivot Bushing - 1.875 inch x 2.125 inch x 2.500 inch. For tractor models 165, 175, 245, 265, 275, 285, 30, 31, 3165. (Item #: 128540, Ref: 512980M1) $17.60

Bearing, Thrust Spindle - Bearing, Thrust Spindle. 1 1/2 Inch Inside Diameter, 2 19/32 Outside Diameter, 5/8 inch Wide. Replaces 1860036M3, 1868732M1, 196167M1, 3611413M1, 3599263M1 (Item #: 102474, Ref: 196167M1) $10.80

Bushing, Front Center Pivot - 1.875 inch x 2.062 inch x 1.125 inch. For tractor models 165, 174, 245, 255, 265, 275, 285, 30, 31, 3165. (Item #: 128539, Ref: 512979M1) $28.30

Drag Link Assembly - 43.75 inches long, .625 inch thread. For tractor models 3165, (175 with Continental Gas Engine), (165, 30 diesels). 505371M91. (Item #: 105039, Ref: 518434M91) $133.00

Front Axle Assembly with Pivot Bushing - For tractor models 165, 175, 255, 265, 275, 3165, 30, 31. (Item #: 167284, Ref: 512982M92) $461.00

Main Steering Arm - 43 spline. Spline Major Diameter: 1.850 inch, Minor Diameter: 1.770 inch. For 165, 175, 30, 31, 3165. Main Steering Arm. Replaces 534155M91 or 514281M91. Used with 523112M91 Center Steering Arm. (Item #: 102532, Ref: 534155M91) $71.00

Power Steering Cylinder Repair Kit - Power Steering Repair Kit for tractor models MF150, MF160, MF175, MF3165, MF30, MF65 and MF50 repairs 505339M92 and 505525M91 cylinders. Replaces OEM numbers 830860M91, 830860M92. (Item #: 167588, Ref: 830860M91) $52.00

Power Steering Cylinder Shaft and Piston - This Power Steering Cylinder Shaft and Piston is used on 165, 175, 3165, 30, 31. It replaces 1027231M91. Uses 9N675 rings, not included. (Item #: 179587, Ref: 1027231M91) $182.00

Power Steering Pump - Helical cut gear, 13 teeth, replaces Parker Hannifin. For 4 cylinder tractors: 65 diesel serial number 685996 and up, 165 diesel, MF255 gas (serial number 9A287064 and less). Industrials: 40B, 50A (serial number 9A113166 and above); diesels: 30, 302, 304, 356, 3165. Replaces 188772M92 and 518633M91. (Item #: 111837, Ref: 523090M91) $240.00

Power Steering Pump - Helical cut gear, 14 teeth, replaces Parker Hannifin. For tractors: 165 Perkins gas, 175, MF255 diesel, MF265 except with Hydrostatic Power Steering Pump, MF275; Industrials 30 gas, 31, 50C, 50D, 6500 Forklift. Replaces 505341M91, 518637M92, 523092M1 and 897146M94. (Item #: 112581, Ref: 523092M91) $245.00

Power Steering Pump Filter - Measures 1.02 inches inside diameter, 2.99 inches outside diameter, 1.61 inches height. For tractor models 11, Pony, 16, Pacer, 175, 180, 20, 202, 204, 2135, 2155, 2200, 230, 235, 245, 30, 302, 303, 304, 30B, 30D, 3165, 333, 35, 4500, 50, 50D, 555, 555D, 55D, 55G, 55K, 55LP, 65, 85, 88, Colt, FE35, FE35X, 50, Mustang, Pacemaker, TO30. VERIFY MEASUREMENTS of old filter. Replaces 1008553M1, 1052262M91, EP3, P183. (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Filter - This filter measures Overall height 64mm (2.5 inches), Outside Diameter 86mm (3.39 Inches), Inside Diameter 27mm (1.06 inches). It is used on some Massey Ferguson: 1080, 130, 165, 168, 175, 178, 180, 185, 188, 25, 30, 300, 302, 304, 3165, 3303, 50, 50A, 50B, 65. Replaces original part numbers 1883318M91, 1883318M1, 1883318M2, 1019235M91, 169743R91, CR447, 447, P551221, 37H1434 (Item #: 181652, Ref: 1883318M1) $8.10

Power Steering Seal Kit - For Parker Hannifin Model reference number D17X-01. Without rear plate. Repairs 523089M91, 523090M91, 523091M91, 523092M91 and 523093M91 Power Steering Pumps. Replaces PHPSKIT, PHPS-KIT, 1201-1621 for tractor models MF1080, MF1085, MF165, MF175, MF175, MF255, MF265, MF275, MF285, MF30, MF302, MF304, MF31, MF3165, MF40B, MF50, MF50A, MF50C, MF50D and MF65. (Item #: 113671, Ref: PSP-KIT2) $32.90

Spindle Bushing - 1.680 inch outside diameter, 1.50 inch inside diameter, 1.50 inches long. For tractor models 1080, 1085, 135, 165, 168, 175, 180, 185, 188, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 30, 302, 304, 30B, 30D, 30E, 3165, 360, 362, 392S, 40, 40B, 40E, 4500, 575, 590, 670, 675, 690, 765, 85, 88, 90. (Item #: 102482, Ref: 183086M1) $6.10

$Massey Ferguson 3165 Spindle Bushing\Bearing\Seal Kit$
Spindle Bushing/Bearing/Seal Kit - Kit includes (2) 196167M1 thrust bearings, (4) 183086M1 bushings, and (2) seals. For tractor models 135, 165, 168, 178, 185, 188, 20C, 20D, 20F, 202, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 255, 265, 270, 275, 282, 285, 30, 30B, 30D, 30E, 30H, 3165, 356, 392S, 40, 40B, 40E, 4500, 575, 590, 670, 675, 690, 765, 290HD, MH50 (Item #: 104972, Ref: 196165M1) $30.70

Spindle Thrust Washer - This Thrust Washer is used with 532480M92 and 508571M92 on Massey Ferguson 30, 3165, 1080, 1085, 165, 175, 180, 185, 255, 265, 275, 282, 285. 1-9/16 X 2-1/4 X 1/4 inches. Replaces 513800M1 (Item #: 104974, Ref: 513800M1) $12.20

Steering Arm - Main spline at 90 degrees to split. For tractor models (165 serial number 643003510 to 643011388), (175 serial number 644000638 and up), (3165 serial number 647000466 and up). (Item #: 102535, Ref: 194588M1) $67.00

Steering Arm Shaft, Center Upper - For tractor models (165 serial number up to 643011388), (175 serial number up to 644002127), (3165 serial number up to 647001441). (Item #: 105199, Ref: 194590M1) $33.40

Steering Arm, Center - 43 splines, 11.187 inch long shaft, 1.686 inch and 1.873 inch diameter. For tractor models 165, 175, 30, 31, 3165. (Item #: 102530, Ref: 523112M91) $375.00

Steering Arm, LH - For tractor models 165, 175, 255, 265, 285, 30, 31, 3165. (Item #: 102529, Ref: 194570M1) $38.80

Steering Arm, RH - For tractor models 165, 175, 255, 265, 285, 30, 31, 3165. (Item #: 102528, Ref: 194569M1) $37.10

Steering Arm, Upper - This Upper Steering Arm is for tractor models 165, 175, 30, 31, 3165 all with 523112M91 center steering shaft. The large hole is 1.687 inches, small hole is .312 inches. Tapered tie rod hole is .656 to .775 inches. (Item #: 102531, Ref: 514285M1) $107.00

Steering Gear Bracket - Steering gear to flywheel housing adapter plate. For tractor models (150, 165, 255, 30, 3165, 40B all with diesel engine). (Item #: 173264, Ref: 737181M1) $33.60

Steering Shaft - For tractor models 165, 175, 30, 31, 3165. (Item #: 182832, Ref: 1026257M91) $92.00

Steering Shaft Arm, Center Lower - 43 splines includes 1 double spline. Spline Major Diameter: 1.940 inch, Minor Diameter: 1.852 inch. For tractor models (165 serial number up to 6430011388), (175 serial number up to 644002127), (3165 serial number up to 647001441). (Item #: 102534, Ref: 194567M92) $83.00

Steering Shaft Crank Arm, Center - Dead spline is in 9:00 position. For tractor models (165 serial number up to 643011388), (175 serial number up to 644002127), (3165 serial number up to 647001441). (Item #: 102535, Ref: 510336M2) $67.00

Steering Wheel - 36 splined center. For tractor models 165, 168, 175, 185, 188, 265, 285, 290, (565 up to serial number 6585483), (575 up to serial number 270719), (590 up to serial number 380795). Replaces original part numbers 1671945M1, 508460M2, 525681M2, 772868M1, 894737M1. (Item #: 152003, Ref: 1671945M1) $42.00

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $8.00

Tie Rod - Tie rod end, left hand or right hand, outer. 15 inches to center of post, .742 inch outside diameter. Notched, adjustable. For tractors: MF165 except LP, MF175, MF255, MF265 except Orchard, MF275 Industrials: 30 Turf, 3165 Turf. (Item #: 105124, Ref: 1028262M91) $22.60

Tie Rod End - Tie rod end, left hand, inner. 4.812 inches to center of post, 1 inch outside diameter, female. For adjustable front axle on tractors: MF165 except LP, MF175, MF255, MF265, MF275 Industrials: 30, 31, 3165 Turf. For 30, 3165, 31, MF165, MF175, MF255, MF265, MF275. Replaces 1028098M1, 1028098M91, 1028098M92. (Item #: 102511, Ref: 1028098M1) $20.30

Tie Rod End, Front - Drag link end assembly, front. 3.75 inch to center of post, .812 inch-16 right hand thread. For drag links with adjustable end. For tractors: F40, MH50, MF50, MF65, MF135 Orchard, Deluxe and Special, MF150, MF165, MF175 industrials: 20, 35 utility, 202, 203, 204, 205, 356 tractors. Replaces: 182534M1, 182534V91, 847451M91, 884701M92 (Item #: 102503, Ref: 182534M91) $13.60

Tie Rod Tube - Tie rod tube with clamp, left hand, 13-3/8 inches overall length. For adjustable front axles on tractors: MF165 except LP, MF175, MF255, MF265 except Orchard, MF275 Industrials: 30 Turf, 3165 Turf. For 30, 3165, MF165, MF175, MF255, MF265, MF275. (Item #: 105122, Ref: 1028099M91) $23.00

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 1008553M1, 1052262M91 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.20

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.70

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $15.10

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $9.10

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $8.70

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All MF3165 Parts] [All Massey Ferguson Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy