FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 3060 Parts

Category: Steering

[Categories] [All MF3060 Parts] [All Massey Ferguson Models]

Axle Pivot Pin - For tractor models (375, 390, 390T, 398 serial number B18009 and up), 383, 393, 396, (399 with 1006.6 engine), 3060, 3065, 3075, 6150. (Item #: 151846, Ref: 3429319M1) $53.00

Axle Pivot Pin - For tractor models (154-4S, 174-4S axle serial number 01435 and up), 194-4F, 254-4, 274-4, 294-4, 360, 362, 364S, 390, 390T, 393, 394S, 396, 3050, 3060, 3065, 3075, 6150. (Item #: 151848, Ref: 3426523M2) $53.00

Castle Nut - Used as a steering arm nut and a spindle nut in different applications. It is 1 1/4 inch UNF thread. Replaces OEM part numbers: 353931X1, 882263M1, 882263V1, 882263M91 (Item #: 168996, Ref: 353931X1) $5.40

Front Axle Bushing - For Massey Ferguson tractor models 365, 375, 390, 3050, 3060, 3065, 4225, 4235, 4325, 4335 (all with AG75 4WD Axle), 6110, 6120, 6130, 6140, 6235, 6245 (all with AG85 4WD Axle), 6260, 6265 (all with AG105 4WD Axle), Replaces Massey Ferguson OEM number 3428571M1, (Item #: 151835) $6.60

Front Axle Tab Washer - For Massey Ferguson tractor models 165, 250, 253, 255, 270, 282, 283, 290, 298, 360, 375, 383, 390, 390T, 393, 398, 399, 670, 690, 698, 2640, 2675, 2705, 2745, 2775, 2805, 3050, 3060, 3070, 3120, 3140, 3525, 3545, 3630, 3650, Compatible with Massey Ferguson Construction and industrial models 20D, 20F, 30E, 30H, 40E, 50E, 50H, 60, 60H, 6500H, 6800H, Replaces Massey Ferguson OEM number 881384M1, Inside Diameter: 1.252"', Outside Diameter: 2.004", (Item #: 168997) $2.70

Hub Carrier Pivot Pin Bearing - For Massey Ferguson tractor models 154-4, 174-4, 253, 263, 265, 271, 281, 360, 375, 383, 390, 394, 398, 3050, 3060, 3075, 6150, 6235, 6245, 6255, 6265, Compatible with Massey Ferguson Construction and industrial models 50, 60, Replaces Massey Ferguson OEM number 3310930M91, 1042569M1, 1042596M1, 1175920, 303452395, 30-3452395, 3310930M1, AL79901, F199300020180, V31792200, VPJ2447, ZP0750119025, (Item #: 151849) $17.20

Hub Inner Seal - The measurements on this seal are 1.575 inches inside diameter, 2.169 inches outside diameter, and 0.315 inches thick. It is used in the hub of Carraro 4WD front axles. This part replaces 6190246M1, 118675, 1967605C1, CAR118675, 82848086, 3946626, 83946626, 83937304, 85807964, 83930043, 96839, 47110069, N8897, K260142, K205152, K965236, 1-33-741-636, 3541488M1, 3426192M1, 3019957X1 (Item #: 104714, Ref: CAR118675) $9.40

Orbital Steering Unit Seal Kit - For Danfoss Unit. Fits tractor models 1014, 1114 serial number 1110249 - 2422U38048, 1134 serial number 1240062 - 2424U41042, 20F, 265, 275, 285 with Hydro Static Steering, 290 with Hydro Static Steering, 298 with Hydro Static Steering, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3095, 30D, 3115, 3120, 3125, 340, 342, 350, 352, 353, 355, 360, 362, 363, 3635, 365, 373, 375, 377, 383, 387, 390, 390T, 393, 397, 398, 399, 40E Utility and Turf with Manual Shuttle Transmission, 50E, 550, 565, 575, 590, 595, 675, 690, 698, 698T. (Item #: 165413, Ref: 1810503M92) $29.80

Steering Arm Seal - For Massey Ferguson tractor models 50, 65, 85, 88, 135, 165, 175, 180, 230, 231, 235, 240, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 360, 362, 670, 690, 1080, 1085, 3050, 3060, 3065, 3070, 3075, 3090, 3095, 3120, 3125, 3630, 3645, 3650, 3655, Replaces Massey Ferguson OEM number 183021M2, VPJ2801, Under Steering Arm, (Item #: 118285) $1.00

Steering Cylinder Ball Joint - Tie Rod with Tube part description: Measures 4.130 inches from end of tube to center of knuckle. Tube end is female 28 x 1.5 threads. For tractor models 275UK, 283UK, 3050, 3060, 3065, 365, 375, 383, 390, 393, 396, 4225, 4235, 4243, 4245, 4253, 4255, 2463. Replaces 3599679M91, 3599679M92, 3599679H92, 3599679M91, 3599679M92, 3599679V92 (Item #: 105175, Ref: 3599679M91) $32.70

Tie Rod Center - Measuring 8.20 inches overall, with M22 X 1.5 Right Hand thread on one side and M24 x 1.5 Right Hand thread on the other. For the following MF models: 3050, 3060, 3065, 3095, 3120, 3125, 3140, 3610, 3630, 3635, 3645, 365, 3650, 3655, 3660, 3670, 3680, 3690, 375, 390, 390T, 396, 4225, 4235, 4245, 4255, 4260, 4265, 4270, 440 Brazilian, 5460, 5470, 5480, 6110, 6120, 6130, 6140, 6170, 6180, 6190, 6270, 6280, 6290, 6460, 6465, 6470, 6475, 6480, 6485, 6490, 6495, 6497, 6499, 7465, 7475, 7485, 7490, 7495, 8110, 8120, 8130, 8140, 8150, 8160, 8210, 8220, 8240, 8250, 8260, 8925, 8926, 8937, 8939, 8947. Replaces 1442486X1, 3426255R1, 346255M1, 3426255M1, 3428064M1, 7502445012, 4232169M1, 3903684V1, 83957792, CAR49013, 3909318M1, 3903684M1, 3903690M1. (Item #: 128527, Ref: AL80542) $72.00

Tie Rod Clamp - For Massey Ferguson tractor models 3050, 3060, 3070, 3090, 3120, 3140, 3630, 3650, 3655, 3660, 3680, 3690, 6150, 6170, 6180, 8120, 8140, 8150, 8160 (All W/2WD), Replaces Massey Ferguson OEM number 3104944M1, (Item #: 105179) $2.50

Tie Rod End - The Tie Rod is 7.86inches over all length. M18 x 1.5 RH thread. Replaces RE204878, 3426336V1, 3426336M1, 3626336M1 (Item #: 154428, Ref: RE204878) $78.00

Tie Rod End - Outer - For Massey Ferguson tractor models 3050, 3060, 3070, 3090, 3120, 3140, 3630, 3650, 3655, 3660, 3680, 3690, 6150, 6170, 6180, 8120, 8140, 8150, 8160 (All W/2WD), Replaces Massey Ferguson OEM number 3104945M1, Dimension A: 2.812", Dimension B: M24 x 1.5 LH Thread, (Item #: 105180) $38.30

No
Picture
Tie Rod with Tube - Measures 8.75 inches from end of tube to center of knuckle. Tube end is female 18 x 1.5 right hand threads. For tractor models 275UK, 283UK, 3050, 3060, 3065, 365, 375, 383, 390, 393, 396, 4225, 4235, 4243, 4245, 4253, 4255, 2463 all with AG75-85 4WD. (Item #: 105162, Ref: 3764027M2) $47.10

Universal Joint - The measurements on this Universal Joint are 27mm cup diameter and 82mm across. Side greaser included. This Universal Joint is used on Carraro 4WD front axles. Replaces OEM numbers CAR96867, CAR116859, 3230277R1, 3216550R91, 137700420834, 1967554C1, 84512487, NH80715, 9961774, 9962244, 87760752, K965331, CAR041121, CAR116859, 83934724, 81927841, ZP1927504, ZP1927841, 3230277R1, 84512487, 83957857, AL32885, 137700000000, 3475808M91, 3475808M1, 3427352M91, 1895699M1 (Item #: 156129, Ref: CAR96867) $37.10

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 1008553M1, 1052262M91 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.20

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.70

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $15.10

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $9.10

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $8.70

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All MF3060 Parts] [All Massey Ferguson Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy