FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 20C Parts

Category: Steering

[Categories] [All MF20C Parts] [All Massey Ferguson Models]

Axle Pivot Bushing - 1-7/8 inch x 2 inch x 1-3/8 inch. For tractor models 20C, 20D, 20E, 20F, 230, 231, 240, 240P, 245, 250, 253, 263, 30E, 360, 362, 40E. Replaces 1660457M1, 1660457M2 (Item #: 165406, Ref: 1660457M1) $11.40

Axle Pivot Pin - This Axle Pivot Pin measures 1.875 inches in diameter and is 9 inches long. Verify measurements. For tractor models (20C semi swept), 20D, 230 semi swept SN# 9A243032 and up), 245. (Item #: 165404, Ref: 544438M1) $58.00

Axle Stay Pin - For tractor models (20C, 230 semi swept), 245. Used with 544438M1 pivot pin. (Item #: 165405, Ref: 578172M1) $43.80

Bearing, Thrust Spindle - Bearing, Thrust Spindle. 1 1/2 Inch Inside Diameter, 2 19/32 Outside Diameter, 5/8 inch Wide. Replaces 1860036M3, 1868732M1, 196167M1, 3611413M1, 3599263M1 (Item #: 102474, Ref: 196167M1) $10.80

Gasket, Steering Box Mounting - For tractor models F40, FE35, TO35, 1080, 1085, 135, 150, 165, 165 UK, 175, 175 UK, 178, 180, 20, 20C, 2135, 230, 231, 235, 245, 255, 261, 265, 282, 285, 30, 30B, 31, 40B, 50A, 50C, 50D, 35, 35 UK, 40, 50, MH50. Replaces 520307M1, 5230307M1, 180511M1, 180511M2, 180511M92 (Item #: 168134, Ref: 180511M2) $4.30

Jam Nut - For the following tractors: 20C, 1080, 1085, 180, 185, 230, 245. Replaces 1028269M1. (Item #: 105123, Ref: 192928M1) $8.40

Power Steering Cylinder - Replaces 1749213M91 and 1749214M91. Massey Ferguson 20C, 30B, 40B, 235 (Orchard), 245 (Orchard), 4500. All dimensions must be checked with original before ordering. On some models, the early model cylinder is shorter. For right hand or left hand. Barrel length 12.250 inches. Bore 1.625 inches, center to center 15.500 inches collapsed, 23 inches extended, rod diameter 0.875 inches, taper length 0.695 inches - .781 inches. Taper on ends, thread size 5/8 inch - 15 thread. Verify part number before ordering. (Item #: 128548, Ref: 1749213) $220.00

Power Steering Cylinder End - The Power Steering Cylinder End is used on Massey Ferguson 230, 245 and 20c Tractors. Replaces 1050038M91 (Item #: 179566, Ref: 1050038M91) $40.00

Power Steering Filter - This Power Steering Filter is closed on one end with a spring, and open on the other end. It measures 2 Inches Outside Diameter, 1/2 Inch Inside Diameter, and 1-1/2 Height. If the canister o-ring is needed, order 1055980M1 separately. Replaces 1852097M1, 1052097V1, 1052097M1 (Item #: 183589, Ref: 1852097M1) $10.60

Power Steering Pump - Straight cut gear, 13 teeth, includes drive gear, reservoir and adjustable relief valve preset at 1500 PSI. BARNES style pump, hose fittings on gear side of pump. Does not come with mounting gasket. We do not have a gasket available. For tractors using Perkins 3 Cylinder Gas or Diesel Engines. Models: 35, 50, 135, 150, M230, MF235, MF245, MF250, 135, 230, 231, 240, 245, 250, 2500, 253, 35, 4500, 50; Industrials: 20, 20C, 30B, 30D, 30E, 40, 203, 205, 2135, 2200; Forklifts: 2500, 4500. Replaces Massey Ferguson 193208M91, 518369M92, 527904M91, 773126M92, 527904M93, 527904M92, 773126V92. Replaces J.S. Barnes: 1000013, GC-5060-A-GA-7, GC-5060-A-GA-5, GC-5060-A-GA-2 NOTE: This pump is 4.00 inches deep. If you need a shallower pump order 527904M91 (Item #: 119845, Ref: 773126M92) $160.00

Power Steering Pump O-Ring - Used on Barnes power steering pumps. This o-ring should be replaced with changing your filter. Replace OEM numbers 70923825, 1055980M1, 359117X1 (Item #: 178036, Ref: 1055980M1) $2.10

Seal, Power Steering Pump Driveshaft - For tractor models 135, 20, 200, 20C, 20D, 20E, 2135, 2200, 230, 235, 240, 245, 250, 2500, 30B, 30D, 30E, 35, 40, 4500, 50, MH50, 65, TO30. Verify measurements of 1.002 inches outside diameter, .437 inches inside diameter and .375 inches in width. (Item #: 173648, Ref: 1751651M1) $6.40

Spindle Bushing - Spindle Bushing for tractor models 135, 148, 20, 20C, 2135, 230, 235, 240, 250, 35, FE135, FE35, TE20, TO20, TO30, TO35. Bushing Measures 1.395 inches outside diameter X 1.265 inches inside diameter X 1.5 inches long. (Item #: 102473, Ref: 180345M1) $2.80

Spindle Bushing - 1.680 inch outside diameter, 1.50 inch inside diameter, 1.50 inches long. For tractor models 1080, 1085, 135, 165, 168, 175, 180, 185, 188, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 30, 302, 304, 30B, 30D, 30E, 3165, 360, 362, 392S, 40, 40B, 40E, 4500, 575, 590, 670, 675, 690, 765, 85, 88, 90. (Item #: 102482, Ref: 183086M1) $6.10

$Massey Ferguson 20C Spindle Bushing\Bearing\Seal Kit$
Spindle Bushing/Bearing/Seal Kit - Kit includes (2) 196167M1 thrust bearings, (4) 183086M1 bushings, and (2) seals. For tractor models 135, 165, 168, 178, 185, 188, 20C, 20D, 20F, 202, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 255, 265, 270, 275, 282, 285, 30, 30B, 30D, 30E, 30H, 3165, 356, 392S, 40, 40B, 40E, 4500, 575, 590, 670, 675, 690, 765, 290HD, MH50 (Item #: 104972, Ref: 196165M1) $30.70

Spindle, LH - This spindle measures A= 11.875 inch, B= 1.495 inch, C= 1.796 inch, D= 1.312 inch. For tractor models 20C, 30B, 30D, (235, 245, 250 Orchards). The wheel bearing kit used for this spindle is part number WBKMF5. (Item #: 104983, Ref: 674386M93) $199.00

No
Picture
Spindle, Right Hand - This Spindle is for Massey Ferguson INDUSTRIAL/CONSTRUCTION: 20C, 30B, 30D, 40B (serial number <-9A326404). Massey Ferguson TRACTOR: 235 (ORCHARDS), 245 (ORCHARDS) and 250 (ORCHARDS). Vertical shaft length 11.875 inches, shaft diameter 1.495 inches, spindle inner bearing diameter 1.796 inches and outer bearing diameter 1.312 inches. The wheel bearing kit used for this spindle is part number WBKMF5. Replaces 674385M93, 674385M92, 674385V93 (Item #: 104982, Ref: 674385M93) $166.00

Steering Arm, Center - 43 splines, 9.218 inch long shaft, 1.873 inch shaft diameter. For tractor models 135, 150, 20, 20C, 230, 235, 245, 255. (Item #: 105211, Ref: 532219M92) $379.00

Steering Control Valve Upper Seal Kit - This Steering Control Valve Upper Seal Kit is used on Ross, TRW, and Hydraguide Steering Valves (Steering Motors). Replaces 123465C1, 132554, 224712C1, 517416, 837253M91, 86585473, A47038, F1NN3N991A (Item #: 140493, Ref: HG500007) $37.00

Steering Wheel - Steering wheel, 17-3/4 inch diameter, deep dish, 7/8 inch 36 spline hub. For tractor models MF230 with power steering to serial number 9A349239 and late production manual, MF235 with power steering serial number 9A214239 and up except Orchard Diesel, MF245 to serial number 9A349239, MF255 to serial number 9A324137, MF26. Replaces 772868M1, 508460M2, 894737M1, 525681M2, 1671945M1, 772064M1 (Item #: 152003, Ref: 1671945M1) $42.00

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $8.00

Tie Rod - Tie rod end, left hand, slotted, 32.843 inch to center of post, .937 inch outside diameter, includes boot and grease fitting. For semi-swept adjustable axle on tractors: MF230 tractor serial number 9A243032 and up, MF245 including Vine and Narrow Orchard Industrial: 20C Turf. For 20C, MF230, MF245. (Item #: 102514, Ref: 1048272M91) $44.20

Tie Rod - Tie rod end, threaded, includes boot and grease fitting. 3.840 inch to center of post, 1 inch-16 right hand threads. For semi-swept adjustable axle on tractors: MF230 tractor serial number 9A243032 and up, MF245 including Vine and Narrow Orchard Industrial: 20C Turf. For 20C, MF230, MF245. Replaces 1048273M92, 1048273M91. (Item #: 102515, Ref: 1048273M92) $16.60

Tie Rod End - Ball joint end assembly, for power steering cylinder with thread measurement going to the cylinder being 1/2 inch, fine thread. For tractor models MF235 Orchard Diesel, MF245 orchard with cylinder 519283M91, 519284M91, 532225M91 or 532226M91, MF265 serial number 9A324139 and up with cylinder 579149M91 and 579160M91, MF285 serial number 9A281393 and up Industrial. Replaces 1033035M92, 1033035M1. (Item #: 102498, Ref: 1033035M92) $20.50

Tie Rod End (LH) - Used on the Left side of Massey Ferguson 4500 Forklift, 20C, 30B, 30D, 40B, 235 Orchard serial number 9A253749 and up, 245 serial number 9A253749 and up. The measurements on the tie rod end are A - 4.380 inches, B - .687 inch-18 LH Thread. Replaces 674394M91 (Item #: 160177, Ref: 674394M91) $46.80

Tie Rod End (RH) - Used on the right side of Massey Ferguson 4500 Forklift, 20C, 30B, 30D, 40B, 235 Orchard serial number 9A253749 and up, 245 serial number 9A253749 and up. The measurements on the tie rod end are A - 4.380 inches, B - .687 inch-18 RH Thread. Replaces Massey Ferguson part number 674393M91. (Item #: 160176, Ref: 674393M91) $44.90

Tie Rod Tube - With an overall length of 38.440 inches, this tube has 0.687 inch-18 RH Thread on one end and 0.687 inch-18 LH Thread on the other. The outside diameter is 1.00 inch. It is used with 193067M1 RH Jam Nut, 193068M1 LH Jam Nut, 674393M91 Tie Rod End and 674394M91 Tie Rod End (all sold separately). It is used on Massey Ferguson 4500 Forklift, 20C Industrial, 30B Industrial, 30D Industrial, 40B Industrial, 235 Orchard Diesel below serial number 9A210647, 245 Orchard serial number 9A253749 and up. Replaces Massey Ferguson part number 674395M1 (Item #: 105033, Ref: 674395M1) $109.00

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 1008553M1, 1052262M91 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.20

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.70

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $15.10

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $9.10

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $8.70

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All MF20C Parts] [All Massey Ferguson Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy