FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 185 Parts

Category: Clutch

[Categories] [All MF185 Parts] [All Massey Ferguson Models]

Carrier - Carrier for clutch release bearing. Carrier bore 2.228 inch (2-1/4 inch approximately), outside diameter 2-1/2 inch. PLEASE CHECK CARRIER BORE BEFORE ORDERING. This part is used on many Massey Ferguson Agriculture and Industrial Models. Replaces 519232M1, 886727M1, 886727M2, 886727M3, 886727T4 (Item #: 112309, Ref: 886727M4) $14.50

Clutch Finger Kit - This Clutch Lever Kit contains (10) 376123X1 nuts, (3) 891827M1 pins, (3) 889910M1 springs, (3) 887898M1 levers, (3) 891826M1 pins, (3) 1853164M1 bolts. For tractor models 135, 148, 155, 158, 165, 168, 178, 185, 188, 230, 240, 250, 265, 275, 285, 290, 298, 340, 350, 355, 360, 365, 375, 390, 390T, 398, 399, 550, 565, 570, 590, 595, 675, 690, 698, 698T, 699. Used on 10 and 12 inch Double Clutch. (Item #: 173290, Ref: VPG6001) $34.70

Clutch Fork Shaft, LH - This Clutch Fork Shaft is the left (long) side. It measures 1 inch in diameter by 5-17/32 inches long. It is used with: 184592M1 bushing, 886719M1 fork and 180449M1 RH shaft (each sold separately). Replaces 180444M1, 180444M2, 1679460M1 (Item #: 166103, Ref: 180444M1) $14.60

Clutch Kit, 12 inch - Our new 12 inch double clutch kit contains: 12 inch, 25 spline, double pressure plate assembly with heavy duty springs (1868005M92); 12 inch, 10 spline, rigid drive disc (3599462M92); new pilot (C5NN7600A) and release (83914247) bearings, and clutch alignment tool. For tractor models 165, 175, 175 UK, 178 UK, 185, 20D, 20E, 231, 240P, 240S, 253, 261, 263, 265S, 270, 271, 271X, 271XE, 275, 281, 281X, 281XE, 282, 283, 285, 285S, 383, 390, 471, 481, 670, 690. (Item #: 112310, Ref: 1212-1490) $410.00

Clutch Release Bearing Carrier Spring - This Clutch Release Bearing Carrier Spring is used on many Massey Ferguson models. It is 2-1/8 Inch Overall Length. It replaces 1867690M1, 193334M1, 509230M2, 180451M1, 509230M2, 180451M2, 1867690M2. (Item #: 128535, Ref: 1867690M2) $4.30

Clutch Release Carrier Fork Locking Screw - This Clutch Release Carrier Fork Locking Screw is used to secure the release fork to the shaft on many Massey Ferguson models. Two used per tractor. Sold individually. It replaces Massey numbers: 881114M1, 881144M1, 881144M2, 3771408M1, 3790757M1, 180002M1 (Item #: 182943, Ref: 881144M1) $5.10

Clutch Release Fork - For tractor models 1200, 135, 135UK, 148, 155, 158, 165, 168, 175, 178, 185, 188, 20C, 20D, 20E, 20F, 230, 231, 235, 240, 245, 250 Brazilian, 253, 255, 261, 265, 270, 275, 282, 283 Brazilian, 290, 292 Brazilian, 297 Brazilian, 298, 299 Brazilian, 30B, 30D, 30E, 30H, 35, 35X, 375E Brazilian, 390E Brazilian, 40B, 40E, 415 Brazilian, 425 Brazilian, 435 Brazilian, 440 Brazilian, 445 Brazilian, 460 Brazilian, 465 Brazilian, 475 Brazilian, 481 Brazilian, 492 Brazilian, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 60H, 65. Replaces 886719M1, 184628M1 (Item #: 179512, Ref: 886719M1) $58.00

Clutch Release Shaft - For tractor models 1200, 135, 135UK, 148, 165, 168, 175, 178, 178UK, 185, 188, 20C, 20D, 20E, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 290, 298, 30B, 30D, 30E, 30H, 35, 35X, 375E, 390E, 40, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 60H, 65, TO35, MH50. This Shaft is 1 inch diameter X 3 19/32 inches long. (Item #: 165437, Ref: 180449M1) $8.30

Clutch Spring - For tractor models 135, 148, 165, 168, 175, 178, 185, 188, 240, 250, 265, 275, 290, 35, 375, 390, 398, 550, 565, 575, 590, 595, 65, 675, 690, 698. All with multi power transmissions. (Item #: 169497, Ref: 186519M1) $3.90

Clutch-Pressure Plate, Dual - Dual pressure plate, heavy springs, 12 inch with 25 spline 1 5/8 inch hub PTO disc. Replaces 1860005M1, 1868003M91, 1868005M91, 1868005M92, 3601268M91, 3610268M91, 3610268M92, 3610268V92, 1867438M91 (Item #: 163357, Ref: 3610268M91) $397.00

Pilot Bearing - For tractor models 1004, 1004T, 105, 1080, 1085, 130, 133, 135, 140, 145, 148, 150, 152, 155, 157, 158, 165, 168, 175, 177, 178, 180, 185, 188, 20, 202, 203, 204, 205, 20B, 20C, 20D, 20E, 20F, 20H, 2135, 2165, 220, 2200, 230, 235, 240, 245, 25, 250, 253, 255, 260, 2620, 2625, 2640, 2645, 265, 2680, 2685, 270, 2720, 2725, 275, 282. Replaces OEM 828123M2. (Item #: 107933, Ref: C5NN7600A) $3.40

No
Picture
Pressure Plate - For Massey Ferguson tractor models 133, 135, 140, 148, 155, 165, 168, 175, 178, 185, 188, 340, 342, 350, Compatible with Massey Ferguson Construction and industrial models 500, Replaces Massey Ferguson OEM number 3620408M91, Spline Count: 10, Splines Diameter: 1.750", (Item #: 169849) $568.00

Release Bearing - Sealed Release Bearing for single and dual clutch, 2.50 inch inside diameter, 3.936 inch outside diameter. For tractor models 1080, 1085, 1100, 1130, 130, 133, 135, 140, 145, 148, 150, 152, 155, 157, 158, 165, 168, 175, 177, 178, 180, 185, 188, 20, 202, 203, 204, 205, 20B, 20C, 20D, 20E, 20F, 20H, 2135, 2165, 2200, 220, 230, 235, 240, 245, 250, 255, 260, 265, 270, 275, 282, 285, 290, 298, 30, 302, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35. Replaces original part numbers 892862M2, 892862M1, 86534551 and 195508M1. (Item #: 112189, Ref: N1585) $23.20

Release Bearing Carrier - Carrier, for clutch release bearing. Carrier bore 2.130 inch (2-1/8 inch approximate); outside diameter 2.503 inch (2-1/2 inch). PLEASE CHECK CARRIER BORE BEFORE ORDERING. For single or dual clutch. Tractors: TO35, MF35, MF50, MF65. Industrials: 20, 202, 203, 302, 2135. Use with bearing 892862M2 for DUAL CLUTCH ONLY. This is the old style for retainers with bronze bushing. (Item #: 165363, Ref: 183129M2) $21.70

Universal Parts and Accessories
Category: Clutch

Tractor Splitting Stand Heavy Duty - HEAVY DUTY - Tractor Splitter for servicing higher horse power tractors safely. Max supported weight 20, 000 per jack stand. Minimum Height: 19.6 inches (23.6 inches with extension). Maximum Height: 29.1 inches (33 inches with extension). Rail Length 156 inches, Width 23.6 inches. Safety locking bolts on each jack stand. CE Certified. This item ships truck freight. Please call to order. (Item #: 133346, Ref: 150442) $2039.01

Tractor Splitting Stand Kit with Rails - This Tractor Splitting Kit is constructed with two splitting jack stands which are manufactured with a set of metal wheels to ride on the steel rails. The kit is designed to assist with the process of splitting tractors effortlessly, efficiently, and safely while performing tractor repairs, maintenance, and inspections. Features: 118 inch slide rail for the movement of jacks stands, 2 jacks stands and support fixings, 1 support handle to assist the adjustment, 2 height extensions enabling the height to be increased by 4 inches, Gross Weight approximately 176 lbs., Maximum Supported weight 10, 000 lb. per jack stand, Minimum Height: 14.5 inches / 18.5 inches (with extension), Maximum Height: 23.75 inches / 27.75 inches (with extension). This item ships truck freight. Please call to order. (Item #: 165543, Ref: 119888) $1059.01

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Clutch

[Categories] [All MF185 Parts] [All Massey Ferguson Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy