(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


John Deere 4010 Parts

Category: Gauges

[Categories]   [All 4010 Parts]   [All John Deere Models]  


John Deere 4010 Fuel Gauge
Fuel Gauge
- This Fuel Gauge is Negative ground. For tractor models 1010, 2010, 2510, 3010, (3020 up to SN# 122999), 4010, (4020 up to SN# 200999), 5010, (5020 up to SN# 24999). Replaces AR46271, AT27153, RE54427. Ensure it is installed as Negative Ground or it will not work and damage the gauge. (Part No: R34262)
$40.02

John Deere 4010 Fuel Gauge
Fuel Gauge
- This Fuel Gauge is Positive ground. For tractor models 1010, 2010, 2510, 3010, (3020 up to Serial Number 122999), 4010, (4020 up to Serial Number 200999), 5010, (5020 up to Serial Number 24999). Replaces AR46271, AT27153, RE54427. Ensure it is installed as Positive Ground or it will not work and damage the gauge. (Part No: R34262P)
$40.02

John Deere 4010 Fuel Sending Unit
Fuel Sending Unit
- This fuel sending unit fits the following tractor models: 500 (Gas serial number 67999 and below), 860 and 860A (serial number 001000 and below), 3010, 3020 (serial number 122999 and below), 4010, 4020 and 600 (serial number 200999 and below). Replaces part number AR26434. (Part No: AR26434)
$42.46

John Deere 4010 Tachometer Cable
Tachometer Cable
- 33" long. For tractor models 3010, 3020, 4010, 4020, 4320, 4520, 4620. (Part No: AR26721)
$16.13

John Deere 4010 Tachometer With Red Needle
Tachometer With Red Needle
- This tachometer with red needle was used thru 1968. It has no provision for illumination or fiber optics. It is used on the following Gas & Diesel Tractors with Syncro range transmission: 3010, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, Industrial 700. Replaces original part numbers: AR26718, AR30143, AR32833, AR39906, AR39908, AR45444, AR48021, AR50406, RE206855, AR50402 (Part No: RE206855)
$124.13

John Deere 4010 Tachometer With White Needle
Tachometer With White Needle
- This tachometer with white needle has the provision for illumination and fiber optics. It is used on the following Gas & Diesel Tractors with Syncro range transmission: 3010, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, Industrial 700. Replaces original part numbers: AR26718, AR30143, AR32833, AR39906, AR39908, AR45444, AR48021, AR50406, RE206855 (Part No: AR50406)
$182.85

John Deere 4010 Water Temperature Gauge
Water Temperature Gauge
- This water temperature gauge has a 29 inch capillary lead a 2.036 inch housing outside diameter It has no provision for fiber optic light. Fits 3010, 4010 gas and diesel. Replaces: AR26720, AR31901 (Part No: AR31901)
$42.74



John Deere 4010 Ammeter Gauge
Ammeter Gauge
- 60-0-60, 12 volt, 2 inch body diameter. Not illuminated. (Part No: AMG60)
$2.99

John Deere 4010 Hourmeter
Hourmeter
- DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Part No: HM771)
$46.42

John Deere 4010 Hourmeter, Analog
Hourmeter, Analog
- 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672)
$38.40

John Deere 4010 Oil Gauge Copper Line Kit
Oil Gauge Copper Line Kit
- Universal, for tractors using 1/8 inch x 6 foot copper oil line. Includes 6 foot 1/8 inch line, 2 inch x 5/16 inch-24 UNF nuts, 2 compression sleeves, and a 1/8 inch-27 NPTF female to 5/16 inch-24 UNF male adapter. (Part No: UNI523)
$25.20

John Deere 4010 Oil Line Adapter
Oil Line Adapter
- Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Part No: 919095)
$13.95

John Deere 4010 Oil Line Adapter
Oil Line Adapter
- Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/4 inch tube. Brass. (Part No: IHS626)
$12.95

John Deere 4010 Oil Pressure Gauge
Oil Pressure Gauge
- Universal Complete assembly with oil tube and mounting hardware. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Part No: SSW0002)
$8.62

John Deere 4010 Temperature Gauge
Temperature Gauge
- Universal water temperature gauge (0-280 degree scale). Fits tractor model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1/2 inch or 3/4 inch male adapter, engine block or radiator threaded hole. (Part No: 1042944)
$23.78

John Deere 4010 Temperature Gauge, Universal
Temperature Gauge, Universal
- For 2 inch mounting hole. Complete assembly with bracket and adapters for block. Fitting for lead is 3/8 inch NPT and 1/2 inch NPT adapter. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77 inch capillary line. Fits all liquid cooled engines. (Part No: UTG50)
$16.20

John Deere 4010 Temperature Gauge, Universal
Temperature Gauge, Universal
- Heat indicator for 2 inch hole. Complete assembly with bracket and adaptors. Numeric Face. Install in block, head or hose. Dial calibrated to 250 degrees. 70 inch metal wrapped capillary line. (Part No: UTG25)
$22.02

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Gauges

[Categories]   [All 4010 Parts]   [All John Deere Models]  







PayPal


Customer Service
Monday - Friday
9:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure


  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2018 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.