FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 2550 Parts

Category: Steering

[Categories] [All 2550 Parts] [All John Deere Models]

No
Picture
Back-Up Ring - For John Deere tractor models 1640 (s/n 429999-earlier, Europe), 1840 (s/n 429999-earlier, Europe), 2040 (s/n 429999-earlier, Europe), 2350, 2355, 2550, 2555, 2750, 2755, 2855N, 2940, 2950, 2955 (s/n 765516-earlier), 3040, 3055, 3140, 3150, 3155, 3255, Compatible with John Deere Harvester (s) 5720, 5730, 5820, 5830, 7445, 7450, 7455, 9930, 9935, 9960, 9965, 9970, 9976, Replaces John Deere OEM number L58009, Back-up Ring for Hydrostatic Steering Unit, (Item #: 165395) $32.26

Ball Joint - Length is 5.00", female end diameter is 1.125" I.D.. Fits 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1530, 1550, 1630, 1640, 1641F, 1750, 1950N, 2020, 2120, 2150, 2155 (with SWEPT BACK AXLE), 2250, 2251N, 2255, 2350, 2355, 2355N (with SWEPT BACK AXLE), 2450, 2550, 2555, 2755, 2855 (with SWEPT BACK AXLE), 820, 830, 840, 920, 930. Replaces: DE16303, 14M3290, AL39020, AL68629, AT27130 (Item #: 102248, Ref: AL39020) $29.50

Ball Joint, 13 Notch - Measure 14.509 inches from center of ball joint to the end of the shaft. The shaft is 0.781 inches in diameter. For tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1850, 1950, 2020, 2120, 2150, (2155 with straight axle), 2250, 2350, 2355, 2550, 2555, 2755. Replaces John Deere part numbers AL178098, AL39024 (Item #: 102246, Ref: AL39024) $26.50

Bellcrank - For John Deere tractor models 1640, 1840, 2040, 2040S, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2755, 2850, Replaces John Deere OEM number AL55149, (Item #: 104921) $188.00

Center Steering Arm Pin Bushing - Two of these bearings are used in many application. This bearing measures 1.377 inches inside diameter, and 2.441 inches outside diameter. This bearing replaces JD10137, AL112628, 32007. (Item #: 179918, Ref: JD10137) $28.67

No
Picture
Differential Cross Shaft, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040 (s/n 430000-later), 2040 (s/n 350000-later), 2040 (s/n 349999-earlier), 2040S (s/n 430000-later), 2120, 2130, 2140 (s/n 430000-later), 2150, 2155, 2240 (s/n 350000-later), 2240 (s/n 349999-earlier), 2255, 2350, 2355, 2355N, 2550, 2555, 2750, 2755, 2840, 2855N, 2940, 2955 (s/n 765516-earlier), 3030, 3040 (s/n 430000-later), 3055, 3120, 3130, 3140 (s/n 430000-later), 3150, 3155, 3255, Compatible with John Deere Combine(s) 1165, 1175, 4425, 4435, Replaces John Deere OEM nos L29226, T21875, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436093) $20.01

Differential Pinion Bearing - Used on Mechanical Four Wheel Drive axles APL325, APL335, APL345, APL350, and APL355, this bearing is used with the pinion gears closest to the hub. Replaces E2NN1N055AA, 135700421044, 81326C1, 83927802, 83934020, 153317487, 1429562, M382179, 1-31-742-032, 04350447, F198300020650, E1NN1N055AB, JD10250, AL39377. (Item #: 112468, Ref: 81326C1) $43.50

Differential Pinion Bearing - Used on mechanical four wheel drive front ends, this open roller bearing measures 1.42 inches inside diameter, 2.28 inches outside diameter and 0.78 inches wide. Replaces OEM numbers International Harvester - 81326C1, Ford/New Holland - 83934020, E2NN1N055AA, John Deere - AL39377, JD10250 (Item #: 112468, Ref: VPJ2550) $43.50

No
Picture
Differential Thrust Washer, Used - For John Deere tractor models 1030, 1130, 1630, 1640 (s/n 430000-later), 1830, 2030, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2130, 2140 (s/n 430000-later), 2150, 2155, 2155 (s/n 765146-earlier), 2255, 2350, 2355, 2355N, 2550, 2555, 2651, 2750, 2755, 2840, 2855N, 2940, 2950, 2951, 2955 (s/n 765516-earlier), 3030, 3030 (s/n 184540-later), 3055, 3120, 3130, 3130 (s/n 184540-later), 3141, 3150, 3155 (s/n 738221-earlier), 3255, 3351, 3640, 3641, 3651, Replaces John Deere OEM number L31793, For a new version of this item use Item #: 161853, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 449535) $4.76

Differential to Axle Housing Seal - On ZF Axles, this o-ring goes between the deferential case and the axle housing. Used on APL 325 and APL 335 axles. Replaces E1NN3N267AA, 81279C1, 83927734, L40306 (Item #: 156189, Ref: E1NN3N267AA) $2.20

Drag Link Assembly - This Drag Link Assembly is used on 1640, 1840, 2040, 2040S, 2140, 2350, 2550, 2650, 2650N, 2850, 2355, 2555, 2755, 2855N. Replaces OEM Part Numbers AL38638, AL82836 (Item #: 165952, Ref: AL38638) $86.00

Final Drive Shaft - Used in Mechanical Four Wheel Drive front ends, this part replaces: E1NN3A328AB, L40029, 81453C1, 83927740, 83934903. It has 18 teeth on both ends. (Item #: 124721, Ref: L40029) $95.00

Front Axle Bushing - For John Deere tractor models 1020, 1520, 1640, 1840, 2020, 2030, 2040, 2150, 2155, 2250, 2350, 2355, 2440, 2450, 2550, 2555, 2630, 2640, 2750, 2755, 2850, 2855, Replaces John Deere OEM number T21553, (Item #: 121434) $9.90

Front Axle Pin - This Pin Measures 1.575 inches outside diameter and is 3.735 inches long. Replaces John Deere part numbers L55437, AL55410, 47M7003, L34070 (Item #: 161647, Ref: L55437) $38.30

Half Shaft Bushing - Used on ZF MFWD Axles this busing measures 1.462 inches inside diameter, 1.616 outside diameter, and 1.259 long. Replaces OEM numbers 81429C2, 81429C1, 83956842, L40017, L60747, ZP0730260617. Used on John Deere 1550, 1640 serial number 430000 and up, 1750, 1850, 2040 serial number 430000 and up, 2040S serial number 430000 and up, 2155, 2350, 2355, 2355N, 2550, 2555, 2650, 2650N, 2855, 2855N (Item #: 124593, Ref: L60747) $12.80

Half Shaft Bushing - Measuring 1.457 inches inside diameter, 1.638 inches outside diameter and 1.024 inches wide, this is the inner bushing on ZF APL325 Mechanical Four Wheel Dive axles. Replaces OEM part numbers 81410C2, 83956843, L60748, L40018, ZP0730260616. This front axle can be found on the following John Deere models: 1550, 1640 serial number 430000 and up, 1750, 1850, 2040 serial number 430000 and up, 2040S serial number 430000 and up, 2155, 2350, 2355, 2355N, 2550, 2555, 2650, 2855N (Item #: 124592, Ref: L60748) $14.20

Hub Seal, Inner - Found in many MFWD (mechanical four wheel drive) front ends, this seal measures 4.80 inches inside diameter, 5.90 inches outside diameter, 0.53 inch width. It replaces OEM numbers 81869544, 83946025, 83932098, 83927796, E1NN1214AC, 1456320, ZP0734309421, ZP0750110140, ZP0734317062, ZO0750110147, ZP0750110147, AL68210, 84295352, 81311C1, 1964235C1, 1964235C2, 81309C1, 81310C1 (Item #: 124718, Ref: ZP0750110147) $58.00

Hub, Front Wheel, 6 Bolt - 6 Bolt Hub uses p/n WBKJD3 wheel bearing kit and p/n WB916 Bolt set (available separately). Fits 1020, 1030, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1641F, 1750, 1850, 1950, 2020, 2040, 2120, 2155, 2240, 2255, 2350 (Low profile), 2355 (Mid-Hi axle), 2355N, 2550, 2555 (Mid-Hi axle), 2755 (Mid-Hi axle), 820, 830, 840. (Item #: 102233, Ref: R47076) $58.00

Hub, Front Wheel, 6 bolt - Fits 1020, 1520, 1640, 1840, 1950N, 2020, 2030, 2040, 2040S, 2150, 2155, 2250, 2251N, 2350, 2355N, 2440, 2450, 2510, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 300B, 300D, 301A, 302, 302A, 3040, 310 (SN# 237997 and below), 3130 (SN# 186270 and above), 3140, 3150 (STD Duty), 3230, 3350 (Std Duty), 4000 (SN# 201000 and above), 401B, 401C, 4020 (SN# 201000 and above), 4030, 4040, 4230, 4240, 4430, 6403, 7405, 300, 301, 310, 380, 400, 401, 480, 480A, and 480B. Replaces the part number R49839. Uses wheel bolt part number WB916. Uses a press in cap part# R50992. (Item #: 102236, Ref: R49839) $62.00

Joint Assembly, MFWD - Used on ZF APL325 Mechanical Four Wheel Drive front ends, this part replaces OEM part numbers 1968450C1, 81430C1, 83961165, AL63606, AL38018, AL64250, ZP7029910201. This axle was used on John Deere models: 1640 axle serial number 048739 and up, 2040 axle serial number 048739 and up, 2040S axle serial number 048739 and up, 2350 axle serial number 048739 and up, 2355 serial number prior to 629298, 2550 axle serial number 048739 and up, 2555 serial number prior to 629299, 2650 serial number prior to 629299. (Item #: 156193, Ref: AL63606) $596.00

No
Picture
Packing - Washer, R39304 - For John Deere tractor models 830, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640 (s/n 430000-later), 1830, 2020, 2030, 2040 (s/n 430000-later), 2040 (s/n 350000-later), 2040S (s/n 430000-later), 2120, 2130, 2140 (s/n 430000-later), 2150, 2155, 2240 (s/n 349999-earlier), 2255, 2350, 2355, 2355N, 2440 (s/n 340999-earlier), 2550, 2555, 2630, 2750, 2755, 2840, 2855N, 2940, 2950, 2955 (s/n 765516-earlier), 3030, 3040 (s/n 430000-later), 3055, 3120, 3130, 3140 (s/n 430000-later), 3150, 3155, 3255, 3640 (s/n 341000-later), 4030, 4040, 4050, 4230, 4240, 4250, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8630, 8640, 8850, Compatible with John Deere Construction and industrial models 415B, 515B, Replaces John Deere OEM number R39304, (Item #: 117267) $3.40

Pivot Pin Seal, MFWD - For ZF APL325 or APL350 Mechanical Four Wheel Drive front axles, this o-ring has a 1.346 inch inside diameter and is 0.118 inches thick. Replaces OEM numbers 81419C1, 83927817, E1NN3125AA, L53819. These axles can be found on John Deere models: 1550, 1640, 1750, 1850, 2040, 2040S, 2155, 2350, 2355, 2355N, 2550, 2555, 2650, 2650N, 2855N (Item #: 124690, Ref: L53819) $2.60

Pivot Pin, Rear - 4.22" long, 1.49" O.D.. For tractor models 1640, 1840, 2040, 2040S, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2650N, 2750, 2755, 2850, 2855N. (Item #: 172464, Ref: L57725) $48.60

Planetary Carrier Housing - Used on ZF APL-325 Axles. Used on John Deere 1640 Serial number 430000 and up, 2040 serial number 430000 and up, (1550, 1750, 1850, 1850N, 1950, 1950N, all serial number 750789 and up), 2250, 2350, 2450, 2550, 2650, 2650N, (2155, 2355N, Axle serial number 100217 and up), 2355, 2555, 2855N. This part replaces 81454C1, 135700420748, 83927791, E1NN1N045AA, L40041 (Item #: 127236, Ref: VPR6067) $1389.01

Planetary Drive Shaft - Right Hand, Used - For John Deere tractor models 1640 (s/n 430000-later), 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2355N, 2550, 2555, 2750, 2755, 2855N, Replaces John Deere OEM nos L36201, Right Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430030) $100.01

Planetary Drive Shaft, Used - For John Deere tractor models 1640 (s/n 430000-later), 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2355N, 2550, 2555, 2750, 2755, 2855N, Replaces John Deere OEM nos L36202, Teeth: 15, Left Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430028) $160.01

Planetary Gear - Used on John Deere 1640 Serial number 430000 and up, 2040 serial number 430000 and up, (1550, 1750, 1850, 1850N, 1950, 1950N, all serial number 750789 and up), 2250, 2350, 2450, 2550, 2650, 2650N, (2155, 2355N, Axle serial number 100217 and up), 2355, 2555, 2855N. Three are used per housing. Sold individually. This part replaces 81455C1, E1NN4044AB, L40028 (Item #: 124631, Ref: VPJ7852) $107.00

Power Steering Cylinder - This Steering Cylinder measures 16.75 inches center-to-center, 18.75 inches overall length. Fits models 1641, 2140, 2141, 2350, 2355, 2541, 2550, 2555, 2750, 2755, 2940, 2941, 2950, 3140, 3141, 6110, 6120, 6200, 6210, 6220, 6230, 6300, 6310, 6320, 6330, 6400, 6420, 6430, 6500, 6510, 6520 (all 2WD with single acting cylinders, low axle). Verify OEM part number to ensure this is correct for your tractor. Replaces AL34542, AL36565, AL61553, RE17356, AL112919. (Item #: 108124, Ref: AL112919) $245.00

Power Steering Hand Pump - For John Deere tractor models 2350, 2355, 2550, 2555, 2750, 2755, 2950, 2955, 3040, 3140, Replaces John Deere OEM number AT61108, AT116906, AT176906, AT168641, Replaces manufacturer number 212-1089-002, 2WD Tractors, May Require Adaptor Block, Has SAE Threads., (Item #: 150766) $435.00

Rear Cast Wheel Pinion Gear, Used - For John Deere tractor models 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640 (s/n 430000-later), 1830, 2010, 2020, 2030, 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2130, 2140 (s/n 430000-later), 2141, 2240, 2350, 2440, 2510, 2520, 2541, 2550, 2630, 2640, 2750, 2755, 2840, 2940, 2941, 2950, 3020, 3030, 3040 (s/n 430000-later), 3120, 3130, 3140 (s/n 430000-later), 3141, 3150, 3641, 4000 (s/n 201000-later), 4010, 4020, 4030, 4040, 4050, 4055, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 7020, 7200, 7400, 7520, Replaces John Deere OEM nos B3014R, Teeth: 2 (inside) 14 (outside), Inside Diameter: .85", Outside Diameter: 2", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434488) $82.01

No
Picture
Seal - For John Deere tractor models 2350, 2355, 2550, 2555, 2750, 2755, 2940, 2950, 2955, 3040, 3055, 3140, 3150, 3155, 3255, Compatible with John Deere Harvester (s) 5720, 5730, 5820, 5830, 7445, 7450, 7455, 9930, 9935, 9960, 9965, 9970, 9976, Replaces John Deere OEM number L58008, Hydrostatic Steering Unit Seal, (Item #: 165394) $108.00

No
Picture
Spider U-Joint Assembly - For John Deere tractor models 1550 (s/n 750789-later), 1550 (s/n 720000-750788), 1640 (s/n 038265-048738), 1750 (s/n 720000-750788), 1850 (s/n 720000-later), 1850N, 1950 (s/n 720000-later), 1950N, 2040 (s/n 038265-048738, 450000-later), 2040S (s/n 038265-048738, 450000-later), 2250, 2350 (s/n 038265-048738), 2355, 2450, 2550 (s/n 038265-048738), 2555, 2650, 2650N, 2755, 2850, Replaces John Deere OEM number AL64255, AL65195, AL64126, AL71316, (Item #: 176288) $91.00

Spindle - Right or left hand. Vertical length is 9.250 inches. For tractor models 2150, 2155, 2350, (2355 low version), 2550, (2555 low version), 2750, 2755, 6110L, 6120L, 6200, 6200L, 6210L, 6220L, 6300, 6300L, 6310L, 6310S, 6320L, 6400, 6400L, 6410L, 6410S, 6420L, 6500L, 6510L, 6510S, 6520L. The wheel bearing kit used on this spindle is kit part number WBKJD7. (Item #: 104776, Ref: TP-AL38381) $140.00

Spindle - This is used as right or left hand spindle. Vertical length is 14.98 inches, 1.750 inches shaft Diameter. Fits row crop tractors with adjustable axles. For tractor models 1640, 2040, 2040S, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 3040, 3140. The wheel bearing kit used on this spindle is kit part number WBKJD7. (Item #: 102220, Ref: TP-AR74606) $197.00

$John Deere 2550 Spindle - Right Hand\Left Hand$
Spindle - Right Hand/Left Hand - For John Deere tractor models 1040, 1130, 1140, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2140, 2250 (with 44.5mm king pin), 2350, 2355, 2450, 2550, 2555, 2650, 2755 (Hi-Version), 2850, Replaces John Deere OEM number AL28222, Dimension A: 14.875", Dimension B: 1.500", Dimension C: 1.795", Dimension D: 1.312", Left or Right Side, (Item #: 102217) $158.00

Spindle Bushing - Used with AR103472, AR103473, AR58606 and other 1.375 inch axle shaft spindles. Replaces T21539 (Item #: 113923, Ref: T21539) $10.80

Spindle Dust Seal - This Spindle Dust Seal Measures: 44.6mm (1.76 inches) Inside Diameter, 59.78mm (2.35 inches) Outside Diameter. Note, this seal can be felt as shown, or cork depending on availability. Used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820 (3 Cyl.), 830 (3 Cyl.), 940. Replaces M2282T (Item #: 115287, Ref: M2282T) $4.50

$John Deere 2550 Spindle LH\RH$
Spindle LH/RH - Measures A = 11.875", B = 1.375", C = 1.375", D =.842" REPLACES OEM numbers : AR49589, AT23636. Fits:1020, 1030, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1840, 1850, 1950, 2020, 2040, 2120, 2150, 2155 (mid-hi axle), 2250 (swept back), 2350 (low profile), 2355 (mid-hi axle), 2450, 2550, 2555 (mid-hi axle), 2755 (mid-hi axle), 820, 830, 840, 920, 930, 940, 1035. Wheel Bearing kit available separately as p/n WBKJD3. (Item #: 102216, Ref: AR58606) $139.44

Spindle Thrust Bearing - This Spindle Thrust Bearing Measures: 35.3mm (1.39 inches) Inside Diameter, 58.5mm (2.30 inches) Outside Diameter, 16mm (0.63 inches) Wide. Used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820 (3 Cyl.), 830 (3 Cyl.), 940. Replaces JD8407, JD2407, AH548R, JD8407HQQ, QX38497, 04271AB, VT2729, A30054, 441242C1 (Item #: 104207, Ref: JD8407) $10.80

Spindle Thrust Washer - This Spindle Thrust Washer is used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820 (3 Cyl.), 830 (3 Cyl.), 940. Replaces M2283T (Item #: 115286, Ref: M2283T) $2.50

Spindle, Used - For John Deere tractor models 1750, 1850, 1950, 2150, 2155, 2350, 2355, 2550, 2555, 2750, 2755, 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6220L, 6300, 6300L, 6310, 6320, 6320L, 6400, 6400L, 6410, 6410L, 6410S, 6420, 6420L, 6500L, 6510, 6510L, 6510S, 6520, 6520L, Compatible with John Deere Sprayer(s) 6500, Replaces John Deere OEM number AL38381, Upright Shaft Length: 9.250", Upright Shaft Diameter: 1.500, Inner Bearing Diameter: 1.795", Outer Bearing Diameter: 1.312", Left Hand or Right Hand, For a new version of this item use Item #: 104776, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430522) $59.01

Steering Arm - For tractor models (2350, 2355, 2550, 2555, 2755), 2940 with dual cylinders. Steering Arm - Left (Item #: 104940, Ref: L36442) $174.00

Steering Arm - For tractor models 2350, 2355, 2550, 2555, 2755, 2940. Steering Arm - Right. (Item #: 104941, Ref: L34366) $172.00

Steering Arm - Left Hand - For John Deere tractor models 1640, 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2755, 2850, 4555, Replaces John Deere OEM number L28315, LH Steering Arm, (Item #: 104932) $156.00

Steering Arm - Left Hand - For John Deere tractor models 840, 940, 1020 (All w/ Straight Fron Axle), 1120, 1130, 1140, 1350, 1520 (All w/ Straight Fron Axle), 1530 (All w/ Straight Fron Axle), 1550, 1630, 1640, 1750, 1850, 1950, 2020 (All w/ Straight Fron Axle), 2030 (All w/ Straight Fron Axle), 2120, 2150, 2155 (All w/ Straight Fron Axle), 2240 (All w/ Straight Fron Axle), 2250, 2350, 2355 (All Middle Version w/ Straight Fron Axle), 2440, 2550, 2555 (All Middle Version w/ Straight Fron Axle), 2630 (All w/ Straight Fron Axle), 2640 (All w/ Straight Fron Axle), 2755 (All Middle Version w/ Straight Fron Axle), Compatible with John Deere Construction and industrial models 301, 401, Replaces John Deere OEM number T21619, Fits Left Hand Side, For Right Hand Side use Item #: 104957, (Item #: 104956) $157.00

Steering Arm - Right Hand - For John Deere tractor models 1640, 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2755, 2850, 4555, Replaces John Deere OEM number L28314, RH Steering Arm, (Item #: 104931) $121.00

Steering Arm - Right Hand - For John Deere tractor models 840, 940, 1020 (All w/ Straight Fron Axle), 1120, 1130, 1140, 1350, 1520 (All w/ Straight Fron Axle), 1530 (All w/ Straight Fron Axle), 1550, 1630, 1640, 1750, 1850, 1950, 2020 (All w/ Straight Fron Axle), 2030 (All w/ Straight Fron Axle), 2120, 2150, 2155 (All w/ Straight Fron Axle), 2240 (All w/ Straight Fron Axle), 2250, 2350, 2355 (All Middle Version w/ Straight Fron Axle), 2440, 2550, 2555 (All Middle Version w/ Straight Fron Axle), 2630 (All w/ Straight Fron Axle), 2640 (All w/ Straight Fron Axle), 2755 (All Middle Version w/ Straight Fron Axle), Compatible with John Deere Construction and industrial models 301, 401, Replaces John Deere OEM number T21618, Fits Right Hand Side, For Left Hand Side use Item #: 104956, (Item #: 104957) $132.00

Steering Arm Bushing - Measuring 1.440 inches outside diameter and 1.259 inches inside diameter, this steering arm bushing is used on John Deere Tractor models: 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2240, 2255, 2350, 2440, 2550, 2640, 2750, 3030, 3350, 830, 840, 940 and John Deere Industrial models: 300, 300B, 301, 301A, 302, 302A, 310, 310A, 310B, 380, 400, 401, 401B, 401C, 401D, 410, 480, 480A, 480B, 480C, 500, 500C. Replaces L62839, L58547, T23118 (Item #: 115654, Ref: T23118) $10.00

Steering Column Sleeve, Used - For John Deere tractor models 1640 (s/n 430000-later), 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2350, 2355, 2550, 2555, 2750, 2755, 2855N, 2940, 2950, 2955, 3040 (s/n 430000-later), 3055, 3140 (s/n 430000-later), 3150, 3155, 3255, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Combine(s) 1166, 1169, 1174, 1174H4, 1177, 1177H4, 1188, 1188H4, 4435, Compatible with John Deere Harvester(s) 7440, 7445, 7450, 7455, 9920, 9930, 9935, 9940, 9950, 9960, 9965, 9970, 9976, Compatible with John Deere Construction and industrial models 762, 762A, 762B, 862, 862B, Compatible with John Deere Sprayer(s) 6500, 6600, 6700, Replaces John Deere OEM nos R51153, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434514) $23.76

No
Picture
Steering Coupler, Used - For John Deere tractor models 1640 (s/n 430000-later), 2040 (s/n 430000-later), 2040S (s/n 430000-later), 2140 (s/n 430000-later), 2350, 2355, 2550, 2555, 2750, 2755, 2940, 2950, 2955 (s/n 767516-earlier), 3040 (s/n 430000-later), 3055, 3140 (s/n 430000-later), 3150, 3155, 3255, 4030, 4040, 4040S, 4050, 4055, 4230, 4240, 4240S, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955, 8430 (1974-1981), 8440, 8450, 8560, 8570, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, Compatible with John Deere Combine(s) 1166, 1169, 1174, 1177, 1188, 4435, Compatible with John Deere Harvester(s) 7440, 9920, 9940, 9950, 9970, Compatible with John Deere Scraper(s) 762, 762A, 762B, 862, 862B, Replaces John Deere OEM nos R50869, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 446969) $29.01

Steering Hand Pump - For John Deere tractor models 2350, 2355, 2550, 2555, 2755, 2855, 2855N, 3055 (with FWD), 3140 (s/n 430000-later), 3255 (with FWD), Replaces John Deere OEM number AL69803, Replaces manufacturer number 262-1168-001, 262-1168-002, 262-1002-074, 262-1002-073, 262-1001-073, 262-1001-074, 262-1167-002, Port Size: 18 x 1.5mm, (Item #: 112159) $780.00

Steering Hand Pump - For John Deere tractor models 2350, 2355, 2550, 2555, 2750, 2755, 2855N, 2950, 2955, 3140, Replaces John Deere OEM number AT61110, AL59903, AL59904, AL59972, AL59973, AL59902, Replaces manufacturer number 212-1004-002, 262-1004-001, Positively Identify Before Ordering, For a Remanufactured version of this sku use Item #: 207254, (Item #: 155483) $554.00

Steering Hand Pump - For John Deere tractor models 2350, 2355, 2550, 2555, 2750, 2755, 2940, 2950, 2955 (s/n 767516-earlier), 3140, Replaces John Deere OEM number AL41633, AL69802, Replaces manufacturer number 262-1001-073, 262-1001-074, 262-1167-002, Port Size 18 X 1.5MM, For a Remanufactured version of this sku use Item #: 207133, (Item #: 160073) $1189.01

Steering Release Rod, Used - For John Deere tractor models 1640 (with SG2 s/n 43000-later), 2040 (with SG2 s/n 43000-late), 2040S (with SG2 s/n 43000-later), 2140 (with SG2 s/n 43000-late), 2350 (with SGB), 2355 (with SGB), 2550 (with SGB), 2555 (with SGB), 2650 (with SGB), 2650N (with SGB), 2750 (with SGB), 2755 (with SGB), 2850, 2940, 2950 (with SGB), 2955 (with SGB), 3040 (with SGB s/n 43000-later), 3055, 3140 (with SGB s/n 43000-later), 3150, 3155, 3255, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560 (4630), 4630, 4640, 4650, 4755, 4760, 4840 (4850), 4850, 4955, 4960, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970, Compatible with John Deere Combine(s) 4435, Compatible with John Deere Harvester(s) 7440, 7445, 7450, 9920, 9930, 9935, 9940, 9960, 9965, 9970, 9976, Compatible with John Deere Sprayer(s) 6500, 6600, 6700, Replaces John Deere OEM nos AR54808, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499865) $15.51

No
Picture
Steering Valve Assembly - For John Deere tractor models 820, 830 (s/n 258366-later), 920, 930 (s/n 258366-later), 940, 1020, 1030, 1040, 1140, 1520, 1530, 1550, 1640, 1750, 1850, 2020, 2030, 2040 (s/n 266750-later), 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640 (all using closed center hydraulic system), Compatible with John Deere Construction and industrial models 300, 301, 302, 310 (s/n 163706-earlier), 400, 401 (all using closed center hydraulic system), Replaces John Deere OEM number AL31262, AL31515, AL70699, AT23175, RE10800, Only for use with closed center hydraulic system, Tall Housing - 15-1/2", Comes primered (color may vary). Prior to painting check fitment, For a Remanufactured version of this sku use Item #: 205195, (Item #: 109847) $740.00

Steering Valve Assembly, Remanufactured, AL31515 - For John Deere tractor models 820, 830 (s/n 258366-later), 920, 930 (s/n 258366-later), 940, 1020, 1030, 1040, 1140, 1520, 1530, 1550, 1640, 1750, 1850, 2020, 2030, 2040 (s/n 266750-later), 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640 (all using closed center hydraulic system), Compatible with John Deere Construction and industrial models 300, 301, 302, 310 (s/n 163706-earlier), 400, 401 (all using closed center hydraulic system), Replaces John Deere OEM number AL31515, AL31262, AL70699, AT23175, RE10800, Marked L34450, R58041, R77312, R77314, T25295, For a New version of this sku use Item #: 109847, (Item #: 205195) $660.01

Steering Valve Assembly, Used - For John Deere tractor models 820, 830 (s/n 258366-later), 920, 930 (s/n 258366-later), 940, 1020, 1030, 1040, 1140, 1520, 1530, 1550, 1640, 1750, 1850, 2020, 2030, 2040 (s/n 266750-later), 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640 (all using closed center hydraulic system), Compatible with John Deere Construction and industrial models 300, 301, 302, 310 (s/n 163706-earlier), 400, 401 (all using closed center hydraulic system), Replaces John Deere OEM number AL31262, RE10800, AL31515, AL70699, AT23175, For a new version of this item use Item #: 205195, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409847) $530.01

Steering Wheel Cap - This 2 legged deer, correct cap for many covered steering wheels on JD models from 1968-2000. Fits a 2 7/16 inch opening. Replaces AL118173, AL155227, R47998 (Item #: 101453, Ref: AL155227) $52.00

Steering Wheel Nut - This steering wheel nut fits the following tractor models: 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 520, 530, 6030, 620, 630, 7020, 720, 730, 7520, 820, 830, 8430, 8440, 8450, 8630, 8640, 8650, and 8850. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 14H482, 14H798, and 14H904. (Item #: 157780, Ref: 353435X1) $1.00

Thrust Washer - For John Deere tractor models 301, 1640, 1840, 2040, 2040S, 2140, 2250, 2350, 2355 (HD Axles), 2450, 2550, 2555 (HD Axles), 2640 (With Straight Non-Adj. Axle s/n 341000-later), 2650, 2750, 2755 (HD Axles), 2840, 2850, 2940, 3040, 3130 (s/n 186270-later), 3140, 3150 (STD Duty), 3350 (STD Duty), Compatible with John Deere Construction and industrial models 300, 300B, 302A, 310 (s/n 237997-earlier), 400, 401, 480A, 480B, Replaces John Deere OEM number T31749, (Item #: 158880) $5.80

Thrust Washer - For John Deere tractor models 1640, 1840, 2040, 2040S, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2640 (s/n 341000-later), 2650, 2750, 2755, 2840, 2850, 2940, 2950, 3040, 3130 (s/n 186270-later), 3140, 3150, 3350, Compatible with John Deere Construction and industrial models 300, 300B, 302A, 310 (s/n 237997-earlier), 400, 401, 480A, 480B, Replaces John Deere OEM number T34548, (Item #: 163643) $1.60

Tie Rod - 3.880" long, 24mm dia. For tractor models 1640, 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2755, 2850, 2855N. Replaces AL37504. (Item #: 104795, Ref: AL82826) $20.00

Tie Rod - For John Deere tractor models 1550, 1640, 1641, 1750, 1840, 1850, 1950, 2040, 2040S, 2140, 2141, 2250, 2251, 2350, 2351, 2355, 2450, 2541, 2550, 2555, 2650, 2651, 2750, 2755, 2850, 2941, 2951, 6110L, 6120L, 6200, 6200L, 6210L, 6300, 6300L, 6310L, 6310S, 6400, 6400L, 6410L, 6420L, 6500, 6500L, 6510L, 6510S, 6520L, Replaces John Deere OEM number AL37204, Length: 18.750", Width: 1.250", (Item #: 160188) $54.00

Tie Rod Assembly - For John Deere tractor models 1550, 1640, 1750, 1840, 1850, 1950 (with APL315/325 Front Axle, Hydro Steering), 2040, 2040S (with APL325 Front Axle, s/n 430000 - later), 2140 (Mfg in Spain, s/n 133493 - later, with APL735 Front Axle, s/n 430000 - later), 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750 (with APL735 Front Axle), 2755 (with APL735 Front Axle, s/n 676090 - earlier), 2850 (Mfg in Spain), Replaces John Deere OEM number AL38097, (Item #: 104849) $134.00

Tie Rod End - Measures Overall Length 7" (177.8 mm); top M20 X 1.5 RH Thread; bottom M18 X 1.5 RH Thread. Used on 1550, 1640, 1750, 1850, 1950, 2040, 2040S, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2850. Replaces 6000103261, AL178240, AL39320 (Item #: 105181, Ref: AL39320) $52.00

Tie Rod Tube - 12.218" long, .812" I.D., 1.125"-12 O.D. thread. For tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1850, 1950, (2020 with swept back axle), 2030, 2120, 2150, 2155, 2240, 2250, 2350, 2355, 2550, 2555, 2630, 2640, 2755, JD301, JD401. (Item #: 128344, Ref: T29109) $25.50

Tie Rod Tube - For John Deere tractor models 1640, 1830, 1840, 2040, 2130, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2755, 2850, Replaces John Deere OEM number L32308, 13.940" Long, (Item #: 104831) $69.00

No
Picture
Tie Rod Tube - For John Deere tractor models 1550, 1640, 1641, 1750, 1840, 1850, 1950, 2040, 2040S, 2140, 2141, 2250, 2251, 2350, 2351, 2355, 2450, 2541, 2550, 2555, 2650, 2651, 2750, 2755, 2850, 2941, 2951, 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6400, 6400L, 6410, 6410L, 6410S, 6420, 6420L, 6500, 6500L, 6510, 6510L, 6510S, 6520, 6520L, Replaces John Deere OEM number L39324, 32.75" Long, Additional Handling and Oversize Fees Apply To This Item, (Item #: 104833) $173.00

Tie Rod Tube - For John Deere tractor models 2350, 2355, 2550, 2750, 2755, 2950 (All with Wide Axle/Hyd Steering), 2955 (All with 60" - 88" Tread), Replaces John Deere OEM number L64252, 50.380" Long, Additional Handling and Oversize Fees Apply To This Item, (Item #: 104835) $128.10

No
Picture
Valve, Steering - For John Deere tractor models 2350 (4WD less cab), 2355 (4WD less cab), 2550 (4WD less cab), 2555 (4WD less cab), Replaces John Deere OEM number AT79269, AT61099, AT74315, AL59898, AT101661, Replaces manufacturer number 212-1003-001, For a Remanufactured version of this sku use Item #: 207242, (Item #: 168208) $661.00

Wheel Half Shaft Seal, MFWD - Used on ZF APL325 Mechanical Four Wheel Drive front ends, this seal measures 1.388 inches inside diameter, 2.055 inches outside diameter and is 0.588 inches wide. Replaces OEM numbers 81411C2, 83956841, 83961163, AL63351, AL68702, ZP07050110133. Used on John Deere 2155, 2350, 2355, 2550, 2555, 2855 (Item #: 124717, Ref: AL63351) $21.80

Wheel Hub Trunnion Pin - Also known as a King Pin, this Wheel Hub Trunnion Pin is used on ZF APL325 Mechanical Four Wheel Drive front ends. This part replaces L40036, ZP4472351239, 81428C1, 83946561, E1NN3B626AA. Verify your axle before ordering. Some of the models listed used more than one 4 wheel drive front end. Used on John Deere 1550, 1640 serial number 430000 and up, 1750, 1850, 2040 serial number 430000 and up, 2040S serial number 430000 and up, 2155, 2350, 2355, 2355N serial number 430000 and up, 2550, 2555, 2650, 2855N (Item #: 124687, Ref: E1NN3B626AA) $77.00

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.20

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.70

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $15.10

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $9.10

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $8.70

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 2550 Parts] [All John Deere Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy