(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


International Harvester / Farmall H Parts

[ Show Pictures ]

[Categories]   [All Farmall Models]   [Print]  


Brakes
Brake Actuating Spring - Used with disc brakes. For tractor models H, HV, Super C, Super H, O4, OS4, W4, 200, 230, 240, Farmall 300, 330, 340, Farmall 350, 404, 460, 504, 544, 606, 2404, 2504, 2544, 2606, 203, 205, 315, 615. Replaces: 354627R1 (Part No: A30910)
$7.50

Brake Band - Lined Brake Band (1). Fits (H and HV both to serial number 391357), I4, O4, OS4, W4. Brake rod unpins from lining. It is 2 inches wide. Replaces: 58344DCX. (Part No: 58344DCX)
$45.95

Brake Disc, Bonded - This Bonded Brake disc has 5 5/8 inch outside diameter and 3 3/8 inch lining inside diameter. It has 10 splines with a 1.520 inch Minor, 1.840 inch Major inside diameter. For tractor models H serial number 391358 and up, Super H, Super W4; 300, 350. 4 used per tractor, sold individually. Replaces 1975457C2, 368183R91, 385195R91, 84468300, 1975457C3 . (Part No: 1975457C3)
$13.47

Brake Disc, Riveted - This Riveted Brake Disc has 5 5/8 inch outside diameter and 3 3/8 inch lining inside diameter. It has 10 splines with a 1.520 inch Minor, 1.840 inch Major inside diameter. For tractor models: H serial number 391358 and up, Super H, Super W4; 300, 350. 4 used per tractor, sold individually. Replaces 1975457C2, 368183R91, 385195R91, 84468300. (Part No: 1975457C2)
$15.00

Brake Pedal Return Spring - Used with band brakes. For tractor models (2544, 544 clutch pedal return), H, HV, M, MD, MDV, MV. 8-1/8 inch overall length. (Part No: 48599DA)
$7.50

Brake Pedal Shaft - For tractor models (H, HV serial number up to 391357 with brake band). (Part No: 50170DA)
$51.89

Clutch
Bearing - Pilot - New Pilot Bearing. 25mm (.9843 inch) inside diameter, 52mm (2.0472 inch) outside diameter with seals on both sides. For tractors: 400, 450, 500, 560, 600, 660, H, HV, M, M500, MD, MDV, MV, Super H, Super M, Super MD, Super MTA, Super W4, Super W6, W4, W6, WD6. (Part No: ST544)
$4.73

Clutch Kit - For tractor models H, HV to serial number 391357. This is a Rockford Style Clutch. Picture is incorrect.... this comes with a woven disc, not a 4 button disc. Kit contains remanfactured pressured plate (10 inch and 6 springs), remanufactured disc (10 inch with 10 spline and 1-1/4 inch hub), new release bearing and new pilot bearing. Refundable $25 core charge will be added to your order. (Part No: 52900K)
$309.52

Clutch Pedal Return Spring - This Clutch Pedal Return Spring is 6 inches total length. It fits H, HV, M, MD, O6, ODS6, OS4, OS6, Super H, Super HV, (Super M, Super MD both up to serial number 60000), Super MTA, W4, W6, W6TA, WD6; Replaces: 49444DA. (Part No: 49444DA)
$14.95

Clutch Release Bearing, Greaseable - For tractor models A, Super A, B, C, Super C, H, Super H, 100, 130, 140, 200, 230, 240, 404, 2404. This bearing is 3.5625 inch outside diameter, 2.0625 inch inside diameter. (Part No: 361292R91)
$35.52

Pressure Plate - 10.5 inch Rockford Style. Fits H serial number 391358>, HV serial number 391358>, Super H serial number 391358>. (Part No: 358555R92)
$227.82

Pressure Plate - 10 inch Rockford Style. Fits Models: H, HV, Super H, Super W4, W4. (Part No: 52900D)
$190.88

Pressure Plate, 9 Inch - Rockford Style Clutch Pressure Plate. Fits Models: H, HV, Super H, Super W4, W4. (Part No: 70228926)
$59.20

Transmission Disc - 10.5 inch Rockford Style. Fits Models: H serial number 391358>, HV serial number 391358>, Super H serial number 391358>. (Part No: 358556R92)
$60.24

Transmission Disc - 10 inch Rockford Style. 10 spline 1.25 inch. Fits Models: H, HV, Super H, Super W4, W4. (Part No: 64772DA)
$76.63

Cooling System
Fan - 6 blade fan. For tractor models H, HV. (Part No: A184904)
$118.13

Fan Belt - Fan belt fits engines: C152, C164, C169, C175. For tractor models H, 4, Super H, Super W4, 300, 350. Belt is 5/8 inches wide and 38-3/8 inches long. (Part No: 48032DA)
$13.14

Header, Water Cover - Water jacket cover for Models: 300, 350, H, Super H, Super HV. Order 45266DA Gasket separately. (Part No: 48461DA)
$26.87

Radiator - For tractor models H and Super H, HV, Super HV, O4, OS4, W4, Super W4. Replaces OEM number 352628R92. (Part No: 352628R92)
$367.41

Radiator Cap With Lever - Pressure cap with lever. For C, H, M, MD, O6, ODS6, Super C, Super H, Super M, Super MD, Super W4, Super W6, Super W9, Super WD6, Super WD9, Super A, W4, W6, W9, WD9 (Part No: 67448DDWL)
$7.28

Radiator Hold Down Spring - Also used for fuel tank hold down spring. Total 5 used per tractor. For tractor models H, HV, O4, O6, SUPER H, ( As radiator hold down spring only - 2 used: SUPER M, SUPER MTA, W4, W6, WD6, 400, 424, 450, 2424. (Part No: 48826D)
$8.38

Radiator Hose Kit - Radiator hose kit for tractors: H, 4, Super W4l 300 and 350 (not Farmall). Hoses-(1) 1-1/4 inch inside diameter x 2-1/4 inch length, (1)1-3/4 inch inside diameter x 3-1/2 inch length, (2) 1-1/2 inch inside diameter x 2 inches. (Part No: RHKH300)
$9.64

Radiator Pipe, Lower - Lower water pipe. For tractor models H, HV, I4, O4, OS4, Super H, Super W4, W4. Replaces 48828D, IHS684. (Part No: 353852R1)
$36.32

Temperature Gauge - For tractor models B, C, Super A, Super C, H, M, 100, 130, 140, 200, 230, 240, 300, 340, 350, 400 except DSL. This Gauge has a 2 foot lead with a white face and IH logo. (Part No: 393481RH)
$29.69

Thermostat - This 160 degree Long Neck Thermostat. Fits the following tractor models: H, HV, M, MD, MDV, MTA, MV, O4, O6, Super H, Super HV, Super M, Super MD, Super W6, W4, W6, W9, 300, 350 Gas, 400, 450, 560 Diesel, 656 Diesel, 660 Diesel, and 706 Diesel. It does not come with a gasket. (Part No: R1852)
$39.45

Water Block Drain Plug, Winged - Plug 3/8 inch pipe thread, has "IH" and part number stamped in it, cast iron with zinc plating. For tractor models A, AV, Super A, Super AV, Super A1, Super AV1, B, BN, C, H, HV, Super H, Super HV, I4, I6, ID6, I9, ID9, M, MD, MV, MDV, Super M, Super MD, Super MV, Super MDV, MTA, 04, 0S4, 06, 0S6, ODS6, T6, T340, TD6, T9, TD9, W400, W450, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650 (Gas/Diesel), serviceable for Cub, Cub LoBoy. (Part No: 45314DC)
$10.54

Water Pump - For H, Super H. Water Pump. (Part No: 54148DA)
$202.64

Water Pump Bearing - Ball bearing for water pumps used on tractors: H, Super H, 4, Super W4, 300, 350. 2 used per pump, replaces ST225. For 300, 350, 4, H, Super H, Super W4 (Part No: ST225B)
$6.75

Water Pump Pulley Flange - For model H. This flange measures 5 1/2 inches in diameter. This will NOT fit early tractors with a 5 inch outside diameter pulley part number 6598D. (Part No: 6598DX)
$25.05

Water Pump Seal - This new seal fits the Case-IH Tractor H, HV, 300 Farmall, and 350 Farmall. Replaces Part Number 473421. (Part No: 51492DA)
$18.59

Water Pump, Impeller - For tractor models 300, 350, H, Super H. This is impeller Only, DOES NOT include shaft or thrust washer. (Part No: 9165DX)
$23.77

Decals and Emblems
Decal Set - For H 1939-1944. This is a set of 13 self adhesive decals. These are printed on Mylar, not die cut. (Part No: IHCMDH)
$28.88

Decal Set - For H "McCormick" 1945-52. Complete Decal Set. (Part No: IHCH)
$25.15

Hood Emblem - Hood Emblem For H, HV, M, MV, MD, MDV. Bright Metal "Farmall" logo. (Part No: 49404D)
$14.25

Toolbox Decal - For tractor models H, M, MD, Super H, Super M, Super MD, Super MTA. (Part No: R0678)
$8.15

Drive Train
Constant Mesh Gear - For tractor models H, HV, Super H, Super HV, W4. 55 Teeth. Replaces: 357459R2, 48418D, 48418DA (Part No: 357459R2)
$115.92

Fourth & Fifth Gear - Fourth & Fifth Sliding Gear For H 18 & 35 teeth Replaces: 357946R1, 51561D, 56420D, 56420DA (Part No: 56420DA)
$102.47

Gear Shift Knob - For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, W4, W6, WD6, Super W6, W9, WD9, Super WD9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 354, 400, 404, 450, 424, 460, 504, 560, 600, 606, 660, and on the hydraulic lever control on the 454 and 574. Gear shift lever knob. Replaces 3121549R1, IHS266. (Part No: 53717DA)
$5.25

Seal, Rear Axle - One 2-1/2 inch diameter seal. For tractor models 300, 330, 340, 350, 460, H, HV, Super H, Super HV. Inside diameter 2.500 inches, outside diameter 3.548 inches, width 0.438 inches. Replaces 358770R91, 360251R91, 377786R1, 377786R92, 43722D. (Part No: 377786R1)
$11.10

Third & Fourth Gear - Third & Fourth Driving Gear For H 31 & 35 teeth. (TIS, 0127R) (Part No: 56417DA)
$141.18

Transmission Drive Shaft - For tractor models H and HV to serial number 391357, 04, 0S4, W4. 18 and 35 teeth. (Part No: 52945DE)
$168.84

Electrical System
12 Volt Conversion Kit - Includes alternator, 12 volt resistor, wiring harness, brackets and instructions. For models H and M. Will not work if you have a magneto. THIS KIT WILL FIT UNDER ORIGINAL HOOD WITHOUT MODIFICATION TO HOOD. (Part No: IHCALTH)
$182.81

Alternator - With regulator. This is the alternator used in our 12 volt conversion kit for the model H. 40 Amp. It will fit under hood without hood modifications. (Part No: S.70910)
$79.97

Alternator Bracket Kit - For tractor models H, Super H. (Part No: ALTBRK-H)
$52.37

Battery Cable - From battery to starter, 48 inches long. For tractor models H, W4. (Part No: 26A148)
$23.04

Coil, Original, 12 Volt - OEM style coil. For tractor models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. (Part No: 353875R91)
$56.86

Coil, Original, 6 Volt - OEM style coil. Measures overall length of 5 3/8 inches, Diameter at widest point of center ridge is 2 1/4 inches. This distributor coil has a 1.4 ohm rating between the two primary winding terminals. For tractor models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. (Part No: 353874R91)
$54.40

Condenser - Services IH distributors 1951 to 1962 also services J4 magnetos. For tractor models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 300, 330, 340, 350, 400, 404, 450, 460, 504, 560, 606, 660, 706, 806, A, B, C, Cub, Cub 154, Cub 185 Lo-Boy, Cub Lo-Boy, H, HV, M, MD, Super A, Super C, Super H, Super M, Super MTA. (Part No: 353903R1)
$3.90

Condenser, Magneto - Condenser for IH Models using H4 F4, J4 Magneto (replaces 373892R91). For tractor models 100, 130, 200, 300, 350, W4, W6, A, B, BN, C, H, M. Note, this condenser will ship as one of two functionally identical versions shown, a long piece OR a short with an extension, depending on stock available. Replaces 21409DA, 21409DB, 354136R92, 373892R91, 47546D, 71455C91 (Part No: 71455C1)
$8.52

Distributor Cap - 4 Cylinder Clip Type Cap for Delco Distributors. Replaces 811735 Delco and 1750411M1. For tractor models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414. (Part No: 1750411M91)
$6.60

Distributor Cap - 2-3/16 inches high, fits 4 cylinder. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, A, AV, B, BN, C, Cub, 154 Lo-Boy, Cub 185 Lo-Boy, H, M, MD, Super A, Super M, Super C, Super H, Super HV, M, MV, MD, Super M. (All with IH Distributor, not for Delco Distributor). Will also fit J4 magneto. (Part No: 351693R92)
$5.24

Distributor Drive Housing - This is a USED distributor drive housing with an opening for tachometer drive. It is used to change from a magneto to a distributor or to add a tachometer drive to your tractor. The tachometer drive parts (tachometer drive assembly part number 369695R1, tachometer cable connector housing, part number 369692R1 and 363817R1, connection housing plate) or tach. Drive blockoff plate are sold separately. NOTE: Will also work on tractors without tach drive by ordering number 363764R1 block off plate. Use with 107304C91 distributor when replacing a magneto. fits tractor models A, A1, AV, AV-1, B, BN, C, Cub, Cub Lo-Boy, H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W9, W4, W6, W6TA, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 3444, 350, 3514, 404, 424, 444, 504, 400, 600, 650 450. Replaces: 363749R91, 363763R11. (Part No: 363749R91)
$58.65

Distributor Drive Shaft - Shaft for the Distributor Drive. For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MD, 06, OS6, W6, WD6, W9, WD9, WR9, WDR9, WR9S, 200, 330, 340, 350, 400, W400, 404, 450, W450, 504. Distributor Shaft, for battery ignition with original IH distributor. (Part No: 353934R11)
$14.96

Distributor Dust Cover - Fits early Delco Distributor with Clip Held Cap. For tractor models (A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super HV, M, MV, Super MV, MTA. All with Delco Vertical Conversion Distributor 1111411). (Part No: 1900119)
$6.75

Distributor Dust Cover - Used with horizontal IHC distributor 353898R11 or J4 magneto on Models: A, AV, Super A, Super AV1, B, BN, C, Super C, Cub, Cub Lo-Boy, H, HV, Super H, Super HV, M, MV, MD, MDV, Super M, Super MD, Super MTA, W4, W6, W9, WR9, WR9S, WDR9, O4, O6, OS6, ODS6, I4, I6, ID6, I9, ID9, T6, TD6, TD9, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404. Replaces 384831R91. (Part No: 353900R11)
$12.00

Distributor Hold Down Clamp - For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Part No: 341139R1)
$6.95

Distributor Shaft Bushing and Shim Kit - Delco Distributor Shaft Bushing and Shim Kit. Fits A, A-I, A1, AV, AV-1, B, BN, C, H, HV, I4, I6, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, T6, U2, U2A, U4, U6, W4, W6 all with Delco vertical conversion distributor 1111411. Replaces: washer: 811913, shim washer: 810074, 810078, bushing: 1909003, 1952334 (Part No: ABC3007)
$22.50

Distributor Shaft Bushing and Shim Kit - International Distributor Shaft Bushing and Shim Kit. Fits tractor models A, A1, AV, AV1, B, BN, C, Cub, Cub Lo-Boy, H, HV, M, MTA, MTAV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 300, 330, 340, 3444, 350, 3514, 400, 404, 424, 444, 450, 504, 600, 650. Replaces: 252739R1, 352298R1, 353899R1, 353921R1, 373577R91, 86637641. This is a 5-piece kit. The length is 2.006 inches. (Part No: IHS3166)
$36.75

Distributor with Electronic Ignition - New and complete distributor FOR USE WITH 6 VOLT POSITIVE GROUND SYSTEMS ONLY. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. For: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. (Part No: 107304C91-6V)
$476.33

Distributor with Electronic Ignition - 12V - New and complete distributor FOR USE WITH 12 VOLT NEGATIVE GROUND SYSTEMS ONLY. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. For: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. Note: This distributor has a maximum advance of 21 degrees. Some applications require an advance up to 40 degrees. Verify with your service manual this distributor will work for your application. (Part No: 107304C91-12V)
$451.33

Distributor, New - Original IHC design. For tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, H, HV, I4, I6, I9, ID9, ID6, M, MD, MDV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD-TA, Super MDV, Super MTA, Super MV, Super W4, Super W6. (Part No: R6332)
$303.60

Distributor, New - New and complete distributor. For tractor models: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. (Part No: 107304C91)
$172.43

Distributor, Rebuilt - Complete remanufactured distributor for Farmall Cub, A, B, C, Super A, H, M, Super H, Super M, W6, W9, Super W6, 100, 130, 200, 240, 300, 400, 404, 450, 504 tractors with IH distributor with 353898R1 housing casting number. IH original part numbers 353890R91, 107304C91. A refundable $80.00 core charge will be added to your invoice. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Also NOTE: Note that if the core is not a complete and good core, part or all of the core charge will not be refunded. Typically, most cores need a shaft replacement and the cost of the shaft will be deducted from the core charge. This is usually $30 (Part No: 353898R1)
$151.80

Electronic Ignition Conversion Kit - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 6 volt POSITIVE ground system only. Use with distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650 (Part No: 1442P6)
$103.28

Electronic Ignition Conversion Kit - Electronic Module Replaces Points and Condenser. Use on tractors with 12 volt Positve Ground System only. (FOR NEGATIVE GROUND order part number 1442). Use with distributor number 357935R91 or 353898R1 on models: B, Cub, cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. (Part No: 1442P12)
$103.28

Electronic Ignition Conversion Kit - 12V Negative Ground - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 12 volt NEGATIVE ground system only. Use with IH distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. Verify distributor number before ordering. (Part No: 1442)
$93.61

Electronic Ignition Conversion Kit - 12v Negative Ground - For Tractor Models: A, AV, Super A & AV, B, BN, C Super C, H, HV, Super H & HV, M, MV, Super M & MTA, Super MD & MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with distributor part no. 1885368. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 12 volt NEGATIVE ground system only. Distributors with clip type cap. (Part No: 1142)
$93.61

Electronic Ignition Conversion Kit - 12v Positive Ground - For Tractor Models: A, AV, Super A & AV, B, BN, C Super C, H, HV, Super H & HV, M, MV, Super M & MTA, Super MD & MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with distributor part no. 1885368 or 1111411. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 12 volt POSITIVE ground system only. (Part No: 1142P12)
$103.28

Electronic Ignition Conversion Kit, 6v Positive Ground - For Tractor Models: A, AV, Super A & AV, B, BN, C Super C, H, HV, Super H & HV, M, MV, Super M & MTA, Super MD & MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with distributor part no. 1885368 with clip type cap. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 6 volt positive ground system only. (Part No: 1142P6)
$103.28

Fuse Housing - Reproduction of original Fuse Housing. Comes as pictured. For tractor models (Super A, Super AV, A1 all with magneto), C, Super C, 200, (H late with regulator under tank), Super H, HV, (M with regulator on post), (Super M 1953-1954), (Super M diesel), Super MTA, W4, OS4, O4, 100, 130, 400, 450. Replaces: 365515R91, 376852R91, 354232R91 (Part No: 376852R91)
$6.80

Generator, 6 Volt, Remanufactured - 6 volt, 25 amp. Delco fits Models: 200 1.75 inch SHAFT, 400 501-13673 GAS, A, A1 with BATTERY, AV with BATTERY, AV1 with BATTERY, B, BN, C, (Cub prior to serial number 221292 and Cub Lo-Boy prior to serial number 16397 - both with 1.75 inch long shaft) H, HV, M, MV, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MTA GAS, TD6 1955-56, TD9 1955-56, W4, W6, W6TA. Refundable $25.00 core charge will be added to your order after the order has been received and will not show on your receipt. (Part No: 356936R91)
$245.72

Ignition Switch - For the following Models using a magneto: Cub, Cub Lo-Boy, A, B, C, H, M, 100, 130, 140, 200, 230, 300, 350, 400. NOT like original. (Part No: 54207DB)
$7.88

Ignition Switch - 2 terminal. For the following Models using a distributor: Cub, Cub Lo-Boy, A, Super A, B, C, Super C, H, Super H, M, Super M, (140 6 volt), 200, 230. NOT like original. (Part No: 62801DC)
$6.75

Ignition Switch - This Ignition Switch is for Distributor Ignition Systems. This is a 2 terminal switch. For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230 (Part No: R2720)
$42.00

Ignition Switch - This Ignition Switch is for Magneto Ignition systems. This switch has only 1 terminal (Picture shows 2). For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub. (Part No: R2721)
$42.69

Ignition Tune Up Kit, Basic, Delco Clip Held Cap - Ignition kit For Delco ONLY distributor with CLIP held cap. (CAP NOT INCLUDED). Contains points, condenser, and rotor. For tractor models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414. (Part No: ATK1DCR)
$7.34

Magneto Coil Cover - For tractor models 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Part No: 47449DAY)
$26.93

Magneto Distributor Cap, H4 Magneto - For H-4 MAGNETO ignition on Models: 100, 200, 230, 240, 300, 330, 340, 350, 400, 450, A, B, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Part No: 47413DYC)
$15.75

Magneto Gasket Set - This magneto gasket set is for H4 Magnetos. It contains; Coil cover gasket 47453D, Distributor body gasket 47408D, Distributor gear cover gasket 49419D, Condenser hole cover gasket 359966R1 (48472DA), Magneto mounting gasket 55780DE (55780DD). Replaces: 359966R1, 47408D, 47453D, 48472DA, 49419D, 55780DD, 55780DE, E4226. For tractor models A, AV, B, BN, C, H, HV, I4, I6, I9, M, MTA, MV, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, T4, T5, T6, T9, U2, U2A, U4, U6, U9, W4, W6, W6TA, W9, WR9, WR9S, 100, 130, 200, 230, 300, 350, 400, 450, 600, 650, 400, 450 (Part No: MGK103)
$5.66

Magneto Point Set, F-4 - For tractor models F-4 type magneto only. Used on A, B, C, H, HV, M, MC, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA, 200, 230, 240, 300, 340, 350, 400, 450. (Part No: 353173R1)
$21.60

Magneto Points - Point Set Fits J4 and H4 Magneto(can work with F4 magneto with modify) (Part No: 353171R91)
$7.37

Magneto Rebuild Kit, H4 - Magneto Rebuild Kit For H4 Magneto used on: 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. Includes condenser, winding coil, points, rotor, cap, coil cover, gear and gasket. (Part No: H4-KIT)
$172.56

Magneto Tune-up Kit For H4 - Magneto Tune-up Kit For H4 Magneto used on: 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA, W4, W6. Includes condenser, points, rotor. (Part No: 21A10R)
$19.73

Magneto Winding for F4 or H4 - Coil Winding for F4 magneto and H4 magneto; molded, hi-output. 2 inch wide, 3/4 inch hole, 2-3/16 inch outside diameter. Can replace 47439DA. Magneto Winding for F4 and H4 Magnetos used on: F12, F14, F20, F30, H, MD, WD6, W9, WD9. (Note: This will NOT work for E4A magneto). (Part No: RW104)
$67.99

Magneto or Distributor Drive Shaft - Verify part number before ordering. For tractor models (300, 350, 400, 450 all not used with hydra touch system), (H, HV serial number 268224 and up), (M, MD, MDV, MV all serial number 148867 and up), Super H, Super HV, (Super M, Super MTA not used with hydra lift, attached with engine driven pump). (Part No: 352079R1)
$92.68

Magneto, Rebuilt - H-4 magneto with CLOCKWISE Rotation (as viewed from Drivers seat). For tractor models 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA, W4, W6. Right hand flange mount. Add $100.00 core charge to price - this charge is refundable if you send your core to us. (Part No: R1196807)
$414.00

Main Harness - Fits H (serial number 501 to 110652). (Part No: 52974D)
$59.22

Point Set - For J-4 Magneto and IH Distributor. Replaces 21A161, 407018R91, 353172R1, 353172R91 (Part No: 353172R1)
$3.89

Rotor - For IH Distributors on models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo Boy, Cub 154-Lo Boy, Cub 185-Lo Boy. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Part No: 353896R1)
$2.63

Spark Plug - For: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo Boy, Cub 154-Lo Boy, Cub 185-Lo Boy. Price shown is for EACH, shipped in lots of 4. Enter 4 in QUANTITY box. Replaces OEM number 360942R1. (Part No: AL386)
$2.24

Spark Plug Wire Set, Custom - IH or Delco Distributors. For tractor models Cub, A, Super A, B, BN, C, Super C, H, Super H, M, MTA, 300, 350, 400, 450. (Part No: S.67475)
$15.44

Starter Drive, HD - The Heavy Duty Starter Drive is recommended when purchasing a new 1107448 starter for 12 volt applications. It is 10 tooth, CCW, Barrel Folo rubber cushion drive design, 15.9mm inside diameter, 39.6mm gear diameter, 95-109mm length. It replaces 1868804, 77695H. (Part No: SDR5022)
$19.43

Starter Drive, Improved Style - This improved style starter drive is a positive ratchet style. For A, B, C, H, M, Super M, 100, 130, 140, 300, 330, 340, 350, 200, 240, 400, 450, Super A, Super C, W4, W6 all using the following starters 1107021, 2207412, 1107606, 1107427, 1107174, 1107067, 1107444, 1107093, 1107448, 1108097, 11074808, 1108098, 1107886, 1108093, 1108080, 1108038, 1108041, 1108012, 1108173, 1108016, 1108174, 1108185. Ten tooth drive, counter clockwise rotation, Barrel Folo rubber cushion drive design, 15.9mm inside diameter, 39.6mm gear diameter, 95-109mm. (Part No: 565549-New)
$19.43

Starter Switch Actuator - This new foot starter switch actuator lever and bracket fits; H, HV, M, MD, MDV, MV, Super H, Super HV, Super M, Super MD, Super MDV and Super MV where a foot activated starter switch mounts to the steering post. Replaces: Lever: 351922R11, Bracket: 351924R1 (Part No: IHS3263)
$39

Starter Switch, Manual - For H, M, Super M, MD, O4, OS4, W4, O6, OS6, ODS6, W6, WD6. Replaces delco 405C, IH64931H, 356913R1, 1996487. Base mount with 7/8 inch hole. (Part No: 9N11450A)
$4.50

Starter Switch, Manual - Starter Switch, manual, saddle mount. For A, B, C, Cub, Cub Lo-Boy, Super A and AV, Super C, H, HV, Super H and HV, Super M and MV, Super W6 and WD6, 100, 130, 140, 200, 230. Saddle Mount, 2 mounting holes, 190 inside diameter. With 1-3/8 inch centers. Replaces Delco 1918405, 1932131, and OEM IH number 593292C1. (Part No: 1925781)
$2.93

Starter, 6 Volt, 2 Bolt Mount - 2-bolt mounted starter for C163 gas engine on H (to serial number 19233), HV, for 248 gas on M (to serial number 28174), 152 Gas on OS4 (1940 to 1951), C248 Gas on O-6 (1940 to 1951), C264 gas on O-9 (1940 to 1951), C163 Gas on Super W-4 (1952 to 1954), C264 Gas on Super W-6/6TA (1946 to 1951), C335 Gas on Super W-9 (1946 to 1951), C163 Gas on I4 (1940 to 1951). Can be used on a 12 volt system and recommend installing heavy duty starter drive part number SDR5022. (Part No: 1107448)
$113.09

Starting Switch Lever - Starting Switch Lever - Lever, pull rod starting switch. For 100, 130, 140, 200, 230, C, Cub, Cub Lo-Boy, H, HV, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super WD6, Super A, WD6. Replaces: 1918322, 1919434 (Part No: 1918322)
$7.13

Terminal Clip - Light terminal plate with screws. For 200, 230, 300, 330, 350, 400, 450, 600, 650, A, B, C, H, HV, M, MD, O4, O6, ODS6, OS4, OS6, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super WD9, Super WDR9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S (Part No: 79407H)
$6.00

Tune Kit - This Tune Kit is for IH Distributors - NOT Delco. Complete Kit For: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo Boy, Cub 154 Lo-Boy, Cub 185 Lo-Boy. All with 4 cylinder gas engines and IH distributor from 1951 through 1962. Contains: Points, Plugs, Condenser, rotor. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Part No: IHTK1)
$21.15

Tune Kit - This Tune Kit is for Delco Distributors with clip help cap. 4 Cylinder kit includes Autolite spark plugs (Replaces Autolite AL386, AL388, AL3116 and Champion D10, D14, D16, RD16, D21, D23 plugs), points, condenser, and rotor. For tractor models with clip held Type Delco Distributor Caps. For tractor models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414. Verify correct spark plug replacement. (Part No: MFITK10)
$17.78

Tune Kit, Basic - This Basic Tune Kit is for 4 cylinder gas engines with battery ignition from 1951 thru 1962 with IH distributor (NOT for Prestolite), kit contains rotor, condenser, points, and proper point gap guage. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 444, 450, A, B, C, Cub 1962 and earlier, H, M, Super A, Super C, Super H, Super M, Super MTA, W4, W6. (Part No: ATK5BIR)
$15.30

Tune Kit, Comprehensive - This Comprehensive Tune Kit is for 4 cylinder gas tractor models A, AV, B, BN, C, Super A, Super AV, Super C, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, H, HV, 4, 444, Super H, Super HV, Super W4, 300, 350, M, 6, Super M, Super MTA, Super W6, W6-TA, 400, 450. All with IH Distributor, not for Delco Distributor. Kit contains spark plugs, points, condenser, rotor, gap gauge, (IHTK1) distributor cap (351693R92) and set of universal plug wires (CPN12259). NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Part No: IHTUNEKIT)
$36.87

Voltage Regulator - Regulator, 6 volt, positive ground, saddle mount, 4 terminal. Replaces Delco cut outs 1116766 and 1116809 when used with conversion kit VRK1815. For tractor models Cub, Cub Lo-Boy, A, Super A, B, C, H, M. Replaces: 1118265, 1118305, 1118790, 1118786. (Part No: VR1813)
$17.25

Voltage Regulator, 6 Volt, Positive Ground - REPLACES 121578C1, Delco 1118308, 1118780 & 1119575. Fits tractor models: 100, 130, 140, 330, 340, Cub, Cub Lo-Boy, Super A, Super C, H, M, MTA. (Part No: GDR6003)
$18.38

Wiring Harness - Wiring Harness, Headlights. For H, HV, M, MD, MDV, MTA, MV, Super M (Part No: 52973DA)
$43.50

Wiring Harness - For H with Regulator on generator. COMPLETE Wiring Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. (Part No: R3720)
$212.62

Wiring Harness - For H with Regulator Under Fuel Tank. COMPLETE Wiring Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. (Part No: R2604)
$212.62

Wiring Harness - 12 Volt - Used when tractor has been converted to 12 volts with our 12 volt conversion kit. For tractor models H, Super H, M, Super M (Part No: HM12VOLTWIRES)
$23.92

Wiring Harness, Main - For model H with regulator under tank, serial number 340954 and up. Restoration quality with cloth covered laquered wire and cotton braid. (Part No: 354257R91)
$53.68

Wiring Harness, Main - For tractor models H serial number 501 to 340953 (with regulator on generator), M serial number 501 to 187002. (Part No: 56281D)
$89.56

Wiring Harness, Rear Light - For model H, HV. Rear light switch wiring harness. Restoration Quality. (Part No: 358311R91)
$52.80

Wiring Harness, Regulator Cable - For tractor models H, HV, M, MV, Super M, Super MTA. (Part No: 354297R91)
$18.15

Engine Bearings
Cam Bearing Set - Camshaft bearing kit, 3 bearings. Induvidual bearings not available. For C152 CID 4 cylinder engine in tractors H & HV O4, OS4, W4. For 300, 350, H, HV, O4, OS4, Super H, Super HV, Super W4, W4. Replaces: 45020D, 45020DB, 45021D, 45021DA, 45022D, 45022DA, 53419DB, 53420DA, 53421DA (Part No: CBK-H152)
$33.45

Main Bearing Set - .010 inch. For tractor models 300, 350, (H serial number 391358 and up), (HV serial number 391358 and up), (O4 serial number 33340 and up), (OS4 serial number 33340 and up), Super H, Super HV, Super W4, (W4 serial number 33340). (Part No: MBK164-010)
$92.54

Main Bearing Set - Main Bearing Set (standard). For H and HV to serial number 391357, and for 04, 0S4 and W4 to serial number 33339. Standard size replaces 2-43707DAX and 1-43708DAX. If other than standard specify size of (.010 or .020) in "comments" when ordering. (Part No: MBK152)
$94.10

Main Bearing Set - Main Bearing Set (standard) H and HV - (both with serial number 391358 and up). Also C152 GAS on O4, OS4 and W4-(all with serial number 33340 and up). C164 GAS engine on Super H, Super HV, Super W4. C169 GAS engine on 300 and C175 GAS engine on 350. (Part No: MBK164)
$85.68

Rod Bearing Set - .020 inch. For tractor models 300, 350, (H serial number 391358 and up), (HV serial number 391358), (O4 serial number 33340 and up), (OS4 serial number 33340 and up), Super H, Super HV, Super W4, (W4 serial number 33340 and up). (Part No: CRK164-020)
$55.10

Rod Bearing Set - Rod Bearing Set (standard). For H and HV to serial number 391357 and for 04, 0S4 and W4 to serial number 33339. Standard size replaces 4-43788DBX. If other than standard, specify size in comments (.002, .010 and .020). (Part No: CRK152)
$74.02

Rod Bearing Set - Rod Bearing Set (standard). If other than standard specify size of (.010 or .020) in "comments section" when ordering. Fits the following: C152 GAS engine on H and HV (both with serial number 391358 and up). Also C152 GAS on O4, OS4 and W4 (all with serial number 33340 and up). C164 GAS engine on Super H, Super HV, Super W4. C169 GAS engine on 300 and C175 GAS engine on 350. (Part No: CRK164)
$48.80

Engine Gaskets
Complete Gasket Set - Complete Overhaul Gasket Set with crankshaft seals. For H, HV, O4, OS4, W4, Super H, Super HV, Super W4 (Part No: GK7509S)
$141.73

Crankshaft Seal Front - Fits, 152 CID, 164 CID, 169 CID, 175 CID 4 cylinder gas engines: Models, 300, 350, H serial number <106970, H serial number 106908-391357, H serial number 391358>, HV serial number <106970, HV serial number 106908-391357, HV serial number 391358>, O4 serial number <33339, O4 serial number 33340>, OS4 serial number <33339, Super H, Super HV, Super W4, W4 serial number <33339, W4 serial number 33340>. Replaces: 286947R91, 358787R91, 297226R91, 338874R91, 358825R91, 288864R93, 358786R91, 360692R91, 51494DA, 53888D. (Part No: 360692R91)
$21.42

Crankshaft Seal Rear - Fits, 152 CID, 164 CID, 169 CID, 175 CID gas 4 cylinder engines: Models, 300, 350, H serial number 106908-391357, H serial number 391358>, HV serial number <106970, HV serial number 106908-391357, HV serial number 391358>, O4 serial number <33339, O4 serial number 33340>, OS4 serial number <33339, OS4 serial number 33340>, Super H, Super HV, Super W4, W4 serial number <33339, W4 serial number 33340>. ** Sold in multiples of 2, priced each. (Part No: 45014D)
$6.54

Gasket Set, Upper - 152 CID 4 cylinder gas engines. For tractor models H serial number <106970, H serial number 106908 to 391357, H serial number 391358<, HV serial number <106970, HV serial number 106908 to 391357, HV serial number 391358<, O4 serial number <33339, O4 serial number 33340<, OS4 serial number <33339, OS4 serial number 391358<, W4 serial number <33339, W4 serial number 391358<. Replaces 354475R94 and 354475R1. (Part No: 354475R1)
$107.82

Gasket, Water Header - For tractor models 300, 350, H, Super H, Super HV. (Part No: 45266DA)
$4.76

Manifold Gasket Set - Manifold gasket set, contains two 1342802C1 gaskets. Used with manifolds 8033DCX and 352536R21. For tractor models 300, 350, H, HV, O4, OS4, Super H, Super HV, W4 (Part No: MS8774B)
$6.45

Oil Pan Gasket - OIL PAN GASKET For tractors with 152 CID Gas engines in models 300, 350, H, HV, O4, OS4, Super H, Super HV, Super W4, W4 (Part No: 45267DA)
$10.25

Oil Seal - Fits: [A, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240 (use as a flat belt pulley shaft seal)], [H, HV, Super H, Super HV (use as a transmission counter shaft front seal)], [O4, W4 (Used as a brake shaft oil seal)]; The seal measures 1.375 inches inside diameter, 2.110 inches outside diameter, 0.315 inches wide. Replaces: 356502R91, 356503R91, 358781R91, 358820R91, 367810R91, 369146R91, 43308D, 43660D, 48308D, 48954D, 71700C1, 71701C1. (Part No: 71701C1)
$9.93

Oil Seal - Oil seal, driving shaft. For tractor models H, Super H. Replaces: 383159R91, 383160R91, 357967R91, 103331H, 79634H, 79634H1, 70258D (Part No: 383159R91)
$8.79

Rear Crankshaft Seal Kit - Fits tractor models H, HV, I4, O4, OS4, Super H, Super HV, Super W4, W4 (with C152, C164, C175 gas or LP engines), 300, 350 (with C152, C164, C175 gas or LP engines), [International: 300, 350 (with C152, C164, C175 gas or LP engines); Replaces: 46959D, 46959DA, 379617R91, 45014D, 45013DA, 45012DA, 45012DB, 45013D, 25093DA (Part No: IHS2636)
$24.50

Engine Rebuild Kits
Basic Engine Overhaul Kit, Less Bearings, C152 Gas or Distillate, Flat Head Pistons - Models: H and HV to serial number 391357, and O4, OS4, W4 to serial number 33339. Basic overbore 3-3/8 inch to 3-7/16 inch Engine Kit less the bearings (C152 CID Gas OR Distillate 4-cylinder engine). For tractors with flat head pistons. Kit contains sleeves, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals. Engine bearings are available separately (see Engine Bearings Category). (Part No: BEKH1152A-LCB)
$490.34

Basic Engine Overhaul Kit, Less Bearings, C152 Gas or Distillate, Flat Head Pistons - Models: H and HV serial number 391358 and Up, O4, OS4, W4 serial number 33340 and Up. Basic overbore 3 3/8 inches to 3 7/16 inches Engine Kit, Less Bearings (C152 CID Gas OR Distillate 4-cylinder engine) For tractors with flat head pistons. Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Part No: BEKH1152E-LCB)
$490.34

Basic Engine Overhaul Kit, Less Bearings, C152 Gas, Stepped Head Pistons - Models: H and HV serial number to 391357, O4, OS4, W4 to serial number 391357. Made by TISCO. Basic overbore 3 3/8 inches to 3 7/16 inches Engine Kit, Less Bearings (C152 CID Gas 4-cylinder engine). For tractors with stepped head high compression pistons-valve length 5-5/16 inches. Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Part No: BEKH1156A-LCB)
$549.52

Basic Engine Overhaul Kit, Less Bearings, C152 Gas, Stepped Head Pistons - For tractor models H & HV serial number 391358 and Up. Made by TISCO. Basic overbore 3 3/8 inches to 3 7/16 inches Engine Kit, Less Bearings (C152 CID Gas 4-cylinder engine). For tractors with stepped head high compression pistons-valve length 5-5/16 inches. Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Part No: BEKH1156E-LCB)
$549.52

Basic In-Frame Engine Kit, C152 Gas, Flat Head Pistons - Made by TISCO. In Frame Engine Kit For tractor models (C152 CID Distillate 4-cylinder engine) Overbore 3 3/8 inches to 3 7/16 inches. For tractors with flat head pistons. Models: H and HV, O4, OS4, W4. Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Part No: BIFH1152A)
$398.43

Basic In-Frame Engine Kit, C152 Gas, Stepped Head Pistons - 6. Made by TISCO. In Frame Engine Kit. (C152 CID Gas 4-cylinder engine) Overbore 3 3/8 inches to 3 7/16 inches. For tractors with stepped head high compression pistons-valve length 5-5/16 inches. For tractor models H, HV, O4, OS4, W4. Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Part No: BIFH1156A)
$405.11

Engine Overhaul Kit - Made by TISCO. Overhaul kit for H and HV serial number 106908 to serial number 391357 (C152 CID 4-cylinder gas), (flat head standard compression pistons). (stepped head available). Contains sleeve and piston kit (sleeves, pistons and rings, pins and retainers, overbore from 3-1/8 inch to 3-7/16 inch). Piston pin bushings. Complete gasket set. Connecting rod bearing kit. Main bearing kit. Valve parts (intake and exhaust valves, springs, guides and keys). Available with Std., .010 inch or .020 inch bearings. IMPORTANT: Specify rod and main bearing sizes, and the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Part No: EOK1152C)
$780.91

Engine Overhaul Kit - Made by TISCO. Overhaul Kit For H and HV serial number 391358 and up (C152 CID 4-cylinder gas) (flat head standard compression pistons. Stepped head available) Contains sleeve and piston kit (sleeves, pistons and rings, pins and retainers, overbore from 3-1/8 inch to 3-7/16 inch). Piston pin bushings. Complete gasket set. Connecting rod bearing kit. Main bearing kit. Valve parts (intake and exhaust valves, springs, guides and keys). Available with Std., .010 inch or .020 inch bearings. IMPORTANT: Specify rod and main bearing sizes, and the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Part No: EOK1152E)
$768.15

Engine Overhaul Kit, Less Bearings - Made by TISCO. Overhaul kit, less bearings (C152 CID Distillate 4-cylinder engine). For tractors with flat head pistons. Models: H and HV To serial number 391357 and O4, OS4, W4 To serial number 33339. Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings. Complete gasket set with crankshaft seals. Intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Part No: EOK1152-LCB)
$604.99

Engine Overhaul Kit, Less Bearings - Made by TISCO. Overhaul kit, less bearings (C152 CID Distillate 4-cylinder engine). For tractors with flat head pistons. Models: H and HV serial number 391358 and up, O4, OS4, W4 to serial number 33340 and up. Kit contains sleeves and sleeve seals. Pistons and piston rings, pins and retainers, pin bushings. Complete gasket set with crankshaft seals. Intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Part No: EOK1152B-LCB)
$604.99

Engine Overhaul Kit, Less Bearings - Made by TISCO. Overhaul kit, less bearings (C152 CID Gas 4-cylinder engine). For tractors with flat head standard compression pistons, valve length 5-5/16 inch. Models: H and HV to serial number 106907, O4, OS4, W4, to serial number 33339. Kit contains sleeves and sleeve seals. Pistons and piston rings, pins and retainers, pin bushings. Complete gasket set with crankshaft seals. Intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Part No: EOK1152A-LCB)
$592.25

Engine Overhaul Kit, Less Bearings - Made by TISCO. Overhaul kit, less bearings (C152 CID gas 4-cylinder engine). For tractors with flat head standard compression pistons, valve length 5-15/32 inch. Models: H and HV serial number 106908 to serial number 391357. Kit contains sleeves and sleeve seals. Pistons and piston rings, pins and retainers, pin bushings. Complete gasket set with crankshaft seals. Intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Part No: EOK1152C-LCB)
$643.09

Engine Overhaul Kit, Less Bearings - Made by TISCO. Overhaul kit, less bearings (C152 CID gas 4-cylinder engine). For tractors with flat head standard compression pistons, valve length 5-15/32 inch. Models: H and HV serial number 391358 and up. Kit contains sleeves and sleeve seals. Pistons and piston rings, pins and retainers, pin bushings. Complete gasket set with crankshaft seals. Intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Part No: EOK1152E-LCB)
$643.09

Engine Overhaul Kit, Less Bearings - Made by TISCO. Overhaul kit, less bearings (C152 CID gas 4-cylinder engine). For tractors with stepped head high compression pistons, valve length 5-5/16 inch. Models: H and HV To serial number 106907, O4, OS4, W4 to serial number 33339. Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings. Complete gasket set with crankshaft seals. Intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS MUST BE ORDERED SEPARATELY. IMPORTANT: Specify rod and main bearing sizes, and the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Part No: EOK1156A-LCB)
$598.93

Engine Overhaul Kit, Less Bearings - Made by TISCO. Overhaul kit, less bearings (C152 CID gas 4-cylinder engine). For tractors with stepped head high compression pistons, valve length 5-15/32 inch. Models: H and HV serial number 106908 to serial number 391357. Kit contains sleeves and sleeve seals. Pistons and piston rings, pins and retainers, pin bushings. Complete gasket set with crankshaft seals. Intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Part No: EOK1156C-LCB)
$649.77

Engine Overhaul Kit, Less Bearings - Made by TISCO. Overhaul kit, less bearings (C152 CID gas 4-cylinder engine). For tractors with stepped head high compression pistons, valve length 5-5/16 inch. Models: H and HV serial number 391358 and up. Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings. Complete gasket set with crankshaft seals. Intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Part No: EOK1156E-LCB)
$649.77

Major Overhaul Kit - 152 CID 4 cylinder gas engines overbore 3-3/8 inch to 3-7/16 inch. For tractor models H serial number 391358>, HV serial number 391358>, O4 serial number 33340>, OS4 serial number 33340>, W4 serial number 33340>. Kits include, 4 piston liner kits, 1 main bearing set, 4 connecting rod bearings, 4 piston pin bushing, 1 front crank seal, 1 cam bearing set, 1 gasket overhaul set with rear seal. **IN COMMENT SECTION SPECIFY ROD and MAIN BEARING SIZES, PISTON TYPE (FLAT OR STEPPED HEAD), PIN BUSHING SIZE (.935 inch or 1.168 inch)** (Part No: OK214)
$754.97

Valve Overhaul Kit, C152 Gas Engine - Fits 4 cylinder C152 engine on : H, HV, to serial number 106907, O4, OS4, W4. Kit includes Valves (5-5/16 inch length), valve springs (for non-roto exhaust valve), valve keys, valve guides. (Part No: VOKH152B)
$121.40

Valve Overhaul kit, C152 Distillate Engine - Fits H, HV, O4, OS4, W4 (4 cylinder C152 DISTILLATE engine). Kit includes valves, valve springs (for non- roto exhaust valve), valve keys, valve guides. (Part No: VOKH152A)
$174.09

Valve Overhaul kit, C152 Gas Engine - Fits H, HV, serial number 106908 and up, Super H, HV, Super, W4, 300, 350, (4 cylinder gas C152, C164, C169, C175). Kit includes valves (5-15/32 inch length), valve springs (for non-roto exhaust valve), valve keys, valve guides. (Part No: VOKH152C)
$227.88

Engine Parts
Camshaft Timing Gear - 48 teeth. For tractor models (H, HV with C-152 engine), (Super H, Super HV with C-164), (300 with C-169). Replaces 6664D, 6664DA, 6664DB (Part No: 6664DB)
$91.77

Connecting Rod - Reconditioned. For tractor models H, W4 gas with 1.109 inch wrist pin and casting number 43785DC. (Part No: R1201862)
$109.49

Connecting Rod Bolt Lock Tab - .420 inch bolt hole diameter. For tractor models H, HV, I4, O4, OS4, Super H, Super HV, Super W4, W4, 300, 350 gas or LP. (Part No: 47499DB)
$4.27

Crankshaft Timing Gear - 24 teeth. For tractor models (H, HV with C-152 engine), (Super H, Super HV with C-164 engine), (300 with C-169 engine). Replaces: 43706D (Part No: 43706D)
$61.48

Crankshaft, Reground - For H & W4. Includes Rod & Main bearings. For casting number 43734DB (the number stamped on your crank must match this number EXACTLY). NO CORE (Part No: 43734DB)
$701.02

Cylinder Head Service Kit - Contains Springs, Guides and valve lock. Cylinder HEAD Service KIT For 300, 350, H, HV, Super H, Super HV, Super W4 (Part No: VSKH152C)
$68.72

Cylinder Head Stud - 7/16 inch x 6 1/8 inch. For gas and LP Models: H, HV, I4, O4, OS4, Super H, Super HV, Super W4, W4, 300, 350. 5 Used per engine. Replaces 48939DA (Part No: 48939DA)
$12.82

Cylinder Head Stud - 7/16 inch diameter x 5-15/16 inches long. Fits H, HV, I4, O4, OS4, Super H, Super HV, Super W4, U164, U4, W4 Industrial: 300, 350, Farmall: 300, 350. 11 used per engine, gas and LP. Replaces: 45009D. (Part No: 45009D)
$12.38

Governor Spring - This Internal Governor Spring is 2.700 inches overall length with 0.110 inch wire diameter. It fits H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super MV, T6, T9, W4 Through 9 Series, W6, W6TA, W9, WR9, WR9S, 300, 350, 400, 450, 600, 650, Wheatland: 400, 450. It replaces original part numbers 357012R1 and 49407DBX. (Part No: 49407DBX)
$8.95

Governor Throttle Shaft Rebuild Kit - This Governor Throttle Shaft Rebuild Kit fits: H, HV, I4, I6, M, MV, O4, O6, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, T6, T6-61, U4, U6, W4, W6, 300, 350, 400, 450 all Gas and LP. Replaces: Cotter pin: 103361, Pin: 103494, Groove pin: 142952, Bushing: 45696D, Felt washer: 48493D, Lever: 6288D, Gasket: 48501D, 53877DB, 66272DA. Kit includes: lever, bushing, felt washer, (3) gaskets, groove pin, cotter pin, and pin. (Part No: IHS2559)
$38.95

Hand Starting Crank - For tractor models H, Super H, M, Super M, Super MTA, 300, 350, 400, 450. Hand Starting Crank. Less Spinner. (Part No: 51544DBX)
$73.43

Ring Gear Flywheel - For tractor models H, Super H, Super W4, 300, 330, 340, 350. This flywheel has 104 teeth, 13.165 inches outside diameter, 12 inches inside diameter, .550 inches wide. (Part No: 45638DB)
$50.14

Valve Exhaust - Exhaust Valve, length 5-5/16 inch. For tractor models H, HV, O4, OS4, W4, Super H, Super HV, Super W4. Price is for EACH. Minimum order is 4. (Part No: 50707DA)
$19.15

Valve Guide Set - Eight per package, enough for 1 engine. For tractor models 300, 350, H, HV, O4, OS4, Super H, Super HV, Super W4, W4. (Part No: 8049DR)
$36.40

Valve Keys - Sold as package of 8. Enter quantity 1 for 8 pieces. 16 required per engine (2 packages of 8). For tractor models 100, 130, 140, 200, 22, 230, 240, 300, (330, 340 serial number less than 100500), 350, 62, 76, 81, A, A1, AV, AV1, B, BN, C, H, HV, O4, OS4, Super A, Super AV, Super C, Super H, Super HV, Super W4, (U2, U2A serial number less than 22113), W4. Replaces 42026D, 70206880, 42026DGV, 500327, 70206880GV, 7HA6518GV, A30004, G11929. (Part No: 7HA6518)
$2.51

Valve Set, Exhaust - Set of 4 Exhaust Valves. For tractors with flat head pistons. Models: H and HV, O4, OS4, W4, Super H, Super HV, Super W4. 5.08 inch length, 1.38 inch head diameter. (Part No: 57697D)
$58.14

Valve Set, Exhaust - Set of 4 Exhaust Valves. For tractors with flat head standard compression pistons, valve length 5-15/32 inch. Models: H, HV, 300, 350. (Part No: 362535R1)
$114.10

Valve Set, Intake - Set of 4 Intake Valves. For tractors with flat head pistons. Models: H and HV, O4, OS4, W4, Super H, Super HV, Super W4. 5.05 inch length, 1.50 inch head diameter. (Part No: 57696D)
$54.37

Valve Set, Intake - Set of 4 Intake Valves. For tractors with flat head standard compression pistons, valve length 5-15/32 inch. For tractor models H, HV, 300, 350. (Part No: 362534R1)
$45.48

Valve Spring - Used on valves with length of 5-5/16 inch. For tractor models 100, 130, 140, 200, 22, 230, 240, 62, 76, 81, A, AV, A1, AV1, B, BN, C, H, HV, O4, OS4, Super A, Super AV, Super AV1, Super C, (U2, U2A serial number less than 22113), W4. 8 Used Per Tractor. Sold individually. (Part No: 24544DA)
$2.81

Valve Springs - Quantity of eight. For tractor models 300, 350, H, HV, O4, OS4, Super H, Super HV, Super W4, W4. (Part No: 358197R1)
$5.16

Valve, Intake - Intake Valve. GAS. Length 5-5/16 inch. For tractor models H, HV, O4, OS4, W4, Super H, Super HV, Super W4. Price is for EACH. Minimum order is 4. (Part No: 50706DA)
$18.58

Engine Pistons and Sleeves
Pin Bushing - Piston pin bushing, 4 used per engine. For C152 CID 4 cylinder engine in tractors H, HV, O4, OS4, W4. For H, HV, O4, OS4, Super H, Super HV, Super W4, W4. Minimum order quantity is 4. Order will be increased to multiples of 4. (Part No: 25998H)
$16.91

Piston Sleeve - 3 7/16 Overbore - Sleeve for H, HV, O4, OS4, W4. Verify bore size. Price is for each sleeve. 4 Required per engine. (Part No: SD22)
$67.25

Piston, Stepped Head - Overbore 3-3/8 inch to 3/7/16 inch. Four ring piston fits 152 CID 4 cylinder gas engines: Models, H serial number <106970, H serial number 106908-391357, H serial number 391358>, HV serial number <106970, HV serial number 106908-391357, HV serial number 391358>, O4 serial number <33339, O4 serial number 33340>, OS4 serial number <33339, OS4 serial number 33340>, W4 serial number <33339, W4 serial number 33340>. Uses PRS156 ring set. (Part No: PA321)
$69.02

Sleeve & Piston Kit - For H. Sleeves, (flat head) pistons & rings, pins & retainers. Overbore from 3-3/8 to 3-7/16 inch. (Part No: PK152)
$322.04

Sleeve & Piston Kit - For H. Sleeves, (stepped head) pistons & rings, pins & retainers. Overbore from 3-3/8" to 3-7/16". (Part No: PK156)
$300.83

Engine Rings
Piston Ring Set - 3-7/16 inch overbore. Complete ring set for 4 pistons. For C152 CID DISTILLATE 4 cylinder engine. Contains 3 compression rings 3/32 and oil ring 3/16 per cylinder. For H and HV to serial number 391357, O4, OS4, W4 to serial number 33339. For H, HV, O4, OS4, W4. (Part No: PRS152)
$65.58

Piston Ring Set - 3-7/16 inch overbore. Complete ring set for 4 pistons. Contains 3 compression 3/32 and oil ring 3/16 for each cylinder. For C152 CID gas 4 cylinder engine used on H and HV, O4, OS4, W4. (Part No: PRS156)
$65.58

Piston Ring Set - 3-3/8 inch bore. Includes 1/8 inch (1) COMP RING, 5/32 inch (2) COMP RINGS, and 1/4 inch (1) OIL RING. Complete set for 1 engine. For C152 engine in models: H, HV, O4, OS4, W4. (Part No: 2C726)
$119.19

Piston Ring Set - 3-3/8 inch bore. Includes (3)3/32 inch COMP RING, (1) 1/4 inch OIL RING per piston. Complete set for 1 engine. For C152 engine in model H. (Part No: 1486646)
$112.57

Piston Ring Set - 3-7/16 inch overbore. Complete ring set for 4 pistons. Contains 3 compression rings ((2) 3/32 and (1) 1/8) and (1)1/4 oil ring for each cylinder. For C152 CID gas 4 cylinder engine used on H and HV, O4, OS4, W4. (Part No: 2C7790)
$119.43

Piston Ring Set - Complete ring set for 4 pistons. Contains 3 compression 3/32 inch and 1 oil ring 1/4 inch per cylinder. Piston Ring Set 3-9/16 inch bore. Complete ring set for 4 pistons. For C152 CID gas 4 cylinder engine used on H and HV, O4, OS4, W4. For C169 300 Farmall and C175 2400B, 3400A. (Part No: 2C7547)
$118.82

Piston Ring Set - overbore 3-7/16 inch ring set. 12 compression rings 3/32 inch, 4 oil rings 1/4 inch. For tractor models (H, HV up to serial number 391357), (I4, O4, OS4, W4 up to serial number 33339). (Part No: 2C5669)
$113.83

Exhaust System
Exhaust Pipe - Short threaded pipe screws into manifold. 10.5 inches long, 2 3/8 inch outside diameter. For 300, 350, H, Super H, Super W4, W4; all GAS engines. (Part No: 62476D)
$14.07

Exhaust Stack, Chrome, Curved - Double wall. 2 3/8 inch inlet inside diameter, 27 inches overall length, 3 1/2 inches outside diameter. For tractor models H, Super H, M, Super M, Super MTA, 300, 350, 400, 450, 460, 560. (Part No: R4451)
$135.44

Exhaust Stack, Chrome, Straight - Double wall, 2 3/8 inch inlet, 3 1/2 inch outlet, 24 inches overall length. For tractor models H, Super H, M, Super M, Super MTA, 300, 350, 400, 450, 460, 560. (Part No: R4450)
$114.61

Manifold - Heavy duty intake/exhaust manifold comes with short straight pipe for vertical exhaust that screws into manifold. For 300, 350, H, Super H, Super W4, W4; all GAS engines. Includes gaskets. Replaces: 362536R21, 8033DC (Part No: 8033DCX)
$166.15

Muffler - Vertical muffler for tractors. 6 inch round body replaces oval body mufflers. inlet inside diameter 2-3/8 inch, outlet outside diameter 2-1/2 inch, total length 29 inches, diameter 6 inch round body. For gas tractor models: H and Super H, M and MV Super M and Super MTA, W4 and Super W4, W6 and Super W6, W6TA, (300 and 350 with C-175 gas), (400 and 450 with C-281 gas or D-281 diesel), (460 and 606 with C221 gas or D-236 diesel), (560 with C-263 gas or D-282 diesel). Replaces: 350601R95, 370773R91, 403551R1. (Part No: 403551R1)
$26.81

Muffler Clamp With Hardware - Muffler clamp with hardware. For tractor models 300, 330, 340, 350, 400, 450, 460, 504, 560, 606, 660, 706, H, HV, M, MD, Super H, Super HV, Super M, Super MD, Super MTA, Super W6, W4, W6, WD6. (Part No: 350602R1)
$8.25

Muffler Oval - Muffler. Vertical muffler for tractors. 6 inch. Oval body replaces oval body mufflers. Inlet inside diameter 2-3/8 inch, outlet outside diameter 2-1/2 inch, total length 29 inches, diameter 6 inch round body. For gas tractor models: H and Super H, M and MV Super M and Super MTA, W4 and Super W4, W6 and Super W6, W6TA, (300 and 350 with C-175 gas), (400 and 450 with C-281 gas or D-281 diesel), (460 and 606 with C221 gas or D-236 diesel), (560 with C-263 gas or D-282 diesel). (Part No: 403551R1-OVAL)
$83.01

Muffler, Vertical - For tractor models H, HV, O4, OS4, Super H, Super HV, Super W4, W4. Vertical, 5 1/2 inch round, 2 3/8 inch inlet inside diameter, 2 1/2 inch outlet outside diameter, 29 inch overall length. (Part No: 350600R95)
$31.58

Vertical Exhaust Muffler - This stainless steel muffler fits the following tractors models: H, HV, I4, Super H, Super HV, W4, and Super W4. It also replaces the OEM part numbers: 355869R1 and 350600R95. The inlet length is 1 7/8 inches and the inlet inside diameter is 2 3/8 inches. The shell length is 10 1/4 inches and the shell diameter is 5 1/2 inches. The outlet length is 13 1/4 inches and the outlet outside diameter is 1 3/4 inches. The overall length is 27 7/8 inches. (Part No: 51070D)
$114.54

Fuel System / Air Intake
Air Cleaner Cap - Old style dome shape. For tractor models H, Super H, W4, 300, 350. Replaces 353019R92. Fits inside of pipe. (Part No: 355935R91)
$24.75

Air Cleaner Cap - This Air Cleaner Cap has a 2 inch inside diameter and 5.25 inch body diameter. It fits outside of the air cleaner pipe. Replaces 49461DA, 35575A, 768152M1, 10A8040 (Part No: 10A8040)
$31.50

Air Cleaner Cap - Newer style mushroom shape. For tractor models H, Super H, W4, 300, 330, 340, 350, 404, 424, 444, 504 Gas. Air Cleaner Cap 2 inch inside diameter. Replaces OEM numbers 51435DBX, 355935R91, 353019R91. (Part No: 51435DBX)
$44.26

Air Cleaner Pipe - This Air Cleaner Pipe fits: H, HV, I4, W4. It has a 1-3/4 inch outside diameter and is 12-3/4 inches overall length. It replaces 51437D. (Part No: 51437D)
$29.75

Basic Carburetor Kit - For IH 45108DB Carburetor. These carburetors came on H, HV and W4 models. (Part No: IHCK12)
$13.48

Carburetor Float - For updraft International carburetors 45108DB, 45108DC, 45108DD, 50981DA, 50981DB, 50981DC, 50981DD. For tractor models H, HV, O4, OS4, W4. Replaces 45114D, 45114DD, 45114DC, 45114DB, IHS203. (Part No: 45114DX)
$15.00

Carburetor Fuel Line Fitting With Strainer - Fits INTERNATIONAL carburetors: 356948R92, 35865R91, 366066R91, 367258R92, 367259R92, 372723R92, 378196R94, 379813R91, 380956R91, 381984R91, 388297R92, 388424R92, 388425R96, 390082R92, 396197R93, 45108DB, 45108DC, 50981DA, 50981DB, 50983DB, 52714D, 52814DA, 52815D, 52815DA, 533622R91, 53873DF, 53873DH, 539575R91, 56543DE, 60329DA (Part No: 29902DX)
$15.00

Carburetor Kit, Basic - For tractor models H, HV and 4 (Distl.) with OEM# 45108DB and 50981DA. Contains the following parts with instructions. Includes: gaskets, seats, and springs. (Part No: BK10V)
$13.49

Carburetor Kit, Comprehensive - For tractor models H, HV and 4 (Distl.) with OEM# 45108DB. Contains the following parts for a Major Overhaul with instructions. Includes: gaskets, needles, seats, shafts, springs, and mixture screw. Does not include float. (Part No: C510V)
$48.38

Carburetor Kit, Comprehensive - For H, HV and 4 with Zenith 50981DA, 50981DC. Contains the following parts for a Major Overhaul with instructions. Includes: gaskets, needles, seats, shafts, springs, and mixture screw. Does not include float. (Part No: C510HV)
$48.38

Carburetor Venturi - For carburetors: 45108D, 45108DA, 45108DB, 45108DC, 45108DD or 50981D, 50981DA, 50981DB, 50981DC, 50981DD. Zinc, like the original. (Part No: 64986D)
$34.60

Carburetor, New OEM - This is a "Like Original" reproduction carburetor fits: H, HV, I4, O4, OS4, U4, W4. Replaces: 50981DA, 50981DB, 50981DC, 50981DD, 45108DB, 45108DC, 45108DE, 50981D, 6212DB, 6213DB. This carburetor is tagged as 50981DR and uses original replacement parts for the 50981DC. (Part No: 50981DC)
$310.50

Carburetor, Rebuilt - Fits H - replacement for OEM 50981DC, 45108DD. Additional $125.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1412-CARB)
$151.80

Comprehensive Carburetor Kit - For tractor models H, HV and W4. Use with International carburetor number 45108D, 45108DB, 45108DC, 45108DD, 45108DE, 50981D, 50981DA, 50981DB, 50981DC, 50981DD, Casting number: 6212DB, 6213DB (Part No: R7523)
$62.10

Friction Disk - This friction disk is for tractor models H and M. Friction Disk for FTL153 Throttle Assembly Priced each. If you order 1, you will receive 1 disk. Must be ordered in multiples of 5. (Part No: TD153)
$3.32

Fuel Cap - For A, Super A, AV, B, BN, C, Super C, H, Super H, M, Super M, Super MTA, Cub, Cub Lo-Boy, 100, 130, 200, 230, 300, 350, 400, 450. Tall Cap is 2 1/2 inches tall, Triple Baffle Style. (Part No: R3654)
$30.00

Fuel Cap - 1 15/16 inch overall outside diameter fits many: 240, 300, 350, 400, 450, 600, 650, H, HV, M, MD, MDV, O4, O6, ODS6, OS4, OS6, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super W6, Super WD6, Super WD9, Super WDR9, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S. (Part No: 40756D)
$10.56

Fuel Cap - Black - (Vented) - Black Fuel Cap. REPLACES : 361910R91, 538063R1, 224839C91, 224839C92. Fits MOST: A, C, Cub, Cub Lo-Boy, Cub 185-Lo-Boy, H, M, MD, Super A, Super C, Super H, Super M, Super W4, Super W6, W6, W9, 100, 130, 140, 184, 200, 230, 300, 330, 340, 350, 400, 403, 404, 424, 444, 450, 460, 503, 504, 544, 560, 606, 615, 656, 706, 715, 756, 766, 806, 815, 826, 856, 915, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1640, 1660, 1670, 1680, 2404, 2424, 2444, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2856, 4156, 4166, 4186. Cap fits neck inside diameter of 1 7/8 inches using 2 locking tabs. (Part No: 23995DC)
$7.37

Fuel Cap, Chrome, Unvented - Fits MOST of the following GAS and Diesel tractors: Cub, Cub Lo-Boy, A, Super A, B, C, Super C, H, Super H, M, Super M, 04, 06, W4, W6, Super W4, Super W6, W9, 100, 130, 140, 4156, 4166, 4168. Cap fits neck inside diameter of 1 7/8 inches using 2 locking tabs. (Part No: 23995DC-CHROME)
$7.23

Fuel Cap, Top Vented - 2-11/16 inch inside diameter, 1.500 inch height (including splash guard) and 1.118 inch height cap only. Says "Buy Clean Fuel Keep it Clean". For tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy (WILL NOT FIT 154, 184, 185), F12, F14, F20, F30, H, HV, I4, I6, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MV, Super W4, Super W6, Super WD9, Super WDR9, T4, T5, T6, T9, TD14, TD14A, TD15, TD18, TD18A, TD20, TD6, TD9. (Part No: 12770D)
$10.50

Fuel Cap, Vented - For MOST Models: A, Super A, B, C, Super C, H, Super H, M, Super M, Cub, 100, 130, 200, 230, 300, 350, 400, 450. Says Buy Clean Fuel . Cap fits neck inside diameter of 1 7/8 inches using 2 locking tabs. Replaces IHS226, AR369R, AD709R, AH83351, B824, 7A824, 161945A, 30-3049558. (Part No: 23995DA)
$7.29

Fuel Line - 25 inches long. For model H gas only NOT for kerosene or distillate. (Part No: 56451DX)
$38.45

Fuel Line, From Tank - For tractor models H and HV serial number 50866 and up. Fuel line, metal pipe from fuel tank to strainer with two nuts. Restoration quality. (Part No: 58367DAX)
$33.16

Fuel Line, To Carburetor - For tractor models H and HV serial number 50866 and up. Fuel line, metal pipe from fuel strainer to carburetor with two nuts. Restoration quality. (Part No: 58366DX)
$40.17

Gas Lever - For H, M. Gas Lever Friction Disc and Spring Combination. Easily attaches with 2 bolts. Allows accurate speed control setting. Replacement Spring (HGL5), and Friction Disc (TD153-only in multiples of 5) are available. replaces A533166, A51348DAX, A-51348DAX, A 533166 (Part No: FTL153)
$33.53

Gas Line With FTG - Buna-N flex gas line. For tractor models 300, 350, 400, H, M, Super H, Super M. Line has 5/16 Inverted Flare Fittings. Additional hardware may be required. Replaces part numbers: 60684D, 58363DX, 56512DX, 56451DX, and 359481R11. (Part No: FLM16)
$22.56

Governor Control Sector - Governor control sector with pivot pin for tractors: H and HV, Super H and Super HV, M and MV, Super M and Super MV. (Part No: 51351DBXA)
$85.04

Precleaner Assembly - Complete, glass dust bowl assembly, 2 inch inside diameter base, just like the original. For tractor models H, Super H, HV, I4, O4, OS4, W4, Super W4, 300, 350. (Part No: 59095D)
$48.30

Sediment Bowl Assembly - Fuel Strainer assembly with 2.25 inch bowl, 1/8 inch pipe thread to fuel line, 3/8 inch pipe to tank for gasoline tractors: H, HV, M, Super M and MTA, O4, OS4, W4, 460, 560, 600, 650, 656, 660, 706, 756, 766, 806, 826, 856. Replaces OEM numbers 358245R91 and 370832R91. (Part No: S.61581)
$15.74

Sediment Bowl Assembly Glass Bowl - Fits S.61581 fuel strainer. For tractor models H, HV, M, Super M & MTA, O4, OS4, W4, 460, 560, 600, 650, 656, 660, 706, 756, 766, 806, 826, 856. (Part No: S.65504)
$5.18

Sediment Bowl Assembly, Dual Tank - For tractors using two tanks. 3/8 inch pipe inlet, 5/16 inch compression outlets x 2. For tractor models A, B, BN, C, I4, I6, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, (H, HV serial number 50866 and up), (M serial number 24215 and up), (MV serial number 24215 and up), (O4, W4 serial number 1130 and up), (O6 serial number 1317 and up), (W6 serial number 1317 and up) with Distillate or All Fuel. Replaces 370831R91, 51495DD, 58361DAX, IHS713. YOU MAY NEED A 90 DEGREE ELBOW - NOT SUPPLIED BY YESTERDAYS TRACTOR. (Part No: 17215DA)
$66.93

Throttle Plate Assembly - This is a Square Tooth Throttle Control Assembly (Governor Control Assembly) used on H, HV, M, MTA, MV, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA. Replaces: Handle: 361244R11, Sector: 361246R11, Assembly: 366727R91 (Part No: 366727R91)
$53.13

Throttle Plate Assembly - H, HV, M, MTA, MV, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA; Replaces: Saw tooth Lever: 51348DAX, Saw tooth sector: 51351DBX, 51351DBXA (Part No: 51351DBX)
$47.61

Throttle Spring - Replacement Spring for FTL153 Throttle Assembly. (Part No: HGL5)
$2.33

Gauges
Amp Gauge - 20-20 style - with IHC Logo. For A, B, C, H, M, W-4, W-6, W-9 (to 1946). (Part No: R4186)
$25.99

Amp Gauge - D-O-C Style - with IH Logo For Super A, Super C, H, Super H, M, Super M, Super MTA, Cub (From 1955), W4, W6, 200, 230, 240, 300, 350, 400, 450. Replaces 393334R91, 378424R91, 360053R92, IHS395. (Part No: 360053R91)
$8.24

Amp gauge - Gauge, ammeter has 20-0-20 range. Original style with IH Logo. Fits 2 inch diameter hole, stainless steel bezel, black background, white letters and white pinter for tractors: Cub, A, B, Super A, A1, AV, AV1, C, Super C, H, HV, Super H, HV, M, MV, MDV, MD, Super M, MTA, O-4, OS-4, O-6, OS-6, W4, W6, WD-6, W-9, WR-9, WDR-9. Replaces 725-3023, 925-3141, IHS418. (Part No: 354473R91)
$8.24

Fuel Gauge Cap Gasket - Gasket fits our Fuel Gauge Cap part numbers 365498R91, 365495R91 and 365499R91. (Part No: 43984D)
$2.09

Oil Gauge - Oil pressure gauge, 80 pound, fits 2 inch diameter hole. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, W4, 400, W6, W9, A, B, C, H, M, Super C, Super W9, Super A. Replaces 536962R1, 536962R2. (Part No: FAD9273A)
$10.86

Oil Pressure Gauge - Zone Style - with IH Logo with studs - Does not include bracket. For H, Super H, M, Super M, Super MTA, W-4, Super W4, W-6, Super W6, W-9, Super W9 (from 1947). (Part No: R2738)
$39.55

Water Temperature Gauge - For A, B, H, M, W-4, W-6, W-9 all to 1946. Water Temperature Gauge with 19 inch lead, "IHC" Logo. (R3695) (Part No: 63783D)
$45.89

Water Temperature Gauge with IH Logo - TEMPERATURE GAUGE WITH 19 inch LEAD & IH Logo. FITS MODELS A, H, M, Super A, Super M (300, 350 UTILITY). Fitting may require the OEM Adapter 51510D which we do not have available. (Part No: 67135D)
$26.25

Hitch / Drawbar
Drawbar - For tractor models H, Super H. Drawbar. Dimensions: 3/4 inch thick, 50-1/2 inches center to center. (Part No: 357530R1)
$157.55

Drawbar Roller - For tractor models H, Super H, M, Super M, 300, 330. Replace 356563R93 (Part No: R0910)
$51.31

Drawbar Strap - For tractor models H, Super H, M, Super M, 300, 350. (Part No: 45184DA)
$65.77

Fixed Drawbar - For tractor models H (from serial number 36680), Super H. (Part No: R4219)
$393.86

Swinging Drawbar - For tractor models H, Super H. This drawbar is bare steel. The drawbar measures 53-1/4 inches overall length. This drawbar is 3/4 inch thick and 2-1/4 inches wide. There is an oval hole in the end where the pin goes thru like the original straight swinging drawbar. Replaces 49206DA. (Part No: 49206DA)
$142.52

Swinging Drawbar Pin - For tractor models H, Super H, M, Super M, 300, 330, 340, 350, 400, 450, 460, 560, 660. (Part No: FOH450)
$35.98

Hydraulic System
Hydraulic Dipstick - Mounts inside the hydraulic pump breather fill pipe, 11.80 inches long. For tractor models H, HV, M, MV, MD, MDV, Super H, Super HV, Super M, Super MV, Super MD, Super MDV, 140 Combine and 120 Windrower. All equipped with lift all countershaft driven hydraulic pump. (Part No: 15158EX)
$25.13

Hydraulic Pump - Fits H (with F-300 front inner/outer timing cover), Super H, Super W4, 300, 350. 10 GPM @ 1600 RPM, 1200 PSI; dimensions: 3 7/8 inch flange to flange ** Mounting holes 2 5/8 inch center to center lower and 3 1/2 inch center to center upper holes. Replaces: 128191C91, 355515R92, 355515R95, 363779R91, 363779R92, 363779R94. (Part No: 128191C91)
$759.00

Hydraulic Pump Control Rod - This Hydraulic Pump Control Rod is 38 inches long with a 3/8 inch diameter. It is used on the following tractors using belly mounted hydraulic pump: H, HV (Super H, Super HV both up to serial number 19233). This part replaces original part number 15091EX. (Part No: 15091EX)
$34.85

Lights
Headlight Assembly - 12 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5 inches in diameter. Price is for one headlamp assembly. Does not include mounting bracket. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super C, Super H, Super M, Super W4, Super W6, Super A, W4, W6, W9, WD6, WD9. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Part No: 45640DB-12V)
$43.05

Headlight Assembly, Teardrop - 6 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5 inches in diameter. Price is for one headlamp assembly. Does not include mounting bracket. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super C, Super H, Super M, Super W4, Super W6, Super A, W4, W6, W9, WD6, WD9. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Part No: 45640DB)
$44.34

Headlight Lens - Replacement Glass Lens is 4.75 inch outside diameter for IH (45640DB) Headlight Assemblies. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super W4, Super W6, W4, W6, W9, WD6, WD9. (Part No: GC200)
$12.84

Headlight Lens Gasket - Gasket, 4 5/8 outside diameter for lens in sealed beam units 358890R92. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Part No: 358892R91)
$3.56

Headlight Reflector - 4 inch - This headlight reflector repairs OEM " Flatback" type headlights 45640DB and AA3075R. Does not come with bulb. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Part No: S.02377)
$8.64

Headlight Support Bracket - For H, Super H, M, Super M, Super MTA. Headlight Support Bracket. (4156R) (Part No: 51675DC)
$78.70

Headlight Trim Ring - Moulding trim ring for 5 inch teardrop headlights or rear lights on tractors (painted). For tractor models 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, 450, 600, 650, A, AV, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super C, Super H, Super HV, Super M, Super MD, Super MTA, Super WD9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S. (Part No: 53525DA)
$14.25

Knob - Knob for combination rear light and tail light switch (used only with switch body with 15/32 inch shaft). For tractor models 100, 130, 200, 230, 300, 330, 340, 350, 400, 450, 600, 650, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W6, Super WD9, Super A, WR9S. (Part No: 359773R91)
$4.88

Light Clamp - Clamp, lamp assembly for tractors. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super C, Super H, Super M, Super W6, Super A, W4, W6, W9, WD6, WD9. (Part No: 350920R1)
$9.00

Light Switch Knob - Old style for rotary light switches. For tractor models A, AV, B, BN, C, H, HV, M, MD, MV, MDV, W4, W6, W9, WD6, WD9, WR9, WDR9, O4, OS4, I4, I6, I9, ID6, ID9, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super MV, Super MDV, Super MTA, Super W4, Super W6, Super W6TA, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, Cub. (Part No: 57313D)
$10.50

Light Switch, 12 Volt - 4 position with Old style knob, replaces cut out switch when converted to regulator. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5362)
$48.34

Light Switch, 12 Volt - 3 position with Old style knob, with regulator only. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5364)
$47.62

Light Switch, 12 Volt - 4 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5366)
$48.34

Light Switch, 12 Volt - 3 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5368)
$48.34

Light Switch, 6 Volt - 4 position with Old style knob, replaces cut out switch when converted to regulator. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5361)
$48.34

Light Switch, 6 Volt - 3 position with Old style knob, with regulator only. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5363)
$46.73

Light Switch, 6 Volt - 4 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5365)
$48.34

Light Switch, 6 Volt - 3 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5367)
$48.34

Rear Combo Light - 6 Volt Rear Combo Light Assembly with Red Jewel Light with rotary switch. For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. Replaces 355914R91. (Part No: 355911R91)
$63.44

Rotary Light Switch. Early - This 4 position, 6 volt light switch is for models with CUT OUT RELAY, not a voltage regulator. Cut our telays have 2 terminals on one side and 1 terminal on the other. Voltage regulators have 3 terminals on 1 side and 1 terminal on the other. OFF is a position (of the 4). For models A, AV, B, H, M, MV, O4, O6, OS4, OS6, W4, W6, WR9, C, Cub, HV, W9, WD6, WD9. Replaces 57310DX, 57310DY and 1994019. (Part No: 47890DX)
$67.31

Sealed Beam 6 Volt - This sealed beam bulb is 6 volts, fits a 4 5/8 inch outside diameter flatback style light. Bulb measures 4.375 inches outside diameter. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WDR9. Verify dimensions. (Part No: 358890R92-6V)
$36.75

Sealed Beam Assembly - 6 Volt For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230, 240. (Part No: R2714)
$52.03

Sealed Beam Bulb 12 Volt - Light, 12 volt sealed beam unit. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WDR6, WDR9 (Part No: 358890R92-12V)
$35.89

Sealed Beam Bulb, Red & White - 4.5 inch diameter. For tractor models Cub, Cub Lo-Boy, A, Super A, C, Super C, H, Super H, M, Super M, 100, 130, 200, 230, 300, 330, 340, 350, 400, 450. (Part No: 371461R92)
$20.23

Switch, Worklight, with Knob - For tractor models Cub, Cub Lo-Boy, A, Super A, C, Super C, H, Super H, M, Super M, 100, 130, 200, 230, 300, 330, 340, 350, 400, 450. Replaces 359682R91. (Part No: 375653R92)
$14.67

Tail Light Lens - 5 inch lens, combination rear light and tail light. For 100, 130, 200, 230, 300, 340, 350, A, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super M, Super MTA, Super W4, Super W6, Super WD6, Super A. (Part No: 350478R1)
$12.46

Oil System
Oil Filler Cap - For tractor models 300, 350, 400, 450, H, HV, M, MD, MDV, MV, Super H, Super HV, Super M, Super MTA. (Part No: 4819DX)
$8.55

Oil Filter - Oil filter element, cartridge type with gasket. For gas engines: C113, C152, C248, C264, C281, Element is 3 7/16 inches in diameter and 7 1/2 inch overall length. Replaces: 355010R91, 360431R91, 376375R91, 63858D (Part No: 376375R91)
$9.78

Oil Filter - Oil filter element, cartridge type with gasket. Filter is 3.5 inches diameter with overall length of 5.5 inches. For gas engines: C113, C123, C135, C146, C152, C164, C169, C175. For 100, 130, 140, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 350, 404, 424, 444, 504, A, AV, B, BN, C, H, HV, Super AV, Super C, Super H, Super HV, Super W4, Super A, W4. (Part No: 376374R91)
$7.04

Oil Level Petcock - This oil level indicator system uses 2 petcock valves. Used on models A, AV, BN, C, F12, F14, F20, F30, H, HV, M, MTA, MV, Regular, Super A, Super AV, Super C, Super H, Super M, Super MV, 300, 400, Super MTA, Super W4, Super W6 and some other early IH and McCormick Deering models. (Part No: 1998TA)
$14.33

Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Order EBU6734A if washer is needed. Replaces: 688067C1, 359875R1. (Part No: C5NE6730B)
$8.25

Oil Pan Drain Plug Washer - This washer is used with C5NE6730B 7/8 inch Oil Drain Plug. (Part No: EBU6734A)
$1.25

PTO / Driveline
PTO Safety Shield - For H after serial number 118000, HV, Super H, Super HV. PTO Safety Shield. (Part No: 66387DAXA)
$69.69

PTO Seal - Measures 1.306 inch inside diameter, 2.220 inch outside diameter. THIS SEAL IS .312 INCHES WIDE. VERIFY THE WIDTH OF YOUR OLD SEAL. YOU NEED TO INSTALL 2 OF THESE IF YOUR OLD SEAL IS WIDER. For tractor models Super A, H after serial number 118000, (M, MD, Super M, Super MTA and Super MD after serial number 59957), Late W4, W6, W9, Super W4, Super W6, Super W9, B250, B275, B414; Also fits the following models with transmission driven PTO (not Live PTO): MTA, 300, 330, 350, 354, 364, 384, 400, 424, 434, 444, 450, 454, 544, 600, 650, 2300, 3414, 3514, 3616. Replaces 3065217R91, 358772R91, 358812R91, 50702D, 372394R91, S90957, 708107R91. (Part No: 45702D)
$7.77

PTO Shaft Guard with Clamp - For A, B, Super A, Super AV, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, 100, 130, 140, 200, 230, 240, 504, 544, 606 and with transmission driven type tractors: 330, 330, 350, 400, 450. PTO safety guard. (Part No: 51484DX)
$13.97

Seats
Pan Seat 4-Bolt Mount - Pan Seat with silver padded canvas. Center brass drain hole over metal pan seat frame. For: C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 3 50, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: R0906)
$168.93

Pan Seat 4-Bolt Mount - Pan Seat with a red and white vinyl cover. For C, Super C, Super H, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: 357518R91)
$141.67

Pan Seat 4-Bolt Mount - Black vinyl padded cushion with steel pan seat. For C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: R0903)
$137.93

Pan Seat 4-Bolt Mount - Silver canvas cushion with steel pan seat. For C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: R1113)
$145.52

Pan Seat 4-Bolt Mount with Brass Drain Hole - Red and white vinyl with brass drain hole with 4 bolts. For C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. Replaces 357518R91. (Part No: R0905)
$160.01

Pan Seat with Slide on Seat Bottom - RED AND WHITE Vinyl Pan Seat with flip over seat with slotted slide on seat bottom. For Early Models H, M. (Part No: 49498DD)
$220.79

Pan Seat with Slide on Seat Bottom - Silver Vinyl Pan Seat with flip over seat with slotted slide on seat bottom. For Early Models H, M. (Part No: 49498DD_SILVER)
$170.60

Seat Hinge Pin - Pin, hinge for tilt back seat bracket. Pin is 7 inches long and 3/8 inch diameter. Tractors: C, Super C, H & HV, Super H & HV~ M & MD, Super M & MTA~ Super W6 & W6TA~ 200, 230, 300, 340, 350, 400, 450, 560, 660. For 200, 230, 300, 340, 350, 400, 450, 460, 560, 660, C, H, HV, M, MD, MTA, Super C, Super H, Super HV, Super M, Super MD, Super W6, W6TA. OTHER PARTS IN PICTURE SHOWN FOR REFERENCE ONLY. Replaces: Washer: 228280, Pin: 356892R2, Clip: 356893R2 (Part No: 356892R2)
$10.88

Seat Shock, Mid Mount - With one bolt hole and one stud 7 1/4 inch when compressed. For H (from serial number 281556), M (from serial number 165271), Super M, Super MTA with mid mounted shock. Replaces R3702, IHS465. (Part No: 353204R93)
$41.85

Seat Shocks - Rear Mount - For H and HV with serial number 15698 to 281555; M, MD, MDV, Super MD and Super MDV with serial number 9287 to 165270. Rear Mount Seat Shocks are 11 1/2 inch center to center compressed length. Replaces IHS329. (Part No: 352587R92)
$33.00

Seat Spring - Cone Shape SPRING Measures 13 inches tall and 8.5 inches at base. For tractor models 200, 230, 300, 350, 400, 450, 460, 560, 600, 650, 660, C, H, HV, M, MD, MTA, Super C, Super H, Super M, Super MTA. Replaces IHS030. (Part No: 354670R2)
$31.98

Seat Support Assembly - This Seat Support Assembly fits H, HV (sn 501 - 15697) M, MD, MDV (sn 501 - 9286), MV; Replaces: 51287DX, 51288DX, 51290DX, 51364D, 52436D (Part No: IHS1490)
$220.80

Seat Support Pivot Rod - Rod that fits in the end of the Seat Support. OTHER PARTS IN PICTURE SHOWN FOR REFERENCE ONLY. (Part No: 352648R1)
$25.88

Sheet Metal / Body Parts
Battery Box - For H, Super H, HV, W4. Battery Box with Cover. Replaces OEM# 51686DBX. Outside dimensions: 9 3/8 inches in length, 7 11/16 inches wide, 9 inches tall. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 51680DB)
$68.93

Battery Box Lid - For H, Super H, HV, W4. Battery Box Cover. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 51686DBX)
$41.48

Battery Hold Down Rubber - 3/4 inches tall, inserts into the retainers in the battery box lid. For tractor models Cub, Cub Lo-Boy, A, AV, B, (BN, C 51690D), AI, H, HV, M, MV, MD, MDV, W6, W9, WD6, Super A, Super C, Super H, Super HV, Super M, Super MTA, Super W6, 100, 130, 140, 200, 230, 600, 650. Replaces: 51690D. (Part No: R5103)
$4.50

Fender - For Farmall H, Super H, M, Super M, Super MTA & 300, 350, 400, 450. This fender fits either left or right side. You must order two for a complete set. Additional $20.00 shipping due to weight. Mounting Plate and Spacer sold seperately. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 51500DB)
$132.48

Fender Extension Mounting Kit - One kit used per tractor. For tractor models H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDTA, O4, Super W4, W6, WD6, Super W6, Super W6TA, W9, WD9, Super WD9, 100, 130, 140, 400, 230, 240, 300, 330, 340, 350, 400, 450. Fender mounting Kit includes 2 fender flat brackets with (34 Pieces) all mounting hardware. ADD $5.00 to shipping costs due to weight. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. Replaces IHS364. (Part No: 8000072)
$58.65

Fender Mounting Plate - For Farmall H, Super H, M, Super M, For Farmall H, Super H, M, Super M, Super MTA & 300, 350, 400, 450. This fender mounting plate fits either left or right side. You must order two for a complete set/1 tractor. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 51500PL)
$25.08

Fender Mounting Spacers - For Farmall H, Super H, M, Super M, For Farmall H, Super H, M, Super M, Super MTA & 300, 350, 400, 450. This fender mounting spacer fits either left or right side. Price is for each, Min order QTY is 4. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 51502D)
$3.20

Grill Screen - Original 3/16 inch wire mesh sheet. Each 24 inch x 36 inch, sheet is made of original thickness wire and includes clips. Cut sheet to appropriate grill screen size for your tractor. For Farmall models A thru 450. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: R4476)
$36.25

Grill Screen Insert - This complete grill and screen for tractor models H, Super H, HV, Super HV. (Part No: 48963DXA)
$39

Toolbox - Light bar mount, includes decals and brackets. For tractor models H, M, MD, MTA, Super H, Super M, Super MD, Super MTA (Part No: 999760R91)
$103.43

Steering
Axle - Heavy duty main axle assembly includes bushings. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. Additonal $45 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 7453)
$604.52

Axle Extension Tube, Heavy Duty - For Schwartz aftermarket front end. 11-5/8 inch vertical shaft tube. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Part No: 7465)
$205.70

Axle Extension Tube, Heavy Duty - For Schwartz aftermarket front end. 9-5/8 inch vertical shaft tube. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Part No: 7470)
$203.70

Front Axle Assembly, Wide, without hubs - For H, Super H, 300, 350. Complete Front Axle without hubs contains cap screws with lock washer, steering bracket assembly, rear saddle assembly, front saddle assembly, spindles and Castlellated nuts. Width on wide axles are adjustable from 60 inches to 86 inches. ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** (Part No: 21015)
$1972.10

Oil Seal - Oil seal for bearing kit FW113FS. Tractors H, Super H, M & MD, 4, Super W4, 300, 350. For 2606, 300, 350, 4, 460, 504, 606, H, M, MD, Super H, Super M, Super MD, Super W4 (Part No: 48539DA)
$11.38

Spindle Bushing - Fits 1.667 inch diameter spindles replaces 376099R1. For use with A-71785HD and OEM spindle. **Minimum order quantity is 2, price is for each. (Part No: 358958R2)
$7.71

Spindle-LH - Fits tractor models H, HV, Super H, Super HV, 300, 350 (Does NOT fit Utility Models). (Part No: 360419R91)
$210.89

Spindle-RH - Fits tractor models H, HV, Super H, Super HV, 300, 350 (Does NOT fit Utility Models). (Part No: 360420R91)
$210.89

Steering Shaft - For H, HV, Super H, Super HV, Farmall 300, 350. Overall length 43 inches, 3/4 inch shaft, threaded end 3/4 inch UNF. (Part No: 50047DB)
$129.72

Steering Wheel - 16 inch diameter, 3/4 inch keyed hub, 3 covered spokes. For tractor models (F12, F14, F20, F30, A, B, H, M all early from 1937-1940). (Part No: 29118DC)
$62.44

Steering Wheel - 17-5/8 inch diameter, 3/4 inch hub, for keyed shaft. 3 Spoke. Super A serial number 356000 and up, C, Super C, H, Super H, M, Super M, MD, W4, Super W4, W6, Super W6, W9, 100, 130, 200, 230, 240 and 300, 350, 400, 450 without Power Steering. Metal Spokes. Replaces IHS328. (Part No: 60070D-OE)
$30.75

Steering Wheel Nut - This steering wheel nut fits the following tractor models: Cub Cadet 100, Cub Cadet 102, Cub Cadet 122, Cub Cadet 70, A, AV, AV1, B, BN, C, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MDVTA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, Super WD6, Super WD6TA, Super WD9, Super WDR9, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S, 100, 130, 200, 230, 600, 650, Cub Lo-Boy, 300, 400, 450, and Cub. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 114499, 122403, and 219753. (Part No: 353435X1)
$0.44

Steering Worm Bearing Retainer - This Worm Bearing Retainer is 2.1875 inches in diameter and has 12 right hand threads. For models 2404, 2424, 2444, 2504, A, AV, B, BN, C, H, HV, M, MD, MDV, MV, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, 404, 424, 444, 450, 504. (Part No: 6660DA)
$22.50

Steering Worm Gear - For H, HV, Super H, Super HV, Farmall 300, 350. This 32 teeth gear mates with the bottom of the steering shaft. Can use 50038DA with 19 teeth also. (Part No: 50038DB)
$149.41

Steering Worm Shaft Bearing - This Steering Worm Shaft Bearing has a 0.984 inch inside diameter, a 2.047 inch outside diameter and a 0.590 inch width. Fits B, BM, BN, C, H, HV, M, MD, MDV, MTA, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDV-TA, Super MTA, Super MV, Super MVTA, 200, 230, 400, 450, Super MTA, (424, 444 used as a steering worm shaft bearing; without power steering), 240, 300, 340, 350, 404, 504, 240, 404. Replaces: 1271857C91, 1273146C91, 210041, 43357D, 69696D, 741-0360, 741-3037, 941-3037, ST225, ST225AT, ST225B, ST225BT, ST225Y, ST678. (Part No: ST225B)
$6.75

Steering Worm Shaft Oil Seal - This Steering Worm Shaft Oil Seal measures 1.000 inch inside diameter, 1.503 inch outside diameter, 0.250 inch wide. Fits B, BN, C, H, HV, M, MD, MDV, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MDV-TA, Super MV, Super MVTA, 200, 230, 240, 400, 450, MTA diesel, 300, 340, 350. Replaces: 359042R91, 359257R91, 364468R91, 43800D, 43800DA, 488561R91. (Part No: 43800D)
$7.95

Thrust Bearing - For tractor models 684, 685, 685XL, 686, 695, 695XL, 706, 756, 766, 782, 784, 786, 806, 826, 856, 86 SERIES with AXLE PIVOT BALL, NOT PIN), 88 SERIES EARLY with AXLE PIVOT BALL, NOT PIN), 884, 885, 885XL, 886, 895, 895XL, 966, 986, H, HV, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86, M, MTA, Super H, Super HV, Super M. (Part No: 185106C1)
$9.53

Thrust Bearing, Axle - Standard duty. Fits Schwartz/Speeco type front ends. For tractor models 300, 350, (354, 364 last serial number models), 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, (B414 last serial number models), H, M, MTA, Super H, Super M. Replaces OEM number 392671M91. Also replaces SCHWARTZ part number 60351. (Part No: T163)
$14.55

Tie Rod - Long notched With seal and stud nut for Swartz front end. 18 inches long from center of ball joint to end of shaft. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H. (Part No: 22513)
$62.04

Tie Rod Tube Kit - For a Swartz front end. Kit includes, 1 tie rod tube, 1 plug, 1 ball stud, 2 1/8 inch cotter pins, 1 dust seal. For tractor models 300, 350, 400, 450, 460, 504, 544, 560, 656, 700, 706, 730, 756, 800, 806, 830, 856, 930, H, M, MTA, Super H, Super M. (Part No: 22812)
$57.09

Upper Front Bolster Pivot Shaft - For H serial number 167994 and up, Super H, 300, 350. Upper Front Bolster Pivot Shaft. (Part No: 69060D)
$143.22

Wheels
Bearing Cone - Inner cone for bearing kit FW113FS. Tractors H, Super H, M & MD, 4, Super W4, 300, 350. For 300, 350, 4, H, M, MD, Super H, Super M, Super MD, Super W4 (Part No: ST2049)
$9.42

Bearing Cup - Inner cup for bearing kit FW113FS. Tractors H, Super H, M & MD, 4, Super W4, 300, 350. For 300, 350, 4, H, M, MD, Super H, Super M, Super MD, Super W4 (Part No: ST974)
$6.27

Clamp Lock Nut - Wheel Clamp Lock Nut. 7/8-14 thread. Fits front wheel on tractors: H, Super H~ M, Super M~ B275, 300, 350, 400, 450, 460, 560. For 300, 350, 400, 450, 460, 560, B275, H, M, Super H, Super M (Part No: LN10-5)
$14.23

Front Rim - Front Rim - Models H and M With Adjustable Tread Wheels - Blank front rim with 3 Loops (no center). 4-1-4 x 16. For tractor models H and M. Additional $10.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R4179)
$170.59

Front Rim, No Loops - Blank front rim (no center). 4-1/4 x 16, no loops. For tractor models: H, I4, I6, ID6, M, MD, O4, O6, W4, W6, WD6. Replaces: 354244R91, 354223R1. (Part No: R2056)
$61.51

Rear Wheel Clamp - This rear wheel clamp is for 2 1/2 inch diameter axles. NOT FOR STEEL WHEEL OR CUT DOWN WHEEL APPLICATIONS. Fits cast wheel center part number 6194D. It is for tractor models H, HV, Super H, Super HV, 300 early, for all 6194D rear wheel. (Part No: 6192DBX)
$68.31

Wheel Bearing Kit, Wide Axle Assembly - For tractor models H, HV, M, MD, MF, SMD, Super H, Super HV, SW, W4, 300, 350, 330. This is a complete front axle kit for one wheel used on wide axle assembly (only). Contains: 14138A (Cone), 14274 (Cup), 1779 (Cone), 43828D (Gasket), 704083R1 (Seal), 48548D (Seal Retainer), 1729 (Cup). Inner bearing inside diameter is 1.37 inch, outside diameter 2.71 inch. Outer bearing inside diameter is 0.93 inch, outside diameter 2.23 inch, seal inside diameter is 1.74 inch, outside diameter 2.83 inch. (Part No: WBKIH4)
$32.78



Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Part No: MIS3127)
$239.98

Brakes
Brake Rivet Tool - Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1/4 inch throat, 1/8 inch diameter rivet punch. (Part No: RIVET_TOOL)
$33.95

Brake Rivet Tool, Large - Larger version of our Brake rivet tool. 3-3/8 inch deep throat x 2-1/8 inch high throat. Includes 1 punch for brake shoe rivets and 1 punch for clutch pulley brake. (Part No: LGRIVET)
$95.23

Cooling System
Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250F (121C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Part No: MBH1153)
$60.71

Radiator Drain Tap - This drain tap fits various tractor models as a radiator, engine block, and hydraulic drain tap. This is 1/4 inch NPT 18 thread. Please verify size and thread count before ordering. Replaces: 103647, 144569, 1960767C1, 217-92, 31-157, 31-159, 31419, 371602A1, 4029/09055, 534184R1, 539787R1, 614201R1, 9671406, 47050674, 86625234, H434809. (Part No: C9NN8115A)
$3.49

Zip Leak - Industrial Radiator Stop Leak - A professional strength stop leak for tractors, trucks and construction equipment. Designed for large, heavy duty cooling systems. 5 oz. Bottle. Instructions/Usage: For average antique tractors (120-160 CID engines) use 1/4 bottle for 15 minutes, if the leak fails to stop, add an additional table spoon. (Part No: Z14012)
$10.49

Decals and Emblems
Decal, Fear This IH - Black and red, 12-1/2 x 3-3/4. For all Models. (Part No: S.67826)
$14.10

Decal, IH Block - "IH" logo, 11 inches. (Part No: R4682)
$22.79

Decal, IH Block - "IH", 3 inch x 3 1/4 inch Block. (Part No: R4681)
$8.15

Decal, IH Block - "IH" logo, 1 3/4 inch. (Part No: R4680)
$6.51

Decal, IH Block - "IH", 1 1/4 inch Logo . (Part No: R4679)
$4.89

Decal, IH Block - "IH" logo, 7 inches printed on vinyl. (Part No: R5171)
$27.83

Decal, IH Block - "IH" logo, 8 inches printed on vinyl. (Part No: R5172)
$25.52

Decal, IH Block - "IH" logo, 10 inches. (Part No: R5173)
$29.33

Decal, IH Block - "IH" logo no background, 1 inch printed on vinyl. (Part No: R5174)
$3.26

Decal, IH Block - "IH" logo no background, 1-5/8 inches printed on vinyl. (Part No: R5175)
$4.89

Decal, IH Block - "IH" logo no background, 2 inches x 2-1/2 inch printed on vinyl. (Part No: R5176)
$6.51

Decal, IH Block - "IH" logo no background, 3 inch x 3-1/2 inch printed on vinyl. (Part No: R5177)
$16.28

Decal, IH Block - "IH" logo no background, 4-1/2 inch x 4-3/4 inch printed on vinyl. (Part No: R5178)
$9.77

Decal, IH Block - "IH" logo no background, 5-1/2" x 6" printed on vinyl. (Part No: R5179)
$9.77

Decal, IH Block - "IH" logo no background, 6-1/2 inch x 7 inch. (Part No: R5180)
$16.28

Decal, IH Block - "IH" logo no background, 7-1/2 inch x 8 inch. (Part No: R5181)
$19.53

Decal, IH Block - "IH" logo on silver background, 2 inch x 2-1/4 inch. (Part No: R5182)
$6.51

Decal, IH Block - "IH" logo no background, 10 inch x 11 inch. (Part No: R5183)
$21.65

International Decal - 8-1/2 inch long, white with black outline. (Part No: R0679)
$9.77

International Decal - 23 inches long, black block letters. (Part No: R0680)
$16.28

International Decal - 23 inches long, white with black outline. (Part No: R0681)
$19.53

International Decal - 26 inches long, black block letters. (Part No: R0682)
$19.53

International Decal - 26 inches long, white with black outline. (Part No: R0683)
$21.65

International Decal - 29 inches long, black block letters. (Part No: R0684)
$21.65

International Decal - 29 inches long, white with black outline. (Part No: R0685)
$24.74

Drive Train
Lucas Hub Oil (quart) - Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Part No: LU10088)
$10.13

Electrical System
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. NOTE

Alternator Base Bracket Kit - Universal - Universal Base Bracket Mounting Kit. For converting from a generator to an alternator. Contains: brackets, bolts, washers, nuts and basic instructions. (Part No: 2348258)
$34.20

Alternator Top Adjusting Bracket, Universal - This Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Part No: 8NL10302)
$11.93

Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 8NE10305SE)
$68.93

Battery Hold Down - Universal hold down for batteries that measure 8 15/16 inches long and 6 13/16 inches wide. (Part No: NCA10718A)
$15.81

Battery Hold Down - Universal Battery Hold down. Verify your battery measurements. This will fit a 9 3/16 inches long and 7 3/16 inch wide battery. (Part No: 1111-0147)
$13.43

Battery Hold Down Bolts - Pair - These "J" bolts measure 10 1/2 inches long and are universal for many batteries. Verify length. Price is for a pair. (Part No: 393161R1)
$8.62

Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Part No: BTW28)
$35.98

Battery Thermal Wrap - 80 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW36)
$37.48

Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW72)
$53.81

Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Part No: 28010)
$28.38

Coil Bracket - Universal Coil Bracket (Part No: R1940)
$3.50

Coil, High Performance (Black), 12 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40611)
$45.15

Coil, High Performance (Black), 12 Volt, Oil Filled - Pertronix Flame Thrower heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40511)
$35.82

Coil, High Performance (Black), 6 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40111)
$44.33

Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. (Part No: 40011)
$35.18

Coil, High Performance (Chrome), 12 Volt, Oil Filled - 12-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40501)
$40.25

Coil, High Performance (Chrome), 6 Volt, Oil Filled - 6-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40001)
$39.53

Coil, Ultra High Performance (Black), Oil Filled - Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45011)
$39.44

Coil, Ultra High Performance (Chrome), Oil Filled - Pertronix Flame Thrower II Chrome, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system using "Ignitor II". Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45001)
$43.58

Coil-Universal 12V - Universal coil fits many models. This Coil comes with an external resistor which can be removed if you need a coil with no resistance. Also comes with a mounting bracket. Coil is designed to be used on a 12 volt tractor system with the resistor or 6 volt without resistor. Replaces: 396547R91 (Part No: D5TE12029AB)
$7.13

Distributor Cap, WICO - For All Models with WICO distributor having clip type cap with 3 3/8 inside diameter seat. (Part No: X30042)
$44.75

Magneto Winding J4 - For tractors using a J-4 Magneto. (Part No: 352355R91)
$68.92

Magneto, Wico XH & XHD, Service & Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Part No: MAG6)
$14.25

Spark Plug - Extended tip, 14mm thread, 3/4 inch reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65)
$2.73

Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85)
$2.73

Spark Plug - Standard tip, 7/8 inch-18 thread, 5/8 inch reach. Replaces Champion W10, W14, W18. NOTE: Verify spark plug type before ordering. (Part No: AL3076)
$4.63

Spark Plug Wire Set, 4 Cylinder, Univeral - Universal Spark Plug Wire Set, 4 Cylinder, straight boot, cut to length (Part No: S2097)
$12.75

Spark Plug Wire Set, 4 Cylinder, Universal - For use with high performance electronic ignition conversion kits. Kit has 90 degree sparkplug boots and straight distributor boots. (Part No: S.66442)
$12.59

Spark Plug Wire Set, Universal - 6 Cyl. - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260)
$15.00

Spark Plug Wire Set, Universal, 4 Cyl. - Universal Spark Plug Wire Set, 4 Price: 13.59 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. Made in the USA. (Part No: CPN12259)
$11.24

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it! (Part No: STARTER)
$0.00

Starter Solenoid - This is a 3 post, 12 volt starter solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic. (Part No: DR1467)
$7.13

Starter, Generator Tag, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO12)
$14.31

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO6)
$14.31

Stripper and Crimping Tool - Professional Fast and Easy tool for stripping and crimping electrical wires. (Part No: B1SB6718)
$21.20

Voltage Regulator, 12 Volt - 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957. (Part No: 182548M92)
$16.88

Engine Gaskets
Silicone Black RTV - Permatex black RTV silicone adhesive sealant. Provides a waterproof seal around metal, glass, rubber. Designed for indoor or outdoor use, 3 oz. tube. (Part No: PRM16BR)
$5.43

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 F to +500 F, 3.35 oz. tube. (Part No: PRM77BR)
$6.29

Silicone Copper RTV - Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicone. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75 F to +700 F, 3 oz. tube. (Part No: PRM101BR)
$10.47

Engine Rebuild Kits
Lucas Assembly Lube - Lucas Assembly Lube (4 oz). Designed to be used as an initial lubricant to metal surfaces. It mixes with any oil and will not plug filters. This product clings to all surfaces and is an excellent rust inhibitor, allowing long term storage for all parts. It’s useful wherever tension or torque is applied. Key Benefits are: Use to pre lube camshaft, bearings, lifters and valve train. Prevents seizing, galling and scuffing perfect for engine lding, super slick and tacky, easy to use, excellent rust inhibitor, excellent for long term storage, contains Zinc, Moly and other extreme pressure additives for maximum protection during engine break-in. (Part No: 10152)
$4.65

Engine Parts
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). NOTE

Engine Pistons and Sleeves
Piston Groove Cleaner - For pistons up to 5 1/2 inches. Cleans grooves of 5/64, 3/32, 1/8, 5/32 and 3/16. (Part No: B1SB9055)
$31.79

Engine Rings
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32"). NOTE

Exhaust System
Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89020C)
$78.88

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89025C)
$92.67

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 2.75 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89027C)
$99.58

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89051C)
$120.24

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with Extended Curve. This is a universal part. Verify Measurements (Part No: 146520CHR)
$112.10

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89054C)
$115.52

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.75 inch inside diameter inlet. It is 4 inches outside diameter beyond the inlet. This is a good Chrome Stack For IH Applications With 400 Series Diesel Engines & 3 3/4" OD Manifold Outlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89375C)
$144.46

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify Measurements before ordering. (Part No: 146490CHR)
$131.51

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89057C)
$131.49

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89485C)
$159.35

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: L102236CHR)
$84.28

Muffler Clamp, 1-1/2 - New Clamp for 1-1/2 inch outside diameter muffler inlet. (Part No: MC112)
$2.75

Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Part No: MC114)
$2.50

Muffler Clamp, 1-1/8 - New Clamp for 1-1/8 inch outside diameter muffler inlet. (Part No: MC118)
$2.50

Muffler Clamp, 1-1/8 - New Clamp for 1-1/8 inch outside diameter muffler inlet. (Part No: MC118)
$2.50

Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Part No: MC134)
$2.75

Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Part No: MC138)
$2.50

Muffler Clamp, 1-5/8 - New Clamp for 1-5/8 inch outside diameter muffler inlet. (Part No: MC158)
$2.75

Muffler Clamp, 1-7/8 - New Clamp for 1-7/8 inch outside diameter muffler inlet. (Part No: MC178)
$2.75

Muffler Clamp, 2 - New Clamp for 2 inch outside diameter muffler inlet. (Part No: MC200)
$2.75

Muffler Clamp, 2-1/2 - New Clamp for 2-1/2 inch outside diameter muffler inlet. (Part No: MC212)
$3.15

Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Part No: MC214)
$3.15

Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Part No: MC234)
$4.50

Muffler Clamp, 2-3/8 - New Clamp for 2-3/8 inch outside diameter muffler inlet. (Part No: MC238)
$4.50

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Part No: MC300)
$4.50

Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Part No: MC312)
$4.75

Muffler Clamp, 3-1/4 - New Clamp for 3-1/4 inch outside diameter muffler inlet. (Part No: MC314)
$6.50

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Part No: MC400)
$7.50

Muffler Clamp, 4-1/2 - New Clamp for 4-1/2 inch outside diameter muffler inlet. (Part No: MC412)
$7.98

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Part No: MC500)
$7.98

Rain Cap - This rain cap is for a 1.50 inch pipe. (Part No: R1798)
$5.24

Rain Cap - This rain cap is for a 1.750 inch pipe. (Part No: R1799)
$5.33

Rain Cap - This rain cap is for a 2.0 inch pipe. (Part No: R1800)
$6.51

Rain Cap - This rain cap is for a 2.25 inch pipe. (Part No: R1801)
$7.23

Rain Cap - This rain cap is for a 2.50 inch pipe. (Part No: R1802)
$6.38

Rain Cap - This rain cap is for a 2.750 inch pipe. (Part No: R1804)
$10.61

Rain Cap - This rain cap is for a 3.0 inch pipe. (Part No: R1805)
$5.99

Rain Cap - This rain cap is for a 3.50 inch pipe. (Part No: R1806)
$11.99

Rain Cap - This rain cap is for a 4.0 inch pipe. (Part No: R1807)
$9.80

Stainless Steel Clamp, 2 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90869A)
$5.22

Stainless Steel Clamp, 2.5 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90871A)
$5.54

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90872A)
$5.94

Stainless Steel Clamp, 3 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90873A)
$5.57

Stainless Steel Clamp, 3.5 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90874A)
$5.81

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90875A)
$6.09

Fuel System / Air Intake
Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Part No: S.43231)
$9.90

Choke Cable - Universal choke cable 72 inch long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: CC72)
$11.58

Fuel Filter, In-Line, 1/4 inch - Inlet 1/4 inch, outlet 1/4 inch, outside diameter 1-29/32 inches, length 4-1/16 inches. (Part No: 6511393)
$5.19

Fuel Filter, In-Line, 3/8 inch - Inlet 3/8 inch, outlet 3/8 inch, outside diameter 1-29/32 inches, length 3-7/8 inches. (Part No: BF836)
$4.04

Fuel Filter, In-Line, 5/16 inch - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 1-29/32 inches, length 4-5/32 inches. (Part No: BF840)
$4.14

Fuel Filter, In-Line, 5/16 inch, Clear - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 2-1/8 inches, length 3-21/32 inches. (Part No: BF7736)
$2.36

Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043)
$24.20

Fuel Tank Liner Kit - Works on all metal gas tanks, use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259)
$50.78

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Part No: R7949)
$9.00

Fuel Tank Webbing, 3 Ft - Black woven nylon type material, .042 inches thick, 3 foot section. (Part No: FTW494)
$4.13

Lucas Fuel Treatment (quart) - Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Part No: LU10003)
$12.80

Main Fuel Valve - This main fuel valve replaces the original fuel solenoid for International carburetors. The original fuel solenoids are very unreliable and can easily be replaced with this manual valve. This assembly contains: the valve, graphite packing, and packing nut. This will not fit Marvel-Schebler carburetors. If you need one for a Marvel-Schebler, please call 800-853-2651 to check availability and pricing. (Part No: 47404DASSY)
$22.50

Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Part No: C1778R)
$1.20

Stop Cable - This red knobbed Pull to Stop cable can be used as a stop cable, choke cable or any other functioning cable up to 72 inches in length. It does have a red pull knob that reads, "Pull to Stop". It has a usable cable length of 72 inches. (Part No: PTSTOP)
$7.79

Gaskets
Gasket Material, Cork Rubber - 3/32 inch thick x 12 inches wide x 24 inches long. For making general purpose gaskets. (Part No: GSKCR332)
$10.84

Gasket Material, Cork Rubber - 1/16 inch thick x 12 inches wide x 24 inches long. For making general purpose gaskets. (Part No: GSKCR116)
$13.81

Gasket Material, Exhaust Manifold - 1/16 inch thick x 12 inches wide x 28-1/2 inches long. Perforated steel core to make manifold gaskets. (Part No: GSKEM1228)
$17.72

Gasket Paper, .0160 - .0160 inch x 18 inches x 98 inches long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1844)
$15.79

Gasket Paper, .0275 - .0275 inch thick x 18 inches wide x 98 inches long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1898)
$22.72

Temperature Gauge, Universal - Heat indicator for 2 inch hole. Complete assembly with bracket and adaptors. Numeric Face. Install in block, head or hose. Dial calibrated to 250 degrees. 70 inch metal wrapped capillary line. (Part No: UTG25)
$22.02

Gauges
Ammeter Gauge - 60-0-60, 12 volt, 2 inch body diameter. Not illuminated. (Part No: AMG60)
$2.99

Amp Gauge - This amp gauge comes with the "IH" logo printed on the face. It has a black face, chrome bezel, and reads 60-0-60. (Part No: IHS1837)
$27.90

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Part No: HM771)
$46.42

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672)
$38.40

Oil Gauge - For all IHC and Farmall tractors up to 1946. Oil Pressure Gauge with color read (no numbers on face). IHC logo on face. Screws directly into block. (Part No: 43987DB)
$44.25

Oil Gauge - For IHC and Farmall tractors 1947 and and up. Oil Pressure Gauge with color band - Includes mounting bracket. Has IH logo on face. (Part No: 41934DB)
$64.35

Oil Gauge Copper Line Kit - Universal, for tractors using 1/8 inch x 6 foot copper oil line. Includes 6 foot 1/8 inch line, 2 inch x 5/16 inch-24 UNF nuts, 2 compression sleeves, and a 1/8 inch-27 NPTF female to 5/16 inch-24 UNF male adapter. (Part No: UNI523)
$25.20

Oil Gauge Valve - Oil level indicator (petcock). For all tractors with a 3/8" thread. Oil Gauge Valve for oil pan. (Part No: 1998TAOE)
$14.33

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Part No: 919095)
$13.27

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/4 inch tube. Brass. (Part No: IHS626)
$12.72

Oil Pressure Gauge - Universal Complete assembly with oil tube and mounting hardware. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Part No: SSW0002)
$8.62

Temperature Gauge - Universal water temperature gauge (0-280 degree scale). Fits tractor model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1/2 inch or 3/4 inch male adapter, engine block or radiator threaded hole. (Part No: 1042944)
$23.78

Temperature Gauge, Universal - For 2 inch mounting hole. Complete assembly with bracket and adapters for block. Fitting for lead is 3/8 inch NPT and 1/2 inch NPT adapter. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77 inch capillary line. Fits all liquid cooled engines. (Part No: UTG50)
$16.20

Hitch / Drawbar
Center tube, Stablizer - Center tube for SK102CH stabilizer kit. (Part No: SK102CH-CT)
$13.66

Conversion Tong - Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. Add $5.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FH1447)
$177.50

Conversion Tong - Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. Add $5.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FH1448)
$177.50

Conversion Tong - Two Point Conversion Tong bent type, and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. Add $5.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FH14416)
$187.57

Conversion Tong - Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. Add $5.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FH14417)
$187.57

HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four(4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four(4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three(3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Part No: HPA15X)
$5.99

HITCH BALL 10000LB 2-5/16 - 2-5/16 inch BALL SIZE, 1-1/4 inch STUD THREAD, 2-1/2 inch STUD LENGTH, 10, 000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516114)
$23.85

HITCH BALL 15000LB 2-5/16 - 2-5/16 inch BALL SIZE, 1-3/8 inch STUD THREAD, 2-5/8 inch STUD LENGTH, 15, 000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516138_)
$25.04

HITCH BALL 2000LB - 1-7/8 BALL SIZE, 3/4 STUD THREAD, 1-3/4 STUD LENGTH, 2000 LB MAX LOAD CAPACIRY, ONE CHROME HITCH BALL CLASS. (Part No: CHB17834)
$9.23

HITCH BALL 3500LB - Hitch ball. 2 inch ball size, 3/4 inch stud thread, 1-7/8 inch stud length, 3500 lb. max load capacity, one/two chrome hitch ball class. (Part No: CHB234)
$9.48

HITCH BALL 5000LB - Hitch ball. 2 inch ball size, 1 inch stud thread, 2-1/8 inch stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21)
$10.83

HITCH BALL 5000LB 2-5/16 - Hitch Ball, 2-5/16 inch ball size, 1 inch stud thread, 2 inch stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161)
$15.39

Hair Pin Cotter Assortment - Hair Clips sizes from 1/16 x 1 3/8 to 3/16 x 3 1/4. Total of 141 pieces in 6 sizes. (Part No: B1SB16)
$29.19

LINCH PIN - Package of 10 linch pins. Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP14)
$3.45

LINCH PIN, 10 Pack - Package of 10 linch pins. Pin diameter 5/16 inch, useable length 1 1/4 inch, Ring diameter 1 5/8 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP516)
$4.28

Linch Pins, Pack of 10 - 7/16 inch diameter pin x 1-3/4 inch usable length, 1-5/8 inch diameter ring. Enter 1 for package of 10. (Part No: DKLP91)
$2.10

Linch Pins, Pack of 10 - Linch Pins. 3/16 inch outside diameter pin x 1-1/4 inches Long. ***Enter 1 for package of 10*** (Part No: DKP316)
$4.17

Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. Additional $60 shipping due to the weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HF141101)
$178.02

Universal Drawbar Lock - For CAT I drawbars only (drawbars that are 1 inch thick x 2-1/2 inch width) . Prevents drawbar from rotating. (Part No: 49A29)
$22.14

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: DBL2)
$20.93

Universal Stabilizer Chain Kit - Chain stabilizers, turnbuckle and chain links adapt to any size 3-point hitch, usually used on larger tractors. VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed and sold in pairs, less brackets. (Part No: SK102CH)
$52.87

Hydraulic System
Hydraulic Parts, Universal - Universal hydraulic parts such as hoses, filters, pressure gauges etc.. can be found in the Accessories and Universal parts section. (Part No: Hydraulic_Parts)
$00.00

Implements
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317)
$14.00

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317)
$14.00

Axle Nuts (5) - 5 Pack of Axle Nuts. Enter 1 for pack of 5. (Ref 4) Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 15622BH)
$1.69

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 170BH)
$1.94