Brakes

Brake Band - Lined Brake Band (1) For A, Super A to serial # 339641, B. (Part No: 51582DBX) $52.73

Brake Pedal Shaft, LH - Fits A, AV, B, BN, Super A, Super AV, Super AV1, Super A1, 100, 130, 140. (Part No: 51425DX) $69.22

Brake Pedal Shaft, RH - Fits A, AV, B, BN, Super A, Super AV, Super AV1, Super A1, 100, 130, 140. (Part No: 51507D) $64.38

Brake Return Spring - For tractor models 100, A, AV, B, BN, Super A, Super AV, 130, 140. Overall Length 7" 2 used for brake pedals, 1 used for clutch pedal. (Part No: 47845DA) $15.70

Clutch

Clutch Assembly - For tractor models A, B, C, Super C, 100, 130, 140, 200, 230, 240, 404, 2404 all with Rockford style clutch. Remanufactured disc and pressure plate assembly. Solid Disc, no springs, 9 inch disc with 6 splines 1 1/4 inch hub. New release bearing and new pilot bushing. This kit will replace the early and late style. If you have the graphite bearing, you may also need the new style bearing sleeve Part # 375493K-Sleeve For an additional charge. Note in comments section of order form if 375493K-Sleeve is needed. Replaces 375493R91, 56631DB, IHS958. (Part No: 375493K) $257.48

Clutch Housing Cover - For A, Super A, AV, B, BN, C, Super C, Cub. Clutch Housing Cover is round with Bracket and Screw. (4209R) (Part No: 57576DX) $19.95

Clutch Release Bearing Carrier - For tractor models A, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240, 404, 2404 (Direct replacement for following when equipped with replaceable throwout bearing A, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C)replace the graphite style (non-replaceable) throwout bearing and carrier # 350830R31 used on early models. Replaces: 6116D, IHS1155. (Part No: 375493K-Sleeve) $62.79

Clutch Release Bearing, Greaseable - For tractor models A, Super A, B, C, Super C, H, Super H, 100, 130, 140, 200, 230, 240, 404, 2404. This bearing is 3.5625" O.D., 2.0625" I.D. (Part No: 361292R91) $32.19

Clutch, Dust Cover - For tractor models A, B, C, Super A, Super C, 100, 130, 200, 230. (Part No: 57579DX) $14.70

Pilot Bushing - I.D. .883", O.D. 1.125", thickness .995". For tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, 404, 2404. (Part No: 364527R91) $5.99

Transmission Disc, 9 inch - Rockford Style, 6 splines 1.25", solid disc, fits models: 100, 130, 140, 200, 230, 240, 2404, 404, A, B, C FARMALL, Super A, Super C. (Part No: 56631DB) $62.03

Cooling System

Fan Assembly - For tractor models A, Super A serial #250001-317191, Super AV, Super A1, Super AV-1 (ALL "A" and "Super A" series Between Serial # 250001-317191), B, C, Super C. Fan measures 15 5/8 inches, pulleys measure 3 3/4 and 3 1/4 diameter. Replaces OEM # 701360R91. (Part No: 701360R) $103.40

Fan Belt - For tractor models A, B, C (with C-113 engine; without water pump), Super A. 11/16" x 32-1/4" (Part No: 46869D) $9.69

Generator Belt - For tractor models 130, 200, 230, (A, AV SN# 317191 and up), B, BN, Super A, Super AV, (Super C SN# 114646 and up). All with gas engines. (Part No: 52318DA) $7.49

Radiator Cap - For tractor models A, Super A, B, C with Non pressurized system. This cap is original style with water imprint. Does not fit our part #354875R93, 58124DBX or 356356R94. (Part No: 43983D) $9.29

Radiator and Air Hose Set - For tractor models A, Super A WITHOUT Water pump, B. Radiator and Air Cleaner Hose Kits include Original Whittek Tower Style Hose Clamps. Radiator hoses are 2.25" long and 2" ID (Part No: R2700) $39.56

Radiator, 2 Inch Inlet and Outlet Tubes - Fits A and AV after SN# 41330, B and BN after SN# 40193, (Super A, Super AV, Super AV-I, all to SN# 355669) all without water pump. Has 2" inlet & outlet tubes. Core Size is 17 3/8" Wide X 16 1/2" High. (Part No: 58124DBX) $347.49

Water Block Drain Plug, Winged - Plug 3/8" pipe thread, has "IH" and part number stamped in it, cast iron with zinc plating. For tractor models A, AV, Super A, Super AV, Super A1, Super AV1, B, BN, C, H, HV, Super H, Super HV, I4, I6, ID6, I9, ID9, M, MD, MV, MDV, Super M, Super MD, Super MV, Super MDV, MTA, 04, 0S4, 06, 0S6, ODS6, T6, T340, TD6, T9, TD9, W400, W450, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650 (Gas / Dsl), serviceable for Cub, Cub LoBoy. (Part No: 45314DC) $10.54

Water Pump - New - With pulley, fits models with C123 Gas Engine: 100, 130, 200 SN# <501-65000, 230 SN# <501-65000, 240 SN# <501-65000, A, B, C, Super A, Super C. (Part No: 355760R93) $112.43

Decals and Emblems

Decal Set - For Farmall A Culti-vision. Set of 14 self adhesive decals. Printed on Mylar. (Part No: IHCACV) $25.15

Decal Set - For model A, McCormick Deering (1939-1944). Set of 11 self adhesive decals. Printed on Mylar. (Part No: IHCMDA) $31.45

Decal Set - For model A McCormick (1945-1952). Set of 9 self adhesive decals. Printed on Mylar. (Part No: IHCA) $25.15

Front Emblem - For tractor models A, AV, B, BN. Bright Metal With "Farmall" Spelling. (Part No: 43658D) $42.41

Drive Train

Gear Shift Knob - For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, W4, W6, WD6, Super W6, W9, WD9, Super WD9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 354, 400, 404, 450, 424, 460, 504, 560, 600, 606, 660, and on the hydraulic lever control on the 454 and 574. Gear shift lever knob. Replaces 3121549R1, IHS266. (Part No: 53717DA) $9.18

Gear, Transmission Oiler Slinger - Also replaces 58340D. For tractor models 100, 130, 200, 230, 240 with High Speed & Low Reverse Attachment, A SN# 39022>, B SN# 39022>, A, C, Super A, Super C. (Part No: 354643R11) $171.70

Electrical System

Alternator Bracket Kit - For tractor models A, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 200, 230, will also work for Power units U2, U2A. (Part No: IHALTBKIT) $47.33

Coil, Original, 12 Volt - OEM style coil. For tractor models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. (Part No: 353875R91) $54.40

Coil, Original, 6 Volt - OEM style coil. For tractor models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. (Part No: 353874R91) $54.40

Condenser - Services IH distributors 1951-1962 also services J4 magnetos. For tractor models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 300, 330, 340, 350, 400, 404, 450, 460, 504, 560, 606, 660, 706, 806, A, B, C, Cub, Cub 154, Cub 185 Lo-Boy, Cub Lo-Boy, H, HV, M, MD, Super A, Super C, Super H, Super M, Super MTA. (Part No: 353903R1) $4.49

Condenser, Magneto - Condenser for IH Models using H4 F4, J4 Magneto (replaces 373892R91). For tractor models 100, 130, 200, 300, 350, W4, W6, A, B, BN, C, H, M. (Part No: 71455C1) $10.68

Distributor - Used when changing from magneto to distributor, coil and bracket included. For tractor models Cub, A, B, C, H, M. Refundable $100 MAGNETO core charge will be added to your order. Upon return of an original magneto for the same tractor, your core charge will be refunded. For replacement parts, uses Tune Kit ATK5BIR and Cap 351693R92. (Part No: R1197391) $389.48

Distributor Cap - 4 Cylinder Clip Type Cap For Delco Distributors: replaces 811735 Delco and 1750411M1. For tractor models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414. (Part No: 1750411M91) $6.63

Distributor Cap - 2-3/16" high, fits 4 cyl. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, A, AV, B, BN, C, Cub, 154 Lo-Boy, Cub 185 Lo-Boy, H, M, MD, Super A, Super M, Super C, Super H, Super HV, M, MV, MD, Super M. (All with IH Distributor, not for Delco Distributor). Will also fit J4 magneto. (Part No: 351693R92) $5.91

Distributor Drive Shaft - Shaft for the Distributor Drive. For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MD, 06, OS6, W6, WD6, W9, WD9, WR9, WDR9, WR9S, 200, 330, 340, 350, 400, W400, 404, 450, W450, 504. Distributor Shaft, for battery ignition with original IH distributor. (Part No: 353934R11) $53.02

Distributor Dust Cover - Fits early Delco distributor with clip held cap. For tractor models (A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super HV, M, MV, Super MV, MTA all with Delco vertical conversion distributor 1111411). (Part No: 1900119) $6.75

Distributor Dust Cover - Used with horizontal IHC distributor 353898R11 or J4 magneto on Models: A, AV, Super A, Super AV1, B, BN, C, Super C, Cub, Cub Lo-Boy, H, HV, Super H, Super HV, M, MV, MD, MDV, Super M, Super MD, Super MTA, W4, W6, W9, WR9, WR9S, WDR9, O4, O6, OS6, ODS6, I4, I6, ID6, I9, ID9, T6, TD6, TD9, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404. Replaces 384831R91. (Part No: 353900R11) $16.80

Distributor Shaft Bushing and Shim Kit - Delco Distributor Shaft Bushing and Shim Kit. Fits A, A-I, A1, AV, AV-1, B, BN, C, H, HV, I4, I6, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, T6, U2, U2A, U4, U6, W4, W6 all with Delco vertical conversion distributor 1111411. Replaces: washer: 811913, shim washer: 810074, 810078, bushing: 1909003, 1952334 (Part No: ABC3007) $22.50

Distributor Shaft Bushing and Shim Kit - International Distributor Shaft Bushing and Shim Kit. Fits: A, A1, AV, AV1, B, BN, C, Cub, Cub Lo-boy, H, HV, M, MTA, MTAV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 300, 330, 340, 3444, 350, 3514, 400, 404, 424, 444, 450, 504, 600, 650. Replaces: 252739R1, 352298R1, 353899R1, 353921R1, 373577R91, 86637641. This is a 5-piece kit. The length is 2.006". (Part No: IHS3166) $32.00

Distributor with Electronic Ignition - New and complete distributor FOR USE WITH 6 VOLT POSITIVE GROUND SYSTEMS ONLY. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. For: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. (Part No: 107304C91-6V) $481.47

Distributor with Electronic Ignition - 12V - New and complete distributor FOR USE WITH 12 VOLT NEGATIVE GROUND SYSTEMS ONLY. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. For: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. Note: This distributor has a maximum advance of 21 degrees. Some applications require an advance up to 40 degrees. Verify with your service manual this distributor will work for your application. (Part No: 107304C91-12V) $451.33

Distributor, New - Original IHC design. For tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, H, HV, I4, I6, I9, ID9, ID6, M, MD, MDV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD-TA, Super MDV, Super MTA, Super MV, Super W4, Super W6. (Part No: R6332) $311.85

Distributor, New - New and complete distributor. For tractor models: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA. Replaces 354900R91, 107296C91, 366928R91, 357935R91, 353890R91. (Part No: 107304C91) $186.30

Distributor, Rebuilt - Complete Remanufactured distributor for tractors with IH distributors. For tractor models Cub, A, B, C, Super A, H, M, Super H, W6, W9, Super W6, 100, 130, 200, 240, 300, 400, 404, 450, 504. A refundable $100.00 core charge will be added to your invoice. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R1197003) $230.05

Distributor, Rebuilt - Complete Remanufactured distributor for tractors with DELCO distributors. For tractor models Cub, A, B, C. NO Core charge. (Part No: R1197004) $303.32

Electronic Ignition Conversion Kit - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 6 volt POSITIVE ground system only. Use with distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650 (Part No: 1442P6) $95.84

Electronic Ignition Conversion Kit - Electronic Module Replaces Points and Condenser. Use on tractors with 12 volt Positve ground system only. (FOR NEGATIVE GROUND Order Part #1442)Use with distributor #357935R91 or 353898R1 on models: B, Cub, cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650 (Part No: 1442P12) $95.84

Electronic Ignition Conversion Kit - 12V Negative Ground - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 12 volt NEGATIVE ground system only. Use with IH distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. Verify distributor number before ordering. (Part No: 1442) $88.52

Electronic Ignition Conversion Kit - 12v Negative Ground - For Tractor Models: A, AV, Super A & AV, B, BN, C Super C, H, HV, Super H & HV, M, MV, Super M & MTA, Super MD & MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with distributor part no. 1885368. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 12 volt NEGATIVE ground system only. Distributors with clip type cap. (Part No: 1142) $88.52

Electronic Ignition Conversion Kit - 12v Positive Ground - For Tractor Models: A, AV, Super A & AV, B, BN, C Super C, H, HV, Super H & HV, M, MV, Super M & MTA, Super MD & MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with distributor part no. 1885368. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 12 volt POSITIVE ground system only. (Part No: 1142P12) $97.67

Electronic Ignition Conversion Kit, 6v Positive Ground - For Tractor Models: A, AV, Super A & AV, B, BN, C Super C, H, HV, Super H & HV, M, MV, Super M & MTA, Super MD & MDV, W4, Super W4, W6, Super W6, W9, Super W9, 354, B414, all with distributor part no. 1885368 with clip type cap. Electronic ignition conversion kit replaces points and condenser with an electronic module. Use on 6 volt positive ground system only. (Part No: 1142P6) $97.67

Fuse Housing - Reproduction of original Fuse Housing. Comes as pictured. For tractor models (Super A, Super AV, A1 all with magneto), C, Super C, 200, (H late with regulator under tank), Super H, HV, (M with regulator on post), (Super M 1953-1954), (Super M diesel), Super MTA, W4, OS4, O4, 100, 130, 400, 450. Replaces: 365515R91, 376852R91, 354232R91 (Part No: 376852R91) $6.79

Generator Belt - For tractor models (A, AV SN# 250001 to 317191), B, BN, C, Super A, Super AV, (Super C SN# 100001 to 114645) all with gas engines. (Part No: 49291D) $8.38

Generator Cut-Out Relay - 6 Volt Cut-Out fits: A, AV, B, BN, C. (Part No: 574459) $41.76

Generator, 6 Volt, Remanufactured - 6 volt, 25 amp, Delco Fits Models: 200 1.75" SHAFT, 400 501-13673 GAS, A, A1 with BATTERY, AV with BATTERY, AV1 with BATTERY, B, BN, C, (Cub prior to SN 221292 and Cub Lo-Boy prior to SN 16397 - both with 1.75" long shaft) H, HV, M, MV, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MTA GAS, TD6 1955-56, TD9 1955-56, W4, W6, W6TA. Refundable $40.00 core charge will be added to your order after the order has been received and will not show on your reciept. (Part No: 356936R91) $249.71

Ignition Switch - For the following Models using a magneto: Cub, Cub Lo-Boy, A, B, C, H, M, 100, 130, 140, 200, 230, 300, 350, 400. NOT like original. (Part No: 54207DB) $7.88

Ignition Switch - 2 terminal. For the following Models using a distributor: Cub, Cub Lo-Boy, A, Super A, B, C, Super C, H, Super H, M, Super M, (140 6 volt), 200, 230. NOT like original. (Part No: 62801DC) $7.88

Ignition Tune Up Kit - For IH Distributor-NOT Delco. Complete Kit For: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo Boy, Cub 154 Lo-Boy, Cub 185 Lo-Boy. All with 4 cylinder gas engines and IH distributor from 1951 through 1962. Contains: Points, Plugs, Condenser, rotor. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Part No: IHTK1) $21.15

Ignition Tune Up Kit, Basic - Fits 4 cylinder gas engines with battery ignition 1951 thru 1962 with IH distributor (NOT for Prestolite), kit contains rotor, condenser, points, and proper point gap guage. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 444, 450, A, B, C, Cub 1962 and earlier, H, M, Super A, Super C, Super H, Super M, Super MTA, W4, W6. (Part No: ATK5BIR) $15.30

Ignition Tune Up Kit, Basic, Delco Clip Held Cap - Ignition kit For Delco ONLY distributor with CLIP held cap. Contains points, condenser, and rotor. For tractor models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414. (Part No: ATK1DCR) $6.60

Ignition Tune Up Kit, Comprehensive - For tractor models A, AV, B, BN, C, Super A, Super AV, Super C, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, H, HV, 4, 444, Super H, Super HV, Super W4, 300, 350, M, 6, Super M, Super MTA, Super W6, W6-TA, 400, 450. All with IH Distributor, not for Delco Distributor. Kit contains spark plugs, points, condenser, rotor, gap gauge, (IHTK1) distributor cap (351693R92) and set of universal plug wires (CPN12259). NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Part No: IHTUNEKIT) $49.55

Ignition Tune Up Kit, Delco Clip Held Cap - FOR DELCO DISTRIBUTOR WITH CLIP-HELD CAP. 4 Cylinder kit includes spark plugs, points, condenser, and rotor. For tractor models with clip held Type Delco Distributor Caps. For tractor models A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, Super MD, Super MDV, 4, Super 4, 6, Super 6, 9, Super 9, 354, B414. (Part No: MFITK10) $17.77

Magneto Coil Cover - For tractor models 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Part No: 47449DAY) $28.23

Magneto Distributor Cap, H4 Magneto - For H-4 MAGNETO ignition on Models: 100, 200, 230, 240, 300, 330, 340, 350, 400, 450, A, B, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Part No: 47413DYC) $15.75

Magneto Point Set - For J-4 Magneto only. (Part No: 353172R1) $4.49

Magneto Point Set, F-4 - For tractor models F-4 type magneto only. Used on A, B, C, H, HV, M, MC, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA, 200, 230, 240, 300, 340, 350, 400, 450. (Part No: 353173R1) $21.60

Magneto Points - Point Set Fits J4 and H4 Magneto(can work with F4 magneto with modify) (Part No: 353171R91) $7.89

Magneto Rebuild Kit, H4 - Magneto Rebuild Kit For H4 Magneto used on: 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. Includes condenser, winding coil, points, rotor, cap, coil cover, gear and gasket. (Part No: H4-KIT) $160.40

Magneto Tune-up Kit For H4 - Magneto Tune-up Kit For H4 Magneto used on: 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA, W4, W6. Includes condenser, points, rotor. (Part No: 21A10R) $18.38

Magneto, Rebuilt - H-4 magneto with CLOCKWISE Rotation (as viewed from Drivers seat). For tractor models 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA, W4, W6. Right hand flange mount. (Part No: R1196807) $527.95

Rotor - For IH Distributors on models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo Boy, Cub 154-Lo Boy, Cub 185-Lo Boy. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Part No: 353896R1) $2.62

Spark Plug - For: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo Boy, Cub 154-Lo Boy, Cub 185-Lo Boy. Price shown is for EACH, shipped in lots of 4. Enter 4 in QTY box. Replaces OEM 360942R1. (Part No: AL386) $2.33

Spark Plug Wire Set, Custom - IH or Delco Distributors. For tractor models Cub, A, Super A, B, BN, C, Super C, H, Super H, M, MTA, 300, 350, 400, 450. (Part No: S.67475) $14.98

Starter Drive - Starter drive. Fits A, B, C, H, M, Super M, 100, 130, 140, 300, 330, 340, 350, 200, 240, 400, 450 Replaces OEM# 1107021, 1107412, 1107606, 1107427, 1107174, 1107067, 1107444, 1107093, 1107448, 1108097, 1107408, 1108098, 1107886, 1108093, 1108080, 1108038, 1108041, 1108012, 1108173, 1108016, 1108174, 1108185. (Part No: 565549) $35.58

Starter Switch, Manual - Starter switch, manual, saddle mount. For A, B, C, Cub, Cub Lo-Boy, Super A&AV, Super C, H, HV, Super H&HV, Super M&MV, Super W6&WD6, 100, 130, 140, 200, 230. Saddle Mount, 2 Mounting holes, 190 I.D. With 1-3/8 centers. Replaces Delco 1918405, 1932131, and OEM IH 593292C1. (Part No: 1925781) $9.35

Starter, 6 Volt - For tractor models A, B, C, Super A, Super C, 100, 140, 200, 230, 240. All 1952-1961 with C113 or C123 gas engines using starter switch mounted to the starter. Replaces Delco 1107093 & 1107067. Uses 593292C1 starter switch. (Part No: 1107093R) $107.57

Switch, Ignition - For Distributor Ignitions, 2 terminal switch. For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230 (Part No: R2720) $42.69

Switch, Ignition - For Magneto Ignitions. Switch has only 1 terminal (Picture shows 2). For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub (Part No: R2721) $42.69

Terminal Clip - Light terminal plate with screws. For 200, 230, 300, 330, 350, 400, 450, 600, 650, A, B, C, H, HV, M, MD, O4, O6, ODS6, OS4, OS6, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super WD9, Super WDR9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S (Part No: 79407H) $11.94

Voltage Regulator - Regulator, 6 volt, saddle mount, 4 terminal. Replaces Delco cut outs 1116766 & 1116809 when used with conversion kit VRK1815. For tractor models Cub, Cub Lo-Boy, A, Super A, B, C, H, M. Replaces: 1118265, 1118305, 1118790, 1118786 (Part No: VR1813) $17.25

Wiring Harness - WIRE HARNESS switch to rear lights For A, B. (Part No: 30711DX) $35.36

Wiring Harness - For A, B. COMPLETE Wiring Harness. Restoration Quality. Harness covers entire tractor. Original cloth sewn harness. (Part No: R3716) $161.59

Wiring Harness, Magneto Ignition - For use with voltage regulator-magneto ignition system only. Ignition wire harness fits: A, A1, AV, AV1. (Part No: 354231R92) $35.28

Engine Bearings

Main Bearing Kit - For C113 & C123 4-cylinder gas engines. (1 Kit Used per Engine). If other than Standard needed, specify size in Comments Box section when ordering; (.010, .020, .030 available.)For tractor models A, AV, B, BN, Super A, Super AV, Super A-1, Super AV-1, C, Super C, 100, 130, 140, 200, 230, 240 (Part No: MBK113) $71.21

Main Bearing Kit - .002 - For C113 & C123 4-cylinder gas engines. (1 Kit Used per Engine). .002 (Also available in STD, .010 and .020) For tractor models A, AV, B, BN, Super A, Super AV, Super A-1, Super AV-1, C, Super C, 100, 130, 140, 200, 230, 240 (Part No: MBK113-002) $108.79

Rod Bearing Set - For C113 & C123 Gas engines. Standard Journal Measure 1.750 inches. For tractor models A, AV, B, BN, Super A, Super AV, C, Super C, 100, 130, 140, 200, 230, 240. Connecting Rod Bearing Kit. (1 Kit Used per Engine). Available in Std, .002, .010, .020, .030 please specify in comments section what you need. (Part No: CRK113) $42.89

Engine Gaskets

Complete Gasket Set with Seals - Overhaul gasket set For tractor models 130, 140, 22, 230, 240, 62, 76, 81, A, A1, AV, AV1, B, BN, C, Super A, (U-2, U-2A up to SN# 22113), (330, 340, 404 with C135). Replaces FS3150. (Part No: OGS113) $106.15

Crank Seal, Front - For tractor models 100, 130, 140, 200, 22, 230, 240, 62, 76, 81, A, A1, AV, AV1, B, BN, C, Super A, Super A SN# 255418-310299, Super A SN# 310300>, Super AV, Super AV SN# 255418-310299, Super AV SN# 310300>, Super C, U-2 SN# <22113, U-2A SN# <22113. (Part No: 389407R92) $11.34

Crank Seal, Rear - Fits, 100, 130, 140, 200, 22, 230, 330 SN# <100500, 340 SN# <100500, 62, 76, 81, A, A1, AV, AV1, B, BN, C, Super A, Super A SN# 255418-310299, Super A SN# 310300>, Super AV, Super AV SN# 255418-310299, Super AV SN# 310300>, Super C, U-2 SN# <22113, U-2A SN# <22113 (Part No: 24425D) $11.00

Gasket Set Upper - For early engines without a water pump. For C113 Gas engine in models: 130, 140, 22, 230, 240, 62, 76, 81, A, A1, AV, AV1, B, BN, C, Super A, Super A SN# 255418-310299, Super AV, Super AV SN# 255418-310299, U-2 SN# <22113, U-2A SN# <22113, (330, 340 up to SN# 100500). (Part No: 354474R95) $45.17

Gasket, Manifold - Used with 251175R21 Manifold Fits Models, 100, 140, 200, 230, 240, A, B, C, Super A, Super C, All with 113 & 123 CID gas engines. (Price is for one gasket, requires two) ** Must order in Multiples of 2 ** (Part No: 352014R1) $7.40

Head Gasket - Head gasket for 130, 140, 22, 230, 240, 62, 76, 81, A, AV, A1, AV1, B, BN, C, Super A, Super AV - all with C113 engine. (Part No: 366301R11) $26.91

Oil Pan Gasket - For 140, 130, 100, 140, 300, 22, 230, 240, 330, 340, 62, 76, 81, A, A1, AV, AV1, B, BN, C, Super A, SUPVER AV, Super C, - ALL WITH C113 OR C123 ENGINES. (Part No: 43458DB) $6.96

Rear Crankshaft Seal Kit - Fits tractor models A, AV, B, BN, C, F12, F14, I12, I14, O12, O14, W12, W14 (2-piece rear felt seal ONLY fits as a rear crankshaft seal), Super A, Super A-1, Super AV, Super AV-1, Super C 340 (gas, up to engine SN: 100500), 100, 130, 140, 200, 230, 240, 330. Replacement part # & kit contents: (2) 24425D, 24425DA felt seals, (2) 43447D, 43447DA seal retainer center gaskets, (1) 43448D seal retainer to block gasket, (4) 43445D seal plate felt plugs, and (4) 43446D, 43446DA seal retainer plate gaskets (Part No: IHS2416) $14.95

Engine Rebuild Kits

Basic Engine Overhaul Kit, Less Bearings with Flat Head Pistons - Made by TISCO. Basic Engine Kit, Less Bearings, for A & AV, B & BN, Super A & AV to SN# 310299, C. (C113 CID 4-cyl Gas) For tractors with flat head standard compression pistons. Kit contains sleeves & sleeve seals, pistons & piston rings (overbore from 3" to 3-1/8"), pins & retainers, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Part No: BEKH1150-LCB) $398.42

Basic Engine Overhaul Kit, Less Bearings with Stepped Head Pistons - Made by TISCO. Basic Engine Kit, Less Bearings for A & AV, B & BN, Super A & AV to SN# 310299 (C113 CID 4-cyl Gas) For tractors with stepped head high compression pistons. Kit contains sleeves & sleeve seals, pistons & piston rings (overbore from 3" to 3-1/8"), pins & retainers, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Part No: BEKH1154-LCB) $398.23

Basic In-Frame Engine Kit, with Flat Head Pistons - Made by TISCO. For A & AV, B & BN, Super A & AV to SN# 310299, and C. Kit contains complete sleeve and piston kit with rings, pins and retainers (overbore 3" to 3-1/8"), Upper gasket set (with head gasket) and pan gasket. (Part No: BIFH1150) $352.88

Basic In-Frame Engine Kit, with Stepped Head Pistons - Made by TISCO. For A & AV, B & BN, Super A & AV to SN# 310299 and C. (C113 CID 4-cyl Gas) For tractors with stepped head high compression pistons. Kit contains complete sleeve and piston kit with rings (overbore from 3" to 3-1/8"), pins and retainers, Upper gasket set (with head gasket), and pan gasket. (Part No: BIFH1154) $352.70

Engine Overhaul Kit, Comprehensive - Less Bearings - with Stepped Head Pistons - Overhaul Kit For A & AV, B & BN, Super A & AV to SN# 255417 (C113 CID 4-cyl Gas, For tractors with stepped head high compression pistons. Contains Sleeve & Piston Kit (sleeves, pistons & rings, pins & retainers, overbore from 3" to 3-1/8"), Complete Gasket Set, Valve Parts: (intake & exhaust valves, springs, guides and keys). IMPORTANT: specify the part numbers on your old intake & exhaust valves to ensure that correct replacements are sent. (Part No: EOK1154-LCB) $569.98

Engine Overhaul Kit, Comprehensive with Flat Head Pistons - Made by TISCO. Overhaul Kit for A & AV, B & BN, Super A & AV to SN# 255417 (C113 CID 4-cyl Gas). For tractors with flat head standard compression pistons. Contains Sleeve & Piston Kit (sleeves, pistons & rings, pins & retainers, (overbore from 3" to 3-1/8"). Complete Gasket Set with crankshaft seals. Connecting Rod Bearing Kit. Main Bearing Kit. Valve Parts (intake & exhaust valves, springs, guides and keys). Available with Std., .002, .010 or .020 bearings. IMPORTANT: Specify Rod and Main bearing sizes, and the part numbers on your old intake & exhaust valves to ensure that correct replacements are sent. (Part No: EOK1150) $663.72

Engine Overhaul Kit, Comprehensive with Stepped Head Pistons - Made by TISCO. Overhaul Kit For A & AV, B & BN, Super A & AV to SN# 255417 (C113 CID 4-cyl Gas, For tractors with stepped head high compression pistons. Contains Sleeve & Piston Kit (sleeves, pistons & rings, pins & retainers, pin bushings, overbore from 3" to 3-1/8"), Complete Gasket Set, Connecting Rod Bearing Kit, Main Bearing Kit, Valve Parts: (intake & exhaust valves, springs, guides and keys). Available with Std., .002, .010 or .020 bearings.. IMPORTANT: Specify Rod and Main bearing sizes, and the part numbers on your old intake & exhaust valves to ensure that correct replacements are sent. (Part No: EOK1154) $663.55

Engine Overhaul Kit, Comprehensive, Less Bearings with Flat Head Pistons - Made by TISCO. Overhaul Kit, Less Bearings for A & AV, B & BN, Super A & AV to SN# 255417 (C113 CID 4-cyl Gas) For tractors with flat head standard compression pistons. Kit contains sleeves & sleeve seals, flat head pistons & piston rings (overbore from 3" to 3-1/8"), pins & retainers, complete gasket set with crankshaft seals, intake & exhaust valves, valve keys, guides & springs. ENGINE BEARINGS ARE NOT INCLUDED. Valve length is 4-25/32". (Part No: EOK1150-LCB) $570.17

Valve Overhaul Kit - C113 & C123 Gas - Made by TISCO. Fits Super A, AV SN# 255418 to SN# 310299, C and Super AI, AV1 SN# 310300 & up, Super C, 100 & 200. Valve Length 4-57/64, (Gas 4 cyl, C113, C123 CID). Kit includes Valves, Valve Springs (for Non-Roto Exhaust Valve), Valve Keys, Valve Guides. (Part No: VOKH123) $146.80

Valve Overhaul Kit - C113 4-cyl Gas - Made by TISCO. Fits A, AV, B, BN, Super A, AV to SN# 255417 Valve Length 4-25/32", (4cyl Gas/C113). Kit includes Valves, Valve Springs(For Non-Roto Exhaust Valve), Valve Keys, And Valve Guides. (Part No: VOKH113) $187.61

Valve Train Kit - For 113 CID Gas Engine(Valve Length 4.83") Models: 130, 140, 22, 230, 240, 62, 76, 81, A, AV, A1, AV1, B, BN, C, Super A, Super AV, U-2 SN# <22113, U-2A SN# <22113. Kit includes 4 intake valves, 4 exhaust valves, 8 valve springs, 8 valve guides, 16 valve keys. (Part No: VTK113) $190.66

Valve Train Kit - For 113 CID 4 cylinder gas engines(valve length 4.94") Models: 130, 140, 22, 230, 240, 62, 76, 81, A, A1, AV, AV1, B, BN, C, Super A, Super A SN# 255418-310299, Super AV, Super AV SN# 255418-310299, U-2 SN# <22113, U-2A SN# <22113.Kit includes 4 intake valves, 4 exhaust valves, 8 valve springs, 8 valve guides, 16 valve keys. (Part No: VTK209) $133.50

Engine Parts

Camshaft Timing Gear - 66 tooth. For tractor models (100, 130, 140, 200, 230, 240, Super C all with 123 CID eng), (330, 340, 404 all with 135 CID eng), (424 with 146 CID eng), (444, 504 with 153 CID), (A, AV, B, BN, C, Super A, Super A1, Super AV, Super AV1 with 113 CID eng). (Part No: 375712R1) $172.06

Connecting Rod - Verify Casting number 30926D. For F14, A, C, B, Super A, Super C, 100, 200, 230, 240 all gas. Reconditioned rod with pin bushing and rod bolts. Call for availability. (Part No: 30926D) $113.98

Crankshaft Pulley - Crankshaft Pulley For A, B, C, Super A. Presses on. (Part No: 6502DC) $77.00

Crankshaft Timing Gear - 33 Teeth, used in C113, C123, C135, C146, & C153 Engines. For tractor models A, Super A, AV, Super AV, B, BN, C, Super C, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504. (Part No: 46870DA) $103.49

Crankshaft, Reground - For tractor models: A, B with Casting #46402D, includes Rod and Main Bearings. (Part No: R1198118) $426.93

Cylinder Head, Rebuilt - Comes complete with seats and guides but NOT valves. For tractor models A, B both with gas engines and casting # 6716DB. (Part No: R1193721) $682.73

Governor Arm, Rockshaft - For tractor models (200, 230, 240 SN# up to 65000 with C123 engine), A, A1, AV1, B, C, Super A, Super AV, Super C. (Part No: 6507DA) $36.11

Governor Assembly - For A, Super A, B, C, Super C, 100, 130, 140, 200, 240, 330, 340, 404. OEM# 356746R91. Does NOT include housing. (Part No: R0612) $119.47

Hand Starting Crank, with Spinner - For tractor models (A, B, C, Super A, ALL WITH THE C113 ENGINE), (200, 230, 340, 404, 504 all with tricycle front). Starting Hand Crank with Spinner. Measures 13 1/2 inches to the first bend Longest Straight Section. (Part No: 53385DBX) $56.70

Pushrod - Fits A, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, U2, U2A, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504 (all with C113, C123, C135, C146, C153 gas/LP engines) 10.762" length, 0.250" tube diameter. Replaces: 360213R91, 357548R1, 47386D, 47385D (Part No: 47385D) $22.50

Ring Gear,Flywheel - For tractor models A, B, C, Super A, Super C, 100, 130, 140, 200, 240. This Gear has 90 teeth, 11.435" O.D., .50" wide. (Part No: 55755DB) $35.12

Tappets, Resurfaced - Sold Individually. For A, B, C, Super C, 130, 140, 230, 240, 330, 340, 4040, 424, 444 all with 113, 123 and 153 CIC Engines. (Part No: R1188366) $17.21

Valve Guide - Must be ordered in quantities of 8, price is for 1. For tractor models 100, 130, 140, 200, 22, 230, 240, (330, 340 SN# 100500 and before), 62, 76, 81, A, A1, AV, AV1, B, BN, C, Super A, Super AV, Super C, (U2, U2A SN# less than 22113). *** Must order qty 8, priced each. *** (Part No: 356583R21) $10.12

Valve Keys - ** Enter quantity of 1. Priced per set of 16. ** For tractor models 100, 130, 140, 200, 22, 230, 240, 300, (330, 340 SN# less than 100500), 350, 62, 76, 81, A, A1, AV, AV1, B, BN, C, H, HV, O4, OS4, Super A, Super AV, Super C, Super H, Super HV, Super W4, (U2, U2A SN# less than 22113), W4. (Part No: 42026D) $8.56

Valve Service Kit - Cylinder HEAD Service KIT For 100, 200, A, AV, B, BN, C, Super AV, Super C, Super A. Contains: springs, guides, locks, (no valves). (Part No: VSKH113) $78.95

Valve Set, Exhaust - Set of 4 exhaust valves for Models: A, AV, Super A & Super AV SN# 255418 To SN# 310299, and C. (Flat head compression piston)(Cylinder Sleeve 3-5/16" O.D. at Seal)(Valve Length 4-57/64) (Part No: 57798D) $54.31

Valve Spring - ** Enter quantity of 1 for set of 8. Priced per set of 8. ** Used on valves with length of 5-5/16". For tractor models 100, 130, 140, 200, 22, 230, 240, 62, 76, 81, A, AV, A1, AV1, B, BN, C, H, HV, O4, OS4, Super A, Super AV, Super AV1, Super C, (U2, U2A SN# less than 22113), W4. (Part No: 24544DA) $25.68

Valve, Exhaust - For tractor models A, AV, B, BN, Super A, Super AV, To SN# 255417. (Flat head compression piston)(Cylinder Sleeve 3-5/16" O.D. at Seal)(Valve Length 4-25/32). SOLD by the EACH. (Part No: 42025DA) $17.04

Valve, Intake - Priced each - must order 4. Set of 4 intake valves for Models: A, AV, B, BN, Super A, Super AV, To SN# 255417. (Cylinder Sleeve 3-5/16" O.D. at Seal)(Valve Length 4-25/32) (Part No: 42024D) $11.82

Valve, Intake - For tractor models: A, AV, Super A & Super AV SN# 255418 To SN# 310299, and C. (Flat head compression piston)(Cylinder Sleeve 3-5/16" O.D. at Seal)(Valve Length 4-57/64) (Part No: 57797D) $14.54

Engine Pistons and Sleeves

Pin Bushing - Piston pin bushing. Minimum order qty is 4 - price shown is each. For 3-1/8 overbore piston on C113 CID gas 4 cylinder engine. For tractors: Super A & AV SN# 255418 to SN# 310299 and C. (Part No: 64508D) $11.64

Piston 3 1/8 Bore - Stepped Head Piston Fits 113 CID and 123 CID 4 cylinder gas engines Models: 130, 140, 22, 230, 240, 62, 76, 81, A, A1, AV1, B, BN, C, Super A, Super A SN# 255418-310299, Super AV, Super AV SN# 255418-310299, U-2 SN# <22113, U-2A SN# <22113. (RINGS NOT INCLUDED). (Part No: PA50X) $57.03

Piston Sleeve - Fits 113 CID, 123 CID 4 cylinder gas engines with 3 1/8 inch bore (3 inch bore no longer available). Models: 130, 140, 22, 230, 240, 62, 76, 81, A, AV, A1, AV1, B, BN, C, Super A, Super A SN# 255418-310299, Super AV, Super AV SN# 255418-310299, U-2 SN# <22113, U-2A SN# <22113. Pricing is per liner. 3.31" OD sleeve at seal. (Part No: SW52) $48.05

Sleeve & Piston Kit - Stepped head pistons. For Super A & Super AV to SN# 310299, A, AV, B, BN, C. For C113 Gas Engine. Kit contains: (4) Sleeves, (4)stepped head pistons & all rings, pins & retainers. Overbore from 3" to 3-1/8". (Part No: PK154) $277.34

Sleeve & Piston Kit 3 1/8 Bore - For use with Flat Head Piston on 113 CID, 123 CID 4 cylinder gas engine models: 130, 140, 22, 230, 240, 62, 76, 81, A, AV, A1, AV1, B, BN, C, Super A, Super A SN# 255418-310299, Super AV, Super AV SN# 255418-310299, U-2 SN# <22113, U-2A SN# <22113. (Part No: SK260) $81.10

Sleeve & Piston Kit 3 1/8 Bore - For use with Stepped Head Piston on 113 CID, 123 CID 4 cylinder gas engine models: 130, 140, 22, 230, 240, 62, 76, 81, A, AV, A1, AV1, B, BN, C, Super A, Super A SN# 255418-310299, Super AV, Super AV SN# 255418-310299, U-2 SN# <22113, U-2A SN# <22113. (Part No: SK265) $90.21

Sleeve & Piston Kit, Flat Head Pistons - Kit For A & AV, B & BN, Super A & AV to SN# 310299, C, 130, 140, 230, 240. For C113 and C123 Gas engines. Contains (4)Sleeves, (4) Flat head pistons & rings, pins & retainers. Overbore from 3" to 3-1/8" (Part No: PK150) $263.81

Sleeve Seal Rings - Sleeve seal o-ring kit for 1 cylinder on 113 or 123 CID Gas engines with a 3 5/16 Diameter at the seal for models: A, AV, AV1, B, BN, C, Super A, Super AV, 130, 140, 230, 240. (Part No: SRK713) $4.93

Engine Rings

Piston Ring Set - 3-1/8" bore, 8 compression rings at 3/32", 4 oil rings at 1/4". For tractor models 100, 130, 140, 200, 230, 240, Super C, (Super A, Super AV SN# 310300 and up). All with C123 gas engine. And for tractor models A, B, C, 130, 140, all with C113 CID with 3 1/8 overbore. (Part No: 2C7696) $106.41

Piston Ring Set - Complete set for 3 Inch Bore, 3 Compression at 1/8 and 1 Oil at 3/16. For tractor models A, AV, B, BN, C, F-12, F-14. Replaces: 357677R93, 69791D (Part No: 2C7758) $91.01

Piston Ring Set, 3-1/8" Overbore - Ring set for 4 pistons, for C113 CID gas 4 cylinder engine. Overbore 3 to 3-1/8, cylinder sleeve 3-5/16 O.D. Contains 3 compression rings at 1/8 and oil ring at 1/4 inch per cylinder. For tractors: Super A & AV SN# 255418 to SN# 310299 and C. For 2806, 2826, 2856, 806, 826, 856. If used in replacing piston rings for a Tisco Engine Kit sold after 11/15/08, use part number PRS154. (Part No: PRS150) $55.27

Piston Ring Set, 3-1/8" Overbore - Ring set for 4 pistons. For C113 CID gas 4 cylinder engine. Overbore 3 to 3-1/8, cylinder sleeve 3-5/16 O.D. Contains 2 compression at 3/32, 1 oil at 3/16 per cylinder. For tractors: A & AV, B & BN and Super A & AV to SN# 255417. (Part No: PRS154) $62.03

Piston Ring Set, Standard 3 Inch Bore - Ring set for 4 pistons, for C113 CID gas 4 cylinder engine. Original 3 inch bore. Contains 3 compression rings at 1/8 and oil ring at 1/4 inch per cylinder. For tractors: A, B, Super A & AV SN# 255418 to SN# 310299 and C. For 2806, 2826, 2856, 806, 826, 856 (Part No: 1486596) $117.16

Exhaust System

Exhaust Stack, Chrome, Curved - Double wall. Length 27". For tractor models A, Super A, B, BN, C, Super C, 100, 130, 200, 230, 240, 340. (Part No: R4449) $135.44

Exhaust Stack, Chrome, Straight - Double wall. Length 27". Attaches with a standard exhaust pipe clamp, not included. For tractor models A, Super A, B, BN, C, Super C, 100, 130, 200, 230, 240, 340. (Part No: R4448) $114.11

Manifold Pipe - Six inch manifold pipe screws into manifold numbers R0935 and 251175R1. Inside diameter is 1 1/2, Outside diameter 1 15/16. For tractor models 130, 140, 20, 230, 240, 330, 340, 404, 2404, 424, 2424, 444, 2444, A, B, C, Super A, Super C, 240. Replaces: 47701DB (Part No: R0056P) $13.65

Manifold, Intake/Exhaust - For tractor models A, B, C, Super A, Super C, 240, with C113 or C123 gas engines. Intake and exhaust. Replaces OEM# 251175R11, 251175R21. Gasket set available as part number R0056G . Manifold Pipe available as R0056P. Please specify in comments if needed. (Part No: 251175R1) $131.31

Muffler - Vertical muffler for gas tractors. Inlet I.D. 1-15/16, outlet O.D. 2, length 29, diameter 4-1/4 round body. Fits engines C113, C123, C135. For tractor models: A, AV, Super A, Super AV, B, BN, C, Super A-1, Super AV-1, 330, Super C, 100, 13 For 100, 130, 140, 200, 230, 240, 2404, 330, 340, 404, A, AV, B, BN, C, Super A-1, Super AV, Super AV-1, Super C, Super A (Part No: 360720R91) $28.48

Muffler - Vertical muffler for gas tractors. Fits short clearance muffler for tobacco or grove application, engines: C113, C123, C135. Inlet I.D. 1-15/16 outlet I.D. 2, length 18, diameter 4-1/4, round body. For tractor models A, AV, Super A & AV, B & BN, C, Super For 100, 130, 140, 200, 230, 240, 2404, 330, 340, 404, A, AV, B, BN, C, Super A-1, Super AV, Super AV-1, Super C, Super A (Part No: 360720TOB) $39.31

Vertical Muffler - Stainless Steel. Also replaces 360720R91 . For tractor models A, AV, B, BN, C, Super A, Super C, 100, 130, 200, 230. (Part No: 48832DB) $115.03

Fuel System / Air Intake

Air Cleaner Cap, Slides INTO Pipe - 3.06" body diameter internal fit 1 1/4" O.D.. For tractor models Cub, Cub Lo-Boy, A, AV, B, BN, Super A to SN# 355669. This cap slides INTO the pipe. Replaces: 350750R91. (Part No: R4744) $24.00

Air Cleaner Cap, Slides OVER pipe - 4 1/8" body diameter external fit 1 3/8" I.D.. For tractor models Cub, Cub Lo-Boy, A, AV, B, BN, Super A to SN# 355669. This cap slides OVER the pipe. (Part No: 350750R91) $35.89

Air Cleaner Kit - Oil cup with clamp for models: A, B, Kit Includes 52871D Oil Cup & 52872D Clamp. Cup Inside diameter is 4 1/16, 2 9/16 tall. (Part No: 52871DKIT) $25.91

Carburetor Float - Float Assembly. For tractor models 1050, 330, 404, A, B, Super A, All with Marvel Schebler small bowl carburetors. (Part No: 69919D) $8.09

Carburetor Float - For carburetor models: 11340, 11704, 11340, 11704, 12122, 12613, 12632, 12911, 12115, 12285, 12342, 12225, 8928, 9749, 9167, 9752, 11188, 10514, 10498, 10386, 10441, 13794, 13781, 10522, 11115, 11338, 11339, 14007. For Tractor models: 100, 130, 140, 200, 230, 240, 330, 340, 404, A, B, C, Cub, Lowboy184, Super A, Super C. (Part No: CTP28) $23.54

Carburetor Float, Zenith - For tractor models 200, 230, 240, 330, 340, 404, A, AV, B, BN, C, Cub, Cub Lo-Boy, Super AV, Super C, Super A, ALL WITH ORIGINAL ZENITH CARBURETOR. Measures 2 3/16 from outside edge to outside edge of the two floats. Also fits Zenith: 12522, 12566, 12911, 13794, 13876, 13877. 14007 and 14544 carburetors. (Part No: 53783D) $18.96

Carburetor Fuel Needle - Main jet needle assembly. For Zenith carburetors series 161 model numbers 0-9749, 0-10441, 0-10522. For A, AV, B, BN, C, Super AV, Super C, Super A. (Part No: 71-28) $9.60

Carburetor Kit, BASIC - For A, B, Super A with Marvel TSX253, TSX663, TSX114, TSX597, TSX635, TSX696, TSX936, TSX338. (Part No: MSCK10) $19.87

Carburetor Kit, Basic - Fits Marvel-Schebler carburetor TSX157 and International 69401D. For tractor models: A, B, Super A. For A, B, Super A (Part No: BK27V) $18.73

Carburetor Kit, Basic - Fits Zenith carburetor numbers: 9752, 10514A and International 52499d, and 352376R92. For tractor models: A, B, Super A, Av. For A, AV, B, Super A (Part No: BK9V) $32.52

Carburetor Kit, Basic - Kit for Marvel TSX730, TSX744, TSX896, TSX857, TSX748, TSX896SL, TSX156, TSX157, TSX319 carbs used on 130, 140, 200, 230, 240, 2444, 2504, 3514, 404, 424, A, B, C, Super A. (Part No: MS101) $24.55

Carburetor Kit, Basic - Kit for Zenith 12613, 12632, 8928, 9749, 9167, 9752, 10386, 10441, 10514, 10522 carbs used on 130, 140, A, B, C, Super A, Super C. (Part No: Z101) $28.21

Carburetor Kit, Basic - Fits Zenith carburetors 13339, 11532, 13876, 13863, 13714, 12708, 14987, 12825. For tractor models C, A, B, 230, 330, 340, T340, 130, 140, 240. (Part No: K2119) $27.67

Carburetor Kit, Basic - For A, B with Zenith Carburetor 8808. Basic Kit. (Part No: BK8V) $27.21

Carburetor Kit, Basic - For tractor models A, B, Super A, AV all with Zenith 1115 Carburetor. (Part No: BK9AV) $29.73

Carburetor Kit, Comprehensive - Fits Zenith carburetor 8808. Fits tractor model A, and B. (Part No: C508V) $38.10

Carburetor Kit, Comprehensive - Fits Zenith carburetor 9752 and International 52499D. For tractor models A, B, Super A, AV. (Part No: C509V) $41.62

Carburetor Kit, Comprehensive - For A, AV, B, Super A, all with Zenith Carb #10514A. Contains the following parts for a Major Overhaul with instructions. Includes: gaskets, needles, seats, shafts, springs, and mixture screw. Does not include float. (Part No: ZCK28) $38.73

Carburetor Kit, Comprehensive - For A, B, Super A with Marvel-Schebler TSX159 and TSX422 and IH # 69401D. Contains the following parts for a Major Overhaul with instructions: gaskets, needles, seats, shafts, springs, and mixture screw. (Part No: MSCK23) $31.90

Carburetor, New - Carburetor assembly for C113 gas engine. Replacement for Marvel-Schebler TSX156, TSX157, TSX319, no longer supplied by OEM. Can replace carburetors:52499DB, 69401D, 352376R92, 354184R93m 355485R91, 373957R91. The mounting studs measure 2-3/8" center to center. Service with BK27 or BK27V basic repair kit or C547 complete For A, B, Super A. (Part No: TSX157) $193.15

Carburetor, New - Black Cast Carburetor assembly for C113 gas engine. Replacement for Marvel-Schebler TSX156, TSX157, TSX319, no longer supplied by OEM. Can replace carburetors:52499DB, 69401D, 352376R92, 354184R93m 355485R91, 373957R91. The mounting studs measure 2-3/8" center to center. Service with BK27 or BK27V basic repair kit or C547 complete For A, B, Super A. (Part No: TSX157_Black) $287.05

Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: A, Super A, Super C, AV, B. New Zenith replaces Marvel TSX157, Carter UT7335. Center-to-center on the two mounting bolt 2 3/8 inches. Made in USA, 1 year warranty. (Part No: 14007) $282.48

Carburetor, New - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: A, B, C, 130, 140, 240. 230, 330, 340, 404, T340 Crawler, TC5 skidder, TS5 crawler, U-2, Replaces Marvel Schebler TSX156, TSX157, TSX171, TSX198, TSX319, TSX333, TSX348, TSX730, TSX744, TSX748, TSX827, TSX926, TSXC113, TSXC123, TSX94, TSXU828, TSXU829, TSXU831, TSXU832. Zenith 12225, 12285 Replaces Farmall International part #s: 372985R92, 69404D, 352047R91, 96401D, 69402D Center to center on the 2 mounting studs is 2 5/16 inches. This carburetor comes with studs that attach to carburetor. This will not work in those applications that studs must be used in the manifold. 2-5/16" center to center on mounting bolts. Made in USA, 1 year warranty. (Part No: 12522) $288.37

Carburetor, Rebuilt - Fits A, B, Super A - replacement for OEM 9749, 9167, 9752. Add $75.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1403-CARB) $157.71

Carburetor, Rebuilt - Fits A, B, C, Super A - replacement for OEM UT7335. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1404-CARB) $157.71

Carburetor, Rebuilt - Fits A, B, C, Super C, 100, 130, 140, 200, 230 - replacement for OEM (C113, C123 ENGINE) 12613A, 10514. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1405-CARB) $157.71

Carburetor, Rebuilt - Fits A, B, C - replacement for OEM TSX157, TSX156. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1411-CARB) $157.71

Carburetor, Rebuilt - Fits A, B, C - replacement for OEM 10386. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1406-CARB) $157.71

Fuel Cap - For A, Super A, AV, B, BN, C, Super C, H, Super H, M, Super M, Super MTA, Cub, Cub Lo-Boy, 100, 130, 200, 230, 300, 350, 400, 450. Tall Cap is 2 1/2 inches tall, Triple Baffle Style. (Part No: R3654) $28.21

Fuel Cap - Black - (Vented) - Black Fuel Cap. REPLACES : 361910R91, 538063R1, 224839C91, 224839C92. Fits MOST: A, C, Cub, Cub Lo-Boy, Cub 185-Lo-Boy, H, M, MD, Super A, Super C, Super H, Super M, Super W4, Super W6, W6, W9, 100, 130, 140, 184, 200, 230, 300, 330, 340, 350, 400, 403, 404, 424, 444, 450, 460, 503, 504, 544, 560, 606, 615, 656, 706, 715, 756, 766, 806, 815, 826, 856, 915, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1640, 1660, 1670, 1680, 2404, 2424, 2444, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2856, 4156, 4166, 4186. Cap fits neck inside diameter of 1 7/8 inches using 2 locking tabs. (Part No: 23995DC) $6.68

Fuel Cap, Chrome, Unvented - Fits MOST of the following GAS and Diesel tractors: Cub, Cub Lo-Boy, A, Super A, B, C, Super C, H, Super H, M, Super M, 04, 06, W4, W6, Super W4, Super W6, W9, 100, 130, 140, 4156, 4166, 4168. Cap fits neck inside diameter of 1 7/8 inches using 2 locking tabs. (Part No: 23995DC-CHROME) $8.17

Fuel Cap, Top Vented - 2-11/16" I.D., 1.500" height (including splash guard) and 1.118" height. Says "Buy Clean Fuel Keep it Clean". For tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy (-(WILL NOT FIT 154, 184, 185)-), F12, F14, F20, F30, H, HV, I4, I6, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MV, Super W4, Super W6, Super WD9, Super WDR9, T4, T5, T6, T9, TD14, TD14A, TD15, TD18, TD18A, TD20, TD6, TD9. (Part No: 12770D) $10.65

Fuel Cap, Vented - For MOST Models: A, Super A, B, C, Super C, H, Super H, M, Super M, Cub, 100, 130, 200, 230, 300, 350, 400, 450. Says Buy Clean Fuel . Cap fits neck inside diameter of 1 7/8 inches using 2 locking tabs. Replaces IHS226, AR369R, AD709R, AH83351, B824, 7A824, 161945A, 30-3049558. (Part No: 23995DA) $8.42

Fuel Line - Pipe, fuel strainer to carburetor with two nuts. For tractor models A SN# 501 to 41329, B SN# 501 to 40192. (Part No: 51498DX) $25.11

Fuel Line With fittings - Buna-N flex gas line. Buna -N gas lines easily flex, eliminates metal tubing, vibration. For 100, 130, 200, 230, A, B, C, Super C, Super A (Part No: FLA15) $19.44

Pre-Cleaner Assembly - Complete, glass dust bowl assembly, 1-3/8" I.D. base, just like the original. For tractor models A, Cub, B, Super A (to SN# 355669). (Part No: 356254R91) $48.30

Pre-Cleaner Assembly - Complete, glass dust bowl assembly, 1- 3/4" I.D. base, just like the original. For tractor models A, Cub, B, Super A, 100, 130, 140, Super C, 200, 230, 240, 340. Replaces: 352612R91 (Part No: 352612R9) $48.30

Pre-Cleaner Bowl - Glass bowl for pre-cleaner assembly 335261R91, 356254R91. (Just like the original). Tractors: Super A (SN# 356001 & up), Super A-1, C, Super C, 100. 130, 140, 200, 230, 240, 340, A, Cub, B, Super A (up to SN# 355669). (Part No: 64178D) $26.99

Sediment Bowl Assembly - For Cub, Cub Lo-Boy, A, B, Super A, AV AI, AV1, C, Super C, 100, 130, 140, 154, 184, 185, 184 Cub, Cub 185 Lo-Boy, 230, 2400A, 2404, 2500A, 2504, 2606, 2656, 340, 404, 454, 460, 464, 504, 574, 606, 656, 674, 884. Fuel Strainer Assembly with 3/8" pipe connection to tank, 1/8" pipe outlet. Replaces 38465D. (Part No: 61782C91) $15.98

Sediment Bowl Assembly, Dual Tank - For tractors using two tanks. 3/8" pipe inlet, 5/16" compression outlets x 2. For tractor models A, B, BN, C, I4, I6, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, (H, HV SN# 50866 & up), (M SN# 24215 & up), (MV SN# 24215 & up), (O4, W4 SN# 1130 & up), (O6 SN# 1317 & up), (W6 SN# 1317 & up) with Distillate or All Fuel. Replaces 370831R91, 51495DD, 58361DAX, IHS713. YOU MAY NEED A 90 DEGREE ELBOW - NOT SUPPLIED BY YESTERDAYS TRACTOR. (Part No: 17215DA) $66.93

Throttle Control Assembly - For A, B, BN. Throttle Control Assembly. (Part No: 48259DX) $48.45

Throttle Lever - For Farmall A, B and BN (Part No: 48260DA) $16.28

Gauges

Amp Gauge - 20-20 Style - with IHC Logo For A, B, C, H, M, W-4, W-6, W-9(To 1946) (Part No: R4186) $25.99

Amp gauge - Gauge, ammeter has 20-0-20 range. Original style with IH logo. Fits 2" dia. hole, stainless steel bezel, black background, white letters and white pinter for tractors: Cub, A, B, Super A, A1, AV, AV1, C, Super C, H, HV, Super H, HV, M, MV, MDV, MD, Super M, MTA, O-4, OS-4, O-6, OS-6, W4, W6, WD-6, W-9, WR-9, WDR-9. Replaces 725-3023, 925-3141, IHS418. (Part No: 354473R91) $8.23

Oil Gauge - PRESSURE GAUGE For 100, 200, 230, A, B, C. This type screws straight into block. Has IH Logo. (Part No: 43987DB-B) $68.85

Oil Gauge - Oil pressure gauge, 80 pound, fits 2 diameter hole. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, W4, 400, W6, W9, A, B, C, H, M, Super C, Super W9, Super A. (Part No: 536962R1) $10.79

Water Temp Gauge - 14 inch Lead - with IHC Logo For A, B (To 1946). Replaces: 63783D (Part No: R4180) $47.13

Water Temp Gauge - 16 inch Lead - with IH Logo For A, Super A, B (From 1947). Replaces: 67135D (Part No: R4181) $45.33

Water Temperature Gauge - For A, B, H, M, W-4, W-6, W-9 all to 1946. Water Temperature Gauge with 19" Lead, "IHC" Logo. (R3695) (Part No: 63783D) $45.89

Water Temperature Gauge with IH Logo - TEMPERATURE GAUGE WITH 19 inch LEAD & IH Logo. FITS MODELS A, H, M, Super A, Super M (300, 350 UTILITY). Fitting may require the OEM Adapter 51510D which we do not have available. (Part No: 67135D) $57.33

Hitch / Drawbar

Fixed Drawbar - For model A. (Part No: R4216) $199.19

Hydraulic System

Hydraulic Pump - For tractor models A, AV, Super A, Super AV, Super C, C, 100, 130, 140, 200, 230. Also Replaces OEM# 360689R91 & 360945R91 (Part No: 384506R94) $419.04

Lights

Headlight Assembly, Teardrop - 6 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5 inches in diameter. Price is for one headlamp assembly. Does not include mounting bracket. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super C, Super H, Super M, Super W4, Super W6, Super A, W4, W6, W9, WD6, WD9. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Part No: 45640DB) $43.05

Headlight Lens - Replacement Glass Lens is 4.75 inch outside diameter for IH (45640DB) Headlight Assemblies. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super W4, Super W6, W4, W6, W9, WD6, WD9. (Part No: GC200) $12.46

Headlight Trim Ring - Moulding trim ring for 5 inch teardrop headlights or rear lights on tractors (painted). For tractor models 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, 450, 600, 650, A, AV, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super C, Super H, Super HV, Super M, Super MD, Super MTA, Super WD9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S. (Part No: 53525DA) $19.11

Light Clamp - Clamp, lamp assembly for tractors. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super C, Super H, Super M, Super W6, Super A, W4, W6, W9, WD6, WD9. (Part No: 350920R1) $6.38

Light Switch Knob - Old style for rotary light switches. For tractor models A, AV, B, BN, C, H, HV, M, MD, MV, MDV, W4, W6, W9, WD6, WD9, WR9, WDR9, O4, OS4, I4, I6, I9, ID6, ID9, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super MV, Super MDV, Super MTA, Super W4, Super W6, Super W6TA, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, Cub. (Part No: 57313D) $10.50

Light Switch, 12 Volt - 4 position with Old style knob, replaces cut out switch when converted to regulator. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5362) $48.34

Light Switch, 12 Volt - 3 position with Old style knob, with regulator only. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5364) $47.62

Light Switch, 12 Volt - 4 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5366) $48.34

Light Switch, 12 Volt - 3 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5368) $48.34

Light Switch, 6 Volt - 4 position with Old style knob, replaces cut out switch when converted to regulator. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5361) $48.34

Light Switch, 6 Volt - 3 position with Old style knob, with regulator only. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5363) $46.73

Light Switch, 6 Volt - 4 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5365) $48.34

Light Switch, 6 Volt - 3 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5367) $48.34

Rear Combo Light - 6 Volt Rear Combo Light Assembly with Red Jewel Light with rotary switch. For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. Replaces 355914R91. (Part No: 355911R91) $63.44

Sealed Beam Assembly - 6 Volt For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230, 240. (Part No: R2714) $52.03

Sealed Beam Bulb, Red & White - 4.5" dia. For tractor models Cub, Cub Lo-Boy, A, Super A, C, Super C, H, Super H, M, Super M, 100, 130, 200, 230, 300, 330, 340, 350, 400, 450. (Part No: 371461R92) $20.23

Switch, Worklight, with Knob - For tractor models Cub, Cub Lo-Boy, A, Super A, C, Super C, H, Super H, M, Super M, 100, 130, 200, 230, 300, 330, 340, 350, 400, 450. Replaces 359682R91. (Part No: 375653R92) $14.67

Tail Light Lens - 5 Inch Lens, combination rear light and tail light. For 100, 130, 200, 230, 300, 340, 350, A, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super M, Super MTA, Super W4, Super W6, Super WD6, Super A (Part No: 350478R1) $12.46

Wiring Harness, Lights - For lights on on the following tractors: Models A and B. Manufactured to restoration standards. (Part No: 51998D) $104.00

Oil System

Oil Fill Breather Cap, NO Clip - 3-1/4" tall (says "OIL"). Fits A, Super A, B, C, Super C, 200, 300. (Part No: R4459) $38.59

Oil Fill Breather Cap, With Clip - 3-1/4" tall (says "OIL"). Fits A, Super A, B, C, Super C, 200, 300. (Part No: R4458) $38.59

Oil Filter - Oil filter element, cartridge type with gasket. For gas engines: C113, C152, C248, C264, C281, in tractors: A & AV to SN# 97397, B & BN to SN# 97397, H & HV tp SN# 121021, M & MV SN# 59394 and up, Super M & MTA, 4 & W4 to 4957. 6 & W6 SN# For 4, 400, 450, 6, A, AV, B, BN, H, HV, M, MTA, MV, Super M, Super MTA, Super W6, W4, W400, W450, W6. Element is 3 1/4 inches in diameter and 7 1/2 inch overall length. (Part No: 376375R91) $9.78

Oil Filter - Oil filter element, cartridge type with gasket. Filter is 3.5 inches diameter with overall length of 5.5 inches. For gas engines: C113, C123, C135, C146, C152, C164, C169, C175. For 100, 130, 140, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 350, 404, 424, 444, 504, A, AV, B, BN, C, H, HV, Super AV, Super C, Super H, Super HV, Super W4, Super A, W4. (Part No: 376374R91) $7.03

Oil Filter - For A, AV SN# 97398-up, Super A, AV, B, BN SN# 97398-up, Super C, 100, 130, 140, 200, 230, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504(gas engines C113, C123, C135, C146, C153). Spin on type. (Part No: 538836R1) $8.64

Oil Filters, Tri Pack - Package of three oil filter elements, cartridge type with gasket. Filter is 3.5 inches diameter with overall length of 5.5 inches. For gas engines: C113, C123, C135, C146, C152, C164, C169, C175. For tractor models 100, 130, 140, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 350, 404, 424, 444, 504, A, AV, B, BN, C, H, HV, Super AV, Super C, Super H, Super HV, Super W4, Super A, W4. (Part No: 376374R91TRIPAC) $24.03

Oil Filters, Tri Pack - Package of three oil filter elements, cartridge type with gasket. For gas engines: C113, C152, C248, C264, C281, in tractors: A & AV to SN# 97397, B & BN to SN# 97397, H & HV tp SN# 121021, M & MV SN# 59394 and up, Super M & MTA, 4 & W4 to 4957. 6 & W6 SN# For 4, 400, 450, 6, A, AV, B, BN, H, HV, M, MTA, MV, Super M, Super MTA, Super W6, W4, W400, W450, W6. Element is 3 1/4 inches in diameter and 7 1/2 inch overall length. (Part No: 376375R91TRIPAC) $35.15

PTO / Driveline

PTO Safety Shield - For A, B SN# 19975 & up, Super A, AV, C, Super C. PTO Safety Shield for tractor models without belt pulley. Restoration Quality. (Part No: 55403DA) $73.17

PTO Seal - Single Lip Style. For tractor models A, B, C, Super A, Super B, Super C, 100, 130, 140, 200, 230, 240. Replaces 71719C1. I.D.-1.375" O.D.-2.506" Width - .372" (Part No: 48114D) $17.67

PTO Shaft - For A, AV, AV1, A1, B, C, Super A, Super C, 100, 130, 140, 200, 240, 300. PTO Shaft 540 RPM. 9.750" Long. (Part No: 66184DA) $124.86

PTO Shaft Guard with Clamp - For A, B, Super A, Super AV, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, 100, 130, 140, 200, 230, 240, 504, 544, 606 and with transmission driven type tractors: 330, 330, 350, 400, 450. PTO safety guard. (Part No: 51484DX) $13.97

PTO Shaft Seal, Rear - Fits A, AV, B, BN, C, Super A, Super A1, Super AV, Super AV1, Super C, 100, 130, 140, 200, 230, 240. Replaces 358816R91, 358776R91. (Part No: 71719C1) $11.41

PTO Shield - For tractor models A, B, Super A, Super AV, C, Super C. PTO Shield for tractor models with Belt Pulley. (Part No: 55398DA) $60.83

PTO Shield, RESTORATION QUALITY - For A, B, Super A, AV, C, Super C. PTO Shield for tractor models with Belt Pulley. RESTORATION QUALITY. (Part No: 55398DA-R) $104.90

Paint

Dakota Prep & Shine, Twin Pack - Kit inlcudes (1) 16.oz bottle Dakota Prep with spray nozzle, (1) 16 oz. aerosol can Dakota Shine, (2) scrub pads (1) light, (1) aggresive. (Part No: DS2PK) $38.25

Seats

Leaf Spring, Seat, LH - For tractor models A, Super A, A1, Super A1, AV, Super AV, AV1, Super AV1, B, 100, 130, 140, 444, 2444. (Part No: 50586DB) $30.15

Leaf Spring, Seat, RH - For tractor models A, Super A, A1, Super A1, AV, Super AV, AV1, Super AV1, B, 100, 130, 140, 444, 2444. (Part No: 50587DB) $30.15

Pan Seat Flip over with lock Rod - RED AND WHITE Vinyl Pan Seat, Flip over seat with lock Rod. Like Original Seat, Complete With Lock. Fits A, B, BN, & Super A. (Part No: 50570DC) $197.36

Pan Seat Flip over with lock Rod - Silver Vinyl Pan Seat, Flip over seat with lock Rod. Like Original Seat, Complete With Lock. Fits A, B, BN, & Super A. Replaces 50570DC. (Part No: 50570DC_SILVER) $219.11

Seat Back - Silver Canvas on Wood For A, Super A, B, Cub, Cub Lo-Boy, F100, F130, F140, F203, F303, F315 (Part No: R3656) $43.54

Seat Bottom - Silver Canvas on Wood For A, Super A, B, Cub, Cub Lo-Boy, F100, F130, F140, F203, F303, F315 (Part No: R3655) $59.61

Seat Cushion, Back, Black - 6 INCHES, BLK VINYL. Fits Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 220, 100, 130, 140, 203, 300, 303, 315, 330 UTIILITY, 350, 403, 460, 503 2429>, A, ALL COTTON PICKERS, B, Super A, 212 IND/CONST. (Part No: 363219R91-1) $40.68

Seat Cushion, Base, Black - Wood Base, Black Vinyl. Fits Cub, Cub 154 Lo-Boy, 220, 100, 130, 140, 203, 300, 303, 315, 330 UTIILITY, 350, 403, 460, 503 2429>, A, ALL COTTON PICKERS, B, Super A, 212 IND/CONST. (Part No: 363220R91-1) $57.56

Sheet Metal / Body Parts

Battery Box Cover - For A, AV, B. Cover, Battery Box Hold Down. Restoration Quality. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 50937DX_) $38.56

Battery Box with Lid - Battery Box - With lid. NEAR Restoration Quality. Inside dimensions: 7-1/8" wide x 9" tall x 9" long. Use Battery Hold Down Rubber (P/N R5103) to complete the installation. For A, B, BN. Replaces OEM# 50943DX (Part No: 50943DX) $124.64

Battery Hold Down Rubber - 3/4" tall, inserts into the retainers in the battery box lid. For tractor models Cub, Cub Lo-Boy, A, AV, B, (BN, C 51690D), AI, H, HV, M, MV, MD, MDV, W6, W9, WD6, Super A, Super C, Super H, Super HV, Super M, Super MTA, Super W6, 100, 130, 140, 200, 230, 600, 650. Replaces: 51690D (Part No: R5103) $6.30

Fender - For A, B. Fender, does not include bracket. Add $10 each to shipping charges due to size/weight. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 51179DX) $113.85

Grill Bottom Panel - For A SN# 41330 and up, Super A and Super A1 (Part No: IHS312) $193.20

Grill Screen - Original 3/16" Wire Mesh sheet. Each 24" x 36" sheet is made of original thickness wire & includes clips. Cut sheet to appropriate grill screen size for your tractor. For Farmall models A thru 450. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: R4476) $27.67

J-Hook Kit - J-Hook Kit for Hood 58144DX or 58145DX. (Part No: R5046) $57.82

Pedal Guard - For A, BN, Super A, 100, 130, 140, all without Foot Accelerator. Pedal Guard is 17 1/2" long without grease hole and painted red. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 48697DB) $42.45

Toolbox OEM Replacement - For tractor models A, Super A, B, 100, 130, 140. Toolbox. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 43527DAX) $86.98

Steering

Spindle Bushing - For tractor models 100, 130, 140, A, A1, (AV, AV1 with fixed or adjustable front axle), Super A. (Part No: 356609R1) $14.01

Spindle, Left or Right - For tractor models A, AI, Super A. (Part No: 350603R91) $177.65

Steering Sector Shaft - Tapered shaft measures 3/16" keyway at gear end (straight end). Measures 1/4" wide keyway at the tapered end. For tractor models A (some), Super A, 100, 130. (Part No: 356549R1) $89.01

Steering Sector Shaft - Square end for for steering arm. For tractor models A, AV, Super A, Super AV, IA, ISA. (Part No: 47683DB) $115.92

Steering Shaft Support Knuckle - Knuckle with Grease Zerk for steering shaft.For tractor models A, A-I, AV, B, BN, Super A, Super A-1, Super AV, 100, 130, 140. Replaces 8329DX, 365002R11, 9442DX, 6852DX, IHS964. (Part No: 9442DX) $34.17

Steering Wheel - 16" dia, 3/4" keyed hub, 3 covered spokes. For tractor models (F12, F14, F20, F30, A, B, H, M all early from 1937-1940). (Part No: 29118DC) $62.44

Steering Wheel - 14-3/4" diameter, 3/4" hub, for keyed shaft. For Cub, A & Super A to SN# 355669, B & C to SN# 75097. Bare Metal Spokes. (Part No: 60069D-OE) $32.84

Tie Rod End - For tractor models A, AV, B, BN, C, Super C, (Super A, Super AV SN# 250001-3318309). Replaces 57875D, 43468D. (Part No: 48280DB) $52.09

Wheels

Bearing Cone - Outer cone for bearing kit FW101FS. For tractor models A, Super A, B, C, Super C, 100, 130, 200, 230. For 100, 130, 200, 230, A, B, C, Super C, Super A. (Part No: 13823V) $9.09

Bearing Cone - Inner cone for bearing kit FW101FS. For tractors A, Super A, B, C, Super C, 100, 130, 200, 230. For 100, 130, 200, 230, A, B, C, Super C, Super A (Part No: 54631H) $7.86

Bearing Cone, Wheel - For tractor models 100, 130, (140 with cast wheels), 200, 230, A, A1, (AV, AV1, with fixed or adj. wheels), B, C, Super A. (Part No: 09074) $9.09

Clamp Lock Nut - Wheel Clamp Lock Nut. 5/8-18 thread. Fits front wheel on tractors: A, B, C, 100, 130, 200, 230, 240, 330, 340. For 100, 130, 200, 230, 240, 330, 340, A, B, C (Part No: LN10-1) $13.47

Front Rim - Adjustable, blank front rim (no center). 3 x 15, with 3 loops. For tractor models A, Super A, Super A1 B and C and Super C, 100, 130, 140, 200, 230 with Adjustable Tread Wheels. Add additional $10.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 57095D) $58.15

Front Rim - Models A, B, C - Blank front rim (no center). 3" x 15", no loops. For tractor models A, B and C. Add additional $10.00 shipping due to weight. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: R2057) $52.28

Oil Seal - Outer cup for bearing kit FW101FS. For tractor models A, Super A, B, C, Super C, 100, 130, 200, 230. For 100, 130, 200, 230, A, B, C, Super C, Super A. (Part No: 43463D) $11.85

Rear Rim - For A, Super A, B, C, 100, 130, & 140. 9" X 24" With Four Mounting Lugs. Replaces 56205DB. Add $15.00 For Shipping Due To Weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 114713C1) $137.13

Rear Rim 10 x 24 - Four Loop Rear Rim for A, B, BN, Super A, 100, 130, 140, 240, and others. Also replaces 354876R91 and 374807R91. Verify correct size. Do simply use tire size to determine rim size. 14.5 inch center to center on loops. Valve stem hole is on side closest to loops. Add additional $20.00 shipping due to weight. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: 56206DA) $135.42

Wheel Bearing Kit - For tractor models A, AI, B, C, Super A, 100, 130, 200, 230, 140 with Cast wheels, (AV, AV1 ALL with Fixed or ADJ. Front). Parts include OEM numbers: 15118(Cone), 15250B(Cup), 09074(Cone), 09196(Cup), 49118DA(Felt Seal), 55453D(Felt Seal), 49117D(Seal Retainer), 43463D(Seal). (Part No: WBKIH10) $35.29

Universal Parts and Accessories
Category: Brakes

Brakes

Brake Rivet Tool - Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1/4" throat, 1/8" dia. rivet punch. (Part No: RIVET_TOOL) $33.61

Brake Rivet Tool, Large - Larger version of our Brake rivet tool. 3-3/8" deep throat x 2-1/8" high throat. Includes 1 punch for brake shoe rivets and 1 punch for clutch pulley brake. (Part No: LGRIVET) $95.23

Cooling System

Magnetic Block Heater - Universal. 115-120 AC, 180 watts, draws 2 amp maximum. Surface area 2-3/4 inches x 3-3/4 inches, delivers 300-400 degrees surface temperature. (Part No: MBH1153) $60.71

Zip Leak - Industrial Radiator Stop Leak - A professional strength stop leak for tractors, trucks and construction equipment. Designed for large, heavy duty cooling systems. 5 oz. Bottle. Instructions/Usage: For average antique tractors (120-160 CID engines) use 1/4 bottle for 15 minutes, if the leak fails to stop, add an additional table spoon. (Part No: Z14012) $10.49

Decals and Emblems

Decal, Fear This IH - Black and red, 12-1/2 x 3-3/4. For all Models. (Part No: S.67826) $14.10

Decal, IH Block - "IH" logo, 11". (Part No: R4682) $22.79

Decal, IH Block - "IH", 3" x 3 1/4" Block. (Part No: R4681) $8.15

Decal, IH Block - "IH" logo, 1 3/4". (Part No: R4680) $6.51

Decal, IH Block - "IH", 1 1/4" Logo . (Part No: R4679) $4.89

Decal, IH Block - "IH" logo, 7" printed on vinyl. (Part No: R5171) $27.83

Decal, IH Block - "IH" logo, 8" printed on vinyl. (Part No: R5172) $25.52

Decal, IH Block - "IH" logo, 10". (Part No: R5173) $29.33

Decal, IH Block - "IH" logo no background, 1" printed on vinyl. (Part No: R5174) $3.26

Decal, IH Block - "IH" logo no background, 1-5/8" printed on vinyl. (Part No: R5175) $4.89

Decal, IH Block - "IH" logo no background, 2" x 2-1/2" printed on vinyl. (Part No: R5176) $6.51

Decal, IH Block - "IH" logo no background, 3" x 3-1/2" printed on vinyl. (Part No: R5177) $16.28

Decal, IH Block - "IH" logo no background, 4-1/2" x 4-3/4" printed on vinyl. (Part No: R5178) $9.77

Decal, IH Block - "IH" logo no background, 5-1/2" x 6" printed on vinyl. (Part No: R5179) $9.77

Decal, IH Block - "IH" logo no background, 6-1/2" x 7". (Part No: R5180) $16.28

Decal, IH Block - "IH" logo no background, 7-1/2" x 8". (Part No: R5181) $19.53

Decal, IH Block - "IH" logo on silver background, 2" x 2-1/4". (Part No: R5182) $6.51

Decal, IH Block - "IH" logo no background, 10" x 11". (Part No: R5183) $21.65

International Decal - 8-1/2" long, white with black outline. (Part No: R0679) $9.77

International Decal - 23" long, black block letters. (Part No: R0680) $16.28

International Decal - 23" long, white with black outline. (Part No: R0681) $19.53

International Decal - 26" long, black block letters. (Part No: R0682) $19.53

International Decal - 26" long, white with black outline. (Part No: R0683) $21.65

International Decal - 29" long, black block letters. (Part No: R0684) $21.65

International Decal - 29" long, white with black outline. (Part No: R0685) $24.74

Drive Train

Lucas Hub Oil (quart) - Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Part No: LU10088) $9.69

Electrical System

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. NOTE

Alternator Base Bracket Kit - Universal - Universal base bracket mounting kit. For converting from a generator to an alternator . Contains: brackets, bolts, washers, nuts & Basic Instructions. (Part No: 2348258) $34.60

Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 8NE10305SE) $68.93

Battery Thermal Wrap - 60 Watt, 28 inch long wrap to keep your battery warm. (Part No: BTW28) $35.98

Battery Thermal Wrap - 80 Watt, 36 inch long wrap to keep your battery warm. (Part No: BTW36) $37.48

Battery Thermal Wrap - 160 Watt, 36 inch long wrap to keep your battery warm. (Part No: BTW72) $53.81

Coil Bracket - Universal Coil Bracket (Part No: R1940) $6.94

Coil, High Performance (Black), 12 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40611) $45.15

Coil, High Performance (Black), 12 Volt, Oil Filled - Pertronix Flame Thrower heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40511) $35.82

Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. (Part No: 40011) $35.82

Coil, High Performance (Chrome), 12 Volt, Oil Filled - 12-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40501) $40.25

Coil, High Performance (Chrome), 6 Volt, Oil Filled - 6-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40001) $40.25

Coil, Ultra High Performance (Black), Oil Filled - Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45011) $39.44

Coil, Ultra High Performance (Chrome), Oil Filled - Pertronix Flame Thrower II Chrome, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system using "Ignitor II". Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45001) $44.38

Magneto Winding J4 - For tractors using a J-4 Magneto. (Part No: 352355R91) $77.71

Magneto, Wico XH & XHD, Service & Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Part No: MAG6) $15.25

Spark Plug - Extended tip, 14mm thread, 3/4" reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65) $2.73

Spark Plug - Extended tip, 14mm thread, 3/8" reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85) $2.73

Spark Plug - Standard tip, 7/8"-18 thread, 5/8" reach. Replaces Champion W10, W14, W18. NOTE: Verify spark plug type before ordering. (Part No: AL3076) $4.63

Spark Plug Wire Set, 4 Cylinder, Universal - For use with Ignitor II high performance electronic ignition conversion kits. (Part No: S.66442) $11.98

Spark Plug Wire Set, Universal - 6 Cyl. - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260) $15.00

Spark Plug Wire Set, Universal, 4 Cyl. - Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. Made in the USA. (Part No: CPN12259) $13.59

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651. NOTE

Starter Solenoid - For 6 volt, replaces delco 1465. (Part No: 142364HA) $14.98

Starter Solenoid - 12 volt starter solenoid. (Part No: DR1467) $16.23

Starter, Generator Tag, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO12) $14.31

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO6) $14.31

Stripper and Crimping Tool - Professional Fast and Easy tool for stripping and crimping electrical wires. (Part No: B1SB6718) $21.20

Voltage Regulator, 12 Volt - 4-terminal flat mount. Fits most 12V tractors and combines prior to 1957. (Part No: AT11855) $42.37

Engine Gaskets

Silicone Black RTV - Permatex black RTV silicone adhesive sealant. Provides a waterproof seal around metal, glass, rubber. Designed for indoor or outdoor use, 3 oz. tube. (Part No: PRM16BR) $5.43

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, Oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75� F to +500� F, 3.35 oz. tube. (Part No: PRM77BR) $5.99

Silicone Copper RTV - Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicones. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75� F to +700� F, 3 oz. tube. (Part No: PRM101BR) $9.11

Engine Rebuild Kits

Lucas Assembly Lube - Lucas Assembly Lube (4 oz). Designed to be used as an initial lubricant to metal surfaces. It mixes with any oil and will not plug filters. This product clings to all surfaces and is an excellent rust inhibitor, allowing long term storage for all parts. It�s useful wherever tension or torque is applied. Key Benefits are: Use to pre lube camshaft, bearings, lifters and valve train. Prevents seizing, galling and scuffing perfect for engine lding, super slick and tacky, easy to use, excellent rust inhibitor, excellent for long term storage, contains Zinc, Moly and other extreme pressure additives for maximum protection during engine break-in. (Part No: 10152) $7.18

Engine Parts

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). NOTE

Engine Pistons and Sleeves

Piston Groove Cleaner - For pistons up to 5 1/2 inches. Cleans grooves of 5/64, 3/32, 1/8, 5/32 and 3/16. (Part No: B1SB9055) $29.26

Piston Ring Compressor - Ratchet mechanism with square drive tool to adjust diameter and enlarged crimped edge to prevent compressor from entering cylinder. Depth 6 1/2 inches. Range 3 1/2 to 7 inches. (Part No: 900521) $38.17

Ridge Reamer - Heavy Duty Ridge Reamer. Removes ridges from the top of the cylinder to achieve smooth wall surface on engine bores from 3 to 5 inches. Tungsten carbide blade is reversible for long life. (Part No: 500560) $68.34

Engine Rings

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32"). NOTE

Exhaust System

Chrome Exhaust Stacks - Universal. Available from 2 to 5 inch inside Diameter. 48 to 53 inch length. Curved top on all sizes. Extended curver available on some sizes. Priced from $69.95. Single wall construction. Chrome Exhaust Clamps are $5.00 each when ordered with a pipe. Call for pricing for the size you need 800-853-2651 NOTE

Rain Cap - This rain cap is for a 1.750 inch pipe. (Part No: R1799) $5.32

Rain Cap - This rain cap is for a 2.0 inch pipe. (Part No: R1800) $6.30

Rain Cap - This rain cap is for a 2.25 inch pipe. (Part No: R1801) $5.83

Rain Cap - This rain cap is for a 2.50 inch pipe. (Part No: R1802) $6.38

Rain Cap - This rain cap is for a 2.750 inch pipe. (Part No: R1804) $10.61

Rain Cap - This rain cap is for a 3.0 inch pipe. (Part No: R1805) $5.99

Rain Cap - This rain cap is for a 3.50 inch pipe. (Part No: R1806) $11.99

Rain Cap - This rain cap is for a 4.0 inch pipe. (Part No: R1807) $8.83

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2" x 3-1/4". (Part No: S.43231) $9.90

Carburetor Fuel Line Fitting With Strainer - Fits carburetor 356948R92, 35865R91, 366066R91, 367258R92, 367259R92, 372723R92, 378196R94, 379813R91, 380956R91, 381984R91, 388297R92, 388424R92, 388425R96, 390082R92, 396197R93, 45108DB, 45108DC, 50981DA, 50981DB, 50983DB, 52714D, 52814DA, 52815D, 52815DA, 533622R91, 53873DF, 53873DH, 539575R91, 56543DE, 60329DA (Part No: 29902DX) $24.60

Choke Cable - Universal choke cable 72 inch long, 7/16 inch thread dia. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: CC72) $11.58

Fuel Filter, In-Line, 1/4 inch - Inlet 1/4, outlet 1/4, O.D. 1-29/32, length 4-1/16. (Part No: 6511393) $5.19

Fuel Filter, In-Line, 3/8 inch - Inlet 3/8, outlet 3/8, O.D. 1-29/32, length 3-7/8. (Part No: BF836) $6.72

Fuel Filter, In-Line, 5/16 inch - Inlet 5/16, outlet 5/16, O.D. 1-29/32, length 4-5/32. (Part No: BF840) $2.28

Fuel Filter, In-Line, 5/16 inch, Clear - Inlet 5/16, outlet 5/16, O.D. 2-1/8, length 3-21/32. (Part No: BF7736) $6.36

Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043) $31.49

Fuel Tank Liner Kit - Works on all metal gas tanks, use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259) $75.20

Fuel Tank Repair Kit - Permanent hole and crack repair for metal fuel tanks in 30 minutes. Kit includes instructions and materials needed to fix cracks up to 4" long and holes up to 3/8" in diameter. NOT for plastic fuel tanks. (Part No: FTR180) $21.03

Fuel Tank Webbing, 3 Ft - Black woven nylon type material, .042" thick, 3 foot section. (Part No: FTW494) $6.39

Lucas Fuel Treatment (quart) - Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Part No: LU10003) $10.67

Main Fuel Valve - Replaces Fuel Solenoid for International Carburetors. These fuel solenoids are very unreliable and can easily be replaced with this manual valve. Contains valve, graphite packing and packing nut. Will not fit Marvel carburetors. If you need for a Marvel, call 800-853-2651 to check availability and pricing. (Part No: 47404DASSY) $29.43

Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8" diameter, 2.150" O.D., Made in the USA. (Part No: C1778R) $2.46

Gaskets

Gasket Material, Cork Rubber - 3/32" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR332) $10.84

Gasket Material, Cork Rubber - 1/16" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR116) $13.81

Gasket Material, Exhaust Manifold - 1/16" thick x 12" wide x 28-1/2" long. Perforated steel core to make manifold gaskets. (Part No: GSKEM1228) $17.72

Gasket Paper, .0160 - .0160" x 18" x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1844) $15.79

Gasket Paper, .0275 - .0275" thick x 18" wide x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1898) $22.72

Gauges

Amp Gauge - With IH logo. 60-0-60. Black face with chrome bezel. (Part No: IHS1837) $29.91

Hourmeter - DC voltages from 12V thru 36V nominal. Heavy duty glass-reinforced polyester body. Internal shock shields & grommets protect movement from shock & vibration damage. Fits 2-1/4" opening, three(3) mounting screws with nuts and two(2) blade terminals included. (Part No: HM771) $46.19

Hourmeter, Analog - 2", black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672) $38.40

Oil Gauge - For all IHC and Farmall tractors up to 1946. Oil Pressure Gauge with color read (no numbers on face). IHC logo on face. (Part No: 43987DB) $68.85

Oil Gauge - For IHC and Farmall tractors 1947 and and up. Oil Pressure Gauge with color band - Includes mounting bracket. Has IH logo on face. (Part No: 41934DB) $64.35

Oil Gauge Copper Line Kit - Universal, for tractors using 1/8 x 6 ft. copper oil line. Includes 6 Ft 1/8 Line, 2 x 5/16 -24 UNF Nuts, 2x Compression sleeves, and a 1/8-27 NPTF Female to 5/16-24 UNF male adapter. (Part No: UNI523) $23.71

Oil Gauge Valve - Oil level indicator (petcock). For all tractors with a 3/8" thread. Oil Gauge Valve for oil pan. (Part No: 1998TAOE) $14.33

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8" pipe thread to 1/8" tube. Brass. (Part No: 919095) $13.27

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8" pipe thread to 1/4" tube. Brass. (Part No: IHS626) $12.72

Oil Pressure Gauge - Universal Complete assembly with oil tube and mounting hardware, Lighted. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Part No: SSW0002) $8.62

Temperature Gauge - Universal water Temperature gauge(0-280 degree scale). Fits tractor model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1/2 inch or 3/4 male adapter, engine block or radiator threaded hole. (Part No: 1042944) $25.52

Temperature Gauge, Universal - For 2" mounting hole. Complete assembly with bracket and adapters for block. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77" capillary line. Fits all liquid cooled engines. (Part No: UTG50) $19.50

Hitch / Drawbar

Center tube, Stablizer - Center tube for SK102CH stabilizer kit. (Part No: SK102CH-CT) $13.66

Check Chain & Pin Kit - Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Part No: CBPN598A) $5.97

Conversion Tong - Two Point Conversion Tong Straight Left Hand Tong With Combination Cat. I & Cat. II Ball For Converting IHC Two Point Fast Hitch To Three Point. About 28 inch overall length. Add $5.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FH1447) $177.50

Conversion Tong - Two Point Conversion Tong Straight Right Hand Tong With Combination Cat. I & Cat. II Ball For Converting IHC Two Point Fast Hitch To Three Point. About 28 inch overall length. Add $5.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FH1448) $177.50

Conversion Tong - Two Point Conversion Tong Bent Type, Left Hand Tong With Combination Cat. I & Cat. II Ball For Converting IHC Two Point Fast Hitch To Three Point.About 32 inch overall length. Add $5.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FH14416) $187.57

Conversion Tong - Two Point Conversion Tong Bent Type, Right Hand Tong With Combination Cat. I & Cat. II Ball For Converting IHC Two Point Fast Hitch To Three Point. About 32 inch overall length. Add $5.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FH14417) $187.57

HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire dia 3/16, length 3.75), four(4) of HP-4 (wire dia 5/32, length 2 15/16), four(4) of HP-5 (wire dia 1/8, length 2 9/16), and three(3) of HP-6 (wire dia 3/32, length 1 5/8). (Part No: HPA15X) $55.09

HITCH BALL 10000LB 2-5/16 - 2-5/16 BALL SIZE, 1-1/4STUD THREAD, 2-1/2 STUD LENGTH, 10000 LB MAX LOAD CAPACIRY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516114) $23.85

HITCH BALL 15000LB 2-5/16 - 2-5/16 BALL SIZE, 1-3/8STUD THREAD, 2-5/8 STUD LENGTH, 15000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516138_) $25.04

HITCH BALL 2000LB - 1-7/8 BALL SIZE, 3/4 STUD THREAD, 1-3/4 STUD LENGTH, 2000 LB MAX LOAD CAPACIRY, ONE CHROME HITCH BALL CLASS. (Part No: CHB17834) $9.23

HITCH BALL 3500LB - Hitch ball. 2" ball size, 3/4" stud thread, 1-7/8" stud length, 3500 lb. max load capacity, one/two chrome hitch ball class. (Part No: CHB234) $9.48

HITCH BALL 5000LB - Hitch ball. 2" ball size, 1" stud thread, 2-1/8" stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21) $10.83

HITCH BALL 5000LB 2-5/16 - Hitch Ball, 2-5/16" ball size, 1" stud thread, 2" stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161) $15.39

Hair Pin Cotter Assortment - Hair Clips sizes from 1/16 x 1 3/8 to 3/16 x 3 1/4. Total of 141 pieces in 6 sizes. (Part No: B1SB16) $29.19

LINCH PIN - Package of 10 linch pins. Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP14) $5.24

LINCH PIN - Package of 10 linch pins. Pin diameter 5/16 inch, useable length 1 1/4 inch, Ring diameter 1 5/8 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP516) $4.28

LINCH PIN - Package of 10 linch pins. 7/16" dia. pin x 1-3/4" useable length, 1-5/8" dia. ring. Enter 1 for package of 10. (Part No: DKLP91) $4.17

LINCH PIN - LINCH PIN Package of 10 linch pins. 3/16" O.D. pin x 1-1/4" Long.***Enter 1 for package of 10** (Part No: DKP316) $4.17

Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8" mounting pins and adapter bushings, 27-1/4" width, 3-1/2"x 3-1/2" beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HF141101) $238.15

Universal Drawbar Lock - For CAT I drawbars only (drawbars that are 1" thick x 2-1/2" width) . Prevents drawbar from rotating. (Part No: 49A29) $19.52

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: DBL2) $22.44

Universal Stabilizer Chain Kit - Chain stabilizers, Turnbuckle & chain links adapt to any size 3-point hitch - usually used on larger tractors - VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed & sold in pairs, less brackets. (Part No: SK102CH) $36.51

Hydraulic System

Hydraulic Parts, Universal - Universal hydraulic parts such as hoses, filters, pressure gauges etc.. can be found in the Accessories and Universal parts section. (Part No: Hydraulic_Parts) $00.00

Implements

AXLE BOLT - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317) $14.00

AXLE BOLT - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317) $14.00

AXLE NUTS (5) - 5 Pack of Axle Nuts. Enter 1 for pack of 5. (Ref 4) Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 15622BH) $1.69

BLADE BOLT KIT - Price is for each bolt with hardware. Must be ordered in quantities of 2. For rotary cutter blade used on rotary cutters. Please verify dimensions before ordering: A = 1 1/8-12 inch, B = 3 1/2 inch, C = 1 3/8 inch, D = 1 inch, E = 9/16 inch, F = 1/2 inch, G = 2 1/2 inch, H = 1.492 (for 1 1/2 Blade Hole), I = 1.12 inches. (Part No: 63607) $12.04

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 170BH) $1.94

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 22) $6.30

Bush Hog Axle Spacer Bushing - Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: SPB40) $4.91

Caster Assembly, Old Style - Tail wheel & hub assembly with grease fitting. 4 x 8 inch rim, 15 inch O.D. of wheel. Includes Wheel, Hub, Axle Bearing, and Bolt Assembly.OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: BH215) $107.75

Graphite Lubricant - Dry Graphite Powder, 5 lb container, used to lubricate planter seed channels. Recommended application rate: 2 oz per box. Typically treats 25-30 acres. (Part No: TP99500GP) $21.25

HUB with BRG CUPS - 4-bolt, 5" bolt circle & 3-5/8" wheel pivot hub with bearing cups (1" axel)(Ref #5). This part fits Caster Assembly (Part Number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1311) $44.80

Hub Assembly - Hub with bushings (3/4"), wheel bolts (4), and grease fitting. Center tube length 5". For rotary cutters: RB60 with new style 1-1/4" dia. caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH) $22.74

Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 221129) $44.70

Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 221129) $44.70

Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Part No: 241100) $77.06

Round Bale Tine 43 Inches - Fully Hardened. (Part No: 241166) $97.46

Round Bale Tine 49 Inches - Fully Hardened. (Part No: 241162) $100.37

Round Bale Tine 55 Inches - Fully Hardened. (Part No: 241163) $109.42

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 30BH) $5.56

Tail Wheel Assembly - 6" x 9" tail wheel assembly with laminated tire, less hub. 4" pilot, 5 bolt holes, 5-1/2" bolt circle. 5-1/4" wide, 21" O.D., 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294) $124.93

Tail Wheel Assembly - 4" x 8" tail wheel assembly with laminated tire. 3-5/8" pilot, 4 bolt holes, 5" bolt circle, 3-3/4" wide, 15" O.D. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 & 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Part No: 500BH) $44.31

Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: TP19000TP) $21.75

Lights

Halogen Work Light-Double Bulb - 12 volt lamp assembly, flood pattern, double bulb 55 watt halogen. Includes replaceable 55 watt halogen bulb. (Part No: L982-12V) $51.42

Headlight Assembly, Teardrop - 6 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Part No: 45640DB) $43.05

Headlight Assembly, Teardrop- 12 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 12-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Part No: 45640DB-12V) $36.90

Light Bulb, Sealed Beam, 12 Volt - Bulb is 4-1/2" diameter. (Part No: 373662R91) $8.73

Light Bulb, Sealed Beam, 6 Volt - 4-1/2" #4511. (Part No: 373661R91) $11.98

Magnetic worklight Universal Mounting. - Can be placed anywhere there is a metal surface. 3-1/2" x 6" weather resistant steel body (black), glass lens, flood pattern, 140 ft. beam. Halogen bulb, 12 V, 55 watt, replaceable. 12 ft. cord with cigarette lighter plug. (Part No: L100MAG) $43.12

Portable Halogen Work Lamp - 3" x 5" sealed beam unit, 12 V, 50 watt, 4 amp. With handle & magnetic base. Projects flood beam pattern 50 ft. wide x 30 ft. long. Lamp is not legal for street use. (Part No: L200MAGH) $74.75

Safety Light Amber - 12 volt Amber Safety Light, 4 and a 1/4 diameter, 3/8Dia by 5/8 mounting Stud.Does not include Flasher. (Part No: S.61357) $10.88

Sealed Beam Light - 6 Volt (Part No: R2712) $40.95

Sealed Beam Light - 12 Volt (Part No: R2713) $40.95

Switch, Light, with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Part No: AA4667R) $14.67

Work Lamp, HID, Flood Light - Universal high intensity discharge flood light, 35W Xenon H3 lamp, size 4.725" W X 4.330" H X 5.512" L, internal ballast, hardened glass lens, far longer life span than halogen 3000 to 3500 hours versus 280 to 400, higher lumen output 3200 lumens versus 700-1000 for halogen bulbs. (Part No: WL8500-E) $127.64

Work Light 12V With Switch - Work light, 12 volt, 3000 candle power, trapezoidal light pattern. On-off switch on back of light housing. Uses 4-1/2" diameter sealed beam lamp, L4411. (Part No: L408-12V) $30.05

Worklight 12 Volt - Red 12 Volt worklight with handle, on/off switch, swivels and rotates. (Part No: S.42792) $29.92

Worklight 12 Volt Black - 12 Volt worklight with handle, on/off switch, swivels and rotates. Mounting Holes measure 4 3.8 center to center. (Part No: S.67771) $31.65

Miscellaneous

Cab Foam Kit - With Headliner 7-Piece - Black For Tractors with 1300 Series Hiniker Cab (Part No: R1220) $310.77

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: R1236) $346.95

CabCAM Camera Observation System - When you need extra visibility around the farm or out in the field, a versatile camera observation system can give you the edge you need. Improve visibility at night with the twenty-eight infrared illuminator camera for excellent night vision. Reduces the need to turn around to check equipment. CabCAM Observation Kit Includes: Camera: Waterproof, CCD Color with Audio, 28 Infrared Illuminators Allow up to 32 feet of Visibility, Image Mirroring Function, Made to Withstand Off road Conditions. Monitor: 7 Color TFT LCD, Embedded Control Box for Direct Power Input for Cameras, AV2 Video Input for DVD/VCR etc., AV1 and AV3 Video Input to Hook Up to 3 Cameras. Accessories: AV Conversion Cable, Ball Swivel Mount Bracket with Adjustable Mounting Pad, Power Supply Cable, Earphones, Backshield, Cigarette-Lighter Power Adapter, Remote Control, Sunshield, AC Power Adapter, 20 foot and 65 foot Weatherproof Extension Cables. (Part No: CC7M1C) $330.08

Canopy - 60" wide x 65" long, moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through moulding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold seperately.Add additional $150.00 to shipping due to weight and size, this item is shipped by truck. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257X) $430.31

Canopy Mounting Kit, 2 Post - Mounts the canopy to your 2 post ROP frames except Hoop Type Frame. We need the measurement of the top of the ROP and the size of the ROP Tubing used. Put sizes in the comments section of the order form. (Part No: B6603) $75.80

Canopy Mounting Kit, 4 Post - Mounts the canopy to any 4 post ROP frame. (Part No: B6604) $65.44

Canopy Mounting Kit, Hoop Type - Mounts the canopy to CURVED OR SQUARE TOP Hoop Type ROP Frames up to 52" wide with leg thickness up to 4" x 2". (Part No: B6602) $110.28

Canopy, Small Tractors - 45" Wide x 60" Long Moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through moulding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold seperately. Add additional $150.00 to shipping due to weight and size, this item is shipped by truck. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257XSTD) $374.50

Deluxe Canopy, 3 Bow - Red. 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approx 31 inch. (Part No: RFC100R) $235.53

Deluxe Tractor Umbrella - Deluxe Umbrella comes with universal mounting bracket. Four spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework. Frame constructed of tubular steel. All metal parts are zinc plated for rust resistance. 54 inch square cover is made of durable polyester material. Each corner is double reinforced. AVAILABLE IN RED, YELLOW, ORANGE, WHITE or BLUE. State color desired in comments section of order form when ordering. (Part No: TU56-X) $155.22

HAND CLEANER GALLON - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Part No: PRM25218) $28.72

Oil System

Lucas Heavy Duty Oil Stabilizer (quart) - A pure petroleum multi-use oil supplement. Controls noise, heat and wear in manual transmissions and differentials. Number one in the heavy duty and high performance industries. Lucas Oil Stabilizer is a 100% petroleum product formulated to eliminate dry starts and reduce friction, heat and wear in any type of engine. It allows motor oils a higher degree of lubricity which reduces oil consumption and operating temperatures. Use Lucas Oil Stabilizer in gear oil to stop leaks, reduce operating temperatures and increase the life of the gear oil. Since it is pure petroleum. Key Features Increase oil life at least 50% longer, Reduces oil consumption, Eliminates dry starts, Raises oil pressure, and Increases power and miles per gallon. (Part No: LU10001) $13.84

Oil Pan Drain Plug - White Zinc finish, 7/8" - 18 UNF. Fits multiple models. Replaces: 688067C1, 359875R1 (Part No: C5NE6730B_) $2.85

PTO / Driveline

Driveline Assembly - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor and implement yokes. 1333mm (52-1/2 inch) overall length, end of yoke to end of yoke. 1110mm (43-3/4) compressed length center to center of cross bore. Cross and bearing kit is 27mm 1.063 (1-1/16) bearing diameter x 74.6mm 2.940 (2-15/16). 1333mm (52-1/2 inch) overall length. ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY138) $168.58

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor & implement yokes. 1-3/8 6 spline Q.D. tractor yoke. 1-3/8 round bore with 1/2 pin hole implement yoke. 1300mm - (51 inch) overall length end of yoke to end of yoke. 1110mm (43-3/4) compressed length center to center of cross bore. Cross and bearing kit, 27mm - 1.063 (1-1/16) bearing dia. x 74.6mm - 2.940 (2-15/16) overall length (43-3/4) . Verify length before ordering. (Part No: AB4111WY) $187.82

Driveline Assembly with Yokes - AB4 series. Complete drive shaft assembly with shielding and tractor & implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-1/4 round bore with pin hole implement yoke. 1350mm (53) overall compressed length end of yoke to end of yoke. Cross and bearing kit, 27mm - 1.063 (1-1/16) bearing dia. x 74.6mm - 2.940 (2-15/16). Overall length 1350mm (53) ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY125R) $185.22

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 - 6 spline Q.D. tractor yoke, 1-3/8 - 6 spline ratcheting torque limiter iwth quick disconnect on implement end. 1372mm (54 inch) overall length end of yoke to end of clutch. 1110mm (43-3/4) compressed length center to center of cross bore. Cross and bearing kit 27mm -1.063 (1-1/16) earing dia. x 74.6mm - 2.940 (2-15/16). 1372mm (54) overall length ***VERIFY LENGTH BEFORE (Part No: AB4111K33) $288.01

PTO Adapter - PTO adapters are located under the PTO category in the Accessories & Universal Parts section. NOTE

PTO Safety Clutch, 40 HP - 1-3/8" 6 spline male and female ends, 6" diameter, 40 HP capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Part No: B9164) $225.31

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Part No: JDV-02250) $25.68

Acrylic Hardener, 16oz - Lead free. For alkyd gloss tractor and implement enamel. Improves initial dry time and hardness development. Use with slow dry alkyd base tractor and implement gloss enamel. Not compatible with fast dry enamel or other paints. Mixes 1 to 2 gallons of unreduced paint. (Part No: TP12P) $42.45

Acrylic Hardener, 8oz - Lead free. For alkyd gloss tractor and implement enamel. Improves initial dry time and hardness development. Use with slow dry alkyd base tractor and implement gloss enamel. Not compatible with fast dry enamel or other paints. Mixes 2 quarts to 1 gallon of unreduced paint. (Part No: TP12HP) $21.29

Alumimum Hi-Heat Spray Paint - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. (Part No: TP402HHSP_) $53.07

Black Hi-Heat Spray Paint - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. (Part No: TP411HHSP) $58.51

Dakota Prep, 1 Gallon - Dakota Prep is a water-based and biodegradable cleaner that will remove wax buildup, grease, oxidation and grime from a variety of surfaces to renew paint to its previous luster. It is safe on many surfaces including painted surfaces, decals/vinyl lettering, plastics, fiberglass, clear coat finishes, aluminum, glass and rubber. (Part No: DP1G) $79.35

Dakota Shine, 1 Gallon - Dakota Shine is a unique and patented product that will restore the color, lustre and value to faded and oxidized surfaces like paint, decals, plastics, fiberglass, engine compartments and more. The ingredients are designed to penetrate the surface to rejuvinate the pigments to their original, lime-new appearance. No mixing required, quick dry time and no overspray lines to buff out. Used in conjunction with Dakota prep for best results. (Part No: DS1G) $109.61

Paint, Aluminum, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312GAL) $44.12

Paint, Aluminum, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312QT) $18.84

Paint, Aluminum, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312SP) $45.50

Paint, Clear Coat, 1 Gallon - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447GAL) $76.04

Paint, Clear Coat, 1 Quart - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447QT) $30.93

Paint, Clear Coat, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447SP) $55.30

Paint, Farmall Red, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP110GAL) $43.18

Paint, Farmall Red, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP110QT) $18.84

Paint, Farmall Red, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP110SP) $45.50

Paint, Gloss Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP550GAL) $43.83

Paint, Gloss Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP550SP) $45.50

Paint, Gray Primer, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700GAL) $43.83

Paint, Gray Primer, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700QT) $18.84

Paint, Gray Primer, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700SP) $45.59

Paint, IH Blue, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.q (Part No: TP910GAL) $53.47

Paint, IH Blue, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP910QT) $25.39

Paint, IH Blue, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP910SP) $42.66

Paint, IH Red, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP905GAL) $44.12

Paint, IH Red, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP905QT) $18.84

Paint, IH Red, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP905SP) $45.50

Paint, McCormick Deering Gray, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP450GAL) $73.82

Paint, McCormick Deering Gray, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP450QT) $32.53

Paint, McCormick Deering Gray, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP450SP) $54.76

Paint, Non Glare Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP120GAL) $48.01

Paint, Non Glare Black, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP120QT) $21.30

Paint, Non Glare Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP120SP) $45.50

Paint, Off White, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP900GAL) $46.37

Paint, Off White, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP900QT) $18.84

Paint, Off White, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP900SP) $45.50

Paint, Satin Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225GAL) $48.12

Paint, Satin Black, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225QT) $19.73

Paint, Satin Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225SP) $45.50

Paint, Soft Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP200GAL) $55.96

Paint, Soft Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP200SP) $45.50

Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116GAL) $68.39

Slip Resistant Coating - Quart can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 19 to 25 square feet. (Part No: BL116QT) $28.23

Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is a concentrate which you dilute one-to-one with water. A little goes a long way! (Part No: E844Q) $22.47

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R) $42.75

Seats

Seat Belt - Universal Seat Belt. Can be adapted to many tractors. (Part No: RSB22) $77.53

Seat Belt, Universal - Seat belt, universal 2-point static adjustable belt. Fits TS1110 seats. (Part No: TS1110BELT) $17.79

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt �up & angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056V) $1511.29

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt �up & angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056V) $1511.29

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt �up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056) $1437.23

Seat, Industrial - Seat assembly. Durable one-piece stamped steel pan. (Yellow) Leatherette upholstery, Dimensions: 18" W, 19" H, 21" D. (Mounting holes 9" W x 9-3/4" D). Fits several Commercial Turf/Mowers, Utility trucks, Fork Lifts, Skid Steer Loaders, Pavers, Sweepers, Construction Equipment, Utility tractors, Row crop tractors, Loader backhoes, Etc. (Part No: TS1110INDY) $102.91

Seat, Universal - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is Black. (Part No: TS1050ATSP) $95.63

Seat, Universal - BLUE Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLUE. (Part No: TS1060ATSP) $95.63

Seat, Universal - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLACK. (Part No: TS1075ATSP) $95.63

Seat, Universal - Seat assembly, Black leatherette upholstery, Dimensions: 18-3/4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward/rear adjustment (Slide track 9 inches W x 11-1/4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before purchasing. Weight 33 lbs. (Part No: TS1110BK) $110.68

Seat, Universal - Seat assembly, Blue leatherette upholstery, Dimensions: 18-3/4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward/rear adjustment (Slide track 9 inches W x 11-1/4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110BL) $113.74

Seat, Universal - Seat assembly, Yellow leatherette upholstery, Dimensions: 18-3/4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward/rear adjustment (Slide track 9 inches W x 11-1/4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110YL) $110.68

Seat, Universal INDUSTRIAL with SLIDES - Seat, universal, non-suspension style seat assembly with slide track for forward/rear adjustment. Slotted base for adjusting slide tracks side to side 4" to 10-1/4". Black leatherette upholstery, vacuum formed and watertight for use in all weather conditions. (Part No: TS1036IND) $72.78

Tie-On Seat Cover - Grey & Red 19". Deluxe cover with 2 inches of foam padding. Does not fit all tractors, must have a pan type seat only. (Part No: R2599) $31.50

Tie-On Seat Cover - Red & White, 21" wide. Deluxe with 2 inches of foam. (Part No: R1015) $31.50

Universal Seat - Black leatherette upholstery. Narrow seat for compact tractors. Internal suspension, weight adjustable. 5 position adjustable base. Special slotted base for mounting. Seat is 15" wide, 17" long, 19" high to the back of the seat. (Part No: TS1015) $182.49

Universal Seat - **YELLOW** Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Part No: TS1040ATSP) $95.63

Sheet Metal / Body Parts

2 Hour DVD - The How To of Sheetmetal Repair - This DVD is intended to show how to restore sheetmetal on your tractor. A John Deere tractor is used in the demonstrations but the information is useful for all tractors. You can use this DVD as a tool to evaluate what work, cost, and time it is going to take to restore the tractor you own or are looking to purchase. 118 minutes. (Part No: RCR06-DVD) $25.68

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Part No: R0140) $31.59

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, and 1/2. (Part No: RPD112K) $146.93

Toolbox - Universal style of 11 inches long, 4 inches wide and 4.5 inches tall. Must drill mounting holes to match your tractor. (Part No: ABC308) $40.12

Toolbox - Universal Toolbox 15 1/2" X 4 3/4" X 4 1/4". Comes Primed ready to prep and paint. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: R2685) $30.87

Toolbox, Fender Mount - This is an aftermarket toolbox designed to mount easily on the fender of most agricultural and industrial tractors. This is an aftermarket item, unlike any original toolboxes, and is meant for working tractors in need of a good toolbox. 18 inches long, 3-5/8" wide and 4-1/2" deep. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: TB100FM) $46.38

Weather Brake - By Femco, Inc. We have Custom and Universal for hundreds of models. Helps fight cold wind. Installs Easily and Quickly. Heavy Vinyl Cover, Adjustable window flaps, Heavy Gauge Steel Frame, Big 3-Section Window. Custom Fit are $449. Universal are $299. Shipping is $35. 2 Month limited warranty. 30 day return policy. CALL TO ORDER 800-853-2651. (Part No: WEATHERBRAKE) $0.00

Steering

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Part No: R3275) $7.12

Steering Wheel Spinner, Black - Comes with mounting hardware. (Part No: R3276) $12.29

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Part No: R3279) $7.20

Steering Wheel Spinner, Green - Comes with mounting hardware. (Part No: R3278) $7.20

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Part No: R6323) $3.90

Steering Wheel Spinner, Red - Comes with mounting hardware. (Part No: R3277) $7.49

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Part No: R3280) $7.20

Tools

*Combination Wrench Set - 22 pieces SAE/Metric. Polished chrome vanadium steel. Metric: 9, thru 19 mm. SAE: 1/4 thru 7/8. Comes with a durable plastic rack for handy storage. LIFE TIME UNLIMITED WARRANTY. (Part No: W1069) $32.09

Adjustable Cylinder Hone Replacement Stones, Coarse - Set of three 4" coarse textured stones with cotter pins for 900542 cylinder hone. (Part No: 900563) $18.70

Adjustable Cylinder Hone Replacement Stones, Fine - Set of three 4" fine textured stones with cotter pins for 900542 cylinder hone. (Part No: 900556) $18.70

Adjustable Cylinder Hone Replacement Stones, Medium - Set of three 4" medium textured stones with cotter pins for 900542 cylinder hone. (Part No: 900549) $18.70

Adjustable Engine Cylinder Hone - Resurfaces cylinder walls so new rings will seat and eliminate minor cylinder wall imperfections. 2" to 7" diameter range with adjustable tension settings to control the cutting action. Features flexible shaft that will fit any variable speed drill and replaceable 4" stones. Medium texture stones included. Stone replacement part numbers are (900556)Fine textured stones, (900549) medium textured stones and (900563) coarse stones. (Part No: 900542) $41.06

Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Part No: S.29891) $15.23

Chain Binder - 1/4" chain binder, 2600 pound load limit. (Part No: LL104) $36.73

Chain Binder - 3/8" chain binder, 5400 pound load limt. Use with either 5/16" or 3/8" chain. (Part No: LL105) $42.63

Chain Binder - 1/2" chain binder, 9200 pound load limit. Use with either 3/8" or 1/2" chain. (Part No: LL106) $79.85

Combination Wrench Set - 11 pieces. Sae sizes 1/4 to 7/8. Chrome vanadium steel construction. Handy storage rack. LIFETIME UNCONDITIONAL WARRANTY. (Part No: W1061) $22.47

Compression Tester - Checks cylinder compression up to 300 PSI. Fits 14 and 18mm spark plug threads. Equipped with air-hold valve and gauge reset button. 11 inch flexible rubber hose. Complete with instructions. (Part No: W80579) $34.75

Cotter Pin Assortment - 150 Pieces. Contains sizes of 1/8x2, 5/32x2 1/2, 3/16 x 3, 1/4 x 2, 1/4 x 3, 5/16 x 2 1/2. All in a convenient re-sealable plastic case. (Part No: W5206) $13.35

Cotter Pin Assortment, Small - 560 piece assortment of 1/16" x 1", 3/32" x 1", 3/32" x 1-1/2", 1/8" x 1-1/4", 1/8" x 2", 5/32" x 2-1/2" all in convenient re-sealable plastic case. (Part No: W5205) $10.06

Diesel Compression Test Kit - Complete kit with case. 0 to 1000 PSI Gauge (0-700kPA). Includes 9 adapters for popular Domestic, Asian and European vehicles. Will fit the following thread sizes: 24 x 2.00, 12 x 1.25, 10 x 1.25, 10 x 1. Tests compresssion through both flow plug and injector holes. Gauge accuracy +/- 2 percent. (Part No: W89731) $64.15

Digital Calipers, Stainless - High quality hardened stainless steel digital caliper. calculates measurements up to 6" with SAE and METRIC conversions. Includes convenient carrying case and spare battery. (Part No: CAL6) $37.35

GREASE GUN - GREASE GUN-Pistol handle grease gun uses standard 11" grease cartridge. Develops 8000 lbs pressure. Pistol design makes it convenient to use. (Part No: GG3121) $29.17

GREASE GUN - Spring fed 11" barrel grease gun. Uses standard 11" grease cartridge. Lever handle develops 10, 000 lbs of pressure. (Part No: GG1080) $20.66

GREASE GUN - HEAVY DUTY Grease gun, ultimate gun designed specifically for heavy-duty use and is built to take extreme punishment. (Part No: GG11142) $36.00

GREASE GUN CLAMP - Clamp holds all 2-1/4" diameter barrel hand guns. Bolts or screws anywhere thru hole in bracket base. (Part No: GC102) $11.21

GREASE GUN POWERLUBER 14.4V BATTERY - Battery, Replacement 14.4 Volt NI-CAD rechargeable battery for use with GGPL1442B & GGPL1444B PowerLuber grease gun. (Part No: GGPL1401) $117.65

GREASE GUN POWERLUBER 14.4V with CASE 1 BAT - Grease gun 14.4 Volt PowerLuber, Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, 14.4 volt NI-CAD rechargeable battery, 30" flex hose with spring guard & custom carrying case to hold two rechargeable batteries. (Part No: GGPL1442B) $288.95

GREASE GUN POWERLUBER 14.4V with CASE 2 BAT - Grease gun 14.4 Volt PowerLuber, Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, (2) 14.4 volt NI-CAD rechargeable batteries, 30" flex hose with spring guard & custom carrying case to hold two rechargeable batteries. (Part No: GGPL1444B) $403.25

GREASE HOSE 12 INCH - 12 flexible grease gun hose.Sold in quantities of 2, PRICE IS FOR EACH. (Part No: G115) $11.62

GREASE HOSE 18 INCH - 18" flexible grease gun hose.Sold in quantities of 2, PRICE IS FOR EACH. (Part No: G118) $10.59

Hair Pin Assortment - 150 pieces. Includes 6 different sizes from 1 3/16 Length to 2 15/16. All in a convenient re-sealable plastic case. (Part No: W5210) $8.90

Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Part No: S.58474) $267.39

Hobby Tool Kit - With Carrying Case. Complete Knife kit with two handle styles. Also comes with 3 inch caliper, tweezers, precision screwdriver and 28 blades. (Part No: W1709) $25.40

Hose Clamps Assortment - 26 pieces. Includes sizes of: 5/8, 7/8, 1, 1 1/16, 1 1/4, 1 1/2 inch. All in a convenient re-sealable plastic case. (Part No: W5348) $8.62

MULTI TESTER - Compact size meter for testing volts (up to 500 Volts), OHMS and AMPS. Includes color coded test probes and instruction booklet. Uses AA batteries, not included. (Part No: ETA66420) $18.86

Main Seal Installer/Remover - Removes and installs upper rear main seals on many engines without removing engine or crankshaft. Contains corkscrew removal tool, T-handle and wire with clip for pulling new seals into place, 2 extra clips. (Part No: W84019) $7.60

O-Ring Assortment - 407 pieces. Includes 32 sizes from 1/4 O.D to 2 1/4 O.D. All in a convenient re-sealable plastic case. (Part No: W5202) $17.51

Piston Ring Compressor - Use to install pistons. Positive compression and adjustable friction brake. Includes instructions. Band diameter from 3.5 to 7 inches (88 to 177mm). (Part No: W80573) $19.39

Piston Ring Groove Cleaner - Cleans carbon and deposits from ring grooves. Includes two 5 cutter wheels for a total of 10 groove cleaning sizes: SAE: 1/16, 5/64, 3/32, 3/16 and 1/4. Metric: 1.5, 1.75 and 2 mm. (Part No: W80576) $19.54

Rotary Tool Kit - 80 Pieces. Hand held rotary tool. Turns at 1600 rpm. Contains cut off wheel mandrel, polishing cloth wheels, mandrel for polishing cloths, carbide burr, collets, sanding drums and sleeves, buffing wheels, dressing stone and drill bits. Great for cutting, grinding, polishing, sharpening and drilling. (Part No: W50083) $20.33

Rubber Grommet Assortment - 125 pieces in 18 various sizes from 1/8 x 9/32 to 1 inch. All in a convenient re-sealable plastic case. (Part No: W5214) $10.04

Screwdriver Set - 30 pieces. Contains 7 screwdrivers 1/4 to 6 inch, a magnetic bit driver, 6 precision screwdrivers, 14 power bits. All contained in a Plastic Rack (Part No: W1718) $24.70

Spring Assortment - 200 pieces. Includes compression type sizes from 9/32 x 1/2 to 7/32 x 1 1/2, extension type from 13/64 x 13/16 to 11/32 x 1 7/16. (Part No: W5200) $8.54

Step Drill Bit Set - 3 Pieces. Titanium Nitride Coated high speed steel. 1/4 inch shank. Drills holes up to 1 inch. For use with metal, wood or plastic. Starts on contact, no center punch required. Automatically deburrs holes as you drill. (Part No: W9003) $18.40

T-Handle Hex Key Set - 10 Pieces (SAE). High quality carbon steel shafts. Black oxide finish resists corrosion. PVC T-handle grips for added torque and comfort. Sizes: 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16 and 3/8 inch. Comes with hand storage rack (mountable). (Part No: W80274) $21.34

Torque Wrench - Micrometer 1/2 inch drive adjustable torque wrench. Chrome plated alloy steel. Reversible ratchet head. SAE and Metric Scale. 10 to 150 lb torque range. 1 lb graduations. (Part No: M200DB) $36.81

Valve Spring Tool - Compresses springs without removing head. Adjustable cam handle keeps tool correctly adjusted for entire job. Remove lever and turn with socket in confined areas. (Part No: W80567) $33.43

WIRE STRIPPER 4-WAY - 4-way wire stripper/crimper tool, cuts wire 10 gauge and lighter. Strips wire 10-22 gauge, crimps solderless terminals. (Part No: ETA66223) $7.51

Winch Remote, Wireless - Used with winch sets 3013-0002 and 3013-0001. (Part No: 3013-0003) $22.48

Winch Set, 2500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0002) $110.33

Winch Set, 2500 Lb - Universal 12 volt with Hand held remote. (Part No: 3013-0004) $110.33

Winch Set, 3500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0001) $124.13

Winch Set, 3500 Lb - Universal 12 volt with Hand held remote. (Part No: 3013-0005) $124.13

Wire Terminal Assortment - 160 piece set. Contains 19 popular sizes and types of wire terminals. All in a convenient re-sealable plastic case. (Part No: W5213) $16.56

Woodruff Key Assortment - 80 pieces. Includes 10 each of: 3x5x13 mm, 3x6.5x16 mm, 4x5x13 mm, 4x6.5x16 mm, 4x7.5x19 mm, 5x7.5x19 mm, 5x9x22 mm, 6x9x22 mm. All in a convenient re-sealable plastic case. (Part No: W5341) $12.05

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Tractor Tires - We are now offering Front Tractor Tires! Click on the picture to view different tread designs. Tires that have a corresponding letter are available. Tread designs vary depending on size and availability. Allow 7 to 10 business days for delivery. Call for shipping cost, pricing and tire availability 1-800-853-2651. Please have your tire size available. Do not put this part in basket. NOTE

Rear Rim Carriage Head Bolt and Nut - 2.5 length, 5/8 diameter FF Carriage Head Bolt with nuts. PRICED EACH. **Minimum order is quantity of 6. (Part No: HB250) $3.75

TIRE GAUGE - Gauge has special oiling & pump-out feature to clean out anti-freeze. Calibrated 4-50 pounds. (Part No: T9350) $11.79

TIRE GAUGE DIAL - Precision bourdon tube (non-plunger), dial style tire gauge: 60 pound. Reading in 1 pound calibrations. Individual "see-thru" vinyl permanent container pouch. Not for use with liquid-filled tires. (Part No: T600XG) $13.07

Tire Gauge, Heavy Duty - Accugage measures up to 60 lbs. Comes with braded flexible hose, bleed valve, unbreakable crystal and rubber boot. Brass geared movement. Bourdon tube design (not plunger type). (Part No: B1SB6599) $40.14

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R) $42.75

Tire Paint, Black - Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. A little goes a long way! (Part No: E844Q) $22.47

Tire Tube - For 5.50, 6.00, or 6.50 X 16 tires. This is a bias style tube, not for radial tires. Not for recreational use. (Part No: WHS050) $15.25

Tire Tube 24 Inch - For 7.5, 8.3, 9.5 x 24 inch tires. (Part No: WHS060) $40.23

Tire Tube 24 Inch - For 11.2, 12.4 x 24 inch tires. (Part No: WHS059) $54.89

Tire Tube 28 Inch - For 11.2, 12.4 x 28 Inch Tires. (Part No: WHS058) $60.51

Tire Tube 28 Inch - For 13.6, 14.9 x 28 Inch Tires. (Part No: WHS061) $85.01

Tire Tube 32 Inch - For 9.5 x 32 Inch Tires. (Part No: WHS062) $60.94

Tire Tube 38 Inch - For 11.2, 12.4 x 38 Inch Tires. (Part No: WHS064) $69.82

Tire Valve Fluid Adapter - For ballast. (Part No: S.61167) $20.92

Tire and Tube - 400x12 3 Rib Tire with tube. (Part No: 400x12-3) $79.42

Tire, Three Rib - Front tire, 3 Rib, 5.50 x 16. Designed to be used with tube (#WHS050). 6 Ply (Part No: T5.50X16) $91.95

Tire, Three Rib - Front tire, 3 Rib, 5.50 x 16. Designed to be used with tube (#WHS050). 6 Ply. (Part No: T5.50X16) $91.95

">

Manuals

If you will be servicing or maintaining your tractor, we highly recommend that you have a manual to refer to. We searched the tractor manual database and found the following items. They may or may not apply to your tractor, please read the descriptions carefully. Our search engine isn't perfect... yet!

Farmall A Manuals

A Service Manual 65 Pages (Part No: IH_A,AV,B,BN_SV) $19.95

A I&T Aftermarket Shop Manual 88 Pages (Part No: IH-8) $26.95

A (Clutch Only) Service Manual 132 Pages (Part No: IH_CLUTCH_SV) $19.95

A Parts Manual 226 Pages (Part No: IH_A-B_PT) $24.95

A with # 18 Highway Mower Service Manual 90 Pages (Part No: IH-S-HAY MAHNS) $32.95

A Implements Parts Manual 422 Pages (Part No: IH-P-A,B,H,MIM) $102.95

A Implements Operators Manual 262 Pages (Part No: IH_A-IMPLEMENTS_OP) $24.95

A Operators Manual 117 Pages (Part No: IH_A,AV_OP) $19.95

A, Accessories Only - Includes Piston Kits, Brgs, Lites, Etc Parts Manual 185 Pages (Part No: IH_ACCESSORY_PT) $19.95

Super A Parts Manual 304 Pages (Part No: IH_SUPA_PT) $47.95

Super A I&T Aftermarket Shop Manual 88 Pages (Part No: IH-8) $26.95

Super A Operators Manual 103 Pages (Part No: IH_SUPA-AV_OP) $29.95

Miscellaneous Related Items
Tune-up DVD

Farmall Super A - Includes rebuilding the carburetor and distributor, oil and filter change, brake adjustment, troubleshooting and more. Step-by-step instructions. Information also pertains to the Farmall A, BN, C, Super C, 100 & 200 Series Tractors (Part No: JDV-00450) $24.00

Rebuild DVD

Farmall Super A - Shows how to completely rebuild the tractor's engine. You'll see the engine disassembled down to the bare block and then rebuilt step-by-step in an easy-to-follow format. With information pertaining to the Farmall A, BN, C, Super C, 100 & 200 Series Tractors (Part No: JDV-00350) $24.00

Hat

IH Logo hat - Grey women's military style cap with IH logo. (Part No: IHWM) $19.95

Mossy Oak camouflage hat - With IH logo, red sandwich brim and mesh back (Part No: IHCF) $19.95

Grey hat - With red mesh back featuring the IH logo. (This is our best selling IH hat!) (Part No: IHBM) $19.95

Red hat - With black brim and IH logo. (Part No: IHBR) $13.95

Solid red hat - With IH logo. (Part No: IHSR) $13.95

Charcoal hat with black brim - With embroidered Farmall H or M style tractor. (Part No: FMCB) $19.95

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Customer Service
Monday - Friday
9:00-6:30pm
EST

Order online
anytime!

Your Shopping
is Secure

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.