FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 7610 Parts

Category: Steering

[Categories] [All 7610 Parts] [All Ford Models]

Axle Fork and Shaft, Outer - Carraro 4WD front ends on Ford models 5610, 6610, 6810, 7610, 7710, 250C, 260C, 345C, 345D, 445A, 445C, 445D, 450, 455C, 545A, 545C, 545D, 555B, 555C, 555D, 655, 655A, 655C. This part replaces 83952526, CAR40760, N13510 (Item #: 156151, Ref: CAR40760) $250.00

Axle Knee, Left Hand - This is a Left Hand Axle Knee used on Ford 5000, 7000, 5600, 6600, 7600, 5610, 6610, 7610. It replaces original part number C5NN3007A (Item #: 169481, Ref: C5NN3007A) $288.00

Axle Knee, Right Hand - This is a Right Hand Axle Knee used on Ford 5000, 7000, 5600, 6600, 7600, 5610, 6610, 7610. It replaces original part number C5NN3006A (Item #: 192769, Ref: C5NN3006A) $345.65

Axle Pin Locking Plate - This locking plate is used with 312659 Pin. Replaces C5NN3128B. (Item #: 153968, Ref: C5NN3128B) $12.00

Axle Pin, Front - This Heavy Duty Front Axle Pin is threaded. 1.750 inch outside diameter, 4.71 inch long, 4.00 inch usable length. For the following models built after 7/1958: 601, 701, 801, 901, 2000, 2100, 2600, 2610, 2810, 2910, 3100, 3600, 3610, 3910, 4000, 4100, 4110, 4600, 4610, 5100, 5600, 5610, 6600, 6610, 7100, 7600, 7610. Uses C5NN3128B Flange. (Item #: 172932, Ref: 312659) $73.00

Axle Pivot Bushing - On Carraro 4WD front ends, this the outer most bushing on the pivot assembly. Measures 135mm outside diameter, 124mm inside diameter, 42 mm wide. This part replaces OEM part numbers CAR1234751, CAR123475, 83971641, 9968007, 83957129, 337255A1 (Item #: 156147, Ref: CAR1234751) $39.20

Axle Pivot Pin Bushing - For Ford tractor models TW10, TW20, TW30, 3500, 4400, 5000, 5100, 5110, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7100, 7600, 7610, 7700, 7710, 7740, 8000, 8240, 8340, 8600, 8700, 9000, 9600, 9700, Compatible with Ford Construction and industrial models 3550, Replaces Ford OEM number C5NN3446A, 81802940, 81941357, 1.50" O.D., 1.247" I.D., 1.375" Long, Rear Bushing, (Item #: 111730) $3.20

Axle Spacer - For tractor models 4000, 5000, 5900, 7000, 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW20, 4600, 5600, 6600, 6700, 7600, 7700, 4610, 5610, 6610, 6710, 7610, 7710, 7810, 7910, 8210. (Item #: 182791, Ref: C5NN3N030G) $7.00

Axle Support Bushing - Used on Carraro 4WD front ends, this bushing measures 4.921 inches outside diameter, 4.527 inches inside diameter and is 1.653 inches long. Replaces OEM numbers K965756, K965265, 1-33-241-048, 9967992, K965265, CAR101575/1, CAR123477, CAR1015751, 9967992, 83930079, 83930554, R113767, 3541395M1 (Item #: 156131, Ref: CAR1015751) $91.21

Ball Bearing Assembly - The is an open, deep groove bearing. It has applications in transmissions as well and is CAR MFWD front ends. It measures: 60mm (2.362 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces manufacturer part numbers: 6212, 32306, ST269A, 3114946R91, K261879, 83930318, 20141040, CAR25813, 28996590, C5NN7127B, 81804781, 80996590, 20140, 253072272, 8101-06212, 1440545X1, 24101-62124, 971043 (Item #: 156046, Ref: C5NN7127B) $26.50

Ball Joint and Rod - This part is 7.540 inches long and M20 X 1.5 right hand thread. 5110, 5610, 5900 (MEXICO), 6410 (UK ONLY), 6610, 6710 (FLAT DECK), 6810, 7410, 7610, 7710 (FLAT DECK). Replaces original part numbers 83957098, F198300100030, ZP0501310060. (Item #: 104398, Ref: ZP0501310060) $53.00

Ball Joint and Rod - This Ball Joint is 7.030 inches long and has M20 X 1.5 right hand thread in both sides. It replaces ZP0750125014. (Item #: 105181, Ref: ZP0750125014) $52.00

Ball Joint and Tube, Left Hand - This Left Hand Ball Joint and Tube is used on tractors with ZF Four Wheel Drive Axles. 5110, 5610, 5900 (MEXICO), 6410 (UK ONLY), 6610, 6710 (FLAT DECK), 6810, 7410, 7610, 7710 (FLAT DECK) Replaces original part numbers 83959474, 83984962, ZP0501205468, ZP0501206190. (Item #: 104674, Ref: ZP0501206190) $106.37

Ball Joint and Tube, Right Hand - This Right Hand Ball Joint and Tube is used on tractors with ZF Four Wheel Drive Axles. 5110, 5610, 5900 (MEXICO), 6410 (UK ONLY), 6610, 6710 (FLAT DECK), 6810, 7410, 7610, 7710 (FLAT DECK. 13.375 inches long with M22 X 1.5 RH Thread. Replaces original part numbers 83959475, 83984963, ZP0501205469, ZP0501206191. (Item #: 104673, Ref: ZP0501206191) $82.00

Bearing Assembly - On ZF Axle APL 335 this bearing sits between the axle housing and the spindle. It measures 25mm inside diameter, 52mm outside diameter, 19.25mm wide. Replaces ZP0750117169, 412287, ZP0635900468, 81294C1, 412287, 32205 (Item #: 158092, Ref: ZP0750117169) $25.80

Bearing Assembly - On APL 335 Axles, the bearing is located behind the input gear set. It replaces OEM numbers 83945716, 83985018, ZP0750117352, 87387938, 268735, 5143109, ZP0735370350, 81214C1, 455387C91 (Item #: 180113, Ref: ZP0735370350) $181.00

Bearing Assembly - On APL 335 Axles, the bearing is located behind the input gear set, closest to the back of the tractor. Measures 31.75mm inside diameter, 68.26mm outside diameter, 22.225mm wide. Replaces OEM part numbers 671031R91, K620116, 671032R1, ZP0735370840, 81232C1, 671033R1, 81231C1, 83985012, 86516897, AL71100, L60075, L60076 (Item #: 180111, Ref: ZP0735370840) $25.60

Bushing - Bushing Assembly, Upper. For tractor models 2600, 3600, 4100, 4600 (4/1976-1981); 5600, 6600, 7600 with manual steering (4/1976-1981);2610, 3610, 4110, 4610, 5610, 6610, 7610 with power steering (1981-3/1985).D5NN3517A (Item #: 114044, Ref: C5NN3517A) $6.30

Bushing - Bushing, 1.375 long. For Power Steering Center Arm Pivot Shaft, Upper Bushing. For tractor models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. (Item #: 153967, Ref: C5NN3179B) $4.60

Center Arm - Center Arm, for Power Steering Pivot Shaft. For tractor models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. (Item #: 100667, Ref: D6NN3N670A) $76.00

Cross and Bearing Kit - A= 1.18 inch, B= 1.18 inch, C= 3.62 inch, D= 3.62 inch. For tractor models 5110, 5610, 5610S, 6410, 6610, 6610S, 6810, 6810S, 7010, 7610, 7610S, 7710, 7810, 7810S, 7910, 8010, 8210 all with MFWD. Replaces E7NN4635AA. (Item #: 156127, Ref: 83959516) $61.00

Differential Pinion Bearing - Used on Mechanical Four Wheel Drive axles APL325, APL335, APL345, APL350, and APL355, this bearing is used with the pinion gears closest to the hub. Replaces E2NN1N055AA, 135700421044, 81326C1, 83927802, 83934020, 153317487, 1429562, M382179, 1-31-742-032, 04350447, F198300020650, E1NN1N055AB, JD10250, AL39377. (Item #: 112468, Ref: 81326C1) $43.50

Differential Pinion Bearing - Used on mechanical four wheel drive front ends, this open roller bearing measures 1.42 inches inside diameter, 2.28 inches outside diameter and 0.78 inches wide. Replaces OEM numbers International Harvester - 81326C1, Ford/New Holland - 83934020, E2NN1N055AA, John Deere - AL39377, JD10250 (Item #: 112468, Ref: VPJ2550) $43.50

Differential to Axle Housing Seal - On ZF Axles, this o-ring goes between the deferential case and the axle housing. Used on APL 325 and APL 335 axles. Replaces E1NN3N267AA, 81279C1, 83927734, L40306 (Item #: 156189, Ref: E1NN3N267AA) $2.20

Drag Link End - Rear - For Ford tractor models 5000 (68-75 and 65-12/67 when replacing non thread link), 5100 (with manual steering), 5600 (75-81 with manual steering), 5610 (81 with manual steering), 6410 (with manual steering), 6610 (81 with manual steering), 7000 (68-75 and 65-12/67 when replacing non thread link), 7100 (with manual steering), 7600 (75-81 with manual steering), 7610 (with manual steering), Replaces Ford OEM number C5NN3307N, C7NN3307B, Rear Drag Link End, Length 47.500", (Item #: 104619) $76.00

Drive Shaft - Used on ZF Axle APL335 this shaft is found on Ford tractors 5110, 5610, 6410, 6610, 6810, 7610 with mechanical four wheel drive. Used in production from 5/1984 - 1/1987. Replaces ZP4472352075, ZP0769126310, 83949049, 81320C1 (Item #: 124728, Ref: ZP0769126310) $42.90

Drop Arm - For Ford tractor models 5000, 5600, 5610, 5900, 6600, 6610, 7000, 7600, 7610, Replaces Ford OEM number C7NN3590B, 81822063, (Item #: 154911) $115.00

Final Drive Shaft - Used in Mechanical Four Wheel Drive front ends, this part replaces: E1NN3A328AB, L40029, 81453C1, 83927740, 83934903. It has 18 teeth on both ends. (Item #: 124721, Ref: L40029) $95.00

Front Axle - Differential Housing Bushing - The measurements on this bushing are: 4.525 inches outside diameter, 4.127 inches inside diameter, 1.730 inches long. This bushing is used on Carraro 4WD front end. Replaces OEM numbers 101565, K965266, CAR1015651, 83945601, CAR101565/1, CAR123478, 83930062, 9967993, R113766, 3541396M1, 040953R1 (Item #: 156132, Ref: CAR1015651) $79.00

Front Axle Bushing - This Front Axle Pin Bushing is used on 5000, 5100, 7000, 7100, 5600, 6600, 7600, 5610, 6610, 7610, 8000, 9000, 8600, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35, 3500, 4400. It has a 2.132 inch outside diameter, a 1.893 inch inside diameter and is 2 inches long. It replaces original part number C5NN3153A (Item #: 111728, Ref: C5NN3153A) $5.20

No
Picture
Front Axle Housing - Left Hand - For Ford tractor models 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7810, 7810S, 7910 Replaces Ford OEM number CAR1203271, 81867870, , Compatible with New Holland tractor models 7010, 8010, (Item #: 191011) $1613.56

Front Axle O-Ring - Many Carraro 4WD front axle equipped use this o-ring at the front of the pivot assembly. This part replaces OEM numbers 83957130, 83959520, CAR28556, N805193S91, 85807958, K965267, 28103 (Item #: 156146, Ref: CAR28556) $1.20

Front Axle Oil Seal - Used on some Carraro 4WD front ends, the seal replaces OEM numbers 153326217, 5122548, 5105932, CAR115715, 83944350, K262811, K395039, EQ501510 (Item #: 156134, Ref: CAR115715) $9.64

Front Axle Pin, Front - Front Axle Pin, Manual or Power Steering. For tractor models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. (Item #: 162989, Ref: C5NN3N159A) $35.80

Front Axle Pin, Rear - 1.250 inch outside diameter, 5.150 inches long, Manual or Power Steering. For tractor models 3550, 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. Replaces C5NN3N160A, 81802839, 81802839GV, E6NN3N160AA (Item #: 128484, Ref: C5NN3N160A) $25.50

Front Axle Pinion Shaft Seal - Used on APL 335 Mechanical Four Wheel Drive Axles, this seal is located at the input shaft to the differential. Replaces OEM numbers 83945747, ZP0750110088, 81233C1 (Item #: ZP0750110088) $32.27

Front Axle Sleeve - Used on the pivot pin assembly on Carraro 4WD front axles, this bushing measures 115mm inside diameter, 125mm outside diameter, and 44mm wide. Replaces OEM numbers 09968010, 83957128, 83961191, 337253A1, 9968010, CAR123476, CAR124592 (Item #: 156145, Ref: CAR124592) $111.78

Front Axle Support - For models: (5000 from 9/1970 and up), 7000, 5600, 5900, 6600, 7600, 5610, 6610, 7610. Steering Shaft Bushings (C5NN3179B and C5NN3179A) not included. Replaces Part Numbers E5NN3029BA D0NN3029A. (Item #: 153934, Ref: E5NN3029BA) $920.00

Front Axle Thrust Washer - Used in some Carraro Mechanical Four Wheel Drive front axles, this part replaces CAR115776, 47109296, CAR123478, 83944351, 9967994, K395022 (Item #: 156133, Ref: CAR115776) $31.70

Half Shaft Bushing - Used on ZF MFWD Axles this busing measures 1.462 inches inside diameter, 1.616 outside diameter, and 1.259 long. Replaces OEM numbers 81429C2, 81429C1, 83956842, L40017, L60747, ZP0730260617. Used on Ford models: 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7910, 8210, 8210 (Item #: 124593, Ref: L60747) $12.80

Half Shaft Bushing - Measuring 1.457 inches inside diameter, 1.638 inches outside diameter and 1.024 inches wide, this is the inner bushing on ZF APL325 Mechanical Four Wheel Dive axles. Replaces OEM part numbers 81410C2, 83956843, L60748, L40018, ZP0730260616. This front axle can be found on the following Ford models: 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7910, 8210 (Item #: 124592, Ref: L60748) $14.20

Half Shaft Bushing - Measuring 1.815 inches inside diameter, 1.971 inches outside diameter and 0.985 inches wide, this is the inner bushing on ZF APL335 Mechanical Four Wheel Dive axles. Replaces OEM part numbers 81287C2, 83956845, L60147, ZP0730260618. This front axle can be found on the following Ford models: 5610, 6410, 6610, 6810, 7610 (Item #: 158091, Ref: L60147) $35.60

Half Shaft Bushing - Many Carraro Mechanical Four Wheel Drive front axles use this inner half shaft bearing. This part replaces OEM numbers 09968000, 9968000, 87313791, 83952334, CAR118547, K395019 (Item #: 156140, Ref: CAR118547) $10.50

Half Shaft Bushing - This bushing is closest to the wheel on the Carraro front axle shaft. Replaces OEM numbers 09968019, 109972, 5194292, CAR109972, 83930156, 9968019, 1967535C1, 05194292 (Item #: 156143, Ref: CAR109972) $4.30

Hub Seal - Used on ZF Mechanical For Wheel Drive hubs, this seal measures 5.374 inches inside diameter, 6.516 inches outside diameter and 0.507 inches wide. Replaces AL68616, ZP0750110156, 1964236C1, 81867542, 83946555, ZP0750110156, E2NN1N049CA, ZP0734317057, ZP4472353256 (Item #: 104717, Ref: AL68616) $48.10

Hub Seal, Inner - Found in many MFWD (mechanical four wheel drive) front ends, this seal measures 4.80 inches inside diameter, 5.90 inches outside diameter, 0.53 inch width. It replaces OEM numbers 81869544, 83946025, 83932098, 83927796, E1NN1214AC, 1456320, ZP0734309421, ZP0750110140, ZP0734317062, ZO0750110147, ZP0750110147, AL68210, 84295352, 81311C1, 1964235C1, 1964235C2, 81309C1, 81310C1 (Item #: 124718, Ref: ZP0750110147) $58.00

Hub Seal, MFWD - Extensively used on Carraro mechanical four wheel drive front axles, this hub seal measures 149mm (5.86614 inches) x 176mm (5.86614 inches) x 16mm (0.629921 inches). Replaces OEM numbers 9968085, K395102, 47108806, 83996064, 82920209, 294169A1, 247877A1, 130182A1, 1349265C1, CAR126324, CAR47705, 3225110, 0003225110, 82920209, 3996064, 83996064, 83957862, 9968085, 153326219, 153326621, 1349265C1, 153326301, 09968085, 83952509, 83952530, CAR118556, CAR126324, CAR47705, CAR126390, 3501510M1, 3475598M1, 3475533M1, 3523062M1, 3541510M1 (Item #: 157753, Ref: 247877A1) $56.00

Hub Seal, Outer - Used on many MFWD (mechanical four wheel drive) front ends, this seal has an Inside Diameter of 1.814 inches, Outside Diameter of 2.568 inches, and Width of 0.671 inches. It replaces OEM numbers 1429645, 81288C1, 81288C3, 83959483, ZP0750110134, AL61448, AL39338, 31372000, V31372000 (Item #: 104716, Ref: ZP0750110134) $19.30

Joint Assembly, MFWD - Used on ZF APL325 Mechanical Four Wheel Drive front ends, this part replaces OEM part numbers 1968450C1, 81430C1, 83961165, AL63606, AL38018, AL64250, ZP7029910201. This axle was used on Ford models: 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7910, 8210 (Item #: 156193, Ref: AL63606) $596.00

King Pin - Ford / New Holland models 5110, 5610, 6410, 6610, 6810, 7610 use this king pin with equipped with MFWD (Mechanical Four Wheel Drive) ZF Axle APL 335. This front end was used in production from 5/1984 - 1/1987. Replaces OEM part numbers ZP4472352062, ZP4472352162, 81305C1, 83949007, 83946018, L61209, 380303020490, F380303020490, 81305C2, 380303000000 (Item #: 156196, Ref: ZP4472352162) $105.00

King Pin - Mechanical Four Wheel Drive, Carraro front ends use these king pins at the hubs. This king pin replaces OEM part numbers CAR115729, K395035, 83957144 (Item #: 156166, Ref: CAR115729) $71.00

King Pin Thrust Bearing - Used on several Carraro 4WD front ends, this 2 piece bearing set replaces OEM numbers N14373, 47109506, 3523057M1, 47895578, 123726, 137700410834, 153326668, 1964243C1, 14373, 83982416, 83944349, 87523063, K395040, 87521218, 47123701, 9968002, CAR123726, CAR115714, 3541402M1, 3475530M1, 3523057M1, EQ501557, ER123726 (Item #: 156136, Ref: CAR123726) $24.40

MFWD Joint Assembly - If you have a ZF Axle number APL335, this universal joint closest to the wheel, behind the hub. This was original equipment from 5/1984 - 1/1987 with APL335 Axle. Ford 5110, 5610, 6410, 6610, 6810, 7610. Replaces OEM numbers 83961173, 83946022, ZP7029910301, ZP0501205313, 1968452C1, 81307C1, 81307C2. (Item #: 156194, Ref: ZP7029910301) $591.00

MFWD Shaft Bushing - The dimensions of this bushing are 1.815 inside diameter x 1.971 outside diameter x 0.985 long. It is used in many MFWD (Mechanical Four Wheel Drive) front ends. Replaces OEM part numbers 9579217, 87791108, ZP0750101010, ZP0730260618, 83956845, 81287C2, 84996796, 81287C1, 83945712, 81287C1, 81287C2, L60147 (Item #: 158091, Ref: ZP0730260618) $35.60

MFWD Universal Joint - Used on APL axles 335, 325, 350, 345, 1351, 1551, this universal joint measures 34mm (1.339 inches) x 97mm (3.819 inches). Replaces OEM numbers ZP1927603, ZP1927831, 83934998, 81927603, 81927831, 81927603, ZP0501205340, 83956477, E3NN4635AA (Item #: 173025, Ref: E3NN4635AA) $149.00

$Ford 7610 O-Ring \ Seal$
O-Ring / Seal - Made of Nitrile Rubber, this o-ring measures 7.874 inches inside diameter with a 0.118 inch thickness. It is used in many mechanical four wheel drive systems. Replaces OEM numbers 81313C1, 81326C1, 1-31-742-032, 71452157, E1NN1N050AA, 83927797, L40317, AL40317 (Item #: 156198, Ref: E1NN1N050AA) $6.90

Outer Bushing, MFWD - Used on ZF Axles APL345, APL350, APL1351, APL1551, this bushing measures 1.813 inches inside diameter, 1.973 inches outside diameter and 1.182 inches wide. The bushing replaces OEM numbers 83956846, 87791108, L60088, 81306C1, ZP0730260619. Used on Ford / New Holland models: TW5, TW15, TW25, 5110, 5610, 6410, 6610, 6710, 6810, 7610, 7710, 7910, 8210 (Item #: 156192, Ref: L60088) $43.70

Pinion Shaft - For tractor models 6710, 7610, 7710, 7910, 8210, TW15, TW25, TW5 with mechanical four wheel drive. Replaces L40267, 83945674, ZP4472353158, 81683C1. Used on APL345 or APL350 front axles. 18 and 22 teeth. (Item #: 114884, Ref: L41123) $51.00

Pivot Pin Seal, MFWD - For ZF APL325 or APL350 Mechanical Four Wheel Drive front axles, this o-ring has a 1.346 inch inside diameter and is 0.118 inches thick. Replaces OEM numbers 81419C1, 83927817, E1NN3125AA, L53819. These axles can be found on Ford models: 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7910, 8210 (Item #: 124690, Ref: L53819) $2.30

Planetary Carrier Housing - Used on ZF APL-325 Axles on Ford 5610, 6610, 6710, 7610, 7710, 7910, 8210. This part replaces 81454C1, 135700420748, 83927791, E1NN1N045AA, L40041 (Item #: 127236, Ref: VPR6067) $1389.01

Planetary Gear - Used in APL 335 Axles, on tractors with mechanical four wheel drive, the is the gear closest to the hub. Sold individually. Replaces OEM numbers ZP4472352014, ZP0769126276, 83946053, 81325C1. Used 5/1984 - 1/1987 on Ford 5110, 5610, 6410, 6610, 6810, 7610 (Item #: 124634, Ref: ZP4472352014) $118.84

Planetary Gear - Used on Ford models 5610, 6610, 6710, 7610, 7710, 7910, 8210 with Mechanical 4 Wheel Drive. Three are used per housing. Sold individually. This part replaces 81455C1, E1NN4044AB, L40028 (Item #: 124631, Ref: VPJ7852) $107.00

Planetary Gear - Used on Ford models 6710, 7610, 7710, 7910, 8210, TW15, TW25, TW5 all with Mechanical Four Wheel Drive. This Gear has 34 teeth. Replaces 81688C1, 83985466, L39994, L41120, ZP4472353463 (Item #: 114883, Ref: L39994) $118.00

Planetary Ring Gear - Found on ZF Axle APL 335, this Planetary Ring Gear is used on Ford 5110, 5610, 6410, 6610, 6810, 7610 built between 5/1984 and 1/1987. Replaces 83954879, 83946031, ZP4472352168, ZP4472352058 (Item #: 124705, Ref: ZP4472352168) $571.00

Planetary Ring Gear - For Mechanical Four Wheel Drive, this planetary ring gear has 114 spines and an outside diameter of 8.16 inches. This part replaces OEM numbers 81452C1, 83927789, L40043 (Item #: 124630, Ref: L40043) $366.80

Power Steering Control Valve Housing - This Power Steering Control Valve Housing is used on Ford Models: 5610, 6610, 7610. It replaces original part number E0NN3C516BB. (Item #: 172996, Ref: E0NN3C516BB) $173.00

Power Steering Cylinder End - Power Steering End left hand (outer), 1.250 inches-12 right hand thread, 2.875 inches long to center of post. Tractors: 5110, 5610, 5610S, 5900, 6410, 6610, 6610S, 6810, 6810S, 7010S, 7610, 7610S, 7810, 7810S. Replaces E3NN3N981AA, 83948964. (Item #: 104640, Ref: E3NN3N981AA) $38.60

Power Steering Cylinder End - Power Steering End right hand (inner), .875 inch-14 thread female, 3.625 inches long to center of post. Tractors: 3010S, 4010S, 5100, 5110, 5600, 5610, 5610S, 5900, 6410, 6600, 6610, 6610S, 6710, 6810, 6810S, 7010, 7100, 7600, 7610, 7610S, 7810, 7810S, 8010. Verify Part number to ensure proper fit. (Item #: 100683, Ref: E3NN3B539AA) $32.00

Power Steering Cylinder Repair Kit - This Power Steering Cylinder Repair Kit is used with E3NN3A747AA shaft. It replaces 83949861, EFPN3301A, EFPN33301A (Item #: 155404, Ref: EFPN3301A) $34.30

Power Steering Cylinder Seal Kit - For Ford tractor models 3230, 3430, 3930, 4130, 4630, 4830, 5030, 5610, 6610, 6810, 7610, 7710, 7810, 7910 Replaces Ford OEM number CAR49101, 83957762, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, 6610S, 7610S, 8010, Replaces Carraro manufacturer number 49101, For 4WD only, (Item #: 114027) $48.60

Power Steering Cylinder Shaft - This Power Steering Cylinder Shaft is used on 5610, 6610, 7610, 7810, 5900, 5640, 6640, 7740, 7840, 8240, TS90, TS100, TS110. Use with EFPN3301A repair Kit. It replaces original part number E3NN3A747AA and 83948961 (Item #: 180247, Ref: E3NN3A747AA) $115.00

Power Steering Cylinder, 2 WD - For tractor models 5900, (5610, 6610, 6810, 7610, 7810 4/1985 and up), (5610S, 6610S, 7610S, 7810S 1/1994-5/1996). VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Item #: 160292, Ref: E3NN3A540BA) $270.00

Power Steering O-Ring - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3400, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5600, 5610, 5900, 6500, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 7810S, 8530, 8600, 8630, 8700, 8730, 8830, 9600, 9700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530, 530A, 531, 532, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575, 575D, 655, 655C, 655D, 675, 675D, 750, 755, 755A, 755B, Replaces Ford OEM number D2NN3D587A, D7NN3D587A, (Item #: 154787) $1.50

Power Steering Pump - Power Steering Pump and Reservoir Assembly. For 5610S, 5610, 5900, 6610S, 6610, 7610S, 7610, 7810S. (Item #: 119846, Ref: E6NN3K514AB) $260.00

Power Steering Pump - This power steering pump used with flair fitting on models using Steering Gear Box, pump has Relief Valve. For tractor models 2310, 234, 2610, 2810, 2910, 3230, 334, 335, 3430, 3910, 3930, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5030, 5100, 5600, 5610, 5900, 6600, 6610, 6710, 7100, 7600, 7610, 7710. Rated Pressure 725-1305 at 500-2000rpm. Safety valve Opening Pressure 942-1087 PSI, Safety Valve Full Open: 1087-1305 PSI. Unit designed for o-ring fitting, not supplied w/pump. This pump fits tractors with JIC fittings. Replaces 82858430, E6NN3K514PA99M (Item #: 113208, Ref: E6NN3K514PA99M) $255.00

Power Steering Pump - Dynamatic, E6NN3K514AB - For Ford tractor models 5110 (5/84-10/91), 5610 (1/81-12/93), 5610 (S (12/93-later), 6610 (1/81-12/93), 6610 (O (5/84-10/91), 6610 (S (12/93-later), 6810 (4/89-10/91), 7610 (1/81-10/91), 7610 (O) (10/81-12/91), 7610 (S (1/94-later), 7810S (12/93-7/97), Replaces Ford OEM number E6NN3K514AB, 83960261, E4NN3K514AA, E4NN3K514AB, Genuine Dynamatic pump, Manufactured to exact OEM specifications, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, For an economy version of this item use Item #: 119846, (Item #: 157621) $463.00

Power Steering Pump - Dynamatic, E6NN3K514PA99M - For Ford tractor models 2310 (3/82-12/83), 2610 (1/81-4/83), 2810 (1/84-2/90), 2910 (5/83-2/90), 3230 (3/90-9/93), 3430 (3/90-1/98), 3610 (8/81-4/83), 3610 (NO, V (8/81-4/83), 3910 (5/83-2/90), 3910 (H (1/83-2/90), 3910 (R (1/81-12/84), 3910 (H (3/90-8/99), 3930 (3/90-7/99), 3930 (NO (3/90-8/99), 3930 (N (3/90-6/95), 4110 (O (1/81-2/90), 4110 (1/81-2/90), 4130 (3/90-7/99), 4130 (NO (3/90-8/99), 4130 (N (3/90-6/95), 4610 (1/81-2/90), 4630 (3/90-7/99), 4630 (NO (3/90-8/99), 4630 (N (3/90-6/95), 4630 (O (3/90-later), 4830 (7/90-5/94), 4830 (N, O (7/90-5/94), 5030 (10/91-4/98), 5030 (O (6/94-4/98), 5610 (1/81-12/93), 6610 (1/81-12/93), 6610 (O (1/81-10/91), 6710 (1/81-9/85), 7610 ( (1/81-10/91), 7610 (O (10/81-12/91), 7710 ( (1/81-10/91), Compatible with Ford Construction and industrial models 234 (1/75-4/83), 334, 335 (1/83-2/84), 4040, Replaces Ford OEM number E6NN3K514PA99M, 83929922, 83959534, E6NN3K514PA, E0NN3K514BB, Genuine Dynamatic pump, Manufactured to exact OEM specifications, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, For an economy version of this item use Item #: 113208, (Item #: 157619) $465.00

Power Steering Pump Repair Kit - Kit repairs the following pumps: E6NN3K514EA, D8NN3K514KC, E0NN3K514AB, and E6NN3K514AB. For tractor models (2000, 3000, 4000, 5000 1965-9/1968), (8000, 8600, 9000, 9600 1/1968-2/1973), (Industrials 3400, 3500, 4400, 4500 1965-4/1970). NOTE: This kit is for pumps that used 2 - single lip seals. If your pump uses one double lip seal, use kit 83910651. (Item #: 113930, Ref: DHPN3A674B) $13.10

Power Steering Pump Repair Kit - Kit repairs the following pumps: E6NN3K514EA, D8NN3K514KC, E0NN3K514AB, and E6NN3K514AB. Note, this kit contains 1 -Double Lip Seal. If your pump uses 2 - Single Lip Seals, use part number DHPN3A674B (Item #: 187034, Ref: 83910651) $13.60

Power Steering Seal Kit - Orbital Control Valve and Gear Box Gasket and Seal Kit. For tractor models (4000, 5000 from 7/1970 and up), 4600, 5600. 5610, 6600, 6610, 7000, 7600, 7610. NOTE If you are working on a 5600, 6600, 7600, 5610, 6610 or 7610 you will also need three E0NN3A590AA Teflon seals, sold seperately. Replaces EGPN3N503AA, C9NN3R668A, E1NN3N632AA, C9NN3N598A, C9NN3R669A, C9NN3C615A, 81803034. (Item #: 164631, Ref: EDPN3500A) $14.75

Power Steering Seal Kit - This Power Steering Seal Kit is used on steering gear assemblies. It contains (1) C9NN3747A, (1) C9NN3E614A, (2) C9NN3A590A, (2) C9NN3D624B, (1) E1NN3N632AA. Replaces EGPN3N503AA, 83957121 (Item #: 168433, Ref: EGPN3N503AA) $8.80

Power Steering Valve Seal - Teflon Seals for Steering Valve. This Seal is used with EDPN3500A Power Steering Seal Kit when used on 5600, 6600, 7600, 5610, 6610, 7610. Order 3. Price is for one. (Item #: 185754, Ref: E0NN3A590AA) $7.20

Reservoir Cap, Power Steering Pump - Used on E6NN3K514EA, D8NN3K514GC, C9NN3A674D Power Steering Pumps. For tractor models 231, 233, 2600, (3500, 3550 5/1970 to 1975), 3600, (4100 4/1970 to 1975), (420, 4600, 5600, 6600, 7600 1975 to 1981), 4600SU, (5100, 7100 7/1970 to 1975) and others. (Item #: 121241, Ref: D2NN3A006B) $3.70

Roller Bearing - Used in many Four Wheel Drive Systems, this bearing measures 109.5mm (4.311 inches) inside diameter, 158.8mm (6.25 inches) outside diameter and 21.2mm (o.834 inches) wide. Replaces OEM numbers ZP0735370150, 81676C1, 84592016, 47724311, 5133737, 83952531, K395101, H1482196, CAR118370, 9967690, CAR045180, CAR142088, K395101, ZP0735370150, 83952531, 47724311, 5133737, 84592016, 6914441, 9967690, 83985020, 89967690, CAR118370, 81676C1, 05133737, 47724311, H1482196, K395101, 81676C1 (Item #: 156047, Ref: JD10249) $83.00

Roller Bearing with Cup MFWD - Used on ZF APL315, APL325, and APL330 Mechanical Four Wheel Drive Axles, the pivot bearing replaces OEM part numbers 1342525C2, 1342525C1, 81416C1, 81417C1, 83958377, AL63617, ZP0750117306, LM72848 and LM72810. These axles can be found on Ford models: 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7910, 8210 (Item #: 124691, Ref: AL63617) $47.40

Seal, Spindle Pin - For tractor models 1801, 250C, 260C, 3000, 340, 340A, 340B, 345C, 345D, 3500, 3550, 4000, 4040, 4140, 420, 4400, 445, 445A, 445C, 450, 4500, 455, 5110, 515, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 5610, 6410, 655, 655A, 6610, 6610O, 6810, 7010, 4610O, 8010, TT55, TT75. (Item #: 128511, Ref: TDBA3125A) $2.90

Self Locking Nut - Tie Rod End - For Ford tractor models 3230, 3430, 3930, 4130, 4630, 4830, 5030, 5110, 5610, 6410, 6610, 6810, 7610, 7710, 7810, 7910 Replaces Ford OEM number CAR22437, 85805982, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, 6610S, 7010, 7610S, 8010, Replaces New Holland OEM number CAR22437, 85805982, Replaces Carraro manufacturer number 22437, M18 x 1.5, (Item #: 159936) $3.87

Shaft - Pivot Shaft for Center Power Steering Arm, 4.28 inches long. For tractor models: 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. (Item #: 152060, Ref: C5NN3N703C) $28.00

Spindle Bushing, Bearing and Seal Kit - This Spindle Bushing, Bearing and Seal Kit contains: 2 - C5NN3109A (1 5/8 inch X 2 inch X 1 7/8 inch) Bushings, 2 - C5NN3110A (1 3/4 inch X 2 inch X 1 7/8 inch) Bushings, 2 C0NN3A299A (2 inch ID X 2 7/8 inch OD) Thrust Bearings, 2 - C0NN3A208A (1 1/2 inch X 2 inch X 1/4 inch) Dust Seals. Used on Ford New Holland 5000, 5100, 5110, 5200, 5600, 6410, 6600, 6610, 6810, 7000, 7100, 7200, 7600, 7610 (Item #: 104568, Ref: SBBSKIT05) $31.30

Spindle Bushing, Lower - This Lower Spindle Bushing is measures 2.004 inch outside diameter, 1.760 inch inside diameter, wall thickness .119 inch, 1.860 inch long. It is used on Ford / New Holland 3010S, 4010S, 5000, 5100, 5110, 5340, 5600, 5610, 5610S, 5900, 6410, 6600, 6610, 6610S, 6810, 6810S, 7000, 7100, 7600, 7610, 7610S, 7700, 7810, 7810S, 8000, 8400, 8600, 9000, 9200, 9600. Replaces 81802797, C5NN3110A (Item #: 100641, Ref: C5NN3110A) $4.70

Spindle Bushing, Upper - This Upper Spindle Bushing measures 2 inch outside diameter, 1.645 inch inside diameter, 1.856 inch long, and wall thickness .176 inches. It is used on Ford / New Holland 3010S, 4010S, 5000, 5100, 5110, 5340, 5600, 5610, 5610S, 5900, 6410, 6600, 6610, 6610S, 6810, 6810S, 7000, 7100, 7600, 7610, 7610S, 7700, 7810, 7810S, 8000, 8400, 8600, 9000, 9200, 9600. Replaces 81802792, C5NN3109A (Item #: 100640, Ref: C5NN3109A) $5.10

Spindle Kit, Complete - Spindle repair kit less spindle with unfinished bushings Contains (2) TDBA3110A bushings (Unfinished), (2) 87414 grease fittings, (1) D8NN3115BA 1.13 inch diameter pin, (1) C7NN3123A thrust bearing, (2) TDBA3125A seals, (1) 81T3122 spindle pin locking pin, (1) 81547 lock washer and (1) 50456 nut. Replaces DEPN3115A. (Item #: 125389, Ref: S.75082) $109.00

Spindle Nut - Fits on Front Spindles. Castle Nut 3/4 inch x 16 UNF. Replaces P2060, VLG3307, 351129S, 353928X1, 354573S36, 387930S36, 646060M1, 83416613, 83900513, 83910701, 880284M1, 9073, 98A750N. (Item #: 156038, Ref: 387930S36) $1.10

Spindle Seal MFWD - On Mechanical Front Wheel Drive tractors, the seal (o-ring) goes between the axle housing and the spindle. It is used on many ZF Axles. Replaces OEM part numbers 81296C1, 83946009, 8603728, 3147244R1, ZP0634303409, 1390411028, 81296C1, 1964258C1, 3147244R1 (Item #: 124682, Ref: 83946009) $0.70

Spindle Thrust Bearing - This Spindle Thrust Bearing measures: 2 3/64 inch (51mm) inside diameter, 2 15/16 inch (75mm) outside diameter, 5/8 inch (16mm) wide. Replaces 81802870, C0NN3A299A, 138712, 00138712, VPJ2403 (Item #: 100629, Ref: C0NN3A299A) $7.50

Spindle, Heat Treated - Left Hand - For Ford tractor models 5100, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7100, 7600, 7610, Replaces Ford OEM number D6NN3106A, Dimension A: 16.000", Dimension B: 1.498", Dimension C: 1.638", Dimension D: 1.784", Dimension E: 1.625", Dimension F: .842", Left Side, Front wheel bearing kit use Item #: 100663, (Item #: 104547) $281.00

Spindle, Heat Treated - Right Hand - For Ford tractor models 5100, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7600, 7610, Replaces Ford OEM number D6NN3105A, Dimension A: 16.000", Dimension B: 1.498", Dimension C: 1.638", Dimension D: 1.748", Dimension E: 1.625", Dimension F: .842", Right Side, (Item #: 104549) $257.00

Spindle, LH - This spindle is used on tractor models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. Uses Bushing Kit SBK6581. Uses front wheel hub part number C9NN1104D. Also uses wheel bearing kit part number WBKFD6. (Item #: 100643, Ref: C5NN3106J) $91.60

Spindle, RH - This spindle is for tractor models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. Uses Bushing Kit SBK6581. Uses front wheel hub part number C9NN1104D. Also uses wheel bearing kit part number WBKFD6. (Item #: 100642, Ref: C5NN3105M) $88.00

Steering Arm - Left Hand - For Ford tractor models 5000, 5100, 5340, 5600, 5610, 5900, 6600, 6610, 7000, 7100, 7600, 7610, Replaces Ford OEM number C5NN3131A, All Models With Power Steering, Left Side, Tie Rod attaches from bottom of steering arm, (Item #: 100665) $65.00

Steering Arm - Left Hand, Used - For Ford tractor models 5000, 5100, 5340, 5600, 5610, 5900, 6600, 6610, 7000, 7100, 7600, 7610, Replaces Ford OEM number C5NN3131A, All Models With Power Steering, Left Side, Tie Rod attaches from bottom of steering arm, For a new version of this item use Item #: 100665, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410665) $33.01

Steering Arm - Right Hand - For Ford tractor models 5000, 5100, 5340, 5600, 5610, 5900, 6600, 6610, 7000, 7100, 7600, 7610, Replaces Ford OEM number C5NN3130A, With Power Steering, Right Side, Tie Rod attaches from bottom of steering arm, (Item #: 100666) $71.00

Steering Arm - Right Hand - For Ford tractor models 5100, 5110, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7100, 7600, 7610, Replaces Ford OEM number E3NN3130AA, RH Steering Arm, Tie rod attaches to top of steering arm, (Item #: 104738) $141.00

Steering Arm - Right Hand, Used - For Ford tractor models 5000, 5100, 5340, 5600, 5610, 5900, 6600, 6610, 7000, 7100, 7600, 7610, Replaces Ford OEM number C5NN3130A, With Power Steering, Tie Rod attaches from bottom of steering arm, Right Hand, For a new version of this item use Item #: 100666, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410666) $44.01

Steering Arm - Right Hand, Used - For Ford tractor models 5100, 5110, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7100, 7600, 7610, Replaces Ford OEM number E3NN3130AA, Tie rod attaches to top of steering arm, Right Hand Steering Arm, For a new version of this item use Item #: 104738, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 446688) $78.01

Steering Arm Dust Seal - This Steering Arm Dust Seal fits between the Steering Arm and the Spindle. It measures 1 7/8 Inches (48mm) Outside Diameter, 1 1/2 Inches (38mm) Inside Diameter, 1/4 Inches (6mm) Thick. Replaces 81802845, C0NN3A208A (Item #: 104573, Ref: C0NN3A208A) $4.00

Steering Column Grommet - For tractor models 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6000, 6600, 7000, 7600, 2310, 2610, 2810, 2910, 3010, 3110, 3310, 3610, 3910, 4010, 4110, 4410, 4610, 5010, 5110, 5610, 5910, 6410, 6610, 6710, 6810, 7010, 7310, 7410, 7610. 2-7/8 inch outside diameter X 1-1/4 inch inside diameter. (Item #: 126705, Ref: D2NN3A566B) $4.00

Steering Control Valve Upper Seal Kit - This Steering Control Valve Upper Seal Kit is used on Ross, TRW, and Hydraguide Steering Valves (Steering Motors). Replaces 123465C1, 132554, 224712C1, 517416, 837253M91, 86585473, A47038, F1NN3N991A (Item #: 140493, Ref: HG500007) $37.00

Steering Gear Assembly - This stearing gear assembly for Power Steering on models 5610, 6610, 6610O, 7610, 7610O all without cab, without column shift. Complete Power Steering Assembly. Pressure port is 1/2 inch x 16 pitch, Return port is 3/4 inch x 16 pitch. This may be different than some originals, and new lines may be needed (not available through YT). Replaces 83934944, 83954900, 87486289, D5NN3N503C, D5NN3N503F, D5NN3N503H, D8NN3N503JA, E1NN3N503BA, E1NN3N503BB, E1NN3N503BC. (Item #: 149824, Ref: E1NN3N503BC) $1499.01

Steering Hand Pump, Remanufactured, 86602557, E4NN3A244AA - For Ford tractor models 5110, 5610, 5900, 6410, 6610, 6810, 7610, Replaces Ford OEM number 86602557, E4NN3A244AA, Includes pressure relief valve, (Item #: 206352) $1200.01

Steering Joint - This Steering Joint is 7.040 over all length. The Inner Thread is M20 X 1.5 RH Thread. The Outer Thread is M18 X 1.5 LH Thread. Replaces 1966127C1, 83957148, CAR49006, 1-33-743-602, 112508A1 (Item #: 104634, Ref: CAR49006) $57.00

Steering Motor - For tractor models 5610, 6610, 6810, 7610, 5610S, 6610S, 7610S, 7810S, 5900. Replaces OEM 86602590. (Item #: 113202, Ref: E4NN3A244AA) $575.00

Steering Motor Seal Kit - This Steering Motor Seal Kit has a 1.776 inch seal. It is used on Ford / New Holland models 5110, 5610, 5900, 6410, 6610, 7610, 7710, 7810, 8210, 8530, 8630, 8730, 8830, TW5, TW15, TW25, TW35, 445C, 445D, 550, 555, 555A, 555B, 555C, 555D, 575D, 655C, 655D, 675D. Replaces 83945793, F1NN3N991AA, E3NN3R513BA, E3NN3N991BA, 81871236, 86585241 (Item #: 178956, Ref: F1NN3N991AA) $178.00

Steering Sector Shaft Seal - Two of these felt seals are used per tractor. It measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476 (Item #: 124494, Ref: 8N3586) $2.20

Steering Shaft Bushing - Bushing assembly, upper consists of a rubber splined piece with a metal bushing. Fits many Ford Tractors 1965 and up, with manual and power steering. Replaces C5NN3517A, 81811803, 83903807, D5NN3517A (Item #: 114044, Ref: C5NN3517A) $6.30

Steering Shaft Seal - This Steering Shaft Seal is for 2-wheel drive models steering box with 2 arms. Goes in the base of the steering shaft. It measures 1.386 inch outside diameter, 0.866 inch inside diameter and 0.374 inch in width. Tractors: 2100, 2110, 2120, 2150, 3055, 3100, 3120, 3150, 3400, 4110, 4140, 4410 (1965-1975), 2600, 3600, 3900, 4100, 4600SU, 335, 532 (with or w/o cab, 1975-3/1976; w/o cab 4/1976-1981), 2310, 2610, 2910, 3610, 3910, 3910SU, 4110SU, 4610SU, 230A, 234, 334, 530A (w/o cab 1981-9/1984). Replaces D5NN3N632A, E1NN3N632AA and 83929295. (Item #: 164336, Ref: E1NN3N632AA) $9.60

Steering Wheel - This Steering wheel is 15 inch diameter with a 36 spline center hub. PVC grained cover material with covered spokes. For tractor models 2310, 2600, 2610, 2810, 2910, 3230, 3430, 3600, 3610, 3900, 3910, 3930, 4110, 4130, 4600, 4610, 4630, 4830, 5110, 5610, 5900, 6410, 6600, 6610, 6810, 7010, 7610, 8010, Industrials: 230A, 231, 233, 234, 333, 334, 335, 340, 530A, 531, 540, 545A, 555B. Replaces OEM number D2NN3600A, D7NN3600A. (Item #: 101427, Ref: D7NN3600A) $41.10

No
Picture
Steering Wheel Cap - Black Cap only fits 17 5/8 diameter steering wheels on models: (2000, 3000, 4000, 5000, 7000 1965-1975), (2600, 3600, 3900, 4100, 4600, 5600, 6600, 7600, 231, 233, 333, 335, 531, 532, 535 1975-1981), (2310, 2610, 2910, 3610, 3910, 4110, 230A, 234, 334, 335, 530A 1981-2/90), (5610, 5900, 7610 1981-1991), (8000, 9000, 8700, 9700, TW10, TW20, TW30 1973-1982), (3230, 3430, 3930, 4130, 4630 3/1990 and up), (4830, 5030 7/1990 and up), (5610S, 6610S, 7610S 1994 and up). (Item #: 152187, Ref: C7NN3655B) $6.00

Steering center arm pivot shaft bushing - Bushing, 1 inch long, for power steering center arm pivot shaft. Tractors 5000, 7000, 2 used from 1965 to 1/1966. Upper bushing for center arm pivot shaft, 1 used on tractors 5000, 7000 (2/1966-1975); 5600, 6600, 7600 (1975-1981); 5610, 6610, 7610 (1981-3/1985). (Item #: 153962, Ref: C5NN3179A) $4.70

Taper Roller Bearing - Measuring; Width - 0.548 inches, Inside Diameter - 3.740 inches, Outside Diameter - 5.315 inches, this bearing is used in ZF Axles on tractors with mechanical four wheel drive. This bearing also has other applications. Replaces OEM numbers: ZP0750117062, 5136951, 83946047, 81312C1, 83927807, 47539809, 1-31-741-019, 05136951, 85136951, 85806002, 1966169C1, CAR118378, 83983456, AL38099, RE45944, 819310, 819349/819310, 819349 (Item #: 156177, Ref: ZP0750117062) $82.70

Thrust Washer - Used on the pivot pin assembly on some Carraro 4WD axles, this thrust washer replaces OEM numbers 1-33-741-646, 83957128, 09968006, 83961192, 9968006, CAR124591, CAR123476 (Item #: 156144, Ref: CAR123476) $29.80

Tie Rod - Tie Rod is 1.187 diameter rod, left hand, straight, drilled, 8 holes, 31 inches to center of post. For 4600, 532, 5610, 5700, 6610, 6700, 6710, 7410, 7610, 7700, 7710, 7810, 7910, 8210, 8530, 8630, 8700, 8730, 8830, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5, 3600. Replaces 83906922, 83929292, E1NN3280AA (Item #: 100688, Ref: E1NN3280AA) $48.80

Tie Rod - This Tie Rod has 200mm (8.625 Inches) usable length shaft, 18mm X 1.5 RH thread. This is the newer style tie rod and does not use a clamp. This style requires jam nut # 87313796 currently not offered by YT. It replaces CAR48983, CAR49005, 83957757, 81878545, 81878555 (Item #: 159857, Ref: CAR49005) $65.00

Tie Rod - Right Hand - For Ford tractor models 5600 (Hi-Clearance), 5610 (L/ FWD), 5900 (L/ FWD), 6600 (Hi-Clearance), 7600 (Hi-Clearance), 7610 (L/ FWD), Replaces Ford OEM number D8NN3280GA, Length: 12.562", Diameter: 0.937", Fits Right Hand Side, (Item #: 161155) $39.70

Tie Rod Assembly - Left Hand - For Ford tractor models 5110, 5610, 5900 (Mexico only), 6410 (UK only), 6610 (01/82 - 01/87), 6710, 6810, 7410, 7610 (with APL335 Axle), 7710 (with APL325 Axle), Replaces Ford OEM number ZP0501205206, 83956514, Fits Left Hand Side, (Item #: 104631) $337.00

Tie Rod Assembly - Left Hand - For Ford tractor models TW5, TW15, TW25, 6710, 7610, 7710, 7910, 8210 (All 03/1984 - later), Replaces Ford OEM number 83945661, ZP0501205350, Fits Left Hand Side, (Item #: 104657) $253.00

Tie Rod Assembly - Right Hand - For Ford tractor models 5110, 5610, 5900 (Mexico only), 6410 (UK only), 6610 (All 01/82 - 01/87), 6710, 6810, 7410, 7610 (All 01/82 - 04/84), 7710 (All Flat Deck), Replaces Ford OEM number ZP0501205207, 83956515, (Item #: 104630) $320.00

Tie Rod Assembly - Right Hand - For Ford tractor models TW5, TW15, TW25, 6710, 7610, 7710, 7910, 8210, Replaces Ford OEM number ZP0501205349, 83945660, Fits Right Hand Side, (Item #: 104658) $360.00

Tie Rod Clamp - For Ford tractor models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610 (All 01/65 - later), Replaces Ford OEM number C5NN3287C, 81816724, (Item #: 104623) $7.60

Tie Rod End - Tie Rod End, right hand outer, 1.27 inch diameter, 17.750 inch to center of post. 1.250 inch diameter shaft. For 5610S, 5610, 6610S, 6610, 7010S, 7610S, 7610, 7810S, 7810. Replaces E3NN3278AB, 83957771. (Item #: 104637, Ref: E3NN3278AB) $40.40

Tie Rod End - Tie Rod End, left hand outer, 5 inches to center of post. For 5610S, 5610, 6610S, 6610, 7010S, 7610S, 7610, 7810. Replaces E3NN3289AA, 82980040 and 83947648. (Item #: 104639, Ref: E3NN3289AA) $41.20

Tie Rod End - For Ford tractor models 4400, 4410, 5000, 5100, 5200, 5600, 5610, 6000, 6600, 6610, 7000, 7100, 7200, 7600, 7610, 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700, Replaces Ford OEM number E3NN3307AA, C5NN3307F, 3.812" Long, 1" Diameter, 16 Right Hand Thread, (Item #: 100687) $20.50

Tie Rod End - Right Hand - For Ford tractor models 5610, 6610, 6710, 7610, 7710, 7910, 8200, Replaces Ford OEM number ZP0501205072, 83956527, Dimension A: 2.750", Dimension B: M18 x 1.5 Right Hand Thread, (Item #: 104641) $159.00

Tie Rod Inner - End, right hand inner, 1.00 inch-16 thread. For tie rod with power steering, 3.75 inch to center of post. For 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610, 8000, 8200, 8600, 9000, 9200, 9600. (Item #: 100682, Ref: C7NN3289D) $14.20

Tie Rod Inner - End, left hand inner, for tie rod with power steering, 18.125 inches to center of post. For tractor models: 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. Replaces 81822048, D6NN3B161A. (Item #: 100681, Ref: C7NN3B161A) $24.10

Tie Rod Outer - End, right hand outer, 15.375 inch to center of post, .937 inch diameter. For Tie Rod with Power Steering. For 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. Replaces C5NN3280E, 1802851, 81802851, 81822049, 1822049, 81859488, C5NN3208B, C5NN3280C. (Item #: 100680, Ref: C7NN3280E) $22.50

Tie Rod Outer - End, left hand outer, 15.375 inches to center of post. Rod diameter is 0.937 inches. For Tie Rod with Power Steering. For 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. Replaces C5NN3281B, C5NN3281B, 81822050, 1822050. (Item #: 100679, Ref: C7NN3281A) $26.20

Tie Rod Tube - This is a Right Hand Tie Rod Tube used on 5000, 7000, 5600, 6600, 7600, 5610, 6610, 7610 (1981-3/1985). 16 inches. Replaces 86547157, C7NN3B624B. (Item #: 153561, Ref: C7NN3B624B) $36.00

Tie Rod, Left Hand - This is a Left Hand Tie Rod for ZF Mechanical Four Wheel Drive axles. It is 12.625 inches long. It has M18 X 1.5 RH Thread Used on 6710, 7610, 7710, 7910, 8210, TW5, TW15, TW25 (Item #: 104675, Ref: ZP0501205463) $42.00

Tie Rod, Right Hand - This is a Right Hand Tie Rod for ZF Mechanical Four Wheel Drive Axles. It is 12.625 inches long. It has M18 X 1.5 right hand thread. Used on 6710, 7610, 7710, 7910, 8210, TW5, TW15, TW25 Replaces 83959471, ZP0501205464. (Item #: 104677, Ref: ZP0501205464) $106.37

Universal Joint - Measuring 27mm 1 1/16 inches) x 70mm (2 3/4 inches) this universal joint is used on the axle of APL 335, 325, 345, 350, and 300. Replaces OEM numbers ZP7029457207, 83964587, 84355357, ZP7029457210, 1342711C1, 81873051, 144465A1, 1342715C1, 83956476, ZP0501205345, 9968059, 247543A1, AL64126 (Item #: 124613, Ref: 1342711C1) $102.00

Universal Joint - The measurements on this Universal Joint are 27mm cup diameter and 82mm across. Side greaser included. This Universal Joint is used on Carraro 4WD front axles. Replaces OEM numbers CAR96867, CAR116859, 3230277R1, 3216550R91, 137700420834, 1967554C1, 84512487, NH80715, 9961774, 9962244, 87760752, K965331, CAR041121, CAR116859, 83934724, 81927841, ZP1927504, ZP1927841, 3230277R1, 84512487, 83957857, AL32885, 137700000000, 3475808M91, 3475808M1, 3427352M91, 1895699M1 (Item #: 156129, Ref: CAR96867) $37.10

Universal Joint - Many mechanical four wheel drive front axles use this universal joint. This part has 27mm cup diameter and is 70.9mm across (1.063 X 2.791 inches). Replaces OEM numbers 247543A1, 81882C1, 1-33-742-629, 137700420872, 144461A1, 137700420874, 195215A1, 337260A1, D149733, B507526, CAR40869, N14156, N14411, 9968059, 84355357, 85807283, 84990205, 9970163, 85805996, 87306931, CAR40889, 81874740, 85805996, 9968059, 09968059, 1-33-742-629, CAR40825, 84355357, AL71316, RE212902, ABP3002508, 508360, ABP3004431 (Item #: 158432, Ref: CAR40825) $57.00

Wheel Half Shaft Seal, MFWD - Used on ZF APL325 Mechanical Four Wheel Drive front ends, this seal measures 1.388 inches inside diameter, 2.055 inches outside diameter and is 0.588 inches wide. Replaces OEM numbers 81411C2, 83956841, 83961163, AL63351, AL68702, ZP07050110133. Ford / New Holland models: 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7910, 8210 (Item #: 124717, Ref: AL63351) $21.80

Wheel Hub Trunnion Pin - Also known as a King Pin, this Wheel Hub Trunnion Pin is used on ZF APL325 Mechanical Four Wheel Drive front ends. This part replaces L40036, ZP4472351239, 81428C1, 83946561, E1NN3B626AA. Verify your axle before ordering. Some of the models listed used more than one 4 wheel drive front end. Used on Ford / New Holland 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7910, 8210 (Item #: 124687, Ref: E1NN3B626AA) $77.00

Wheel Hub Trunnion Pin - Also known as a King Pin, this Wheel Hub Trunnion Pin is used on ZF APL345, APL350, APL1351, APL1551 Mechanical Four Wheel Drive front ends. This part replaces E2NN3B626CA, 87759380, 87772879, L40004, 81670C1, ZP4472353195, ZP4472353682. Some of the models listed used more than one 4 wheel drive front end. Used on Ford / New Holland TW5, TW15, TW25, 6710, 7610, 7710, 7910, 8210 (Item #: 156197, Ref: L40004) $93.00

Universal Parts and Accessories
Category: Steering

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Item #: 185079, Ref: WSV125A) $128.00

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.20

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.70

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $15.10

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $9.10

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $7.70

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $8.70

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 7610 Parts] [All Ford Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy