FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 7200 Parts

Category: Steering

[Categories] [All 7200 Parts] [All Ford Models]

Axle Pivot Pin, Front - For Ford tractor models 3600 (1/75-12/81), 4100 (1/75-12/81), 4600 (1/75-12/81), 5200 ('67-later), 6600 ('75-9/76), 7000 ('67-later), 7200 ('67-later), 7600 ('75-9/76), Replaces New Holland OEM number C5NN3N159C, Front Axle Pivot Pin, (Item #: 170380) $92.00

No
Picture
O-Ring and Plug Assembly - For Ford tractor models TW10, TW20, TW30, 5000, 5200, 5700, 6700, 7000, 7200, 7700, 8000, 8400, 8600, 8700, 9000, 9600, 9700, Replaces Ford OEM number D1NN3R684A, 036147A1, (Item #: 126955) $6.20

No
Picture
Power Steering Hydraulic Pump - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3150, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4330, 4340, 4400, 4410, 4600, 4600SU, 4610, 4610SU, 5000, 5100, 5200, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532, Replaces Ford OEM number D7NN3A674B, E6NN3K514DA, 83959532, Front inlet hole size: 9/16" UNF, Front outlet hole size: 5/8" UNF, Inner maximum liters per minute: 12.5, Inner maximum gallon per minute: 2.75, Top hole spacing: 107, (Item #: 170931) $497.60

Power Steering Pump - For tractor models 2000, 2100, 2110, 3000, 3100, 4000, 4100, 4110, 4500, 5000, 5100, 5200, 535, 7000, 7100, 7200. Output capacity is 1250 PSI, 4.2 gallons at 1000 RPM. Also replaces 81816585. (Item #: 114294, Ref: C7NN3A674F) $407.15

Power Steering Pump - This Power Steering Pump replaces pumps with an internal Relief Valve (will not replace external relief valve. For 3500, 3550 5/1970 and up, 5100, 7100 7/1970 and up, 4100 4/1970 and up, 4600, 5600, 6600, 7600 5/1981 and up, 5610, 6610, 7610 4/1985 and up. Power Steering Pump with reservoir. Pressure relief valves set at 1100 PSI, 2.74 GPM. This pump can replace: 83949432, E6NN3K514DA. 2000, 3000 10/1968 and up, 2600, 3600, 4100, 2610, 3610, 4110 less cab, 83959550 - E6NN3K514CA. 4000 (10/1968-3/1970), 2600, 3600, 4110 with cab. Fits others replacing the following OEM numbers: D8NN3K514GA, D8NN3K514GB, D8NN3K514GC, E6NN3K514EA, 83917191, 83923736, 83924995, 83959533, 87759440, A709527 (Item #: 113209, Ref: E6NN3K514EA) $170.00

Power Steering Pump - Dynamatic - For Ford tractor models 3000 (1/65-12/74), 3400 (1/65-9/75), 4000 (1/65-12/74), 4400 (1/65-12/74), 4410 (1/69-12/74), 5200 (1/67-12/74), 7200 (10/71-12/74), Compatible with Ford Construction and industrial models 3500 (1/65-12/74), 4500 (1/65-12/74), Replaces Ford OEM number C7NN3A674E, 81816584, C5NN3A674C, 4.2 GPM, 1100 PSI at 1000 RPM, Used in systems with separate reservoir, Genuine Dynamatic pump, Manufactured to exact OEM specifications, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 157810) $585.00

Power Steering Pump - Dynamatic, C7NN3A674F - For Ford tractor models 2000 (1/65-12/74), 2100 (3/65-12/74), 2110 (1/65-12/74), 3000 (1/65-12/74), 3100 (1/65-12/74), 3400 (1/65-9/75), 4000 (1/65-12/74), 4100 (1/65-12/74), 4110 (1/65-12/74), 4400 (1/65-12/74), 4410 (1/65-12/74), 5000 (1/65-1/75), 5100 (1/65-12/74), 5200 (1/67-12/74), 7000 (10/71-12/74), 7100 (1/65-12/74), 7100 (10/71-12/74), 7200 (10/71-12/74), Compatible with Ford Construction and industrial models 535, 3500, 4500, Replaces Ford OEM number C7NN3A674F, 81816585, Genuine Dynamatic pump, Manufactured to exact OEM specifications, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, For an economy version of this item use Item #: 114294, (Item #: 157640) $390.00

Power Steering Pump - Dynamatic, C7NN3A674G - For Ford tractor models 4000 (1/65-12/74), 4200 (1/65-12/74), 5000 (1/65-1/75), 5200 (1/67-12/74), 7000 (10/71-12/74), 7200 (10/71-12/74), Replaces Ford OEM number C7NN3A674G, C5NN3A674G, 81851286, 3.5 GPM, 1100 PSI at 1000 RPM, Used in systems with separate reservoir, Genuine Dynamatic pump, Manufactured to exact OEM specifications, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 157697) $600.00

Power Steering Pump - Dynamatic, E6NN3K514CA - For Ford tractor models 2000 (1/65-12/74), 2100 (3/65-12/74), 2110 (1/65-12/74), 2600 (1/75-12/81), 2600 (R (1/75-12/81), 2600 (N (1/75-12/81), 2600 (V (10/75-9/76), 3000 (1/65-12/74), 3100 (1/65-12/74), 3600 (R (1/75-12/77), 3600 (1/75-12/81), 3600 (N (1/75-12/81), 3600 (NO, V (1/75-12/81), 3900 (1/75-12/81), 4000 (1/65-12/74), 4100 (1/65-12/74), 4100 (1/75-12/81), 4110 (1/65-12/74), 4600 (1/75-12/81), 4600 (O (1/75-12/81), 4600 (NO (10/75-12/81), 4600SU (1/75-7/78), 5000 (1/65-1/75), 5100 (1/65-12/74), 5200 (1/67-12/74), 5600 (1/75-12/81), 5700 (7/78-9/80), 6600 (1/75-12/81), 6600 (O (1/75-12/81), 6600 (C (1/75-9/76), 6700 (1/75-12/80), 7000 (10/71-12/74), 7100 (10/71-12/74), 7200 (10/71-12/74), 7600 (1/75-12/81), 7600 (C (1/75-9/76), 7700 (1/75-12/80), Compatible with Ford Construction and industrial models 231 (1/75-12/81), 233 (1/75-12/81), 333 (1/75-12/81), 335 (10/75-9/78), 420 (10/75-9/78), 515 (10/75-9/78), 531 (1/75-12/81), 532 (10/75-9/78), Replaces Ford OEM number E6NN3K514CA, 83959550, 2.74 GPM, 850 PSI at 1000 RPM, Genuine Dynamatic pump, Manufactured to exact OEM specifications, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 157811) $360.00

Power Steering Pump - Dynamatic, E6NN3K514EA99M, E6NN3K514EA - For Ford tractor models 2000 (1/65-12/74), 2100 (3/65-12/74), 2110 (1/65-12/74), 2600 (1/75-12/81), 2600 (N, R (1/75-12/81), 2600 (V (10/75-9/76), 3000 (1/65-12/74), 3100 (1/65-12/74), 3400 (1/65-9/75), 3600 (1/75-12/81), 3600 (N, R (1/75-12/81), 3600 (NO, V (1/75-12/81), 3600 (R (1/75-12/77), 3900 (1/75-12/81), 4000 (1/65-12/74), 4100 (1/65-12/74), 4100 (1/75-12/81), 4110 (1/65-12/74), 4410 (1/69-12/74), 4600 (1/75-12/81), 4600 (O (1/75-12/81), 4600SU (1/75-12/81), 5000 (1/65-1/75), 5100 (1/65-12/74), 5200 (1/67-12/74), 5340 (6/68-12/74), 5600 (1/75-12/81), 5700 (7/78-9/80), 6600 (1/75-12/81), 6600 (O (1/75-12/81), 6600 (C (1/75-9/76), 6700 (1/75-12/80), 7000 (10/71-12/74), 7100 (10/71-12/74), 7200 (10/71-12/74), 7600 (1/75-12/81), 7600 (C (1/75-9/76), 7700 (1/75-12/80), Compatible with Ford Construction and industrial models 231 (1/75-12/81), 233 (1/75-12/81), 333 (1/75-12/81), 420 (10/75-9/78), 515 (10/75-9/78), 531 (1/75-12/81), 532 (10/75-9/78), 3500 (1/65-12/74), 3550 (1/65-12/74), 4400 (1/65-12/74), Replaces Ford OEM number E6NN3K514EA99M, E6NN3K514EA, 81822403, 83911577, 83917191, 83923736, 83924995, 83959533, 87759440, C9NN3A674D, D7NN3A674C, D8NN3K514GA, D8NN3K514GB, D8NN3K574GA, D8NN3K514GC, Replaces manufacturer number 002165, Genuine Dynamatic pump, Manufactured to exact OEM specifications, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 157712) $498.00

Power Steering Pump Repair Kit - Kit repairs the following pumps: E6NN3K514EA, D8NN3K514KC, E0NN3K514AB, and E6NN3K514AB. Note, this kit contains 1 -Double Lip Seal. If your pump uses 2 - Single Lip Seals, use part number DHPN3A674B (Item #: 187034, Ref: 83910651) $13.60

No
Picture
Power Steering Pump, Used - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3150, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4330, 4340, 4400, 4410, 4600, 4600SU, 4610, 4610SU, 5000, 5100, 5200, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532, Replaces Ford OEM number E6NN3K514DA, 83959532, Replaces Ford Casting nos C7NN3K514A, For a new version of this item use Item #: 170931, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 457518) $291.01

Power Steering Seal Kit - Orbital Control Valve and Gear Box Gasket and Seal Kit. For tractor models (4000, 5000 from 7/1970 and up), 4600, 5600. 5610, 6600, 6610, 7000, 7600, 7610. NOTE If you are working on a 5600, 6600, 7600, 5610, 6610 or 7610 you will also need three E0NN3A590AA Teflon seals, sold seperately. Replaces EGPN3N503AA, C9NN3R668A, E1NN3N632AA, C9NN3N598A, C9NN3R669A, C9NN3C615A, 81803034. (Item #: 164631, Ref: EDPN3500A) $15.50

Power Steering Seal Kit - This Power Steering Seal Kit is used on steering gear assemblies. It contains (1) C9NN3747A, (1) C9NN3E614A, (2) C9NN3A590A, (2) C9NN3D624B, (1) E1NN3N632AA. Replaces EGPN3N503AA, 83957121 (Item #: 168433, Ref: EGPN3N503AA) $8.80

Reservoir Cap, Power Steering Pump - Used on E6NN3K514EA, D8NN3K514GC, C9NN3A674D Power Steering Pumps. For tractor models 231, 233, 2600, (3500, 3550 5/1970 to 1975), 3600, (4100 4/1970 to 1975), (420, 4600, 5600, 6600, 7600 1975 to 1981), 4600SU, (5100, 7100 7/1970 to 1975) and others. (Item #: 121241, Ref: D2NN3A006B) $3.70

Spindle Bushing, Bearing and Seal Kit - This Spindle Bushing, Bearing and Seal Kit contains: 2 - C5NN3109A (1 5/8 inch X 2 inch X 1 7/8 inch) Bushings, 2 - C5NN3110A (1 3/4 inch X 2 inch X 1 7/8 inch) Bushings, 2 C0NN3A299A (2 inch ID X 2 7/8 inch OD) Thrust Bearings, 2 - C0NN3A208A (1 1/2 inch X 2 inch X 1/4 inch) Dust Seals. Used on Ford New Holland 5000, 5100, 5110, 5200, 5600, 6410, 6600, 6610, 6810, 7000, 7100, 7200, 7600, 7610 (Item #: 104568, Ref: SBBSKIT05) $31.30

Spindle Bushing, Lower - This Lower Spindle Bushing is measures 2.004 inch outside diameter, 1.760 inch inside diameter, wall thickness .119 inch, 1.860 inch long. It is used on Ford / New Holland 3010S, 4010S, 5000, 5100, 5110, 5340, 5600, 5610, 5610S, 5900, 6410, 6600, 6610, 6610S, 6810, 6810S, 7000, 7100, 7600, 7610, 7610S, 7700, 7810, 7810S, 8000, 8400, 8600, 9000, 9200, 9600. Replaces 81802797, C5NN3110A (Item #: 100641, Ref: C5NN3110A) $4.70

Spindle Bushing, Upper - This Upper Spindle Bushing measures 2 inch outside diameter, 1.645 inch inside diameter, 1.856 inch long, and wall thickness .176 inches. It is used on Ford / New Holland 3010S, 4010S, 5000, 5100, 5110, 5340, 5600, 5610, 5610S, 5900, 6410, 6600, 6610, 6610S, 6810, 6810S, 7000, 7100, 7600, 7610, 7610S, 7700, 7810, 7810S, 8000, 8400, 8600, 9000, 9200, 9600. Replaces 81802792, C5NN3109A (Item #: 100640, Ref: C5NN3109A) $5.10

Spindle Nut - Fits on Front Spindles. Castle Nut 3/4 inch x 16 UNF. Replaces P2060, VLG3307, 351129S, 353928X1, 354573S36, 387930S36, 646060M1, 83416613, 83900513, 83910701, 880284M1, 9073, 98A750N. (Item #: 156038, Ref: 387930S36) $1.10

Spindle Thrust Bearing - This Spindle Thrust Bearing measures: 2 3/64 inch (51mm) inside diameter, 2 15/16 inch (75mm) outside diameter, 5/8 inch (16mm) wide. Replaces 81802870, C0NN3A299A, 138712, 00138712, VPJ2403 (Item #: 100629, Ref: C0NN3A299A) $7.50

Spindle, High Clearance - LH - For Ford tractor models 5100 (1/1968-later), 5200, 5340 (1/1968-later), 5600 (1/1975-10/31/75), 6600 (1/1975-10/31/75), 7000 (10/1971-12/74), 7100 (1/1968-later), 7200, 7600 (1/1975-10/31/75), Replaces Ford OEM number C5NN3106K, Length: 16", Diameter: 1.75", Stem Diameter: 1.625", Stem Diameter: .843", Fits Left Hand Side, (Item #: 161169) $450.00

Spindle, High Clearance - RH - For Ford tractor models 5100 (1/1968-later), 5200, 5340 (1/1968-later), 5600 (1/1975-10/31/75), 6600 (1/1975-10/31/75), 7000 (10/1971-12/74), 7100 (1/1968-later), 7200, 7600 (1/1975-10/31/75), Replaces Ford OEM number C5NN3105N, Length: 16", Diameter: 1.75", Stem Diameter; 1.625", Stem Diameter: 0.843", Fits Right hand side, (Item #: 160192) $593.00

Spindle, LH - This left spindle measures A= 15.937 inches, B= 1.498 inches, C= 1.638 inches, D= 1.748 inches, E 1.624 inches, F= .842 inch. For tractor models 5200 used with 7.50 x 18 x 16 front tires, 6600C used with 10.00 x 16 front tires, 7200 used with 7.50 x 18 x 16 front tires, 7600C used with 10.00 x 16 front tires. The wheel bearing kit used for this spindle is part number WBKFD6. (Item #: 104550, Ref: D2NN3106B) $344.00

Spindle, RH - This right hand spindle measures A= 15.937 inches, B= 1.498 inches, C= 1.638 inches, D= 1.748 inches, E 1.624 inches, F= .842 inch. For tractor models 5200 used with 7.50 x 18 x 16 front tires, 6600C used with 10.00 x 16 front tires, 7200 used with 7.50 x 18 x 16 front tires, 7600C used with 10.00 x 16 front tires. The wheel bearing kit used for this spindle is part number WBKFD6. (Item #: 172970, Ref: D2NN3105B) $362.00

Steering Arm Dust Seal - This Steering Arm Dust Seal fits between the Steering Arm and the Spindle. It measures 1 7/8 Inches (48mm) Outside Diameter, 1 1/2 Inches (38mm) Inside Diameter, 1/4 Inches (6mm) Thick. Replaces 81802845, C0NN3A208A (Item #: 104573, Ref: C0NN3A208A) $4.00

Steering Arm, Left Hand - This Left Hand Steering Arm is used on Ford / New Holland Tractors: 5000, 5100, 5340, 5600, 5610, 6600, 6610, 7000, 7100, 7200, 7600. Replaces C5NN3131B, C5NN3131J, 81813163 (Item #: 104737, Ref: C5NN3131B) $166.00

Tie Rod End - This Tie Rod End is used on Ford New Holland 5200, 7200, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700. 7.375 Inch length, 1.000 Diameter, 16 Right Hand Thread. Replaces 81820108, C7NN3289C (Item #: 104636, Ref: C7NN3289C) $36.60

Tie Rod End - For Ford tractor models 4400, 4410, 5000, 5100, 5200, 5600, 5610, 6000, 6600, 6610, 7000, 7100, 7200, 7600, 7610, 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700, Replaces Ford OEM number E3NN3307AA, C5NN3307F, 3.812" Long, 1" Diameter, 16 Right Hand Thread, (Item #: 100687) $20.50

Tie Rod Tube - This Tie Rod Tube measures 19.15 inches. If a 16 inch tube is needed, order part number C7NN3B624B. Replaces 86547157, C5NN3B624B. (Item #: 104613) $130.00

Tie Rod, Outer, LH - Used on the outer left side of manual steering models 5000, 5100, 5340, 7000, 7100, 7200 all from 1965-1967 with manual steering. This part measures 17.500 inches from the center of the ball joint to the end of the shaft. The shaft diameter is 0.940 inches. Replace 81802856, C5NN3281C (Item #: 104620, Ref: C5NN3281C) $38.60

Tie Rod, Outer, rh - Used on the outer right side of manual steering models 5000, 5100, 5340, 7000, 7100, 7200 all from 1965-1967 with manual steering. This part measures 17.500 inches from the center of the ball joint to the end of the shaft. The shaft diameter is 0.940 inches. Replaces 81802851, C5NN3280F (Item #: 100678, Ref: C5NN3280F) $35.00

Universal Parts and Accessories
Category: Steering

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Item #: 185079, Ref: WSV125A) $128.00

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.20

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.70

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $15.10

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $9.10

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $8.70

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 7200 Parts] [All Ford Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy