(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford 1920 Parts

Category: Tools

[Categories]   [All 1920 Parts]   [All Ford Models]  


Ford 1920 *Combination Wrench Set
*Combination Wrench Set
- This wrench set is 22 pieces and comes with both SAE and Metric measurements. Each wrench is made of polished chrome vanadium steel. They come with a durable plastic rack for handy storage and a LIFE TIME UNLIMITED WARRANTY. The Metric measurements are from: 9 to 19 mm and the SAE measurements are from: 1/4 to 7/8 inch. (Part No: W1069)
$32.09

Ford 1920 Adjustable Cylinder Hone Replacement Stones, Coarse
Adjustable Cylinder Hone Replacement Stones, Coarse
- Set of three 4 inch coarse textured stones with cotter pins for 900542 cylinder hone. (Part No: 900563)
$18.70

Ford 1920 Adjustable Cylinder Hone Replacement Stones, Fine
Adjustable Cylinder Hone Replacement Stones, Fine
- Set of three 4 inch fine textured stones with cotter pins for 900542 cylinder hone. (Part No: 900556)
$18.70

Ford 1920 Adjustable Cylinder Hone Replacement Stones, Medium
Adjustable Cylinder Hone Replacement Stones, Medium
- Set of three 4 inch medium textured stones with cotter pins for 900542 cylinder hone. (Part No: 900549)
$18.70

No
Picture
Blade Fuse Assortment
- With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Part No: S.29891)
$15.23

Ford 1920 Chain Binder
Chain Binder
- 1/4 inch chain binder, 2600 pound load limit. (Part No: LL104)
$36.73

Ford 1920 Chain Binder
Chain Binder
- 3/8 inch chain binder, 5400 pound load limit. Use with either 5/16 inch or 3/8 inch chain. (Part No: LL105)
$42.63

Ford 1920 Chain Binder
Chain Binder
- 1/2 inch chain binder, 9200 pound load limit. Use with either 3/8 inch or 1/2 inch chain. (Part No: LL106)
$79.85

Ford 1920 Combination Wrench Set
Combination Wrench Set
- This combination wrench set is 11 pieces. Each wrench is made of chrome vanadium steel. This set comes in a handy storage rack and includes a LIFETIME UNCONDITIONAL WARRANTY. The SAE sizes range from 1/4 to 7/8 inch. (Part No: W1061)
$22.47

Ford 1920 Compression Tester
Compression Tester
- This tester checks the cylinder compression up to 300 PSI. It fits 14mm and 18mm spark plug threads and is equipped with an air-hold valve, gauge reset button, 11 inch flexible rubber hose, and a complete list of instructions. (Part No: W80579)
$24.36

Ford 1920 Cotter Pin Assortment
Cotter Pin Assortment
- This pin assortment contains 150 pieces, all in a convenient re-sealable plastic case. It includes sizes of: 1/8 inch x 2 inches, 5/32 inch x 2 1/2 inches, 3/16 inch x 3 inches, 1/4 inch x 2 inches, 1/4 inch x 3 inches, 5/16 inch x 2 1/2 inches. (Part No: W5206)
$13.35

Ford 1920 Cotter Pin Assortment, Small
Cotter Pin Assortment, Small
- 560 piece assortment of 1/16 inch x 1 inch, 3/32 inch x 1 inch, 3/32 inch x 1-1/2 inches, 1/8 inch x 1-1/4 inches, 1/8 inch x 2 inches, 5/32 inch x 2-1/2 inches. All in convenient re-sealable plastic case. (Part No: W5205)
$10.06

Ford 1920 Diesel Compression Test Kit
Diesel Compression Test Kit
- This diesel compression kit includes 9 adapters for popular Domestic, Asian, and European vehicles and comes in a protective case. With this kit you can test your compression through the glow plug or the injector holes. The Gauge reads from 0 to 1000 PSI (0-700kPA) and is rated at +/-2 for accuracy. It will fit the following thread sizes: 24 inches x 2 inches, 12 inches x 1 1/4 inches, 10 inches x 1 1/4 inches and 10 inches x 1 inch. (Part No: W89731)
$64.15

Ford 1920 Digital Calipers, Stainless
Digital Calipers, Stainless
- High quality hardened stainless steel digital caliper. Calculates measurements up to 6 inches with SAE and METRIC conversions. Includes convenient carrying case and spare battery. (Part No: CAL6)
$37.35

Ford 1920 GREASE GUN
GREASE GUN
- GREASE GUN. Pistol handle grease gun uses standard 11 inch grease cartridge. Develops 8000 lbs pressure. Pistol design makes it convenient to use. (Part No: GG3121)
$29.17

Ford 1920 GREASE GUN
GREASE GUN
- Spring fed 11 inch barrel grease gun. Uses standard 11 inch grease cartridge. Lever handle develops 10, 000 lbs of pressure. (Part No: GG1080)
$20.66

Ford 1920 GREASE GUN
GREASE GUN
- HEAVY DUTY Grease gun, ultimate gun designed specifically for heavy-duty use and is built to take extreme punishment. (Part No: GG11142)
$36.00

Ford 1920 GREASE GUN CLAMP
GREASE GUN CLAMP
- Clamp holds all 2-1/4 inch diameter barrel hand guns. Bolts or screws anywhere through hole in bracket base. (Part No: GC102)
$11.21

Ford 1920 GREASE GUN POWERLUBER 14.4V BATTERY
GREASE GUN POWERLUBER 14.4V BATTERY
- Battery, Replacement 14.4 Volt NI-CAD rechargeable battery for use with GGPL1442B & GGPL1444B PowerLuber grease gun. (Part No: GGPL1401)
$134.19

Ford 1920 GREASE GUN POWERLUBER 14.4V with CASE 1 BAT
GREASE GUN POWERLUBER 14.4V with CASE 1 BAT
- Grease gun 14.4 Volt PowerLuber. Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, 14.4 volt NI-CAD rechargeable battery, 30 inch flex hose with spring guard and custom carrying case to hold two rechargeable batteries. (Part No: GGPL1442B)
$288.95

Ford 1920 GREASE GUN POWERLUBER 14.4V with CASE 2 BAT
GREASE GUN POWERLUBER 14.4V with CASE 2 BAT
- Grease gun 14.4 Volt PowerLuber. Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, (2) 14.4 volt NI-CAD rechargeable batteries, 30 inch flex hose with spring guard and custom carrying case to hold two rechargeable batteries. (Part No: GGPL1444B)
$403.25

Ford 1920 GREASE HOSE 12 INCH
GREASE HOSE 12 INCH
- 12 inch flexible grease gun hose. Sold in quantities of 2, PRICE IS FOR EACH. (Part No: G115)
$11.62

Ford 1920 GREASE HOSE 18 INCH
GREASE HOSE 18 INCH
- 18 inch flexible grease gun hose. Sold in quantities of 2, PRICE IS FOR EACH. (Part No: G118)
$10.59

Ford 1920 Hair Pin Assortment
Hair Pin Assortment
- This hair pin assortment contains 150 pieces. It includes 6 different sizes from: 3/32 x 1 3/16 inches to 5/32 x 2 15/16 inches. All in a convenient re-sealable plastic case. (Part No: W5210)
$8.90

No
Picture
Hay Moisture Tester
- Self Calibrating Electronic Moisture Tester. (Part No: S.58474)
$267.39

Ford 1920 Hobby Tool Kit
Hobby Tool Kit
- This is a complete knife kit. It comes with a 3 inch caliper, tweezers, a precision screwdriver, 28 blades, and a carrying case. (Part No: W1709)
$25.40

Ford 1920 Hose Clamps Assortment
Hose Clamps Assortment
- This hose clamp assortment contains 26 pieces, all in a convenient re-sealable plastic case. It includes sizes of: 5/8 inch, 7/8 inch, 1 inch, 1 1/16 inches, 1 1/4 inches and 1 1/2 inches. (Part No: W5348)
$8.62

Ford 1920 MULTI TESTER
MULTI TESTER
- Compact size meter for testing volts (up to 500 Volts), OHMS and AMPS. Includes color coded test probes and instruction booklet. Uses AA batteries, not included. (Part No: ETA66420)
$18.86

Ford 1920 Main Seal Installer\Remover
Main Seal Installer/Remover
- This kit helps with the removal and installation of upper rear main seals on many tractor engines without removing the engine or the crankshaft. This kit contains a corkscrew removal tool, a T-handle, and a wire with a clip for pulling new seals into their place. It also includes 2 extra clips. (Part No: W84019)
$5.33

Ford 1920 O-Ring Assortment
O-Ring Assortment
- This O-ring assortment contains 407 pieces in 32 different sizes, all in a convenient re-sealable plastic case. Each O-ring is made of a high quality nitrile butadiene rubber and range in size from 1/4 inch outside diameter to 2 1/4 inches outside diameter. (Part No: W5202)
$17.51

Ford 1920 Piston Ring Groove Cleaner
Piston Ring Groove Cleaner
- This piston ring groove cleaner helps clear any carbon and deposits from piston ring grooves. It includes two 5 cutter wheels for a total of 10 different groove cleaning sizes: SAE: 1/16 inch, 5/64 inch, 3/32 inch, 1/8 inch, 5/32 inch, 3/16 inch and 1/4 inch. Metric: 1.5, 1.75 and 2 mm. (Part No: W80576)
$13.70

Ford 1920 Rotary Tool Kit
Rotary Tool Kit
- This 80 piece rotary tool kit includes: a hand held rotary tool that turns at 1600 rpm, cut off wheel mandrel, polishing cloth wheels, mandrel for polishing cloths, carbide burr, collets, sanding drums and sleeves, buffing wheels, dressing stone, and drill bits. This kit is great cutting, grinding, polishing, sharpening, and drilling. (Part No: W50083)
$20.33

Ford 1920 Screwdriver Set
Screwdriver Set
- This screwdriver set is 30 pieces. It contains 7 screwdrivers that range in size from 1/4 to 6 inches, a magnetic bit driver, 6 precision screwdrivers, and 14 power bits, all contained in a plastic rack. (Part No: W1718)
$24.70

Ford 1920 Spring Assortment
Spring Assortment
- This spring assortment contains 200 pieces. It includes compression type sizes from: 9/32 inch x 1/2 inch to 7/32 inch x 1 1/2 inches and extension type sizes from: 13/64 inch x 13/16 inch to 11/32 inch x 1 7/16 inches. (Part No: W5200)
$8.54

Ford 1920 Step Drill Bit Set
Step Drill Bit Set
- This 3 piece stepped drill bit set is made of titanium nitride coated high speed steel and can be used on metal, wood, or plastic. Each bit has a 1/4 inch hex shank. Since they start on contact, there is no center punch required. They also automatically deburr holes as you drill. (Part No: W9003)
$18.40

No
Picture
T-Handle Hex Key Set
- This T-Handle hex key set is 10 pieces (SAE). Each key is made of a high quality carbon steel with a black oxide finish that resists corrosion. The PVC T-Handle grips are added for better torque and comfort. This set also comes with a mountable hand storage rack. The sizes are: 3/32 inch, 7/64 inch, 1/8 inch, 9/64 inch, 5/32 inch, 3/16 inch, 7/32 inch, 1/4 inch, 5/16 inch and 3/8 inch. (Part No: W80274)
$21.34

No
Picture
Torque Wrench
- This 1/2 inch drive adjustable torque wrench is made of chrome plated alloy steel. It has a reversible ratchet head that is in both the SAE and Metric scale. The torque range is from 10 to 150 lb and has 1 lb graduations. (Part No: M200DB)
$36.81

Ford 1920 Valve Spring Tool
Valve Spring Tool
- Universal valve spring tool compresses springs without needing to remove the cylinder head. For most overhead valve engines. It's adjustable cam handle keeps the tool correctly adjusted for the entire job. It comes with a complete list of instructions. (Part No: W80567)
$23.43

Ford 1920 WIRE STRIPPER 4-WAY
WIRE STRIPPER 4-WAY
- 4-way wire stripper/crimper tool, cuts wire 10 gauge and lighter. Strips wire 10-22 gauge, crimps solderless terminals. (Part No: ETA66223)
$7.51

Ford 1920 Winch Remote, Wireless
Winch Remote, Wireless
- Used with winch sets 3013-0002 and 3013-0001. (Part No: 3013-0003)
$22.48

Ford 1920 Winch Set, 2500 Lb
Winch Set, 2500 Lb
- Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0002)
$110.33

Ford 1920 Winch Set, 2500 Lb
Winch Set, 2500 Lb
- Universal 12 volt with Hand held remote. (Part No: 3013-0004)
$110.33

Ford 1920 Winch Set, 3500 Lb
Winch Set, 3500 Lb
- Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0001)
$124.13

Ford 1920 Winch Set, 3500 Lb
Winch Set, 3500 Lb
- Universal 12 volt with Hand held remote. (Part No: 3013-0005)
$124.13

Ford 1920 Wire Terminal Assortment
Wire Terminal Assortment
- This wire terminal assortment is 160 pieces and contains 19 of the most popular sizes and types of wire terminals. This kit comes in a convenient re-sealable plastic case. (Part No: W5213)
$16.56

Ford 1920 Woodruff Key Assortment
Woodruff Key Assortment
- 80 pieces. Includes 10 each of: 3 x 5 x 13 MM, 3 x 6.5 x 16 MM, 4 x 5 x 13 MM, 4 x 6.5 x 16 MM, 4 x 7.5 x 19 MM, 5 x 7.5 x 19 MM, 5 x 9 x 22 MM, 6 x 9 x 22 MM. All in a convenient re-sealable plastic case. (Part No: W5341)
$12.05

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Tools

[Categories]   [All 1920 Parts]   [All Ford Models]  







PayPal


Customer Service
Monday - Friday
9:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure


  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2015 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.