FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 6810 Parts

Category: Steering

[Categories] [All 6810 Parts] [All Ford Models]

Axle Fork and Shaft, Outer - Carraro 4WD front ends on Ford models 5610, 6610, 6810, 7610, 7710, 250C, 260C, 345C, 345D, 445A, 445C, 445D, 450, 455C, 545A, 545C, 545D, 555B, 555C, 555D, 655, 655A, 655C. This part replaces 83952526, CAR40760, N13510 (Item #: 156151, Ref: CAR40760) $251.64

Axle Pivot Pin Bushing - For Ford tractor models TW10, TW20, TW30, 3500, 4400, 5000, 5100, 5110, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7100, 7600, 7610, 7700, 7710, 7740, 8000, 8240, 8340, 8600, 8700, 9000, 9600, 9700, Compatible with Ford Construction and industrial models 3550, Replaces Ford OEM number C5NN3446A, 81802940, 81941357, 1.50" O.D., 1.247" I.D., 1.375" Long, Rear Bushing, (Item #: 111730) $3.20

Ball Bearing Assembly - The is an open, deep groove bearing. It has applications in transmissions as well and is CAR MFWD front ends. It measures: 60mm (2.362 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces manufacturer part numbers: 6212, 32306, ST269A, 3114946R91, K261879, 83930318, 20141040, CAR25813, 28996590, C5NN7127B, 81804781, 80996590, 20140, 253072272, 8101-06212, 1440545X1, 24101-62124, 971043 (Item #: 156046, Ref: C5NN7127B) $26.50

Ball Joint and Rod - This part is 7.540 inches long and M20 X 1.5 right hand thread. 5110, 5610, 5900 (MEXICO), 6410 (UK ONLY), 6610, 6710 (FLAT DECK), 6810, 7410, 7610, 7710 (FLAT DECK). Replaces original part numbers 83957098, F198300100030, ZP0501310060. (Item #: 104398, Ref: ZP0501310060) $53.00

Ball Joint and Tube, Left Hand - This Left Hand Ball Joint and Tube is used on tractors with ZF Four Wheel Drive Axles. 5110, 5610, 5900 (MEXICO), 6410 (UK ONLY), 6610, 6710 (FLAT DECK), 6810, 7410, 7610, 7710 (FLAT DECK) Replaces original part numbers 83959474, 83984962, ZP0501205468, ZP0501206190. (Item #: 104674, Ref: ZP0501206190) $106.37

Ball Joint and Tube, Right Hand - This Right Hand Ball Joint and Tube is used on tractors with ZF Four Wheel Drive Axles. 5110, 5610, 5900 (MEXICO), 6410 (UK ONLY), 6610, 6710 (FLAT DECK), 6810, 7410, 7610, 7710 (FLAT DECK. 13.375 inches long with M22 X 1.5 RH Thread. Replaces original part numbers 83959475, 83984963, ZP0501205469, ZP0501206191. (Item #: 104673, Ref: ZP0501206191) $91.00

Bearing Assembly - On ZF Axle APL 335 this bearing sits between the axle housing and the spindle. It measures 25mm inside diameter, 52mm outside diameter, 19.25mm wide. Replaces ZP0750117169, 412287, ZP0635900468, 81294C1, 412287, 32205 (Item #: 158092, Ref: ZP0750117169) $25.80

Bearing Assembly - On APL 335 Axles, the bearing is located behind the input gear set. It replaces OEM numbers 83945716, 83985018, ZP0750117352, 87387938, 268735, 5143109, ZP0735370350, 81214C1, 455387C91 (Item #: 180113, Ref: ZP0735370350) $181.00

Bearing Assembly - On APL 335 Axles, the bearing is located behind the input gear set, closest to the back of the tractor. Measures 31.75mm inside diameter, 68.26mm outside diameter, 22.225mm wide. Replaces OEM part numbers 671031R91, K620116, 671032R1, ZP0735370840, 81232C1, 671033R1, 81231C1, 83985012, 86516897, AL71100, L60075, L60076 (Item #: 180111, Ref: ZP0735370840) $25.60

Cross and Bearing Kit - A= 1.18 inch, B= 1.18 inch, C= 3.62 inch, D= 3.62 inch. For tractor models 5110, 5610, 5610S, 6410, 6610, 6610S, 6810, 6810S, 7010, 7610, 7610S, 7710, 7810, 7810S, 7910, 8010, 8210 all with MFWD. Replaces E7NN4635AA. (Item #: 156127, Ref: 83959516) $61.00

Differential Pinion Bearing - Used on Mechanical Four Wheel Drive axles APL325, APL335, APL345, APL350, and APL355, this bearing is used with the pinion gears closest to the hub. Replaces E2NN1N055AA, 135700421044, 81326C1, 83927802, 83934020, 153317487, 1429562, M382179, 1-31-742-032, 04350447, F198300020650, E1NN1N055AB, JD10250, AL39377. (Item #: 112468, Ref: 81326C1) $43.50

Differential Pinion Bearing - Used on mechanical four wheel drive front ends, this open roller bearing measures 1.42 inches inside diameter, 2.28 inches outside diameter and 0.78 inches wide. Replaces OEM numbers International Harvester - 81326C1, Ford/New Holland - 83934020, E2NN1N055AA, John Deere - AL39377, JD10250 (Item #: 112468, Ref: VPJ2550) $43.50

Differential to Axle Housing Seal - On ZF Axles, this o-ring goes between the deferential case and the axle housing. Used on APL 325 and APL 335 axles. Replaces E1NN3N267AA, 81279C1, 83927734, L40306 (Item #: 156189, Ref: E1NN3N267AA) $2.20

Drive Shaft - Used on ZF Axle APL335 this shaft is found on Ford tractors 5110, 5610, 6410, 6610, 6810, 7610 with mechanical four wheel drive. Used in production from 5/1984 - 1/1987. Replaces ZP4472352075, ZP0769126310, 83949049, 81320C1 (Item #: 124728, Ref: ZP0769126310) $42.90

No
Picture
Front Axle Housing - Left Hand - For Ford tractor models 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7810, 7810S, 7910 Replaces Ford OEM number CAR1203271, 81867870, , Compatible with New Holland tractor models 7010, 8010, (Item #: 191011) $1613.56

Front Axle Oil Seal - Used on some Carraro 4WD front ends, the seal replaces OEM numbers 153326217, 5122548, 5105932, CAR115715, 83944350, K262811, K395039, EQ501510 (Item #: 156134, Ref: CAR115715) $9.64

Front Axle Pinion Shaft Seal - Used on APL 335 Mechanical Four Wheel Drive Axles, this seal is located at the input shaft to the differential. Replaces OEM numbers 83945747, ZP0750110088, 81233C1 (Item #: ZP0750110088) $32.27

Half Shaft Bushing - Used on ZF MFWD Axles this busing measures 1.462 inches inside diameter, 1.616 outside diameter, and 1.259 long. Replaces OEM numbers 81429C2, 81429C1, 83956842, L40017, L60747, ZP0730260617. Used on Ford models: 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7910, 8210, 8210 (Item #: 124593, Ref: L60747) $12.80

Half Shaft Bushing - Measuring 1.457 inches inside diameter, 1.638 inches outside diameter and 1.024 inches wide, this is the inner bushing on ZF APL325 Mechanical Four Wheel Dive axles. Replaces OEM part numbers 81410C2, 83956843, L60748, L40018, ZP0730260616. This front axle can be found on the following Ford models: 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7910, 8210 (Item #: 124592, Ref: L60748) $14.20

Half Shaft Bushing - Measuring 1.815 inches inside diameter, 1.971 inches outside diameter and 0.985 inches wide, this is the inner bushing on ZF APL335 Mechanical Four Wheel Dive axles. Replaces OEM part numbers 81287C2, 83956845, L60147, ZP0730260618. This front axle can be found on the following Ford models: 5610, 6410, 6610, 6810, 7610 (Item #: 158091, Ref: L60147) $35.60

Hub Seal, Inner - Found in many MFWD (mechanical four wheel drive) front ends, this seal measures 4.80 inches inside diameter, 5.90 inches outside diameter, 0.53 inch width. It replaces OEM numbers 81869544, 83946025, 83932098, 83927796, E1NN1214AC, 1456320, ZP0734309421, ZP0750110140, ZP0734317062, ZO0750110147, ZP0750110147, AL68210, 84295352, 81311C1, 1964235C1, 1964235C2, 81309C1, 81310C1 (Item #: 124718, Ref: ZP0750110147) $58.00

Hub Seal, MFWD - Extensively used on Carraro mechanical four wheel drive front axles, this hub seal measures 149mm (5.86614 inches) x 176mm (5.86614 inches) x 16mm (0.629921 inches). Replaces OEM numbers 9968085, K395102, 47108806, 83996064, 82920209, 294169A1, 247877A1, 130182A1, 1349265C1, CAR126324, CAR47705, 3225110, 0003225110, 82920209, 3996064, 83996064, 83957862, 9968085, 153326219, 153326621, 1349265C1, 153326301, 09968085, 83952509, 83952530, CAR118556, CAR126324, CAR47705, CAR126390, 3501510M1, 3475598M1, 3475533M1, 3523062M1, 3541510M1 (Item #: 157753, Ref: 247877A1) $56.00

Hub Seal, Outer - Used on many MFWD (mechanical four wheel drive) front ends, this seal has an Inside Diameter of 1.814 inches, Outside Diameter of 2.568 inches, and Width of 0.671 inches. It replaces OEM numbers 1429645, 81288C1, 81288C3, 83959483, ZP0750110134, AL61448, AL39338, 31372000, V31372000 (Item #: 104716, Ref: ZP0750110134) $19.30

Joint Assembly, MFWD - Used on ZF APL325 Mechanical Four Wheel Drive front ends, this part replaces OEM part numbers 1968450C1, 81430C1, 83961165, AL63606, AL38018, AL64250, ZP7029910201. This axle was used on Ford models: 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7910, 8210 (Item #: 156193, Ref: AL63606) $596.00

King Pin - Ford / New Holland models 5110, 5610, 6410, 6610, 6810, 7610 use this king pin with equipped with MFWD (Mechanical Four Wheel Drive) ZF Axle APL 335. This front end was used in production from 5/1984 - 1/1987. Replaces OEM part numbers ZP4472352062, ZP4472352162, 81305C1, 83949007, 83946018, L61209, 380303020490, F380303020490, 81305C2, 380303000000 (Item #: 156196, Ref: ZP4472352162) $104.00

King Pin - Mechanical Four Wheel Drive, Carraro front ends use these king pins at the hubs. This king pin replaces OEM part numbers CAR115729, K395035, 83957144 (Item #: 156166, Ref: CAR115729) $71.00

King Pin Thrust Bearing - Used on several Carraro 4WD front ends, this 2 piece bearing set replaces OEM numbers N14373, 47109506, 3523057M1, 47895578, 123726, 137700410834, 153326668, 1964243C1, 14373, 83982416, 83944349, 87523063, K395040, 87521218, 47123701, 9968002, CAR123726, CAR115714, 3541402M1, 3475530M1, 3523057M1, EQ501557, ER123726 (Item #: 156136, Ref: CAR123726) $24.40

MFWD Joint Assembly - If you have a ZF Axle number APL335, this universal joint closest to the wheel, behind the hub. This was original equipment from 5/1984 - 1/1987 with APL335 Axle. Ford 5110, 5610, 6410, 6610, 6810, 7610. Replaces OEM numbers 83961173, 83946022, ZP7029910301, ZP0501205313, 1968452C1, 81307C1, 81307C2. (Item #: 156194, Ref: ZP7029910301) $591.00

MFWD Shaft Bushing - The dimensions of this bushing are 1.815 inside diameter x 1.971 outside diameter x 0.985 long. It is used in many MFWD (Mechanical Four Wheel Drive) front ends. Replaces OEM part numbers 9579217, 87791108, ZP0750101010, ZP0730260618, 83956845, 81287C2, 84996796, 81287C1, 83945712, 81287C1, 81287C2, L60147 (Item #: 158091, Ref: ZP0730260618) $35.60

MFWD Universal Joint - Used on APL axles 335, 325, 350, 345, 1351, 1551, this universal joint measures 34mm (1.339 inches) x 97mm (3.819 inches). Replaces OEM numbers ZP1927603, ZP1927831, 83934998, 81927603, 81927831, 81927603, ZP0501205340, 83956477, E3NN4635AA (Item #: 173025, Ref: E3NN4635AA) $159.00

$Ford 6810 O-Ring \ Seal$
O-Ring / Seal - Made of Nitrile Rubber, this o-ring measures 7.874 inches inside diameter with a 0.118 inch thickness. It is used in many mechanical four wheel drive systems. Replaces OEM numbers 81313C1, 81326C1, 1-31-742-032, 71452157, E1NN1N050AA, 83927797, L40317, AL40317 (Item #: 156198, Ref: E1NN1N050AA) $6.90

Outer Bushing, MFWD - Used on ZF Axles APL345, APL350, APL1351, APL1551, this bushing measures 1.813 inches inside diameter, 1.973 inches outside diameter and 1.182 inches wide. The bushing replaces OEM numbers 83956846, 87791108, L60088, 81306C1, ZP0730260619. Used on Ford / New Holland models: TW5, TW15, TW25, 5110, 5610, 6410, 6610, 6710, 6810, 7610, 7710, 7910, 8210 (Item #: 156192, Ref: L60088) $43.70

Pivot Pin Seal, MFWD - For ZF APL325 or APL350 Mechanical Four Wheel Drive front axles, this o-ring has a 1.346 inch inside diameter and is 0.118 inches thick. Replaces OEM numbers 81419C1, 83927817, E1NN3125AA, L53819. These axles can be found on Ford models: 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7910, 8210 (Item #: 124690, Ref: L53819) $2.60

Planetary Gear - Used in APL 335 Axles, on tractors with mechanical four wheel drive, the is the gear closest to the hub. Sold individually. Replaces OEM numbers ZP4472352014, ZP0769126276, 83946053, 81325C1. Used 5/1984 - 1/1987 on Ford 5110, 5610, 6410, 6610, 6810, 7610 (Item #: 124634, Ref: ZP4472352014) $118.84

Planetary Ring Gear - Found on ZF Axle APL 335, this Planetary Ring Gear is used on Ford 5110, 5610, 6410, 6610, 6810, 7610 built between 5/1984 and 1/1987. Replaces 83954879, 83946031, ZP4472352168, ZP4472352058 (Item #: 124705, Ref: ZP4472352168) $571.00

Power Steering Cylinder End - Power Steering End left hand (outer), 1.250 inches-12 right hand thread, 2.875 inches long to center of post. Tractors: 5110, 5610, 5610S, 5900, 6410, 6610, 6610S, 6810, 6810S, 7010S, 7610, 7610S, 7810, 7810S. Replaces E3NN3N981AA, 83948964. (Item #: 104640, Ref: E3NN3N981AA) $38.60

Power Steering Cylinder End - Power Steering End right hand (inner), .875 inch-14 thread female, 3.625 inches long to center of post. Tractors: 3010S, 4010S, 5100, 5110, 5600, 5610, 5610S, 5900, 6410, 6600, 6610, 6610S, 6710, 6810, 6810S, 7010, 7100, 7600, 7610, 7610S, 7810, 7810S, 8010. Verify Part number to ensure proper fit. (Item #: 100683, Ref: E3NN3B539AA) $32.00

Power Steering Cylinder Seal Kit - For Ford tractor models 3230, 3430, 3930, 4130, 4630, 4830, 5030, 5610, 6610, 6810, 7610, 7710, 7810, 7910 Replaces Ford OEM number CAR49101, 83957762, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, 6610S, 7610S, 8010, Replaces Carraro manufacturer number 49101, For 4WD only, (Item #: 114027) $48.60

Power Steering Cylinder, 2 WD - For tractor models 5900, (5610, 6610, 6810, 7610, 7810 4/1985 and up), (5610S, 6610S, 7610S, 7810S 1/1994-5/1996). VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Item #: 160292, Ref: E3NN3A540BA) $275.00

Power Steering Pump - Dynamatic, E6NN3K514AB - For Ford tractor models 5110 (5/84-10/91), 5610 (1/81-12/93), 5610 (S (12/93-later), 6610 (1/81-12/93), 6610 (O (5/84-10/91), 6610 (S (12/93-later), 6810 (4/89-10/91), 7610 (1/81-10/91), 7610 (O) (10/81-12/91), 7610 (S (1/94-later), 7810S (12/93-7/97), Replaces Ford OEM number E6NN3K514AB, 83960261, E4NN3K514AA, E4NN3K514AB, Genuine Dynamatic pump, Manufactured to exact OEM specifications, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, For an economy version of this item use Item #: 119846, (Item #: 157621) $463.00

Reservoir Cap, Power Steering Pump - Used on E6NN3K514EA, D8NN3K514GC, C9NN3A674D Power Steering Pumps. For tractor models 231, 233, 2600, (3500, 3550 5/1970 to 1975), 3600, (4100 4/1970 to 1975), (420, 4600, 5600, 6600, 7600 1975 to 1981), 4600SU, (5100, 7100 7/1970 to 1975) and others. (Item #: 121241, Ref: D2NN3A006B) $3.70

Roller Bearing with Cup MFWD - Used on ZF APL315, APL325, and APL330 Mechanical Four Wheel Drive Axles, the pivot bearing replaces OEM part numbers 1342525C2, 1342525C1, 81416C1, 81417C1, 83958377, AL63617, ZP0750117306, LM72848 and LM72810. These axles can be found on Ford models: 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7910, 8210 (Item #: 124691, Ref: AL63617) $47.40

Seal, Spindle Pin - For tractor models 1801, 250C, 260C, 3000, 340, 340A, 340B, 345C, 345D, 3500, 3550, 4000, 4040, 4140, 420, 4400, 445, 445A, 445C, 450, 4500, 455, 5110, 515, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 5610, 6410, 655, 655A, 6610, 6610O, 6810, 7010, 4610O, 8010, TT55, TT75. (Item #: 128511, Ref: TDBA3125A) $2.90

Self Locking Nut - Tie Rod End - For Ford tractor models 3230, 3430, 3930, 4130, 4630, 4830, 5030, 5110, 5610, 6410, 6610, 6810, 7610, 7710, 7810, 7910 Replaces Ford OEM number CAR22437, 85805982, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, 6610S, 7010, 7610S, 8010, Replaces New Holland OEM number CAR22437, 85805982, Replaces Carraro manufacturer number 22437, M18 x 1.5, (Item #: 159936) $3.87

Spindle Bushing, Bearing and Seal Kit - This Spindle Bushing, Bearing and Seal Kit contains: 2 - C5NN3109A (1 5/8 inch X 2 inch X 1 7/8 inch) Bushings, 2 - C5NN3110A (1 3/4 inch X 2 inch X 1 7/8 inch) Bushings, 2 C0NN3A299A (2 inch ID X 2 7/8 inch OD) Thrust Bearings, 2 - C0NN3A208A (1 1/2 inch X 2 inch X 1/4 inch) Dust Seals. Used on Ford New Holland 5000, 5100, 5110, 5200, 5600, 6410, 6600, 6610, 6810, 7000, 7100, 7200, 7600, 7610 (Item #: 104568, Ref: SBBSKIT05) $31.30

Spindle Bushing, Lower - This Lower Spindle Bushing is measures 2.004 inch outside diameter, 1.760 inch inside diameter, wall thickness .119 inch, 1.860 inch long. It is used on Ford / New Holland 3010S, 4010S, 5000, 5100, 5110, 5340, 5600, 5610, 5610S, 5900, 6410, 6600, 6610, 6610S, 6810, 6810S, 7000, 7100, 7600, 7610, 7610S, 7700, 7810, 7810S, 8000, 8400, 8600, 9000, 9200, 9600. Replaces 81802797, C5NN3110A (Item #: 100641, Ref: C5NN3110A) $4.70

Spindle Bushing, Upper - This Upper Spindle Bushing measures 2 inch outside diameter, 1.645 inch inside diameter, 1.856 inch long, and wall thickness .176 inches. It is used on Ford / New Holland 3010S, 4010S, 5000, 5100, 5110, 5340, 5600, 5610, 5610S, 5900, 6410, 6600, 6610, 6610S, 6810, 6810S, 7000, 7100, 7600, 7610, 7610S, 7700, 7810, 7810S, 8000, 8400, 8600, 9000, 9200, 9600. Replaces 81802792, C5NN3109A (Item #: 100640, Ref: C5NN3109A) $5.10

Spindle Kit, Complete - Spindle repair kit less spindle with unfinished bushings Contains (2) TDBA3110A bushings (Unfinished), (2) 87414 grease fittings, (1) D8NN3115BA 1.13 inch diameter pin, (1) C7NN3123A thrust bearing, (2) TDBA3125A seals, (1) 81T3122 spindle pin locking pin, (1) 81547 lock washer and (1) 50456 nut. Replaces DEPN3115A. (Item #: 125389, Ref: S.75082) $109.00

Spindle Seal MFWD - On Mechanical Front Wheel Drive tractors, the seal (o-ring) goes between the axle housing and the spindle. It is used on many ZF Axles. Replaces OEM part numbers 81296C1, 83946009, 8603728, 3147244R1, ZP0634303409, 1390411028, 81296C1, 1964258C1, 3147244R1 (Item #: 124682, Ref: 83946009) $0.70

Spindle Thrust Bearing - This Spindle Thrust Bearing measures: 2 3/64 inch (51mm) inside diameter, 2 15/16 inch (75mm) outside diameter, 5/8 inch (16mm) wide. Replaces 81802870, C0NN3A299A, 138712, 00138712, VPJ2403 (Item #: 100629, Ref: C0NN3A299A) $7.50

Spindle, Heat Treated - Left Hand - For Ford tractor models 5100, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7100, 7600, 7610, Replaces Ford OEM number D6NN3106A, Dimension A: 16.000", Dimension B: 1.498", Dimension C: 1.638", Dimension D: 1.784", Dimension E: 1.625", Dimension F: .842", Left Side, Front wheel bearing kit use Item #: 100663, (Item #: 104547) $281.00

Spindle, Heat Treated - Right Hand - For Ford tractor models 5100, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7600, 7610, Replaces Ford OEM number D6NN3105A, Dimension A: 16.000", Dimension B: 1.498", Dimension C: 1.638", Dimension D: 1.748", Dimension E: 1.625", Dimension F: .842", Right Side, (Item #: 104549) $257.00

Steering Arm - Left Hand - For Ford tractor models 5100, 5110, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7100, 7600, Replaces Ford OEM number E3NN3131AA, LH Steering Arm, (Item #: 104739) $119.00

Steering Arm - Left Hand, Used - For Ford tractor models 5100, 5110, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7100, 7600, Replaces Ford OEM number E3NN3131AA, Left Hand Steering Arm, For a new version of this item use Item #: 104739, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 446689) $70.01

Steering Arm - Right Hand - For Ford tractor models 5100, 5110, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7100, 7600, 7610, Replaces Ford OEM number E3NN3130AA, RH Steering Arm, Tie rod attaches to top of steering arm, (Item #: 104738) $141.00

Steering Arm - Right Hand, Used - For Ford tractor models 5100, 5110, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7100, 7600, 7610, Replaces Ford OEM number E3NN3130AA, Tie rod attaches to top of steering arm, Right Hand Steering Arm, For a new version of this item use Item #: 104738, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 446688) $78.01

Steering Column Grommet - For tractor models 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6000, 6600, 7000, 7600, 2310, 2610, 2810, 2910, 3010, 3110, 3310, 3610, 3910, 4010, 4110, 4410, 4610, 5010, 5110, 5610, 5910, 6410, 6610, 6710, 6810, 7010, 7310, 7410, 7610. 2-7/8 inch outside diameter X 1-1/4 inch inside diameter. (Item #: 126705, Ref: D2NN3A566B) $4.00

Steering Hand Pump, Remanufactured, 86602557, E4NN3A244AA - For Ford tractor models 5110, 5610, 5900, 6410, 6610, 6810, 7610, Replaces Ford OEM number 86602557, E4NN3A244AA, Includes pressure relief valve, (Item #: 206352) $1200.01

Steering Joint - This Steering Joint is 7.040 over all length. The Inner Thread is M20 X 1.5 RH Thread. The Outer Thread is M18 X 1.5 LH Thread. Replaces 1966127C1, 83957148, CAR49006, 1-33-743-602, 112508A1 (Item #: 104634, Ref: CAR49006) $57.00

Steering Motor - For tractor models 5610, 6610, 6810, 7610, 5610S, 6610S, 7610S, 7810S, 5900. Replaces OEM 86602590. (Item #: 113202, Ref: E4NN3A244AA) $590.00

Steering Sector Shaft Seal - Two of these felt seals are used per tractor. It measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476 (Item #: 124494, Ref: 8N3586) $2.20

Steering Wheel - This Steering wheel is 15 inch diameter with a 36 spline center hub. PVC grained cover material with covered spokes. For tractor models 2310, 2600, 2610, 2810, 2910, 3230, 3430, 3600, 3610, 3900, 3910, 3930, 4110, 4130, 4600, 4610, 4630, 4830, 5110, 5610, 5900, 6410, 6600, 6610, 6810, 7010, 7610, 8010, Industrials: 230A, 231, 233, 234, 333, 334, 335, 340, 530A, 531, 540, 545A, 555B. Replaces OEM number D2NN3600A, D7NN3600A. (Item #: 101427, Ref: D7NN3600A) $41.10

Taper Roller Bearing - Measuring; Width - 0.548 inches, Inside Diameter - 3.740 inches, Outside Diameter - 5.315 inches, this bearing is used in ZF Axles on tractors with mechanical four wheel drive. This bearing also has other applications. Replaces OEM numbers: ZP0750117062, 5136951, 83946047, 81312C1, 83927807, 47539809, 1-31-741-019, 05136951, 85136951, 85806002, 1966169C1, CAR118378, 83983456, AL38099, RE45944, 819310, 819349/819310, 819349 (Item #: 156177, Ref: ZP0750117062) $86.82

Tie Rod - This Tie Rod has 200mm (8.625 Inches) usable length shaft, 18mm X 1.5 RH thread. This is the newer style tie rod and does not use a clamp. This style requires jam nut # 87313796 currently not offered by YT. It replaces CAR48983, CAR49005, 83957757, 81878545, 81878555 (Item #: 159857, Ref: CAR49005) $65.00

Tie Rod Assembly - Left Hand - For Ford tractor models 5110, 5610, 5900 (Mexico only), 6410 (UK only), 6610 (01/82 - 01/87), 6710, 6810, 7410, 7610 (with APL335 Axle), 7710 (with APL325 Axle), Replaces Ford OEM number ZP0501205206, 83956514, Fits Left Hand Side, (Item #: 104631) $337.00

Tie Rod Assembly - Right Hand - For Ford tractor models 5110, 5610, 5900 (Mexico only), 6410 (UK only), 6610 (All 01/82 - 01/87), 6710, 6810, 7410, 7610 (All 01/82 - 04/84), 7710 (All Flat Deck), Replaces Ford OEM number ZP0501205207, 83956515, (Item #: 104630) $320.00

Universal Joint - Measuring 27mm 1 1/16 inches) x 70mm (2 3/4 inches) this universal joint is used on the axle of APL 335, 325, 345, 350, and 300. Replaces OEM numbers ZP7029457207, 83964587, 84355357, ZP7029457210, 1342711C1, 81873051, 144465A1, 1342715C1, 83956476, ZP0501205345, 9968059, 247543A1, AL64126 (Item #: 124613, Ref: 1342711C1) $102.00

Universal Joint - The measurements on this Universal Joint are 27mm cup diameter and 82mm across. Side greaser included. This Universal Joint is used on Carraro 4WD front axles. Replaces OEM numbers CAR96867, CAR116859, 3230277R1, 3216550R91, 137700420834, 1967554C1, 84512487, NH80715, 9961774, 9962244, 87760752, K965331, CAR041121, CAR116859, 83934724, 81927841, ZP1927504, ZP1927841, 3230277R1, 84512487, 83957857, AL32885, 137700000000, 3475808M91, 3475808M1, 3427352M91, 1895699M1 (Item #: 156129, Ref: CAR96867) $37.10

Universal Joint - Many mechanical four wheel drive front axles use this universal joint. This part has 27mm cup diameter and is 70.9mm across (1.063 X 2.791 inches). Replaces OEM numbers 247543A1, 81882C1, 1-33-742-629, 137700420872, 144461A1, 137700420874, 195215A1, 337260A1, D149733, B507526, CAR40869, N14156, N14411, 9968059, 84355357, 85807283, 84990205, 9970163, 85805996, 87306931, CAR40889, 81874740, 85805996, 9968059, 09968059, 1-33-742-629, CAR40825, 84355357, AL71316, RE212902, ABP3002508, 508360, ABP3004431 (Item #: 158432, Ref: CAR40825) $57.00

Universal Joint - Used between the two halves of an axle assembly on Carraro MFWD front ends, this universal joint has 27mm cup diameter and is 74.60mm across. Replaces OEM numbers 107625, 83930383, CAR107625, 84355315, 21.00.00, K262161 (Item #: 156164, Ref: CAR107625) $45.30

Wheel Half Shaft Seal, MFWD - Used on ZF APL325 Mechanical Four Wheel Drive front ends, this seal measures 1.388 inches inside diameter, 2.055 inches outside diameter and is 0.588 inches wide. Replaces OEM numbers 81411C2, 83956841, 83961163, AL63351, AL68702, ZP07050110133. Ford / New Holland models: 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7910, 8210 (Item #: 124717, Ref: AL63351) $21.80

Wheel Hub Trunnion Pin - Also known as a King Pin, this Wheel Hub Trunnion Pin is used on ZF APL325 Mechanical Four Wheel Drive front ends. This part replaces L40036, ZP4472351239, 81428C1, 83946561, E1NN3B626AA. Verify your axle before ordering. Some of the models listed used more than one 4 wheel drive front end. Used on Ford / New Holland 5110, 5610, 5900, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7910, 8210 (Item #: 124687, Ref: E1NN3B626AA) $77.00

Universal Parts and Accessories
Category: Steering

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Item #: 185079, Ref: WSV125A) $128.00

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.20

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.70

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $15.10

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $9.10

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $8.70

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 6810 Parts] [All Ford Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy