FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ferguson 20 Parts

Category: Steering

[Categories] [All 20 Parts] [All Ferguson Models]

Axle Bushing, Flanged - Front pivot support bushing with swept back axle. 2.075 inch outside diameter, 1.750 inch, .820 inches long. For tractor models TE20, TO20, TO30, TO35, MF35, MF135, MF235, 20, 2135. Length of bearing may vary but will fit application if over .790 inches. (Item #: 114715, Ref: 182850M1) $5.80

Axle Pin Bushing - Long variation of 182850M1. For the same application but length is 1.482 inches. For: TE20, TO20, TO30, TO35, MF35, MF135, MF235 industrial: 20, 2135. 2.075 inch outside diameter, 1.750 inch, 1.482 inches long. (Item #: 184791, Ref: 182850M1-L) $6.70

Axle Support, Front - Pin 1-3/4 inch x 9-3/4 inch. For models 2135 Industrial, TO35 with gas engine, 135 with serial number before 9A86903, 135 UK with serial number before 140129, 20 with serial number before 9A86902, 35 and FE35X. (Item #: 165186, Ref: 888347M2) $449.00

Axle, Swept Front with Bushing - For Massey Ferguson: Industrial 20, 2135, FE35, TE20, TEA20, TEF20, TO20, TO30 TO35, 135, 230, 235, 35. Swept Front Axle with Bushing. (Item #: 173497, Ref: 183219M91) $165.00

Front Axle Pin - Solid Center - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 20, 35, 35X, 135, 135 (s/n 9A86902-earlier), 148 (s/n 604669-earlier), 2135, Replaces Massey Ferguson OEM number 183221M1, 193746M1, Diameter: 1.75", Length: 5.50", (Item #: 155652) $28.20

Gasket, Steering Box Mounting - For tractor models F40, FE35, TO35, 1080, 1085, 135, 150, 165, 165 UK, 175, 175 UK, 178, 180, 20, 20C, 2135, 230, 231, 235, 245, 255, 261, 265, 282, 285, 30, 30B, 31, 40B, 50A, 50C, 50D, 35, 35 UK, 40, 50, MH50. Replaces 520307M1, 5230307M1, 180511M1, 180511M2, 180511M92 (Item #: 168134, Ref: 180511M2) $4.30

Jam Nut, Left Hand Thread - Used with 193733M91, this Jam Nut has .687 inch diameter 18 left hand thread. The hex diameter is 1-1/16 inches. Used on Massey Ferguson 20 Turf, 2135 Turf, TO35, 135 Deluxe / Special, 230 below serial number 9A349239 with Swept Back Axle, 235 with standard Swept Back Axle, 35. Some of these models may have clamping type tie rod tubes, where this nut is not used. Replaces Massey Ferguson part number 193068M1 (Item #: 105111, Ref: 193068M1) $11.10

Jam Nut, Right Hand Thread - Used with 180507M91 or 180381M91, this Jam Nut has .687 inch diameter 18 right hand thread. The hex diameter is 1-1/16 inches. Used on Massey Ferguson 20 Turf, 2135 Turf, TO35, 135 Deluxe / Special, 230 below serial number 9A349239 with Swept Back Axle, 235 with standard Swept Back Axle, 35. Some of these models may have clamping type tie rod tubes, where this nut is not used. Replaces Massey Ferguson part number 193067M1 (Item #: 105112, Ref: 193067M1) $9.20

Pivot Pin - Pivot Pin for swept back axles. VERIFY MEASUREMENTS. 1-3/4 inch outside diameter, 5 1/2 inches long, 1 inch bolt hole (which adequately replaces a 7/8) and 1 inch diameter crank hole. Will fit shorter applications. Fits TO20, TO30, TO35, 35, 135 prior to serial number 9A86902; Industrials: 20 prior to serial number 9A86902; 2135 Turf and narrow. Use bolt part number 181953M1 Replaces 193746M1. (Item #: 128512, Ref: 183221M1) $34.60

Pivot Pin Retaining Bolt - This Pivot Pin Retaining Bolt is used with 193746M1 Axle Pivot Pin. It has a 15/16 inch shoulder diameter. Thread size�5/8 inch X 1 7/8 inch NF. Replaces 181953M1, 181953M2. (Item #: 154781, Ref: 181953M2) $6.10

Power Steering Cylinder Kit - Includes: cylinder housing, piston, plate, adapter, rack, pin power steering rack, nut 1/2-20 toplock, snap ring and rod. For the following tractors: 135, 20, 2135, 35, 35 Turf, 35 Utility, TO35. Requires, but does not include a seal kit OEM number 835682M91. We do not have the seal kit available. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Item #: 165267, Ref: 1041940M91) $577.00

Power Steering Cylinder Rack - For 35, TO35, 135, 2135, 20. Power Steering Cylinder Rack, new style. To add to order enter in comment section. must be used with "new style" shaft Rack and Pin Set Available as part number 1751665M1KIT (Item #: 155114, Ref: 1751665M1) $158.00

Power Steering Gear Bearing and Races - These Bearing and Races are used on the Steering Worm Shaft on power steering models; TO35, 20, 135, 2135. Replaces 1751676M1 (Item #: 170142, Ref: LA33586A) $48.70

Power Steering Piston Rod Seal - This power steering piston rod seal has a .625 inch Inside Diameter, a 1.128 inch Outside Diameter and is .25 inch wide. It Fits: 135, 2135, 35, FE35, MF20 Industrial, TO35. Replaces: 1751701M1 (Item #: 178140, Ref: A26778) $8.50

Power Steering Pump Filter - Measures 1.02 inches inside diameter, 2.99 inches outside diameter, 1.61 inches height. For tractor models 11, Pony, 16, Pacer, 175, 180, 20, 202, 204, 2135, 2155, 2200, 230, 235, 245, 30, 302, 303, 304, 30B, 30D, 3165, 333, 35, 4500, 50, 50D, 555, 555D, 55D, 55G, 55K, 55LP, 65, 85, 88, Colt, FE35, FE35X, 50, Mustang, Pacemaker, TO30. VERIFY MEASUREMENTS of old filter. Replaces 1008553M1, 1052262M91, EP3, P183. (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Valve Assembly - For tractor models TO35, 35, 135, Industrials 20, 35, (2135 Turf). Replaces 1755047M91. (Item #: 182808, Ref: 1018735M92) $748.00

Seal, Power Steering Pump Driveshaft - For tractor models 135, 20, 200, 20C, 20D, 20E, 2135, 2200, 230, 235, 240, 245, 250, 2500, 30B, 30D, 30E, 35, 40, 4500, 50, MH50, 65, TO30. Verify measurements of 1.002 inches outside diameter, .437 inches inside diameter and .375 inches in width. (Item #: 173648, Ref: 1751651M1) $6.40

Spindle Bushing - Spindle Bushing for tractor models 135, 148, 20, 20C, 2135, 230, 235, 240, 250, 35, FE135, FE35, TE20, TO20, TO30, TO35. Bushing Measures 1.395 inches outside diameter X 1.265 inches inside diameter X 1.5 inches long. (Item #: 102473, Ref: 180345M1) $2.80

Spindle Repair Kit - (4) 180345M1 bushings, (2) 18560X thrust bearings, (2) 180355M1 spindle dust seals. For tractor models FE35, TEA20, TED20, TEF20, TE20, TO20, TO30, TO35, 135, 20, 2135, 230, 235, 240, 240S, 35. (Item #: 104970, Ref: SBBSKIT01) $29.30

Spindle Thrust Bearing - This Spindle Thrust Bearing measures 1.250 inch inside diameter, 2-3/16 inch outside diameter, 5/8 inches deep. Replaces 195175M1. For tractor models 20, 2135, F40, FE35, MF135, MF150, MF165, MF230, MF235, MF245, MF35, MF50, MF65, TE20, TO20, TO30, TO35. (Item #: 102478, Ref: 18560X) $7.10

Steering Box Assembly - Steering Box Assembly, for manual steering tractors. Length 17 inches. uses 1691798M1 steering wheel. Used on 231, 240, 250, 20D, 30E, 40E (Will also work on; 35, 50, 20, 135, 2135, 235, 202, 203, 204, 205 by ordering two 827690M1 'cup and lock ring sets' and 1691798M1 Steering Wheel.) Replaces 1673663M1, 1673663M91. Does not come with Mounting Gasket or Shifter Cups. (Item #: 161571, Ref: 1673663M1) $539.00

Steering Shaft Bearing Assembly - For Steering Column (without Power Steering). Tractors: TE20, TEA20, TO35, 35, 135, 20, 2135. Replaces original part number 180528M91. (Item #: 124501, Ref: 8N3517) $25.60

Steering Shaft Seal - 49/64 inch X 1 3/8 inch X 25/64 inch. For tractor models 135, 20, 202, 203, 204, 205, 2135, 230, 235, 245, 35, TO35. Replaces 1876951M1. (Item #: 172323, Ref: 1751702M1) $8.70

Steering Wheel Nut, Chrome - Chrome, Domed. For tractor models TE20, TEA20, TEF20, TO20, TO30, TO35, FE35, F40, 20, 202, 203, 204, 205, 50E, Pony, Super 90, 135, 135 UK, 270, 283, 290, 298, 35. Repalces OEM 195592M1. Head uses a 1 1/8 inch wrench. (Item #: 150988, Ref: 351103CC) $8.10

Tie Rod Assembly - Drag Link Assembly. For the following tractors: 135 DELUXE/SPECIAL, 20 TURF, 2135 TURF, 230 SWEPT AXLE with serial number to 9A349239, 235 STANDARD SWEPT AXLE, 35, TO35. Includes Ties Rod Ends 193733M91 and 180507M91 and Tie Rod. Length, overall 39.5 inches end to end. (Item #: 105107, Ref: 180780M92) $65.00

Tie Rod End, LH Thread - 3.312 inches in length, .687 inch diameter 18 left hand thread. For tractor models 135, 20, 2135, 230 swept axle serial number <-9A349239, 235 swept axle, 35, TO35. If you have a Jam Nut style tube (as opposed to clamping style), and need to replace the nut, it is available separately as part number 193068M1. Replaces 180391M91, 193733M91, 193733V91, 194607M91. (Item #: 105108, Ref: 193733M91) $15.90

Tie Rod End, RH Thread - 3.60 inches in length, .687 inch diameter 18 right hand thread. For tractor models 135, 20, 2135, 230 swept axle serial number <-9A349239, 235 swept axle, 35, TO35. (Item #: 105109, Ref: 180507M91) $20.60

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 1008553M1, 1052262M91 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.20

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.70

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $15.10

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $9.10

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $7.70

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $8.70

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 20 Parts] [All Ferguson Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy