Welcome! Please use the navigational links to explore our website.

FREE SHIPPING on orders above $249.99!   Details

PartsASAP Logo Company Logo
(800) 853-2651
Shopping Cart Icon
 

• Tractor Parts
• Engine Kits
• Carburetors
• Salvage
• Manuals
• DVDs
• Hats


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ferguson TO-30 Parts

Category: Steering

[Categories]   [All TO30 Parts]   [All Ferguson Models]  


Ferguson TO30 Axle Bushing
Axle Bushing
- Front pivot support bushing. For tractors: TE20, TO20, TO30, TO35. 1-15/16 inch outside diameter, 1-25/32 inch inside diameter, 1-1/2 inches long. Replaces 180344M1 (Item #: 110832, Ref: 2N3039) $8.30

Ferguson TO30 Axle Bushing, Flanged
Axle Bushing, Flanged
- Front pivot support bushing with swept back axle. 2.075 inch outside diameter, 1.750 inch, .820 inches long. For tractor models TE20, TO20, TO30, TO35, MF35, MF135, MF235, 20, 2135. Length of bearing may vary but will fit application if over .790 inches. (Item #: 114715, Ref: 182850M1) $7.20

Ferguson TO30 Axle Pin Bushing
Axle Pin Bushing
- Long variation of 182850M1. For the same application but length is 1.482 inches. For: TE20, TO20, TO30, TO35, MF35, MF135, MF235 industrial: 20, 2135. 2.075 inch outside diameter, 1.750 inch, 1.482 inches long. (Item #: 184791, Ref: 182850M1-L) $6.70

Ferguson TO30 Axle Support, Front
Axle Support, Front
- Pin 1-3/4 inch x 9-3/4 inch. For models 2135 Industrial, TO35 with gas engine, 135 with serial number before 9A86903, 135 UK with serial number before 140129, 20 with serial number before 9A86902, 35 and FE35X. (Item #: 165186, Ref: 888347M2) $449.00

Ferguson TO30 Axle, Swept Front with Bushing
Axle, Swept Front with Bushing
- For Massey Ferguson: Industrial 20, 2135, FE35, TE20, TEA20, TEF20, TO20, TO30 TO35, 135, 230, 235, 35. Swept Front Axle with Bushing. (Item #: 173497, Ref: 183219M91) $169.00

Ferguson TO30 Drag Link Dust Cover
Drag Link Dust Cover
- Rear Tie Rod Boot with leather insert. Fits tractor models TEA20, TO20, TO30, TO35, MF35. Replaces: TO3324. (Item #: 178150, Ref: 9N3324OE) $16.00

Ferguson TO30 Front Axle Pin
Front Axle Pin
- For TO20, TE20, TEA20, TO30. Front Axle Pin. 1 3/4 inches in diameter 4 1/4 inches in length. The bolt hole is 9/16 inches and the center hole is 1 5/16 inches. (Item #: 182845, Ref: 825002M1) $35.30

Ferguson TO30 Front Axle Pin - Solid Center
Front Axle Pin - Solid Center
- For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 20, 35, 35X, 135, 135 (s/n 9A86902-earlier), 148 (s/n 604669-earlier), 2135, Replaces Massey Ferguson OEM number 183221M1, 193746M1, Diameter: 1.75", Length: 5.50", (Item #: 155652) $30.00

Ferguson TO30 Pivot Pin
Pivot Pin
- Pivot Pin for swept back axles. VERIFY MEASUREMENTS. 1-3/4 inch outside diameter, 5 1/2 inches long, 1 inch bolt hole (which adequately replaces a 7/8) and 1 inch diameter crank hole. Will fit shorter applications. Fits TO20, TO30, TO35, 35, 135 prior to serial number 9A86902; Industrials: 20 prior to serial number 9A86902; 2135 Turf and narrow. Use bolt part number 181953M1 Replaces 193746M1. (Item #: 128512, Ref: 183221M1) $34.60

Ferguson TO30 Pivot Pin Retaining Bolt
Pivot Pin Retaining Bolt
- This Pivot Pin Retaining Bolt is used with 193746M1 Axle Pivot Pin. It has a 15/16 inch shoulder diameter. Thread size 5/8 inch X 1 7/8 inch NF. Replaces 181953M1, 181953M2. (Item #: 154781, Ref: 181953M2) $6.10

Ferguson TO30 Power Steering Pump Filter
Power Steering Pump Filter
- Measures 1.02 inches inside diameter, 2.99 inches outside diameter, 1.61 inches height. For tractor models 11, Pony, 16, Pacer, 175, 180, 20, 202, 204, 2135, 2155, 2200, 230, 235, 245, 30, 302, 303, 304, 30B, 30D, 3165, 333, 35, 4500, 50, 50D, 555, 555D, 55D, 55G, 55K, 55LP, 65, 85, 88, Colt, FE35, FE35X, 50, Mustang, Pacemaker, TO30. VERIFY MEASUREMENTS of old filter. Replaces 1008553M1, 1052262M91, EP3, P183. (Item #: 111126, Ref: AE33538A) $13.20

Ferguson TO30 Seal, Power Steering Pump Driveshaft
Seal, Power Steering Pump Driveshaft
- For tractor models 135, 20, 200, 20C, 20D, 20E, 2135, 2200, 230, 235, 240, 245, 250, 2500, 30B, 30D, 30E, 35, 40, 4500, 50, MH50, 65, TO30. Verify measurements of 1.002 inches outside diameter, .437 inches inside diameter and .375 inches in width. (Item #: 173648, Ref: 1751651M1) $6.40

Ferguson TO30 Spindle Bushing
Spindle Bushing
- Spindle Bushing for tractor models 135, 148, 20, 20C, 2135, 230, 235, 240, 250, 35, FE135, FE35, TE20, TO20, TO30, TO35. Bushing Measures 1.395 inches outside diameter X 1.265 inches inside diameter X 1.5 inches long. (Item #: 102473, Ref: 180345M1) $2.80

Ferguson TO30 Spindle Nut
Spindle Nut
- Castle Nut is 3/4 inch x 16 UNF. Replaces 353928X1, 376451X1. (Item #: 156038, Ref: 387930S36) $1.10

Ferguson TO30 Spindle Repair Kit
Spindle Repair Kit
- (4) 180345M1 bushings, (2) 18560X thrust bearings, (2) 180355M1 spindle dust seals. For tractor models FE35, TEA20, TED20, TEF20, TE20, TO20, TO30, TO35, 135, 20, 2135, 230, 235, 240, 240S, 35. (Item #: 104970, Ref: SBBSKIT01) $28.50

Ferguson TO30 Spindle Thrust Bearing
Spindle Thrust Bearing
- This Spindle Thrust Bearing measures 1.250 inch inside diameter, 2-3/16 inch outside diameter, 5/8 inches deep. Replaces 195175M1. For tractor models 20, 2135, F40, FE35, MF135, MF150, MF165, MF230, MF235, MF245, MF35, MF50, MF65, TE20, TO20, TO30, TO35. (Item #: 102478, Ref: 18560X) $7.40

Ferguson TO30 Spindle, LH
Spindle, LH
- This spindle measures A=11 inch, B=1 1/4 inch, C=3/4 inch UNF. For tractor models TE20 serial number 49999 and up, 35, FE35, TEA20, TED20, TEF20, FE35, to serial number 368615, TO20, TO30, TO35. Also replaces OEM number 897415M91. The wheel bearing kit used for this spindle is part number WBKMF1. (Item #: 102472, Ref: 180349M92) $55.00

Ferguson TO30 Spindle, RH
Spindle, RH
- This spindle measures A=11 inch, B=1 1/4 inch, C=3/4 inch UNF. Fits tractor models TE20 serial number 49999 and above. 35, FE35, TEA20, TED20, TEF20, TO20, TO30, TO35, MF35. Also replaces OEM number 897414M91. The wheel bearing kit used for this spindle is part number WBKMF1. (Item #: 102471, Ref: 180346M92) $59.00

Ferguson TO30 Steering Column Cover
Steering Column Cover
- Chrome cover includes spring and felt seal. Fits TE20, TEA20, TEF20, TO20, TO30. (Item #: 178011, Ref: 890576M1) $17.50

Ferguson TO30 Steering Gear Inner Bushing
Steering Gear Inner Bushing
- For tractor models TEA20, TE20, TO20, TO30. Verify measurements of 1 1/8 inches inside diameter, 1 7/16 inches outside diameter, 1 1/8 inches in length. (Item #: 173163, Ref: 195783M1) $25.20

Ferguson TO30 Steering Gear Outer Bushing
Steering Gear Outer Bushing
- For tractor models TEA20, TE20, TO20, TO30. Verify measurements of 1 5/16 x 1 7/16 x 1 13/64 inches. (Item #: 173164, Ref: 180363M1) $27.60

Ferguson TO30 Steering Shaft Bearing
Steering Shaft Bearing
- Replaces 760906M1. Price is for 1. Two are used on the steering shaft, one at the top and one at the bottom. For tractor models TE20, TO20, TO30. (Item #: 111285, Ref: 5BC-TIM) $14.60

Ferguson TO30 Steering Shaft Bearing Cone
Steering Shaft Bearing Cone
- Upper or Lower Steering Shaft Bearing Cone. Fits TE20, TO20, TO30. Two used per tractor. Price is for each. (Item #: 111625, Ref: 4CB-TIM) $24.60

Ferguson TO30 Steering Shaft Bearing Cup
Steering Shaft Bearing Cup
- Price is for 1. Two are used on the steering shaft, one at the top and one at the bottom. For TE20, TO20, TO30. Replaces 760907M1. (Item #: 111635, Ref: 6-TIM) $11.10

Ferguson TO30 Steering Shaft Bearing Inner Cone
Steering Shaft Bearing Inner Cone
- Bearing inner cone. One used for tractor models TE20, TO20, TO30. Part not in these models parts manual.832397M1 (Item #: 111625, Ref: 4CB-TIM) $24.60

Ferguson TO30 Steering Shaft and Gear
Steering Shaft and Gear
- Shaft, steering gear: TE20, TO20, TO30. 13 1/2 inches long. NOTE: If the bearings for this shaft are needed please order part numbers: 5BC-TIM (Bearing), 6-TIM (Outer Race), 4CB-TIM (Inner Race). Order times two (X2) for a complete bearing set (Upper and Lower) for one tractor. Replaces 181365M1 (Item #: 108524, Ref: 9N3525) $89.00

Ferguson TO30 Steering Wheel
Steering Wheel
- For TO20, TO30, TO35, 35, 135, F40, 50, and 65. 17-3/4 inch diameter, 3/4 inch hub with 3/16 inch keyway. Covered Metal Spokes. (41486S) (Item #: 122474, Ref: 180576M1) $25.00

Ferguson TO30 Steering Wheel - Original Type
Steering Wheel - Original Type
- For tractor models TE20, TEA20, TO20, TO30, TO35, 20, 35, 135, 50, 65, 2135. 17-3/4 inch diameter, 3/4 inch hub with 11/16 inch keyway. Metal Spokes. (Item #: 101418, Ref: 180576M1-OE) $28.00

Ferguson TO30 Steering Wheel Nut
Steering Wheel Nut
- Zinc Plated Steel Nut, Steering Wheel Acorn Style. 5/8 - 18 NF thread. 1.132 inches tall. 1 inch wrench size. Replaces 207562, 70207562, 913133, 351103-S, 351103S, 751454R1, AL2315T, 195592M1 (Item #: 183746, Ref: 351103S) $9.00

Ferguson TO30 Steering Wheel Nut, Black
Steering Wheel Nut, Black
- Black, Domed. For tractor models TE20, TEA20, TEF20, TO20, TO30, TO35, FE35, F40. Repalces OEM 195592M1. (Item #: 351103CCBlack) $7.86

Ferguson TO30 Steering Wheel Nut, Chrome
Steering Wheel Nut, Chrome
- Chrome, Domed. For tractor models TE20, TEA20, TEF20, TO20, TO30, TO35, FE35, F40, 20, 202, 203, 204, 205, 50E, Pony, Super 90, 135, 135 UK, 270, 283, 290, 298, 35. Repalces OEM 195592M1. Head uses a 1 1/8 inch wrench. (Item #: 150988, Ref: 351103CC) $8.00

Ferguson TO30 Steering Wheel Washer
Steering Wheel Washer
- This steering wheel washer is 1.497 inch outside diameter, 0.645 inch inside diameter and is 0.180 inches thick. It is used on F40, TE20, TO20, TO30, TO35, 135, 35, 50, 65, 85, 88, 202, 204, 2135. Replaces 180577M1, 180577V1, TO3673. (Item #: 179684, Ref: 180577M1) $4.40

Ferguson TO30 Tie Rod End
Tie Rod End
- 3.594 inches long, .687 inch diameter, 18 left hand thread. For tractor models 135 early, 30, 350, TEA20, TED20, TEF20, TO20, TO30. (Item #: 102497, Ref: 180391M91) $13.60

Ferguson TO30 Tie Rod End
Tie Rod End
- Replaces OEM number 194606M91. 3.250 inches long, .687 inch diameter, 18 right hand thread. For tractor models 135 early, 30, 35, TEA20, TEF20, TED20, TO20, TO30. Has Zerk Fitting and Castle Nut. Replaces 180381M91, 180507M91, 1862029M91, 194606M91. (Item #: 105035, Ref: 180381M91) $8.80

Ferguson TO30 Wheel Hub
Wheel Hub
- Front Wheel Hub. Six bolt. For the following tractors: 35, 50, 65, MH50, TE20 (serial number to 49998 and 52497-52565), TO30, TO35. Replaces 180338M91, 898085M91. (Item #: 133657, Ref: 180338M92) $48.00



Ferguson TO30 Eaton Power Steering Pump Replacement
Eaton Power Steering Pump Replacement
- This Power Steering Pump replaces the Eaton style belt driven Power steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $390.00

Ferguson TO30 Filter, Power Steering
Filter, Power Steering
- Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 1008553M1, 1052262M91 (Item #: 111126, Ref: AE33538A) $13.20

Ferguson TO30 Power Steering Pump Pulley
Power Steering Pump Pulley
- This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $46.90

Ferguson TO30 Steering Wheel Spinner, Bare Aluminum
Steering Wheel Spinner, Bare Aluminum
- Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.20

Ferguson TO30 Steering Wheel Spinner, Blue
Steering Wheel Spinner, Blue
- Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.70

Ferguson TO30 Steering Wheel Spinner, Green
Steering Wheel Spinner, Green
- Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.50

Ferguson TO30 Steering Wheel Spinner, Orange
Steering Wheel Spinner, Orange
- Comes with mounting hardware. (Item #: 108660, Ref: R6323) $15.10

Ferguson TO30 Steering Wheel Spinner, Red
Steering Wheel Spinner, Red
- Comes with mounting hardware. (Item #: 108663, Ref: R3277) $9.10

Ferguson TO30 Steering Wheel Spinner, Yellow
Steering Wheel Spinner, Yellow
- Comes with mounting hardware. (Item #: 108665, Ref: R3280) $7.80

Ferguson TO30 Tie Rod Boot Assortment
Tie Rod Boot Assortment
- Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $12.60

No
Picture
Wheel Spinner- Black
- Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $8.70

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories]   [All TO30 Parts]   [All Ferguson Models]  







PayPal


Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2024 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy