FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ferguson FE-35 Parts

Category: Gauges

[Categories] [All FE35 Parts] [All Ferguson Models]

Ammeter - 1-5/8 inch diameter. Must use grommet 897074M1 if you are mounting this gauge in a 2 inch hole. The Grommet is available for Separately. For tractor models TEF20, FE35. Replaces 827055M1, 2757182, 36047, 36047F, 36351, M10-01-01 (Item #: 182621, Ref: 36047F) $19.00

Ammeter Grommet - The Grommet is used with 36047F Ammeter when mounting it into a 2 inch hole. (Item #: 180206, Ref: 897074M1) $3.40

Gauges - For tractor models FE35. Tachometer with KPH Reading. (Item #: 178259, Ref: 1850092M93) $53.00

Oil Pressure Gauge - For tractor models FE35, TEA20, 135, 148, 165, 168, 175, 178, 185, 188, 35, 65, 765, TO35 with STD. DIESEL ENGINES. (Item #: 104108, Ref: 1853097M91) $21.80

Tachometer Cable - Tachometer cable assembly, 53 inches, threaded ends are 5/8-18 x 7/8-18 one Keyed and one Square end. For tractor models MF85 diesel, MF88 diesel, MF255 early production with A4-326 diesel, MF265 diesel to serial number 9A349238, MF275, MF285 to serial number 9A349238. Industrials: 50C, 320 Skidder, Ferguson TO35 with 23C 4 Cylinder Diesel and FE35 with 23 Diesel up to serial number 829487M91. Replaces 544198M91, 829487M91, 532430M91, 882021M91 (Item #: 173960, Ref: 544198M91) $20.40

No
Picture
Tachometer Cable - Tachometer Cable Assembly, 54 inches long, 1/2 inch UNF drive end, and 5/8 inch UNF load end. For tractors: FE35, 35X, MF270, MF282, MF290L, 1080, 165, 168, 175, 178, 180, 185, 188, 271, 275, 283, 281 and Industrial: 30D, 50E. Replaces 876289M92, 827855M1, 1876289M93 and 960941M1. (Item #: 104135, Ref: 882021M91) $11.60

Tachometer Cable - 23 inches long, 7/8 inch drive end, 5/8 inch load end. Verify length. Replaces 1853233V1, 827855M1, 827855V1, 828033M92, 882539M91, 882539V91, 890232M91, 890460M91. (Item #: 104132, Ref: 41092S) $14.64

Tractormeter (Tachometer) - For TO35, FE35, 87mm, 23C up to serial number 307657. Replaces OEM part number 1850093M93 (41069S). Drive Cable, 48 inches long available as part number 829487M91 (41091S). REPLACEMENT - NOT LIKE ORIGINAL AND MAY NEED BOLT EXTENSIONS FOR MOUNTING DEPENDING ON APPLICATION. (Item #: 173082, Ref: 1850093M93) $47.61

Tractormeter Drive Assembly, with Gasket - For tractor models TO35, FE35 with Standard Motors 23C Diesel Engine. 1/2" UNF Drive End. (Item #: 162021, Ref: 829489M91) $29.30

Water Temperature Gauge - This temperature gauge has a 72 inch Capillary tube, 2 inch Face Diameter, Chrome Ring. 180 degree normal temperature setting, 220 degree pegs top end. 5/8 inch UNF connector. TO20, TO30, TO35, FE35, F40, MH44, 50, 333, 444, 555, MF35, 50, 65, 85, 88, Super 90, 135, 165, 175, 178; ind. 20, 30, 31, 40, 50A, 70, 80, 202 Work Bull, 2200, 3165. Replaces: 1078125M91, 1079390M91, 180727M91, 180727M93, 182652M92, 1850512M94, 881396M91, 899455M91, 108727M93, 1078125M91, 0236708, 1078125M91, 180727M91, 180727M92, 180727M93, 881369M91, 899455M91 (Item #: 104116, Ref: 180727M91) $24.60

Universal Parts and Accessories
Category: Gauges

Ammeter Gauge - 60-0-60, 12 volt, 2 inch body diameter. (Item #: 182559, Ref: AMG60) $15.70

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $63.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $42.30

Oil Gauge Copper Line Kit - Universal, for tractors using 1/8 inch x 6 foot copper oil line. Includes 6 foot 1/8 inch line, 2 inch x 5/16 inch -24 UNF nuts, 2 compression sleeves, and a 1/8 inch-27 NPTF female to 5/16 inch-24 UNF male adapter. (Item #: 121625, Ref: UNI523) $32.14

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/4 inch tube. Brass. (Item #: 178134, Ref: IHS626) $16.00

Oil Pressure Gauge - Universal Complete assembly with oil tube and mounting hardware. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Item #: 101927, Ref: SSW0002) $18.00

Temperature Gauge - Universal water temperature gauge (0-280 degree scale). Fits tractor model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1/2 inch or 3/4 inch male adapter, engine block or radiator threaded hole. (Item #: 186993, Ref: 1042944) $26.90

Temperature Gauge, Universal - For 2 inch mounting hole. Complete assembly with bracket and adapters for block. Fitting for lead is 3/8 inch NPT and 1/2 inch NPT adapter. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77 inch capillary line. Fits all liquid cooled engines. (Item #: 178102, Ref: UTG50) $21.50

Temperature Gauge, Universal - Heat Indicator for 2 inch mounting hole. Complete assembly with bracket and adaptors. Numeric Face. 70 inch metal wrapped capillary line installs in block, head or hose. Dial calibrated to 250 degrees. Fits all liquid cooled engines. (Item #: 178124, Ref: UTG25) $23.60

Three Gauge Cluster - This universal set includes a Temperature Gauge, Amp Gauge and Oil Pressure Gauge in a chrome bezel. Gauges can be rotated in the bezel to mount a various angles. -60 to 60 Ammeter, 0 to 80 Oil Pressure, 100 to 220 Water Temperature (Item #: 134029) $41.60

Voltmeter, 12 Volt, Lighted Dial - Voltmeter-Gauge has 8 volt to 16 volt range, lighted dial, fits 2 inch diameter hole. For tractors that use 12 volt electrical system. Chrome bezel with black background, white letters and white pointer. (Item #: 178013, Ref: VOLT12LT) $37.20

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Gauges

[Categories] [All FE35 Parts] [All Ferguson Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy