FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 1456 Parts

Category: Steering

[Categories] [All 1456 Parts] [All Farmall Models]

Axle Pivot Ball - Thread is 3/4 inch diameter, 16 thread. Ball is 1.75 inches in diameter. For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1566, 1586, 544, 560, 656, 666, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, Hydro 70, (66 series with block type power steering cylinder end (late with axle pivot ball, NOT pin), (86, 88 series with axle pivot ball NOT pin). (Item #: 108885, Ref: 65320C3) $21.60

Bull Gear, Used - For International tractor models 1086, 1456, 1466, 1468, 1486, 3788, 4386, 4568, 4586, 6788, 21456, Replaces International OEM nos 528712R1, Width: 3 1/2", Teeth: 73, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499144) $580.01

Bull Pinion Shaft - For International / Farmall tractor models 1456, 1466, 1468, 4568, 4586, Replaces International OEM number 528709R2, 14 / 13 / 12 Spline, 13.79" Long, For tractors without diff. lock, (Item #: 112500) $622.02

Jam Nut - For the following tractors: Hydro 100, Hydro 185, Hydro 70, 1026, 1066, 1086, 1206, 1256, 1466, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 460, 544, 560, 660, 666, 686, 706, 756, 766, 786, 806, 826, 856, 966, 986, 2WD STD AXLE: 5088, 5288, 5488. Replaces 374062R1 (Item #: 105123, Ref: 192928M1) $8.40

Rear Housing Overhaul Gasket Set - For International / Farmall tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388 (s/n 10490-earlier, Does not include Pump drive Housing Gasket), 3588 (s/n 130114-earlier, Does not include Pump Drive Housing Gasket), 3788 (s/n 9786-earlier, Does not include Pump Drive Housing Gasket), Replaces International OEM number 386683R96, (Item #: 168749) $195.00

No
Picture
Ring Gear and Pinion Kit - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 3088, 3288, 3388, 3488, 3588, 3688, 6388, 6588, Replaces International OEM number 135770C2, 528684R91, 528707R93, 395828R1, Kit Includes: Ring Gear and Pinion, Lock Plate, Nut, Shim (.004"), (2) Shims (.007"), and Bearing and Retainer Assembly, For Bearing and Retainer Kit use Item #: 160584, (Item #: 177076) $2249.01

Shim Stay Rod Cap - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 21026, 21256, 21456, Replaces International OEM number 379954R1, (Item #: 111253) $4.00

Spindle Bushing - Fits 1.667 inch diameter spindles replaces 376099R1. For use with A-71785HD and OEM spindle. (Item #: 102175, Ref: 358958R2) $9.70

Spindle Bushing Kit - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 186, 404, 424, 444, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 786, 806, 826, 856, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 358958R2, 185106C1, 15943DA, (4) 358958R2 Bushings: 1-43/64" x 1-7/8" x 2", (2) 185106C1 Thrust Bearings: 1-3/4" ID x 2-3/4" OD, (2) 15943DA Dust Seals: 2-3/8" x 3" x 1/4", For Bushing use Item #: 102176, (Item #: 104350) $58.00

No
Picture
Spindle Jam Nut - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2404, 2424, 2444, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 5088, 5288, 5488, 21026, 21206, 21256, 21456, Replaces International OEM number 427546, 1-3/8"-12, (Item #: 100852) $4.00

Spindle Kit - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 71785TM, Right or left hand, Taper mate system, Dimension A: 12.75", Dimension B: 1.667", Dimension C: 1.78", Dimension D: 1.375", Spline: 17, Includes spindle, nut, ring, and washer, (Item #: 100849) $246.00

No
Picture
Spindle Kit,Taper Mate - Right Hand/Left Hand - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 4156, 5088, 5288, 5488, Kit includes spindle, nut, ring and washer and steering arm, Fits left or right hand side, Dimension A: 12.75", Dimension B: 1.667", Dimension C: 1.78", Dimension D: 1.375", For wheel bearing kit use Item #: 100856, Additional Handling and Oversize Fees Apply To This Item, (Item #: 100850) $284.00

Spindle and Steering Arm Set Left or Right Hand - Splined Style - Spindle and Steering Arm set left or right hand. 12.750 keyed upright shaft measurements on inner bearing 1.780 inch, outer bearing 1.375 inch. Use R2945 wheel bearing kit. For tractor models 656, 666, 686, 756, 766, 786, 826, 856, 886, 896, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3688, 5088, 5288, 5488, Hydro 70, Hydro 86, Hydro 100, Hydro 186, Hydro 3488. (Item #: 184836, Ref: R2938) $507.00

$Farmall 1456 Spindle, RH\LH$
Spindle, RH/LH - This spindle measures A= 12.750 inch, B= 1.667 inch, C= 1.780 inch, D= 1.375 inch. For tractor models 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1566, 1568, 1586, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, Hydro 100, Hydro 186, Hydro 70, Hydro 86. The wheel bearing kit used for this spindle is part number FW120FS. Replaces 196334C2, 71785C92 (Item #: 100848, Ref: 71785C92) $150.00

$Farmall 1456 Spindle, Taper-lok - Right Hand\Left Hand$
Spindle, Taper-lok - Right Hand/Left Hand - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 71785SPO, Splines: 17, Left Hand or Right Hand Side, Shaft: 12.875", Shaft Diameter: 1.667", Large Race: 1.780", Small Race: 1.375", For wheel bearing kit use Item #: 100878, (Item #: 125215) $273.00

Stay Rod Cap - For tractor models 1026, 1206, 1256, 1456, 544, 560, 656, 666, 706, 756, 806, 856, Hydro 70. (Item #: 108884, Ref: 60763DB) $15.00

No
Picture
Stay Rod Cap Shim - For Hydro 70, 1026, 1206, 1256, 1456, 544, 560, 656, 666, 706, 756, 806, 856. (Item #: 111364, Ref: 60762D) $4.60

Stay Rod Cap, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3688, 21026, 21206, 21256, 21456, Replaces International OEM number 379953R1, 2 Bolt, For a new version of this item use Item #: 110265, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410265) $8.51

Stay Rod Socket - For tractor models 1026, 1206, 1256, 1456, 544, 560, 656, 666, 706, 756, 806, 826, 856, Hydro 70. (Item #: 108814, Ref: 535861R1) $28.70

Steering Arm - Left or right hand - keyed. For tractor models 544, 656, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456. (Item #: 100884, Ref: R2949) $113.00

No
Picture
Steering Arm - Left hand - 2 inch diameter splined. For tractor models 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456. (Item #: 100886, Ref: R0264) $148.00

Steering Arm - Right hand - 2 spline. For tractor models 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456. (Item #: 100885, Ref: R0265) $182.00

Steering Arm - Left - TAPER-LOK Spindle - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 531248TM, Left Hand Arm, (Item #: 110714) $119.00

Steering Arm - Right - TAPER-LOK Spindle - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 531248TM, Right Hand Arm, (Item #: 110715) $99.00

Steering Arm - Right Hand and Left Hand, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 2544, 2706, 2826, 2856, 21026, 21206, 21256, Replaces International OEM number 383914R1, Left or Right Side, 1.667" diameter hole, .250" keyway, For a new version of this item use Item #: 100884, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400884) $65.01

Steering Arm - Undersized Left Side - For International / Farmall tractor models Hydro 100, Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3688, Replaces International OEM number 531248R2US86, 531248R2, Left hand side, Fits spindles with square shoulder below spline, Spline is .030" undersized, For Spindles with snap ring groove below spline use 100891, Steering Arm - Undersized - Right Side use Item #: 100892, (Item #: 100893) $62.00

$Farmall 1456 Steering Arm, Taper Mate Style - Right Hand\Left Hand$
Steering Arm, Taper Mate Style - Right Hand/Left Hand - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488 (Hydro), 3688, 5088, 5288, 5488, Replaces International OEM number 531249TM, 531248TM, Right or left side, For Taper-Mate Spindles only, (Item #: 100889) $73.00

Steering Arm, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488 (Hydro), 3688, 5088, 5288, 5488, Replaces International OEM number 531249R2, 531248R2, Right or Left side, For Taper-Mate Spindles only, For a new version of this item use Item #: 100889, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400889) $35.01

Steering Hand Pump Assembly, Used - For International tractor models 706, 806, 1256, 1456, 2706, 2806, 21256, 21456, Replaces International OEM nos 382579R92, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 438854) $360.01

Steering Shaft Cross and Bearing (U-Joint) - Tighten up your steering with a new Universal Joint. This part measures 2.305 inches across cap to cap, with a 0.968 inch cap diameter. Some models use more than one, sold individually. Some models used different sizes, verify measurements. Replaces OEM numbers 10P715, 1KAR758, 224890, 350254R91, 357439R91, 363313R91, 363321R91, 52977DAX, 70224890, 836514M91, 841193M92, A20435, A20684, A30408, A30425, A30428, A30435, VTA3227, Z862 (Item #: 115351, Ref: 70224890) $11.00

Steering Wheel - 16 inch diameter. Mounts on 13/16 inch (36 spline) shaft. For the following tractors WITH POWER STEERING : HYDRO 70, HYDRO 84, HYDRO 86, HYDRO 100, HYDRO 186, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 4386, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788. Replaces IHS542. Cap is available separately as part number 68837C3. (Item #: 101432, Ref: 385156R1) $45.00

Steering Wheel - Tilt type 36 spline, 7/8 inch shaft, 3 covered spokes. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. Uses cap 400220R1. (Item #: 122473, Ref: 400217R1) $94.00

Steering Wheel Boot - Rubber cover for Orbit Motor. For tractor models 544, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 4156, 4166, 4186, Hydro 70, Hydro 86, Hydro 100. Replaces IHS682. (Item #: 126655, Ref: 382587R1) $16.70

Steering Wheel Cap - For tractor models 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 1586, 186, 2400, 2500, 3088, 3220, 3230, 3288, 3388, 3588, 3688, 3788, 404, 424, 4386, 444, 454, 4586, 464, 4786, 484, 504, 5088, 5288, 544, 5488, 574, 584, 606, 6388, 656, 6588, 664, 666, 674, 6788, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, HYDRO 100, HYDRO 186, HYDRO 3488, HYDRO 70, HYDRO 84, HYDRO 86. (Item #: 108550, Ref: 68837C3) $8.80

Steering Wheel Cap - For Models with Power Steering. Has "IH" logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Item #: 101433, Ref: 366566R1) $55.00

Steering Wheel Cap - Use with steering wheel 400217R1. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. Gasket available as p/n 402434R1. (Item #: 124179, Ref: 400220R1) $106.00

Steering Wheel Cap Gasket - Use with steering wheel cap 400220R1. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. (Item #: 109446, Ref: 402434R1) $12.80

Steering Wheel Cap Mounting Plate - This Steering Wheel Cap Mounting Plate is for Tilt Steering on 1026, 1066, 1256, 1456, 1466, 1468, 1566, 1568, 706, 756, 766, 806, 826, 856, 966, Hydro 100. Replaces 400395R1. (Item #: 172978, Ref: 400395R1) $15.50

Steering Wheel Cap, Models without Power Steering - Has "IH" logo. For tractor models 140, 240, 300, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 656, 664, 666, 674, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 4100, 4166, 4186. (Item #: 101434, Ref: 366558R1) $64.00

Steering Wheel Cover, Tilt - Made of plastic. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. (Item #: 179248, Ref: 400213R1) $75.01

Steering Wheel Horn Button Spring - Used with 400220R1 steering wheel cap on 806, 1066, Hydro 100, 706, 756, 766, 826, 856, 966, 1026, 1256, 1456, 1466, 1468, 1566, 1568. The cap will not fit correctly without the spring. (Item #: 180150, Ref: 400396R1) $5.20

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $8.00

No
Picture
Steering Wheel Release Lever Knob - Use with 400214R21 release lever. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. (Item #: 180477, Ref: R5148) $15.20

No
Picture
Steering Wheel Release Lever, Tilt - For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100. (Item #: 179955, Ref: 400214R21) $16.70

No
Picture
Steering and Gear Selector Support, Used - For International tractor models 1456, 1566, 1568, 21456, Replaces International OEM nos 533306R91, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434241) $117.01

Taper Lock Snap Ring - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 71785, (Item #: 128038) $2.70

Taper Lock Washer - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 71785, (Item #: 128039) $4.00

Taper Lok Nut - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 71785, (Item #: 128037) $4.90

Taper-Lok Assembly Set of 2 - The two Taper-Lok spindles measure 12.875 inches shaft, 1.667 inches shaft diameter, 1.780 inches inner bearing, 1.375 inches outer bearing, and a Spline Count of 17. This is a set of TAPER-LOK Spindles, 1 left hand steering arm, 1 right had steering arm, snap rings, nuts, and washers. If wheel bearings are needed, order FW120FS, (Item #: 111392, Ref: 71785TLS) $565.00

Thrust Bearing - Fits Models: 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1586, 1822, 1844, 2022, 2044, 21026, 2400A, 2500A, 2656, 2706, 2756, 2826, 2856, 300, 3088, 3288, 350, 3688, 380B, 385, 395, 400, 450, 454, 484, 485, 495, 504, 5088, 5288, 544, 5488, 560, 574, 584, 585, 595, 595XL, 656, 66, 666, 674 with STRAIGHT AXLE. 1.755 inches inside diameter, 2.685 inches outside diameter, 0.694 inches wide. Replaces 185106C1, 185106C91, 357349R91, 361034R91, 369131R91, 387231R91, 405831R91, 527295R91, 844398R91 (Item #: 102174, Ref: 185106C1) $12.80

Tie Rod Assembly - Complete assembly contains the following items: 359984R93 Tie Rod- Outer, 359986R1 Clamp, 374062R1 Jam Nut, 383917R1 Tube, 384006R92 Tie Rod- Inner. Fits HYDRO 100, HYDRO 186, HYDRO 70, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1568, 1586, 460, 544, 560, 656, 660, 666, 706, 756, 766, 806, 826, 856, 966, 986. Fits Factory International wide front axles only. Will not fit Schwartz, Speeco, Norden or other aftermarket wide front axles. (Item #: 100869, Ref: 223313) $80.00

Tie Rod Clamp - For International / Farmall tractor models Hydro 70, Hydro 100, Hydro 186, 460, 544, 560, 656, 660, 666, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1568, 1586, Replaces International OEM number 359986R1, (Item #: 104414) $3.20

No
Picture
Tie Rod End, Inner - Left Hand - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 2706, 2756, 2806, 2826, 2856, 4100, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM number 384005R91, 3.75" Long, 1" Diameter, 16 Left Hand Thread, (Item #: 100873) $14.10

Tie Rod Jam Nut - For International / Farmall tractor models Hydro 70, Hydro 100, Hydro 186, 460, 544, 560, 656, 660, 666, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1568, 1586, Replaces International OEM number 374062R1, 1.000" - 16 RH thread, (Item #: 104411) $8.20

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.20

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.70

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $15.10

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $9.10

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $8.70

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 1456 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy