FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 444 Parts

Category: Clutch

[Categories] [All 444 Parts] [All Farmall Models]

Bearing, Release - This is an original style bearing with graphite material. It has a 3.13 inch outside diameter, 1.63 inch inside diameter, 4.09 inch outer to outer width, .56 inch pin diameter. Used on 2300, 2350, 276, 354, 364, 374, 384, 434, 444, B276, B434. Replaces part numbers 1099224R91, 705542R91, 72871, 46890. (Item #: 124561, Ref: 705542R91) $51.00

No
Picture
Clutch Alignment Tool - 1-1/8 inch 10 spline, 1-3/4 inch 10 spline, 13/16 inch pilot. For tractor models 384, 414, 424, 444, 2300, 2300A, 2424, 2444. (Item #: 122047, Ref: S.70922) $27.80

Clutch Assembly, Dual - Contains Pressure Plate number 1539022C1, clutch disc number 1539025C1, PTO disc number 1539020C1. (Item #: 172511, Ref: 628135609) $1199.01

No
Picture
Clutch Disc - This 11 inch diameter, organic, spring loaded clutch disc has 10 splines on a 1.125 inch hub. Replaces 3108790R91 and 3047748R93. This disc was used on models B250, B414, 276, 364, 384, 434, 444, 485, 575, 434. (Item #: 169844, Ref: 1539025C1) $282.00

No
Picture
Clutch Disc - For International / Farmall tractor models 354, 364, 374, 384, 424, 434, 444, 2300, 2300A, 2424, 2444, Replaces Case IH OEM number 390010, (Item #: 166096) $130.00

No
Picture
Clutch Disc - For International / Farmall tractor models 364, 384, 434, 444, 2350, Replaces International OEM number 3048529R91, Diameter: 11", Spline Count: 10, Spline Diameter: 1.125", Center: Spring Loaded, Type: Organic, (Item #: 173776) $117.00

Clutch Disc, Remanufactured, 392076R92 - For International / Farmall tractor models 424 (w/ Gas or Diesel Engine, s/n 10242 - earlier), 444 (All w/ Gas Engine), 2424 (s/n 2520 - earlier), 2444 (All w/ Gas Engine), 3444, Replaces International OEM number 392076R92, 392076HD6, Clutch Size: 11", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 6 Reg Pads, For Single Clutch, (Item #: 205994) $152.00

Clutch Disc, Remanufactured, 392076R92, H392076 - For International / Farmall tractor models 424 (w/ Gas or Diesel Engine, s/n 10242 - earlier), 444 (All w/ Gas Engine), 2424 (s/n 2520 - earlier), 2444 (All w/ Gas Engine), 3444, Replaces International OEM number 392076R92, H392076, Clutch Size: 11", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 4 Reg Pads, (Item #: 205995) $134.00

No
Picture
Clutch Flywheel Plate - For International / Farmall tractor models 424, 444, Compatible with International Construction and industrial models 2424, 2444, Replaces International OEM number 392498R1, (Item #: 173876) $91.00

Clutch Lever - Used In 390011R91 Dual Clutch Assembly. For tractor models 424, 444, 2424, 2444. (Item #: 173023, Ref: 392499R2) $15.40

No
Picture
Clutch PTO Disc 9 Inch - For double clutch, 10 spline on 1.75 inch hub, organic, rigid. For tractor models 2300, 3414, 3444, B414, 345, 354, 364, 374, 384, 424, 444. (Item #: 163114, Ref: 1539020C1) $52.00

Clutch Pressure Plate - Pressure Plate: 11 inch, with PTO disc, with 1.344 inch flywheel step (Auburn Design). For tractor models B414, 424, 434, 444, 2424, 2444. Replaces 399536R92. (Item #: 158382, Ref: 390011R92) $749.00

Clutch Shaft - For tractor models 2424, 2444, 384, 424, 444, B275, B414. Also replaces 751048R2. (Item #: 179948, Ref: 3071270R1) $20.10

Pressure Plate Assembly, 11 Inch - Pressure Plate: pressed steel, with release plate. 2350, 364, 384, 434, 444, 990 David Brown, 990B David Brown, 995 David Brown. Replaces 3048528R91, K86188. (Item #: 122808, Ref: K86188) $138.00

No
Picture
Pressure Plate, Remanufactured - For International / Farmall tractor models 424, 444, 2424, 2444, 3444, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206068) $105.00

Pressure Plate, Remanufactured, 392077R91 - For International / Farmall tractor models 424 (s/n 10242 - earlier), 444, 2424 (s/n 2520 - earlier), 2444, Replaces International OEM number 392077R91, Pressure Plate Size: 11", Pressure Plate Levers: 3, Pressure Plate Springs: 3, Pressure Plate Type: Single Stage, (Item #: 203732) $81.00

Release Bearing - Clutch release bearings, 3.500 inch outside diameter, 2.375 inch inside diameter, .730 inch wide bore. For tractor models 300, 330, 340, 350, 424, 444, 460 with standard clutch, 504, 606, 2424, 2444, 2504. For 1066, 140, 1466, 1468, 1566, 1568, 2400A, 2500A, 3088, 3288, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 454, 464, 5088, 5288, 5488, 574, 666, 674, 686, 766, 966, Cub, Cub Lo-Boy, HYDRO 100, HYDRO 70, HYDRO 86. (Item #: 107995, Ref: 59879D) $31.70

No
Picture
Transmission Clutch Disc - For International / Farmall tractor models 424, 444, Compatible with International Construction and industrial models 2424, 2444, 3414, 3444, Replaces International OEM number 399536R92, Diameter: 11", Splines: 10, Spline Diameter: 1.125", Center: Spring loaded, Type: Organic, (Item #: 173881) $178.00

Universal Parts and Accessories
Category: Clutch

Tractor Splitting Stand Heavy Duty - HEAVY DUTY - Tractor Splitter for servicing higher horse power tractors safely. Max supported weight 20, 000 per jack stand. Minimum Height: 19.6 inches (23.6 inches with extension). Maximum Height: 29.1 inches (33 inches with extension). Rail Length 156 inches, Width 23.6 inches. Safety locking bolts on each jack stand. CE Certified. This item ships truck freight. Please call to order. (Item #: 133346, Ref: 150442) $2039.01

Tractor Splitting Stand Kit with Rails - This Tractor Splitting Kit is constructed with two splitting jack stands which are manufactured with a set of metal wheels to ride on the steel rails. The kit is designed to assist with the process of splitting tractors effortlessly, efficiently, and safely while performing tractor repairs, maintenance, and inspections. Features: 118 inch slide rail for the movement of jacks stands, 2 jacks stands and support fixings, 1 support handle to assist the adjustment, 2 height extensions enabling the height to be increased by 4 inches, Gross Weight approximately 176 lbs., Maximum Supported weight 10, 000 lb. per jack stand, Minimum Height: 14.5 inches / 18.5 inches (with extension), Maximum Height: 23.75 inches / 27.75 inches (with extension). This item ships truck freight. Please call to order. (Item #: 165543, Ref: 119888) $1059.01

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Clutch

[Categories] [All 444 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy