FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 3488 Parts

Category: Steering

[Categories] [All 3488 Parts] [All Farmall Models]

Axle Clamp Bolt and Nut - For International / Farmall tractor models Hydro 100, Hydro 186, 766, 786, 856, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4366, 4386, 5088, 6388, 6588, 6788, 21456, Replaces International OEM number 539827R2, 539827R1, With Nut, 6.50" Long, 7/8" - 14 UNF, (Item #: 111420) $24.80

Axle Pivot Pin - For International / Farmall tractor models Hydro 186, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 120732C2, Rear Pin, 3.540" Long, 1.248" Diameter, (Item #: 110108) $60.00

Axle, Center - Pin style, uses 482669R1 bushing and 120732C2 pin. For tractor models (Hydro 186, 786, 886, 986, 1086, 1486, 1586 all with late serial number), 3088, 3488, 3688, 5088, 5288, 5488, 1822, 1844, 2022, 2044. (Item #: 172866, Ref: 120733C91) $1329.01

No
Picture
Complete Front Axle Overhaul Kit - For International / Farmall tractor models Hydro 100 (Late, with Axle Pivot Ball, Not PIN), 766 (Late, with Axle Pivot Ball, Not PIN), 786 (with Axle Pivot Ball, Not PIN), 886 (with Axle Pivot Ball, Not PIN), 966 (Late, with Axle Pivot Ball, Not PIN), 986 (with Axle Pivot Ball, Not PIN), 1066 (Late, with Axle Pivot Ball, Not PIN), 1086 (with Axle Pivot Ball, Not PIN), 1466 (Late, with Axle Pivot Ball, Not PIN), 1468 (Late, with Axle Pivot Ball, Not PIN), 1486 (with Axle Pivot Ball, Not PIN), 1566 (Late, with Axle Pivot Ball, Not PIN), 1568 (Late, with Axle Pivot Ball, Not PIN), 3088 (Early, with Round Tube Axle), 3288 (Early, with Round Tube Axle), 3488 (Early, with Round Tube Axle), 3688 (Early, with Round Tube Axle), 5088 (Early, with Round Tube Axle), 5288 (Early, with Round Tube Axle), 5488 (Early, with Round Tube Axle), Replaces International OEM number 50291006, Kit Contains: (1) Cylinder End, (2) Trunion, (2) Bushing, (2) Trunion Bolt, (2) Bushing, (1) Yoke Pin, (2) Inner Tie Rod, (2) Outer Tie Rod, (2) Axle Pivot Bushing, (1) Bolster Pin, (1) Ball Stud, (2) Thrust Bearing, (2) Felt Washer, (!) Retaining Pivot Pin/ 3 PKG, (Item #: 173392) $480.00

Differential Bevel Gear, Used - For International tractor models Hydro 100, Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4366, 4386, 4568, 4586, 4786, 6388, 6588, 6788, Replaces International OEM nos 380190R2, Teeth: 28, Splines: 14, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431512) $107.01

Front Axle Basic Overhaul Kit - This kit contains Contains: 2 trunnions (531237R1), 2 bushings (533283R1), 2 trunnion bolts (531238R1), 2 bushings (71788C1), 1 yoke pin (531239R1). It is used on the following tractors: Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088 (with round tube axle), 3288 (with round tube axle), 3388, 3488 (with round tube axle), 3688 (with round tube axle), 5088 (with round tube axle), 5288 (with round tube axle), 5488 (with round tube axle) (Item #: 112534) $100.00

Front Axle Knee - Used on axles that adjust from 58 to 82 inches in width, the diameter of the axle is 4.375 inches. It is used with spindles that are 12.750 inches vertical shaft with an 1.667 inch shaft diameter. This Axle Knee comes with bushings. Replaces 531260R92, 531260R93 (Item #: 109445, Ref: 531260R92) $291.01

No
Picture
Front Axle Pin Kit - This kit contains: 2 trunnions (531237R1), 2 bushings (533283R1), 2 trunnion bolts (531238R1) 5/8 inch x 16 UNF, 2 bushings (71788C1), 1 yoke pin (531239R1) length 7.44 inches, and an outside diameter measuring .997 of an inch. For the following models: 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3688, 5088, 5288, 5488, 766, 786, 886, 966, 986, Hydro 186. (Item #: 531239R1KIT) $91.43

Front Axle Trunnion - For International / Farmall tractor models Hydro 100, Hydro 186, 766, 886, 966, 986, 1066, 1086, 1468, 1486, 1566, 1568, 3488, 3688, 5088, Replaces International OEM number 531237R1, (Item #: 109440) $15.30

No
Picture
Front Axle Trunnion, Used - For International tractor models Hydro 100, Hydro 186, 766, 886, 966, 986, 1066, 1086, 1468, 1486, 1566, 1568, 3488, 3688, 5088, Replaces International OEM number 531237R1, Note - 66 SERIES (W/BLOCK TYPE PS CYL END (LATE 66 W/AXLE PIVOT BALL)), Note - 86 SERIES (W/ AXLE PIVOT BALL, NOT PIN), Note - 88 SERIES (EARLY W/ AXLE PIVOT BALL, NOT PIN), For a new version of this item use Item #: 109440, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435436) $9.51

Jam Nut - For the following tractors: Hydro 100, Hydro 185, Hydro 70, 1026, 1066, 1086, 1206, 1256, 1466, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 460, 544, 560, 660, 666, 686, 706, 756, 766, 786, 806, 826, 856, 966, 986, 2WD STD AXLE: 5088, 5288, 5488. Replaces 374062R1 (Item #: 105123, Ref: 192928M1) $8.40

Pivot Pin - For International / Farmall tractor models Hydro 100, Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3488, 3688, 5088, Replaces International OEM number 531239R1, O.D. .997", Length: 7.44", Center Steering Arm use Item #: 110334, (Item #: 109441) $41.00

Pivot Pin Bushing - For International / Farmall tractor models Hydro 100, Hydro 186, 786, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 531242R1, 2.006" ID, 2.125" OD, 1.49" Long, (Item #: 109574) $11.90

No
Picture
Replacement Pump Spring and Vane - For International / Farmall tractor models Hydro 70 (1/74-12/77), Hydro 86 (1/74-12/77), Hydro 100, Hydro 186 (1/72-12/78), 544 (Farmall, 1/66-12/73), 544 (1/66-12/73), 656 (Farmall, 1/66-12/73), 656 (1/66-12/73), 666 (1/72-12/72), 686 (1/69-12/71), 706 (1/63-12/67), 706 (Farmall, 1/63-12/67), 756 (1/67-12/71), 756 (Farmall, 1/67-12/71), 766 (1/72-12/78), 786 (Diesel, 1/74-12/80), 826 (1/69-12/71), 826 (Farmall, 1/69-12/71), 856 (1/86-12/83), 886 (Diesel, 1/74-12/80), 966 (Diesel, 1/71-12/71), 986 (Diesel, 1/74-12/79), 1026 (Diesel), 1066 (Diesel, 1/74-12/78), 1086 (Diesel, 1/74-12/79), 1466 (Diesel, 1/72-12/77), 1468 (Diesel, 1/74-12/76), 1486 (Diesel, 1/74-12/79), 1586 (Diesel, 1/74-12/79), 2544 (Diesel), 2656 (1/63-12/71), 2706 (1/63-12/67), 2756 (1/69-12/71), 2826 (Diesel, 1/69-12/71), 2856 (Diesel), 3088 (Diesel, 1/81-12/86), 3288 (Diesel, 1/81-12/86), 3488, 3688 (Diesel, 1/81-12/86), 5088 (Diesel, 1/81-12/87), 5288 (Diesel, 1/81-12/87), 5488 (Diesel, 1/81-12/87), 21026 (Diesel), Compatible with International Hay Cutting (s) 375, Replaces International OEM number 405788R91, Spring and vane used with pumps: 382579R94 and 400187R93, (Item #: 165421) $146.00

No
Picture
Ring Gear and Pinion Kit - For International / Farmall tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 3088, 3288, 3388, 3488, 3588, 3688, 6388, 6588, Replaces International OEM number 135770C2, 528684R91, 528707R93, 395828R1, Kit Includes: Ring Gear and Pinion, Lock Plate, Nut, Shim (.004"), (2) Shims (.007"), and Bearing and Retainer Assembly, For Bearing and Retainer Kit use Item #: 160584, (Item #: 177076) $2249.01

Spindle Bushing Kit - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 186, 404, 424, 444, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 786, 806, 826, 856, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 358958R2, 185106C1, 15943DA, (4) 358958R2 Bushings: 1-43/64" x 1-7/8" x 2", (2) 185106C1 Thrust Bearings: 1-3/4" ID x 2-3/4" OD, (2) 15943DA Dust Seals: 2-3/8" x 3" x 1/4", For Bushing use Item #: 102176, (Item #: 104350) $58.00

No
Picture
Spindle Jam Nut - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2404, 2424, 2444, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3488, 3688, 5088, 5288, 5488, 21026, 21206, 21256, 21456, Replaces International OEM number 427546, 1-3/8"-12, (Item #: 100852) $4.00

Spindle Kit - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 71785TM, Right or left hand, Taper mate system, Dimension A: 12.75", Dimension B: 1.667", Dimension C: 1.78", Dimension D: 1.375", Spline: 17, Includes spindle, nut, ring, and washer, (Item #: 100849) $246.00

No
Picture
Spindle Kit,Taper Mate - Right Hand/Left Hand - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 4156, 5088, 5288, 5488, Kit includes spindle, nut, ring and washer and steering arm, Fits left or right hand side, Dimension A: 12.75", Dimension B: 1.667", Dimension C: 1.78", Dimension D: 1.375", For wheel bearing kit use Item #: 100856, Additional Handling and Oversize Fees Apply To This Item, (Item #: 100850) $284.00

$Farmall 3488 Spindle, Taper-lok - Right Hand\Left Hand$
Spindle, Taper-lok - Right Hand/Left Hand - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 71785SPO, Splines: 17, Left Hand or Right Hand Side, Shaft: 12.875", Shaft Diameter: 1.667", Large Race: 1.780", Small Race: 1.375", For wheel bearing kit use Item #: 100878, (Item #: 125215) $273.00

Steering Arm - Left - TAPER-LOK Spindle - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 531248TM, Left Hand Arm, (Item #: 110714) $119.00

No
Picture
Steering Arm - Left Hand, Split Style - For International / Farmall tractor models Hydro 100, Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces OEM number 148418C1, 405459R1, 531248R1, 531248R2, Split Design with Nut and Bolt, For Right Hand use Item #: 177039, (Item #: 177037) $112.00

Steering Arm - Right - TAPER-LOK Spindle - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 531248TM, Right Hand Arm, (Item #: 110715) $99.00

No
Picture
Steering Arm - Right Hand, Split Style - For International / Farmall tractor models Hydro 100, Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces OEM number 148419C1, 405460R1, 531249R1, 531249R2, Split Design with Nut and Bolt, Spline Count: 24, For Left Hand use Item #: 177037, (Item #: 177039) $128.61

Steering Arm - Undersized Right Side - Square Shoulder Spindles - For International / Farmall tractor models Hydro 100, Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, Replaces International OEM number 531249R2US86, 531249R2, Right hand side, Fits Spindles with square shoulder below spline, Spline is .030" undersized, For Spindles with snap ring groove below spline use 100890, (Item #: 100892) $40.50

Steering Arm Bushing - For International / Farmall tractor models Hydro 100, Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, Replaces International OEM number 71788C1, O.D. 1.133", I.D. 1.012", Width: 1.00", Center Pivot Pin use Item #: 110329, (Item #: 110334) $8.00

Steering Arm, Center - For tractor models Hydro 100, Hydro 186, 766, 786, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488. Replaces 531235R11. (Item #: 110329, Ref: 71787C91) $363.00

$Farmall 3488 Steering Arm, Taper Mate Style - Right Hand\Left Hand$
Steering Arm, Taper Mate Style - Right Hand/Left Hand - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488 (Hydro), 3688, 5088, 5288, 5488, Replaces International OEM number 531249TM, 531248TM, Right or left side, For Taper-Mate Spindles only, (Item #: 100889) $73.00

Steering Arm, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488 (Hydro), 3688, 5088, 5288, 5488, Replaces International OEM number 531249R2, 531248R2, Right or Left side, For Taper-Mate Spindles only, For a new version of this item use Item #: 100889, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400889) $35.01

No
Picture
Steering Kit - Left Hand - For International / Farmall tractor models Hydro 100, Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 196334R1, 71785C92, 371343R91, 359984R93, 382412R91, 383915R91, 148418C1, 531248R1, 531248R2, Kit includes: spindle, tie rod assembly and steering arm, Kit is for left hand side only, Splines: 24, For spindle use Item #: 189280, (Item #: 189278) $432.00

No
Picture
Steering Kit - Right Hand - For International / Farmall tractor models Hydro 100, Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 196334R1, 71785C92, 371343R91, 359984R93, 382412R91, 383915R91, 531249R2, Kit includes: spindle, tie rod assembly, and steering arm, Kit is for right hand side only, Splines: 24, For spindle use Item #: 189278, (Item #: 189280) $444.00

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $8.00

Taper Lock Snap Ring - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 71785, (Item #: 128038) $2.70

Taper Lock Washer - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 71785, (Item #: 128039) $4.00

Taper Lok Nut - For International / Farmall tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 656, 666, 686, 756, 766, 786, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Replaces International OEM number 71785, (Item #: 128037) $4.90

Transmission Speed Control Ball Joint - For International / Farmall tractor models Hydro 186, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, Replaces Case OEM number 104110C1, Thread: 3/8-24 UNF Thread, (Item #: 163709) $41.40

No
Picture
Trunnion Bolt - For International / Farmall tractor models Hydro 100, Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1468, 1486, 1566, 1568, 1586, 3488, 3688, 5088, Replaces International OEM number 531238R1, 5/8"-18 UNF, For 66 Series With Block Type Power Steering Cylinder End, With Axle Pivot Ball, 86 and 88 Series With Axle Pivot Ball Not Pin, (Item #: 110744) $5.10

Trunnion Bushing - For International / Farmall tractor models Hydro 100, Hydro 186, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1566, 1586, 3488, 3688, 5088, Replaces International OEM number 533283R1, For tractors with pivot ball axles not pin type, Front Axle Trunnion use Item #: 109440, (Item #: 110375) $7.00

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 133205R91 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.20

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.70

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $15.10

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $9.10

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $8.70

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 3488 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy