(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford 800 Parts

Category: Hydraulic System

[Categories]   [All 800 Parts]   [All Ford Models]  


Ford 800 Bearing
Bearing
- Needle Bearing Assembly for Pump Housing. For 2000, 4000, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, Jubilee, NAA. Replaces: 36433, NCA881A (Part No: NCA881A)
$9.89

Ford 800 Breakaway Clamp, Double
Breakaway Clamp, Double
- Double Break-Away Clamp. For tractor models 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 500, 5000, 5600, 600, 620, 630, 640, 650, 660, 6600, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Part No: 5006-4)
$18.64

Ford 800 Clamp
Clamp
- Double Break-Away Clamp. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 500, 5000, 5600, 5900, 600, 620, 630, 640, 650, 660, 6600, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Part No: 9006-4)
$31.61

Ford 800 Clamp, Double Break-Away, Hydraulic
Clamp, Double Break-Away, Hydraulic
- For use with Pioneer series 4000 and Safeway type S20-4 and S40-4 Couplers. Quik-Cover Assembly HV4957 fits this clamp. Used on tractors with Single Pump Hydraulic System, 1955 thru 1981 models. For tractor models 500, 600, 700, 800, 900, 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600. (Part No: S42-4)
$25.14

Ford 800 Coupler Hub, Hydraulic Pump
Coupler Hub, Hydraulic Pump
- For use with Loader-Backhoe Hydraulic Pumps. Hub is 4 inches overall diameter, 4 mounting holes at 7/16 inches in diameter, smooth type, 2-3/4 inch spacing. 1-3/8 inch relief diameter, 9/16 inch depth, 10 spline, 1 inch center bore. (Note: Non-spline coupler hubs (splined) are available in 5/8, 3/4, and 7/8 inches -CALL). For tractor models 2000, 4000, 501, 600, 620, 630, 640, 650, 660, 700, 740, 741, 750, 701, 800, 820, 840, 850, 900, 950, 960, Jubilee, NAA. (Part No: 290421)
$37.43

Ford 800 Cylinder with Unload Valve
Cylinder with Unload Valve
- Hydraulic Cylinder with Unload Valve. Does not include Control Valve. Fits 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta. (Part No: C5NN477B)
$619.56

Ford 800 Cylinder without  Valve
Cylinder without Valve
- Hydraulic Cylinder without Unload Valve. Fits 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta. (Part No: C5NN477BLV)
$191.82

Ford 800 Cylinder, Side Link
Cylinder, Side Link
- Side Link Hydraulic Cylinder. (Part No: HSL3201)
$277.59

Ford 800 Cylinder, Top Link
Cylinder, Top Link
- Top Link Hydraulic Cylinder. (Part No: HTL3101)
$287.55

Ford 800 Draft Control Plunger
Draft Control Plunger
- For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta. (Part No: 8N541B)
$45.89

Ford 800 Draft Control Plunger Spring
Draft Control Plunger Spring
- This Draft Control Plunger Spring fits between the Hydraulic Plunger and Yoke. Fits 9N, 2N 8N, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000 (except row crop), Dexta, Super Dexta. (Part No: 9N547B)
$22.95

Ford 800 Draft Control Spring Plate
Draft Control Spring Plate
- This Draft Control Spring Plate is used on Ford tractors from 1939 to 1964. It replaces: 81801555, 957E527, 9N527, NCA527A. I you need the plate with the pin, order 8N527. (Part No: 9N527)
$10.50

Ford 800 Draft Control Spring Plate, with Pin
Draft Control Spring Plate, with Pin
- This plate has the pin. For tractor models 8N, NAA, 1801, 2000, 2030, 2031, 2110, 4000, 4030, 4040, 4110, 501, 600, 601, 700, 701, 800, 801, 900, 901, Dexta, Super Dexta. ``Replaces 81801555, 957E527, 9N527, NCA527A. If you need the plate without the pin, order 9N527. (Part No: 8N527)
$14.50

Ford 800 Draft Control Spring Seat
Draft Control Spring Seat
- Exact of original. Fits all models (1939 to 1964), NAA, Jubilee, Dexta, Super Dexta, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 2000, 4000. Replaces: 2N624, 957E624. (Part No: 2N624)
$9.15

Ford 800 Felt, Spring Seat
Felt, Spring Seat
- Hydraulic Lift Draft Control Spring Seat. For tractor models 8N, 9N, 2N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, (1939-1962). (Part No: 9N529)
$3.95

Ford 800 Friction Disk
Friction Disk
- Friction Disk for Hydraulic Control Lever, 3 inch diameter, 1/2 inch hole. For tractor models 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, NAA, (2000 and 4000 4 cylinder). Price is for each. (Part No: C5NN518B)
$1.13

Ford 800 Gasket Kit, Hydraulic
Gasket Kit, Hydraulic
- Piston Type Hydraulic Pump Gasket and O-Ring Kit. For 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Part No: FPN910B)
$13.13

Ford 800 Gasket, Hydraulic Pump Drain
Gasket, Hydraulic Pump Drain
- Fits Ford Tractors, 1939 to 1964. Replaces: 81804570, 8N7011. (Part No: 8N7011)
$.45

Ford 800 Hose Bracket
Hose Bracket
- Hydraulic Hose Coupler Bracket. For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 5900, 500, 600, 620, 630, 640, 650, 660, 6600, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Part No: D6NND916D)
$42.57

Ford 800 Hydraulic Adapter Kit
Hydraulic Adapter Kit
- Hydraulic adapter plate kit. Contains 1-HV4901 adapter plate, mounting cap screws, O-rings and mounting instructions. For 2000, 230, 231, 233, 234, 2600, 3000, 333, 334, 335, 340, 3600, 4000, 420, 445, 4600, 5000, 500, 515, 530, 532, 535, 545, 5600, 600, 6600, 700, 800, 900. (Part No: HV4902)
$45.93

Ford 800 Hydraulic Lift Control Quadrant
Hydraulic Lift Control Quadrant
- For tractor models 8N, 9N, 2N. Hydraulic Lift Control Lever connects to this. Also fits NAA, Jubilee, 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. All 1939-1964 4 cylinder. Replaces 2N516A1, 2N516A2, 2N516B. (Part No: 9N515)
$21.36

Ford 800 Hydraulic Lift Cover Repair Kit
Hydraulic Lift Cover Repair Kit
- Hydraulic Lift Cover Repair Kit. For 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. All prior to 1965. Kit contains (1) C0NNB999A seal, (1) NCA473A washer, (1) 9N532 gasket, (1) NCA502A gasket and (20) O-rings. Will work for Dexta and Super Dexta if piston has been changed to o-ring and back-up rind style. E11GF9 single groove gland seal is available separately. (Part No: LCRK5564)
$7.08

Ford 800 Hydraulic Lift Cylinder Piston
Hydraulic Lift Cylinder Piston
- Piston ONLY. Back-up ring NCA473A and o-ring seal 87111S95 are NOT included. This lift cylinder piston is 3 inches in diameter. Fits 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2600, 3000, 3600, 4000, Dexta, Super Dexta. Replaces C5NN530B. (Part No: C5NN530B)
$24.30

Ford 800 Hydraulic Lift Lever
Hydraulic Lift Lever
- For tractor models 8N, 9N, 2N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 4 Cylinder). (Part No: S.66598)
$20.63

Ford 800 Hydraulic Lift Oil Level Dipstick
Hydraulic Lift Oil Level Dipstick
- Fits Ford 4 Cylinder tractor models: (1954 to 1964) 1801, 2000, 4000, 600, 601, 700, 701, 800, 801, 900 and 901. Replaces NCA927B. (Part No: NCA927B)
$17.85

Ford 800 Hydraulic Lift Piston Connecting Rod
Hydraulic Lift Piston Connecting Rod
- For Dexta, NAA, 2N, 8N, 9N, 2000, 3000, 4000, 600, 700, 800, 900. Replaces NCA526A and 957E526, 9N526. (Part No: 86563314)
$18.59

Ford 800 Hydraulic Lift Ram Arm
Hydraulic Lift Ram Arm
- For 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 4000. All before 1965 and with 4 cylinder engines. (Part No: NCA545B)
$104.13

Ford 800 Hydraulic Lift Shaft
Hydraulic Lift Shaft
- For tractor models: 8N, 9N, 2N, NAA, Jubilee, 2000, 4000, 600, 601, 700, 701, 800, 801, 900, 901. Hydraulic lift shaft. [PLEASE NOTE: THIS SHAFT HAS 1 THREADED HOLE ON EACH END. IT WILL REPLACE OLDER STYLE USED ON 8N, 9N, 2N TRACTORS WITH 2 HOLES ON EACH END BUT WILL REQUIRE 2 WASHERS PART number NCA551A and (2) 7/16 inch-20 X 11/16 inch BOLTS. WASHERS AND BOLTS NOT CURRENTLY AVAILABLE FROM YESTERDAYS TRACTOR]. (Part No: NCA544B)
$298.07

Ford 800 Hydraulic Lift Shaft Arm
Hydraulic Lift Shaft Arm
- For 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 4000 gas. (Part No: 9N543B)
$62.03

Ford 800 Hydraulic Lift Shaft Bushing
Hydraulic Lift Shaft Bushing
- 2 used. Inside diameter 2.000 inches, outside diameter 2-3/8 inches, length 3.00 inches. For tractor models 8N, 9N, 2N, NAA, 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 2000, 3000, 4114. (Part No: 9N531C)
$17.52

Ford 800 Hydraulic Lift lever Assembly
Hydraulic Lift lever Assembly
- For 8N, 9N, 2N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 PRIOR TO 1965. Assembly contains: Lift control lever with ball end part number 2N512, lift control plate (cast aluminum as original) part number 2N-516A2 and friction disc part number C5NN518B. (Part No: 2N512)
$43.11


NOTE
Hydraulic Parts, Universal
- Universal hydraulic parts such as hoses, filters, pressure gauges etc.. can be found in the Accessories and Universal parts section.
NOTE

Ford 800 Hydraulic Pump
Hydraulic Pump
- Complete Piston Type Pump can also replace the Vain Style Pump (Hydraulic Manifold must be changed to a Piston Type if replacing a Vain Type. Available for an NAA only as part number NAA876A). Replaces NCA600C and NCA600F. For NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4 cylinder, 4000 4 cylinder. Replaces: NAA600D, NCA600C, NCA600F.````+++ This item may take up to two weeks for delivery. (Part No: NAA600D)
$888.03

Ford 800 Hydraulic Pump Drive Shaft
Hydraulic Pump Drive Shaft
- Hydraulic pump shaft. 3/4 inch diameter, 9-1/4 inch overall length. End A type: key, 3/4 inch size, End B type: 6 spline, 3/4 inch size. Associated components end A flex. coupler: L601-14 (3/4 inch bore drive flanges both sides), end B hub: 1 inch. Fits NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 820, 840. (Part No: 194355)
$26.57

Ford 800 Hydraulic Pump Drive Shaft
Hydraulic Pump Drive Shaft
- Shaft is 3/4 inch diameter, 9-3/8 inches overall length. End A type: key, 3/4 inch size. End B type: 10 spline, 1 inch size. Associated components: end A mates to flex coupler number: L601-14 (3/4 inch bore drive flanges both sides) and end B mates to hub number: 290421. Pump Drive for 1953-1964 tractors: 600, 601, 700, 701, 800, 801, 900, 901, Jubilee, NAA, 2000, 4000. (Part No: 195454)
$34.04

Ford 800 Hydraulic Pump Gear
Hydraulic Pump Gear
- Main gear for piston pump. Center of gear is 6 spline. Replaces NCA908A. For tractor models 2000, 4000, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, NAA. (Part No: C3NN908A)
$39.81

Ford 800 Hydraulic Pump Gear Housing
Hydraulic Pump Gear Housing
- For tractor models NAA, 600, 601, 700, 701, 800, 801, 900, 901. (Part No: NCA905C)
$185.38

Ford 800 Hydraulic Pump Hub
Hydraulic Pump Hub
- Hydraulic pump hub for Sherman 54 series loader. Hydraulic pump hub 3 7/8 inch outside diameter, 2 3/4 inches center to center on holes. 6 spline center bore, 3/4 inch inside diameter. (Part No: 54C2055)
$40.11

Ford 800 Hydraulic Pump Repair Kit
Hydraulic Pump Repair Kit
- This Hydraulic Pump Repair Kit is for the Piston Type Pump. Services 1953-1964 four cylinder gas and diesel tractors. For tractor models NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 800, 801, 900, 901, 2000, 4000. Will service NCA600C and NCA600F pumps. Replaces CCPN600A and CCPN600B. (Part No: CCPN600AB)
$55.13

Ford 800 Hydraulic Pump Shaft
Hydraulic Pump Shaft
- Wobble Shaft For 4 Cylinder Models (1953-1964) Using NAA600D Or NCA600F Pump Assemblies. For tractor models: 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681 (Part No: NCA966E)
$54.23

Ford 800 Hydraulic Pump Shaft Bearing Cone
Hydraulic Pump Shaft Bearing Cone
- Use with pump shaft NCA966E. For tractor models NAA, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, (2000, 4000 1964 and prior). (Part No: D5NN1201A)
$5.03

Ford 800 Hydraulic Pump Shaft Bearing Cup
Hydraulic Pump Shaft Bearing Cup
- Use with pump shaft NCA966E. For tractor models NAA, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, (2000, 4000 1964 and prior). (Part No: D5NN1202A)
$2.54

No
Picture
Hydraulic Pump Shaft Oil Seal
- For piston type pump. Measures inside diameter 0.9350 inch, outside diameter 2.004 inch, width 0.5315 inch. For tractor models: NAA, 600, 601, 700, 701, 800, 801, 900, 901. (Part No: NCA851A)
$5.35

Ford 800 Hydraulic Pump Valve Assembly
Hydraulic Pump Valve Assembly
- This Hydraulic Pump Valve Assembly fits 4 cylinder Ford Tractors built between 1954 and 1964. For the following models: 1801, 1811, 1821, 1841, 1871, 1881, 2000 4 cylinder, 2030, 2031, 2110 4 cylinder, 2111, 2120 4 cylinder, 2121, 2130, 2131, 4000 4 cylinder, 4030 4 cylinder, 4031, 4040, 4110 4 cylinder, 4120, 4121, 4130 4 cylinder, 4131, 4140 4 cylinder, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAB. It replaces original part numbers 86512642 and NCA638C. (Part No: NCA638C)
$107.99

Ford 800 Hydraulic Valve Kit
Hydraulic Valve Kit
- Valve, Hydraulic, with handle, Single-Spool Multi-Valve. No relief, tandem (4-way) spool, convertible to 3-way, spring center to neutral, with 90 degree rotated handle. Fits Models: 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600. (Part No: HV4012)
$229.55

Ford 800 Hydraulic Valve Kit
Hydraulic Valve Kit
- Valve with handles, two-spool, 2000 psi. Relief, one-spool tandem (4-way) float position with spring center to neutral and one spool tandem (4-way) spring center to neutral. Fits Models: 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600. (Part No: HV4021)
$344.37

Ford 800 Hydraulic Valve Kit
Hydraulic Valve Kit
- Kit Assembly, includes 2-Spool Valve with handle. Fits Models: 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Part No: HV4120)
$624.37

Ford 800 Hydraulic Valve Kit
Hydraulic Valve Kit
- Kit Assembly, includes 2-Spool Valve, Valve Box with handles. For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Part No: HV4122)
$673.62

Ford 800 Hydraulic Valve Kit
Hydraulic Valve Kit
- Valve with handles, two-spool, 2000 psi. Relief, tandem (4-way) spool, spring center to neutral. Fits Models: 500, 600, 620, 630, 640, 650, 660, 740, 750, 820, 840, 850, 950, 960, 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600. (Part No: HV4020)
$307.52

Ford 800 Hydraulic Wobble Shaft Thrust Plate
Hydraulic Wobble Shaft Thrust Plate
- This Wobble Shaft Thrust Plate (Bearing) is used in Piston Style Pumps. Fits Models: NAA, Jubilee, 231, 335, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 531, 540, 541A, 540B, 545. 545A, 545C, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3600, 3610, 3910, 4000, 4500, 4600. It replaces original part numbers NCA858A, 81802059, C0NN858A. (Part No: C0NN858A)
$58.30

Ford 800 Hydraulic cylinder Kit
Hydraulic cylinder Kit
- 2-Spool Valve and Cylinder Kit Complete. For tractor models 230, 231, 233, 234, 333, 334, 335, 340, 420, 445, 500, 515, 530, 532, 535, 545, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600. (Part No: HCKF262)
$1053.90

Ford 800 Hydraulic hose Assembly
Hydraulic hose Assembly
- This Hydraulic Hose with fittings is 26 inches in length. The straight end has 1/2 inch NPT and the 90 degree end has 9/16 inch ORB. For tractor models 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600. (Part No: H31-SPL-26)
$43.44

Ford 800 Lift Cylinder Safety Valve
Lift Cylinder Safety Valve
- For tractor models: 2000 (4 cylinder 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3055, 3110, 3120, 3150, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3500, 3600, 3600V, 3610, 3900, 3910, 4000, (4110, 4120, 420, 445, 445A, 450, 4600, 4600SU, 4610, 515, 545A, 600, 6000, 601 1962-1964, ) 650, 660, 701, 800, 801, Dexta, Super Dexta. Also replaces 957E9842 and C5NN984A. (Part No: 957E984B)
$24.75

Ford 800 O-Ring Kit
O-Ring Kit
- O-Ring Kit, Valve Mounting. For 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600. (Part No: DHPN485A)
$3.29

Ford 800 Piston O-Ring
Piston O-Ring
- This o-ring is used with C5NN530B 3 inch piston. Fits Models: 230A, 231, 233, 234, 333, 334, 340, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2110LCG, 2310, 2600, 2610, 3000, 3400, 3500, 3600, 3610, 4000, 4110LCG, Dexta, Super Dexta. Replaces 87111S95, 381871R1, 81845041. (Part No: 87111S95)
$0.59

Ford 800 Piston Washer
Piston Washer
- This Backing Washer is used with C5NN530B 3 inch piston. Fits Models: 2N, 8N, 9N, 230A, 231, 233, 234, 333, 334, 340, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2310, 2600, 2610, 3000, 3400, 3500, 3600, 3610, 4000, Dexta, Super Dexta. It replaces original part numbers NCA473A and 81801439. (Part No: NCA473A)
$1.88

Ford 800 Quadrant Stop Kit
Quadrant Stop Kit
- For tractor models 2000 4 Cylinder, 2N, 4000 4 Cylinder, 8N, 9N, Jubilee, NAA, NAB, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031 all with 4 Cylinder from 1939 to 1964. (Part No: 9N521)
$6.09

Ford 800 Remote Control Kit
Remote Control Kit
- Single Spool, Single/Double Acting with Hoses - Female Couplers. For models: Ford up to 1965: 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. After 1965: 2000, 3000, 4000, 2600, 3600, 3900, 4100, 4600, 2310, 2610, 2810, 2910, 3610, 4110, 4610, 3230, 3430, 3930, 4630 (Part No: S.68981)
$275.93

Ford 800 Selector Valve
Selector Valve
- The Selector Valve is used on multiple Ford Tractors. Fits Models: 230, 231, 233, 234, 250, 260, 333, 334, 335, 340, 345, 420, 445, 450, 515, 530, 531, 532, 535, 540, 545, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2110, 2600, 2610, 2810, 2910, 3000, 3230, 3400, 3430, 3500, 3550, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4500, 4600, 4610, 4630, 4830, 5030. Replaces original part numbers: C5NND960C, E0NND960AA, 83906348, 83924886. (Part No: E0NND960AA)
$190.79

Ford 800 Valve
Valve
- Valve, Single-Spool, Pressure Detent, less handle. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900 950, 960. Replaces 83944760, D9NNB9500BB, D9NNB950BA, D9NNB950BBGV. (Part No: D9NNB950BB)
$697.82

No
Picture
Valve
- Valve, Single-Spool, (Non-Detent/Spring Centering) less handle. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 6600, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Part No: E1NNB950AB)
$487.28

No
Picture
Valve
- Valve, Double-Spool, (Non-Detent/Spring Centering) less handle. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 6600, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Part No: E1NNB950BB)
$753.01

No
Picture
Valve
- Valve, Double-Spool, Pressure Detent, less handle. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Part No: E2NNB950CA)
$930.29

Ford 800 Valve 1SP With H
Valve 1SP With H
- Kit Assembly, includes 1-Spool Valve (Pressure Detent), handle and Valve Mounting Kit. For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Part No: D9NNB950BB-KIT)
$706.96

No
Picture
Valve Handle
- Handle with blue vinyl coated grip, for 1 and 2 Spool Valves. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Part No: D3NNB936A)
$20.49

Ford 800 Valve Kit, 1 Spool
Valve Kit, 1 Spool
- Kit Assembly, includes 1-Spool Valve (Pressure Detent), hoses, dust cover, couplers, Handle and Valve Mounting Kit. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Part No: DGPNB950K1-KIT)
$940.79

Ford 800 Valve Kit, 1 Spool
Valve Kit, 1 Spool
- Kit Assembly, includes 1-Spool Valve (Non-Detent/Spring Centering), Handle and Valve Mounting Kit. For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Part No: E1NNB950AB-KIT)
$524.19

Ford 800 Valve Kit, 1 Spool
Valve Kit, 1 Spool
- These kits include Single Spool Valve (Non-Detent/Spring Centering), Hoses, Hose Couplers, Coupler Bracket, Self Closing Dust Covers and Handle Mounting Kit. Valves are current OEM design and bolt to tractor top hydraulic cover in place of accessory plate. Control handles are operated from RH side of operators seat. For tractor models 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 3000, 4000 all 1965 and before. 2000, 3000, 4000, 5000 all 1965-1975. 2600, 3600, 4600, 5600, 6600 all 1975-1981. 2610, 3610, 4610 equipped with single pump hydraulic system, all 1981 and up. (Part No: DGPNB950S1-KIT)
$744.52

Ford 800 Valve Kit, 2 Spool
Valve Kit, 2 Spool
- Kit Assembly, includes 2-Spool Valve (Non-Detent/Spring Centering), Handle and Valve Mounting Kit. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Part No: E1NNB950BB-KIT)
$788.73

Ford 800 Valve Kit, 2 Spool
Valve Kit, 2 Spool
- Kit Assembly, includes 2-Spool Valve (Pressure Detent), handle and Valve Mounting Kit. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Part No: E2NNB950CA-KIT)
$913.68

Ford 800 Valve Kit, Double Spool Valve
Valve Kit, Double Spool Valve
- Kit Assembly, includes Double Spool Valve (Non-Detent/Spring Centering), Hoses, Dust Cover, Couplers, Handle and Valve Mounting Kit. Valves are of current OEM design and bolt directly to tractor top hydraulic cover in place of accessory plate control handle are operated from RH side of operators seat. For tractor models 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 3000, 4000 all 1965 or before, 2000, 3000, 4000, 5000 all 1965-1975, 2600, 3600, 4600, 5600, 6600 all 1975-1981, 2610, 3610, 4610 all equipped with single pump hydraulic system 1981 and up. (Part No: DGPNB950S2-KIT)
$1144.59

Ford 800 Valve Less Handle
Valve Less Handle
- Valve, 2-Spool, 2000 psi. Relief, Tandem (4-way) Spool, spring center to neutral, less handles. Fits Models: 230, 231, 233, 234, 333, 334, 335, 340, 420, 445, 500, 515, 530, 532, 535, 545, 620, 630, 640, 650, 660, 740, 750, 820, 840, 850, 950, 960, 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5900, 6600. (Part No: HV4023)
$277.09

Ford 800 Valve Less Handle
Valve Less Handle
- Valve, 3-Spool, 2000 psi. Relief, Tandem (4 way) Spool, Spring Center to Neutral, less Handles. Fits Models: 230, 231, 233, 234, 333, 334, 335, 340, 420, 445, 500, 515, 530, 532, 535, 545, 620, 630, 640, 650, 660, 740, 750, 820, 840, 850, 950, 960, 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5900, 6600. (Part No: HV4033)
$696.49

No
Picture
Valve Mount Kit
- Handle and Valve Mounting Kit, Single-Spool. For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Part No: 309972F)
$41.61

Ford 800 Vane Style Hydraulic Pump Shaft
Vane Style Hydraulic Pump Shaft
- This Vane Style Hydraulic Pump Shaft comes with drive key. It is used on Ford 600, 620, 630, 640, 650, 660, 700, 740, 800, 820, 840, 850, 860, 900, 940, 950, 960 all using square vane hydraulic pumps (1954 to 1955; up to serial number 66849). It is 4.442 inches long, it has a 0.601 inch outside diameter on the keyed end and a 0.450 inch outside diameter on the splined end. It replaces key: 356961-S and shaft: NCA966A. (Part No: NCA966A)
$94.25

Ford 800 Vane Type Hydraulic Pump Kit
Vane Type Hydraulic Pump Kit
- For 5/8 inch thick Vane Rotor. For tractor models NAA, Jubilee, 600, 700, 800, 900. Replaces: vane set: CPN981A, ring: EAF973B, o-ring: EAF980A (Part No: CPN972B)
$380.00

Ford 800 Vane Type Hydraulic Pump Kit
Vane Type Hydraulic Pump Kit
- For 3/4 inch thick Vane Rotor. For tractor models NAA, Jubilee, 600, 700, 800, 900. (Part No: CPN972C)
$380.00



Ford 800 Coupler Flange
Coupler Flange
- FORD: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b (Part No: L36-6)
$57.62

Ford 800 Coupler Flange
Coupler Flange
- Drive flange; 3/4" round bore with set screw 1/4" x 3/8". 1-15/16" spacing. For Morflex series 302. Replaces: L363, 191061, 1752219M91, L36-3 (Part No: 191061)
$17.93

Ford 800 Coupler Hub Drive Kit
Coupler Hub Drive Kit
- Coupler Complete, Morflex Series 302. Contains center member, 2 drive flanges with set screws, and 4 bolts with lock nuts. The center member is 3-1/8 inch diameter, with four 1/4 inch holes and 1-15/16 inch spacing.The drive flange is 3/4 inch round bore with set screw 1/4 inch by 3/8 inch. (Part No: L601-14)
$103.25

Ford 800 Coupler for Pump Shaft
Coupler for Pump Shaft
- The Hydraulic Pump Saft Coupler is 1-1/2 Outside Diameter and 2-1/4 inches long. It 7/8 inch 13 splined inside. It replaces 1631413, 350-1631413, S340 (Part No: S340)
$19.79

Ford 800 Cylinder Seal Kit, For 2 inch cylinders
Cylinder Seal Kit, For 2 inch cylinders
- For TISCO side and top link replacement cylinders. Seal Repair Kit for 2 inch cylinders. For cylinder numbers: HTL2101, HTL2102, HTL2103, HSL2201, HSL2202, HSL2203. Replaces HSK2001. (Part No: HSK2002)
$14.65

Ford 800 Hydraulic Valve Kit
Hydraulic Valve Kit
- Valve with handles, three-spool, 2000 p.s.i. Relief, all spools tandem (4-way) spring center to neutral. (Part No: HV4030)
$787.98

Ford 800 LBP Coupler Center
LBP Coupler Center
- Center member. Center member. 3-5/8" O.D., four 5/16" holes, 2-1/4" bolt circle (L52-10) For tractor models 352. (Part No: 192169)
$48.58

Ford 800 Moreflex Series 352 Coupler Drive Flange
Moreflex Series 352 Coupler Drive Flange
- Coupler for Hydraulic pump drive shaft. 13 spline for 7/8 inch diameter shaft. 5/16 inch diameter bolt holes, 2-1/4 inch on center. For 352. (Part No: L78-13)
$31.43

Ford 800 Morflex Center Member
Morflex Center Member
- This is a 1-302 Morflex Center member. It measures 3-1/8" diameter, four 1/4" holes, 1-15/16" bolt circle. Replaces part numbers 893129, 191192, L5227, 1506097M91, 1086870M1, 191192LBP, 1752218M91, L52-27 (Part No: 191192LBP)
$39.56

Ford 800 Top Link, Hydraulic
Top Link, Hydraulic
- FORD: Hydraulic top link cylinder. All ports 9/16 inch-18 O-ring boss with two adapters 9/16 inch-18 ORBM x 1/4 inch NPTM 90 degree swivel. 3 cylinder bore, 8 stroke length, 26 inch closed length, 12-7/16 inch barrel length, 1 inch rod end diameter, 1-3/4 inch rod end width, 1 inch diameter base end. (Part No: HTL3103)
$270.02

Ford 800 Universal Pressure Gauge, Hydraulic
Universal Pressure Gauge, Hydraulic
- 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel Silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas Crystal. 1/4 NPT male brass fitting. (Part No: GG400)
$11.13

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hydraulic System

[Categories]   [All 800 Parts]   [All Ford Models]  







PayPal


Customer Service
Monday - Friday
9:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure


  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2018 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.