FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Case 996 Parts

Category: Steering

[Categories] [All 996 Parts] [All Case Models]

Axle Support Bushing - Used on Carraro 4WD front ends, this bushing measures 4.921 inches outside diameter, 4.527 inches inside diameter and is 1.653 inches long. Replaces OEM numbers K965756, K965265, 1-33-241-048, 9967992, K965265, CAR101575/1, CAR123477, CAR1015751, 9967992, 83930079, 83930554, R113767, 3541395M1 (Item #: 156131, Ref: CAR1015751) $91.21

Front Axle - Differential Housing Bushing - The measurements on this bushing are: 4.525 inches outside diameter, 4.127 inches inside diameter, 1.730 inches long. This bushing is used on Carraro 4WD front end. Replaces OEM numbers 101565, K965266, CAR1015651, 83945601, CAR101565/1, CAR123478, 83930062, 9967993, R113766, 3541396M1, 040953R1 (Item #: 156132, Ref: CAR1015651) $79.00

Front Axle O-Ring - Many Carraro 4WD front axle equipped use this o-ring at the front of the pivot assembly. This part replaces OEM numbers 83957130, 83959520, CAR28556, N805193S91, 85807958, K965267, 28103 (Item #: 156146, Ref: CAR28556) $1.20

Front Spindle - Spindle For tractor models 1200 Selectomatic, 1210 and 1212 Std. Clearance, 1210 and 1212 Std. Clearance, 1210 and 1212 Quiet Cab and Deluxe Cab, 990, 995, 996 All with Quiet and Deluxe Cab 58-80 inch Tread, 1490 Std. Clearance, 1690, 1494 and 1594 Std. Clearance. The wheel bearing kit used for this spindle is part number WBKAC6. (Item #: 104359, Ref: K962019) $333.00

Front Spindle - Verticle shaft measures 18.125 length and diameter of 1.374. Spindle For tractor models 880A and 880B Selectomatic, 990, 995, 996 All High Clearance, 990 A and B Selectomatic High Clearance, 990, 995, 996 Quiet and Deluxe Cab High Clearance 52-76 inch Tread, 1290, 1390, (1294 SN# 114911460, (1394 SN# 11504412 and up) All High Clearance. (Item #: 100314, Ref: K262211) $185.00

Front Spindles - Spindle For 880A and B Selectomatic Std. Clearance, 880 and 990 Implematic, 990, 995, 996 All Standard Duty, 990 A and B Selectamatic Std. Clearance, 990, 995, 996 All Quiet and Deluxe Cab 52-76 inch Tread, 1290 and 1390 Std. Clearance, 1294 SN# 11491146-Up, 1394 SN# 11504412-Up Standard Clearance. The wheel bearing kit used for this spindle is part number WBKCA7. (Item #: 100313, Ref: K262209) $229.00

Hub Bearing Kit, Front - Early parallel spindles. Contains OEM part numbers for the bearings of 255802552 and 19150. Contains seal measuring 2.75 inches inside diameter, 3.75 inches outside diameter and 1/2 inch width. For tractor models 880, 885, 950, 990, 995, 996, 1190, 1290, 1390, (1194 up to SN# 11480679), (1294 up to SN# 11491145), (1394 up to SN# 11504411), 1190, 1290, 1390, 1194, 1294, 1394. (Item #: 104394, Ref: K962986) $146.00

Hub Bearing, Inner - Used on Case / David Brown models 1290, 1390, 1394, 1490, 1494, 990, 995, 996 with mechanical four wheel drive. This Bearing replaces 25745, K965321, 81864405, CAR25745, 3140669R91 (Item #: 180505, Ref: K965321) $81.00

Hub Seal, Primary Four Wheel Drive - Used on four wheel drive front axles on Case / David Brown models 990, 995, 996, 1290, 1390, (1394 up to serial number 11503000 Axle serial number to DB13V349), 1490, (1194 up to serial number 1151800, Axel serial number to DB14/1440), 2094, 2290. This part replaces 102148, CAR102148, K965323, 83930064 (Item #: 182901, Ref: K965323) $149.00

Hub Seal, Secondary, Four Wheel Drive - Used on four wheel drive front axles on Case / David Brown models 990, 995, 996, 1290, 1390, (1394 up to serial number 11503000 Axle serial number to DB13V349), 1490, (1194 up to serial number 1151800, Axel serial number to DB14/1440), 2094, 2290. Measures 140 x 170 x 16mm. This seal replaces OEM numbers 25345, CAR25346, K965324, 83930308 (Item #: 182908, Ref: K965324) $30.90

Power Steering Pump - For Case: 1290 SN# 11050001 and up, 1390 SN# 11120001 and up, 1490. For David Brown: 990, 995, 996, 1210, 1212, 1290 SN# 11050001 and up, 1390 SN# 11120001 and up, 1410, 1412. Power steering pump with reservoir and internal breather. David Brown indicates it is necessary on some models to install additional parts for update. (Item #: 157637, Ref: K957318) $476.00

Seal Kit, Power Steering - Side mounted steering cylinder. For tractor models 885, 990, 995, 996, 1200, 1210, 1212 all with hydrostatic steering. (Item #: 182887, Ref: K962555) $30.97

Spindle - This Spindle is for tractor models 885 Without Brake Flange 885 and 885G Quiet and Deluxe Cab, 990, 995, 996 All Orchards, 1190 Late Model, 1290 and 1390 Low Profile Specials, 1194 SN# 11480680-Up, 1294 Low Clearance SN# 11491146, 1394 Low Clearance SN# 11504412-Up. Left or right hand. Shaft: diameter 1.374 inches, length 7.25 inches. (Note: If replacing K961781 Spindle, you will also need LM29710 cup, and LM29749 cone). The wheel bearing kit used for this spindle is part number WBKCA7. (Item #: 100312, Ref: K262207) $237.00

Spindle Repair Kit - For one spindle. For tractor models 880, 885, 990, 995, 996, 1190, 1194, 1290, 1294, 1390, 1394. (Item #: 179668, Ref: S.57863) $47.30

Spindle Repair Kit - For LH and RH Spindles. For tractor models 880, 885, 990, 995, 996, 1190, 1194, 1290, 1294, 1390, 1394. (Item #: 179097, Ref: S.17617) $90.00

Steering Column Adjustable Ball Race - Used on Case / David Brown models 1210, 1212, 880, 880 Implematic, 885, 990, 995, 996 this part replaces K903463 (Item #: 173340, Ref: 1850033M1) $20.50

Steering Column Lower Bearing - Used on Case / David Brown models 1210, 1212, 880, 880 Implematic, 885, 990, 995, 996, this bearing measures 0.845 inches inside diameter, 1.370 inches outside diameter, and 0.453 inches wide. Replaces OEM number 1850031M1, K903461 (Item #: 173343, Ref: 1850031M1) $9.50

Steering Column Repair Kit, Upper - For tractor models 885, 990, 995, 996, 1210, 1212. (Item #: 179637, Ref: K626671) $21.20

Steering Shaft - 24-1/2" long. For tractor models (880 selectamatic SN# 530001 and up), (880 implematic live drive), 880, 990, 995, 996. (Item #: 168860, Ref: K912411) $179.00

Tie Rod End - For 880 and 990 Implematic, 770, 780, 880, 1200, All Selectomatic, 1190, Fits either LH or RH side. Improved, Sealed Fitting - NO Zerk Fitting. Dimension A= 3-3/4", Dimension B= 3/4" (20NF RH thread). Fits 1290, 1390, 1490, 1194, 1294, 1394, MI394, 885, 990, 995, 996, 1210, 1212, 885, 885N, 380CK, 380CK, 380RR. (Item #: 104466, Ref: K908071) $20.40

Tie Rod End - This Tie Rod End is used on Carraro MFWD front ends. It measures 3.75 inches from the center of the ball joint to the end of the shaft. It has M22 x 1.5 Right Hand Thread. Replaces K965270, CAR98854, 98854, 48084970, 83930053, 80691 (Item #: 104470) $42.80

Tie Rod End - Has 18NF-RH Thread (female)socket for tie rod. Dimension A= 3-1/8 inch, Dimension B= 7/8 inch For tractor models 1200 Selectomatic, 885, 990, 995, 996, 1210, 1212, 885, 885N, 380CK, 380RR. (Item #: 104467, Ref: K929057) $23.30

Tie Rod End - Left Hand - This Tie Rod End is used on Carraro MFWD front ends. It measures 3.75 inches from the center of the ball joint to the end of the shaft. It has M22 x 1.5 Left Hand Thread. 83930054, CAR98855, K965269, 48084969, 80694, 98855 (Item #: 104471) $82.57

Tie Rods - Ball Socket for Power Steering Cylinder. 3/4 inch RH threads, 2-1/2 inches long. For tractor models 1190, 1194, 1200 David Brown, 1210 David Brown, 1212 David Brown, 1290, 1290 David Brown, 1294, 1294 David Brown, 1390, 1390 Skid Steer, 1394, 1490, 885, 990, 995, 996. Replaces K262849, K207721, K262850, K923766, K204347 (Item #: 104464, Ref: K207721) $24.04

Tie Rods - Ball End. For tractor models 1190, 1194, 1200, 1210, 1212, 1290, 1294, 1390, 1394, 1410, 1412, 1490, 1494, 1594, 1690, 990, 995, 996.3.780 inch, .750 inch, 20 NF RH Thread. Replaces K207722, K262852, K915962 (Item #: 104465, Ref: K207722) $27.10

Universal Joint - The measurements on this Universal Joint are 27mm cup diameter and 82mm across. Side greaser included. This Universal Joint is used on Carraro 4WD front axles. Replaces OEM numbers CAR96867, CAR116859, 3230277R1, 3216550R91, 137700420834, 1967554C1, 84512487, NH80715, 9961774, 9962244, 87760752, K965331, CAR041121, CAR116859, 83934724, 81927841, ZP1927504, ZP1927841, 3230277R1, 84512487, 83957857, AL32885, 137700000000, 3475808M91, 3475808M1, 3427352M91, 1895699M1 (Item #: 156129, Ref: CAR96867) $37.10

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: A22279, A30834, A42242, G45307, K964615, O10582AB, K902187, K960750 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.20

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.70

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $15.10

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $9.10

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $8.70

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 996 Parts] [All Case Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy