FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Case 1394 Parts

Category: Steering

[Categories] [All 1394 Parts] [All Case Models]

Axle Fork and Shaft, Outer - Carraro 4WD front ends on Case / David Brown models 1394, 1494, 1594. This part replaces 83952526, CAR40760, N13510 (Item #: 156151, Ref: CAR40760) $250.00

Axle Shaft Assembly - Replacing OEM numbers K965336, K395088, 84355315, 21.00.00, 83957852, CAR118613, this is a complete assembly with U-Joint. Used on Carraro 4WD front ends. Overall Length: 923mm (36.3386 inches). (Item #: 156148, Ref: CAR118613) $969.00

Axle Support Bushing - Used on Carraro 4WD front ends, this bushing measures 4.921 inches outside diameter, 4.527 inches inside diameter and is 1.653 inches long. Replaces OEM numbers K965756, K965265, 1-33-241-048, 9967992, K965265, CAR101575/1, CAR123477, CAR1015751, 9967992, 83930079, 83930554, R113767, 3541395M1 (Item #: 156131, Ref: CAR1015751) $91.21

Front Axle - Differential Housing Bushing - The measurements on this bushing are: 4.525 inches outside diameter, 4.127 inches inside diameter, 1.730 inches long. This bushing is used on Carraro 4WD front end. Replaces OEM numbers 101565, K965266, CAR1015651, 83945601, CAR101565/1, CAR123478, 83930062, 9967993, R113766, 3541396M1, 040953R1 (Item #: 156132, Ref: CAR1015651) $79.00

Front Axle O-Ring - Many Carraro 4WD front axle equipped use this o-ring at the front of the pivot assembly. This part replaces OEM numbers 83957130, 83959520, CAR28556, N805193S91, 85807958, K965267, 28103 (Item #: 156146, Ref: CAR28556) $1.20

Front Axle Oil Seal - Used on some Carraro 4WD front ends, the seal replaces OEM numbers 153326217, 5122548, 5105932, CAR115715, 83944350, K262811, K395039, EQ501510 (Item #: 156134, Ref: CAR115715) $9.64

Front Axle Thrust Washer - Used in some Carraro Mechanical Four Wheel Drive front axles, this part replaces CAR115776, 47109296, CAR123478, 83944351, 9967994, K395022 (Item #: 156133, Ref: CAR115776) $31.70

Front Spindle - Verticle shaft measures 18.125 length and diameter of 1.374. Spindle For tractor models 880A and 880B Selectomatic, 990, 995, 996 All High Clearance, 990 A and B Selectomatic High Clearance, 990, 995, 996 Quiet and Deluxe Cab High Clearance 52-76 inch Tread, 1290, 1390, (1294 SN# 114911460, (1394 SN# 11504412 and up) All High Clearance. (Item #: 100314, Ref: K262211) $185.00

Half Shaft Bushing - Many Carraro Mechanical Four Wheel Drive front axles use this inner half shaft bearing. This part replaces OEM numbers 09968000, 9968000, 87313791, 83952334, CAR118547, K395019 (Item #: 156140, Ref: CAR118547) $11.02

Half Shaft Inner Seal - The measurements on this seal are: 62mm outside diameter, 42mm inside diameter, 14mm wide. This seal is used on the inner portion of a half shaft on Carraro front axles. Replaces OEM numbers 9968001, 73403999, CAR116723, 83952335, 1966164C1, 09968001, 3475332M1, KH1213, VKH1213 (Item #: 129289, Ref: CAR116723) $12.10

Hub Bearing Kit, Front - Early parallel spindles. Contains OEM part numbers for the bearings of 255802552 and 19150. Contains seal measuring 2.75 inches inside diameter, 3.75 inches outside diameter and 1/2 inch width. For tractor models 880, 885, 950, 990, 995, 996, 1190, 1290, 1390, (1194 up to SN# 11480679), (1294 up to SN# 11491145), (1394 up to SN# 11504411), 1190, 1290, 1390, 1194, 1294, 1394. (Item #: 104394, Ref: K962986) $146.00

Hub Bearing Kit, Front - For tractor models (1194 SN# 11480680 and up), (1294 SN# 11491146 and up), (1394 SN# 11504412 and up). (Item #: 104395, Ref: K262214) $23.70

Hub Bearing, Inner - Used on Case / David Brown models 1290, 1390, 1394, 1490, 1494, 990, 995, 996 with mechanical four wheel drive. This Bearing replaces 25745, K965321, 81864405, CAR25745, 3140669R91 (Item #: 180505, Ref: K965321) $81.00

Hub Inner Seal - The measurements on this seal are 1.575 inches inside diameter, 2.169 inches outside diameter, and 0.315 inches thick. It is used in the hub of Carraro 4WD front axles. This part replaces 6190246M1, 118675, 1967605C1, CAR118675, 82848086, 3946626, 83946626, 83937304, 85807964, 83930043, 96839, 47110069, N8897, K260142, K205152, K965236, 1-33-741-636, 3541488M1, 3426192M1, 3019957X1 (Item #: 104714, Ref: CAR118675) $9.40

Hub Seal - Used on Mechanical Four Wheel Drive Case/ David Brown models: 1394 up to serial number 11503000, 1494 up to serial number 11518000, 2094, 3294. Measures 145mm inside diameter x 170mm outside diameter x 16mm wide. (Item #: 179424, Ref: N8898) $70.00

Hub Seal, MFWD - Extensively used on Carraro mechanical four wheel drive front axles, this hub seal measures 149mm (5.86614 inches) x 176mm (5.86614 inches) x 16mm (0.629921 inches). Replaces OEM numbers 9968085, K395102, 47108806, 83996064, 82920209, 294169A1, 247877A1, 130182A1, 1349265C1, CAR126324, CAR47705, 3225110, 0003225110, 82920209, 3996064, 83996064, 83957862, 9968085, 153326219, 153326621, 1349265C1, 153326301, 09968085, 83952509, 83952530, CAR118556, CAR126324, CAR47705, CAR126390, 3501510M1, 3475598M1, 3475533M1, 3523062M1, 3541510M1 (Item #: 157753, Ref: 247877A1) $56.00

Hub Seal, Primary Four Wheel Drive - Used on four wheel drive front axles on Case / David Brown models 990, 995, 996, 1290, 1390, (1394 up to serial number 11503000 Axle serial number to DB13V349), 1490, (1194 up to serial number 1151800, Axel serial number to DB14/1440), 2094, 2290. This part replaces 102148, CAR102148, K965323, 83930064 (Item #: 182901, Ref: K965323) $149.00

Hub Seal, Secondary, Four Wheel Drive - Used on four wheel drive front axles on Case / David Brown models 990, 995, 996, 1290, 1390, (1394 up to serial number 11503000 Axle serial number to DB13V349), 1490, (1194 up to serial number 1151800, Axel serial number to DB14/1440), 2094, 2290. Measures 140 x 170 x 16mm. This seal replaces OEM numbers 25345, CAR25346, K965324, 83930308 (Item #: 182908, Ref: K965324) $30.90

King Pin - Mechanical Four Wheel Drive, Carraro front ends use these king pins at the hubs. This king pin replaces OEM part numbers CAR115729, K395035, 83957144 (Item #: 156166, Ref: CAR115729) $71.00

King Pin Thrust Bearing - Used on several Carraro 4WD front ends, this 2 piece bearing set replaces OEM numbers N14373, 47109506, 3523057M1, 47895578, 123726, 137700410834, 153326668, 1964243C1, 14373, 83982416, 83944349, 87523063, K395040, 87521218, 47123701, 9968002, CAR123726, CAR115714, 3541402M1, 3475530M1, 3523057M1, EQ501557, ER123726 (Item #: 156136, Ref: CAR123726) $24.40

Power Steering Motor - For Case tractor models 885, 990, 995, 1194, 1210, 1290, 1294, 1394, 1410, 1490, 1494, 1594, 1690, Compatible with Case IH tractor models 885, 995, 1190, Replaces Case IH OEM number K946083, Without pressure relief valve, Will not accept original hose fittings, For a Remanufactured version of this sku use Item #: 204626, (Item #: 168942) $497.00

Power Steering Pump - Dynamatic, Case, K207625 - For Case tractor models 1294 (1/83-12/85), 1394 (2WD (1/83-12/87), Replaces Case OEM number K207625, With diesel engines, Genuine Dynamatic pump, Manufactured to exact OEM specifications, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 157796) $460.00

Spindle - This Spindle is for tractor models 885 Without Brake Flange 885 and 885G Quiet and Deluxe Cab, 990, 995, 996 All Orchards, 1190 Late Model, 1290 and 1390 Low Profile Specials, 1194 SN# 11480680-Up, 1294 Low Clearance SN# 11491146, 1394 Low Clearance SN# 11504412-Up. Left or right hand. Shaft: diameter 1.374 inches, length 7.25 inches. (Note: If replacing K961781 Spindle, you will also need LM29710 cup, and LM29749 cone). The wheel bearing kit used for this spindle is part number WBKCA7. (Item #: 100312, Ref: K262207) $237.00

Spindle Repair Kit - For one spindle. For tractor models 880, 885, 990, 995, 996, 1190, 1194, 1290, 1294, 1390, 1394. (Item #: 179668, Ref: S.57863) $47.30

Spindle Repair Kit - For LH and RH Spindles. For tractor models 880, 885, 990, 995, 996, 1190, 1194, 1290, 1294, 1390, 1394. (Item #: 179097, Ref: S.17617) $90.00

Steering Arm - This is a Left Hand Steering Arm for 1190, 1194, 1290, 1294, 1390, 1394 Tractors. It replaces K200597 (Item #: 113279, Ref: K200597) $223.00

Steering Motor, Hydraulic - Orbitrol Steering Motor has 12 spline, for 2 Wheel Drive, 100CC, 3/4 JIC. For tractor models 1194, 1294, 1394, 1494, 1594. (Item #: 159059, Ref: K207419) $470.65

Tie Rod End - A= 2.190", B= .687", 18 RH thread. For tractor models 1394, 480B, 480C, 480CK, 480D, (480LL with std or long axles and std wheel based), 530CK, 580B, 580C, 580CK, 580D, 580F, 584E, 585D, 585E, 586E, (760, 860 trenchers). Replaces A40962, D120800, E42039 (Item #: 100326, Ref: A40962) $13.10

Tie Rod End - For 880 and 990 Implematic, 770, 780, 880, 1200, All Selectomatic, 1190, Fits either LH or RH side. Improved, Sealed Fitting - NO Zerk Fitting. Dimension A= 3-3/4", Dimension B= 3/4" (20NF RH thread). Fits 1290, 1390, 1490, 1194, 1294, 1394, MI394, 885, 990, 995, 996, 1210, 1212, 885, 885N, 380CK, 380CK, 380RR. (Item #: 104466, Ref: K908071) $20.40

Tie Rod End - Used on Case / David Brown models with 4WD: 1390, 1394, 1494, 1594, 1690, 1690 Turbo, 1694 480B, 480C, 480D, 480E, 580, 580 Super D, 580B, 580C, 580D, 580E, 580F, 580G, 580SE, 584D, 584E, 584FL, 585D, 585E, 586D, 586E, 586FL. This tie rod end measures 105mm from the center of the ball joint to the end of the threads. The rod has M24 x 1.5 Left Hand threads. Replaces K956936, K262981, K88482, K262887, K260250 (Item #: 104473, Ref: K88482) $33.00

Tie Rods - Ball Socket for Power Steering Cylinder. 3/4 inch RH threads, 2-1/2 inches long. For tractor models 1190, 1194, 1200 David Brown, 1210 David Brown, 1212 David Brown, 1290, 1290 David Brown, 1294, 1294 David Brown, 1390, 1390 Skid Steer, 1394, 1490, 885, 990, 995, 996. Replaces K262849, K207721, K262850, K923766, K204347 (Item #: 104464, Ref: K207721) $24.04

Tie Rods - Ball End. For tractor models 1190, 1194, 1200, 1210, 1212, 1290, 1294, 1390, 1394, 1410, 1412, 1490, 1494, 1594, 1690, 990, 995, 996.3.780 inch, .750 inch, 20 NF RH Thread. Replaces K207722, K262852, K915962 (Item #: 104465, Ref: K207722) $27.10

Universal Joint - Used between the two halves of an axle assembly on Carraro MFWD front ends, this universal joint has 27mm cup diameter and is 74.60mm across. Replaces OEM numbers 107625, 83930383, CAR107625, 84355315, 21.00.00, K262161 (Item #: 156164, Ref: CAR107625) $45.30

Universal Joint - The measurements on this Universal Joint are 27mm cup diameter and 82mm across. Side greaser included. This Universal Joint is used on Carraro 4WD front axles. Replaces OEM numbers CAR96867, CAR116859, 3230277R1, 3216550R91, 137700420834, 1967554C1, 84512487, NH80715, 9961774, 9962244, 87760752, K965331, CAR041121, CAR116859, 83934724, 81927841, ZP1927504, ZP1927841, 3230277R1, 84512487, 83957857, AL32885, 137700000000, 3475808M91, 3475808M1, 3427352M91, 1895699M1 (Item #: 156129, Ref: CAR96867) $37.10

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: A22279, A30834, A42242, G45307, K964615, O10582AB, K902187, K960750 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.20

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.70

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $15.10

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $9.10

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $8.70

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 1394 Parts] [All Case Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy