Comments for When%20Push%20Comes%20To%20Shove|
Add to these Comments
Farmer Bob wrote on Friday, June 30, 2000 (PDT):Great article! I'd give you an "A" in that school of hard knocks. It is truly amazing how ideas become reality once the right folks can get togther and make it happen. Looking forward to the next article.
David Dunlap wrote on Monday, July 03, 2000 (PDT):Fun story. Thanks for sharing it. I would love to hear about your WD 45 restoration project.
Matt Clark wrote on Thursday, July 06, 2000 (PDT):I'm always interested in somebody else's projects. Although I don't have the need (or the cash!!) to tackle something as big as your project, I build a three point mounted tree planting unit this spring. What a project!! Let us see your next unit!!
Fargo wrote on Thursday, July 06, 2000 (PDT):Great job! Thanks for taking out the time to show us!
Jim Pearson wrote on Thursday, July 06, 2000 (PDT):Good article...but I would add one thing to lower the force placed on the blade. Here in Lincoln NE we contract with the city to do residential snowplowing and the 10ft. blade on my 1206 has a V shaped angle iron that goes back from the low point of the frame to the where the draw bar hooks on under the axle. We push snow where no truck dares to go.
Ryan wrote on Monday, July 10, 2000 (PDT):Really enjoyed your article. Hope you will do another on the A/C. The pictures really made the piece work the best.
Wes Schmidt wrote on Sunday, July 16, 2000 (PDT):Real interesting, I would like to see this tractor working and an article on your next one.
Paul wrote on Thursday, July 27, 2000 (PDT):I really enjoyed your project and the pictures helped explain the steps to the process. Definiately write about the WD45! Thanks
Jon Klasna wrote on Thursday, August 03, 2000 (PDT):Great Story! Reminds of some of the things I had to do as a mechanic/truck driver for a couple of Implement dealers I used to work for!! guess I'll have to write up a couple of them. Gosh, it's fun to fabricate things like that!!!!
Katie Patterson wrote on Wednesday, April 11, 2001 (PDT):If anyone were to read this article listed above, it is with deep regret that the man known to us as "Big Dog David Patterson" passed away last fall with cancer. His fight was nothing less that great. Just like this article you have read, Dave had a love for life and tractors. He showed me enormous love, as I was his wife "Katie". Enjoy this article as I'm sure you will. We all miss Dave very much, may his memories last forever!
Kirk J, Hoefer wrote on Sunday, September 28, 2003 (PDT):Dave, I appreciate yours & Dr. Johns step by step on the dozer blade. Watchn' folks fabricate has always interested me. Pop my granddad. always used to say "Imagine it in your head before you start. and get a FULL picture before you start your project. & he would put it on paper afterward just to make sure it didn't get shredded (or lost) and he didn't have any college experience. I've done the same thing and it is truly amazing how the project comes out. as I'm sure you would agree. Thanks loads for that note and look foreward to more of yours & Dr. John's adventures. Kirk
Fred wrote on Tuesday, December 09, 2003 (PST):OUTSTANDING!!!
Logan in Texas wrote on Wednesday, May 05, 2004 (PDT):COOL, Tell/Show us more!
Phill S. wrote on Tuesday, November 09, 2004 (PST):Neat project, Dave! I'm restoring a 1954 Allis WD-45 also. It's cold here now and my garage stall is the only place I have to work on it, so I'm stalled until next spring. It would be fun to share with each other what we run into on the WD-45. I haven't taken very many pictures of the work in progress, but I've been into almost every nook and cranny of the tractor, so I can relay a fair amount of information. Had to make a few parts along the way, as well. Email me if you run into anything you have questions about. Phill Snartland firstname.lastname@example.org
Kansas.... wrote on Tuesday, November 09, 2004 (PST): I sure enjoyed reading it!!! Thanks...
Chuck Mulford wrote on Tuesday, November 09, 2004 (PST):Hey Dave, i really enjoyed your story, pics. I would love to see that beast in action !! Main thing just keep lovin those old tractors..
Len Bull in NC wrote on Monday, May 16, 2005 (PDT):The only thing missing is that the tractor and parts need to be painted green and yellow. Well written! LEN BULL
young puller wrote on Thursday, August 18, 2005 (PDT):Great Story! i'd love to see that beast in action. Thanks!!
Dr. Walt - Pahrump, Nevada wrote on Thursday, July 17, 2014 (PDT):May this article always serve as a MEMORIAL to Dave Patterson. My sincerest condolences and best wishes for his wife Katie and his family. Doc
Katie Patterson wrote on Wednesday, April 11, 2001 (PDT), If anyone were to read this article listed above, it is with deep regret that the man known to us as "Big Dog David Patterson" passed away last fall with cancer. His fight was nothing less that great. Just like this article you have read, Dave had a love for life and tractors. He showed me enormous love, as I was his wife "Katie". Enjoy this article as I'm sure you will. We all miss Dave very much, may his memories last forever!
|Fast Shipping! Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]|
| Copyright © 1997-2016 Yesterday's Tractor Co.|
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters