Posted by LaVern Skarzenski on May 21, 2013 at 17:59:59 from (72.92.209.190):
In Reply to: VAC 11 in the Garden posted by NickatKY on May 19, 2013 at 15:45:36:
If by flat platform you mean the floorboard, I think it looked just like the first picture. The cultivators were very similar to the second picture with the square tube for the Eagle hitch rear cultivator and front vs. the other one just on the back. But I think there was one small difference if my memory serves me well and that was the round actuating rods that propelled the front cultivators went under the rear axle instead of over as the second picture with the lower floor boards. And our VAC definitely had the raised seat like the first picture. I think there was a green casting that bolted to the lower side of the Eagle Hitch that extended down under the axles. I may be wrong, but it seems that I remember that from hooking the cultivators up enough times. It eventually got so my dad used only the rear tool bar and cultivated a few more times because we used the tractor for so many other things, and the 3ph was much easier to hook up and unhook. That's how I remember it any way. Thanks for all the great information.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Madison's County - by Anthony West. Philip Madison has been a good friend of mine for quite some time. He has patiently suffered my incessant chit chat on the subject of tractors for longer than I care to remember, and on many occasions he has put himself out, dropped what ever it was he was doing, to come and lend a hand cranking handles, or loading a find onto a trailer. Although he himself has never actually owned or restored a tractor, he was always enthusiastic and always around helping with other peoples projects.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.