Posted by Don Rudolph on January 17, 2013 at 10:07:24 from (99.188.18.125):
In Reply to: 400 super diesel posted by 4440 puller on January 17, 2013 at 08:51:05:
There are a couple of things different on a Super. As Tom said a Super will have a PTO brake and also on the steering column there is a "boss" for the eventual Case-O-Matic lever on the 800. It is on the left side of the casting and is a flat spot that would be drilled and threaded if the column was used for COM. On the Super it is not drilled or threaded, but you can see how it would work. Also the block for a Super should be A1111, the same as a 700 or 800. I also believe the pump is set at 100 RPM higher than a regular 400. I need the experts to wheigh in on that. In addition the tool box is much bigger and does NOT have CASE stamped into the cover. That should give you enough clues to go by. I hope you have found one! Don
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Madison's County - by Anthony West. Philip Madison has been a good friend of mine for quite some time. He has patiently suffered my incessant chit chat on the subject of tractors for longer than I care to remember, and on many occasions he has put himself out, dropped what ever it was he was doing, to come and lend a hand cranking handles, or loading a find onto a trailer. Although he himself has never actually owned or restored a tractor, he was always enthusiastic and always around helping with other peoples projects.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.