The tractor is currently at my father in laws so I can't take a look at it or take pics for a couple days. I have a service manual for the Model 22 loader and backhoe. The literature is consistent as far as how the backhoe and loader look but the manual says that they loader is run off of the hydro pump for the eagle hitch and the backhoe is run off of a pto driven hydro pump on the back of the machine. Both of these statements are wrong since the hydro pump is front mounted to the tractor. I will have to get a look and follow the piping to find where everything goes and in what order. So if they pressure line goes first to the loaders control valve that means that the main relief valve will be in that, if it goes to the backhoe control valve then that means that the main relief is back there? Also I just wanted to sum up that everyone seems to think that the reason for the cracked pump is that the main relief being set to high? After I put the replacement pump in I ran the loader up and down without issue, then I when to put the rear stabilizers up and when it hit the top of the stroke the engine stalled, I figured that the throttle was just to slow so I started it back up, moved the throttle up a bit and put the stabilizer all the way down and when it bottomed out is when the pump cracked. Thanks!
This post was edited by hondaracer2oo4 at 16:07:33 11/10/12.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - It Can't Be Done! - A Tractor Story - by Neil Campbell. I'll never forget the time back when I was a boy baling hay on our Farm in Big Rapid, Michigan. The most memorable event that took place was a trip up the steepest incline on the farm pulling an old New-Idea baler with a pony-motor for power and a haywagon. I had just talked my Dad into buying an old John Deere B with 6-speeds ahead and I was real proud of it, except it was a little smaller than the Case tractor that we normally
... [Read Article]
Latest Ad:
Rebuilt Injection pump for J D 1010. Call or text for pictures or more imformation.free shipping.U.S. No core charge
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.