Recollections of a John Deere GP
by Charlie Cook
I grew up on my dad's 280 acre general farm in Western Michigan. Dad's
only tractor when I was very young was the old GP. My first recollection
of this tractor was when dad allowed my brother and myself to ride on
the tractor with him driving. One of us would sit on the left fender
(away from the clutch) and other would sit on the gas tank and hold onto
the crankcase breather pipe.

|
When I was 10 or 11 I learned to drive the tractor. I could not push the
clutch in and make it stay so dad would push in for me and then jump
back onto a hay wagon with a hired man and stack hay as it came off a
hay loader which was attached to the back of the wagon. At about 13 or
14 I graduated to working the fields with a disk or drag and a
cultipacker. At 15 I again progressed to plowing. That was a job that
was easy for the old GP because of it's wide front wheels. All I needed
to do was set one wheel in the dead furrow and it would drive itself
until the end of the field and then I would turn it around and head back
the other way. It was so easy in fact that I fell asleep once and plowed
my way through a barbed wire fence and into the next field. Dad was not
pleased.
The above was all over 50 years ago but I never forgot the old GP. Dad
acquired an A and a B during the war but my favorite was still the old
GP. After high school I left the farm to pursue a career in the
construction industry where I spent the next 40+ years. I decided about
2 or 3 years ago that if I ever found another tractor like the old GP
would try to buy it. In the spring of "98" I started looking seriously.
I traveled the entire state of Michigan and could not find on like the
old one that I grew up with. Then a miracle happened. I attended a steam
and gas tractor show about 10 miles from home and a guy there was
passing out flyers for an auction that included part of his collection
of antique tractors of all makes and models.
Low and behold there was a
GP listed. He had all the tractors hid and did not allow anyone to see
them before the day of the sale. When I arrived I could hear the
familiar sound of a John Deere popping away at the other end of the
field. I was like a kid in a candy store. When the auctioneer got to the
old JD the bidding was started way above what I had hoped I could get it
for. I did notice that almost no one else was bidding so I held back
too. The price dropped until someone jumped in and then it went back up
again. It rose to the point that I did not think that I could really
justify paying that much. I was sick. Here I had this machine in the
palm of my hand and it got away.
About 3 weeks later my wife and I attended another tractor show and I
started my search again. We were walking through around on the grounds
looking at all the nice old antique tractors and I spotted the guy who
had the sale so I struck up a conversation with him. I told him that I
had kicked myself for the last 3 weeks because I had let that old GP get
away from me. I was about to walk away from him and he asked me if I was
still interested. I told him I was. He then informed me that he had the
old GP bid back in because he really thought it was worth more. He said
the property where the tractor was stored had just been sold and he had
to get rid of some more tractors. I made him and offer which he said he
had to think about. A week later he called back and made me a counter
offer. We went back and forth for about another 2 weeks and he finally
called and said that I could have it. I was delighted.
Since getting it I have discovered that there were some problems with
it. It had a backfire problem which was caused by sticking valves. The
carburetor needed work and I ended up disassembling that and putting in
a new valve and seat. The gas shut off leaked so I replaced it and in
the process discovered that the gas tank was rusted in a couple of
spots. I removed it and relined it. The magneto cover was cracked in
several places so I replaced it along with new plugs and wires. The
brakes were almost non existent so they have been relined. The front
wheels were not properly lined up so I redid those. My last project was
to try to correct an oil leak. I traced it to the belt pulley and have
taken that apart and cleaned it and replaced an oil seal which it turned
out was not the problem. The oil was coming from an improperly set soft
plug. I put that in correctly and that took care of the oil leak.
I will be showing the tractor at several local shows this summer and
also a couple of parades. I am enjoying this old tractor and even though
I probably paid a little more than I should have I am happy to have it.
Right now I would not sell it for twice what I paid for it.
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|