Allis Chalmers Discussion Board |
Re: WD45 pull a 3 bottom plow?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Texas Denny on March 09, 2005 at 14:26:26 from (66.68.15.150):
In Reply to: WD45 pull a 3 bottom plow? posted by Bones Magoo on March 09, 2005 at 08:34:59:
I think it has been pointed out adequately. With a three point conversion, there will be no traction booster. We had a neighbor when I was a kid who had a WD-45 gas that he used with an Oliver 3-16 pull type plow. He pulled in second gear and had no problems. Since he used a pull type, there wasn't much traction booster there either. However, the hitch angle added a lot of traction to the rear. Your soil might be tougher than southern Minnesota black or it might be lighter. Give it a try. I do believe you'd be better off with an Allis snap coupler plow or a pull type than a three point conversion type setup. But, it might work. Won't know till you try it.
Follow Ups:
Home
| Forums
Today's Featured Article -
Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
Latest Ad:
Super WD9.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|