Posted by Longmeadow Farm on March 27, 2013 at 15:01:54 from (72.224.6.238):
In Reply to: 6080 allis chalmers posted by gerald micek on March 26, 2013 at 13:01:53:
You better get to the external thrust adjustment before you need.. first rods and second a crank. Your AGCO dealer has the "instructions", including the shims and proper calibration. I bought a 6080 a few years back. It had problems going into neutral on a slight grade..with the nose up. I could move the front pulley..back and forth quite a bit. My out of adjustment was just shy of needing new rods... re-shimmed to factory spec, with shims from AGCO, and now the 6080 shifts easily and in all situations. If your AGCO Dealer balks at your request, call Sandy Lake Equipment.. north of Pittsburg.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Modern Diesel Fuel in an Old Tractor - by Staff. This interestin discussion is from the Tractor Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Rebuilt Injection pump for J D 1010. Call or text for pictures or more imformation.free shipping.U.S. No core charge
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.