Steve - I appreciate the suggestion; seems time is tighter than money but neither are "loose" (wife, baby, & broken down tractors to support) so I suppose no, I don"t have much to lose. But...I don"t have any dire need for the tractor as of right now so I"m not entirely afraid of a tear down; I already stripped the electrical components off so I could power wash 30 years of accumulated gunk off and the brakes are broken as well so I anticipate an over-winter project as is. I guess I am thinking I will use the bars leak as a radiator fix if possible but I would like to pursue a more permanent fix for the oil contamination problem. Seems that if I accumulated 2 cups or so of coolant in the oil pan in a few minutes of run time and pressure testing combined that the leak may be too severe for a bars leak type fix? Again, I"m new to this tractor fixing business...Thanks for the advice! Regards
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.