FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Harris Pacer Tractor Parts

[Categories] [All Massey Harris Models] [Print]

Clutch

Pilot Bushing - This is a Bushing, not a bearing. Please verify before ordering. Measures 0.815 Inch Outside Diameter, 0.625 Inch Inside diameter, and 1.000 Long. Serviceable for part numbers: 15280A, 15LG202. You may have to shorten to 0.895 inches. (Item #: 155743, Ref: 251266R1) $5.90

Pressure Plate Assembly - For tractor models Pony and Pacer. Pressure Plate Assembly: 6 1-2, 3 Spring, New Cast Plate. (Item #: 122626, Ref: 1500362M92) $89.00

Release Bearing - This new Release Bearing fits Pacer serial number 51613 and up (1955 and up), and Pony serial number 24090 and up (1955 and up). It replaces original part number 354330X1. The inside diameter is 1.5 inches. (Item #: 114297, Ref: 70800041) $40.10

Release Bearing, Sealed - For tractor models MH30, Pony, Pacer. Bearing is used with a 11" clutch plate. 3 Inch outside diameter, 1 3/4 inch inside diameter, 3/4 inch wide. (Item #: 107880, Ref: N1136) $43.60

Decals and Emblems

Decal Set - For Pacer. Set of 8 self adhesive decals. These are printed on Mylar, not die cut. (Item #: 102651, Ref: R1357) $31.40

Drive Train

Ball, Shift Lever - 3/8" UNF threads, replaces 765961M1. For tractor models Pony, Pacer, Colt, Challenger, Mustang, MH20, MH22, MH30, MH33, MH333, MH44, MH444, MH55, MH555, MH81, MH82, MH98, MH101JR. (Item #: 110012, Ref: BB7213A) $4.30

Electrical System

Distributor Rotor Button - This Rotor Button Fits AUTOLITE distributors with 3-3/8 inch outside diameter, clip held cap, including distributors: IAD-4010-A, IAD-4010-C, IAD-4020A, IAD-4020B, IAD-4023, IAD-4028-A, IAD-4043, IAD-6001-1B, IAD-6003-1A, IAD-6003-1B, IAD-6003-2A, IAD-6003-2F, IAD-6003-2J, IAD-6003-2K, IAD-6004-1C, IAD-6004-1D, IAD-6004-1E, IAD-6004-2D, IAD-6004-2E, IAD-6004-2G, IAD-6004-2H, IAD-6010-1. Note, it does not fit IGZ or IGW distributors. Replaces IG-1657R, IGS-1016B, A20416, A8369, IG1657R, T-7691, T7691, TGO-7746, TGO7746, 1500293M1, 1500293M91, 21A321, AV101088. (Item #: 112188, Ref: IG1657R) $7.00

Electronic Ignition Conversion Kit - 12 V Negative Ground - For Colt, Mustang, Pacer, Pony, 22, 23, 30, 33, 44, 55, 333, 444, 555. Pertronix Electronic Ignition Kit for 12V Negative Ground Systems Only using Autolite Distributors..Electronic ignition conversion kit. Replaces points and condenser with an electronic module. For use on 12 volt NEGATIVE ground system only. Never change points again. Easy to install. Increases spark plug life. Increases horsepower. Improves fuel economy. Solid-state electronics. MUST ALSO REPLACE CAP (Part # AL165) and ROTOR (Part # AL150) both available from an auto parts store. (Item #: 105088, Ref: 1541) $130.00

Electronic Ignition Conversion Kit, 12V, Negative Ground - For Massey Harris tractor models Colt, Mustang, Pacer, Pony, 22, 23, 30, 33, 44, 55, 333, 444, 555, Adaptive Dwell Control, Converts Prestolite IAD-6004, Designed for 4 Cyl Motors, (Item #: 183761) $204.00

Electronic Ignition Conversion Kit (6 Volt - Negative Ground) - For Colt, Mustang, Pacer, Pony, 22, 23, 30, 33, 44, 55, 333, 444, 555. Pertronix Electronic Ignition Kit for 6 Volt NEGATIVE Ground Systems ONLY using Autolite Distributors. Electronic Ignition Conversion Kit replaces points and condenser with an electronic module. Never change points again. Easy to install. Increases spark plug life. Increases horsepower. Improves fuel economy. Solid-state electronics. SPECIAL ORDER. DELIVERY TIME IS 2 TO 3 WEEKS. (Item #: 183756, Ref: 1541N6) $163.00

Electronic Ignition Conversion Kit (6 Volt - Positive Ground) - For Colt, Mustang, Pacer, Pony, 22, 23, 30, 33, 44, 55, 333, 444, 555. Pertronix Electronic Ignition Kit for 6 Volt POSITIVE Ground Systems ONLY using Autolite Distributors. Electronic Ignition Conversion Kit. Replaces points and condenser with an electronic module. Never change points again. Easy to install. Increases spark plug life. Increases horsepower. Improves fuel economy. Solid-state electronics. (Item #: 105089, Ref: 1541P6) $149.00

Generator Cutout - For 6 volt system on models: Pacer, Pony, 101 JR, 101 SR, 102 JR, 102 SR, 20, 22, 22K, 30, 30K, 44, 32. For use on the following generators: 1101357, 1101413, GGR4801, 1100517, 1100506, 1101401, 1101356, 1100508, 1101377, 1101385, 1100588, 1101371, 4804B5, 480R35, 4804-5. (Item #: 105283, Ref: 1500199M91) $22.60

Starter Drive - Starter drive. Fits Pony, Pacer, 21, 22, 23, 25, Colt, Mustang, 81, 82, 101, 102, Sr., Jr. Replaces OEM# MZ4146, MZ4146A, MZ4072, MZ4131. (Item #: 107059, Ref: 565549) $34.00

Starter Drive, Improved Style - This improved style starter drive is a positive ratchet style drive. For models Pony, Pacer, 21, 22, 23, 25, Colt, Mustang, 81, 82, 101, 102, 101JR, 101SR, 102JR, 102SR all OEM numbers MZ4146, MZ4146A, MZ4072, MZ4131. Ten tooth drive, counter clockwise rotation, Barrel Folo rubber cushion drive design, 15.9mm inside diameter, 39.6mm gear diameter, 95-109mm. (Item #: 112575, Ref: 565549-New) $37.30

Engine Gaskets

Crankshaft Seal, Rear - For Massey Harris model: Pacer. (Item #: 106077, Ref: 49910) $9.90

Engine Parts

Ring Gear, Flywheel - For Pony, Pacer, both with N-62 Continental Engine. Flywheel Ring Gear has 86 teeth. (Item #: 100079, Ref: 1500117M1) $74.00

Engine Rings

No
Picture
Ring Set - Complete set STD for Y-91 Continental engine in Pacer. (Item #: 128909, Ref: R2346R) $242.00

Exhaust System

No
Picture
Chrome Stack, Curved - Double wall. For tractor models Pony, Pacer. (Item #: 178560, Ref: R4892) $206.44

No
Picture
Chrome Stack, Straight - Double wall. For tractor models Pony, Pacer. (Item #: 178564, Ref: R4891) $200.01

Manifold - This manifold fits the Massey Harris Pacer. It measures 10 3/4 inches from center to center on the outside holes, 14 3/4 inches in overall length, and 2 3/8 inches for the carburetor bolt spacing. Please note that the threaded holes and pipe threads measure 1 1/4 inches. Gasket, part number 1505086M1, sold separately. Replaces part number 1505085M1. (Item #: 185434, Ref: 1505085M1) $222.00

Manifold Gasket - Used when mounting 1505085M1 manifold. This gasket measures 10-3/4 inches center-to-center outside holes and 14-3/4 inches overall length. Measure before ordering. This gasket replaces OEM number 1505086M1. (Item #: 185435, Ref: 1505086M1) $13.30

Muffler - This Muffler is used on Massey Harris Pony and Pacer Tractors. The Inlet length is 5 inches Inlet inside Diameter is 1 inch, Shell length is 11-3/4 inches. Shell diameter 2-3/4 inches, Outlet length 5-1/4 inches, Outlet Outside Diameter 1-5/16 inches, Overall length: 22 inches. Replaces 850261M21 (Item #: 179573, Ref: 850261M21) $140.00

Fuel System / Air Intake

Adjustable Needle Assembly - 3/8 inch x 24 thread. Main Adjusting Needle. For Massey Harris tractor models: Pony, Pacer, 20, Colt, Mustang, 22, 30, 33, 44, 44 Special, 44-6, 50, 55, 81, 82, 101JR, 101SR, 102JR, 102SR, 201, 202, 203, 333, 444, 555, and 404 with one of the following Marvel carbs TSX181, TSX221, TSX245, TSX332, TSX374, TSX397, TSX413, TSX436, TSX505, TSX526, TSX530, TSX641, TSX662, TSX688, TSX689, TSX695, TSX756, TSX768, TSX769, TSX772, TSX774, TSX775, TSX777, TSX784, TSX792, TSX801, TSX811, TSX813, TSX816, TSX97. (Item #: 108463, Ref: C3NN9G504A) $27.80

Air Cleaner Cap - For tractor models Pony, Pacer. (Item #: 126369, Ref: 850404M2) $36.20

Carburetor Gasket Set - 5-piece gasket kit is for small bowl Marvel Schebler carburetors. The overall length of the bowl gasket is 4 5/16 inch. TO20, TE20, TO30, TO35, F35, F50, F135, F150, F202, F204, F40, MF35, MF50, MF135, MF150, MF202, MF204, MH101JR, MH22, MH30, MH50, MH81, Colt, Mustang, Pacer, MH20, MH22K, MH82, MH102JR .TSX155, TSX188, TSX248, TSX272, TSX28, TSX308, TSX309, TSX312, TSX34, TSX361, TSX361A, TSX447, TSX458, TSX541, TSX55, TSX605, TSX606, TSX643, TSX683, TSX88, TSX882, TSX94, TSXU828, TSXU829, TSXU831, TSXU832, TSXU834 (Item #: 182465, Ref: 9N9502) $4.60

Carburetor Kit, Basic - Kit for Marvel TSX155, TSX55, TSX28, TSX88, TSX188, TSX34, TSX308, TSX309, TSX541 carbs used on MH101, MH101JR, MH20, MH22, MH22K, MH30, Colt, Mustang, Pacer. (Item #: 100733, Ref: MS101) $18.00

Fuel Cap, Vented - Fuel Cap INTERNAL LOCK TANGS 2.7 inch OD, 1.78 inch overall tab length, 0.250 inch tab width. This silver cap is for models: Pony, Pacer, TE20, TO20, TO30, 35, F40, 50, 65, 85, 88, 90, 135, 150, 165, 175, 1080, 1100, 1130, 1150, 1500, 1800, 202, 203, 204, 205, 302, 304, 356, 2135, 3165. Replaces 850493M1, YTO 520948M91. Verify OEM number to ensure fit. (Item #: 184806) $10.30

Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166) $5.95

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number 180060M1. Gasket may be cork or rubber, depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.70

Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. For the following Massey Harris models: Pony, Pacer, 50 (gas). (Item #: 105382, Ref: 9N9162) $3.20

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: 12080G (Item #: 105364, Ref: 49923D) $3.50

Lights

No
Picture
Light Switch - For tractors with generator cutout, models Pacer, Pony, 101 JR, 101 SR, 102 JR, 102 SR, 20, 22, 22K, 30, 30K, 44, 32, 81, 82. Replaces 850449M1, 15199A, 827078M91. (Item #: 105312, Ref: 851674M1) $25.30

Oil System

Oil Filter - Measuring 4-3/16 inches in length, 3-15/32 inches outside diameter with a 0.525 center stud hole diameter, this cartridge type filter replaces OEM numbers 835817M91, 1014219M92, 1003879M91, 840751M91, 835817V91, 1014219M92, 15434A, 452050A, 761515M1, 8152AB, AT212, O8926AB, T16546, VT2427. Used in Continental Gas applications. (Item #: 111097, Ref: 835817M91) $11.00

Sheet Metal / Body Parts

No
Picture
Fender - Left Hand - For Massey Harris tractor models Pacer, Pony, Replaces Massey Harris OEM number 850764M12, Fits Left Hand Side, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 126482) $152.00

No
Picture
Fender - Right Hand - For Massey Harris tractor models Pacer, Pony, Replaces Massey Harris OEM number 850763M12, Fits Right Hand Side, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 126483) $152.00

No
Picture
Toolbox - For Pony, Pacer. Toolbox. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 179902, Ref: 850436M1) $31.80

Steering

Power Steering Pump Filter - Measures 1.02 inches inside diameter, 2.99 inches outside diameter, 1.61 inches height. For tractor models 11, Pony, 16, Pacer, 175, 180, 20, 202, 204, 2135, 2155, 2200, 230, 235, 245, 30, 302, 303, 304, 30B, 30D, 3165, 333, 35, 4500, 50, 50D, 555, 555D, 55D, 55G, 55K, 55LP, 65, 85, 88, Colt, FE35, FE35X, 50, Mustang, Pacemaker, TO30. VERIFY MEASUREMENTS of old filter. Replaces 1008553M1, 1052262M91, EP3, P183. (Item #: 111126, Ref: AE33538A) $13.20

Steering Wheel - 15" diameter, 11/16"-13/16" keyed, 3 steel spokes, stepped hub. For tractor models Pony, Pacer. (Item #: 101402, Ref: 850071M1) $45.90

Steering Wheel Nut - Zinc Plated Steel Nut, Steering Wheel Acorn Style. 5/8 - 18 NF thread. 1.132 inches tall. 1 inch wrench size. Replaces 207562, 70207562, 913133, 351103-S, 351103S, 751454R1, AL2315T, 195592M1 (Item #: 183746, Ref: 351103S) $9.00

Wheels

Front Rim - Fits Massey Harris Colt, Mustang, Pacer, Pony, 20, 22. 3 inch x 15 inch - 5 bolt. Additional $10 shipping due to weight and size. (Item #: 103753, Ref: R0089) $146.00

Front Wheel Weight - For Pony, Pacer, 20, Colt, 21, 22, Mustang, 23, 30, 81, 82, 101 Jr, 102 Jr, all with 3 inch x 15 inch 5 hole rims. J-Hooks are ordered separately as part number MHS038. (Item #: 182850, Ref: 850368M1) $155.00

Front Wheel Weight J-Hook - Used with Part number 850368M1. Includes hook, bolt and washer. Priced individually. 4 required per weight. (Item #: 179355, Ref: MHS038) $6.60

Rear Rim 8x24 - This 8 Inch x 24 Inch Rim has 4 loops. The loops are 14 inches center to center going around the rim, 20 inches center to center across the rim. Uses 5/8 inch bolts. The original bolts may not work. Used with 8.3-24 and 9.5-24 tires. Replaces part numbers 850091M1. Additional $15.00 Shipping Due To Weight. (Item #: 103715) $128.00

Rear Rim Bolt Kit - This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Verify measurements before ordering. Replaces: 180876M1, 353427X1. (Item #: 184824, Ref: 350719KIT) $23.00

No
Picture
Wheel Bolt - This wheel bolt kit fits the following tractor models: Mustang, Pacer, Pony, 101JR, 101SR, 102JR, 102SR, 20, 22, 30, 33, 333, 44, 44-6, 444, 44 Special, 81, and 82. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1 1/2 inches. Head size is 7/8. Replaces part numbers: 518611M91, 519278M91, and MP1584. (Item #: 108605, Ref: WB916) $2.20

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $385.00

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $97.00

Decals and Emblems

Ferguson Script Decal - 12 inches long, vinyl, blue and white. (Item #: 183045, Ref: R0735) $14.20

Ferguson Script Decal - 19 inches long, vinyl, green and chrome. (Item #: 178283, Ref: R0736) $25.80

Ferguson Script Decal - 26 inches long, vinyl, blue white. (Item #: 183046, Ref: R0737) $36.60

Massey Harris Trademark Decal - Red with yellow letters, 1-1/2 inches on vinyl. (Item #: 183092, Ref: R5190) $3.90

Massey Harris Trademark Decal - Yellow with red letters, 1-1/2 inches on vinyl. (Item #: 183072, Ref: R5191) $3.90

Massey Harris Trademark Decal - Red with yellow letters, 6 inches on vinyl. (Item #: 183101, Ref: R5192) $12.40

Massey Harris Trademark Decal - Yellow with red letters, 3/4 inch on vinyl. (Item #: 183066, Ref: R5236) $2.60

Massey Harris Trademark Decal - Red with yellow letters, 3/4 inch on vinyl. (Item #: 183098, Ref: R5237) $2.60

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $14.40

Alternator Pulley - Pulley, 3-1/8 inch diameter, 5/8 inch shaft bore, 2 grooves for 1/2 inch wide V-belt. (Item #: 179552, Ref: AP3158) $97.00

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Item #: BTW28) $35.98

No
Picture
Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Item #: BTW72) $53.81

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $49.20

Generator Cutout - Generator cutout for Autolite, 6-volt. For most MH models to 1951. (Item #: 105283, Ref: CB4014) $22.60

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $4.80

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Can fit several applications please verify OEM part before ordering. (Item #: 182636, Ref: 1871662) $93.58

Starter Drive - Drive assembly for Delco starters. Fits all MF diesel models Perkins gas models. (Item #: 111105, Ref: 1036519M91) $28.30

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $16.80

Starter Solenoid - Solenoid assembly, saddle mounting to starter. Services most late models, replaces Delco 1115510, on starters 1113139, 1113683, 1113676, others. 12-volt. (Item #: 105672, Ref: 1115510) $30.00

$Massey Harris Pacer Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $16.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.90

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $81.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $108.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $161.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $145.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Massey Harris Pacer Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $2.10

$Massey Harris Pacer Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Massey Harris Pacer Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.90

$Massey Harris Pacer Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $5.30

$Massey Harris Pacer Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.40

$Massey Harris Pacer Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.00

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.30

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $12.70

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $11.00

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $8.80

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $12.50

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.00

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $12.90

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.40

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $17.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.50

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $8.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $14.00

Carburetor Float, Zenith - This Float is used in the following Zenith Carburetors: 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993 (Item #: 108454, Ref: C85-103-S) $17.00

Fuel Line Sleeve, Pack of 10 - 7/16 inch outside diameter x 1/4 inch inside diameter x 1/4 inches wide. Replaces 33811113, 3637441M91, 376525X1, 3638466M91 (Item #: 158879, Ref: 376525X1) $4.10

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.92

$Massey Harris Pacer Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.30

Throttle Linkage - Universal. Adjustable length ranges from 6 3/8 to 6 5/8. Rod can be cut and either re-bent or re-threaded if a shorter length is required. (Item #: 173108, Ref: 1876343M92) $14.60

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $63.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $42.30

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Bracket Stabilizer - Bracket, used with telescoping stabilizer 539881M2TSK. (Item #: 178304, Ref: 514992M2) $46.00

Drawbar - Drawbar, category I, 7/8 inch pins. 11 holes, 26 inch bar length. (Item #: 103174, Ref: 180485M1) $42.10

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.40

No
Picture
Level Box Assembly - Leveling Box Assembly, standard right hand, category I, 20-1/2" closed, 26" open. Contains fork, shaft, pinion (185220M1-10-1/2"), housing, gear, bearing, handle and hardware. Replaces 677061, 1884760M94. Services all catergory I standard models. (Item #: 110256, Ref: HLBMF61) $70.00

Top Link Assembly, OEM Style - Category 1-1, 17-1/4 inch length of center tube. Verify size before ordering. Replaces 1870075M9. (Item #: 182641, Ref: 184134M91) $90.00

Top Link Assembly, OEM Style - Category 1-1, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 184078M91, 1869954M91. (Item #: 182642, Ref: 1690177M91) $68.00

Top Link Assembly, OEM Style - Category 1-1, 21-1/2 inch length of center tube. Verify size before ordering. (Item #: 182643, Ref: 184361M91) $89.00

Top Link Assembly, OEM Style - Category 1-2, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 3597172M91, 894376M1, 894376M91. (Item #: 182645, Ref: 194376M91) $90.30

Top Link Assembly, OEM Style - Category 1-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 894377M91, 894 377M91, 894377M1 (Item #: 170303, Ref: 894377M1) $90.00

Top Link Assembly, OEM Style - Category 2-2, 18-3/4 inch Length of center tube. (Item #: 182650, Ref: 893438M91) $81.00

Top Link Assembly, OEM Style - Category 2-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 3147681M91, 893439M91. (Item #: 184676, Ref: 1887285M91) $60.00

Top Link, Cat I and Cat II - Top link, 16 inch body combination Category II tractor and Category I implement ends, Adjust 19-1/2 inches to 29-1/2 inches overall. May or may NOT come painted red. (Item #: 112122, Ref: JSA1200R) $29.20

Top Link, Cat II - Top link, 24 inch body, 1 inch Category II ball joints. Adjusts 29 inches to 41 inches. Color varies depending on availability. (Item #: 182649, Ref: JSA2024R) $89.00

Top Link, Cat II, Red - Top link, 20 inch body, 1 inch category II ball joints. Adjusts 25 inches to 37 inches. (Item #: 184552, Ref: 30108E91) $77.00

Top Link, Cat I, Red - Top link, 24 inch body, 3/4 inch category I ball joints. Adjusts 29 inches to 39 inches overall. Painted red. (Item #: 182651, Ref: JSA1024R) $76.00

Top Link, Hydraulic - Category I (3/4 inch), 18.5" inches to 26.0 inches length, 2.00 inch cylinder bore, 9/16 inch UNF port size. (Item #: 183653, Ref: B8106) $257.00

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Clamp, Double Break-Away, Hydraulic - For use with S20-4 and S40-4 Couplers. Quik-Cover Assembly HV4957 fits this Clamp. (Item #: 112480, Ref: S42-4) $24.60

Coupler Flange - Optional drive flange for L601-9; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch spacing. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b. (Item #: 108772, Ref: L36-6) $64.00

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.40

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.10

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $21.10

Hydraulic Selector, isolator assembly - For tractors without individual external hydraulic systems. Three position spool, forward position allows one-way (push) for single acting cylinder. Center position allows operation of the 3-point arms and the rear position will feed power to a 4 way control valve for two way (push-pull) operation of double acting cylinder. Fits all MF tractors where 182373M1 lift cover is used. Replace MF cover plate, adds 2 I/O ports 3/8 inch NPT. (Item #: 185644, Ref: TS300) $140.00

Hydraulic Valve Kit, External, Single Spool - Converts tractor for operation of cylinders on pull type implements, front loaders, hydraulic motors, or other optional hydraulics. Single spool, double acting control valve mounts conveniently on flat or shell fenders. Selector/isolator allows operation of single or double acting cylinders. Mounting hardware and instructions included. Kit contains single spool, double acting control valve, isolator valve, valve couplers, clamp hoses, adaptors, hardware and instructions. For tractor models TO35 and later where 182373M1 lift cover plate is accessible. (Item #: 178324, Ref: TS3200M) $872.00

Hydraulic Valve Manifold - This 3 Spool Valve allows operator to use auxiliary hydraulics at the same time without valve switching. Some tractors may need slight modification on seat. Includes 2 elbows. Models from 1960 and later years. (Item #: 173361, Ref: 19833A92) $1159.01

LBP Coupler Center - This LBP Coupler Center Member measures (A) 3-5/8 inch diameter (B) four 5/16 inch holes, 2-1/4 inch spacing. Replaces 1753729M91. (Item #: 178931, Ref: 192169) $75.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.50

No
Picture
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.91

Valve - Valve for TS3200M. Single spool, 4-way, 3-position, spring loaded to neutral. No relief valve, no power beyond option. In and out ports 3/4 inch, work ports 1/2 inch NPT. (Item #: 183771, Ref: TS200BA) $303.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $14.90

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.90

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Item #: 169771, Ref: 170BH) $7.86

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $132.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.10

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.30

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $51.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $78.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.10

Lights

Headlight Kit, 12 Volt, LH, Chrome Ring - Kit contains 6" steel body, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 186851, Ref: S.43374) $102.00

Headlight Kit, 12 Volt, RH, Chrome Ring - Headlight Kit contains 6" steel, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 187205, Ref: S.22341) $106.00

Headlight Kit, 6 Volt, LH - Headlight assembly includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (LH), Primered. Assembly required. (Item #: S.43370) $98.00

Headlight Kit, 6 Volt, RH - Includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (RH), Primered. Assembly required. (Item #: S.22342) $101.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Item #: L200MAGH) $75.13

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Item #: 173803, Ref: L408-12V) $38.40

Miscellaneous

Air Cond Comp - New Air conditioning compressor, replacement for Frigidaire A-6 compressor. Includes 5.58" dia. clutch and dust cover, high pressure relief valve. With 12V coil at 10 Oclock, SAE thread. Less superheat switch (comes plugged with non-functional heat switch. For tractors that have air conditioning systems using the Frigidaire A-6 compressor already. (Item #: 109093, Ref: 1904014M92) $430.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Hand Cleaner, Gallon - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Item #: 180453, Ref: PRM25218) $24.60

Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $123.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.50

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $65.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.00

No
Picture
Paint, Dark Gray, 1 Gallon - This Dark Gray was used on Ferguson Implements from 1939 through 1948. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Fords (1939-1947). Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108333, Ref: TP2888GAL) $57.00

No
Picture
Paint, French Silver Mist Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108364, Ref: TP750GAL) $71.00

No
Picture
Paint, French Silver Mist Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108363, Ref: TP750QT) $27.00

No
Picture
Paint, French Silver Mist Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108362, Ref: TP750SP) $11.40

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $24.00

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.30

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184671, Ref: TP540GAL) $150.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP540QT) $61.00

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108367, Ref: TP235GAL) $90.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108366, Ref: TP235QT) $35.00

No
Picture
Paint, Light Gray, Spray Can - TO35 Sheet Metal 1954-56 and implements after 1954. From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108365, Ref: TP235SP) $11.00

No
Picture
Paint, MF Red, 1 Gallon - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102660, Ref: TP300GAL) $53.00

No
Picture
Paint, MF Red, 1 Quart - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102659, Ref: TP300QT) $22.10

No
Picture
Paint, MF Red, Spray Can - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102658, Ref: TP300SP) $7.70

No
Picture
Paint, MH Red, 1 Gallon - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108370, Ref: TP340GAL) $56.00

No
Picture
Paint, MH Red, 1 Quart - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108369, Ref: TP340QT) $24.00

No
Picture
Paint, MH Red, Spray Can - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108368, Ref: TP340SP) $10.20

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $59.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $24.00

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $24.00

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $8.50

No
Picture
Paint, Straw Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108373, Ref: TP345GAL) $138.00

No
Picture
Paint, Straw Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP345QT) $61.00

No
Picture
Paint, StrawYellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108371, Ref: TP345SP) $10.90

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $40.00

PTO / Driveline

Coupler Repair Kit - Coupler repair kit, services all Hub City over-running couplers. Contains keys, roll pin, set screw, springs, spacer, and retaining ring. (Item #: 182663, Ref: CRK600) $91.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $174.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Quick Release Pin - PTO quick release pin fits MOST American yokes. Replaces: 1810351M91, QDK1, QDK1M. (Item #: 112246, Ref: 1810351M91) $5.40

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $268.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

No
Picture
Seat Cover (Red and Yellow) - Tie-on for 19 inch wide pan seat. For Tractors that have a Red and Yellow color scheme. (Item #: XYFR30RY) $31.50

Tie-On Seat Cover - Grey, 19 inches wide. Deluxe with 2 inches of foam. This fits a PAN seat. (Item #: 178997, Ref: R2600) $56.00

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Bumper - Bumper assembly, mounting arms NOT included. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 178311, Ref: BU10211R) $134.00

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 1008553M1, 1052262M91 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $23.10

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $287.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 183027M91, 509893M91 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $78.00

Rim 10X28 - This rim measures 10 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. May come Painted primer or aluminum or off white color. Replaces 180863M91. (Item #: 103719, Ref: NCA1020B) $132.00

Rim 11X28 with 6 Loop Clamps - This rim is 11 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. Painted aluminum color. Shipped via truck Add $25.00 extra shipping per rim due to weight. Replaces 535450M91. (Item #: 104209, Ref: C5NN1050E) $147.00

Rim, 12X24 - Rim, 12 x 24 demountable rim for 13 x 24 or 14 x 24 tires. Add $52.95 extra shipping due to weight. 6 Loops, these measure 20 1/4 inches center-to-center across from one another. Uses special S.04352 bolt and nut kit. (Item #: 108579, Ref: 535454M91) $140.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $19.10

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $57.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $111.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $67.00

No
Picture
Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube. Not for use with radial tires. (Item #: 183819, Ref: WHS064) $82.00