(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Massey Ferguson Tractor Hydraulic


Click here to see parts by model


Massey Ferguson Seat, Hydraulic Lift Draft Control Spring
- This Hydraulic Lift Draft Control Spring Seat Fits Ferguson TE20, TEA20, TO20, TO30; Replaces: 181077M1, 890530M1, TO624 (Part No: 2N624)
$9.15

Massey Ferguson Hydraulic Pump Overhaul Kit
- For TE20, TO20, TO30, TEA20, TEF20. Kit contains cam blocks, pistons, chamber repair kits, PTO shaft bushing, safety valve, and gaskets. (Part No: HPOK1)
$110.33

Massey Ferguson Hydraulic Gear Pump
- For (MF30, MF40, 30, 40)(100, 200, 225, 235, 32, 32A, 34, 34A, 34B ALL LOADER)(212, 52, 44 ALL BACKHOE)(2200, 2500, 4500, 5400H, 6500, 6500H, 6800 ALL FORKLIFT)(2244, 400C ALL CRAWLER)(100, 200, 225, 235, 32, 32A, 34, 34A, 34B ALL LOADER)(212, 52, 54 ALL BACKHOE)(2200, 2500, 4500, 6500, 6500H, 6800, 6800H ALL FORKLIFT)(2244, 400C ALL CRAWLER). Hydraulic Gear Pump. Note: Includes Adaptor. Ports are located on side of rear housing. CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7\8 , SHAFT TYPE: 13 spline, ROTATION: Left hand, PORT SIZE INLET: 1-5\8 -12 ORB, PORT SIZE OUTLET: 1-5\16 -12 ORB, MOUNTING: 2 bolt SAE B , FORD PUMP APPLICATION: 730 & 735 loaders, CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIA: 7\8 , SHAFT TYPE: 13 spline, ROTATION: Left hand, MOUNTING: 2 bolt SAE B , INLET: 1-5\8 -12 ORB, OUTLET: 1-5\16 -12 ORB. (Part No: 1075358M1)
$547.05

Massey Ferguson Hydraulic Lift Cylinder Piston, 2 1\2 inch
- For TO20, TO30, TE20, TEA20, (FE35 above SN# 65684), 50 All with 2-1\2 Diameter Piston), TO35 SN<179303 with 2-1\2 Diameter Piston. Hydraulic Lift Cylinder Piston. DOES NOT come with Piston Rings set which can be ordered as part number 9N675. (Part No: 9N530B)
$30.03

Massey Ferguson Hydraulic Lift Pump
- For tractor models 230, 245, 250, 255, 265, 275, 283, 298, 50C, 670, 690, 698, 699), (20C, 30 Ind. all axle SN# FE101> without pressure control), (30B, 40 all axle SN# FF100> without pressure control), (30E, 50E all less auxiliary hydraulic) 240 8\91>. Hydraulic Lift Pump. Replaces 1661616M91, 1672148M92, 1675125M91, 1872449M96. (Part No: 1683301M92)
$550.62

Massey Ferguson Hydraulic Lift Pump
- For MF 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 290, 298, 670, 690, 698, 699, Ind 20C, 20D, 20E, 20F, 30, 30B, 30E, 31, 40, 40B, 40E, 50C. Hydraulic Pump with Pressure Control. Also replaces 1675125M92, 1675126M92, 1868439M98. (60468S) (Part No: 1672251M92)
$703.25

Massey Ferguson Hydraulic Pump
- Hydraulic Pump, front mount, for backhoes, crwlers, forklifts and loaders. 7\8 Outside Diameter, 13 spline, 21.5 GPM, 2000 rpm. The 2 bolt mount slots are 9\16 & open on the ends. Minimum measurement between the slots are 5 1\4 . Maximum is 6 7\8 For 30, 32, 34A, 34B, 40, 52, 54, 100, 200, 212, 225, 235, 400C, 2200, 2244, 2500, 4500, 6500. Hydraulic Pump. H10190RF210RM adapter included. (Part No: 2750128M91)
$547.05

Massey Ferguson Hydraulic Pump Drive Shaft with Coupler
- For 165, 175, Ind: 30, 3165. Front Mounted Hydraulic Pump Drive Shaft with coupler attached. 14 1\8 overall length, adapter end 7\8 threads, coupler end 13 splines. (Part No: 707166M92)
$134.94

Massey Ferguson Hydraulic Lift Cover Gasket Set
- For TO20, TO30, TE20. Hydraulic Lift Cover Gasket Set includes 2 Valve chamber gaskets, lift cover gasket, base pump gasket, 2 inspection cover gasket cylinder to center housing cover, 2 hydraulic lift cylinder housing gasket. (Part No: LCRK928)
$7.49

Massey Ferguson Hydraulic Pump Repair Kit
- Fits MF35, 65, 135, TO35, 150, 165, 175, 202, 2135, 302, 304, 50, 765. Repairs OEM Pump. Valve chamber has 5 holes on the sides of valve chambers. (Part No: S.40843)
$179.40

Massey Ferguson Hydraulic pump o-ring & gasket kit
- For tractor models 595 with MK2 pump, (240, 250, 265, 275, 290, 550, 565, 575, 590, 675, 690, 698 all with MK2 pumps). (Part No: 1810680M1)
$12.77

Massey Ferguson Hydraulic Control Valve
- With slotted end and with handle. For tractor models TO30, 50 Massey Harris. (Part No: 181163M1)
$17.23

Massey Ferguson Hydraulic Pump Valve Assembly
- For tractor models FE35, F40, MH50, TO35, 202, 203, FE35, F40, MH50, 35, 202, 203, Super 90. (Part No: 189427M92)
$15.38

Massey Ferguson Hydraulic Pump
- For tractor models (TO35 SN# 179304 and up), 35, (50 SN# 516837 and up), 65, 203, 205, 202, 203, 204, 231, 253, 302, 304. Valve Pushes Rearward. Replaces 183005M91, 184473M93, 184773M93. ***NOTE: various pumps were used on these models - verify configuration in picture. (Part No: 184473M93)
$317.33

Massey Ferguson Hydraulic Lift Cover
- For tractor models 231, 240 up to U42001, 240P, 250 Late, 261, 270 Late, 283, 290 Late, 298 Late, 670 Late, 690, 698, 699 Late, 20D, 20E, 20F, 30E, 40E, 50E. Lift Cover. (Part No: 1693547M91)
$476.10

Massey Ferguson Hydraulic Diverter Valve
- For 1080, 1085, 130, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 31, 3165, 35, 360, 362, 375, 383, 390, 392S, 393, 398, 40, 0B, 40E, 50, 50C, 50D, 50E, 65, 85, MH50, TO35 ALL WITH 3\8 NPT Ports. Fits in place of existing cover plate (180908M1 or 182373M91). Hydraulic supply continues available for lift arms, or two additional ports are available along with a return to tank. Only one supply can be selected at a time with hydraulics isolated in other positions. (Part No: S.60032)
$105.87

Massey Ferguson Hydraulic Valve
- For tractor models 1080, 135, 148, 165, 168, 175, 178, 185, 188, 20C, 230, 240, 245, 250, 255, 265, 275, 285, 290, 298, 30, 30B, 30E, 31, 350, 355, 365, 375, 390, 398, 399, 40, 40B, 50C, 50E, 550, 565, 575, 590, 595, 675, 690, 698, 698T, 699. This valve is 7.75 inches long. (Part No: 1870763M92)
$44.34

Massey Ferguson Hydraulic Safety Valve
- For tractor models TO35, 135, 150, 165, 175, 180, 35, 50, 65.(2750 psi)Replaces 883402M1, 40A63, 883402M92, 884747M93 (Part No: 883402M1)
$18.80

Massey Ferguson Hydraulic Piston
- For tractor models 135, 165, 175, 180, 20, 20C, 230, 235, 245, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 31, 40, 40B, 40E, 50C, 50D, 50E, 670, 698, 699. Seal kit is available as part number 2528201K1 . Piston is 3.375 inch diameter. (Part No: 1665738M91)
$44.10

Massey Ferguson Hydraulic Lift Shaft
- For tractor models TO20, TO30. Does Not come with 9N531C bushings. 37 Splines on each end. (Part No: 890722M1)
$298.07

Massey Ferguson Hydraulic Pump Valve Chamber
- Left Hand Valve Chamber, less valves. For tractors: TE20, TO20, TO30. Also replaces 181076M91. (Part No: 9N622)
$84.18

Massey Ferguson Hydraulic Pump Rebuild Kit, Comprehensive
- For tractor models TE20, TO20, TO30. Kit contains 2 cam blocks, 2 Pistons, 2 Chamber Repair Kits, PTO Shaft Bushing, Safety Valve, 2 Valve Chambers, 4 copper washers, Base Gasket, Sump Pump Gasket, 2 Side Gaskets, PTO Shaft Gasket, 2 Side Plate Gaskets. (Part No: S.61725)
$298.52

Massey Ferguson Piston, Hydraulic Pump
- Piston is .80 inch diameter (verify size). For tractor models 50, F40, FE35 SN# prior to <65684, TO35 prior to SN# 179304. (Part No: 181043M1)
$44.54

Massey Ferguson Piston, Hydraulic Pump
- Piston is .90 inch diameter (verify size). For model TO35 after serial number 179304. (Part No: 190799M1)
$26.88

Massey Ferguson Hydraulic Cylinder-2 1\2 Inch
- For tractor models TE20, TEA20, TEF20, TO20, TO30. Also replaces OEM #201183. (Part No: 829382M1)
$80.96

Massey Ferguson Hydraulic Pump Shaft for Loader
- Shaft, Pump Drive For 730 LOADER. Shaft is 7\8 inch diameter, 11-5\8 inch overall length. End A type: 13 spline, 7\8 inch size. End B type: 13 spline, 7\8 inch size. Associated components end B hub: C5NNN879A, 291061, 291315. (Part No: 7701044)
$41.63

Massey Ferguson Hydraulic Pump
- Pump, Hydraulic for 730 LOADER, 735 LOADER. SPECS: CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7\8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, PORT SIZE INLET: 1-5\8 inches-12 ORB, PORT SIZE OUTLET: 1-5\16 inches-12 ORB, MOUNTING: 2 bolt SAE B , FORD PUMP APPLICATION: 730 and 735 loaders, CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7\8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, MOUNTING: 2 bolt SAE B , INLET: 1-5\8 inches-12 ORB, OUTLET: 1-5\16 inches-12 ORB. (Part No: 7702425-29Z)
$547.05

Massey Ferguson Hydraulic Pump Cam Block
- Cam block, hydraulic pump. For tractors: TE20, TO20, TO30, TEA20, TEF20. Replaces 181066M1 (Part No: 9N617A)
$18.00

Massey Ferguson Hydraulic pump valve chamber assembly
- Hydraulic pump valve chamber assembly. Contains valves, springs, plugs, o-rings, & snap rings installed. Tractors: MF135, MF150, MF165 using .98 diameter piston; MF175, MF180. Hole sizes: (B) no hole. (C) 33\64 , 13.1mm. (D) 3\8 , 9.5mm. For MF135, MF150, MF165, MF175, MF180 (Part No: 1868435M3VA)
$73.94

Massey Ferguson Transmission and Hydraulic Filter
- Filter, hydraulic oil cooler, multi-power transmission. Measures 4.5 inches long, 1 3\4 inch diameter with a 1 inch hole. For tractors: Super 90, MF135, MF165, MF175, MF180, MF1080, MF1100, MF1130 industrials: 30, 30B, 30E, 40, 50A, 50E, 50F, 204, 205, 302, 304. (Part No: 191855M4)
$18.51

Massey Ferguson Hydraulic Pump Piston
- Piston, hydraulic pump. For tractors: TE20, TEA20, TEF20, TO20, TO30. Replaces 890675M1 (Part No: 9N615)
$24.00

No
Picture
Massey Ferguson Bushing, Hydraulic Lift Shaft
- Size is: 2-3\8 O.D., 2 I.D., 3 long. For tractors: TE20, TO20, TO30. For MF135, MF150, MF35, MF50, TO35 (Part No: 180896M91)
$17.52

Massey Ferguson Hydraulic Control Valve
- This Control Valve does NOT have a slot in the round end. Fits TE20, TEA20, TEF20, TO20, TO30. Hydraulic Valve Assembly includes housing, pintle, spring, pin clip, fully assembled. (Part No: 9N640)
$19.67

Massey Ferguson Hydraulic Valve Manifold
- This 3 Spool Valve Allows Operator To Use Aux. Hydraulics at the same Time Without Valve Switching. Some Tractors may need slight modification on seat.Includes 2 elbows. Models from 1960 and later years. (Part No: 19833A92)
$670.00

Massey Ferguson Stand Pipe, Hydraulic Oil Pressure
- 12.500 long. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 2135, 2200, 230, 235, 245, 253, 255, 285, 30, 302, 304, 31, 3165, 360, 362, 375, 383, 390, 390T, 3925, 40, FE135 Coventry. (Part No: 898229M1)
$19.11

Massey Ferguson Hydraulic Lift Rod
- For tractor models TE20, TEA20, TEF20, TO20, TO30. (Part No: 180903M2)
$26.85

No
Picture
Massey Ferguson Hydraulic Pump, RH Mount
- For tractor models 2640, 2675, 2705, 2745, (2775, 2805 SN# 9R0466 and up), 3505, 3525, 3545, 4640, 4650, 3670, 3680, 3690, 8120, 8140, 8150, 8160. (Part No: 3038730M2)
$592.71

Massey Ferguson Hydraulic Selector, isolator assembly
- For tractors without individual external hydraulic systems. Three-position spool, forward position allows one-way (push) for single acting cylinder. Center position allows operation of the 3-point arms, & the rear position will feed power to a 4-way control valve for two-way (push-pull) operation of double acting cylinder. Fits all MF tractors where 182373M1 lift cover is used. Replace MF cover plate, adds 2 ports I\O ports 3\8: NPT. (Part No: TS300)
$106.94

Massey Ferguson Piston Ring, Hydraulic - 3 1\8
- For tractor models 135, 135 UK, 150, 165, 165 UK, 230, 231, 235, 245, (265 SN# up to 9A349239), 282, 20, 20C, 30, 40, 2135, 3165. Priced each. If you order 3, you will receive 3 rings. Must be ordered in multiples of 3. (Part No: 897564M1)
$2.25

Massey Ferguson Hydraulic Pump
- For tractor models 154, 254, 263, 264, (353 up to ser. no. P06076), 363. (Part No: 3539858M91)
$258.85

Massey Ferguson Hydraulic Pump
- For tractor models 174, 184, 194, 274, 284, 294, (373 up to ser. no. P06076), 393. (Part No: 3539857M91)
$281.27

Massey Ferguson Hydraulic Pump, Tandem
- For tractor models 3060, 3070, 3080, 3085, 3090, 3095. (Part No: 3382280M1)
$600.26

Massey Ferguson Hydraulic Pump
- This Hydraulic Pump is for tractor models (373, 393 from ser. no. PO6077). Replaces 3534941M91. (Part No: 3533911M91)
$372.10

Massey Ferguson Standpipe, Hydraulic
- Used on models with pressure control, 12.5 long. For tractor models 150, 175, 180, 235, 245, 30, 31, (175, 178 SN# up to 709936), (135 SN# up to 79481), (165 SN# up to 520708), (185 SN# up to 320843). (Part No: 883788M91)
$24.38

Massey Ferguson Standpipe, Hydraulic Oil Pressure
- 9.75 inches long. For tractor models 135, 150, 175, 20, 20C, 20D, 20F, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 360, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50C, 50D, 50E, 670, 690, 698. (Part No: 1869119M1)
$14.18

Massey Ferguson Piston Rod, Hydraulic
- 8.250 long. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 245, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 302, 304, 31, 3165, 40, 40E, 50C, 50D, 50E, 690, 698, 699, FE135, 2135. (Part No: 886410M1)
$38.50

Massey Ferguson Hydraulic Pump Valve Chamber
- Right Hand Valve Chamber, less valves. For tractors: TE20, TO20, TO30. Also replaces 181074M91. Polished Steel Finish. (Part No: 9N621)
$84.18

Massey Ferguson Hydraulic Pump Valve Chamber
- Right Hand Valve Chamber, Less Valves. For TE20, TO20, TO30. Cast Iron. (Part No: 9N621-C)
$84.14

Massey Ferguson Top Link, Hydraulic
- Category I (3\4 ), 18.5 to 26.0 length, 2.00 cylinder bore, 3\4 UNF port size. (Part No: B8106)
$191.82

Massey Ferguson Hydraulic Lift Pump Rebuild Kit
- Repairs OEM pump. Replaces OEM Kit # 1810860M91. Chamber has 4 holes. Bottom hole = 1\2 inch. For tractor models 135, 165, 230, 235, 240, 245, 250, 255, 265, 275, 285, 290, 298, 350, 390, 398, 399, 675, 690, 698, 698T, 699, 1080, 1085. (Part No: S.40845)
$179.40

Massey Ferguson Hydraulic Pump Valve Chamber Assembly, RH
- Right hand valve Chamber with valves. For tractor models TE20, TO20, TO30. (Part No: 9N621-ASSY)
$82.73

Massey Ferguson Hydraulic Pump Valve Chamber Assembly, LH
- Left hand valve chamber with valves. For tractor models TE20, TO20, TO30. Cast Iron. (Part No: 9N622-ASSY)
$82.73

No
Picture
Massey Ferguson Hydraulic Parts, Universal
- Universal hydraulic parts such as hoses, filters, pressure gauges etc.. can be found in the Accessories and Universal parts section. (Part No: Hydraulic_Parts)
$00.00

No
Picture
Massey Ferguson Hydraulic pump filter
- For model 300. Replaces 3700504M91, 371122M92. (Part No: 371122M92)
$1.88

Massey Ferguson Clamp, Double Break-Away, Hydraulic
- For use with S20-4 and S40-4 Couplers. Quik-Cover Assembly HV4957 fits this Clamp. (Part No: S42-4)
$25.14

Massey Ferguson Hydraulic Valve Kit, Remote Control
- This 2 Levered, single spool valve includes hoses, quick couplers. The left lever shifts it from 3 pt to remote. The right one is the remote operation. It is set up much like the original OEM valve from the 60s. For tractor models TO35, 35, 135, 150, 175, 180, 1080, 230, 231, 235, 240, 245, 250, 253, 255, 265, 275, 282, 283, 285, 290, 360, 362, 375, 383, 390, 390T, 398, 399, 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E. (Part No: S.65502)
$400.42

Massey Ferguson Hydraulic Pump Safety Valve
- For: TE20, TEA20, (TEF20, before SN# 330043), TO20, TO30. Relief Valve rated to 2000 PSI. **Note: The part you recieve may look different than pictured, but will fit and work the same. (Part No: 181087M1)
$20.97

Massey Ferguson Auxiliary Hydraulic Pump
- This Auxiliary Hydraulic Pump is for models: 135 UK, 165, 165 UK, 175, 178, 180, 1080, 1085, 235, 240, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 298, 670, 690, 698, 699. Replaces OEM Numbers 1663627M92, 1686765M1, 1686765M91, 1686766M91, 1869458M92, 526099M93, 531604M92, 5316073M92, 531607M92, 531607M93, 886367M95, 886367M96. (Part No: 1663627M92)
$365.63

Massey Ferguson Hydraulic Coupler
- Hydraulic coupler for the following models: 360, 362, 375, 383, 390, 393, 396, 398, 399, 3090, 3120, 3630, 3650, 3660, 3680, 390T. Replaces: 1696241M91, 1696241M92, 3384873M4, 3384873M8, 3384874M4, 3611673M1, 3772942M1, 3794298M1, 3794298M2, 3905722M91, 4352104M1. (Part No: 3384873M8)
$71.65

Massey Ferguson Front Hydraulic Pump Drive Hub
- Fits: TE20, TO20, TO30 (when using our 1750301M1 crankshaft pulley); Replaces: 500934, 290421 (Part No: 500934)
$44.85

Massey Ferguson Hydraulic Pump
- This is a single stage Hydraulic Pump. It is used on Massey Ferguson 2640, 2675, 2705, 2745, (2775 Serial number 9R0466 and up), (2805 Serial number 9R0466 and up), 3505 combine, 3525 combine, 3545, 3630, 3650, 3655, 3660, 3680. Replaces 3038732M2, 3790723M1, 3903882M1 (Part No: 3038732M2)
$634.46

Massey Ferguson Hydraulic valve
- This is a Single Hydraulic Remote valve. It Bolts to the lift cover in place of 180908M1 cap. (Part No: 12012002)
$234.53

Massey Ferguson Hydraulic Piston
- This is an early style 3-3\8 inch, three ring piston. It uses 3 - 897597M1 rings, sold separately. Used on 135, 135 UK, 165, 175, 180, 230, 235, 245, 255, 261, 265, 275, 31 combine, 20, 30, 175 UK, 178 UK, 20C, 30B, 40B, 50C, 50D, MF 40. Replaces 899596M91 (Part No: 899596M91)
$29.43

Massey Ferguson Hydraulic Piston Ring
- This ring is used on 899596M91 3 -3\8 inch piston. Three are required. Priced and sold individually. Replaces original part number 897597M1. For tractor models 135, 165, 175, 180, 230, 235, 245, 255, 261, 265, 275, 31, 20, 30, 175, 178, 20C, 30B, 40B, 50C, 50D and 40. (Part No: 897597M1)
$1.98

Massey Ferguson Hydraulic Lift Control Quadrant
- This Hydraulic Lift Lever Control Friction Plate Fits TE20, TEA20, TO20, TO30. It Replaces original part number 180887M1, 180887V1, 185148M91 (Part No: 9N515)
$20.75

Massey Ferguson Hydraulic Lift Piston
- This is a single groove hydraulic lift piston that measures 2-1\2 inches in diameter, groove is centered 1 1\4 inch from bottom of piston. O-Ring available as NAA533A and back up washer as NAA473A. For tractor models 202 Indust\Const, 35, 35X, 50 Loader, TE20, TEA20, TO20, TO30, TO35. Replaces 181983M1. (Part No: NAA530B)
$20.52

Massey Ferguson Hydraulic Lift Piston Connecting Rod
- This hydraulic lift rod is used on FE35, TE20, TEA20, TO20, TO30, TO35, and 50 Tractors. It replaces original part numbers 180903M2, 887893M1. (Part No: 86563314)
$19.43

Massey Ferguson Gasket, Hydraulic Pump Drain
- This Hydraulic Drain Plug Gasket is used on TE20, TEA20, TO20, TO30 (Hydraulic Pump Drain Plug Gasket) ]; Replaces: 181468M1, TO7011 (Part No: 8N7011)
$1.38

Massey Ferguson Hydraulic Pump
- This is a tandem hydraulic pump used on Massey Ferguson 399 and 699 models with cold start valve and motor #A6-354.4. Replaces 3597420M91, 1810840M91, 3475875M1, 3475876M91, 3475878M1, ``3595383M91 (Part No: 3597420M91)
$687.24

Massey Ferguson Hydraulic Pump
- This is a Tandem Hydraulic Pump used on 4225, 4235, 4240, 4245, 4255, 4260, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 5335, 5340, 5355, 5360, 5365 Replaces 3701006M91, 3800194M91, 510665120, 3816909M91 (Part No: 3816909M91)
$480.17

Massey Ferguson Hydraulic Pump
- This is a Tandem Hydraulic Pump used on 4225, 4235, 4240, 4245, 4255, 4260, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 5335, 5340, 5355, 5360, 5365 Replaces 3701006M91, 3800194M91, 510665120, 3816909M91 (Part No: 3816909M91)
$480.17

Massey Ferguson Hydraulic Pump O-Ring and Gasket Kit
- This O-Ring and Gasket Kit is used on 135, 150, 165, 175, 180, 255, 265, 275, 30, 31, 40, 3165. It replaces 1810684M92 (Part No: 1810684M92)
$4.40

Massey Ferguson Hydraulic Pump O-Ring and Gasket Kit
- This O-Ring Kit with Gaskets is used on 230, 235, 245, 255, 265, 275, 1080, 1085, 285, 231, 240, 250, 253, 360, 362, 270, 282, 283, 290, 298, 20D, 30E, 40E Replaces 1810680M91 (Part No: 1810680M91)
$8.25

Massey Ferguson Hydraulic Pump Piston Ring
- This Hydraulic Pump Piston Ring is used with 1860038M1. Two are used per piston, 4 per Tractor. Sold individually. (Part No: 897493M1)
$1.41


Click here to see parts by model







PayPal


Customer Service
Monday - Friday
9:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure


  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2015 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.