(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Massey Ferguson 265 Tractor Parts

[ Show Pictures ]

[Categories]   [All Massey Ferguson Models]   [Print]  


Brakes
Brake Actuating Assembly - For tractor models 1080, 1085, 165, 175, 180, 255, 30, 40, (135, 235 both Orchard), (265, 275, 285, all SN# below 9A349239). Brake Actuating Assembly. (Part No: 535873M91)
$209.36

Brake Actuator - Nine Inch. For tractor models 135, 165, 175, 180, (235 Orchard), 255, 265, 275, 285, 1080, 1085, 30, 31, 40. Replaces 1860963M91, 1860963M92 (Part No: 1860963M91)
$78.66

Brake Conversion Kit - Converts dry brake to wet brake. Kit includes RH & LH differential plates, wet brake discs, brake rods, brake rod seals, and rod seal brackets. For tractor models 165, 175, 180, 255, 265, 275, 1080, (1085 up to SN# 9B44394), 30, 31. NOTE this kit ONLY fits models with square type malleable axles will NOT fit early 165, 175, 180 or any other tractor with round Detroit style axle housings. (Part No: S.41458)
$871.97

Brake Cylidner Repair Kit - This brake cylinder repair kit is compatible with the following tractor models: 1014, 1024, 1114, 1134, 235, 245, 250, 255, 260, 265, 274SK, 275, 290, 294S, 298, 560, 565, 575, 590, 592, 595, 675, 690, and 698. Services brake cylinder number 1698670M91. (Part No: S.42317)
$39.02

Brake Disc - Brake Disc is 8 7/8 inch outside diameter and 6 inch inside diameter, 27 splines. For tractor models 1080, 135, 165, 175, 180, 235, 255, 265, 275, 285, 30, 31, 40. Replaces 1805980M1. (Part No: 1044526M1)
$24.60

Brake Lever Bracket, Left Hand - Replaces 1860970M1. For tractor models 1085, 135, 165, 175, 180, 235, 245, 255, 265, 275, 283, 285, 30, 30B, 40, 40B, 4500, 50A, 50C, 6500. (Part No: 1860969M1)
$35.82

Brake Lever Bracket, Right Hand - Replaces 1667224M1, 1860972M2. For tractor models 1085, 135, 165, 165 UK, 175, 180, 20E, 20F, 235, 240, 245, 250, 253, 255, 261, 263, 265, 271, 275, 275 UK, 281, 282, 283, 283 UK, 285, 290, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50A, 50C, 50D. (Part No: 847705M2)
$82.25

Brake Master Cylinder - For tractor models (235 German only SN# Z173013), (255 German only), (260 from 2/1980 and up), (265 SN# 193552 and up), 270, (275 SN# 221522 and up), (290 SN# 387020 and up), (298 German only), (30E power shuttle), 40E, 50E. (Part No: 1698670M1)
$98.56

Brake Pad - Replaces 888739M1. For tractor models 1080, 135, 148, 155, 158, 165, 168, 185, 188, 240, 265, 275, 285, 290, 298, 340, 350, 355, 360, 365, 375, 390, 390T, 398, 399, 550, 565, 575, 590, 595, 675, 690, 698, 699. (Part No: 1662242M2)
$35.01

Brake Rod Seal - Brake Rod Seal MASSEY FERGUSON: Seal, for brake pull rod, wet disc brakes. Fits into left & right lever brackets. Tractors: MF154-4S, MF174-4S, MF194-4, MF194-4F, MF245, MF250, MF253, MF254-4, MF255, MF265, MF270, MF274-4, MF275, MF282, MF283, MF285, MF290, MF294-4, MF298, MF670, MF690, MF698, MF699, MF1085. Industrials: 30D, 30E, 40E, 50D, 50E. Replaces 1667175M1. Sold in Multiples of 2 only, price shown is for one (Part No: 1860959M1)
$5.29

Brake Shaft, Bushing - 1-3/8" x 1-1/2" x 1-7/16". For tractor models TE20, TO20, TEA20, TO35, FE35, F40, 1080, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 275, 285, 35, 50. (Part No: 180801M1)
$3.07

Spring - Spring, actuator disc return for disc brakes on tractors, just over 1 inch long: MF154-4, MF184-4, MF235 orchard, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, MF290, MF298, MF360, to SN# V39466, MF375 to SN# V39466, MF383 to SN# V39466, MF390 to SN# V39466, MF398 to SN# V39466, MF399 to SN# V39466, MF670, MF690, MF698, MF699 industrials: 30B, 30D, 30E, 40B, 40E, 50C, 50D, 50E, 50F forklift: 4500, 6500. For the following tractors with cast iron axle: MF135, MF165, MF175, MF180 industrials: 30, 31, 40, 50A. For 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 4500, 50A, 50C, 50D, 50E, 50F, 6500, MF135, MF154-4, MF165, MF175, MF180, MF184-4, MF235, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, and more (Part No: 1853148M1)
$1.94

Spring, Brake Lock - For tractor models 235 Orchard, 245, 255, 265, 275, 285, 20C, 30, 30D, 40, 40B, 50C, 50D. (Part No: 186441M2)
$3.25

Clutch
Clutch Alignment Tool - Dual stage clutch alignment tool with 1 1/8" by 10 splines and 1 5/8" by 25 splines. For tractor models 133, 135, 140, 148, 150, 152, 155, 158, 165, 168, 175, 175UK, 178UK, 180, 20, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240P, 240S, 245, 253, 255, 261, 263, 265, 265S, 270, 271, 271X, 271XE, 275, 281, 281X, 281XE, 282, 283, 285, 285S, 290UK, 30, 30E, 3165, 35, 40E, 383, 390, 481, 670, 690, 50, 65, 97, TO35 (Part No: 1212-5955)
$14.98

, MF255 late production with 254046 on cover casting, MF265. **An additional $25 will be added for shipping on this item (50lbs). IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED." />
Clutch Assembly, Dual 12 Spring - Uses 11"x1-1/8" 10 spline main disc(NOT INCLUDED) and 9"x1-5/8" captive PTO disc. For MF175 SN# 9A1308030>, MF255 late production with 254046 on cover casting, MF265. **An additional $25 will be added for shipping on this item (50lbs). IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 532321M91)
$296.70

Clutch Disc - Clutch disc, 11", 10-spline, 1-1/8" hub, damper springs, organic lining. For split torque single clutch in tractors: MF165, MF175, MF180, MF225, MF265. For MF165, MF175, MF180, MF255, MF265 (Part No: 513580M91)
$122.01

Clutch Disc PTO - 9 Inch, 1 5/8 inch hub with 25 splines. For tractor models 20C, 20, 30B, 30D, 30, 40B, MF135, MF150, MF165, MF175, MF230, MF235, MF245, MF255, MF265 (Part No: 1043282M92)
$49.00

Clutch Disc, 11 Inch - 10 Spline, 1.125" hub. For all MF tractors with 11" DUAL Clutch, EXCEPT for TO35: (to SN# 177394 & 177520 thru 177537); F40, MH50. Tractors: TO35 late production, 35, 50, 65, 135, 150, 165, 175, 180, M230, MF235, MF245, MF255, MF265, MH50, industrials: 20, 20C, 30, 30B, 30D, 40B.. Will replace 890302M91. (Part No: 516068M91)
$34.13

Clutch Disc, 11 Inch - 10 Spline 1.125 spline diameter. Feramic, Solid. For tractor models 130, 135, 165, 175, 180, 20, 202, 203, 2135, 2165, 2200, 230, 245, 25, 255, 265, 290, 30, 302, 30B, 30D, 3165, 35, 40B, 50 SN# 515396->, 65, TO35 SN# 177395-177519 & 177538->. All with dual clutches (Part No: 185892-RF)
$269.65

Clutch Kit - Kit contains 1 11" 10 spline drive disc, 11" 25 spline heavy duty double pressure plate, pilot and release bearings, includes pilot tool. For tractor models 175, 175 U.K., 178 U.K., 255, 265. (Part No: 1212-1458)
$265.65

Clutch Kit, 11 inch - Contains 532320M91 9 spring pressure plate (Replaces original 12 spring)with 1 inch hub, comes with a 25 Spline PTO Disk on 1 5/8 inch hub. 516068M93 clutch disc as well as a release bearing with a 2 1/2 inch diameter, pilot bearing and clutch alignment tool. For tractor models 150, 165, 175, 175 UK, 178 UK, 180, 20C, 2135, 235, 245, 255, 265, 30, 30B, 30D, 3165, 35, 40B, 50, 65, 97. (Part No: 1212-1465)
$255.29

Clutch Kit, 11 inch - Contains 526665M91 pressure plate with a 10 Spline PTO Disk, 516068M93 clutch disc as well as a release bearing, pilot bearing and clutch alignment tool. For tractor models with Medium Tension Springs for regular agricultural use: 150, 165, 175, 175 UK, 178 UK, 180, 20C, 2135, 235, 245, 255, 265, 30, 30B, 30D, 3165, 35, 40B, 50, 65, 97. (Part No: 1212-1417)
$249.93

Clutch Kit, 11 inch - Contains 526664M91 pressure plate with a 10 Spline PTO Disk, 516068M93 clutch disc as well as a release bearing, pilot bearing and clutch alignment tool. For tractor models with Heavy Tension Springs for Industrial use: 150, 165, 175, 175 UK, 178 UK, 180, 20C, 2135, 235, 245, 255, 265, 30, 30B, 30D, 3165, 35, 40B, 50, 65, 97. (Part No: 1212-1426)
$231.58

Clutch Lever Kit - This Clutch Lever Kit contains (10) 376123X1 nuts, (3) 891827M1 pins, (3) 889910M1 springs, (3) 887898M1 levers, (3) 891826M1 pins, (3) 1853164M1 bolts. For tractor models 135, 148, 155, 158, 165, 168, 178, 185, 188, 230, 240, 250, 265, 275, 285, 290, 298, 340, 350, 355, 360, 365, 375, 390, 390T, 398, 399, 550, 565, 570, 590, 595, 675, 690, 698, 698T, 699. Used on 10 and 12 inch Double Clutch. (Part No: VPG6001)
$37.48

Clutch Release Fork - For tractor models 135 SN# <9A105179, 135 UK, 230, 235, 240, 245, 250, 255, 265, 270, 275, 283 Brazil, 290 UK. (Part No: 886719M1)
$56.88

Clutch Spring - For tractor models 135, 148, 165, 168, 175, 178, 185, 188, 240, 250, 265, 275, 290, 35, 375, 390, 398, 550, 565, 575, 590, 595, 65, 675, 690, 698. All with multi power transmissions. (Part No: 186519M1)
$3.30

PTO Clutch Plate - Clutch plate, external teeth, for independent PTO, 7 required. For tractors: MF240, MF265, SN# 9A349239 & up 2-speed only, MF270, MF275 SN# 9A349239 & up 2-speed only, MF290, MF298, MF360, MF375, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699 industrials: 30E, 40E, 50E. For 50E, MF231, MF270, MF283, MF290, MF298, MF4800, MF4840, MF4880, MF4900, MF670, MF690, MF698, MF699 (Part No: 1870860M1)
$9.75

, 65, TO35 SN# 177395-177519 & 177538-> All with dual clutches. Replaces 1034195M1, 1539020C1, 1753753M1, 1753753M94, 1753753M94-A, 181102M92, 1851652M92, 323022046, 323022047, 3620411-RF, 3620411-RO, 3620411M1, 3620411M91, 392492R91, 709640R92" />
PTO Disc, 9.055 - 9.055" Rigid disc, organic, spline dia. 1.75" 10 spline. For tractor models 130, 135, 165, 175, 180, 20, 202, 203, 2135, 2165, 2200, 245, 25, 255, 265, 290, 30, 302, 30B, 30D, 3165, 35, 40B, 50 SN# 515396->, 65, TO35 SN# 177395-177519 & 177538-> All with dual clutches. Replaces 1034195M1, 1539020C1, 1753753M1, 1753753M94, 1753753M94-A, 181102M92, 1851652M92, 323022046, 323022047, 3620411-RF, 3620411-RO, 3620411M1, 3620411M91, 392492R91, 709640R92 (Part No: 323022047)
$26.25

Pilot Bearing - For tractor models 1004, 1004T, 105, 1080, 1085, 130, 133, 135, 140, 145, 148, 150, 152, 155, 157, 158, 165, 168, 175, 177, 178, 180, 185, 188, 20, 202, 203, 204, 205, 20B, 20C, 20D, 20E, 20F, 20H, 2135, 2165, 220, 2200, 230, 235, 240, 245, 25, 250, 253, 255, 260, 2620, 2625, 2640, 2645, 265, 2680, 2685, 270, 2720, 2725, 275, 282. Replaces OEM 828123M2. (Part No: C5NN7600A)
$1.97

Pressure Plate - Clutch pressure plate, external lugs for multi-power transmission, 3 required. For tractors: MF35, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF235, MF240, MF245, MF255, MF265, MF275, MF290, MF298, MF375, MF390, MF398 industrial: 30. For 20D, MF135, MF165, MF175, MF180, MF235, MF240, MF245, MF255, MF265, MF275, MF35, MF50, MF65, TO35 (Part No: 185464M1)
$12.77

Pressure Plate, 11 - Remanufactured, with 1.406" flywheel step, 1.625" spline diameter, 25 spline. For tractor models 202, 203, 255, 30, 50D and these split torque Models: 165, 230, 235, 245, 255, 265, 40B, 50C, 65. (Part No: 532323-R)
$271.32

Pressure Plate, 11 Inch - For 20C, 20, 30B, 30D, 30, 40B, 40, MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF255, MF265, MF35, MF50, MF65, TO35 (Late production) (Part No: 1040884M1)
$146.87

Release Bearing - Sealed Release bearing for single and dual clutch, 2.50" I.D., 3.936" O.D. For tractor models 1080, 1085, 1100, 1130, 130, 133, 135, 140, 145, 148, 150, 152, 155, 157, 158, 165, 168, 175, 177, 178, 180, 185, 188, 20, 202, 203, 204, 205, 20B, 20C, 20D, 20E, 20F, 20H, 2135, 2165, 2200, 220, 230, 235, 240, 245, 250, 255, 260, 265, 270, 275, 282, 285, 290, 298, 30, 302, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35. (Part No: 892862M2)
$17.61

Release Bearing - Used in single and dual clutches. For tractor models (FE35, 1080, 1085, 135, 135 UK, 150, 165, 165 UK, 175, 180, 20E, 235, 240, 245, 253, 255, 265, 270, 285, 30E, 30H, 31. It has an inside diameter of 2.49 inches, an outside diameter of 4.06 inches, and is .82 inches wide. Please verify measurements before ordering. (Part No: 833084M1)
$19.50

Release Bearing - Greasable Release Bearing is 4.152 inches O.D., 2.5 I.D., .87 wide for tractor models 105, 133, 135, 140, 145, 148, 150, 152, 155, 157, 158, 165, 168, 175, 177, 178, 180, 185, 188, 202, 203, 204, 205, 20B, 20C, 20D, 20F, 20H, 230, 235, 240, 245, 250, 255, 260, 265, 270, 275, 285, 290, 298, 30, 30B, 30D, 30E, 340, 342, 35, 350, 360, 365, 375, 390, 40, 50, 550, 560, 570, 65, 690, 765. (Part No: 500019940)
$19.35

Release Lever - For tractor models 150, 20C, 20, 30B, 30D, 30, 40B, 40, MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF255, MF265, MF35, MF50, MF65, TO35. (Part No: 899818M2)
$12.33

Trans. Disc 11 - NEW, feramic, solid. 1.125" spline diameter, 10 spline. For tractor models 202, 202 Workbull, 203, 2135, 255, 30, 3165, 4500, 50D, and these split torque Models: 165, 175, 180, 230, 235, 245, 255, 265, 40B, 50C, 65. (Part No: 526965-RF)
$129.44

Trans. Disc, 12 - Organic, Rigid disc, Replaces 887889M94, 1.125" spline diameter, 10 spline. For tractor models 133, 135, 140, 148, 152, 155, 157, 158, 165, 168, 175, 177, 178, 188, 20, 20B, 20D, 20E, 20F, 20H, 230, 235, 240, 245, 250, 253, 255, 260, 265, 270, 275, 282, 283, 285, 290, 30, 30D, 30E, 30H, 40, 40B, 500, 50E, 550, 560, 575, 590, 670, 690. (Part No: 3599462M92)
$48.09

Cooling System
Fan Belt - For tractor models 150, 40B, 50C, 50D, MF255, MF265, MF275. (Part No: 517344M2)
$9.45

Fan, 6 Blade - 16.250" diameter, 1.625" pilot hole, 2.500" bolt hole centers. For tractor models (175 with Perkins gas engine), (255 diesel), (265 SN# up to 9A349239 gas or diesel). (Part No: 521269M1)
$60.47

Radiator - Radiator with oil cooler & 4.796" neck for MF tractors: (255 diesel with A4-236 engine, SN# <-9A282760)and (265 diesel, SN# <-9A282759). Core size: 15.125" wide, 18.875" high, 3 rows of tubes, 8 fins per inch. (Part No: 531981M94)
$385.89

Radiator Hose Lower - Hose, radiator lower. For Perkins gas engines in tractors: MF165 SN# 9A67215 & up, MF175 SN# 9A67215 & up, MF255, MF265 gas. For MF165, MF175, MF255, MF265 (Part No: 520646M1)
$7.43

Radiator Hose, Bottom - 1.50" I.D.. For tractor models (168 with A4-236 engine), (175 diesel), (180 Perkins gas up to SN# 67215), (185 with A4-248 engine), (255, 265, 275, 565, 575 diesel A4-236 engine) (Part No: 898748M1)
$9.13

Radiator Hose, Lower - Hose, radiator lower. For tractors: MF175 diesel, MF255 with A4-236 diesel, MF265 diesel except orchard. For 20, 202, 203, 204, 205, 2135, 35, MF135 (Part No: 194737M1)
$12.44

Radiator Hose, Upper - For tractors: MF165 with Perkins gas, MF175 with Perkins gas or diesel, MF255 gas or A4-236 diesel, MF265, MF275 industrials: 30 gas, 31. (Part No: 194736M1)
$13.30

Thermostat Body - For tractor models 165, 165UK, 174-4S, 175, 175UK, 178, 180, 184-4, 255, 261, 265, 270, 274-4, 275, 275UK, 282, 283, 283UK, 285, 290, 290UK, 294-4, (374S, 374V, 384S, 394S all up to SN# D03066), 1745, 6500, 6530, 6830, 6830C, 6830FC, 6860, 6870, 6880, 7830, 7830C, 7860, 7870, 7880, 8500, 8530F, 8830, 8860, 8870, 8880, 24, 25, 30, 31, 50C, 50D, 50E, 50H, 60H, 6500, 6800H, 7500. Replaces 37762705. (Part No: 739379M3)
$46.40

Thermostat,180 Degree - For: F40, FE35, 150, Deluxe, TO35, 1080, 1085, 1100, 1105, 1130, 1135, 130, 135, 148, 150, 154, 1545, 168, 175, 187, 185, 188, 20, 202, 203, 204, 205, 20C, 20D, 20E, 2135, 2200, 2244, 230, 235, 240, 245, 250, 2500, 253, 254, 265, 275, 285, 290, 298, 30, 30B, 30E, 30H, 320, 35, 350, 35X, 360, 362, 40, 40E, 4500, 470, 4830FC. (Part No: 1446165M91)
$7.00

Water Pump - With Pulley - With 1/2 inch diamter shaft. For A4-236 diesel & A4-248 diesel in tractors: 175, 180, MF255, MF265, MF270, MF275. (Less plug). Replaces 41313225, 743064M91, 3637411M91. (Part No: 3641219M91)
$50.16

Water Pump Gasket - This Gasket is for 3641250M91 and other water pump backplates. 1004, 1014, 1080, 135, 148, 165, 168, 174, 175, 178, 184, 185 BACKHOE, 188, 194, 230, 240, 250 SKID STEER LOADER, 254, 255, 265, 273, 274, 275, 283, 284, 285, 290, 293, 294, 340, 342, 35, 350 INDUST/CONST, 352, 355, 360, 362, 372, 373, 374, 375, 377, 383, 384, 387, 390, 393, 394, 397, 550, 560 COMBINE, 565 COMBINE, 575 SKID STEER LOADER, 590, 595, 675, 690, 698. Replaces 3638177M1, 4224122M1, 4224387M1, 731165M1. (Part No: 4224387M1)
$1.49

Water Pump Repair Kit - Repairs, 3637411M91, 743065M91 water pumps. Replaces, 739013M91, 740212M91, 741964M91. For tractor models 165, 168, 174-4S, 175, 184-4S, 185, 188, 194-4F, 240, 265, 274, 274S, 274SK, 275, 284-4S, 285, 290, 294S-4S, 362, 373, 377, 383, 387, 393, 397, 440, 50, 50B, 50D, 50E, 50EX, 50H, 50HX, 565, 575, 590, 60H, 675, 690. All the above with A4.212, A4.236 or A4.248 engines. (Part No: 3637482M91)
$43.26

Water Pump, Less Pulley - For tractor models (165, 175, 255, 30 all with Perkins gas engine), (180 with Perkins gas engine SN# 236UA1732A and up). Replaces 740490M91, 740489M91, 37711070. (Part No: 743065M91)
$107.21

Water Pump, Less Pulley - Has a 3/4 diameter shaft. For tractor models (175, 180, 255, 265, 270, 275 all with A4-236 or A4-248 diesel engines), (178 with A4-248 diesel engine). Replaces 3640565M91, 3771630, 4131225, 743064M91. (Part No: 3637411M91)
$46.78

Decals and Emblems
Decal Set - Decal Set(Hood Only) for Massey Ferguson Model 265. (Part No: R1486)
$33.86

Decal Set - Complete Decal Set(with Hump) for Massey Ferguson Model 265. (Part No: R2087)
$68.76

Drive Train
8 Speed Constant Mesh Transmission Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application & availability. NOTE

8 Speed and Multi-Power Selector Parts (NON Synchromesh) - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application & availability. NOTE

Axle Bolt - Lock bolt for adjustable front axles. For tractors: F40, MH50, MF50, MF65, MF150, MF175, MF230 SN# 9A243032 & up, MF245 semi-swept, MF255, MF265, MF275 industrials: 20C, 30, 31, 3165 turf. Can replace 182501M1. Usable length 3-3/4, =5-1/8 overall, 3/4-16 thread. For tractor models MF1100, MF1105, MF1130. (Part No: 523387M1-L)
$10.52

Axle Shaft, Rear Wheel - For tractor models 165, 168, 175, 178, 185, 188, 250, 265, 575, (275, 675 normal duty). (Part No: 884847M1)
$265.97

Bearing Cone - Cone (53177) for differential. For tractors: TO35 SN# 169467 & up MF50 using sleeve 181251M92 MF35, MF135, MF150, MF165, MF175, MF180, MF235, MF255, MF265, MF275. (Part No: 195163M1)
$96.97

Bearing Cone - Cone (HM903249), for differential. For tractors: TO35 SN# 169467 & up, using sleeve 181251M93 MF35, MF65 SN# CL2686122 & up, MF165, MF180 using sleeve 190606M92 MF175, MF235, MF255, MF265, MF275. (Part No: 831888M1)
$25.99

Bearing Cup - Single cup (53375) for differential, two used. For tractors: MF35, MF135, MF150, MF165, MF175, MF180, MF235, MF255, MF265, MF275. (Part No: 17392A)
$41.83

Bearing Cup - Rear Axle Inner Bearing Cup. For tractor models MF135, MF165, MF175, MF180, MF235, MF255, MF265, MF275, MF65. (Part No: 185252M1)
$32.19

Bearing Cup, Differential - For tractor models FE35, TE20, TO20, TO30, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 24, 240, 240P, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 285, 30, 30B, 30D, 30E, 30H, 302, 31, 3165, 356, 360, 362, 3630, 3650, 375, 383, 390, 390T, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 65, 6500, 670, TO35 SN# <-169467. Replaces 1850090M91. (Part No: 185778M1)
$17.94

Bearing Cup, Rear Axle, LH Inner - This LH Bearing Cup measures 4.438 Outside diameter and .938 width. Fits models 135, MF150, MF165, MF175, MF180, MF235, MF255, MF265, MF275, MF35, MF50, MF65, TO20, TO30, TO35. (Part No: 195160M1)
$8.81

Bearing Kit - Needle bearing kit, for transmission reverse idler gear. Not for shuttle, instant reverse, or 12-speed transmissions, (1) required. For tractors: TO35 SN# 171549 & up, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240. (Part No: 830735M91)
$28.12

Bearing, Mainshaft - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 261, 263, 265, 270, 271, 275, 281, 282, 283, 285, 290, 298, 30, 31, 360, 362, (365 SN# up to B18009), 375, 383, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50C, 50D, 50E, 50F, 50H, 50HX, 60H, 670, 690, 698, 699. (Part No: 338552X1)
$38.87

Bearing, Outer Input Housing - 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20E, 20F, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 35, 35X, 360, 362, 375, 383, 385, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50C, 50D, 50E, 65, 670, 690, 698, 699.Used on 1860889M1 retainer. (Part No: 886668M1)
$11.82

Bearing, Pinion Pilot - For tractor models 135, 148, 155, 158, 165, 168, 175, 178, 185, 188, 230, 240, 250, 265, 275, 285 with 11x38 differential, 290, 340, 35, 350, 355, 360, 362, 365, 375, 390, 390T, 398, 399, 550, 565, 575 with 11x38 differential, 590 with 11x38 differential, 65, 675, 690 with 11x38 differential, 765, FE35. (Part No: 191250M1)
$31.50

Bearing, Transmission Mainshaft - For tractor models (165 SN# 114352 and up with multipower trans), (168 SN# 215803 and up with multipower trans), (185 SN# 308909 and up with multipower trans), (188 SN# 352835 and up with multipower trans), (135 SN# 418436 and up with multipower trans), (175, 178, 20B, 20D, 240, 250, 265, 275, 285, 290, 550, 565, 575, 590, 675 all with multipower trans). (Part No: 834844M1)
$11.60

Bolt, Ring Gear to Case - 1/2" X 1 45/64" NF. Order in lots of 12. USE WITH NUT 891947M1. For tractor models 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 135, 150, 1500, 1505, 165, 175, 1800, 1805, 20, 202, 203, 204, 205, 20C, 2135, 220, 2200, 230, 231, 235, 240P, 245, 2500, 255, 265, 275, 282, 283, 285, 30, 302, 304, 3050, 3060, 3070, 3080, 3090, 30B, 30D, 31, 3120, 3125, 3140, 3165, 320, 350, 3505, 3525, 3545, 356, 3630, 3650, 3655, 3660, 3680, 40, 40B, 4500, 50, 50C, 50D, 50H, 60, 65, 6500, 6500H, 690, 698, 699, 70, 80, 85, 88, Super 90, F40, FE135, TO35. **MUST BE ORDERED IN MULTIPLES OF 12** (Part No: 825776M1)
$3.04

Carrier Assembly - For epicyclic pinion gear. Models: 135, 150, (155, 158, 165 with multi power), 175, 20, 202, 203, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, (265, 275, 285, 290 with multi power), 30, 302, 30B, 30D, 30E, 30H, 31, 3165, 35 SN# 365360->, 360, 362, 375, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, (550, 565, 575, 590 with multi power), 65, 6500, 765 SN# 609714->, FE135 Coventry. (Part No: 897711M93)
$188.09

Center Tube - Tie rod tube, Right Hand, includes set screw & lock nut. 17-3/4" overall length. For adjustable front axle on tractors: 165, 168, 175, 185, 188, 255, 265, 270, 275, 282, 283, 290, 565, 575, 590, 675, 690. (Part No: 886801M91)
$46.13

Constant Mesh Transmission Gear - 42 teeth, 20 spline. For tractor models 135 Orchard, 165, 175, 235 Orchard, 245 Orchard, 250, 255, 265, 270, 275, 282, 283, 290 UK. (Part No: 1862422M1)
$100.66

Countershaft - 8 speed transmission, 17/20 spline, 15 tooth, 12.250" long. For tractor models 1085, 135, 150, 1505, 165, 175, 20, 20C, 20D, 20F, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50C, 50D, 50E. (Part No: 906472M2)
$134.19

Countershaft, Transmission, 17 Spline, 15 Teeth - Shaft is 12.25" long. For MultiPower Transmissions on: 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 235, 240, 245, 250, 255, 265, 270, 275, 285, 290, 298, 30, 35, 50, 550, 565, 575, 590, 65, 765, FE135, FE35. (Part No: 189391M92)
$180.49

Coupling, Rear Drive Shaft - 3.750" long, 10 spline. For tractor models 135, 150, 165, 175, 180, 203, 205, 20E, 20F, 2200, 235, 24, 240, 245, 25, 250, 2500, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 356, 360, 375, 383, 390, 390T, 392S, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 60, 60H, 60HT, 65, 6500, 6500H, 670, 675, 6800H, 690, 698, 699. (Part No: 1680189M1)
$34.72

Crown Wheel & Pinion Set - Ring has 38 teeth, Shaft has 11 teeth, 10 spline. Approx 9 7/8"- 9 15/16" total length. For tractor models 135, 150, 165, 165 UK, 175, 175 UK, 178, 180, 200 Series, 20E, 20F, 2200, 235, 24, 240 SN# N01001-A20286, 245, 25, 250, 2500, 253, 255, 261, 263, 265, 265S, 270, 271, 275, 275 UK, 281, 282, 285S, 290 UK, 30, 302, 304, 30E, 30H, 31, 3165, 360, 362, 365, 375, 390, 399, 40, 40E, 4500, 50, 50E, 50H, 50HX, 60H, 65, 6500, 670, 6800H. (Part No: 1664255M92)
$394.47

Differential Bearing & Cup - Fits in differential lock.For tractor models MF135, MF165, MF175, MF180, MF235, MF255, MF265, MF275, MF35, MF65, TE20, TEA20, TEF20, TO20, TO30, TO35, FE35, F40. (Part No: 195159M1)
$23.25

Differential Coupling Cap - 6 lug. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 203, 205, 20F, 220, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 320, 356, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 65, 6500, 6500H, 670, 6800H, 690, 698, 699, Super 90. (Part No: 898712M2)
$70.52

Differential Cover - For tractor models 135, 150, 165, 175, 180, 20E, 20F, 2200, 235, 245, 250, 2500, 253, 255, 265, 272, 275, 282, 283, 285, 290, 30, 30B, 30D, 30E, 302, 304, 31, 3165, 356, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 6500, 670, 690. Replaces 894781M3, 894780M92. (Part No: 3759150M1)
$139.38

Differential Lock Fork - For tractor models 1080, 135, 165, 175, 180, 20F, 220, 235, 24, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 320, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 6500, 6500H, 670, 6800H, 690, 698, 699. (Part No: 906807M1)
$53.07

Differential Lock Fork Coupler - 6 lug. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 203, 205, 20F, 220, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 320, 356, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50E, 50H, 60, 60H, 60HT, 6500, 6500H, 670, 6800H, 690, 698, 699. (Part No: 897003M3)
$62.32

Dipstick, Differential Oil Level - Verify length of 6 1/8 inches. For tractor models 135, 20, 20C, 20D, 20F, 230, 231, 235, 24, 240, 240P, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30b, 30D, 30E, 360, 362, 375, 383, 390, 390T, 393, 398, 40, 40B, 40E, 50C, 50D, 50E, FE135 Coventry. (Part No: 1665962M91)
$4.26

Drive Shaft Retainer Housing - For NON Multipower transmission. Fits 8 Speed transmission in: 135, 150, 165, 235, 240, 245, 250, 255, 265, 275, 383. Fits 8 or 12 speed transmission in: 360, 362, 375, 390, 390T, 398, 399. (Part No: 1693833M92)
$91.02

Drive Shaft, Reverse Gear - 6.580 L, 1.00 dia. For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 290, 298, 30, 31, 35, 360, 375, 383, 390, 390T, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35 (Part No: 180445M1)
$20.46

Gear Shift Boot - I.D. top = 5/8, I.D. bottom = 1-11/16", height 4-3/8". For tractor models 35, 50, 65, 135, 150, 165, 175, 240, 250, 253, 255, 265, 270, 275, (283 8/1993 and up), 290, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 670, 690, 698. (Part No: 1694127M1)
$4.28

Gear Shift Boot - For tractor models 135, 135UK, 150, 165, 175, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 283UK, 285, 290, 298, 360, (375, 383, 390, 393, 396> SN# B06171), IND 20, 20C, 20D, 30, 31.Top hole 5/8 Bottom 2 inch. Replaces K929631. (Part No: 1678565M2)
$1.94

Gear Shift Boot - For tractor models TE20, TO20, TO30, TO35, 35, 50, 65, 85, 88, Super 90, 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 285. Top Hole 1/2 inch Bottom hole 1 1/2 inch (Part No: 520858M1)
$1.35

Gear Shift Knob, 6 Speed - 6 speed shift knob. Can replace plain knob & pattern label 1682623M1 & 1682630M1. For 20, 20C, 30, 30B, 30D, 31, 40, 40B, 50C, 50D, MF135, MF135 UK, MF150, MF165, MF165UK, MF175, MF230, MF235, MF245, MF255, MF265, MF275, MF285 (Part No: 1862401M1)
$8.58

Gear, 1st - This gear is 1st gear for 8 speed trans. Replaces 520700M1, 183042M1. Gear has 44 teeth and is a 18 spline. For tractor models FE35, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 203, 2135, 2200, 230, 235, 240, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 31, 3165, 360, 362, 375, 383, 390, 390T, 40, 40B, 50, 50C, 50D, 50E, 65, (20F, 40E, 50H ALL UK MODELS), 35 GAS/DIESEL, 282 MEX. (Part No: 1682688M1)
$68.42

Gear, 2nd - This gear is 2nd speed for 8 speed trans. Gear has 23 teeth. For tractor models FE135, FE35, F40, MH50, TO35, 1080, 1085, 11, 165, 148, 150, 155, 158, 165, 168, 175, 178, 185, 188, 20, 20C, 20D, 20F, 202, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 550, 565, 575, 590, 65, 765. (Part No: 180419M1)
$19.76

Gear, 3rd - This gear is 3rd speed for, 8 speed trans. Gear has 33 teeth, 17 spline and is 5.075" in Diameter For tractor models FE35, MH50, TO35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 65, 765, FE135 COVENTRY, 2135 TURF UTIL NARROW. (Part No: 180415M1)
$21.35

Gear, 3rd Mainshaft - 41 tooth, 18 spline. Used in 8 speed transmissions. For tractor models 135, 148, 150, 155, 158, 165, 168, 175, 180, 185, 188, 20, 240, 240P, 265, 275, 282, 30, 31, 375, 383, 390, 50H, 550, 565, 575. Replaces 1660094M1. (Part No: 1682690M1)
$75.10

Gear, 4th - 32 teeth, 18 spline, Replaces 1660095M1. For tractor models 1085, 135, 150, 165, 235, 240, 245, 255, 265, 275, 285, 390T. (Part No: 1683360M1)
$81.83

Gear, Reduction - 21 teeth, 39 spline. For tractor models 135, 150, 165, 175, 180, 20F, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 356, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 6500, 6500H, 670, 6800H, 690. (Part No: 897005M1)
$113.39

Gear, Reverse - For tractor models FE35, MH50, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 365, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 65, 765, FE135 COVENTRY, TO35 SN# 17159>, 2135 TURF UTIL NARROW. This Gear is for a 8 Speed trans. with 13 and 21 teeth. (Part No: 183040M1)
$77.28

Gear, Transmission - 45 tooth, 20 spline. For tractor models 175, 270, 275, (240 constant mesh ratio 1.88), (290 Hi clearance), (165, 255, 265 Row crops), (282 SN# up to 3K-D25608H), 20C turf. (Part No: 906469M1)
$80.14

Gear, Transmission Pinion, 4th - 32 tooth. For tractor models (1085, 165, 235, 240, 245, 250, 255, 265, 270, 275, 283, 285, 298, 390T all with 8 speed transmission). (Part No: 1868010M1)
$129.97

Gearshift Lever - For tractor models FE35, 135UK, 150, 165, 175, 20D, 230, 235, 245, 255, 265, 275, 285, 30, 30E, 40, 40E, (20F SN# 50101A0192 and up). Replaces 891405M1, 194550M3. (Part No: 1673814M2)
$36.51

Gearshift Selector - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50C, 50D, 50E, 50H. (Part No: 1862868M2)
$28.00

Gearshift Stop Plate - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50B, 50C, 50E, 50H, 670, 690, 698, 699. (Part No: 1860764M3)
$3.99

Gearshift, Retainer Lock - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50B, 50C, 50E, 50H, 670, 690, 698, 699. (Part No: 1860761M1)
$23.55

Main Drive Pinion - For tractor models 148, 168, 175, 185, 188, 20C, 20D, 240, 250, 255, 265, 270, 275, 282, 285, 290, 565, 575, 165 STANDARD TRANS. Main Drive Pinion for 8 speed trans. Pinion is a 24 tooth, 10 spline, 13.750" long. (Part No: 964925M3)
$168.25

Mainshaft - Multi power & 6 speed trans, 18 spline, 12.250" long. For tractor models 1080, 1085, 135, 148, 150, 155, 159, 165, 168, 175, 180, 185, 188, 235, 240, 245, 250, 255, 265, 275, 285, 290, 30, 550, 565, 575, 590, (FE135 Coventry). Replaces 520701M3. (Part No: 1682542M1)
$304.99

Mainshaft - 8 speed trans, 18 spline, 13.50" long. For tractor models 1080, 1085, 1105, 1135, 1155, 135, 148, 150, 155, 158, 165, 168, 175, 180, 185, 188, 20, 20C, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 275, 285, 290, 30, 30B, 30D, 31, 360, 362, 40, 40B, 40E, 50C, 50D, 550, 565, 575, 590. Replaces 1870149M1. (Part No: 1687643M1)
$94.45

Mainshaft, Heavy Duty, 8 Speed Trans. - 22 tooth, 18 spline, 13.375" long, Replaces 1870151M1, 1682448M1. For tractor models 1080, 1085, 135, 148, 155, 158, 165, 168, 175, 180, 185, 188, 240, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 375, 383, 390, 390T, 50E, 50H, 550, 565, 575, 590. (Part No: 1687642M1)
$141.27

Multipower Transmission & Related Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application & availability. NOTE

Oil Seal, Axle - Outer oil seal in rear axle housing, for tractors with wet brakes. For model s:: MF255, MF265 except orchard, MF275, MF285. MF298, MF398, MF399, MF690 to SN# T1301043, MF698, MF699, MF1085 industrials: 30, 30B, 30D, 31, 40, 40B, 50A, 50C, 50D. (Part No: 1860954M1)
$29.84

Pinion Gear - For 135, 148, 150, 155, 158, 168, 175, 185, 188, 20, 240, 240P, 265, 275, 282, 30, 31, 375, 383, 390, 50H, 550, 565, 575. Pinion Gear for 8 speed transmission(28 tooth, 20 splines, 4.350" Diameter). (Part No: 964916M1)
$44.10

Pinion Shaft, Transmission - 17 teeth, 25 splines. For tractor models 135, 148, 150, 155, 158, 165, 168, 185, 188, 20, 20C, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 30, 31, 40, 40B, 50C, 50D. Replaces 1868530M91. (Part No: 1868531M1)
$143.86

Planetary Cover Plate, Front - For the following tractors:1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500 Replaces 180408M2, 180408M1 (Part No: 180408M2)
$14.94

Planetary Cover Plate, Rear - For the following tractors:1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500 (Part No: 184012M4)
$18.11

Planetary Pinion Gear - 18 teeth, epicyclic pinion gear used in 897711M3 carrier. For tractor models 135, 150, 175, 20, 20C, 20D, 20F, 202, 203, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 30, 30B, 30D, 30E, 30H, 302, 31, 3165, 360, 362, 375, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 65, 6500, (155, 158, 165, 265, 275, 285, 290, 550 all with std multipower), (FE135 coventry), (35 SN# 365360 and up), (765 SN# 609714 and up), 2135. (Part No: 897018M1)
$61.08

Planetary Pinion Gear, (Epicyclic) - 12 tooth. For tractor models 135, 150, 165, 175, 178, 180, 203, 205, 20E, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 30H, 3165, 356, 40B, 40E, 4500, 50A, 50C, 50D, 50E, 50H, 5650, 60, 60H, 65, 6500, 6500H, 670, 6800, 690, 85, 88. (Part No: 894769M1)
$49.56

Planetary Ring Gear - 45 teeth. For tractor models 135, 150, 165, 180, 20F, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30A, 30B, 30D, 30E, 30H, 31, 3165, 40, 40B, 40E, 4500, 50, 50C, 50D, 50E, 50H, 60, 60H, 6500, 670, 690. (Part No: 894772M2)
$291.79

Planetary Selector Gearshift - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35 MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. (Part No: 180446M1)
$14.13

Planetary Shift Lever - For 150, 165, 175, 230, 235, 245, 255, 265, 275, 285, 3165. Planetary Shift Lever. (Part No: 894796M1)
$48.02

Seal, Rear Axle, Inner - 3.375" O.D., 2.350" I.D., .890" wide. For tractor models 1080, 150, 165, 175, 178, 180, 30, 31, 40, (135, 235 Orchards), (1085, 255, 265, 275, 285 all with dry brakes). (Part No: 894782M2)
$15.69

Seal, Rear Wheel Axle Shaft, Outer - 4.00"x 2.875"x .375". For tractor models 165, 168, 175, 178, 185, 188, 250, 265, 275, 290, 565, 575, 590, 595, 675, 690, 698. (Part No: 894763M1)
$10.35

Shift Fork, 1st, Reverse, 2nd & 3rd - For tractor models FE35, F40, MH50, TO35, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 202, 203, 204, 205, 2135, 2200, 230, 235, 245, 255, 265, 270, 275, 285, 290, 298, 30, 31, 3165, 35, 50, 65. (Part No: 180437M1)
$41.94

Shift Fork, 4 Speed - For 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 20F, 231, 235, 240, 240P, 245, 250, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 31, 40, 40B, 40E, 50C, 50D, 50E, 50H. Shift Fork - 4 SPEED. (Part No: 1873532M3)
$17.09

Shift Fork, 8 Speed - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 302, 304, 31, 3165, 356, 360, 362, 375, 383, 390T, 398, 399, 40, 40F, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 6500, 670, 690, 698, 699, (FE135 Coventry). (Part No: 897065M2)
$19.99

Shift Fork, 8 Speed - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20E, 20R, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 40, 40B, 40E, 50C, 50D, 50E, 50H. Shift Fork replaces 1862139M1. For 8 Speed. (Part No: 1860773M1)
$51.75

Shift Knob - Hi-low shift knob, for shift levers with 3/8 NF threads. For 20, 20C, 30, 30B, 30D, 31, 40, 40B, 50C, 50D, MF135, MF150, MF165, MF175, MF230, MF235, MF245, MF255, MF265, MF275, MF285 (Part No: 1862399M1)
$2.46

Shift Knob - 4-speed shift knob. For 20, 20C, 30, 30B, 30D, 31, 40, 40B, 50C, 50D, MF135, MF150, MF165, MF175, MF230, MF235, MF245, MF255, MF265, MF275, MF285 (Part No: 532959M1)
$2.46

Shift Rail, 1st & Reverse - Replaces: 180442M2. For the following tractors:1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 220, 2200, 230, 231, 235240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 31, 35, 40, 50, 65, F40, FE135, MH50, TO35 (Part No: 1678867M1)
$38.25

Shift Rail, 2nd & 4th - Shift Rail, 2nd & 4th. Replaces 180438M2 For the following tractors: 135, 138, 148, 155, 158, 165, 168, 175, 178, 185, 188, 230, 240, 250, 265, 275, 285 with 11x38 differential, 290, 340, 35, 350, 355, 360, 362, 365, 375, 390, 390T, 398, 399, 550, 565, 575 with 11x38 differential, 590 with 11x38 differential, 65, 675, 690 with 11x38 differential, 765, FE35. (Part No: 1678866M1)
$34.37

Shift Rail, 3rd - Replaces 1678865M1. For tractor models 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 31, 40, 40B, 50C, 50H, 50E. (Part No: 1678864M1)
$38.11

Transmission Input Shaft - 10 spline. For tractor models 1080, 1085, 150, 165, 175, 180, 255, 265, 275, 285, 65, 30. (Part No: 516523M91)
$295.91

Tube & Socket Assembly - Tie rod tube with end, right hand, inner, includes clamp. 20.125" to center of post, .75" I.D. For adjustable front axle on tractors: MF165 except LP, MF175, MF255, MF265 except orchard, MF275 industrials: 30 turf, 3165 turf. For 30, 3165, MF165, MF175, MF255, MF265, MF275 (Part No: 1028264M91)
$30.41

Electrical System
Alternator - 12 volt, 63 amp. 3 pin. Will replace a 2 pin as the 3rd pin is an accessory. For tractor models (740, 750, 760 1972-73 with 354 dsl), (230 1976-81 with Z145 gas), (230 1975-76 with 152 dsl), (235 1975-76 with Z145 gas), (235 1974-76 with 152 dsl), (245 1977-81 with Z145 gas), (255 1974-76 with 203 dsl), (1974-75 with 212 gas), (265 1974-75 with 236 gas or 1974-76 with 236 dsl), (275 1974-76 with 248 dsl), (285 1973-74 with 236 gas), (285 1973-76 with 318 dsl), (295 1979-82 with 318 dsl), (1085 1973-76 with 318 dsl), (1105 1971-76 with 354 dsl), (1135 1971-76 with 354 dsl), (1155 1974-76 with 540 dsl), (1155 1971-73 with 510 dsl), (1505, 1805 1974-76 with Cat. 3208 dsl). Replaces 1100581, 1100936, 1103117, 1100588, 1100578. (Part No: ADR0239)
$71.69

Alternator - 12 volt, 72 amp. For tractor models (230, 245 1977-82 with 152 dsl), (255, 265 1977-82 with 236 dsl), (275 1977-82 with 248 dsl), (285 1977-82 with 318 dsl), (295 1979-82 with 318 dsl), (1085 1977-78 with 318 dsl), (1105, 1135 1977-78 with 354 dsl), (1155 1977-78 with 540 dsl), (1505 1977-78 with 3208 dsl), (1805 1977-78 with 3208 dsl), (2675, 2705 1981-84 with 354 dsl), (2775, 2805 1981-84 with 640 dsl), (2810, 2830 1982 with 354 dsl, (2850, 2870, 2890 1982 with 540 dsl). Replaces 1102921, 1102920, 1103116, 1103133. (Part No: ADR0133)
$66.17

Electronic Ignition Conversion Kit -12V Negative Ground - For 35, F40, 50 all with Cont Z134 engine & Delco (D)1112643 dist, MF65 with Cont G176 engine & D1112644 dist, 135 Spec with Cont Z145 with D1112643 dist, 135/150 with Cont Z145 & D1112644 dist, 165 with Cont G176 engine & D1112644 dist, 165 with Perkins AG4-212 with D1112458 dist, 175/180 with Cont G206 engine with D1112647 dist, 175/180/185 with Perkins AG4-236 engine with D1112693 dist, MF255 with Perkins AG4-212 engine & D1112458 dist, MF265/MF285 with Perkins AF4-236 engine & D112693 dist. Also works with H-260 Continental Engine.Electronic ignition conversion kit. Replaces points and condenser with an electronic module. For use on 12 volt neg grnd system only. Never change points again. Easy to install. Increase spark plug life and horsepower. Improve fuel economy. (Part No: 1145A)
$77.90

Electronic Ignition Conversion Kit, High Perfomance, 12 Volt Negative Ground - The Ignitor II has many of the same great features that the Ignitor has, but its smarter. It senses the coil current level and use a powerful micro controller to adjust variable dwell which helps to maintain peak energy throughout the entire RPM range. Senses startup and develops more energy for quicker, easier starting. Current protection shuts down the system, preventing component damage. NOTE: Ignitor II applications can not be used with solid core ignition wires, can be used with our ignition wires p/n S.66442. Replaces points and condenser with an electronic module. Use with 12 volt negative ground systems. For tractor models 165 with Cont G176 engine & D1112644 dist, 165 with Perkins AG4-212 with D1112458 dist, 175/180 with Cont G206 engine with D1112647 dist, 175/180/185 with Perkins AG4-236 engine with D1112693 dist, MF255 with Perkins AG4-212 engine & D1112458 dist, MF265/MF285 with Perkins AF4-236 engine & D112693 dist. Also works with H-260 Continental Engine. (Part No: 91145A)
$113.03

Fuse Holder - Fuse holder, chassis mount with threads for securing nut. For tractor models 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 275, 285 industrials: 20, 30, 40, 31, 20C, 30B, 40B, 50C, 3165. Replaces 506063M91. (Part No: 522462M91)
$14.50

Ignition Switch - This ignition & starter switch with keys, has 3 terminals. For gas tractors: 50, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 1100, 1130, 1500, 1800 industrials: 20, 20C, 30, 30B, 40, 2135, 2200, 3165 combine: 410 skid steer loader: 811. For 1100, 1130, 135, 1500, 150, 165, 175, 1800, 180, 20C, 20, 2135, 2200, 230, 235, 245, 255, 265, 30B, 30, 3165, 40, 410, 50, 811. (Part No: 194747M91)
$26.33

Neutral Safety Switch - This Neutral Safety Switch has blade type terminals. For tractors: MF240*, MF250*, MF253, MF282, MF283 except Brazil, MF298*, MF360, MF362, MF375, MF383, MF390, MF393, MF398, MF399 industrial: 40E*. *Optional with 3381094M1. Replaces 888501M2. (Part No: 1679223M2)
$20.93

Neutral Safety Switch - This Neutral Safety Switch is for bullet type terminal. Replaces 181140V94, 53208520, 181140M1, 181140M91, 181140M94, 181140M93, 181140M92. (Part No: 181140M94)
$12.35

Neutral Safety Switch Boot - For tractor models: 35, 40, 50, 65, 85, 175, 180, 230, 235, 245, 255, 265, 275, 285, 20, 20c, 30, 30B, 30D, 31, 40, 40B, 50, 50A, 50C, 50D, 60, 2135, 3165, 22, 2500, 4500, 6500, 88, 135, 150, 165, Super 90, 202, 203, 204, 205, 302, 304. (Part No: 180776M1)
$9.85

Starter Assembly, New - 12 volt, diesel, 10 teeth, 2.7KW. For tractor models MF30, MF50, MF165, MF174, MF174C, MF194, MF265, MF270 MF275, MF285, MF290, 6500, 7500, 8500. Replaces Lucas, 26413, 27411, 27433, 27539, 26410. (Part No: 1868285M3)
$210.45

Starter Drive - For tractor models Super 90, 1100, 1130, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 275, 285, 50, 85, 88, TO35 GAS OR DIESEL, 750 SN# 1696157>, (850, 860 ALL WITH DELCO STARTER 1113676), (203, 205, 410, 510, 540, 550, 760 ALL WITH PERKINS ENGINES) Starter drive used with stater 1113402, 1113672, 1113391. Replaces 1755245M1. (Part No: 1755245M1)
$27.43

Starter Solenoid - Solenoid assembly, flange mounting to starter. Replaces Delco 1114356 on starters 1108649, 1107503, 1107512, 1108649. Gas & diesel applications. 12-volt. Replaces 1025381M91, 1047083M91, 1755027M91. (Part No: 1047083M91)
$10.12

Starter Switch - For tractor models 1080, 1100, 1105, 1130, 1135, 1150, 1155, 135, 150, 165, 175, 180, 2135, 230, 235, 245, 255, 265, 275, 285, 50, all with Perkins Diesel Engines. Starter Switch. 2 Prong. Includes 2 keys. (Part No: 504809M1)
$25.35

Starter, Temperate Climate - Lucas Type for Perkins A4.212, A4.236 & A4.248 Diesel Engines. For MF 165, 175, 185, 265, 275, 290, 298, 362, 365, 375, 390, 390T, 396, 398, 399, 675, 690, 698, 699, 3050, 3060, 3065, 3070, 3075, Ind. 50, 50D, 50E, 50F, 60H. Replaces 1860093M2, 1680064M1. (Part No: S.41143)
$182.16

Switch, Push Button - Fits multiple Massey Ferguson tractors. Replaces 189158M91, 189158V91, 181141M91 (Part No: 189158M91)
$8.56

Voltage Regulator - Internal voltage regulator for MF/Delco alternators on tractors: MF230, MF235, MF245, MF255, MF265, MF275, MF285, MF1085, MF1105, MF1135, MF1155, MF1500, MF1505, MF1800, MF1805, MF2675, MF2705, MF2745, MF2775, MF2805 industrials: 20C, 30B, 30D, 40B, 50C. Replaces 1039664M1 & Delco 1116387. For 20C, 30B, 30D, 40B, 50C, MF1085, MF1105, MF1135, MF1155, MF1500, MF1505, MF1800, MF1805, MF230, MF235, MF245, MF255, MF265, MF2675, MF2705, MF2745, MF275, MF2775, MF2805, MF285 (Part No: 1052023M91)
$7.15

Engine Bearings
Main Bearings .010, Perkins 236 & 248 Diesel - For tractor models 6500, 31, 50C, 175, 180, 255, 265, with A4-236 Direct Injection Perkins Diesel), (275 with Engine SN# Serial Number Prefix 248UA or LF---N or LF---U only, with A4-248 Direct Injection Perkins Diesl), (290 Early with 4 ring piston, 294-4, 690 prior to engine SN# LF---U839080J, all with A4248 direct injection Perkins Diesel 4 Cylinder. Main Bearings Complete Kit. 4 Pair. (Part No: 735169M91)
$18.00

Main Bearings .020, Perkins 236 & 248 Diesel - For tractor models 6500, 31, 50C, 175, 180, 255, 265, with A4-236 Direct Injection Perkins Diesel), (275 with Engine SN# Serial Number Prefix 248UA or LF---N or LF---U only, with A4-248 Direct Injection Perkins Diesl), (290 Early with 4 ring piston, 294-4, 690 prior to engine SN# LF---U839080J, all with A4248 direct injection Perkins Diesel 4 Cylinder. Main Bearings Complete Kit. 4 Pair. (Part No: 735170M91)
$19.80

Main Bearings, .030, Perkins 236 & 248 Diesel - For tractor models 6500, 31, 50C, 175, 180, 255, 265, with A4-236 Direct Injection Perkins Diesel), (275 with Engine SN# Serial Number Prefix 248UA or LF---N or LF---U only, with A4-248 Direct Injection Perkins Diesl), (290 Early with 4 ring piston, 294-4, 690 prior to engine SN# LF---U839080J, all with A4248 direct injection Perkins Diesel 4 Cylinder. Main Bearings Complete Kit. 4 Pair. (Part No: 735171M91)
$19.80

Main Bearings, STD, Perkins 236 & 248 Diesel - For tractor models 6500, 31, 50C, 175, 180, 255, 265, with A4-236 Direct Injection Perkins Diesel), (275 with Engine SN# Serial Number Prefix 248UA or LF---N or LF---U only, with A4-248 Direct Injection Perkins Diesl), (290 Early with 4 ring piston, 294-4, 690 prior to engine SN# LF---U839080J, all with A4248 direct injection Perkins Diesel 4 Cylinder. Main Bearings Complete Kit. 4 Pair. (Part No: 735168M91)
$18.00

Rod Bearings .010, Perkins 236 & 248 Diesel - For tractor models 6500, 31, 50C, 175, 180, 255, 265, with A4-236 Direct Injection Perkins Diesel), (275 with Engine SN# Serial Number Prefix 248UA or LF---N or LF---U only, with A4-248 Direct Injection Perkins Diesl), (290 Early with 4 ring piston, 294-4, 690 prior to engine SN# LF---U839080J, all with A4248 direct injection Perkins Diesel 4 Cylinder. Connecting Rod Bearings Complete Kit. 4 Pair. (Part No: 736951M91)
$14.70

Rod Bearings .020, Perkins 236 & 248 Diesel - For tractor models 6500, 31, 50C, 175, 180, 255, 265, with A4-236 Direct Injection Perkins Diesel), (275 with Engine SN# Serial Number Prefix 248UA or LF---N or LF---U only, with A4-248 Direct Injection Perkins Diesl), (290 Early with 4 ring piston, 294-4, 690 prior to engine SN# LF---U839080J, all with A4248 direct injection Perkins Diesel 4 Cylinder. Connecting Rod Bearings Complete Kit. 4 Pair. (Part No: 736952M91)
$14.70

Rod Bearings .030, Perkins 236 & 248 Diesel - For tractor models 6500, 31, 50C, 175, 180, 255, 265, with A4-236 Direct Injection Perkins Diesel), (275 with Engine SN# Serial Number Prefix 248UA or LF---N or LF---U only, with A4-248 Direct Injection Perkins Diesl), (290 Early with 4 ring piston, 294-4, 690 prior to engine SN# LF---U839080J, all with A4248 direct injection Perkins Diesel 4 Cylinder. Connecting Rod Bearings Complete Kit. 4 Pair. (Part No: 736953M91)
$14.70

Rod Bearings, STD, Perkins 236 & 248 Diesel - For tractor models 6500, 31, 50C, 175, 180, 255, 265, with A4-236 Direct Injection Perkins Diesel), (275 with Engine SN# Serial Number Prefix 248UA or LF---N or LF---U only, with A4-248 Direct Injection Perkins Diesl), (290 Early with 4 ring piston, 294-4, 690 prior to engine SN# LF---U839080J, all with A4248 direct injection Perkins Diesel 4 Cylinder. Connecting Rod Bearings Complete Kit. 4 Pair. Standard. (Part No: 736950M91)
$14.70

Engine Gaskets
Crankshaft Seal, Front, Lip Type, Perkins 236 & 248 Diesel - For tractor models 31, 6500, 175, 180, 255, 265, (275 engine SN# prefix 248UA or LF---N or LF---U only, (290, 294-4, 690 engine SN# prior to LF---U839080J) all with 236 & 248 CID Direct Injection Perkins DSL.Injectors at angle in cylinder head. (Part No: 1447690M1)
$9.00

Crankshaft Seal, Rear, Lip Type, Perkins - Used on Perkins engines AG3-152, AD3-152, AD4-203, A4-236, A4-248, A4-318. For tractor models 135, 150, 20, 40, 2500, 230, 235, 4500, 200B, 245, 20C, 30B, 250 with engine SN# prefix CE22488U or CE31089U, 65, 165, 255, 30, 40B, 50, 302, 304, 356, 3156, 300, 175, 180, 265, 31, 6500, 275 with engine SN# prefix 248UA or LF---N or LF---U, 290 early with 4 ring piston, 294-4, 690 prior to engine SN# LF---U839080J, 285, 1080, 1085, 540. (Part No: 1447049M91)
$17.49

Crankshaft Seal, Rear, Rope Type, Perkins - For tractor models 175, 180, 255, 265, 275, 31, 50C, 6500 all with 236 or 248 CID Direct Injection Perkins DSL.Injectors at angle in cylinder head. Sold in quantities of 2, price is for 1. (Part No: 735942M1)
$4.60

Front Cover To Timing Gear Housing Gasket - ** Must be ordered in qty of 2, price is for 1. For tractor models 165, 1745, 175, 180, 184-4, 220, 24, 25, 255, 265, 270, 274-4, 275, 282, 283, 285, 290, 294-4, 300, 3050, 3060, 3070, 31, 362, 375, 383, 390, 670, 6800H, 6830, 6830C, 6830FC, 6860, 6870, 6880, 690, 7830, 7830C, 7860, 7870, 8530F, 8830, 8860, 8870, 8880. Replaces 36813137. ** Must be ordered in qty of 2, price is for 1. (Part No: 734887M1)
$9.83

Gasket Set, Engine Bottom, Perkins 236 and 248 Diesel - For tractor models 31, 50C, 6500, 175, 180, 255, 265 (275 with Engine SN# prefix 248UA or LF---N or LF---U Only), all with A4-248 Direct Injection Perkins Engine. Engine Bottom Gasket Set. Does not include Crankshaft Seals. Use with top set #3638661M91. (Part No: 747191M91)
$44.39

Gasket Set, Engine Top, Perkins 236 and 248 Diesel - Gasket Engine Top Set - For (175, 180, both with Engine SN# prior to 236UA109215L), (255 and 265 SN# 236UA109215L and up), (275 with Engine SN# prefix 248UA or LF---N or LF---U Only), all with A4-248 Direct Injection Perkins Engine. Engine Top Gasket Set. Does not include Crankshaft Seals. Use with bottom set #747191M91. (Part No: 3638661M91)
$51.49

Oil Seal - For tractor models 30, MF1085, MF255, MF265, MF275, MF285. (Part No: 833355M1)
$8.14

Timing Gear Housing Gasket - For tractor models 165, 1745, 175, 180, 194-4, 220, 255, 265, 270, 274-4, 275, 282, 283, 285, 290, 294-4, 30, 300, 3050, 3060, 3070, 31, 375, 383, 390, 50C, 50D, 50E, 50H, 60, 6500, 670, 6830, 6830C, 6830FC, 690, 7830, 8530F. Replaces 36814127, 36814123. Must be ordered in qty of 2, priced each (Part No: 742474M1)
$11.13

Engine Rebuild Kits
Basic Engine Kit, Perkins 236 Diesel - Made by TISCO. For tractor models 31, 175, 180, 265 & 6500 both with Engine S-N prior to 236UA109215L using A4-236 Direct Injection Perkins Diesel 3.875" standard bore, with injectors at angle in cylinder head. Kit Contains sleeves, pistons, rings, pins & retainers. Pin Bushings. Complete Gasket Set and crankshaft seals.Engine bearings and thrust washers not included, must be ordered separately. Please see "engine bearings". (Part No: BEKP178-LCB)
$443.75

Basic Overhaul Kit, Perkins 236 Diesel - Made by TISCO. 236 CID 4 cylinder diesel engine, 3.875" standard bore, injectors at angle in cylinder head. Basic Engine Kit. Contains sleeves, pistons and rings, pins and retainers, pin bushings, gasket sets, and crankshaft seals. For 50C, 6500, MF255, MF265. Bearings and thrust washers must be ordered separately. Please see "engine bearings". (Part No: BEKP2178-LCB)
$442.44

Engine In-Frame Kit, Perkins 236 Diesel - Made by TISCO. For tractor models 31, 175, 180, 265 & 6500 both prior to engine SN# 236UA109215L. Perkins A4-236 diesel, direct injection, 3.875" standard bore, injectors at angle in cylinder head. Basic In-Frame Engine Kit includes: Sleeve and Piston Kit with Rings, Pins and Retainers, top engine gasket set and Oil Pan Gasket. PISTON PIN BUSHINGS REQUIRE HONING TO FIT PINS. (Part No: BIFP178)
$379.04

Engine Overhaul Kit - Made by TISCO. For 175, 180, 265 with Engine SN# prior to 236UA109215L using A4-236 Direct Injection Perkins Diesel with injectors at angle in cylinder head. Engine Overhaul Kit. Contains Sleeve & Piston Kit: sleeves, pistons, rings, pins & retainers. Pin Bushings. Complete Gasket Set. Connecting Rod Bearing Kit. Main Bearing Kit. Specify when ordering in comments section of order form main bearins sizes available in Standard, .010, .020, or .030 undersize and rod bearing sizes available in Standard, .010 or .020 undersize. Thrust washers are not included and ordered seperately if needed. (Part No: EOK178)
$614.43

Engine Overhaul Kit, Perkins 236 Diesel - Made by TISCO. For tractor models 31, 175, 180, 265 & 6500 both with Engine S-N prior to 236UA109215L using A4-236 Direct Injection Perkins Diesel, 3.875" standard bore with injectors at angle in cylinder head. Engine Overhaul Kit less bearings. Contains Sleeve & Piston Kit: sleeves, pistons, rings, pins & retainers. Pin Bushings. Complete Gasket Set, crankshaft seals, intake & exhaust valves, valve keys, springs. Engine bearings and thrust washers must be ordered separately. Please see "engine bearings". (Part No: EOK178-LCB)
$552.90

Engine Overhaul Kit, Perkins 236 Diesel - Made by TISCO. For tractor models 50C, 6500, 255, 265 with A4-236 Direct Injection Perkins(Injectors At Angle In Cylinder Head) DSL Eng. SN# 236UA109215L and up. Kit Contains Sleeve & Piston Kit: sleeves, pistons, rings, pins & retainers. Pin Bushings. Complete Gasket Set. Intake and exhaust valves, valve keys, and springs. Engine bearings and thrust washers must be ordered separately. (Part No: EOK2178-LCB)
$551.59

In-Frame Kit, Perkins 236 Diesel - Made by TISCO. For tractor models 6500, 50C, MF255, MF265 Engine SN# 236UA109215L and up. Perkins A4-236 diesel, direct injection. Basic In-Frame Engine Kit includes: Sleeve and Piston Kit with Rings, Pins and Retainers, top engine set and Oil Pan Gasket. (Part No: BIFP2178)
$392.44

Engine Parts
Balancer Unit with Oil Pump - For tractor models 1745, 175, 180, 184-4, 220, 24, 255, 265, 270, 274-4, 275, 282, 283, 285, 290, 3070, 31, 50, 50C, 50H, 60, 60HT, 6500, 6500H, 670, 6800H, 6830, 6830C, 690, 7830, 8830. Replaces 41733082. (Part No: 746432M91)
$344.93

Camshaft - Camshaft for Perkins diesel engines. For A4-236 in tractors: MF174-4S to engine SN# U08336N, 175 engine SN# 236-UA19817 & up, 180 engine SN# 236-UA19817 & up, MF184-4, MF255, MF265, MF270, MF274-4, MF670; Industrials: 31, 50D, 50E. For A4-248 in tractors: MF194-4, MF275, MF290, MF690; Industrial 50C. Replaces Perkins 31415321. (Part No: 736818M1)
$122.68

Camshaft Gear - 56 tooth. For tractor models 1100, 1130, 1745, 180, 184-4, 220, 255, 2640, 2675, 270, 2705, 274-4, 282, 283, 285, 294-4, 30, 300, 3050, 3060, 3070, 3505, 3525, 3545, 3630, 399, 470, 50C, 50D, 50E, 50H, 60, 6500, 670, 699, 80, 850, 860, (165, 168, 175, 178, 185, 188, 265, 275, 290, 565, 575, 590, 690 all with engine A.212, A4.236 or A4.248). Replaces 31171353. (Part No: 736254M1)
$66.38

Connecting Rod - For tractor models 1014, 1100, 1114, 165, 168, 174-4S, 175, 178, 185, 194, 255, 2620, 2645, 265, 2675, 274, 275, 285, 290, 3060, 3080, 3090, 3095, 362, 365, 373, 375, 377, 387, 390, 393, 396, 397, 399, 590, 690, 699 all with A4.212, A4.236, A4.248 or A6.354 engines. Replaces M7BJ0015, VPB6002, 02100013, 02101440, 3637034M1, 3637034M91, 6005000118, 676879, 736595M91, 738713M91, 747007M91, 84920, ZZ90009 (Part No: ZZ90009)
$78.72

Crank Gear - 28 teeth. Do NOT use on build no: LE70089, LE22376, LE80173. For tractor models 1007, 165, 168, 174-4S, 175, 178, 184-4S, 185, 188, 194, 194-4F, 255, 265, 274, 274S, 275, 284S-4S, 285, 290, 294S-4S, 3050, 3065, 3070, 30D, 3370, 362, 365, 373, 375, 377, 383, 387, 390, 393, 397, 398, 50, 50B, 50C, 50D, 50E, 565, 575, 590, 6000, 60H, 675, 690, 698, 698T. All with either A4.121, A4.236 or A4.248 Perkins engines. Replaces 734749M1, 73479M1, 734749M1. (Part No: 31171681)
$59.20

Crankshaft Pulley - Crankshaft Pulley is for tractor models 180, 184-4, 255, 265, 274-4, 275, 282, 294-4, 50C, (60 late production), (165 South Africa only), (175 with diesel engine). Replaces 31148791, 31148792, 31148797, 31148798, 31154612, 3637520M1, 734812M1, 735506M1. (Part No: 3638318M1)
$68.86

Cylinder Head - This cylinder head comes with valves, springs, guides and retainers, installed. Replaces 737772M1, 742803M91, 742805M91, 748400M91, 3637486M91. For tractor models 165, 168, 174-4S, 175, 178, 184-4S, 185, 188, 194-4S, 240, 265, 274, 274S, 274SK, 275, 284-4S, 284S, 285, 290, 294-4S, 294S, 3050, 3060, 30D, 362, 362N, 365, 372, 373, 375, 377, 382, 382N, 383, 387, 390, 393, 397, 440, 50, 50B, 50D, 50E, 50EX, 50H, 50HX, 565, 575, 590, 60H, 675, 690. All the above with either A4.212, A4.236, or A4.248 4 cylinder diesel engines. (Part No: 3640877M91)
$847.31

Cylinder Head - For tractor models 175, 180, 20, 255, 265, 275, 31, 40 all with Perkins A4.236 & A4.248 Diesel Engines. Cylinder Head includes Valves, Guides and Springs, assembled. Replaces ZZ080054, 743112M1. (Part No: 3637486M1)
$847.98

Flywheel Gear, Perkins Engines - Flywheel ring gear. For Perkins engine in tractors: MF35, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF235, MF255, MF265, MF275, MF383 industrials: 20, 30, 40, 50. 115 teeth, 13-7/16" I.D. Replaces 410236. For 20, 30, 40, 50, MF135, MF150, MF165, MF175, MF180, MF235, MF255, MF265, MF275, MF35, MF383, MF50, MF65. (Part No: 731008M1)
$26.23

Flywheel Plate - For tractor models 20C, 20, 30B, 30D, 30, 40B, 40, MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF255, MF265, MF35, MF50, MF65, TO35 (Part No: 1040886M1)
$79.52

Flywheel Ring Gear Nut - NUT, Ring Gear to Case - Use with BOLT 825776M1. **MUST BE ORDERED IN MULTIPLES OF 12, priced each.** For model s- 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 135, 150, 1500, 1505, 165, 175, 1800, 1805, 20, 202, 203, 204, 205, 20C, 2135, 220, 2200, 230, 231, 235, 240P, 245, 2500, 255, 265, 275, 282, 283, 285, 30, 302, 304, 3050, 3060, 3070, 3080, 3090, 30B, 30D, 31, 3120, 3125, 3140, 3165, 320, 350, 3505, 3525, 3545, 356, 3630, 3650, 3655, 3660, 3680, 40, 40B, 4500, 50, 50C, 50D, 50H, 60, 65, 6500, 6500H, 690, 698, 699, 70, 80, 85, 88, Super 90, F40, FE135, TO35. **MUST BE ORDERED IN MULTIPLES OF 12, priced each.** (Part No: 891947M1)
$1.18

Gear, Idler - 63 tooth. For tractor models 165, 168, 1745, 175, 178, 180, 184-4, 185, 188, 220, 255, 265, 270, 274-4, 275, 282, 283, 285, 290, 294-4, 30, 300, 3050, 3060, 31, 50C, 50D, 50E, 50H, 565, 575, 590, 60, 6500, 670, 6830, 6830C, 6830FC, 6860, 6870, 6880, 7830, 7830C, 7860, 7880, 8530F, 8830, 8860, 8870, 8880, (675, 690 early models with engine A4.212 or A4.248 engine), 910. Replaces 41115023. (Part No: 734738M91)
$98.96

Heater, Engine Block - For tractor models 135, 180, 235, 265, 275, 285, 35, 50, 65, 85, 88, Super 90. Engine Block Frost Plug Heater has 3/4 inch NPT, is 400 Watt, used with MF Engine Heater Adapter #191184M1 (which we do not have available). (Part No: 773323M1)
$50.25

Lifter, Refaced - For tractor models: 175, 180, 184-4, 265, 275 4-cylinder Diesel, 1105, 1135, 1155 6-cylinder Diesel all with casting number 740671M1. (Part No: R1188630)
$12.89

Thrust Washer, Lower, Perkins Diesel - Tabbed off center. For tractor models (175, 180 engine SN# 4812575 and up), 265, 31C, 6500, 255, (275 engine SN# prefix 248UA or LF---N or LF---U only), (290, 294-4, 690 engine SN# prior to LF---U839080), 50C. Sold in quantities of 2, price shown is for 1. (Part No: 747129M1)
$6.51

Thrust Washer, Upper, Perkins Diesel - For tractor models (175, 180 engine SN# 4812575 and up), 265, 31C 6500, 255, (275 engine SN# prefix 248UA or LF---N or LF---U only), (290, 294-4, 690 engine SN# prior to LF---U839080), 50C. Sold in quantities of 2, price shown is for 1. (Part No: 747128M1)
$6.51

Valve Keys, Pair, Perkins Diesel - For tractor models 6500, 31, 175, 180, 265, 255, 50C, (275 engine SN# prefix 248UA or LF---N or LF---U) only, (290, 294-4, 690 all with engine SN# prior to LF---U839080). Price shown is for 1 pair, must be ordered in quantities of 4. (Part No: 736453M1)
$4.71

Valve Overhaul Kit, Perkins 236 & 248 Diesel - Valve overhaul kit. Contains intake and exhaust valves, springs, and keys. For 31, 50C, 6500, MF175, MF180, MF255, MF265, MF275, MF290, MF294-4, MF690 (Part No: VOKP236)
$106.84

Valve Service Kit - For tractor models 31, 50C, 6500, MF175, MF180, MF255, MF265, MF275, MF290, MF294-4, MF690. Contains: springs, guides, locks, (no valves). (Part No: VSKP236)
$55.13

Valve Spring, Inner, Intake & Exhaust, Perkins Diesel - For tractor models 6500, 31, 175, 180, 265, 255, 50C, (275 engine SN# prefix 248UA or LF---N or LF---U) only, (290, 294-4, 690 all with engine SN# prior to LF---U839080). Price shown is for 1, must be ordered in quantities of 4. (Part No: 735525M91)
$3.34

Valve Spring, Outer, Intake & Exhaust, Perkins Diesel - For tractor models 6500, 31, 175, 180, 265, 255, 50C, (275 engine SN# prefix 248UA or LF---N or LF---U) only, (290, 294-4, 690 all with engine SN# prior to LF---U839080). Price shown is for 1, must be ordered in quantities of 4. (Part No: 735521M1)
$4.07

Valve, Exhaust, Perkins 236 & 248 Diesel - Exhaust valve, stellite, replaces 741257M1. For tractor models 6500, 31, 175, 180, 265, 255, 50C, (275 engine SN# prefix 248UA or LF---N or LF---U) only, (290, 294-4, 690 all with engine SN# prior to LF---U839080). Price shown is for 1 must be ordered in quantities of 2. (Part No: 747552M1)
$14.92

Valve, Intake, Perkins 236 & 248 Diesel - For tractor models 6500, 31, 175, 180, 265, 255, 50C, (275 engine SN# prefix 248UA or LF---N or LF---U) only, (290, 294-4, 690 all with engine SN# prior to LF---U839080). Price shown is for 1 must be ordered in quantities of 2. (Part No: 739027M1)
$9.16

Engine Pistons and Sleeves
Piston, Perkins 236 Diesel - 236 CID 4 cylinder diesel engine, 3.875" standard bore. Piston with pin Oil groove holes 10 top, 12 bottom. For 31, 50C, 6500, MF175, MF180, MF255, MF265 (Part No: 735187M91)
$67.27

Piston, Perkins 236 Diesel - Piston with pin; oil groove holes 8 top, 8 bottom. For tractor models 50C, 255, (6500, 265 engine SN# 236UA109215L and up. (Part No: 743110M91)
$58.99

Sleeve and Piston Kit, Perkin 236 Diesel - For tractor models 31, 175, 180, 265 & 6500 both prior to engine SN# 236UA109215L, all with A4-236 Direct Injection Perkins Diesel, 3.875" standard bore. Sleeve and Piston Kit includes sleeves, pistons and rings, pins and retainers. (Part No: PK78)
$330.29

Sleeve and Piston Kit, Perkins 236 Diesel - For tractor models 50C, 6500, 255, 265 all engine SN# 236UA109215L and up, all with A4-236 Direct Injection Perkins Diesel. Sleeve and Piston Kit includes sleeves, pistons and rings, pins and retainers. (Part No: PK79)
$338.38

Sleeve, Perkins 236 Diesel - Cylinder liner. 236 CID 4 cylinder diesel, 3.875" standard bore, injectors at angle in cylinder head. For tractor models 31, 50C, 6500, 750, 760, MF1100, MF1105, MF1130, MF1135, MF175, MF180, MF255, MF265 (Part No: 736507M3)
$43.17

Engine Rings
Ring Set 1 Cylinder, Perkins 236 Diesel - Ring set, for 1 piston. Can replace 738404M91 & 745769M91. For 31, 50C, 6500, MF1100, MF175, MF180, MF255, MF265 (Part No: 836583M91)
$38.79

Exhaust System
Exhaust Elbow - For A4-236/A4-248 DIESEL engines in tractors: 255, 265, 275, INDUSTRIALS: 50C, 50D. (Part No: 533446M2)
$83.64

Exhaust Elbow - For tractor models 24, 265S, 270, 275, 283, 298, 362, (168, 175, 178, 185, 188, all A4l236/A4.248) 165 with A4.212 Engine, (290, 575, 590, all with Engine Types A4.235, A4.248 ALL with exhaust Outside Hood) (Part No: 1862807M1)
$28.20

Exhaust Manifold, Horizontal - For tractor models 175, 180, 255, 265, 275, 50C. Exhaust manifold. (Part No: 734700M1)
$100.85

Inlet Manifold - For 255, 265, 270, 275, 283, 290, 362, 50C, 50D, 50E, 50H, 60H, 6500H, ) (24, 25 all Handler). Inlet Manifold. (Part No: 37787654)
$101.60

Manifold - Vertical Exhaust for 255, 265, 275, 50C, 50D with Perkins 4.236 or 4.248 Diesl Engine. (Part No: 741764M1)
$189.53

Manifold - Vertical Exhaust For 255, 265, 275, 50C, 50D with Perkins4.236 or 4.248 Diesel Engine. Replaces OEM# 741764M1. (Part No: R2011)
$160.77

Muffler - Horizontal Exhaust Inlet I.D. - 1 3/4" Outlet O.D. - 1 3/4" Overall Length - 39" For MF135 (U.K.), (150, 165, 175, 180 with Perkins Engine) 230, 240, 245, 250 with Gas or Diesel Engine. (245, 255, 265, 275 with Diesel Engine). OEM# 539523M92, 539525M91, 890476M92. (Part No: 539523M92)
$79.90

Muffler - For tractor models 235, 245, 255, 265, 275. Replaces 578090M1. 2 3/4 inlet length, 2 1/8 inlet I.D., 23 shell length, 8 1/2 outlet length, 2 inch outlet O.D., 34 inch overall length. (Part No: 578090M92)
$117.81

Muffler - A= 16" inlet length, B= 2.125" inlet I.D., C= 20.50" shell length, D= 13" outlet length, E= 2.25" outlet O.D., F= 49" overall length. For tractor models 265, 275, 290, 30D, 362, 362N, 372, 382, (382N SN# B18009 and up), 565, 575, 590. Replaces 1675390M91 1675390M92, 1673835M91, 1673835M92. (Part No: 3772138M1)
$129.02

Muffler, Horizontal - Round body, 8" inlet length, 1-3/4" inlet I.D., 24" shell length, 7" outlet length, 1-3/4" outlet O.D., 39" overall length. For tractor models 135 UK with Perkins gas or diesel engine, (245, 255, 265, 275 all with diesel engine), (230, 240, 250 all with gas or diesel engine). (150 with Perkins gas or diesel engine). (Part No: 539525M91)
$46.40

Weathercap - Fits 2" pipe. For tractor models MF135, MF150, MF245, MF255, MF265, MF275, MF35. (Part No: WC4)
$6.51

Fuel System / Air Intake
Carburetor Kit, Basic - Kit for Zenith 13338, 12548, 13337, 13316, 13372, 13795, 133378 carbs used on 135, 165, 175, 180, 20, 235, 245, 255, 265, 30, 65. (Part No: Z104)
$31.97

Fuel Bowl, Short - This Glass Fuel Filter bowl has a 3 5/8 inch outside diameter, is 1 3/4 inches tall, and a 3/4" bottom hole. It is used on Massey Ferguson 230, 231, 235, 240, 245, 250, 255, 261, 265, 270, 275, 282, 283, 290, 670, 690, 154-4, 174-4S, 184-4S, 194-4F, 20C, 20D, 254-4, 274-4, 294-4, 30B, 30D, 30E, 40B, 50C, 50D, 50E. Replaces original part numbers 1039071M1, 1890147M1, 3638268M1, 3907536M1. (Part No: 1039071M1)
$3.89

Fuel Filter - Fuel filter element, external body type. 4-3/8" high. For tractors: MF230, 235, 245, 255, 265, 270, 275, 282, 283UK, 283 Brazil, 290, 360, 375, 383, 390, 390T, 398, 670, 690, 2745, 2775, 2805, 3050, 3060, 3070, 3505, 3525, 3545, 3630, 3680, 3690 industrials: 20C, 30B, 30D, 30H, 40B, 50C, 50D, 50E, 50F, 50HX, 60H forklifts: 4500, 6500. Can replace Perkins 26560602, 1896287M91. (Part No: 3405419M1)
$6.98

Fuel Filter Assembly, Single - This is a single filter assembly with glass bowl. Ports are 1/2" x 20 pitch. Includes bleeder port and screw. For tractor models (1100 SN# up to 8838067), (1130 SN# up to 88T0173), (135 SN# 9A10311 and up), (150 SN# 9A24714 and up), 165, 175, 180), (35 SN# 240398 and up), (35 Turf, 35 Utility both SN# 655000484 and up), (50 SN# 535223 and up), (65 SN# 697565 and up), (Super 90 SN# 6906208 and up), (2135 Utility & Turf SN# up to 9A10311), (300 SN# up to 29E7574), (410 SN# up to 6909990), (510 SN# 8823113 Thru 8838).(INDUSTRIAL/CONSTRUCTION: 20, 203, 205, 2200, 2500, 30, (302 SN# 119700021 and up), (304 SN# 119750021 and up), 31, 3165), 40), 50, 50A). Replaces original part numbers 1447072M91, 1876507M91, 193229M91, 193239M91, 3597838M91, 883786M91 (Part No: 1446017M91)
$27.38

Fuel Injection Pump - For tractor models 265, 275, 261, 270, 670, 50E, 50H, 60H. Replaces 1447175M91 and CAV3241F350. (Part No: 1447170M91)
$725.84

Fuel Injection Pump - For tractor models 175UK, 178, 194, 265, 385, 294, 50E, 50H, 60H. Replaces 1446874M91, CAV3241F101, 102, 103, 104. (Part No: 1446875M91)
$720.81

Fuel Injector - For 50C, MF175, MF180, MF265. Replaces: (1446761M91 Used Engine Serial Number 236UA43100 And Up) and (734722M91 Used Prior To Engine Serial Number 236UA43100). (Part No: 1446761M91-EX)
$44.92

Fuel Lift Pump - Fuel pump for A4-236 & A4-248 diesel engines, four-hole mounting. WITH CAM LEVER POINTING AT YOU FUEL INLET IS AT 4 O-CLOCK & FUEL OUTLET IS AT 11 O-CLOCK. IF YOU NEED A PUMP WITH INLET AT 8 O-CLOCK AND FUEL OUTLET AT 4 O-CLOCK USE PART # 2641728. For tractors: MF175 engine SN# 236UA57083 & up, MF180 engine SN# 236UA57265 & up, MF184-4, MF255, MF265, MF270 early production, MF274-4 to tr. SN# 221N00936, MF275, MF294-4 to tr. SN# 2230003. Replaces 1447017M91, 1447688M91, 3637290M91, 3637300M91, 3637444M91, 3640785M1, 3641402M91, 375839X1, 376522X1, 4222091M91, 4222108M91, 740861M1, U5T0059, 3637300M1 (Part No: 3637300M91)
$27.75

Fuel Pump Assembly, Diesel - 4 hole mounting, For the following models with diesel engines: MF175, MF180, MF265, MF362, MF396, (MF399 with A6-354.4 eng., 1006.6 eng.), MF699, MF2640, MF2675, MF2705, MF2745, MF3090, MF3095, MF3120, MF3125, MF3140, MF3505, MF3525, MF3545, MF3630, MF3645, MF3650, MF3655, MF3660, MF4245, MF4255, MF4260, MF4263, MF4265, MF4270, MF4360, MF4370, MF4800, MF4900, MF6100, MF6120, MF6150, MF6170, MF6180, MF6190, MF6270, MF6280, MF6290, MF8100, MF8210, MF8220, 550, 750, 760, 850, 855, 860, 865, 6500. (Part No: 4222105M91)
$34.37

Fuel Shut Off - Fuel shut-off & strainer. For odels: 165, 168, 175, 178, 185, 188, 265, 270, 275, 282, 285, 290, 298, 50E, 50F, 50H, 565, 575, 590, 60H, 6500, 675, 6800H, 690. All with either A4.212, A4.236, A4.248 engines. Replaces 890438M1. (Part No: 898580M91)
$6.29

Fuel Shutoff Cable - 47" total length. For tractor models 1080, 1085, 165, 175, 255, 265, 275. (Part No: 511414M1)
$18.97

Fuel Tank - For 255 after SN# 9A282760, 265 after SN# 9A282759, 275 after SN# 9A284893, 40B after SN# 9A282759, 50C after SN# 9A282766 and 50D. Tanks is overall length of 29 3/8 inches. It has been reported some of the original tanks are 3 inches shorter and this tank may not fit your tractor. (Part No: 579012M92)
$207.98

Fuel Tank Mounting Bushing - For tractor models 165, 168, 175, 178, 185, 188, 265, 270, 275, 285, 290, 298, 30D, 30E, 392S, 50, 50B, 50D, 60H, 283 UK. (Part No: 883623M1)
$4.49

Heater Plug - Heater Plug Thermostat Burner with Thread Connector. Also replaces 13H2468 and 2666103. For 1007, 1014, 1114, 1134, 1250, 135, 148, 165, 168, 174, 175, 178, 185, 188, 20B, 20D, 20E, 20F, 230, 240, 250, 255, 265, 274SK, 275, 285, 290, 3050, 3060, 3065, 3070, 30D, 30E, 30H, 35, 350, 353, 355, 360, 363, 365, 373, 375, 377, 383, 387, 390, 390T, 393, 397, 398, 399, 40E, 50, 50B, 50D, 50E, 530, 535, 550, 560, 565, 575, 590, 60H, 65, 660, 665, 675, 690, 698, 699, 800, 805, 820, 825, 830, 835, 840, 845. (Part No: 893501M1)
$13.34

Injection Pump - This injection pump fits Perkins AD4.236 engines. For tractor models MF175, MF180, MF255, MF265, MF270, MF275, MF6070, Industrials MF6500, MF31, MF50C, MF50D. Replaces 1447267M1, CAV3241F360. (Part No: 1446876M1)
$726.51

Injector Nozzle - For tractor models 174-4S, 184-4, 261, 265, 270, 274-4, 3050, 362, 374S, 375, 384S, 670, 50C, 50D, 50E, (6500 forklift SN# 236UA112128L and up), 6500H Forklift, 6800H Forklift. Replaces BDLL150S6705. (Part No: 1447227M1)
$31.58

Injector Shield - This injector shield is used on Perkins Diesel engines. Three or more used depending on the application. Replaces original part numbers 33817114, 732824M1 (Part No: 732824M1)
$1.58

Gauges
Fuel Gauge - For tractor models (20D, 20F, 230, 235, 240, 245, 250, 253, 255, 260, 265, 275, 285, 290, 298, 30E, 40E, 50B, 50D, 50E, 50F, 550, 565, 575, 590, 595), (2620, 2640, 2680, all with SN<271212), 50, SN# 87500>. Fuel Gauge. 2" Body Diameter. (Part No: 1877717M92)
$22.68

Tach Cable - Tachometer cable assembly, 53". For tractor models MF85 diesel, MF88 diesel, MF255 early production with A4-326 diesel, MF265 diesel to SN# 9A349238, MF275, MF285 to SN# 9A349238. industrials: 50C, 320 Skidder. (Part No: 544198M91)
$35.80

Tachometer Cable - 56" total length. For tractor models (85, 88, Super 90 diesel), (265 diesel up to SN# 9A349238), (275 with horizontal exhaust), (285 up to SN# 9A349238), 50C. (Part No: AM3131T)
$29.25

Tachometer Cable Gearbox - For tractor models 1080, 165, 168, 175, 178, 185, 188, 265, 275, 285, 290, 298, 565, 575, 590, 595, 675, 690, 698, 698T, 699. Tachometer Cable Gearbox with Cable end 1/2 (Part No: 1446059M1)
$29.85

Tractormeter Drive with Gasket - A=7/8" UNF. For tractor models 255, 265, 275, 285, 1085, 1155, 2640, (2675 SN# 9R1551 and up), 2705, 2745, 2775, 805, 3505, 3525, 3545, 50C, 50D, 60. (Part No: 535126M93)
$39.48

Tractormeter Drive with Gasket - 1/2"dia. UNF thread. For tractor models 154-4, 165UK, 184-4, 194-4F, (240 with eng CE31244), 165 UK, 253, 254-4, 261, (265 up to SN# 9A349239), 270, 274-4, 282, 283, 283 UK, 290, 294-4, 298, 362, 375, 383, 390, 390T, 398, 670, 690, 698, 699, 50E, 50F, 50H, 60H. Replaces 2758346. (Part No: 1853144M1)
$28.53

Hitch / Drawbar
Beam, Center Link - For tractor models 135, 165, 175, 180, 235, 240 SN# 522354-A20286, 245, 250, 255, 265, 298, 362, 375, 390, 398, 399. (Part No: 1863393M92)
$91.40

Draft Control Lever Assembly - Fits the following TRACTORS: 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 2805, 282, 283, 285, 290, 360, 362, 375, 383, 390, 670, 690, FE135 Coventry. Also fits the following INDUSTRIALS: 20, 202, 203, 204, 205, 20 (C, D, F, ), 2135, 2200, 40, 50(C, D, E, ). (Part No: 1660324M91)
$39.00

Drawbar, Swinging - Swinging Drawbar is 35.75 inches in length, 2 inches wide, 1.125 inches thick. Also replaces 184611M1. Three 1.032 inch diameter holes at 1.25, 3.25, and 3.25 inches from front. For model s:130, 135, 150, 165, 202, 205, 20C, 235, 245, 255, 265, 275, 30B, 35, 40B, 50, 65, TO35. (Part No: 531468M1)
$101.91

Fork - Fork, leveling box, extra heavy-duty, for 1" shaft. Used with extra heavy-duty leveling box 8907649EX-HD on tractors: MF65, MF165, MF175, MF265. Fork can also be used on tractors: MF185, MF275, MF283, MF285, MF375, MF383. For MF165, MF175, MF185, MF265, MF275, MF283, MF285, MF375, MF383, MF65 (Part No: 1861392M3)
$74.37

Fork - Fork, leveling box, heavy-duty, for 1" shaft. Use with heavy-duty leveling box 897649M95. For tractor models MF65, MF165, MF175, MF265. (Part No: 893405M3)
$29.92

Heavy Duty Leveling Box Assembly, Right Hand - For tractor models 65, 165, 175, 265. Heavy Duty Leveling Box Assembly, RH. Has 1" shaft and pinion 14 3/4" Long, includes fork. (Part No: 897649M95)
$79.68

Level Rod Yoke - Left hand rod & yoke assembly, 1" thread, 4-1/4" thread length, 16-1/4" long. For tractors: MF150, MF175, MF180, MF265 std. with 24" rims. (Part No: 505801M91)
$42.84

Level Rod Yoke - Left hand rod & yoke assembly, 3/4" thread, 4-1/8" thread length, 14-7/8" long. For tractors: MF65, MF165, MF235 orch., MF245 orch., MF265, MF275 low-profile with 16" rims. (Part No: 897683M92)
$49.98

Leveling Box Assembly, RH, Heavy Duty, Less Fork - Adjustment from 24.00" to 32.00". For tractor models 175, 185, 265, 270 UK, 275, 285, 375, 383 UK, 390 UK, 393 UK, 398 UK, 50E, (670, 690 France). (Part No: 1864977M92)
$68.83

Leveling Box Gear Housing - For tractor models 135, 148, 150, 165, 175, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 25, 250, 255, 265, 275, 285, 30, 302, 304, 30B, 30D, 30E, 3165, 35, 40, 40B, 40E, 50, 65, 765, F40, FE135, FE35, TE20, TEA20, TO35. (Part No: 193181M1)
$35.92

Lift Arm End, LH - Lift arm end, category I, left hand, 7/8" pin hole. For tractor models 65, 85, Super 90, 165, 175, 180, 255, 265, 270, 275, 283, 290, 375, 383, 390, 390T, 393, 670, 690, 30, 31, 50E. (Part No: 184464M92_)
$42.75

Lift Arm End, RH - Lift arm end, category I, right hand, 7/8" pin hole. For tractor models 65, 85, Super 90, 165, 175, 180, 255, 265, 270, 275, 283, 290, 375, 383, 390, 390T, 393, 670, 690, 30, 31, 50E. (Part No: 184463M92)
$42.75

Lower Lift Arm End Assembly LEFT - For tractor models 65, 85, 88, Super 90, 175, 180, 255, 265, 270, 275, 283, 290, 383, 390, 393, 670, 690. Lower Lift Arm End Assembly, LEFT, Cat II 1 1/8" pin hole. (Part No: 184462M92)
$31.50

Lower Lift Arm End Assembly RIGHT - For tractor models 65, 85, 88, Super 90, 175, 180, 255, 265, 270, 275, 283, 290, 383, 390, 393, 670, 690. Lower Lift Arm End Assembly, RIGHT, Cat II 1 1/8" pin hole. (Part No: 184461M92)
$31.50

RH Hvy Duty Level box Assembly. with Fork - For tractor models 175, 185, 265, 275, 375HD, 50E, (670, 690 ALL FRANCE), (270, 383, 390, 393, 398 ALL UK). Adjustment from 24.000" to 32.000" center to center hole. (Part No: 1863053M94)
$128.57

Response Control Assembly - Fits the following TRACTORS: 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 2805, 282, 283, 285, 290, 360, 362, 375, 383, 390, 670, 690, FE135 Coventry. Also fits the following INDUSTRIALS: 20, 202, 203, 204, 205, 20 (C, D, F, ), 2135, 2200, 40, 50(C, D, E, ). (Part No: 1661918M91)
$27.75

Shaft - Shaft & pinion, leveling box. 15.120" Long, 1.000" Diameter, 5.620" of Thread . For heavy-duty & extra heavy-duty leveling boxes 897649M1 & 897649EXHD. For tractors: MF65, MF165, MF175, MF265. Replaces 1860833M1. (Part No: 1860833M2)
$22.16

Shaft Pinion - Shaft & pinion, leveling box, 12-9/32" long. For tractors: MF65, MF235, MF245, MF265. (Part No: 897680M2)
$13.73

Stabilizer Chains, Set - 1 SET OF 2 stabilizers for ford tractors having an extra link which allows easy attachment to large and small model tractors by uncoupling the clevis and pin and moving up or down one link of the stabilizer accordingly. For tractor models 135, 148, 165, 168, 175, 178, 185, 188, 240, 265, 275, 35, 550, 565, 575, 65, 765, TE20. (Part No: 49A93)
$48.70

Telescoping Stabilizer - For tractor models 250, 251, 253, 255, 261, 265, 270, 275, 283, 285, 290, 298, 360, 375, 383, 390, 390T, 393, 396, 398, 399, 670, 690, 698, 1085. Stabilizer, telescoping arm.. Adjustable from 26 to 35 inches. (Part No: 539881M2TSK)
$45.51

Hydraulic System
Auxiliary Hydraulic Pump - This Auxiliary Hydraulic Pump is for models: 135 UK, 165, 165 UK, 175, 178, 180, 1080, 1085, 235, 240, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 298, 670, 690, 698, 699. Replaces OEM Numbers 1663627M92, 1686765M1, 1686765M91, 1686766M91, 1869458M92, 526099M93, 531604M92, 5316073M92, 531607M92, 531607M93, 886367M95, 886367M96. (Part No: 1663627M92)
$423.63

Center Housing - For tractor models 231, 240, 245 SN# up to 9A349239, 250, 255 SN# after 9A250920, 265, 270, 290, 276 SN# up to T192032, 690 2WD SN# up to T192032, 690 4WD SN# up to T314008, 20C, 20D, 30B with Rear Axle SN# CE17398 and up, 30E, 50C with Rear Axle SN# CE17398 and up, 50F. Center Housing. Part no. stamped on right side. (Part No: 1664511M3)
$955.97

Cover, Heavy Duty - For tractor models 135, 150, 165, 175, 20, 20B, 20C, 202, 203, 204, 205, 230, 235, 245, 255, 265, 275, 30, 302, 304, 40, 50C. Replaces 884612M92, 190861M2, 1870950M91. (Part No: 3761903M91)
$476.10

Diaphram - .779" stud dia. For tractor models 135, 150, 165, 175, 180, 20C, 230, 231, 235, 240P, 245, 255, 265, 282, 285, 298, 30, 30B, 31, 40, 40B, 50C, 698, 699. (Part No: 1860114M91)
$12.62

Hydraulic Diverter Valve - For 1080, 1085, 130, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 31, 3165, 35, 360, 362, 375, 383, 390, 392S, 393, 398, 40, 0B, 40E, 50, 50C, 50D, 50E, 65, 85, MH50, TO35 ALL WITH 3/8" NPT Ports. Fits in place of existing cover plate (180908M1 or 182373M91). Hydraulic supply continues available for lift arms, or two additional ports are available along with a return to tank. Only one supply can be selected at a time with hydraulics isolated in other positions. (Part No: S.60032)
$103.31

Hydraulic Lift Pump - For tractor models 230, 245, 250, 255, 265, 275, 283, 298, 50C, 670, 690, 698, 699), (20C, 30 Ind. all axle SN# FE101> without pressure control), (30B, 40 all axle SN# FF100> without pressure control), (30E, 50E all less auxiliary hydraulic) 240 8/91>. Hydraulic Lift Pump. Replaces 1661616M91, 1672148M92, 1675125M91, 1872449M96. (Part No: 1683301M92)
$550.62

Hydraulic Lift Pump - For MF 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 290, 298, 670, 690, 698, 699, Ind 20C, 20D, 20E, 20F, 30, 30B, 30E, 31, 40, 40B, 40E, 50C. Hydraulic Pump with Pressure Control. Also replaces 1675125M92, 1675126M92, 1868439M98. (60468S) (Part No: 1672251M92)
$703.25

Hydraulic Lift Pump Rebuild Kit - Repairs OEM pump. Replaces OEM Kit # 1810860M91. Chamber has 4 holes. Bottom hole = 1/2 inch. For tractor models 135, 165, 230, 235, 240, 245, 250, 255, 265, 275, 285, 290, 298, 350, 390, 398, 399, 675, 690, 698, 698T, 699, 1080, 1085. (Part No: S.40845)
$179.40

Hydraulic Piston - For tractor models 135, 165, 175, 180, 20, 20C, 230, 235, 245, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 31, 40, 40B, 40E, 50C, 50D, 50E, 670, 698, 699. Seal kit is available as P/N 2528201K1 . Piston is 3.375" in DIA. (Part No: 1665738M91)
$54.40

Hydraulic Valve - For tractor models 1080, 135, 148, 165, 168, 175, 178, 185, 188, 20C, 230, 240, 245, 250, 255, 265, 275, 285, 290, 298, 30, 30B, 30E, 31, 350, 355, 365, 375, 390, 398, 399, 40, 40B, 50C, 50E, 550, 565, 575, 590, 595, 675, 690, 698, 698T, 699. This valve is 7.75 inches long. (Part No: 1870763M92)
$52.72

Hydraulic pump o-ring & gasket kit - For tractor models 595 with MK2 pump, (240, 250, 265, 275, 290, 550, 565, 575, 590, 675, 690, 698 all with MK2 pumps). (Part No: 1810680M1)
$12.77

Lift Arm - For tractor models MF 135, 165, 175, 180, 230, 235, 245, 255, 261, 265, 270, 275, 282, 283, 285, 290, 298, 670, 690, 698, 1080, 1085. Replaces OEM# 886404M2 (Part No: S.41447)
$77.14

Lift Arm - For tractor models 135, 150, 165, 175, 20, 203, 205, 235, 245, 255, 265, 275, 285, 30, 30B, 30D, 3165, 40, 40B. (Part No: 885446M1)
$115.98

Lift Arm, LH/RH - Used with 897567M3 cross shaft (51 spline). It uses a 7/8" Pin. For tractor models 1080, 1085, 165, 175, 180, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 360, 362, 375, 383, 390, 390T, 392S, 393, 398, 399, 40B, 40E, 50C, 50D, 50E, 670, 690, 698, 699. Replaces 1680040M91, 1680033M1, 1680040M91, 885445M91, 885447M1, 885448M1, 897579M1. (Part No: 1680040M91)
$58.58

Lift Cover Gasket - For tractor models 135, 135 UK, 150, 165, 165 UK, 175, 175 UK, 178, 180, 20, 202, 203, 204, 205, 20C, 20E, 20F, 2135, 2200, (230, 245, 265, 275 SN# 9A349239), 235, 2500, 255, 256, 282, 30, 302, 304, 30B, 30H, 31, 3165, 35, 40, 40B, 4500, 50, 50A, 50C, 50F, 60, 65, 6500, 6500H, F40, FE35, TO35. (Part No: 886549M2)
$1.16

Lift Cylinder - For MF 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 275, 290, Ind. 20, 20C, 30, 30B, 40, 40B, 50C. Lift cylinder for 3 3/8" piston. (Part No: 1671082M1)
$160.43

Lift Cylinder Piston Seal Kit - Used with 1665738M91 piston. For tractor models 20, 20C, 30, 30B, 30D, 31, 40, 40B, 40E, 50C, 50E, 135, 165, 175, 180, 230, 235, 245, 255, 265, 270. (Part No: 2528201K1)
$8.73

Lift Cylinder Piston with Rings - For tractor models 135, 150, 165, 230, 235, 240, 245, 250, 255, 265, 282, Ind: 20, 20C, 20D, 30, 30E, 40, 202, 203, 204, 205, 302, 304, 2135, 3165. Hydraulic Lift Cylinder Piston with Rings. 3 1/8" Diameter. Replaces 897561M91. (Part No: 1665737M91)
$43.37

Lift Pump - For tractor models 135, 150, 165, 175, 20C, 235, 245, 255, 265, 275, 30, 31, 40B, 50C, 50D, (30E, 50E, 178 ALL UK). 12 Spline Shaft. (Part No: 886821M94)
$200.10

Lift Pump Draft Control Spring Retainer Nut - For 1080, 1085, 135, 150, 165, 175, 180, 202, 203, 204, 205, 20C, 2135, 2200, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 30B, 31, 165, 35, 360, 375, 383, 390T, 392, 393, 40, 40E, 50, 50D, 50E, 65, 670, 690, 698, F40, FE35, MH50, TO35. (Part No: 180979M2)
$8.22

Lift Pump Follower - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 31, 3165, 35, 360, 375, 383, 390, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35. (Part No: 180933M1)
$11.25

Lift Pump Needle Bearing - Bearing for recess in rear of camshaft for hydraulic lift pump. For tractors: TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, MF290, MF298, MF360, MF375, MF383, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699, MF1080, MF1085 industrials: 20, 20C, 20D, 30, 30B, 30D, 30E, 31, 35, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 3165. (Part No: 1000251M1)
$5.69

Lift Pump Overhaul Kit - Repairs OEM pumps 1868435M3 or 888185M1. For tractor models 1080, 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 2040, 230, 240, 250, 265, 275, 285, 290, 298, 30, 350, 355, 365, 375, 390, 398, 399, 550, 565, 575, 590, 595, 675, 690, 698, 698T, 699. Hydraulic Pump Overhaul Kit contains 2 A-1868435M2, 2 A-1860038M1, A-180924M2, A180925M2, 4 A-897493M1, A-1810584M2, A-1810680M92. Valve Chambers have 4 holes, 3/8" mounting bolt holes with .524 oil hole (Part No: 556603)
$179.40

Lift Pump Repair Kit - For 1080, 135, 148, 165, 168, 175, 178, 185, 188, 20E, 230, 240, 250, 253, 265, 275, 285, 290, 298, 35, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 392S, 398, 399, 40E, 550, 565, 575, 590, 595, 65, 690, 698, 698T, 699, 765, 965. Hydraulic Lift Pump Repair Kit contains (4) rings, (4) springs, (2) valves, (2) lock rings. (Part No: 1810678M91)
$13.63

Lift Pump Strainer Assembly - Verify measurements of 2 7/16 O.D., 1 5/8-7/16 I.D., 3 3/4 HT. For tractor models 1080, 1085, 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 20, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 35, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 393, 398, 399, 40, 50C, 550, 565, 575, 590, 595, 65, 670, 675, 690, 698, 698T, 699, 765. Hydraulic Pump Strainer also replaces 1870199M92. (Part No: 1687042M91)
$7.35

Lift Pump Valve Assembly - This Lift Pump Valve Assembly measures 7.5 inches in length and is for tractor models 1080, 135, 148, 150, 165, 168, 175, 178, 185, 188, 20C, 20D, 20E, 20F, 240P, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 392S, 393, 398, 399, 40, 40B, 40E, 50C, 50D, 50E, 550, 565, 575, 590, 670, 675, 690, 698, 698T, 699. Valve is 7.5 inches long. (Part No: 1681789M91)
$32.10

Lift Pump seal kit - For tractor models TO35, 135, 148, 165, 168, 175, 175S, 185, 188, 240, 250, 265, 290, 550, 565, 575, 590, 65, 675, 690, 698, 765, 595 WITH MK2. Replaces 894906M91. (Part No: 1810467M91)
$5.69

Lift Ram 2.250 Inch - 2.250" on both ends. For tractor models 1080, 1085, 135, 165, 175, 180, 20, 20C, 230, 235, 245, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 31, 40, 40B, 50C, 50D, 50E, 670, 690, 698, 699. (Part No: 886404M2)
$77.54

Lift Ram 2.50 Inch - Used with 897567M3 cross shaft, 2.50" on both ends, 54 splines. For tractor models FE135, 135, 150, 165, 20, 20C, 20D, 20E, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 265, 30, 30E, 302, 304, 3165, 40, 40E. (Part No: 886405M1)
$60.03

Lift Shaft - 51 spline 2 3/16" diameter. (1 hole in end.) Replaces 897567M3, 897567V3 (Part No: 897567M3)
$87.77

Link Head - For tractor models 135, 165, 175, 180, 20, 20C, 20D, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 298, 30, 30B, 30D, 30E, 31, 362, 383, 390T, 391, 392, 40, 40B, 40E, 50C, 50D, 50E, 670, 690, 698, 699. (Part No: 1863389M1)
$52.52

Overload Stop - For tractor models 1080, 1085, 135, 135UK, 150, 165, 165UK, 175, 175UK, 178UK, 180, 20, 202, 203, 204, 205, 20, 2200, 230, 235, 240, 245, 250, 253, 262, 263, 265, 270, 275, 275UK, 282, 283UK, 185, 290, 290UK, 292, 298, 30, 302, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 40, 40E, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50, 65, 670, 690, 698, TO35. Overload Stop is round plate with single hole. (Part No: 180981M1)
$4.65

Piston Ring, Hydraulic - 3 1/8 - For tractor models 135, 135 UK, 150, 165, 165 UK, 230, 231, 235, 245, (265 SN# up to 9A349239), 282, 20, 20C, 30, 40, 2135, 3165. **Must be ordered in multiples of 3** Priced each. (Part No: 897564M1)
$2.25

Piston Rod, Hydraulic - 8.250" long. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 245, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 302, 304, 31, 3165, 40, 40E, 50C, 50D, 50E, 690, 698, 699, FE135, 2135. (Part No: 886410M1)
$38.50

Relief Valve - For tractor models 135, 150, 165, 175, 180, 235, 245, 255, 265, 2705, 2745, 35. (2750 psi) (Part No: 884747M93)
$26.25

Spring - For tractor models 1080, 135, 150, 165, 175, 180, 202, 205, 20C, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 30, 302, 304, 30B, 30E, 3165, 35, 360, 362, 375, 392, 40, 40B, 40E, 50C, 50D, 50E, 65, 670, F40, MH50, TO35. Hydraulic Spring. (Part No: 182582M1)
$34.35

Standpipe, Hydraulic Oil Pressure - 9.75" long. For tractor models 135, 150, 175, 20, 20C, 20D, 20F, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 360, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50C, 50D, 50E, 670, 690, 698. (Part No: 1869119M1)
$14.18

Lights
Bracket Set For lights - Fits rounded fenders. For tractor models TE20, TEA20, TO20, TO30, TO35, FE35, F40, MH50, MF50, 65, 85, 90, 135, 150, 165, 175, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 290, 298, IND 20, 20C, 20D, 30, 30B, 30D, 40B, 50C. Replaces 1750674M1, 52335M1, 523334M1. (Part No: 9N13471)
$35.85

Headlight - Used with Fender Part # 530967M92 and 530966M92. For tractor models 235, 245, 255, 265, 275, 285, 30, 31. Also replaces OEM 7027185 and D4NN13002C. (Part No: 164089AS)
$23.68

Headlight Assembly, RH - Replaces 3038174M91, 3038175M91. For tractor models 1080, 135 145381> with plastic cowl, 148, 155, 158, 165 584071> with plastic cowl, 168, 175 741981>, 178 741981>, 185, 188, 20D, 20E, 230, 240, 250, 254-4 22210641 >, 265, 2675, 2705, 2745, 275, 2775, 2805, 282, 290, 294-4, 298, 50F, 50H, 575, 590, 595 J222029>, 60H, 675, 690, 698, 698T, 699. (Part No: 1672768M91)
$28.35

Headlight Washer - Used with light part # 164089AS. For tractor models 235, 245, 255, 265, 275, 285, 30, 31. (Part No: 504781M1)
$3.30

Headlight, LH - Replaces 1860176M1, 1890155M1, 1874192M92, 3038174M91, 3038175M91. For tractor models 1080, 135 145381> with PLASTIC COWL, 135 UK MODEL SN# 145381>, 148, 155, 158, 584071> with PLASTIC COWL, 165 UK, 168, 175 741981>, 175 UK, 178 741981>, 178 771981>, 178 UK, 185, 188, 20D, 20E, 230, 240, 250, 254-4, 265, 2675, 270, 2705, 274-4, 2745, 275, 2775, 2805, 282, 285, 290, 294-4, 298, 50F, 50H, 550, 565, 575, 590, 595 J222029>, 60H, 670, 675 J222029>, 690, 698, 698T J222029>, 699. (Part No: 1672769M91)
$28.35

Rear Light - Rear Light (RH)For tractor models 20F, 230, 250, 253, 263, 30E, 340, 40E, 50E, 265 SN# 185158 & up, 240 SN# 513171 & up, 275 UK MODEL SN# 214013 & up, 290 UK MODEL SN# 347016 & up. (Part No: 1678869M92)
$23.14

Sealed Beam Bulb - Sealed beam bulb. For tractors: MF235, 255, 265, 275 & 285. 12-volt (L4440X1), 3 spade terminals. (Part No: 535505M1)
$26.03

Sealed Beam Bulb - This 12-Volt sealed beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Early fender mount for tractors: TO35, MH50, MF50, MF65 Inner or upper fender for tractors: MF150, 165, 175, 180, 1100, 1130. Fits various other models. (L4411). Replaces 1002803M91, 1509347M1, 1751347M91, 1752866M91, 181856M91, 189544M91 (Part No: 373662R91)
$8.39

Switch With Knob - Light switch with knob 509309M1. For tractors: MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF250, to SN# 2773N01000, MF255, MF265, MF270, MF275, MF285, MF288 except Brazil, MF290, MF298, MF1080, MF1085, MF1100, MF1105, MF1130, MF1135, MF1150 (Part No: 772954M1)
$26.78

Tail Light-LH - Rear Light (LH). For tractor models 20F, 230, 250, 253, 263, 298, 30E, 340, 40E, 50E, 265 (SN# 185158>), 240 (SN# 513171>), 275UK (SN# 214013>), 290UK (SN# 347016>) (Part No: 1678868M92)
$23.14

Miscellaneous
Air Element Outer - Air cleaner element, outer, for dual element filter. For tractor models MF235 Orchard, MF245 Orchard, MF255, MF265. (Part No: 1094056M91)
$36.87

Oil System
Oil Filler Plug - Rubber measures 1 7/16 inch diameter.For tractor models with Perkins Engines: 1080, 1085, 135, 150, 165, 175, 180, 20, 203, 205, 20C, 2135, 2200, 230, 235, 245, 2500, 255, 265, 275, 285, 298, 30, 30B, 30D, 31, 3165, 40, 4500, 50, 50A, 50C, 50D, 6500, 698, 70. Replaces 2487863. (Part No: 897105M1)
$13.38

Oil Filter - Oil filter spin-on element. For tractors: MF165 gas, MF175, MF180, MF255, MF265, MF275, MF285, MF1080, MF1085, others using A4-212, =AG4-212, A4-236, A4-248, A4-318. Replaces Perkins 2654403. 5-3/8 long. For 540, MF1080, MF1085, MF285 (Part No: 1447048M1)
$7.49

Oil Pressure Switch - Oil pressure switch located directly behind the oil pressure gauge, uses blade type wire terminal. For Perkins diesel engines in tractors: MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF255, MF265, MF275, MF285 SN# 9A349239 & up, MF1080, MF1085, MF1100, MF1105, MF1130, MF1135, MF1150, MF11 For 203, 205, 20C, 20, 2135, 302, 304, 30B, 30D, 30, 3165, 31, 40B, 40, 50A, 50C, 50D, 50, MF1080, MF1085, MF1100, MF1105, MF1130, MF1135, MF1150, MF1155, MF135, MF1505, MF150, MF165, MF175, MF1805, MF180, MF230, MF235, MF245, MF255, MF265, MF275, MF285 (Part No: 509682M91)
$11.99

Spin-On Oil Filter Head - This Filter Head is used with spin on filter A-1447048M1. When using filter head & filter, it will replace the old style cartridge type filter. For tractor models (165, 175, 180, 255, 265, 275, 285, 6500 all with A4.318, AD4.236 and AD4.248 Perkins diesel engine). (Part No: 741614M1)
$14.64

PTO / Driveline
Bearing - Bearing, outer, for PTO output shaft (I.D. 1.771" X O.D. 2.952" x .629" thick) For tractors: TO30, TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175 late production, MF235 For tractors with dry brakes: MF255, MF265 to SN# 9A349239, MF275 to SN# 9A349239. For tractors using snap rings on bearing. (Part No: 195498M1)
$18.00

Bearing, PTO Main Drive Shaft - For 135, 150, 165, 175, 180, 235, 245, 255, 265, 270, 275, 285, 290, 35, 50, 65. PTO Main Drive Shaft Bearing (Part No: 833646M1)
$23.08

Clutch Housing, Independent PTO - For tractor models 135, 150, 165, 175, 180, 235, 245, 255, 265, 275, 285, 1080, 1085, 20C, 30, 31, 40B, 50C, 50D. (Part No: 515875M92)
$289.90

Drive Shaft Bearing Housing, PTO - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 235, 240, 265, 275, 285, 362, 365, 375, 390, 390T, 398, 399, 4243, 4253, 4263, (283 Brazil), 290 UK. (Part No: 899331M1)
$33.59

Independent PTO Clutch Pack Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application & availability. NOTE

Output Shaft, PTO Seal - Oil seal, outer, for PTO output shaft. For tractors: MF230 axle SN# FD101, CD8028 & up, MF231, MF235 live PTO with axle SN# FD101 & up, MF240, MF245, MF250, MF253, MF255 with wet brakes, MF265 with wet brakes, MF270, MF275, MF282, MF285, MF290, MF298, MF360 to SN# P38370, MFD375, MF383, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699, MF1080, MF1085, MF3050, MF3060, MF3070, MF3090 industrials: 20 with axle SN# FD101, CD8028 & up, 20C, 20D, 30 with wet brakes, 30B, 30D, 30E, 31 with axle SN# FD101 & CD8028 & up, 40 with wet brakes, 40B, 40E, 50C, 50D, 50E. For 750, 760, 850, 860 (Part No: 834216M1)
$5.75

PTO Cap - For tractor models 230, 235, 240, 243, 245, 250, 253, 255, 260, 263, 265, 270, 275, 283, 290, 298, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 670, 690, 20, 20C, 20D, 20E, 20F, 30, 30B, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 50H, 50HX, 60H. (Part No: 532888M1)
$9.64

PTO Clutch Plate - For tractor models 255, 265, 275, 285. (Part No: 772813M1)
$10.20

PTO Cover, LH - For tractor models 135, 20, 20C, 20D, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 265, 275, 282, 283, 285, 30B, 30D, 30E, 392S, 40B, 40E, 50E. (Part No: 3760665M1)
$22.09

PTO Disc - 5.039" O.D., 3.457" I.D., 57 internal teeth. For tractor models FE35, 20C, 30, 30E, 31, 35, 40B, 40E, 50, 50C, 50D, 50E, 65, 85, 88, 90, 135, 150, 165, 175, 180, 235, 265, 270, 275, 285, 290, 298, 360, 362, 375, 383, 390, 393, 398, 670, 690, 698, 699, 1080, 1085, 1155, 4800, 4840. Replaces 190177M1, 533326M2, 1870879M1. (Part No: 1672626M1)
$9.60

PTO Fork - For tractor models 135, 20, 20C, 230, 235, 240, 245, 250, 253, 255, 265, 275, 282, 283, 285, 290, 30B, 30E, 350, 360, 362, 375, 383, 390, 40B, 50E. (Part No: 1870594M92)
$25.01

PTO Gear - 32 outer teeth, 23 splines. For tractor models 165, 175, 20E, 20F, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 30B, 30D, 30E, 360, 375, 383, 390, 40, 40B, 50C. (Part No: 1872274M1)
$75.62

PTO Gear - This is first gear for the PTO. For tractor models 135, 148, 150, 168, 185, 188, 20, 20C, 230, 235, 245, 255, 265, 270, 275, 282, 283, 285, 30, 31, 40, 40B, 50C, 50D, 50E, 565, 575, 590, 165 STD TRANS/MULTI-POWER SN130774->. For 8 speed Trans, 53 teeth, 21 splines. (Part No: 1868532M1)
$87.86

PTO Hub, Ground Speed - 23 tooth, 10 spline, 2.975" dia. For tractor models 135 late production, 165, 175, 230, 235, 240, 245, 250, 255, 265, 275, 283 Brazil. (Part No: 1872271M1)
$90.49

PTO Retainer Housing - Retainer Housing, PTO Pinion Shaft, Multi-Power Trans. I.D. inside of tube is 2.21". Unit is less Bearing & seal. For MF135, MF150, MF165, MF175, MF180, MF235, MF245, MF255, MF265, MF275, MF35, MF50, MF65, FE35. Note: If replacing old style housing that uses a bushing: Seal # 1860867M3, Bearing # 886668M1 and throw out bearing Carrier # 886727M4 must be used also. (Part No: 1860889M91)
$184.78

PTO Shaft - For tractor models 20, 20B, 20C, 20F, 282, 283, 30, 30D, 31, 390, 40, 40B, 40F, 50D, 50E, 50G, 240 LIVE, (245, 250, 270 ALL LIVE/IND PTO), (265, 275, ALL LIVE/IND PTO with WET BRAKE), 290 SINGLE SP PTO, 230 REAR AXLE SN# FD101/ CD 8028->LIVE, 235 SN# FD101->LIVE. This is a 540 RPM PTO Shaft, 24.125" long, 21 Drive Splines. (Part No: 1660288M91)
$128.34

PTO Shaft - For 270, (275, 290 both 2SP), 265 2SP IND PTO SN# 9A349239 and up, 390 2 SP SN# below P38370, (375, 390, 390T, 398 all engine SN# P38370 and up), (670, 690 all France). PTO Shaft 540 RPM. 24.125" Long, 21 & 38 Drive Splines. (Part No: 532899M1)
$163.83

PTO Shaft - For 270, 290, 565, 575, 590, 675, 690, 365 SN# below B18009, 375 SN# below B32999, 362 SN# below 32999, (390, 398 both SN# above B18009), (265, 275 both SN# above 9A349239), 299 with 1006.6 engine. PTO Shaft 1000 RPM. Replaces 532897M1. 38 Teeth, 21 Splines. Replaces 3610936M2, 532897M1 (Part No: 3610936M2)
$135.39

PTO Shaft - For 30 Late Production with dry brakes & Live PTO 165 UK S/n 130773-144682 with Live PTO, 135 UK Sn 439191 and up with Live PTO, 230 With Rear Axle SN# below FD101 or CD8028 with Live PTO, (255, 265, 275 all with Dry Brakes & Live PTO), 40 with Dry Brakes Rear Axle SN# below FD101 or CD8028 with Live PTO, (135, 150, 175, 20, 31 all with Live PTO), 165 with Multi-Power & Standard Transmission with Live PTO, 235 with Rear Axle SN# below FD101 with Live PTO. PTO Shaft 540 RPM, 24 1/32" Long, 21 Drive Spline. (Part No: 1868557M93)
$167.08

Pinion Shaft, PTO - 17 teeth, 25 spline. For tractor models 135, 150, 165, 235, 245, 255, 265, 275, 285, (290 with multi power trans). (Part No: 1868528M91)
$226.62

Rear Drive Shaft PTO - For FE135, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 265, 30, 30B, 30E, 30H, 302, 304, 31, 3165, 356, 360, 362, 370, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 6500, 690, 698. Rear Drive Shaft PTO. 8.75" Long, 10 / 18 Splines. Replaces 886548M1. (Part No: 886366M91)
$87.26

Seal - PTO Main Drive Shaft - For 135, 150, 165, 175, 180, 235, 245, 255, 265, 275, 285, 290, 35, 50, 65, FE35. PTO Main Drive Shaft Seal. (Part No: 883935M1)
$2.98

Seal, PTO Pinion Shaft Retainer - Multi-Power Trans. For MF135, MF150, MF165, MF175, MF180, MF235, MF245, MF255, MF265, MF275, MF35, MF50, MF65 (Part No: 1860867M3)
$4.80

Shaft Bushing, PTO - For 135, 135UK, 150, 165, 165UK, 175, 175UK, 180, 20, 202, 203, 2135, 2200, 230, 235, 2500, 255, 265, 275, 30, 302, 31, 3165, 35, 35FE, 35X, 40, 4500, 50, 65, 6500, TO35. PTO Shaft Bushing. (Part No: 180461M1)
$11.02

Seats
Backrest - Formed backrest, black. Tractors: MF50 SN# 533414 & up, MF65 SN# 692932 & up, and MF150, MF165, MF175, MF180, all with SN# 9A136826 & up~ MF255, MF265, MF275, MF285. Industrial: 31. Replaces 1032434M91. For 31, MF150, MF165, MF175, MF180, MF255, MF265, MF275, MF285, Industrial 31. (Part No: 1043314M92)
$63.08

Bucket Style Metal Pan Seat - Color may vary. Size is approximately 19" wide x 13" deep x 9-1/2" high. Fits Models: TE20, TEA20, TO20, TO30, TO35, MF50, MH50, MF35, 50, 65, 85, 88, 98, 135, 150, 165, 230, 235, 240, 245, 250, 265, 283, 333, 444, 555, 20, 20C, 20D, 30, 30B, 30D, 30E, 31, 40, 40B, 50, 50A, 50C, 200, 2135, 2200, 3165. Uses Cushions NO. R1001 and NO. R1000. Purchase complete assembly as PART NO. MFSEAT (Part No: 181313M93)
$71.62

Bucket Style Seat Assembly - Includes Black Primer Metal Seat Pan)and Grey Cushion Assembly with backrest and cushion, Fits Models: TE20, TEA20, TO20, TO30, TO35, MF50, MH50, MF35, 50, 65, 85, 88, 98, 135, 150, 165, 230, 235, 240, 245, 250, 265, 283, 333, 444, 555, 20, 20C, 20D, 30, 30B, 30D, 30E, 31, 40, 40B, 50, 50A, 50C, 200, 2135, 2200, 3165. (Part No: MFSEAT)
$124.19

Pan and Seat Cushion Set - Comes with black metal pan, black bottom cushion and black backrest cushion with metal plate and hardware. For tractor models: 135, 150, 165, 20, 20C, 20D, 2135, 2200, 235, 245, 265, 282, 283, 30, 30B, 30D, 30E, 3165, 35, 40, 40B, 50 LOADER, 50A, 50C, 555, 65, 85, 88, 98, TE20, TEA20, TO20, TO30, TO35. Replaces 181313M93, 181324M1. (Part No: 1210-1604)
$125.28

Seat Assembly - One piece black seat assembly with vinyl cover formed over foam cushion on a steel frame. Has holes for drainage & welded on mounting brackets. Replaces Float-A-Matic. Replaces 533813m91 thru 533813m95. Models MF135, MF230, MF235, MF245, MF255, MF265, MF275, MF285~ Industr For 20C, 30B, 30D, 40B, 50C, 50D, MF135, MF230, MF235, MF245, MF255, MF265, MF275, MF285 (Part No: 533813M96)
$172.17

Seat Bumper, Rubber - Fits tractors with a Knoedler Float-a-matic using metal bushings, 1.465" long, .635" thick. For tractor models (some 50), 65, 95, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 275, 285, 1080, Industrials MF20, MF20C, MF30, MF30B, MF30D, MF31, MF40B, MF50C, MF50D, 220 Skidder, 44 Windrower, 34 Swather, 36 Swather. (Part No: 1015879M1)
$17.50

Seat Cushion, Black - Seat cushion, black. Tractors: MF50 SN# 533414 & up, MF65 SN# 692932 & up, MF150, MF165, MF175, MF180, all with SN# 9A136826 & up:MF255, MF265, MF275, MF285. Industrial: 31. Replaces 1032168M91, 1043315M91. For 31, MF150, MF165, MF175, MF180, MF255, MF265, MF275, MF285, MF50, MF65 (Part No: 1050547M92)
$67.51

Sheet Metal / Body Parts
Battery Door - 8.625" long, 13.75" wide. For tractor models 20C SN# 9A349236 and up, 230 SN# 9A349239 and up, 240 UK, 245, 265 Narrow Orchard SN# 9A349236 and up, 270 UK, 30D. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 772804M91)
$30.26

Fender Support - For tractor models 150, 175, 255, 265, 275, 285, 30, (180 late production), (165 SN# 9A130003 andup), (235, 245 with ROPS). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 526462M1)
$187.68

Fender With Bracket - With NON-ORIGINAL TYPE BRACKET. Rear fender, dished type with mounting bracket, mounting bracket spot welded on. For tractors without roll-over protection structure. No tool box hole. For tractors: TE20, TO20, TO30, TO35, MF35, F40, MH50, MF50, MF65 exc. orchard, MF150, MF165, MF175, MF230, MF235 exc. vine & orchard, MF245, MF255 with 16 rims, MF265 std., MF275 std., MF285 std. industrials: 20 except turf, 20C except turf, 30 except turf, 30B, 35 utility, 40, 50, 50A, 202, 203, 204, 205, 2135 utility, 3165 utility, also these models with 4-post R.O.P.S., 30D, 40B, 50C. For MF1100, MF1105, MF1130. Additional Shipping of $20.00 per fender due to the weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 526905M91LR)
$112.37

Fender, Clamshell with O Bracket - Fender panel, dished type, less mounting brackets, made exactly like the original. For tractors without roll-over protection structure. For tractors: TE20, TO20, TO30, TO35, MF35, F40, MH50, MF50, MF65 exc. orchard, MF85 std., MF135 exc. vine & orchard, MF150, MF165, MF175, MF230, MF235. Add additional $10 shipping per fender due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 526904M1)
$82.95

Flat Top Fender Bracket - For 135, 150, 165, 175, 180, 235, 245, 255, 265, 275, 285, 30, 31. Flat Top Fender Bracket, Right or Left. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: S.61847)
$124.95

Flat Top Fender Light Housing - For 135, 150, 165, 175, 180, 235, 245, 255, 265, 275, 285, 30, 31 Fender Headlight Housing for Flat Top Fenders. 2 Headlight Holes. Fits Original 100 series or the replacements we sell with slight modification. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 506262M2)
$58.44

Flat Top Fender Riser Panel - For tractor models 245, 255, 265, 275, 285 all with SN# 9A289966 and up. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 579237M1)
$63.76

Flat Top Fender, Left - For tractor models 235, 245, 255, 265, 275, 285, 30, 31. Flat Top Fender - Left. With Hand Hole. Does not come with bracket. Additional $15 shipping charge will be added to your order due to the size of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. This fender uses Light Part # 164089AS and Light Washer Part # 504781M1. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 530967M92)
$192.51

Flat Top Fender, Right - For 235, 245, 255, 265, 275, 285, 30, 31. Flat Top Fender - Right. With Hand Hole. Does Not come with Bracket. Additional $15 shipping charge will be added to your order due to the size of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. This fender uses Light Part # 164089AS and Light Washer Part # 504781M1. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 530966M92)
$192.51

Grill Bottom Door - For tractors: MF255, MF265, MF275, MF285. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 532234M91)
$86.75

Grill Top Door - For tractors: MF255, MF265, MF275, MF285. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 532260M92)
$80.59

Hood Assembly - For tractor models 255 with gas engine, 265 with SN# less than 9A349239 and gas engine. Additional $25 shipping will be added to your order due to size of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 532151M94)
$138.67

Hood Trim - Rubber hood trim, between grill frame, hood & side panels. 115" long, cut to fit. For tractors: MF230, MF235, MF245, MF255, MF265, MF275, MF285, MF1085, MF1105, MF1135, MF1155. Replaces 532170M1, 535111M1. (Part No: 539310M1)
$26.80

Hood, Dash & Grill Rubber Bumper - 1/2" O.D. X 7/16" tall. For tractor models 20C, 20D, 20F, 30B, 30E, 30H, 40B, 40E, 50A, 50C, 50D, 50E, Super 90, TE20, TO20, TO30, 30, 31, 60, 65, 85, 88, 135, 150, 165, 175, 180, 202, 203, 204, 205, 230, 231, 235, 240, 245, 250, 255, 265, 302, 303, 404, 1080, 1100, 1130, 1150, 2135, 2200, 2640, 2675, 2705, 2745, 2775, 2805, 3165, 3505, 3525, 3545, 4500, 6500, MF 20, MF 25, MF 35, F40, MF (Ag & Ind): 40, 50, TO35. Replaces: 194768M1. (Part No: 180673M1)
$0.68

Side Panel, Front, LH - For tractor models 255, 265, 275, 285. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 532201M92)
$32.95

Side Panel, Front, RH - For tractor models 255, 265, 275, 285. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 532199M92)
$32.95

Side Panel, Rear, LH - For tractor models 255, 265, 275, 285 all with SN# 9A266365 and above. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 578369M1)
$28.89

Steering
Axle Rear Center Pivot Bushing - 1.875" x 2.125" x 2.500". For tractor models 165, 175, 245, 265, 275, 285, 30, 31, 3165. (Part No: 512980M1)
$12.30

Bushing, Front Axle - 2.070" O.D., 1.880" I.D., 2.00" long. For tractor models 168, 175, 178, 188, 24, 25, 255, 265, 270, 275, 282, 283, 285, 290, 360, 362, 383, 390, 390T, 393, 398, 399, 40E, 50E, 50H, 50HT, 565, 575, 60H, 60HT, 6500, 670, 675, 6800, 690, (165 South Africa only). (Part No: 897712M2)
$14.33

Bushing, Front Center Pivot - 1.875" x 2.062" x 1.125". For tractor models 165, 174, 245, 255, 265, 275, 285, 30, 31, 3165. (Part No: 512979M1)
$21.47

Front Axle Assembly - For tractor models 165, 255, 265, 392S. (Part No: 897625M94)
$255.62

Front Axle Assembly with Pivot Bushing - For tractor models 165, 175, 255, 265, 275, 3165, 30, 31. Add $25.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 512982M92)
$378.71

Front Axle Support - For tractor models 168, 175, 178, 185, 188, 270, 298, 392S, 670, 698, 699, (265, 285, 290, 690 all heavy duty), (275, 283 UK models). ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** (Part No: 1684301M91)
$683.10

Front Axle Support - 18-5/8" long, machined bottom surface. For tractor models (165 with M93 arms), (165 with 203 engine needs adaptor block S.61771 available for $92 specify in comments section if needed), (175 SN# 644002123 to 9A105660), (255 SN# 9A246493 to 9A324146), (265 up to SN# 9A324139), (275 up to SN# 9A324137), (285 up to SN# 9A281393), (Ind. 30 gas), 31. Replaces 532741M93. Measure old casting before ordering. Arms shown to differentiate between the 2 types. *** Weight is approximately 210 lbs, ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** (Part No: 512046M94)
$662.04

Gasket, Steering Box Mounting - For tractor models F40, FE35, TO35, 1080, 1085, 135, 150, 165, 165 UK, 175, 175 UK, 178, 180, 20, 20C, 2135, 230, 231, 235, 245, 255, 261, 265, 282, 285, 30, 30B, 31, 40B, 50A, 50C, 50D, 35, 35 UK, 40, 50, MH50. (Part No: 180511M2)
$3.26

Jam Nut - For tractor models 1100, 1105, 1130, 1135, 1150, 1155, 150, 165, 168, 175, 185, 188, 245, 255, 265, 275, 285, 290, 30, 31, (50 SN# 533423 and up), (65 SN# 692932 and up). (Part No: 192928M1)
$6.08

Orbital Steering Unit Seal Kit - For Danfoss Unit. Fits tractor models 1014, 1114 SN# 1110249 - 2422U38048, 1134 SN# 1240062 - 2424U41042, 20F, 265, 275, 285 with Hydro static Steering, 290 with Hydro static Steering, 298 with Hydro static Steering, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3095, 30D, 3115, 3120, 3125, 340, 342, 350, 352, 353, 355, 360, 362, 363, 3635, 365, 373, 375, 377, 383, 387, 390, 390T, 393, 397, 398, 399, 40E Utility & Turf with Manual Shuttle Transmission, 50E, 550, 565, 575, 590, 595, 675, 690, 698, 698T. (Part No: 1810503M92)
$32.91

Orbitrol Steering Motor, with Relief Valve - For tractor models (255 SN# up to 9A266365), (265, 275, 285 up to SN# 9A349239), 50C. (Part No: 532192M93)
$496.11

Orbitrol Steering Motor, without Relief Valve - Without Relief Valve. For tractor models (255 SN# up to 9A266365), (265, 275, 285 up to SN# 9A349239), 50C. Replaces OEM# 532192M93, 532192M92. (Part No: 532192M93-WO)
$549.74

Pivot Pin, Steering Cylinder - For tractor models 165 UK, 168, 175 UK, 178, 185, 188, 265, 275, 285, 290. Replaces 898363M1, 1671322M1. (Part No: 1471630M1)
$4.71

Power Steering Cylinder - For tractor models (255 up to SN# 9A324146), (265 up to SN# 9A324139), 270, (275 up to SN# 9A324137), 283, 283UK, (285 up to SN# 9A281393), 290, (670, 690 both 2WD), (50E, 50H, 50HX, 60H up to 4/1987 2WD), 50F. Replaces 3773711M91, 532193M91. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Part No: 1605121M92)
$262.13

Power Steering Filter - Oil filter element, power steering pumps. For tractor models MF270, MF282, MF283, MF290, MF298, MF375, MF383, MF390, MF670, MF690, MF698. Also for original Plessy pump #550-1-16688 on tractors: MF255, MF265 to SN# 9A349239, MF275 to SN# 9A349239 industrial: 50C. For F40, MF135, MF150, MF35, TO20, TO30, TO35. (Part No: 1662566M1)
$9.39

Power Steering Pump - Helical cut gear, 14 teeth, replaces Parker Hannifin. For tractors: 165 Perkins gas, 175, MF255 diesel, MF265 except with hydrostatic P/S pump, MF275; Industrials 30 gas, 31, 50C, 50D, 6500 forklift. Replaces 505341M91, 518637M92 & 897146M94. (Part No: 523092M91)
$302.08

Power Steering Pump - For tractor models 255, 275, 282, 50C, 265 SN# TO 9A349239, (265S, 285S ALL TURKEY), (165, 290 All UK). Replaces Part number 897147M94. (Part No: 897146M95)
$358.44

Power Steering Pump - For tractor models 50E, (275, 298, 30D, 565, 575, 590, 675, 690 ALL WITH HYDRO STATIC STEERING), 265 4WD. (Part No: 3774649M91)
$354.33

Power Steering Pump Seal Kit - Plessey type. For tractor models 165 UK, 255, (265, 275 up to SN# 9A349239), 282, 50C. (Part No: 1810509M91)
$14.85

Power Steering Pump Seal Kit - For tractor models 165, 168, 185, 188, 265, 270, 275, 282, 283, 290, 298, 362, 375, 383, 390, 565, 575, 590, 595, 670, 675, 690, 698, 698T, 30D, 50, 50E. Replaces part number 1635948M1. (Part No: 1635948M92)
$14.77

Power Steering Seal Kit - For Parker Hannifin Model reference number D17X-01. Without rear plate. Repairs 523089M91, 523090M91, 523091M91, 523092M91 and 523093M91 Power Steering Pumps. Replaces PHPSKIT, PHPS-KIT, 1201-1621 for tractor models MF1080, MF1085, MF165, MF175, MF175, MF255, MF265, MF275, MF285, MF30, MF302, MF304, MF31, MF3165, MF40B, MF50, MF50A, MF50C, MF50D and MF65. (Part No: PSP-KIT2)
$72.84

Spindle - This Spindle replaces the Left and Right hand sides for standard adjustable axles. Not for row crop wide, orchard or lo-profile. For tractors: MF165 except LPG, MF175, MF255 to SN# 9A324146, MF265 to SN# 9A324139, MF275 to SN# 9A324137. Verify measurements to ensure you are ordering the correct spindle. The vertical shaft measures 12.375 inches from top to bottom and is 1.5 inches in diameter. (Part No: 508571M92)
$95.22

Spindle Bushing - 1.680" O.D., 1.50" I.D., 1.50" long. For tractor models 1080, 1085, 135, 165, 168, 175, 180, 185, 188, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 30, 302, 304, 30B, 30D, 30E, 3165, 360, 362, 392S, 40, 40B, 40E, 4500, 575, 590, 670, 675, 690, 765, 85, 88, 90. (Part No: 183086M1)
$7.39

Spindle Bushing/Bearing/Seal Kit - Kit includes (2) 196167M1 thrust bearings, (4) 183086M1 bushings, and (2) seals. For tractor models 135, 165, 168, 178, 185, 188, 20C, 20D, 20F, 202, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 255, 265, 270, 275, 282, 285, 30, 30B, 30D, 30E, 30H, 3165, 356, 392S, 40, 40B, 40E, 4500, 575, 590, 670, 675, 690, 765, 290HD, MH50 (Part No: 196165M1)
$39.75

Steering Arm - For tractor models 168, 178, 185, 188, 265, 285, 290, 392S, (165, 175, 275 all UK). (Part No: 898354M1)
$39.57

Steering Arm - 42 spline. For tractor models 168, 178, 185, 188, 265, 270, 282, 283, 285, 290, 565, 575, 670, 675, 690, (165, 175, 275 all UK models). (Part No: 898355M91)
$38.64

Steering Arm, Main - Main spline at 90 degrees to split. For tractor models 255, (early 265, 275, 285). (Part No: 578406M91)
$77.36

Steering Arm, Power Steering - 42 spline. For tractor models 282, 275 UK, 290 UK, 165, 168, 175, 178, 185, 188, 265, 285. (Part No: 1671335M1)
$59.96

Steering Arm, RH - For tractor models 165, 175, 255, 265, 285, 30, 31, 3165. (Part No: 194569M1)
$34.76

Steering Bushing - Bushing (Moly type), for steering shaft, used in front axle support, 2 required. For tractor models MF165 except LPG, MF175, MF255 to SN# 9A324146, MF265 to SN# 9A324139, MF270, MF275 to SN# 9A324137, MF282, MF283 except Brazil, MF285 up to SN# 9A281393, MF290, MF670, MF690, MF699 ind. Replaces 194624M1, 533792M1, 897235M1. 2.015" O.D., 1.900" I.D., 1.675" long. (Part No: 194624M1-HD)
$31.45

Steering Column Assembly - Fits (255, 265, 275 Up to Serial Number 9A266365), Industrials: 40B, 50C, 50D. Replaces 1043576M92. (Part No: S.42785)
$96.78

Steering Cylinder Repair Kit - New series with plastic type piston rings and white backup washer. For tractor models 265, 275, 285, 290, 298, 30D, 50, 50B, (565, 575, 590, 670, 675, 690 all 2 wheel drive). VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Part No: 1606890M91)
$39.83

Steering Wheel - Steering wheel, 17-3/4" diameter, 5" dish, 7/8" 36 spline hub. For tractor models MF230 with power steering to SN# 9A349239 & late production manual, MF235 with power steering SN# 9A214239 & up except orchard diesel, MF245 to SN# 9A349239, MF255 to SN# 9A324137, MF26 (Part No: 772064M1)
$90.93

Steering Wheel - 36 splined center. For tractor models 165, 168, 175, 185, 188, 265, 285, 290, (565 up to SN# 6585483), (575 up to SN# 270719), (590 up to SN# 380795). Replaces original part numbers 1671945M1, 508460M2, 525681M2, 772868M1, 894737M1 (Part No: 1671945M1)
$37.44

Tie Rod - Tie rod end, left hand or right hand, outer. 15" to center of post, .742" O.D. Notched, adjustable. For tractors: MF165 except LP, MF175, MF255, MF265 except orchard, MF275 industrials: 30 turf, 3165 turf. (Part No: 1028262M91)
$23.84

Tie Rod Assembly - Inner Tie Rod Assembly for Models 165, 168, 175, 185, 188, 255, 265, 270, 275, 282, 283, 290, 565, 575, 590, 675, 690. (Part No: 886797M91)
$38.06

Tie Rod Assembly, LH - For tractor models 165, 168, 175, 185, 188, 255, 265, 275, 285, 290, (30, 31 industrials). (Part No: 553325)
$109.49

Tie Rod Assembly, RH - For tractor models 165, 168, 175, 178, 255, 265, 275, 285, 290, (30, 31 industrials). One end is notched, other end is welded. (Part No: 553326)
$60.89

Tie Rod End - Tie rod end, left hand, inner. 4.812" to center of post, 1" O.D., female. For adjustable front axle on tractors: MF165 except LP, MF175, MF255, MF265, MF275 industrials: 30, 31, 3165 turf. For 30, 3165, 31, MF165, MF175, MF255, MF265, MF275 (Part No: 1028098M1)
$26.47

Tie Rod End - Ball joint end assembly, for power steering cylinder. For tractor models MF235 orchard diesel, MF245 orchard with cyl. 519283M91, 519284M91, 532225M91 or 532226M91, MF265 SN# 9A324139 & up with cylinder 579149M91 & 579160M91, MF285 SN# 9A281393 & up industrial. (Part No: 1033035M92)
$31.24

Tie Rod End - Inner, Right Hand, measures 4 inches from center of knuckle to end of threads and is .812 inch diameter right hand threads. For tractor models 165, 168, 175, 185, 188, 255, 265, 270, 275, 282, 283, 290, 565, 575, 590, 675, 690. (Part No: 886802M91)
$17.25

Tie Rod Tube - Tie rod tube with clamp, Left Hand, 13-3/8" overall length. For adjustable front axles on tractors: MF165 exc LP, MF175, MF255, MF265 except Orchard, MF275 industrials: 30 turf, 3165 turf. For 30, 3165, MF165, MF175, MF255, MF265, MF275 (Part No: 1028099M91)
$29.51

Valve Adjustment Screw - This front axle valve adjustment screw is 3.9 inches long and is .750 diameter. For models 356, 150, 165, 168, 175, 178, 188, 265, 275, 282, 285, 290, 50, 65. (Part No: 182725M1)
$9.14

Wheels
Bearing Cone - Inner bearing cone. For tractor models 30, MF1085, MF255, MF265, MF275, MF285, MF85, MF90, Super 90. (Part No: 701114M1)
$11.88

Friction Disc - Friction disc, used in wet disc brake system. OEM quality, appearance & performance. For tractors: MF245, MF250, MF255, MF265, MF275, MF285, MF1085 industrials: 11 wheel loader UK, 30B, 30D, 31, 40, 40B, 50A, 50C, 50D, 60 backhoe/loader forklifts: 4500 (Part No: 1860964M2)
$51.06

Front Rim, 4.50 x 16 - Front wheel, with weight holes. 4:50 x 16, 6-bolt, 6" bolt circle with 4.62 pilot for 5:50 or 6:00 x 16 tires. 2500 lb. capacity. For tractor models 135, 150, 165, 165 UK, 175, 180, 202, 203, 204, 205, 20C, 2135, 230, 231, 235, 240, 240P, 240S, 245, 250, 253, 263, 265, 270, 275, 290, 35, 360, 375, 390, 390T, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4265, 4325, 4335, 4345, 4355, 50, 65, 85, 88, Super 90, TE20, TEA20, TO20, TO30, TO35. Replaces 885741M3, 1077283M91, 506020M91, 195638M91. Additional $15 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 535448M91)
$58.30

Front Wheel Bearing Kit - Kit Contains one each: LM48548(Cone), LM48510(Cup), LM11949(Cone), LM11910(Cup), 18265(Seal). For front wheel using 5-1/2" wide hub 519278M91. For tractors: MF135, MF150, MF165, MF175, MF180, MF230, MF235, except vine & orchard, MF245 except vine & orchard, MF255 to SN# 9A324145, MF265 to SN# 9A324138, MF275 to SN# 9A324136. Repairs one wheel. (Part No: 835965M92)
$22.41

Front Wheel Bearing Kit - Kit Contains one each: 25590(Cone), 25520(Cup), LM67048(Cone), LM67010(Cup), 22322(Seal). Wheel bearing kit, for front wheels using 5-1/4" wide hub 532781M91 on tractors: MF225 SN# 9A324146 & up, MF265 SN# 9A324139 & up, MF 275 SN# 9A324137 & up, MF285, MF1085 late production with fixed or adjustable axle, not for tricycle axle or hub using 9/16" National Fine wheel bolts. For 30, MF1085, MF255, MF265, MF275, MF285 (Part No: FW86)
$23.17

Front Wheel Hub Assembly - Front wheel hub assembly, 6 hole with bearing cups & wear sleeve. For front wheels on tractors: 135, 165, 175, 180, M230; MF235 & MF245 except Vine & Orchard; MF255 to tr. SN# 9A324145, MF265 to tr. SN# 9A324138, MF275 to tr. SN# 9A324136, MF1080; Industrials: 20, 20C turf, 30 turf. Replaces hubs 183019M91, 194495M91, and 510771M93. (Part No: 519278M91)
$70.52

Front Wheel Nut & Bolt Set - For 1020, 1080, 1085, 135, 1550, 165, 1650, 1655, 175, 180, 1800, 1855, 2150, 230, 235, 245, 255, 2640, 265, 4240, 4255, 856, 88. Front Wheel Nut & Bolt Set of TEN 10. Bolts are 9/16 Inches x 1 1/2 inches. Zinc Plated Nuts. (Part No: WB916-bolt_nuts)
$42.75

Hub Cap - Threaded. Used with 532781M92 Front Wheel Hub. For tractor models 1080, 1085, 165, 175, 180, 185, 255, 265, 275, 285, 2200. 2 1/2 inch diameter on threaded end. (Part No: 191495M1)
$7.39

Hub Cap, Front - Hub cap, front wheel, threaded O.D. 3 for front hubs with threaded recess. For tractors: MF135, MF150, MF165, MF175, MF180, MF235, MF255, MF265, MF275, MF1000, MF1080, MF1085, MF1105, MF1130, MF1135 industrials: 20, 30, 2135, 3165. (Part No: 194621M1)
$10.31

Nut, Disc to Axle Flange - 9/16 inches For tractor models 135, 148, 150, 20, 202, 204, 205, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 265, 285, 30, 30D, 3165, 35, 50, 65, F40, FE135, FE35, TO35. Min qty is 10. Priced individually. (Part No: 180004M1)
$1.03

Wheel Bearing Kit - Kit Includes 1 each: LM48548(Cone), LM48510(Cup), LM11949(Cone), LM11910(Cup), 18265(Seal). For tractor models 1080, 1085, 135, 150, 165, 175, 180, 185, 202, 203, 204, 205, 20C, 230, 235, 245, 255, 265, 275, 285. Replaces 835965M91. (Part No: WBKMF2)
$17.39

Wheel Bearing Kit - Kit contains 1 each of the following 25590 bearing, 25520 bearing cup, LM67048 bearing, LM67010 bearing cup, 22322 seal (lip type). For tractor models 1080, 165, 175, 180, 185, (202 SN# up to 306677), (203 SN# 65900300), (204 SN# up to 342537), (205 up to SN# 659100150), (2135 up to SN# 646992326), 255, 265, 275, 285, 40. (Part No: WBKMF3)
$33.70

Wheel Bearing Kit - For tractor models MF165, 175, 180, 185, 255, 265, 275, 285, 1080 with Heavy Duty Spindle. (Part No: R3167)
$48.79

Wheel Bolt - This wheel bolt fits the following Massey Ferguson tractor models using the 532781M92 and 519278M91 hubs: 135, 165, 175, 180, 185, 230, 235, 245, 255, 265, 275, 285, 1080, 1085, 20, 20C, and 30. It has an overall length of 1.81 inches, a thread size of 9/16 18 UNF, and thread length of 1.12 inches. It has an overall length of 1.81 inches, a thread size of 9/16 18 UNF, and thread length of 1.12 inches. Replaces part numbers: 15597A, 518611M91, 519278M91, and MP1584. (Part No: WB916)
$1.38

Wheel Hub - This wheel hub replaces 886337M1 for tractor models 135UK, 165UK, 168, 20D, 20E, 231, 240, 250, 253, 265, 275, 360, FE135, 550, 565. (Part No: 886336M1)
$54.98

Wheel Hub - For tractor models 1080, 1085, 165, 175, 180, 185, 255, 265, 275, 285. Uses WBKMF3 wheel bearing kit. (Part No: 532781M92)
$62.03

Wheel Hub Wear Sleeve - Wear sleeve, front wheel hub, for 519278M91. For 20, 20C, 2135, 30, MF1080, MF1085, MF135, MF165, MF175, MF180, MF230, MF235, MF245, MF255, MF265, MF275 (Part No: 194620M1)
$7.35



Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Part No: MIS3127)
$239.98

Brakes
Brake Rivet Tool - Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1/4" throat, 1/8" dia. rivet punch. (Part No: RIVET_TOOL)
$33.61

Brake Rivet Tool, Large - Larger version of our Brake rivet tool. 3-3/8" deep throat x 2-1/8" high throat. Includes 1 punch for brake shoe rivets and 1 punch for clutch pulley brake. (Part No: LGRIVET)
$95.23

Brake Rivet Tool, Large - Larger version of our Brake rivet tool. 3-3/8" deep throat x 2-1/8" high throat. Includes 1 punch for brake shoe rivets and 1 punch for clutch pulley brake. (Part No: LGRIVET)
$95.23

Cooling System
Magnetic Block Heater - Universal. 115-120 AC, 180 watts, draws 2 amp maximum. Surface area 2-3/4 inches x 3-3/4 inches, delivers 300-400 degrees surface temperature. (Part No: MBH1153)
$60.71

Radiator Drain Tap - This drain tap fits various tractor models as a radiator, engine block, and hydraulic drain tap. It measures 1/4 of an inch and has an 18 NPT thread size. Please verify size and thread count before ordering. (Part No: C9NN8115A)
$1.94

Zip Leak - Industrial Radiator Stop Leak - A professional strength stop leak for tractors, trucks and construction equipment. Designed for large, heavy duty cooling systems. 5 oz. Bottle. Instructions/Usage: For average antique tractors (120-160 CID engines) use 1/4 bottle for 15 minutes, if the leak fails to stop, add an additional table spoon. (Part No: Z14012)
$10.49

Decals and Emblems
Ferguson Script Decal - 12" long, vinyl, blue and white. (Part No: R0735)
$16.28

Ferguson Script Decal - 19" long, vinyl, green and chrome. (Part No: R0736)
$30.93

Ferguson Script Decal - 26" long, vinyl, blue white. (Part No: R0737)
$29.33

Massey Harris Trademark Decal - Red with yellow letters, 1-1/2" on vinyl. (Part No: R5190)
$4.89

Massey Harris Trademark Decal - Yellow with red letters, 1-1/2" on vinyl. (Part No: R5191)
$4.89

Massey Harris Trademark Decal - Red with yellow letters, 6" on vinyl. (Part No: R5192)
$16.28

Massey Harris Trademark Decal - Yellow with red letters, 3/4" on vinyl. (Part No: R5236)
$3.26

Massey Harris Trademark Decal - Red with yellow letters, 3/4" on vinyl. (Part No: R5237)
$3.26

Drive Train
Gear Shift Boot - Fits many Massey Harris Models. May not fit your tractor verify size before ordering. 1-3/4" bottom I.D., 5/8" hole dia. (Part No: VT2017)
$14.60

Lucas Hub Oil (quart) - Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Part No: LU10088)
$9.69

Electrical System
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. NOTE

Alternator Base Bracket Kit - Universal - Universal base bracket mounting kit. For converting from a generator to an alternator . Contains: brackets, bolts, washers, nuts & Basic Instructions. (Part No: 2348258)
$34.20

Alternator Pulley - Alternator (Part No: AP3158)
$43.12

Alternator Top Adjusting Bracket, Universal - This Universal Top Adjusting Bracket For Alternator Or Generator is 7/8" wide, 1-1/2" offset, 8-1/4" from farthest end of slot to center of mounting hole, 3-3/4" slot length, 3/8" mounting hole. (Part No: ABC529)
$11.93

Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 8NE10305SE)
$68.93

Battery Hold Down - Universal hold down for batteries that measure 8 15/16 inches long and 6 13/16 inches wide. (Part No: NCA10718A)
$15.09

Battery Hold Down Bolts - Pair - These "J" bolts measure 10 1/2 inches long and are universal for many batteries. Verify length. Price is for a pair. (Part No: 393161R1)
$8.62

Battery Thermal Wrap - 60 Watt, 28 inch long wrap to keep your battery warm. (Part No: BTW28)
$35.98

Battery Thermal Wrap - 80 Watt, 36 inch long wrap to keep your battery warm. (Part No: BTW36)
$37.48

Battery Thermal Wrap - 160 Watt, 36 inch long wrap to keep your battery warm. (Part No: BTW72)
$53.81

Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Part No: 28010)
$27.71

Coil Bracket - Universal Coil Bracket (Part No: R1940)
$6.94

Coil, High Performance (Black), 12 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40611)
$45.15

Coil, High Performance (Black), 12 Volt, Oil Filled - Pertronix Flame Thrower heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40511)
$35.82

Coil, High Performance (Black), 6 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40111)
$43.25

Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. (Part No: 40011)
$34.32

Coil, High Performance (Chrome), 12 Volt, Oil Filled - 12-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40501)
$40.25

Coil, High Performance (Chrome), 6 Volt, Oil Filled - 6-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40001)
$38.57

Coil, Ultra High Performance (Black), Oil Filled - Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45011)
$39.44

Coil, Ultra High Performance (Chrome), Oil Filled - Pertronix Flame Thrower II Chrome, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system using "Ignitor II". Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45001)
$44.38

Generator Cutout - Generator cutout for Autolite, 6-volt. For most MH models to 1951. (Part No: CB4014)
$28.16

Spark Plug - Extended tip, 14mm thread, 3/4" reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65)
$2.73

Spark Plug - Extended tip, 14mm thread, 3/8" reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85)
$2.73

Spark Plug - Standard tip, 7/8"-18 thread, 5/8" reach. Replaces Champion W10, W14, W18. NOTE: Verify spark plug type before ordering. (Part No: AL3076)
$4.63

Spark Plug Wire Set, 4 Cylinder, Univeral - Universal Spark Plug Wire Set, 4 Cylinder, straight boot, cut to length. (Part No: S2097)
$12.75

Spark Plug Wire Set, 4 Cylinder, Universal - For use with Ignitor II high performance electronic ignition conversion kits. (Part No: S.66442)
$11.98

Spark Plug Wire Set, Universal, 4 Cyl. - Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. Made in the USA. (Part No: CPN12259)
$13.59

Spark Plug Wire Set, Universal, 6 Cyl. - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260)
$15.00

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it! (Part No: STARTER)
$0.00

Starter Drive - Drive assembly for Delco starters. Fits all MF diesel models Perkins gas models. (Part No: 1036519M91)
$14.92

Starter Solenoid - Solenoid assembly, saddle mounting to starter. Services most late models, replaces Delco 1115510, on starters 1113139, 1113683, 1113676, others. 12-volt. (Part No: 1028587M91)
$15.38

Starter, Generator Tag, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO12)
$14.31

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO6)
$14.31

Stripper and Crimping Tool - Professional Fast and Easy tool for stripping and crimping electrical wires. (Part No: B1SB6718)
$21.20

Voltage Regulator - Voltage regulator, 12-volt. For MF tractors using Delco alternators, replaces 1119507. (Part No: 1031060M91)
$11.54

Engine Gaskets
Silicone Black RTV - Permatex black RTV silicone adhesive sealant. Provides a waterproof seal around metal, glass, rubber. Designed for indoor or outdoor use, 3 oz. tube. (Part No: PRM16BR)
$5.43

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, Oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75° F to +500° F, 3.35 oz. tube. (Part No: PRM77BR)
$5.99

Silicone Copper RTV - Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicones. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75° F to +700° F, 3 oz. tube. (Part No: PRM101BR)
$9.11

Engine Rebuild Kits
Lucas Assembly Lube - Lucas Assembly Lube (4 oz). Designed to be used as an initial lubricant to metal surfaces. It mixes with any oil and will not plug filters. This product clings to all surfaces and is an excellent rust inhibitor, allowing long term storage for all parts. It’s useful wherever tension or torque is applied. Key Benefits are: Use to pre lube camshaft, bearings, lifters and valve train. Prevents seizing, galling and scuffing perfect for engine lding, super slick and tacky, easy to use, excellent rust inhibitor, excellent for long term storage, contains Zinc, Moly and other extreme pressure additives for maximum protection during engine break-in. (Part No: 10152)
$7.18

Engine Parts
Push Rod - For Diesel Engines AT6.354.4, A6.354.4, C4.236, T6.354, 6.354 Perkins, (AD3.152 with engine SN# less than 2820092). (Part No: 31434307)
$4.31

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). NOTE

Engine Pistons and Sleeves
Piston Groove Cleaner - For pistons up to 5 1/2 inches. Cleans grooves of 5/64, 3/32, 1/8, 5/32 and 3/16. (Part No: B1SB9055)
$31.79

Piston Ring Compressor - Ratchet mechanism with square drive tool to adjust diameter and enlarged crimped edge to prevent compressor from entering cylinder. Depth 6 1/2 inches. Range 3 1/2 to 7 inches. (Part No: 900521)
$38.17

Ridge Reamer - Heavy Duty Ridge Reamer. Removes ridges from the top of the cylinder to achieve smooth wall surface on engine bores from 3 to 5 inches. Tungsten carbide blade is reversible for long life. (Part No: 500560)
$68.34

Engine Rings
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32"). NOTE

Exhaust System
Chrome Exhaust Stacks - Universal. Available from 2 to 5 inch inside Diameter. 48 to 53 inch length. Curved top on all sizes. Extended curver available on some sizes. Priced from $69.95. Single wall construction. Chrome Exhaust Clamps are $5.00 each when ordered with a pipe. Call for pricing for the size you need 800-853-2651 NOTE

Muffler Clamp, 1-1/2" - New Clamp for 1-1/2" Outside Diameter Muffler Inlet (Part No: MC112)
$2.75

Muffler Clamp, 1-1/4" - New Clamp for 1-1/4" Outside Diameter Muffler Inlet (Part No: MC114)
$2.50

Muffler Clamp, 1-1/8" - New Clamp for 1-1/8" Outside Diameter Muffler Inlet (Part No: MC118)
$2.50

Muffler Clamp, 1-3/4" - New Clamp for 1-3/4" Outside Diameter Muffler Inlet (Part No: MC134)
$2.75

Muffler Clamp, 1-3/8" - New Clamp for 1-3/8" Outside Diameter Muffler Inlet (Part No: MC138)
$2.50

Muffler Clamp, 1-5/8" - New Clamp for 1-5/8" Outside Diameter Muffler Inlet (Part No: MC158)
$2.75

Muffler Clamp, 1-7/8" - New Clamp for 1-7/8" Outside Diameter Muffler Inlet (Part No: MC178)
$2.75

Muffler Clamp, 2" - New Clamp for 2" Outside Diameter Muffler Inlet (Part No: MC200)
$2.75

Muffler Clamp, 2-1/2 - New Clamp for 2-1/2" Outside Diameter Muffler Inlet (Part No: MC212)
$3.15

Muffler Clamp, 2-1/4" - New Clamp for 2-1/4" Outside Diameter Muffler Inlet (Part No: MC214)
$3.15

Muffler Clamp, 2-3/4" - New Clamp for 2-3/4" Outside Diameter Muffler Inlet (Part No: MC234)
$4.50

Muffler Clamp, 2-3/8" - New Clamp for 2-3/8" Outside Diameter Muffler Inlet (Part No: MC238)
$4.50

Muffler Clamp, 3" - New Clamp for 3" Outside Diameter Muffler Inlet (Part No: MC300)
$4.50

Muffler Clamp, 3-1/2" - New Clamp for 3-1/2" Outside Diameter Muffler Inlet (Part No: MC312)
$4.75

Muffler Clamp, 3-1/4 - New Clamp for 3-1/4" Outside Diameter Muffler Inlet (Part No: MC314)
$6.50

Muffler Clamp, 4" - New Clamp for 4" Outside Diameter Muffler Inlet (Part No: MC400)
$7.50

Muffler Clamp, 4-1/2" - New Clamp for 4-1/2" Outside Diameter Muffler Inlet (Part No: MC412)
$7.98

Muffler Clamp, 5" - New Clamp for 5" Outside Diameter Muffler Inlet (Part No: MC500)
$7.98

Rain Cap - This rain cap is for a 1.750 inch pipe. (Part No: R1799)
$5.32

Rain Cap - This rain cap is for a 2.0 inch pipe. (Part No: R1800)
$6.30