FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 185 Tractor Parts

[Categories] [All Massey Ferguson Models] [Print]

Brakes

Intermediate Brake Disc - This Intermediate Brake Disc has a 8.976 inch outside diameter and a 4.960 inch inside diameter. Replaces OEM numbers K963647, K945755, 37H8180, 1860965M1, 1860965M2, 3613538M2, 15454600, 154.5460.0, 395.34.0112m 411040, 30359700 (Item #: 126977, Ref: 1860965M2) $16.00

Clutch

Carrier - Carrier for clutch release bearing. Carrier bore 2.228 inch (2-1/4 inch approximately), outside diameter 2-1/2 inch. PLEASE CHECK CARRIER BORE BEFORE ORDERING. This part is used on many Massey Ferguson Agriculture and Industrial Models. Replaces 519232M1, 886727M1, 886727M2, 886727M3, 886727T4 (Item #: 112309, Ref: 886727M4) $14.50

Clutch Finger Kit - This Clutch Lever Kit contains (10) 376123X1 nuts, (3) 891827M1 pins, (3) 889910M1 springs, (3) 887898M1 levers, (3) 891826M1 pins, (3) 1853164M1 bolts. For tractor models 135, 148, 155, 158, 165, 168, 178, 185, 188, 230, 240, 250, 265, 275, 285, 290, 298, 340, 350, 355, 360, 365, 375, 390, 390T, 398, 399, 550, 565, 570, 590, 595, 675, 690, 698, 698T, 699. Used on 10 and 12 inch Double Clutch. (Item #: 173290, Ref: VPG6001) $34.70

Clutch Fork Shaft, LH - This Clutch Fork Shaft is the left (long) side. It measures 1 inch in diameter by 5-17/32 inches long. It is used with: 184592M1 bushing, 886719M1 fork and 180449M1 RH shaft (each sold separately). Replaces 180444M1, 180444M2, 1679460M1 (Item #: 166103, Ref: 180444M1) $14.60

Clutch Kit, 12 inch - Our new 12 inch double clutch kit contains: 12 inch, 25 spline, double pressure plate assembly with heavy duty springs (1868005M92); 12 inch, 10 spline, rigid drive disc (3599462M92); new pilot (C5NN7600A) and release (83914247) bearings, and clutch alignment tool. For tractor models 165, 175, 175 UK, 178 UK, 185, 20D, 20E, 231, 240P, 240S, 253, 261, 263, 265S, 270, 271, 271X, 271XE, 275, 281, 281X, 281XE, 282, 283, 285, 285S, 383, 390, 471, 481, 670, 690. (Item #: 112310, Ref: 1212-1490) $410.00

Clutch-Pressure Plate, Dual - Dual pressure plate, heavy springs, 12 inch with 25 spline 1 5/8 inch hub PTO disc. Replaces 1860005M1, 1868003M91, 1868005M91, 1868005M92, 3601268M91, 3610268M91, 3610268M92, 3610268V92, 1867438M91 (Item #: 163357, Ref: 3610268M91) $397.00

Clutch Release Bearing Carrier Spring - This Clutch Release Bearing Carrier Spring is used on many Massey Ferguson models. It is 2-1/8 Inch Overall Length. It replaces 1867690M1, 193334M1, 509230M2, 180451M1, 509230M2, 180451M2, 1867690M2. (Item #: 128535, Ref: 1867690M2) $4.30

Clutch Release Carrier Fork Locking Screw - This Clutch Release Carrier Fork Locking Screw is used to secure the release fork to the shaft on many Massey Ferguson models. Two used per tractor. Sold individually. It replaces Massey numbers: 881114M1, 881144M1, 881144M2, 3771408M1, 3790757M1, 180002M1 (Item #: 182943, Ref: 881144M1) $5.10

Clutch Release Fork - For tractor models 1200, 135, 135UK, 148, 155, 158, 165, 168, 175, 178, 185, 188, 20C, 20D, 20E, 20F, 230, 231, 235, 240, 245, 250 Brazilian, 253, 255, 261, 265, 270, 275, 282, 283 Brazilian, 290, 292 Brazilian, 297 Brazilian, 298, 299 Brazilian, 30B, 30D, 30E, 30H, 35, 35X, 375E Brazilian, 390E Brazilian, 40B, 40E, 415 Brazilian, 425 Brazilian, 435 Brazilian, 440 Brazilian, 445 Brazilian, 460 Brazilian, 465 Brazilian, 475 Brazilian, 481 Brazilian, 492 Brazilian, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 60H, 65. Replaces 886719M1, 184628M1 (Item #: 179512, Ref: 886719M1) $58.00

Clutch Release Shaft - For tractor models 1200, 135, 135UK, 148, 165, 168, 175, 178, 178UK, 185, 188, 20C, 20D, 20E, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 290, 298, 30B, 30D, 30E, 30H, 35, 35X, 375E, 390E, 40, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 60H, 65, TO35, MH50. This Shaft is 1 inch diameter X 3 19/32 inches long. (Item #: 165437, Ref: 180449M1) $8.30

Clutch Spring - For tractor models 135, 148, 165, 168, 175, 178, 185, 188, 240, 250, 265, 275, 290, 35, 375, 390, 398, 550, 565, 575, 590, 595, 65, 675, 690, 698. All with multi power transmissions. (Item #: 169497, Ref: 186519M1) $3.90

Pilot Bearing - For tractor models 1004, 1004T, 105, 1080, 1085, 130, 133, 135, 140, 145, 148, 150, 152, 155, 157, 158, 165, 168, 175, 177, 178, 180, 185, 188, 20, 202, 203, 204, 205, 20B, 20C, 20D, 20E, 20F, 20H, 2135, 2165, 220, 2200, 230, 235, 240, 245, 25, 250, 253, 255, 260, 2620, 2625, 2640, 2645, 265, 2680, 2685, 270, 2720, 2725, 275, 282. Replaces OEM 828123M2. (Item #: 107933, Ref: C5NN7600A) $3.40

No
Picture
Pressure Plate - For Massey Ferguson tractor models 133, 135, 140, 148, 155, 165, 168, 175, 178, 185, 188, 340, 342, 350, Compatible with Massey Ferguson Construction and industrial models 500, Replaces Massey Ferguson OEM number 3620408M91, Spline Count: 10, Splines Diameter: 1.750", (Item #: 169849) $568.00

Release Bearing - Sealed Release Bearing for single and dual clutch, 2.50 inch inside diameter, 3.936 inch outside diameter. For tractor models 1080, 1085, 1100, 1130, 130, 133, 135, 140, 145, 148, 150, 152, 155, 157, 158, 165, 168, 175, 177, 178, 180, 185, 188, 20, 202, 203, 204, 205, 20B, 20C, 20D, 20E, 20F, 20H, 2135, 2165, 2200, 220, 230, 235, 240, 245, 250, 255, 260, 265, 270, 275, 282, 285, 290, 298, 30, 302, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35. Replaces original part numbers 892862M2, 892862M1, 86534551 and 195508M1. (Item #: 112189, Ref: N1585) $23.20

Release Bearing Carrier - Carrier, for clutch release bearing. Carrier bore 2.130 inch (2-1/8 inch approximate); outside diameter 2.503 inch (2-1/2 inch). PLEASE CHECK CARRIER BORE BEFORE ORDERING. For single or dual clutch. Tractors: TO35, MF35, MF50, MF65. Industrials: 20, 202, 203, 302, 2135. Use with bearing 892862M2 for DUAL CLUTCH ONLY. This is the old style for retainers with bronze bushing. (Item #: 165363, Ref: 183129M2) $21.70

Cooling System

Radiator - For tractor models 165UK, 185, 188. Has 3 rows of tubes, 8 fins per inch. (Item #: 119583, Ref: 885579M93) $256.00

Radiator Hose, Bottom - 1.500 inch inside diameter. For tractor models (180 with Perkins Gas engine up to serial number 67215), (185 with A4-248 engine). (Item #: 178263, Ref: 515234M1) $33.50

Radiator Hose, Bottom - 1.50 inch inside diameter. For tractor models (168 with A4-236 engine), (175 diesel), (180 Perkins Gas up to serial number 67215), (185 with A4-248 engine), (255, 265, 275, 565, 575 diesel A4-236 engine). (Item #: 118516, Ref: 898748M1) $12.30

Thermostat,180 Degree - For: F40, FE35, TEA20, 150, Deluxe, TO35, 1080, 1085, 1100, 1105, 1130, 1135, 130, 135, 148, 150, 154, 1545, 165, 168, 175, 187, 185, 188, 20, 202, 203, 204, 205, 20C, 20D, 20E, 2135, 2200, 2244, 230, 235, 240, 245, 250, 2500, 253, 254, 255, 265, 275, 285, 290, 298, 30, 30B, 30E, 30H, 320, 35, 350, 35X, 360, 362, 40, 40E, 4500, 470, 4830FC. Replaces 1446165V91, 1446127M1, 1446165M1, 1446127V91, 2485648, 1894961M1, 2485659, 325505M2, 32550, 1446165M91, 1446127M91, 2485666, 40085, 826306M1, 828139M1, 886000M1 (Item #: 110084, Ref: 1446165M91) $8.00

Thermostat Housing Gasket - Used on Perkins 212, 236 and 248 engines. Massey Ferguson models 165, 168, 174, 175, 178, 184, 185, 186, 187, 188, 194, 240, 255, 261, 265, 270, 273, 274, 274SK, 275, 283, 284, 285, 290, 293, 294, 30, 307, 30D, 31, 365, 373, 374, 375, 375E, 377, 383, 384, 387, 390E, 393, 394, 397, 425, 435, 440, 445, 487, 50, 506, 50B, 50C, 50D, 50E, 50EX, 50H, 50HX, 565, 575, 590, 60H, 99 (Item #: 112237, Ref: 36862151) $4.40

Water Pump - This New Water Pump comes gasket. It is used on some tractors and industrials with Perkins Engines: A4.212 (LA), A4.236 (LD), A4.248 (LF), T4.236 (LJ). Replaces 3641153M91, 3641361M91, 3638979M91, 3638980M91, 3640268M1, 2431154, 41312736, 4131A014, 4131A018, 41313228, 4222071V91, 41313204, 41313212, 4222071M91, U5MW0106, 41312736, 41313204, 41313228, 4131A035, 141313228, 4131A031 3771F01A1. (Item #: 180451, Ref: 4222071M91) $98.00

Water Pump Gasket - This Gasket is for 3641250M91 and other water pump backplates. Fits models 1004, 1014, 1080, 135, 148, 165, 168, 174, 175, 178, 184, 185 BACKHOE, 188, 194, 230, 240, 250 SKID STEER LOADER, 254, 255, 265, 273, 274, 275, 283, 284, 285, 290, 293, 294, 340, 342, 35, 350 INDUST/CONST, 352, 355, 360, 362, 372, 373, 374, 375, 377, 383, 384, 387, 390, 393, 394, 397, 550, 560 COMBINE, 565 COMBINE, 575 SKID STEER LOADER, 590, 595, 675, 690, 698. Replaces 3638177M1, 4224122M1, 4224387M1, 731165M1. (Item #: 163938, Ref: 4224387M1) $2.10

Water Pump Repair Kit - Repairs, 3637411M91, 743065M91 water pumps. Replaces, 739013M91, 740212M91, 741964M91. For tractor models 165, 168, 174-4S, 175, 184-4S, 185, 188, 194-4F, 240, 265, 274, 274S, 274SK, 275, 284-4S, 285, 290, 294S-4S, 362, 373, 377, 383, 387, 393, 397, 440, 50, 50B, 50D, 50E, 50EX, 50H, 50HX, 565, 575, 590, 60H, 675, 690. All the above with A4.212, A4.236 or A4.248 engines. (Item #: 173260, Ref: 3637482M91) $47.30

Water Pump - With Pulley - With 1/2 inch diameter shaft. For A4-236 diesel and A4-248 diesel in tractors: 175, 180, MF255, MF265, MF270, MF275, and other with Perkins A4.212 (LA), A4.236 (LD), A4.248 (LF), T4.236 (LJ) Engines. Replaces 743064M91, 3637411M91, U5MW0104, 3641832M91, 3640565M91, 3641219M91, 3637411M91, 4131A029, 41312566, 41312568, 41312489, 41312567, 4131A021, 4131A013, 41312756, 41312743, 41312161, 41312323, 41312366, 41312733, 41312554, 41312551, 41312561, 41312564, 41313232, 41313225. (Item #: 157623, Ref: 3641219M91) $59.00

Decals and Emblems

No
Picture
Interchangeable Hood Medallion - For Massey Ferguson tractor models 165, 175, 185, Replaces Massey Ferguson OEM number 194845M2, 194845V2, Comes with 3 interchangeable decals for 165, 175, 185 models, (Item #: 173716) $58.00

Drive Train

Axle Shaft, Rear Wheel - For tractor models 165, 168, 175, 178, 185, 188, 250, 265, 575, (275, 675 normal duty). (Item #: 884847M1) $265.97

Ball Bearing - This is a main shaft rear and countershaft bearing used in many Massey Ferguson models. It measures: 50mm inside diameter, 90mm outside diameter, and 20mm wide. Confirm measurements or OEM part number before ordering. Replaces 195493M1, 391128X1, JD10011, 6210ZZ, 6210, 851-6210ZZ (Item #: 173672, Ref: 195493M1) $24.20

Bearing, Needle - Needle Bearing for countershaft. For 1080, 1085, 1200, 1250, 133, 135, 140, 145, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 260, 261, 263, 265, 265 S (TR), 270, 275, 282, 283, 283 Brazilian, 285 (FR), 285 S (TR), 285 US Built, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 35X, 360, 362, 365, 375, 375E Brazilian, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 40H, 415 Brazilian, 4215, 4220, 4225, 4235, 4245, 425 Brazilian, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 435 Brazilian, 4355, 4360, 4365, 4370, 440 Brazilian, 445 Brazilian, 475 Brazilian, 481 Brazilian, 50, 50B, 50C, 50D, 50E, 50EX, 50H, 50HX, 5340 Brazilian, 5355 Brazilian, 5360 Brazilian, 5365 Brazilian, 550, 560, 565, 575, 590, 592, 595, 60H, 60HX, 65, 65 US Built, 670, 675, 690, 698, 698T, 699, 765, 835, 865, Super 90, TO35, Massey Harris 50. Replaces 532883M1, 195453M1 (Item #: 167261, Ref: 195453M1) $9.60

Bearing, Pinion Pilot - For tractor models 135, 148, 155, 158, 165, 168, 175, 178, 185, 188, 230, 240, 250, 265, 275, 285 with 11 x 38 differential, 290, 340, 35, 350, 355, 360, 362, 365, 375, 390, 390T, 398, 399, 550, 565, 575 with 11 x 38 differential, 590 with 11 x 38 differential, 65, 675, 690 with 11 x 38 differential, 765, FE35. Replaces 191250M1, 191250V1, 196098M1 (Item #: 117942, Ref: 191250M1) $30.90

Bearing, Transmission Mainshaft - For tractor models (165 serial number 114352 and up with multipower transmission), (168 serial number 215803 and up with multipower transmission), (185 serial number 308909 and up with multipower transmission), (188 serial number 352835 and up with multipower transmission), (135 serial number 418436 and up with multipower transmission), (175, 178, 20B, 20D, 240, 250, 265, 275, 285, 290, 550, 565, 575, 590, 675 all with multipower transmission). (Item #: 173103, Ref: 834844M1) $12.90

Center Tube - Tie rod tube, right hand, includes set screw and lock nut. 17-3/4 inches overall length. For adjustable front axle on tractors: 165, 168, 175, 185, 188, 255, 265, 270, 275, 282, 283, 290, 565, 575, 590, 675, 690. (Item #: 105117, Ref: 886801M91) $12.80

Countershaft, Transmission, 17 Spline, 15 Teeth - Shaft is 12.25 inches long. For MultiPower Transmissions on: 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 235, 240, 245, 250, 255, 265, 270, 275, 285, 290, 298, 30, 35, 50, 550, 565, 575, 590, 65, 765, FE135, FE35. (Item #: 173274, Ref: 189391M92) $181.00

Differential Cross - sed with both 2746322M1 and 181275M1 Differential Pinion Gear, this part replaces Massey Ferguson 894302M1, 6211999M1, 894302M2, 2746135M1, 2746135M2, 181276M1, 588731M1 (Item #: 113612, Ref: 894302M3) $14.00

Differential Gear - The dimensions of this gear in inches are: A - 1 15/16, B - 4 1/2, C - 2 3/4, D - 15/16. It has 14 Teeth, and 39 Splines. Verify measurements before ordering. Used on Massey Ferguson models: 1080, 1200, 1250, 133, 135, 140, 148, 152, 155, 158, 165, 168, 175, 178, 185, 188, 20C, 20D, 20F, 230, 240, 250, 2620, 2640, 265, 2680, 2720, 275, 285 (FR), 290, 298, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 30B, 30D, 30E, 30H, 3115, 3120, 3125, 3140, 340, 342, 350, 352, 355, 360, 3610, 362, 3630, 3635, 3645, 3650, 3655, 372, 375, 375E Brazilian, 382, 390, 390E Brazilian, 390T, 398, 399, 40B, 40E, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 6110, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190, 675, 690, 698, 698T, 699, 8110, 8120, 8130, 8140, 8150, 8160 Replaces 885517M1, 885518M1, 885518M4, 885518M2, 885518M5 (Item #: 166930, Ref: 885518M1) $56.00

Differential Pinion Gear - Verify that the gear you are replacing has 10 teeth and a 3.32 inch diameter. For tractor models 1080, 1200, 1250, 133, 135, 140, 148, 152, 155, 158, 165, 168, 175, 178, 185, 188, 20C, 20F, 230, 240, 250, 2620, 2640, 265, 2680, 2720, 275, 285 (FR), 290, 298, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 30B, 30D, 30E, 30H, 3115, 3120, 3125, 3140, 340, 342, 350, 352, 355, 360, 3610, 362, 3630, 3635, 3645, 3650, 3655, 372, 375, 375E Brazilian, 382, 390, 390E Brazilian, 390T, 398, 399, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 6110, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6190, 675, 690, 698, 698T, 699, 8110, 8120, 8130, 8140, 8150, 8160. Replaces 2746322M1, 897725M1 (Item #: 166937, Ref: 2746322M1) $24.70

Differential Pinion Gear Thrust Washer - Used with both 2746322M1 and 181275M1 Differential Pinion Gear, this part replaces Massey Ferguson part numbers 181277M1, 514958M1, 885520M1, 3387281V1, 3387281M1 (Item #: 166940, Ref: 3387281M1) $1.30

Differential Planetary Thrust Washer - Used on many Ferguson and Massey Ferguson models, this washer measures 3 inches inside diameter, 4 3/16 outside diameter and 0.053 inches thick. Used on 1080, 1100, 1105, 1130, 1135, 1150, 1155, 1200, 1250, 133, 135, 140, 148, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20C, 20D, 20F, 2135, 230, 240, 250, 2620, 2640, 265, 2680, 2720, 275, 285, 290, 298, 30B, 30D, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 372, 375, 382, 390, 390T, 398, 399, 50, 550, 565, 575, 590, 595, 65, 675, 690, 698, 698T, 699, 85, 88, Super 90, TE20, TEA20, TED20, TEF20, TO20 Replaces OEM number 181247M1. (Item #: 173021, Ref: 181247M1) $11.50

Differential Planetary Thrust Washer - Used on many Ferguson and Massey Ferguson models, this washer measures 3 inches inside diameter, 4 5/32 inches outside diameter and 0.0625 inches thick. Used on 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 1200, 1250, 133, 135, 140, 148, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 261, 2620, 2640, 265, 2680, 270, 2720, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E Brazilian, 382, 383, 385, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50A, 50C, 50E, 50F, 50H, 550, 565, 575, 590, 60H, 670, 675, 690, 698, 698T, 699. Replaces 897726M1, 3387282M1 (Item #: 176238, Ref: 897726M1) $8.40

Differential Plate, Left Hand - Replacing Massey Ferguson part numbers 1860885M1, 1687864M3, 1687864M1, 1860865M1, this plate is used on the left side of the differential. Used on Massey Ferguson models: 1080, 1085, 165, 168, 185, 188, 245, 255, 265, 270, 275, 282, 285 (FR), 290, 290 Brazilian, 298, 30B, 30D, 30E, 30H, 375E Brazilian, 390E Brazilian, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 565, 575, 590, 595, 60H, 60HX, 670, 675, 690, 698, 699 (Item #: 173284, Ref: 1687864M1) $123.00

Drive Shaft Retainer Assembly O-Ring - This Drive Shaft Retainer Assembly O-Ring is used on multiple models of Massey Ferguson. Replaces OEM numbers 886089, 886089M1 (Item #: 152375, Ref: 886089M1) $1.20

Gear, 2nd - This gear is 2nd speed for 8 speed transmission. Gear has 23 teeth. For tractor models FE135, FE35, F40, MH50, TO35, 1080, 1085, 11, 165, 148, 150, 155, 158, 165, 168, 175, 178, 185, 188, 20, 20C, 20D, 20F, 202, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 550, 565, 575, 590, 65, 765. (Item #: 173295, Ref: 180419M1) $25.90

Gear, 2nd and 4th - This gear is 2nd and 4th, for an 8 speed transmission. Gear is 36 and 46 teeth, 18 spline. For tractor models FE35, MH50, 1080, 1085, MF11, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 202, 203, 204, 205, 230, 235, 240, 245, 250, 2500, 255, 265, 275, 283, 285, 290, 30, 31, 3165, 35, 40, 40B, 50C, 50D, 550, 565, 575, 590 (65, 765 ALL with MULTI POWER), FE135 COVENTRY, 2135 TURF UTIL NARROW. (Item #: 179620, Ref: 1682691M1) $142.00

Gear, 3rd - This gear is 3rd speed for, 8 speed transmission. Gear has 33 teeth, 17 spline and is 5.075 inches in diameter. For tractor models FE35, MH50, TO35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 65, 765, FE135 COVENTRY, 2135 TURF UTIL NARROW. (Item #: 151824, Ref: 180415M1) $27.10

Gear, 3rd Mainshaft - 41 tooth, 18 spline. Used in 8 speed transmissions. For tractor models 135, 148, 150, 155, 158, 165, 168, 175, 180, 185, 188, 20, 240, 240P, 265, 275, 282, 30, 31, 375, 383, 390, 50H, 550, 565, 575. Replaces 1660094M1. (Item #: 165945, Ref: 1682690M1) $72.00

Gear Lever Tension Spring - This Gear Lever Tension Spring is widely used on many Massey Ferguson Tractors. Confirm part number before ordering. Replaces 192007M1, 964894M1, 180582M1 (Item #: 126830, Ref: 180582M1) $2.50

Gear, Reverse - For tractor models FE35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 365, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 65, 765, FE135 COVENTRY, TO35 serial number 17159>, 2135 TURF UTILITY NARROW. This gear is for a 8 speed transmission with 13 and 21 teeth. (Item #: 151823, Ref: 183040M1) $75.00

Gear Shift Spring Retainer - This Gear Shift Spring Retainer is used on many Massey Ferguson Models. Replaces OEM numbers 180583M1, 1861024M1 (Item #: 126687, Ref: 1861024M1) $13.30

Inner Axle Bearing - Measuring 1.024 inch inner width, 3.244 inch inside diameter, 4.941 inch outside diameter, this bearing is used on Massey Ferguson 1080, 1085, 135, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 235, 240, 245, 250, 250X, 253, 255, 265, 270, 275, 282, 283, 285, 290, 292, 295, 296, 297, 298, 299, 30, 30B, 30D, 30E, 31, 3165, 350, 352, 355, 360, 362, 365, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 398, 399, 40, 40B, 40E, 410, 420, 440, 445, 460, 465, 475, 492, 50, 50A, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 565, 575, 590, 595, 60H, 670, 675, 690, 698, 698T, 699. Verify measurements or OEM number. Many of the listed models have more than one rear axle configuration. Replace Massey Ferguson part numbers 1881931V91, 1881931M91, 894776M1, 588237M1, 27687, 27620 (Item #: 173235, Ref: 1881931M91) $59.00

Input Housing Gasket - This Gasket replaces part numbers: 188807M2, 512787M2 (Item #: 167235, Ref: 512787M2) $1.90

Input Shaft Abutment - This part sits between 195513M1 Needle Bearing and 886352M1 Spring. Replaces Massey Ferguson part number ``886353M1 (Item #: 179716, Ref: 886353M1) $13.20

Main Drive Pinion - For tractor models 148, 168, 175, 185, 188, 20C, 20D, 240, 250, 255, 265, 270, 275, 282, 285, 290, 565, 575, 165 STANDARD TRANSMISSION. Main Drive Pinion for 8 speed transmission. Pinion is a 24 tooth, 10 spline, 13.750 inches long. (Item #: 170393, Ref: 964925M3) $159.00

Main Input Shaft Inner Bearing - This bearing is widely used in 12 Speed Synchromesh, Multi Power, 8 Speed Constant Mesh, and 8 speed Synchromesh transmissions. It measures 1 inch inside diameter, 1 5/16 inchs outside diameter, and is 1 inch long. Replaces Massey Ferguson part numbers 2700273V1, 2700273M1 (Item #: 187378, Ref: 2700273M1) $10.80

Mainshaft - Multi power and 6 speed transmission, 18 spline, 12.250 inches long. For tractor models 1080, 1085, 135, 148, 150, 155, 159, 165, 168, 175, 180, 185, 188, 235, 240, 245, 250, 255, 265, 275, 285, 290, 30, 550, 565, 575, 590, (FE135 Coventry). Replaces 520701M3. (Item #: 165944, Ref: 1682542M1) $223.00

Mainshaft - 8 speed transmission, 18 spline, 13.50 inches long. For tractor models 1080, 1085, 1105, 1135, 1155, 135, 148, 150, 155, 158, 165, 168, 175, 180, 185, 188, 20, 20C, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 275, 285, 290, 30, 30B, 30D, 31, 360, 362, 40, 40B, 40E, 50C, 50D, 550, 565, 575, 590. Replaces 1870149M1. (Item #: 125332, Ref: 1687643M1) $111.00

Mainshaft, Heavy Duty, 8 Speed Trans. - 22 tooth, 18 spline, 13.375 inches long. Replaces 1870151M1, 1682448M1. For tractor models 1080, 1085, 135, 148, 155, 158, 165, 168, 175, 180, 185, 188, 240, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 375, 383, 390, 390T, 50E, 50H, 550, 565, 575, 590. Replaces 1682448M1, 1870151M1. (Item #: 125331, Ref: 1687642M1) $98.00

Outer Cover Seal - Measuring 4.00 inches outside diameter x 2.875 inches inside diameter, 0.375 inches wide, this is the outer seal on cover. Replaces 894736M4, 834220M1, 894763M5, 894763M2, 894763M3, 894763M4, 3699800M1, 3699800M2, 73119909, 70657582, 0657582, 657582, 6V8172, 2X5156, 8T6917, 1B4327, 1D4327, 304816C91, 290811R92, 71855C1, 270380C91, 643986C91, B132704AB (Item #: 172312, Ref: 834220M1) $17.30

Pinion Epicyclic Gear - Replacing Massey Ferguson part numbers 894769M1, 894769V1, 897769M1, 184176M1, this Planetary Gear has 12 Teeth. It is used on tractors models: 135, 145, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 235, 240, 245, 250, 250X, 253, 255, 261, 265, 270, 275, 282, 283, 290, 30, 30B, 30D, 30E, 30H, 31, 3165, 375E, 390E, 40, 40B, 40E, 410, 420, 425, 430, 435, 440, 481, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 565, 575, 590, 60, 60H, 65, 670, 675, 690, 765 (Item #: 170397, Ref: 897769M1) $48.80

Pinion Gear - For 135, 148, 150, 155, 158, 168, 175, 185, 188, 20, 240, 240P, 265, 275, 282, 30, 31, 375, 383, 390, 50H, 550, 565, 575. Pinion Gear for 8 speed transmission (28 tooth, 20 splines, 4.350 inch diameter). (Item #: 166038, Ref: 964916M1) $23.80

Pinion Jam Nut, New Style - Used on Massey Ferguson models: 1004, 1004T, 1200, 1250, 165, 168, 185, 188, 20, 20C, 20D, 20E, 20F, 230, 230 US Built, 240, 245, 250, 253, 255, 260, 261, 265, 27, 275, 282, 282 US Built, 283, 285 (FR), 290, 290 US Built, 298, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E Brazilian, 382, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 4215, 4220, 4225, 4235, 4245, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 60H, 60HX, 670, 675, 690, 698, 698T, 699. This new style nut replaces 532956M1, 3596252M1 (Item #: 173348, Ref: 532956M1) $10.90

Pinion Nut Washer - Used on Massey Ferguson models: 133, 135, 140, 145, 148, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 2135, 2200, 230, 235, 245, 2500, 255, 265, 275, 30, 31, 3165, 35, FE35, 40, 4500, 50, 50A, 65, 6500, 765, 865 (Item #: 183834, Ref: 180455M1) $2.50

Pinion Shaft, Transmission - 17 teeth, 25 splines. For tractor models 135, 148, 150, 155, 158, 165, 168, 185, 188, 20, 20C, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 30, 31, 40, 40B, 50C, 50D. Replaces 1868530M91. (Item #: 125326, Ref: 1868531M1) $98.00

Planetary Pinion Carrier Assembly - 32mm gears, used with 18 tooth shaft. For tractor models (304 early), (175UK, 178UK with multipower transmission serial number up to 728921), (204, 205, 2200, 50 all with hydraulic shuttle transmission), (30 with instant reverse, early), (40 with instant reverse, late), (50A with instant reverse serial number up to DC1222), (2500 with instant reverse serial number up to 9A70308), (180 with 6 speed or multi power transmission serial number CW6805), (148, 168, 185, 188 all with 8 speed or multipower transmission). Replaces 887128AM91, 882503M91. (Item #: 172307, Ref: 1886634M91) $252.00

Planetary Ring Gear Gasket - Two of these gaskets are used per planetary ring gear. Replaces Massey Ferguson part numbers 184182M3, 191141M1 (Item #: 128513, Ref: 191141M1) $7.80

Planetary Ring Gear Thrust Washer - Used on Massey Ferguson 1004, 1004T, 1080, 1200, 1250, 133, 135, 145, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 235, 240, 245, 250, 253, 255, 260, 261, 265, 270, 275, 282, 283, 285, 290, 292, 297, 298, 299, 30, 30B, 30D, 30E, 30H, 31, 3165, 350, 352, 355, 360, 362, 365, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 40, 40B, 40E, 410, 415, 420, 425, 430, 435, 440, 445, 460, 465, 475, 481, 492, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 560, 565, 575, 590, 592, 595, 60, 60H, 60HX, 650, 660, 670, 675, 680, 690, 698, 699, 8170, 8180, 8210, 8220, 8240, 8250, 8260, 8270, 8280. This part is 4.75 inches long and 0.50 wide. Replaces 1866542M1, 894867M1 (Item #: 179689, Ref: 1866542M1) $3.60

Rear Axle Housing Carrier Plate O-Ring - Measuring 317.5mm inside diameter by 2.62mm thick, this o-ring is used on Massey Ferguson 1085, 1200, 1250, 135, 152, 155, 158, 165, 168, 175, 180, 185, 188, 20C, 20D, 20E, 20F, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 292, 297, 298, 299, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 398, 399, 40, 40B, 40E, 415, 425, 435, 440, 445, 460, 465, 475, 481, 492, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 60H, 60HX, 670, 675, 690, 698, 698T, 699. Replaces OEM numbers 1860838M1, 1860838V1, 1860838M2 (Item #: 173237, Ref: 1860838M1) $4.80

Rear Drive Shaft Needle Bearing - Used on Massey Ferguson models: 1080, 1085, 133, 135, 140, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20, 202, 204, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 283 Brazilian, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 372, 375, 375E Brazilian, 382, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 65, 670, 675, 690, 698, 698T, 699. This bearing replaces OEM numbers 195513M1, B1212, S1212 (Item #: 179695, Ref: 195513M1) $22.40

Sealing Ring - This sealing ring is 1-1/2 inch outside diameter and 3/32 inches wide. Two used per input shaft. Replaces Massey Ferguson part number 186581M1. (Item #: 165436) $6.40

No
Picture
Seal, Rear Wheel Axle Shaft, Outer - 4.00 inch x 2.875 inch x .375 inch. For tractor models 165, 168, 175, 178, 185, 188, 250, 265, 275, 290, 565, 575, 590, 595, 675, 690, 698. (Item #: 172312, Ref: 894763M1) $17.30

Shift Rail, 2nd and 4th - Shift Rail, 2nd and 4th. Replaces 180438M2 For the following tractors: 135, 138, 148, 155, 158, 165, 168, 175, 178, 185, 188, 230, 240, 250, 265, 275, 285 with 11x38 differential, 290, 340, 35, 350, 355, 360, 362, 365, 375, 390, 390T, 398, 399, 550, 565, 575 with 11x38 differential, 590 with 11x38 differential, 65, 675, 690 with 11x38 differential, 765, FE35. (Item #: 172896, Ref: 1678866M1) $37.70

Transmission to Differential Shaft Spring - Used with 886353M1 abutment and 195513M1 this spring sits inside the differential input shaft. (Item #: 179661, Ref: 886352M1) $10.00

Electrical System

Electronic Ignition Conversion Kit -12V Negative Ground - For 35, F40, 50 all with Cont Z134 engine and Delco (D)1112643 dist, MF65 with Cont G176 engine and D1112644 dist, 135 Spec with Cont Z145 with D1112643 dist, 135/150 with Cont Z145 and D1112644 dist, 165 with Cont G176 engine and D1112644 dist, 165 with Perkins AG4-212 with D1112458 dist, 175/180 with Cont G206 engine with D1112647 dist, 175/180/185 with Perkins AG4-236 engine with D1112693 dist, MF255 with Perkins AG4-212 engine and D1112458 dist, MF265/MF285 with Perkins AF4-236 engine and D112693 dist. Also works with H-260 Continental Engine.Electronic ignition conversion kit. Replaces points and condenser with an electronic module. For use on 12 volt neg grnd system only. Never change points again. Easy to install. Increase spark plug life and horsepower. Improve fuel economy. (Item #: 105073, Ref: 1145A) $120.00

Electronic Ignition Conversion Kit, High Perfomance, 12 Volt Negative Ground - The Ignitor II has many of the same great features that the Ignitor has, but its smarter. It senses the coil current level and use a powerful micro controller to adjust variable dwell which helps to maintain peak energy throughout the entire RPM range. Senses startup and develops more energy for quicker, easier starting. Current protection shuts down the system, preventing component damage. NOTE: Ignitor II applications can not be used with solid core ignition wires, can be used with our ignition wires p/n CPN12259EI. Replaces points and condenser with an electronic module. Use with 12 volt negative ground systems. For tractor models 165 with Cont G176 engine and D1112644 dist, 165 with Perkins AG4-212 with D1112458 dist, 175/180 with Cont G206 engine with D1112647 dist, 175/180/185 with Perkins AG4-236 engine with D1112693 dist, MF255 with Perkins AG4-212 engine and D1112458 dist, MF265/MF285 with Perkins AF4-236 engine and D112693 dist. Also works with H-260 Continental Engine. (Item #: 183757, Ref: 91145A) $179.00

Generator, 12 Volts - Lucas style replacement, 12 volt, pulley is not included. For tractor models: 135, 148, 155, 158, 165, 168, 175, 178, 185, 188, 35, 35X, 50, 65, FE35, TE20, TEA20, TED20, TEF20. Replaces K908882, 3049871R91, 81806433, ADN10001R, ADN10001, E27N10000, 2871170, 897104M92, 12871182, 37H8231, 22703, 22791, LRD101, 2871170, 2871182, 22703, 22791, LRD101, 897104R92, 897104T, 897104M92, 2871182 (Item #: 113578, Ref: R1192673) $149.00

Neutral Safety Switch - This Neutral Safety Switch has blade type terminals. For tractors: MF240*, MF250*, MF253, MF282, MF283 except Brazil, MF298*, MF360, MF362, MF375, MF383, MF390, MF393, MF398, MF399 industrial: 40E*. *Optional with 3381094M1. Replaces 888501M2, 963417M2, 1012043M91, 1679 223M2, 1679223M1, 1679223M2, 3381094M1, 34198, 39121, 39855, 963417M2, SMB497. (Item #: 164579, Ref: 1679223M2) $22.00

Pulley, Generator - This generator pulley measure 4 1/2 inches in diameter, for a .575 inch shaft and uses a 1/2 inch belt. For tractor models 135 UK, 165 UK, 168, 175 UK, 178, 185, 188, 35FE, 35X, 40 SN# UA164181D->, 50. For Lucas Generator. Replaces 31141425, 731003M2 (Item #: 173298, Ref: 731003M2) $42.60

Starter - 12 volt, 10 tooth, clockwise rotation. For tractor models (506 from 1971 up), (520, 525 1971-79), (620, 625 1971-72), (168 1971-72 with 236 dsl), (175S, 185 1970-72), (178 1970-72 with 248 dsl), (188 1972-74 with 248 dsl), (240 1983-99 with 152 dsl), (250 1983-86 with 152 dsl), (261 1992-98), (271, 281 1998-00 with 1004.4 dsl), (270 1983-86 with 236 dsl), (283 1983-99 with 248 dsl), (290 1983-86 with 318 dsl), (298 1983-86 with 318 dsl), (365 1990-96), (375 1986-98 with 236 dsl), (383 1986-98 with 248 dsl), (390 1987-98 with 248 dsl), (396 1992-98 with 1006.6 dsl), (398 1987-97 with 236 dsl), (399 1987-98 with 354 dsl), (670 1983-86 with 236 dsl), (690 1983-86 with 248 dsl), (698, 698T 1983-86 with 318 dsl), (699 1984-86 with 354 dsl), (3050 1987-89 with 236 dsl), (3060 1987-93 with 248 dsl), (3070 1987-93 with 236 dsl), (3610, 3630 1987-90 with 354 dsl). Replaces 26410, 26274, 26366, 27539. Verify numbers on starter before ordering. (Item #: 112303, Ref: SLU0005) $165.00

Starter - This starter comes with solenoid, is for 12 volts, clockwise rotation, 10 teeth, 3 KW and LEFT HAND MOUNT. For models 1014, 1020, 1114, 155, 158, 165, 168, 175, 178, 185, 188, 240, 265, 275, 290, 298, 3050, 3060, 3065, 3070, 3075, 362, 365, 372, 375, 382, 390, 396, 398, 399, 4215, 4220, 4225, 4235, 4240, 4245, 4255, 4260, 4265, 4270, 431, 4325, 4335, 4345, 4355, 4360, 4365, 481, 492, 506 and other combine models. Replaces 3821818M93, 3821818M94, 4225326M91 and Perkins numbers 3873K405 and 2873K625. (Item #: 118485, Ref: 3821818M91) $191.37

Starter, Temperate Climate - Lucas Type for Perkins A4.212, A4.236 and A4.248 Diesel Engines. For MF 165, 175, 185, 265, 275, 290, 298, 362, 365, 375, 390, 390T, 396, 398, 399, 675, 690, 698, 699, 3050, 3060, 3065, 3070, 3075, Ind. 50, 50D, 50E, 50F, 60H. Replaces 1860093M2, 1680064M1. (Item #: 112303, Ref: S.41143) $165.00

Switch, Lamp and Horn - Lucas type. Used on 135, 148, 165, 168, 175, 178, 185, 188, 230, 235, 240, 245, 250, 255, 265, 275, 290, 298, 35, 35 Gas / 35 Petrol, 35X, 375E Brazilian, 390E Brazilian, 50, 50E, 50EX, 565, 575, 590, 65, 765. Replaces 882283M1, 54033364, 34952 (Item #: 124742, Ref: 1502378C1) $17.50

No
Picture
Voltage Regulator - This voltage regulator is a replacement for original regulator on models 135UK, 148, 155, 165UK, 168, 175UK, 178, 185, 188, 254, 65, 765. Replaces 02350137, ATJ8799, 2872635, ATJ8799, VPF3002, 02350137, 2872635, HM894835. (Item #: 177085, Ref: 894835M1) $63.00

Engine Bearings

PTO Oil Seal - For Massey Ferguson tractor models 135, 148, 155, 165, 168, 185, 188, 230, 240, 250, 265, 275, 285 (With A4.248 Engine), 290, 340, 342, 350, 355, 360, 362, 365, 375, 550, 565, 575 (UK Model), 590 (UK Model), Replaces Massey Ferguson OEM number 1860011M1, VPH1407, 360, 362, 365, 375, 550, 565, 575, 590, (Item #: 152374) $3.80

No
Picture
Rod Bearing Set, 152 Diesel, .010 - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 106997, Ref: 85036A) $11.00

No
Picture
Rod Bearing Set, 152 Diesel, .020 - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 106998, Ref: 85036B) $9.00

No
Picture
Rod Bearing Set, 152 Diesel, .030 - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 106999, Ref: 85036C) $11.20

No
Picture
Rod Bearing Set, 152 Diesel, Std - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 106996, Ref: 85036) $10.10

Engine Gaskets

Gasket Set, Top - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 107250, Ref: 748008M91) $33.30

Pump Shaft Seal - For Massey Ferguson tractor models 50, 165, 168, 175, 178, 185, 188, Replaces Massey Ferguson OEM number 1884308M1, 1886308M1, (Item #: 166177) $2.90

Rope Seal Housing Gasket - 4 Cyl - For Massey Ferguson tractor models 165, 168, 174, 175, 178, 184, 185, 188, 194, 194-4, 255, 275, 285, 290, 399, 1014, 1100, 1105, 1130, 1135, 1200, Replaces Massey Ferguson OEM number 3638780V1, 747606M1, 36817136, 735110M1, (Item #: 165194) $3.70

Seal, Front - FOR AD3.152 Perkins diesel, AT6.354 and A6.354. Replaces: VPC5102, VPC5103, 02100004, 1446853M1, 1447690M1, 2413F436, 2415361, 7701031630, 810742, 812280. (Item #: 107222, Ref: 2418F436) $10.10

Valve Cover Gasket - This gasket is used on multiple Massey Ferguson models with Perkins 212, 236 and 248 4 cylinder Perkins Diesel Engines. It replaces original part numbers 21826363, 3638461M1, 3638482M1, 36811114, 36811122, 36811126, 36811131, 36811132, 36811133, 3681A011, 3681A026, 3681A027, 4223924M1, 746714M1, 748277M1 (Item #: 128689, Ref: 737225M1) $12.10

Valve Seals - Valve seals for AD3. 152 Perkins Diesel. With engine serial number less than 2820092. Replaces 1447019M1, 33817125, 33817402, 3637041M1, 733820M1, 736840M1, 740009M1. (Item #: 128624, Ref: 33817117) $0.90

Engine Parts

Bolts, Conn Rod - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 160206, Ref: 32762144) $3.20

Camshaft Gear - 56 tooth. For tractor models 1100, 1130, 1745, 180, 184-4, 220, 255, 2640, 2675, 270, 2705, 274-4, 282, 283, 285, 294-4, 30, 300, 3050, 3060, 3070, 3505, 3525, 3545, 3630, 399, 470, 50C, 50D, 50E, 50H, 60, 6500, 670, 699, 80, 850, 860, (165, 168, 175, 178, 185, 188, 265, 275, 290, 565, 575, 590, 690 all with engine A.212, A4.236 or A4.248). Replaces 31171353. (Item #: 172330, Ref: 736254M1) $94.00

Connecting Rod - For tractor models 1014, 1100, 1114, 165, 168, 174-4S, 175, 178, 185, 194, 255, 2620, 2645, 265, 2675, 274, 275, 285, 290, 3060, 3080, 3090, 3095, 362, 365, 373, 375, 377, 387, 390, 393, 396, 397, 399, 590, 690, 699 all with A4.212, A4.236, A4.248 or A6.354 engines. Replaces M7BJ0015, VPB6002, 02100013, 02101440, 3637034M1, 3637034M91, 6005000118, 676879, 736595M91, 738713M91, 747007M91, 84920, ZZ90009 (Item #: 114552, Ref: ZZ90009) $74.00

Crank Gear - 28 teeth. Do NOT use on build number: LE70089, LE22376, LE80173. For tractor models 1007, 165, 168, 174-4S, 175, 178, 184-4S, 185, 188, 194, 194-4F, 255, 265, 274, 274S, 275, 284S-4S, 285, 290, 294S-4S, 3050, 3065, 3070, 30D, 3370, 362, 365, 373, 375, 377, 383, 387, 390, 393, 397, 398, 50, 50B, 50C, 50D, 50E, 565, 575, 590, 6000, 60H, 675, 690, 698, 698T. All with either A4.121, A4.236 or A4.248 Perkins Engines. Replaces 734749M1, 73479M1, 734749M1. (Item #: 165548, Ref: 31171681) $69.00

No
Picture
Crankshaft Kit - This Crankshaft Kit is used on Perkins A4.236 and A4.248 engines with lip rear crankshaft seal 1447049M91 (not included). It contains crankshaft, 735168M91 main bearing set, 736950M91 rod bearings, 733714M1 thrust washers, 3638115M1-thrust block (this three bolt pulley retainer replaces older single bolt style), 3638113M1 bolts. This Crankshaft does not have balancer weights in Web of Shaft. Replaces 31315981, 31315985, 3637401M91, 94433, 94435, 94436, U5BG0019, U5BG0024, U5BG0052, ZZ90081 (Item #: 3637401M91KIT) $558.83

Crankshaft Pulley Retaining Kit - This Crankshaft Pulley Retaining kit is used on 1004.4, 1004.4T, 1004.4TI, 4.41, A4.236 and A4.248 Perkins Engines with 3 bolt crankshafts. Also used with changing from an older style single bolt retainer crank to a three bolt. Includes 3638115M1 Thrust Block, 3638113M1 Bolts. Replaces 3638113M1, 3638115M1, 3271R021, 32186139, 3242T001, 132186139, 3242T001 (Item #: 182751, Ref: 3638115M1) $64.00

Cylinder Head - This cylinder head comes with valves, springs, guides and retainers, installed. Replaces 737772M1, 742803M91, 742805M91, 748400M91, 3637486M91. For tractor models 165, 168, 174-4S, 175, 178, 184-4S, 185, 188, 194-4S, 240, 265, 274, 274S, 274SK, 275, 284-4S, 284S, 285, 290, 294-4S, 294S, 3050, 3060, 30D, 362, 362N, 365, 372, 373, 375, 377, 382, 382N, 383, 387, 390, 393, 397, 440, 50, 50B, 50D, 50E, 50EX, 50H, 50HX, 565, 575, 590, 60H, 675, 690. All the above with either A4.212, A4.236, or A4.248 4 cylinder diesel engines. (Item #: 168497, Ref: 3640877M91) $895.00

No
Picture
Cylinder Head, Remanufactured, 37116820 - For Massey Ferguson tractor models 165, 175, 185, Compatible with Massey Ferguson Construction and industrial models 30, Replaces Massey Ferguson Casting number 37116820, 37116300/31, 37116820-1, 3711683A-1, Engine: Perkins Gas, Casting No. 37116820, 37116820-1, 3711683A-1, 37116300/31, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 203927) $990.01

Flywheel with Ring Gear - This 12 inch Fly Wheel with Ring Gear is used on multiple Massey Fergusons Tractors with 236 or 248 Perkins Engines and 12 Inch Clutches. It replaces original part numbers 41117084, 41112565, 742106M91, 3819666M91. Verify Part Numbers before ordering. For models: 165, 168, 175, 178, 185, 188, 261, 265, 275, 285S 290, 362, 365, 372, 375, 382, 390 with W4.248 with serial number up to B18008, 4225, 4235, 4325, 4335, 550, 565, 575, 590, 675, 690, 265S, 285S, 375E, 390E, 390T, 50E. (Item #: 119280, Ref: 742106M91) $390.00

Gear, Idler - 63 tooth. For tractor models 165, 168, 1745, 175, 178, 180, 184-4, 185, 188, 220, 255, 265, 270, 274-4, 275, 282, 283, 285, 290, 294-4, 30, 300, 3050, 3060, 31, 50C, 50D, 50E, 50H, 565, 575, 590, 60, 6500, 670, 6830, 6830C, 6830FC, 6860, 6870, 6880, 7830, 7830C, 7860, 7880, 8530F, 8830, 8860, 8870, 8880, (675, 690 early models with engine A4.212 or A4.248 engine), 910. Replaces 41115023. (Item #: 167783, Ref: 734738M91) $100.00

Planetary Shifter Coupler - For Massey Ferguson tractor models 30, 40, 50A, 60, 148, 158, 165, 168, 185, 188, 235, 245, 250, 255, 261, 265S, 270, 283, 285, 290, 342, 362, 365, 375, 383, 390, 390T, 393, 398, 399, 550, 565, 590, 595, 650, 670, 675, 690, 698, 699, 1080, 1085, 1200, 1250, 4215, 4220, 4235, 4245, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 4355, 4360, 4365, 4370, Compatible with Massey Ferguson Construction and industrial models 30, 30B, 30D, 30E, 40, 40B, 50A, 50C, 50D, 50E, 50H, 60, 60H, 2500, 4500, 6500, Replaces Massey Ferguson OEM number 1866557M2, 1866557M1, Teeth: 28 and 22, (Item #: 151825) $18.70

Rocker Arm (LH) - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. Replaces 747690M1, 3737A101, 3737A031, 3737A071, 3638185M1, 0520429, 957E6469 (Item #: 173476, Ref: 41151483) $14.40

Rocker Arm (RH) - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. Replaces original part numbers 3638184M1, 747691M1. (Item #: 173477, Ref: 41151484) $16.80

No
Picture
Valve Guide, Exhaust - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 166888, Ref: 3343J002) $2.70

Valve Guide, Exhaust - These Exhaust Valve Guides are used in Perkins A4.236 Diesel Engine (early block), A4.236 Diesel Engine (late block), A4.248 (liner less Flame Ring), A4.248 (liner with Flame Ring). Replaces original part numbers 31431751, 33261751, 33261752, 33261754, 33261757, 3343J001, 3343J002, 3343J021, 3638922M1, 4223074M1, 748420M1. (Item #: 166888, Ref: 748420M1) $2.70

Valve Guide, Intake - For Perkins Diesel. Replaces 33261731, 33261732, 3343F001, 3343F002, 3343F031, 3343F041, 3637056M1, 3640676M1, 4223073M1, 736297M1 (Item #: 166582, Ref: 3343F002) $3.10

Valve Tappet - This Valve Tappet (Lifter) is used on Perkins: 1103A-33, 1103A-33T, 1103B-33, 1103B-33T, 1103C-33, 1103C-33T, 1103C-33TA, 1103D-33, 1103D-33TA, 1104A-44, 1104A-44T, 1104A-44TA, 1104C-44, 1104C-44T, 1104C-44TA, 1104C-E44, 1104C-E44T, 1104C-E44TA, 1106C-E60TA, A4.212, A4.236, A4.248, A6.354, AT4.236, AT6.354, T4.236, T6.354. Replaces 291962A1, 1481642, 4222069V1, 31434163, 4222069M1, 4226515M1, 740671M1, 3142U031, 31434163, 30-3181677, 70257402, 257402 (Item #: 165600, Ref: 740671M1) $6.90

Engine Pistons and Sleeves

No
Picture
Piston - For AD3.152 Perkins Diesel. With engine serial number less than 2820092. Price is per piston. For tractor models 100, 1014, 1100, 1105, 1114, 1130, 1131, 1135, 1200, 1250, 165, 168, 174, 175, 178, 184, 185, 188, 194, 194-4, 255, 2620, 2640, 2645, 2675, 2680, 2685, 2720, 2725, 274, 274S, 274SK, 275, 284-4S, 285, 290, 294-4S, 294S, 3050, 3060, 3065, 3070, 3080, 3090, 3095, 30D, 3115, 3125, 3370, 3530, 3610, 362. (Item #: 168957, Ref: 68332) $37.30

No
Picture
Piston and Sleeve Kit - For ONE cylinder on AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 167206, Ref: U5MK0034) $72.00

Engine Rings

No
Picture
Piston Rings - For ONE cylinder on AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 120667, Ref: 836325M91) $12.90

Exhaust System

Elbow Gasket - This elbow gasket if used mounting exhaust elbow part number 1862807M1. For tractor models 24, 265S, 270, 275, 283, 298, 362, (168, 175, 178, 185, 188, all A4l236/A4.248) 165 with A4.212 Engine, (290, 575, 590, all with Engine Types A4.235, A4.248 ALL with exhaust Outside Hood) (Item #: 111886, Ref: 194742M1) $2.20

Exhaust Elbow - For tractor models 24, 265S, 270, 275, 283, 298, 362, (168, 175, 178, 185, 188, all A4l236/A4.248) 165 with A4.212 Engine, (290, 575, 590, all with Engine Types A4.235, A4.248 ALL with exhaust Outside Hood). Does not come with gasket. Uses gasket Part Number 194742M1. (Item #: 111885, Ref: 1862807M1) $26.10

Manifold - For tractor models (175, 184-4, 270, 283, 290, 31, 362, 50E, 50H, 60H), 165 with A4.236 Engine, (168, 178, 185, 188 all with Engine Type A4.236/A4.248) 60 Back Hoe, (6500, 6800H all Forklift) (24, 25 all handler) 11 Loader, 220 Skidder. Exhaust Manifold is used with a 90 Degree Elbow. Replaces 37781781, 736206M1. (Item #: 101630, Ref: 733206M1) $35.80

Muffler - New Muffler measures A= 2-1/2 inch inlet length, B= 2-1/8 inch inlet inside diameter, C= 24-3/8 inch shell length, D= 17-1/4 inch outlet length, E= 1-3/4 inch outlet outside diameter, F= 44-3/4 inches overall length. For tractor models 165, 168, 174-4S, 175, 178, 184-4S, 185, 188, 194-4F, 274, 274S, 274SK, 294S-4S, 40, 50, 50E, 65, 765. (Item #: 102435, Ref: 898228M94) $65.00

Muffler Pipe Gasket - Exhaust Elbow Gasket. Perkins Engines (Item #: 101628, Ref: 3640488M1) $2.00

Fuel System / Air Intake

Air Cleaner Assembly, Oil Bath - For tractor models (165, 50 with AD4.203 Perkins engine), (765 with AD4.212 Perkins engine), (168, 175 with A4.236 Perkins engine), (178, 185, 188 with A4.248 Perkins engine). Can be adapted to other applications. Replaces 001210V91, 001210U91, 1886673M92, 1884278M91, 1886673M93, 1886 673M93, 1886673M94, 3824173V91, 3824173M91, 883914M94, 883914V94, 883914M1 (Item #: 184415, Ref: 1886673M94) $105.67

Air Cleaner Hose - For tractor models 175, 185. (Item #: 173134, Ref: 884545M1) $50.62

Air Cleaner, Oil Bath - For tractor models (50 industrial, 165 with AD4.203 or A4.212 Perkins engine), (765 with AD4.203 Perkins engine), (168, 175 with A4.236 Perkins engine), (178, 185, 188 with A4.248 Perkins engine). Replaces 898390M1, 898390M91 (Item #: 170184, Ref: 898390M1) $58.00

Fuel Cap - This fuel cap may come bare metal or painted red. NOTE: EXTERNAL LOCK TABS. Used on Massey Ferguson 158, 20, 20B, 20D, 20E, 20F, 30D, 30E, 30H, 40, 40E, 50B, 50D, 50E, 50F, 50H, 60H, 6500H (FORK LIFT), 6800 (FORK LIFT), 1080, 135, 135 UK, 148, 155, 165 UK, 168, 175 UK, 178, 185, 188, 231, 240, 240P, 250, 253, 260, 261, 270, 275 UK, 283, 290, 298, 35, 35X (FE), 50, 550 UK, 560, 565, 575, 590, 595, 65, 670, 675, 690, 698, 698T, 699. Replaces 1077576M1, 1666439M91, 1698042M91, 1876534M91, 1876534V91, 3762586M92, 3762586M93, 828583M91, ATJ3092, 001584U91, 1103177 (Item #: 153639, Ref: 1876534M1) $13.60

Fuel Filter Screw Kit - Used on many tractors, this screw kit is used in CAV style diesel fuel filter assemblies. Replaces OEM numbers D2NN9N090B, 81829151, 7111-604, 7111-860. Used on Massey Ferguson 133, 135, 140, 145, 152, 155, 158, 165, 168, 174-4, 175, 178, 184-4, 185, 188, 194, 20F, 230, 231, 240, 243, 250, 253, 2620, 2625, 263, 2640, 2645, 265 S (TR), 2680, 2685, 2725, 274-4, 275, 284-4, 285 S (TR), 290, 294-4, 3080, 3090, 30H, 3610, 3630, 364, 3650, 375E Brazilian, 390E Brazilian, 4225, 4235, 4245, 4255, 4265, 4325, 4335, 4345, 4365, 530, 560, 565, 592, 595, 6235, 6245, 6255, 6265, 660 Brazilian, 840 (Item #: 179631, Ref: D2NN9N090B) $13.10

Fuel Injection Pump - For Massey Ferguson tractor models 135, 185, 245, 285, Replaces Massey Ferguson OEM number 3830F070, Replaces CAV - Lucas manufacturer number DPA3230F070, (Item #: 162274) $909.00

Fuel Sending Unit - For Massey Ferguson tractor models 50, 165 (UK), 168, 175 (UK), 178 (UK), 185, 188, Compatible with Massey Ferguson Construction and industrial models 50B, Replaces Massey Ferguson OEM number 897389M91, (Item #: 115586) $33.70

Fuel Shut Off - Fuel shut-off and strainer. For odels: 165, 168, 175, 178, 185, 188, 265, 270, 275, 282, 285, 290, 298, 50E, 50F, 50H, 565, 575, 590, 60H, 6500, 675, 6800H, 690. All with either A4.212, A4.236, A4.248 engines. Replaces 890438M1. (Item #: 151836, Ref: 898580M91) $11.10

Fuel Tank Mounting Bushing - This fuel tank mounting bushing may come not looking exactly like pictured. There are slight variations. Rubber bushing is 15/16 tall with a 1/4 diameter bolt. For tractor models 165, 168, 175, 178, 185, 188, 265, 270, 275, 285, 290, 298, 30D, 30E, 392S, 50E, 50B, 50D, 50F, 50H 60H, 283 UK. (Item #: 151856, Ref: 883623M1) $7.20

Heater Plug - Heater Plug Thermostat Burner with Thread Connector. Also replaces 13H2468 and 2666103. For 1007, 1014, 1114, 1134, 1250, 135, 148, 165, 168, 174, 175, 178, 185, 188, 20B, 20D, 20E, 20F, 230, 240, 250, 255, 265, 274SK, 275, 285, 290, 3050, 3060, 3065, 3070, 30D, 30E, 30H, 35, 350, 353, 355, 360, 363, 365, 373, 375, 377, 383, 387, 390, 390T, 393, 397, 398, 399, 40E, 50, 50B, 50D, 50E, 530, 535, 550, 560, 565, 575, 590, 60H, 65, 660, 665, 675, 690, 698, 699, 800, 805, 820, 825, 830, 835, 840, 845. Replaces 2666103, 893501M91, 893501M1, 893501V91 (Item #: 129233, Ref: 893501M1) $15.60

Injector Shield - This injector shield is used on Perkins Diesel engines. Three or more used depending on the application. Replaces original part numbers 33817114, 732824M1 (Item #: 168622, Ref: 732824M1) $1.60

Manifold Heater - Thermostart Intake Manifold Heater on Perkins Diesel Engines. For tractors: MF154-4, MF184-4, MF240, MF250, MF270, MF274-4, MF399, MF670, MF690, MF698, MF3070, MF3090. Replaces Perkins 2666108, Massey Ferguson 1446935M1, 3583453M2, 3583543M2, 3583543V2, 893501M91. (Item #: 118792, Ref: 3583543M2) $10.90

Gauges

Fuel Gauge - 12 Volt, Chrome Bezel, Black Face. For tractor models 135, 148, 165, 168, 175, 185, 188. For tractor models with positive ground. (Item #: 113478, Ref: 894844M1) $28.30

Oil Pressure Gauge - For tractor models FE35, TEA20, 135, 148, 165, 168, 175, 178, 185, 188, 35, 65, 765, TO35 with STD. DIESEL ENGINES. (Item #: 104108, Ref: 1853097M91) $21.80

No
Picture
Tachometer Cable - Tachometer Cable Assembly, 54 inches long, 1/2 inch UNF drive end, and 5/8 inch UNF load end. For tractors: FE35, 35X, MF270, MF282, MF290L, 1080, 165, 168, 175, 178, 180, 185, 188, 271, 275, 283, 281 and Industrial: 30D, 50E. Replaces 876289M92, 827855M1, 1876289M93 and 960941M1. (Item #: 104135, Ref: 882021M91) $11.60

Tachometer Cable Gearbox - This tachometer gear box has a 1/2 inch UNF cable fitting. For tractor models 1080, 165, 168, 175, 178, 185, 188, 265, 275, 285, 290, 298, 565, 575, 590, 595, 675, 690, 698, 698T, 699. Tachometer Gearbox has a 1/2 inch cable inlet fitting. (Item #: 121518, Ref: 1446059M1) $33.90

Hitch / Drawbar

Fork - Fork, leveling box, extra heavy-duty, for 1 inch shaft. 1 inch threads 17 5/16 inches long and 7/8 inch fork spread. Used with extra heavy-duty leveling box 8907649EX-HD on tractors: MF65, MF165, MF175, MF265. Fork can also be used on tractors: MF185, MF275, MF283, MF285, MF375, MF383. For MF165, MF175, MF185, MF265, MF275, MF283, MF285, MF375, MF383, MF65. (Item #: 172795, Ref: 1861392M3) $39.87

No
Picture
Heavy Duty Leveling Box Knuckle - For Massey Ferguson tractor models 65, 165 (UK), 175 (UK), 175, 180, 185, 235 (UK), 240, 245, 250, 255, 265, 270 (UK), 271, 275 (UK), 275, 281, 283 (UK), 283, 285, 290 (UK), 298 (UK), 350 (UK), 360, 362, 375, 383 (UK), 383, 390, 390T, 393, 398, 399, 461, 543, 670, 690, 698, 699, 1080, 1085, 3050, 3060, 3065, 3070, 3075, 3080, 3090, 3095, 3120, 3125, 3140, Compatible with Massey Ferguson Construction and industrial models 30, 30E, 31, 40E, 50C, 50D, 50E, 203, 205, 302, 304, 3165, Replaces Massey Ferguson OEM number 897653M2, 893560M1, 897653M1, 897653V2, (Item #: 176231) $16.20

No
Picture
Heavy Duty Yoke, Left Hand - For Massey Ferguson tractor models 175, 185, 265, 270 (European), 275, 285, 375 (HD), 383 (European), 390 (European), 390T, 393 (European), 398 (European), 399, 461, 670 (European), 690 (European), Compatible with Massey Ferguson Construction and industrial models 50E, Replaces Massey Ferguson OEM number 1863057M91, 1863057V91, 1863888M1, 1863888M91, Replaces manufacturer number VPL2206, Overall Length: 15", Pin Hole Size: 3/4", Yoke O.D.: 3", Yoke I.D.: 1.875", Rod Diameter: 1", (Item #: 173303) $49.51

Leveling Box Assembly, RH, Heavy Duty, Less Fork - Adjustment from 24.00 inches to 32.00 inches. For tractor models 175, 185, 265, 270 UK, 275, 285, 375, 383 UK, 390 UK, 393 UK, 398 UK, 50E, (670, 690 France). (Item #: 163453, Ref: 1864977M92) $71.00

No
Picture
Lift Link Yoke Clevis Pin - For Massey Ferguson tractor models 65, 135, 165, 168, 175, 178, 180, 185, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 392S, 393, 394, 399, 451, 461, 471, 481, 491, 492, 543, 575, 583, 590, 596, 670, 675, 690, 698, 699, 1080, 1085, 3050, 3060, 3070, 3080, 3090, 3095, 3120, 3125, 3140, Compatible with Massey Ferguson Construction and industrial models 20F, 30, 30E (UK), 31, 40, 40B, 40E, 40E (UK), 50C, 50D, 50E, 203, 205, 302, 304, 3165, Replaces Massey Ferguson OEM number 3582662M1, 893567M1, Fits Massey Ferguson tractor models 299, 765, (Item #: 174723) $7.90

Lower Lift Arm Pin - Used on tractors with square axles, this pin is 5 1/2 inches long and 1 1/8 inches in diameter. Replaces part numbers 906263M2, 1695314V1, 1695314M1, 1695531M1, 1867243M1, 354101X1 (Item #: 173351, Ref: 1695314M1) $13.60

Lower Lift Arm, RH or LH, CAT II - This replacement Lower Lift Arm is Category II on both ends. It measures approximately 38 inches center to center on the balls. Used on 165, 168, 185, 188, 260, 261, 265, 275, 282 UK, 282 US Built, 285 (FR), 360, 362, 365, 372, 375, 375E Brazilian, 390, 390T, 575, 675. Replaces 1869218M1, 1863435M94, 1863435M95, 1863436M94, 1869219M1, 810285M92, 886428M1, 893430M93. (Item #: 173308, Ref: 1863435M95) $163.25

Retaining Clip Ring - For Massey Ferguson tractor models TE20, TEA20, 35, 35X, 50, 65, 135, 148, 150, 165, 168, 175, 178, 180, 185, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 271, 275, 281, 282, 283, 285, 290, 298, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 393, 396, 398, 399, 431, 461, 543, 575, 590, 675, 690, 698, 699, 3050, 3060, 3070, 3080, 3090, 3095, 3140, Compatible with Massey Ferguson Combine (s) 550, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 193092M1, (Item #: 173702) $3.60

RH Heavy Duty Level box Assembly. with Fork - For tractor models 175, 185, 265, 275, 375HD, 50E, (670, 690 ALL FRANCE), (270, 383, 390, 393, 398 ALL UK). Adjustment from 24.000 inches to 32.000 inches center to center hole. (Item #: 172700, Ref: 1863053M94) $119.00

Stabilizer Pin - This Pin is used with telescoping stabilizers and with 514992M2 bracket. Uses 186809M1 Nut, sold separately. It replaces original part number 521006M1. Large shoulder 1.10 in. dia x 1.23 in. long, smaller shoulder .862 in. dia x 2.28 in. long. Threads 3/4 - 16 UNF Right Hand Thread (Item #: 170300, Ref: 521006M1) $22.70

Stabilizer Pin - For Massey Ferguson tractor models 35, 50, 65, 135, 150, 165, 168, 175, 180, 185, 265, 275, 282, 360, 383, 398, 399, 565, 575, Compatible with Massey Ferguson Construction and industrial models 20, 30, 30B, 30D, 31, 40, 40B, 50C, 50D, 220, 302, 304, 356, 2135, 3165, Replaces Massey Ferguson OEM number 893420M1, 354568X1, Length: 3", Pin Diameter: .867", Pin Hole: .388", Thread: UNF - 3/4" -16, (Item #: 170492) $6.70

Stabilizer Pin Nut - This Stabilizer Pin Nut is used with 521006M1 Pin. It is 3/4 16 UNF Right Hand Thread. It replaces original part number 3609473M1, 186809V1, 186809M91, 186809M1, 767743 (Item #: 116643, Ref: 186809M1) $2.40

Top Link Pin, Hinged - Hinged Top Link Pin. Category I, hinged upper hitch pin assembly 3/4 inch diameter, 9-5/8 inch useable Length. For tractors: TO35, MF35, F40, MF50, MF65. For MF135, MF150, MF35, MF50, TO35 and others. Replaces 180901M91, 180901M1 (Item #: 173190, Ref: 180901M91) $6.70

Hydraulic System

Control Valve Pin and Roller Kit - This Pin and Roller Kit is used on multiple Massey Ferguson Models in the control valve assembly. Replaces OEM part numbers: 897599M1, 897504M1X1, 897599M1X2, 897504M1 (Item #: 173324, Ref: 897504M1) $0.90

Draft Control Rod - This is a new Draft Control Rod. It is used on many Massey Ferguson Ag and Industrial applications. Replaces OEM number 898124M1 (Item #: 173302, Ref: 898124M1) $12.70

Draft Control Seat - This Draft Control Spring Seat is used on many Ferguson, Massey Ferguson and Massey Harris tractors. 1.780 inch inside diameter. It replaces OEM numbers: 719011M1, 182581M1, 886351M1, 889346M2, 886351M2 (Item #: 174656, Ref: 182581M1) $15.00

Draft Control Spring - This New Draft Control Spring is used an many Massey Ferguson Ag and Industrial models. Replaces OEM numbers 898127M1, 898127M2, 1660323M1, 1660323V1 (Item #: 180233, Ref: 898127M2) $5.70

Hydraulic Cylinder Stud, 3 Inch - Hydraulic Cylinder Stud is used with 190859M1 Cylinder. It is 9/16 inches in diameter (9/16 UNF Thread). This is used for replacement of 1/2 inch studs when re-drilling lift cover to accommodate the 9/16 studs. This is a 3 Inch Stud. Verify length before ordering. Replaces 1667579M1, 1667580M1, 1667580M2, 899258M1 (Item #: 173649, Ref: 899258M1) $7.70

Hydraulic Cylinder Stud, 4 Inch - Hydraulic Cylinder Stud is used with 190859M1 Cylinder. It is 9/16 inches in diameter (9/16 UNF Thread). This is used for replacement of 1/2 inch studs when re-drilling lift cover to accommodate the 9/16 studs. This is a 4 Inch Stud. Verify length before ordering. Replaces 1667579M2, 1667579M1, 908934M1, 899257M1. (Item #: 173644, Ref: 899257M1) $5.30

Hydraulic Cylinder Stud Nut - Hydraulic Stud Nut is used with 899258M1 and 899257M1 Studs. It is 9/16 UNF Thread (Din 934). Replaces 368749X1 (Item #: 173194, Ref: 368749X1) $11.20

Hydraulic Filter Kit - This Kit contains 521451M1 filter, 185839M91 cap and 185555M1 bowl. It is used on Massey Ferguson models: 1080, 135, 145, 148, 150, 165, 168, 175, 178, 180, 185, 188, 20, 2135, 245, 30, 31, 3165, 35, 35X, 40, 50, 65, FE35 (Item #: 184914, Ref: 185839M92) $27.40

Hydraulic Lever, Tension Bolt and Spring Kit - This Hydraulic Lever, Tension Bolt and Spring Kit is used on multiple Massey Ferguson Models. Replaces: 181041M1, 961469M1, 961369M1. (Item #: 173300, Ref: 181041M1) $2.70

Hydraulic Pump Camshaft - This new Hydraulic Pump Camshaft has 10 Splines. It is used on some Massey Ferguson Models: 1085, 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 20, 2135, 285, 30, 31, 3165, 40, 50. Some of these models used a 21 spline shaft. Verify before ordering. Replaces part numbers: 1809105M91, 1809048M1, 889154M91, 899154M91, 899915M92 (Item #: 165602, Ref: 1809105M91) $83.00

Hydraulic Pump Camshaft Bushing - This Hydraulic Pump Camshaft Bushing is used on MK1 and MK2 Pumps. It has an inside diameter of 1-3/8 inches, outside diameter of 1-5/8 inches and is 7/8 inches wide. Replaces OEM numbers: 1664491M1, 1664491M2, 195949M1, 1865012M1, 1865012M1 (Item #: 167290, Ref: 1664491M1) $5.60

No
Picture
Hydraulic Pump Kit, MK III, 25 mm - For Massey Ferguson tractor models 133, 135, 140, 148, 150, 158, 165, 168, 174, 175, 178, 184, 185, 188, 194, 230, 231, 233, 234, 235, 240, 243, 245, 250, 253, 254, 255, 260, 261, 263, 265, 265S, 273, 274, 275, 283, 284, 285, 285S, 290, 294, 298, 340, 342, 350, 353, 353LX, 355, 356, 360, 362, 363, 364, 364S, 365, 372, 373, 374, 374S, 375, 377, 382, 383, 384, 384S, 387, 390, 390T, 393, 394, 394S, 396, 397, 398, 399, 440, 550, 560, 565, 575, 590, 592, 595, 675, 690, 698, 699, 1200, 1250, 4225, 4235, 4240, 4245, 4260, 4265, 4270, 4315, 4325, 4345, 4355, 4360, 4365, 4370, Compatible with Massey Ferguson Construction and industrial models 20B, 20D, 20E, 30D, 30E, Replaces Massey Ferguson OEM number 1810860M93, 1810860M92, Mark III Pump, 25 mm, (Item #: 168738) $214.50

Hydraulic Pump Kit, MKII Piston, 25 mm - For Massey Ferguson tractor models 133, 135, 140, 148, 150, 154, 155, 158, 165, 168, 174, 175, 178, 184, 185, 188, 194, 595, 1080, 1200, Compatible with Massey Ferguson Construction and industrial models 194, Replaces Massey Ferguson OEM number 1810859M91, 1810859M10, Mark II Pump, (Item #: 168705) $234.68

Hydraulic pump o-ring and gasket kit - For tractor models 595 with MK2 pump, (240, 250, 265, 275, 290, 550, 565, 575, 590, 675, 690, 698 all with MK2 pumps). (Item #: 165750, Ref: 1810680M1) $14.60

Hydraulic Pump Rear Cam Block, Used - For Massey Ferguson tractor models F40, TO35, 30, 31, 35, 50, 65, 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 205, 230, 235, 240, 245, 250, 265, 275, 285, 290, 298, 350, 355, 365, 375, 390, 398, 399, 565, 575, 590, 595, 675, 690, 698, 699, 1080, 1085, 2135, Compatible with Massey Ferguson Combine(s) 40, 550, 765, Compatible with Massey Ferguson Construction and industrial models 20, 30, 40, 202, 203, 204, 302, 304, 765, 2200, 2220, 3165, Replaces Massey Ferguson OEM number 894608M1, For a new version of this item use Item #: 113790, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460533) $13.26

No
Picture
Hydraulic Pump Rebuild Kit - For Massey Ferguson tractor models 30, 135, 148, 150, 165, 168, 175, 178 (UK), 180, 185, 188, 230, 240, 250, 265, 275, 285, 290, 298, 350, 355, 365, 375, 390, 398, 399, 690, 698, 699, 1080, All late production, Piston Bore: 0.985", Chamber Ports Measuring: (2) .385", (1) .510", (1) .328", Includes: (2) Valve Chambers, (1) Front Camblock, (1) Rear Camblock, (2) Hydraulic Pistons, (4) Piston Rings + other associated Seals, O-Rings and Gaskets, (Item #: 177040) $233.00

Hydraulic Pump Strainer Assembly - Verify measurements of 2 7/16 inch outside diameter, 1 5/8-7/16 inch inside diameter, 3 3/4 inch height. For tractor models 1080, 1085, 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 20, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 35, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 393, 398, 399, 40, 50C, 550, 565, 575, 590, 595, 65, 670, 675, 690, 698, 698T, 699, 765. Hydraulic Pump Strainer also replaces 1687042M91, 1687042V91, 1810744M91, 1870199M92, 1687042M1. (Item #: 116132, Ref: 1687042M91) $10.60

Hydraulic Pump Support Peg - This hydraulic pump support peg has a step (shoulder) on the pin. The diameter steps from 9/16 inches to 7/16 inches. If you need a straight pin peg, use part number 180905M1. If you need a gasket order part number 180904M1, sold separately. Replaces 898643M1. (Item #: 173297, Ref: 898643M1) $11.20

Hydraulic Pump Support Peg with Hand Bake - Used on Massey Ferguson models: 165, 168, 175, 178, 185, 188, 20F, 230, 240, 250, 253, 261, 275, 283, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E. This peg supports the hydraulic pump on the inside of the tractor, and a hand brake on the outside of the tractor. If you need a gasket, order part number 180904M1. (Item #: 189383, Ref: 898937M1) $37.60

Hydraulic Pump Support Pin Gasket - This hydraulic pump support pin gasket is used with 180905M1 and 898643M1 hydraulic pump support pins. It replaces 180904M2, 180904M1. (Item #: 167222, Ref: 180904M1) $0.70

Hydraulic Stand Pipe O-Ring - This Hydraulic Stand Pipe O-Ring measures 3/8 inch inside diameter, 1/2 inch outside diameter, 1/16 width. Two are used per stand pipe. Replaces Massey Ferguson part number 195561M1 (Item #: 124228, Ref: 195561M1) $0.50

Hydraulic Stand Pipe Spiral Back Up Ring - This Hydraulic Stand Pipe Spiral Back Up Ring is used on many Massey Ferguson Models. Two are used per stand pipe. Sold individually. Replace part number 195874M1 (Item #: 124229, Ref: 195874M1) $1.80

Hydraulic Valve - For tractor models 1080, 135, 148, 165, 168, 175, 178, 185, 188, 20C, 230, 240, 245, 250, 255, 265, 275, 285, 290, 298, 30, 30B, 30E, 31, 350, 355, 365, 375, 390, 398, 399, 40, 40B, 50C, 50E, 550, 565, 575, 590, 595, 675, 690, 698, 698T, 699. This valve is 7.75 inches long. Replaces 3000261X1, 1870763M92, 1681786M1 (Item #: 165752, Ref: 1870763M92) $39.20

Lift Pump Overhaul Kit - Repairs OEM pumps 1868435M3 or 888185M1. For tractor models 1080, 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 2040, 230, 240, 250, 265, 275, 285, 290, 298, 30, 350, 355, 365, 375, 390, 398, 399, 550, 565, 575, 590, 595, 675, 690, 698, 698T, 699. Hydraulic Pump Overhaul Kit contains (2) A-1868435M2, (2) A-1860038M1, A-180924M2, A180925M2, (4) A-897493M1, A-1810584M2, A-1810680M92. Valve Chambers have 4 holes, 3/8 inch mounting bolt holes with .524 oil hole. (Item #: 173258, Ref: 556603) $186.00

Lift Pump Repair Kit - For 1080, 135, 148, 165, 168, 175, 178, 185, 188, 20E, 230, 240, 250, 253, 265, 275, 285, 290, 298, 35, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 392S, 398, 399, 40E, 550, 565, 575, 590, 595, 65, 690, 698, 698T, 699, 765, 965. Hydraulic Lift Pump Repair Kit contains (4) rings, (4) springs, (2) valves, (2) lock rings. (Item #: 173072, Ref: 1810678M91) $14.70

Lift Pump seal kit - For tractor models TO35, 135, 148, 165, 168, 175, 175S, 185, 188, 240, 250, 265, 290, 550, 565, 575, 590, 65, 675, 690, 698, 765, 595 WITH MK2. Replaces 894906M91. (Item #: 184402, Ref: 1810467M91) $5.70

Lift Pump Valve Assembly - This Lift Pump Valve Assembly measures 7.5 inches in length and is for tractor models 1080, 135, 148, 150, 165, 168, 175, 178, 185, 188, 20C, 20D, 20E, 20F, 240P, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 392S, 393, 398, 399, 40, 40B, 40E, 50C, 50D, 50E, 550, 565, 575, 590, 670, 675, 690, 698, 698T, 699. Valve is 7.5 inches long. (Item #: 165752, Ref: 1681789M91) $39.20

Lift Pump Valve Assembly. - For tractor models 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 202, 203, 204, 205, 2135, 2200, 30, 302, 304, 3165, (40, 50 ALL INDUSTRIAL MODELS). Replaces 1660209M92. (Item #: 179514, Ref: 1862486M96) $49.40

Overload Stop - For tractor models 1080, 1085, 135, 135UK, 150, 165, 165UK, 175, 175UK, 178UK, 180, 20, 202, 203, 204, 205, 20, 2200, 230, 235, 240, 245, 250, 253, 262, 263, 265, 270, 275, 275UK, 282, 283UK, 185, 290, 290UK, 292, 298, 30, 302, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 40, 40E, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50, 65, 670, 690, 698, TO35. Overload Stop is round plate with single hole. (Item #: 172681, Ref: 180981M1) $5.70

Pressure Control Shaft Roller - This Pressure Control Shaft Roller measures 1/4 inch X 5/8 inch X 3/8 inch. It is used on some of the following Massey Ferguson 1080, 1085, 1200, 133, 135, 140, 148, 150, 152, 165, 168, 175, 178, 180, 185, 188, 20, 202, 204, 20B, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 372, 375, 382, 383, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50C, 50D, 50E, 50EX, 550, 565, 575, 590, 595, 670, 675, 690, 698, 698T, 699. Many of these models used more than one size roller. Verify measurements or OEM number before ordering. Replaces: 898196M2, 898196M1 (Item #: 179727, Ref: 898196M2) $3.90

Quadrant Support - This Quadrant Support is used on Massey Ferguson 135UK serial 439191 and up, 165UK serial number 132849 and up, 230 with Lift Cover 1870952M91, 231, 235 with Lift Cover 1870955M1, 255, 265, 270, 275, 282, 283, 290, 298, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 670, 390, 698, 699, Industrial 20 with Lift Cover 1870955M1, 20C with Lift Cover 1870950M91, 20D, 20E, 20F, 30 with Lift Cover 1870955M1, 30B, 30D, 30E, 40 with Lift Cover 1870955M1, 40B, 40E, 50C, 50D, 50E. Replaces 1870240M1 (Item #: 164696, Ref: 1870240M1) $32.10

Standpipe, Hydraulic - Used on models with pressure control, 12.5 inches long. For tractor models 150, 175, 180, 235, 245, 30, 31, (175, 178 serial number up to 709936), (135 serial number up to 79481), (165 serial number up to 520708), (185 serial number up to 320843). (Item #: 173347, Ref: 883788M91) $28.60

Lights

Headlight Assembly, RH - Replaces 3038174M91, 3038175M91. For tractor models 1080, 135 145381> with plastic cowl, 148, 155, 158, 165 584071> with plastic cowl, 168, 175 741981>, 178 741981>, 185, 188, 20D, 20E, 230, 240, 250, 254-4 22210641 >, 265, 2675, 2705, 2745, 275, 2775, 2805, 282, 290, 294-4, 298, 50F, 50H, 575, 590, 595 J222029>, 60H, 675, 690, 698, 698T, 699. (Item #: 117736, Ref: 1672768M91) $28.30

Headlight, LH - Replaces 1860176M1, 1890155M1, 1874192M92, 3038174M91, 3038175M91. For tractor models 1080, 135 145381> with PLASTIC COWL, 135 UK MODEL serial number 145381>, 148, 155, 158, 584071> with PLASTIC COWL, 165 UK, 168, 175 741981>, 175 UK, 178 741981>, 178 771981>, 178 UK, 185, 188, 20D, 20E, 230, 240, 250, 254-4, 265, 2675, 270, 2705, 274-4, 2745, 275, 2775, 2805, 282, 285, 290, 294-4, 298, 50F, 50H, 550, 565, 575, 590, 595 J222029>, 60H, 670, 675 J222029>, 690, 698, 698T J222029>, 699. 5 1/2 inches lens outside diameter. (Item #: 117737, Ref: 1672769M91) $33.10

Miscellaneous

No
Picture
Hydraulic Inner Shaft - For Massey Ferguson tractor models 135, 148, 165, 168, 175, 185, 188, 230, 240, 250, 265, 275, 285, 290, Replaces Massey Ferguson OEM number 899277M92, (Item #: 166037) $3.40

No
Picture
Mounting Plate for Auxiliary Hydraulic Pump - For Massey Ferguson tractor models 50, 135, 148, 165, 168, 175, 178, 185, 188, Replaces Massey Ferguson OEM number 998668M91, 10 Spline, For 21 Spline Mounting Plate use Item #: 165542, (Item #: 165541) $588.00

Pressure Control Shaft - For Massey Ferguson tractor models 135, 148, 155, 158, 165, 168, 185, 188, 230, 235, 240, 245, 250, 265, 275, 285, 290, 298, 550, 565, 575, 590, 675, 690, 698 (T), 699, Replaces Massey Ferguson OEM number 1870220M92, 1870220M93, (Item #: 113391) $2.20

Oil System

Oil Pan Drain Plug - This is a 3/4 inch 16 thread Oil Pan Drain Plug. Uses C9NN6734A washer, not included. It replaces original part numbers 376501X1, 735129M91, 748160M1 (Item #: 140610, Ref: C9NN6730B) $3.40

No
Picture
Oil Pan Drain Plug - For Massey Ferguson tractor models 35, 135, 148, 154-4, 165, 168, 175, 178, 184-4, 185, 188, 240, 243, 250, 253 (T3.152.4 engine), 254, 255, 261, 263 (T3.152.4 engine), 274, 285, 290, 360, 362, 363, 365, 375, 383 (A4.248 engine), 390, 390T, 393, 396 (6.60 engine), 398, 399, 430, 431, 451, 461, 471, 481, 491, 492, 543, 565, 575, 583, 590, 595, 596, 650, 675, 680, 690, 698, 1080, 1100, 2620 (s/n S271212 -earlier), 2640 (s/n S271212 -earlier), 2645 (s/n S271212 -earlier), 2680 (s/n S271212 -earlier), 3050, 3060, 3065, 3070, 3075, 3080, 3090, 3095, 3115, 3120, 3120 (turbo), 3125, 3630, 3645, 3650, 3655, 3660, 4215, 4220, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4315, 4320, 4325, 4345, 4355, 4360, 4365, 4370, 5275, 5285, 5290, 5300, 5320, 5425, 5435, 5445, 5450, 5455, 5460, 5465, 5475, 6140, 6150, 6170, 6180, 6190, 6235, 6245, 6255, 6260, 6265, 6270, 6280, 6290, 6445, 6455, 6460, 6465, 6470, 6475, 6480, 7465, 7475, 8110 (T6.60 engine), 8120, 8130 (T6.60 engine), 8210, 8220, Compatible with Massey Ferguson Combine (s) 530, 535, 565, 660, 750, Compatible with Massey Ferguson Construction and industrial models 20D, 40, 50, 50B, 2135, 2200 Replaces Massey Ferguson OEM number 376501X1, 748160M1, , Compatible with Perkins Engine (s) 1006-6T, Replaces Perkins OEM number 2487004, Replaces JCB OEM number 02100072, 02101691, Replaces manufacturer number VPC4400, Fits JCB Dump Truck (s) 712, 716, Fits JCB Wheel Loader (s) 425, Gasket not included, (Item #: 173857) $3.20

Oil Pan Drain Plug Washer - Used with C9NN6730B 3/4 inch Oil Pan Drain Plug. (Item #: 140611, Ref: C9NN6734A) $1.60

Oil Pickup Strainer - Used on Perkins A4.212, A4.236 and A4.248 engines, this part replaces; Massey Ferguson part number 734839M91, Perkins part number 37725443. (Item #: 179650, Ref: 734839M91) $25.30

PTO / Driveline

PTO Brake Pad - Replaces 888739M1, 1662242M2. For tractor models 1080, 135, 148, 155, 158, 165, 168, 185, 188, 240, 265, 275, 285, 290, 298, 340, 350, 355, 360, 365, 375, 390, 390T, 398, 399, 550, 565, 575, 590, 595, 675, 690, 698, 699. (Item #: 105641, Ref: 1662242M2) $38.40

PTO Clutch Spring - Used on tractors with Independent Power Take Off (IPTO) on Massey Ferguson 1004, 1004T, 1200, 1250, 133, 135, 140, 148, 152, 155, 158, 165, 168, 185, 188, 20E, 230, 240, 250, 253, 255, 260, 2620, 2640, 265, 2680, 270, 2720, 275, 285 (FR), 290, 290 Brazilian, 290 US Built, 298, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 30E, 3115, 3120, 340, 350, 355, 360, 362, 365, 375, 375E Brazilian, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40E, 50E, 50H, 550, 560, 565, 575, 590, 592, 595, 60H, 670, 675, 690, 698, 698699, 698T, 699. Replaces 1660406M1, 3795274M1, 514210M1, 1870857M1 (Item #: 117299, Ref: 1660406M1) $7.20

PTO Gear - This is first gear for the PTO. For tractor models 135, 148, 150, 168, 185, 188, 20, 20C, 230, 235, 245, 255, 265, 270, 275, 282, 283, 285, 30, 31, 40, 40B, 50C, 50D, 50E, 565, 575, 590, 165 STANDARD TRANSMSSION/MULTI-POWER SERIAL NUMBER 130774->. For 8 speed transmission, 53 teeth, 21 splines. (Item #: 166907, Ref: 1868532M1) $76.00

PTO Housing Retainer O-Ring - This O-Ring is 3/16 inch in diameter and has a 2-7/8 inch inside diameter. It replaces OE numbers 195522M1, 70923936, 81801571, C5NN533A (Item #: 173311, Ref: 195522M1) $0.90

PTO Seal Retainer Housing - This Seal Retainer Housing is used on many Massey Ferguson tractors. Uses 195522M1 o-ring, not included. Replaces part numbers 180465M1, 180465V1 (Item #: 151850, Ref: 180465M1) $22.80

PTO Seal Shield - This PTO Seal Shield is used on many Massey models with single speed PTO, including; (165UK Engine Serial number 144682 and up), (230 Rear Axle Serial Number FD101, CD8020 and up), 231, 231S, (235 Transmission Serial Number FD101 and up), 240 up to Engine Serial Number P38370), 245, 250, (253 up to Engine Serial P38370), (255 Wet Brakes), 282, 283, )283 Brazil up to Serial Number 2915), 290, (360, 375, 383, 390, 390T up to Engine Serial Number P38370), 670, 690, 698, 699, (20 Rear Axle Serial Number FD101, CD8028 and up), 20C, 20D, 20E, (20F up to Serial Number 5101D0782), (30 Wet Brakes), 30B, 30D, 30E, (31 Rear Axle Serial Number FD101, CD8020 and up), (40 Wet Brakes), 40B, 40E, 50C, 50D, 50E. Replaces 533183M1. Verify Part Number before ordering. (Item #: 179732, Ref: 533183M1) $3.70

Retaining Plate - Used to retain the PTO Seal Housings 532880M1 and 180465M1, this part replaces Massey Ferguson part numbers 1663254M1, 532887M2, 184365M3. Used on 1004, 1004T, 1200, 1250, 133, 135, 140, 145, 148, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 230, 231, 235, 240, 243, 245, 250, 253, 255, 260, 261, 2625, 263, 2635, 265, 265S, 270, 275, 282, 283, 285, 285S, 290, 298, 30, 30B, 30D, 30E, 31, 3165, 340, 342, 350, 352, 355, 360, 362, 365, 372, 375, 375E, 382, 390, 390E, 390T, 396, 398, 399, 40, 40B, 40E, 410, 420, 50, 50C, 50D, 50E, 50H, 560, 565, 575, 590, 60H, 65, 675, 690, 698, 698T, 699, 765. Many of the models listed had more than one PTO system, verify part number before ordering. (Item #: 179426, Ref: 532887M2) $21.30

No
Picture
Sealing Ring - Sealing Ring, Used on Independent PTO Clutch Packs (2) used. (Item #: 183806, Ref: 541551M1) $7.40

Seats

Backrest Cushion - Backrest cushion: 185, 210, 220, (Davis)~ 202, 204, 1001 Fork Lifts. For 1001, 185, 202, 204, 210, 220 (Item #: 178303, Ref: 1753007M1) $55.00

Bucket Style Base Cushion - Approx 19 inches wide x 15 inches deep x 5 inches thick. Has strap to secure bottom. For models: MH50, TE20, TO20, TO30, TO35, F40, 30, 35, 50, 65, 85, 88, 95, 130, 135, 165, 185, 230, 235. This seat cushion is GREY grained vinyl. (Item #: 101317, Ref: R1000) $52.00

Bucket Style Seat and Backrest - Grey seat covered cushions, back and bottom with inlay as pictured. Contains part R1000 and R1001. For tractor models MH50, TE20, TO20, TO30, TO35, F40, 30, 35, 50, 65, 85, 88, 95, 130, 135, 165, 185, 230, 235. This kit contains: backrest assembly (part number 181324M1 inlay and 513353M91 cover), seat cushion assembly (part number 181326M1 inlay and 513351M91 cover). (Item #: 133469, Ref: FCX810) $96.00

Bucket Style Seat Back - Curved seat back measures approximately 16 inches wide x 4-1/2 inches tall x 2 inches deep. Has 2 mounting studs (on back) spaced approximately 9-1/4 inches apart. For tractor models MH50, TE20, TO20, TO30, TO35, F40, 30, 35, 50, 65, 85, 88, 95, 130, 135, 165, 185, 230, 235. This seat back is GREY grained vinyl. (Item #: 101318, Ref: R1001) $42.60

Seat Cushion - New Black Canvas Seat Fits Massey Ferguson 35, 20, 202, 203, 204, 205, 30, 40, F40, TE20, TO20, TO30, TO35, 130, 135, 150, 185, 230, 235, 250, 283, 50, 65, 85, 88, 95 Models Interchangeable with 1690046M91-1, 1753008M1 (Item #: 183821, Ref: 1753008M1) $74.00

Sheet Metal / Body Parts

Battery Panel - For 165, 175, 185. Battery Panel replaces 1884366M91. (Item #: 155791, Ref: 1862896M91) $34.90

No
Picture
Grille Retainer Screw - For Massey Ferguson tractor models 20, 30, 31, 133, 135, 148, 158, 165, 168, 175, 178, 185, 188, 1080, 2135, 3165, Replaces Massey Ferguson OEM number 897819M1, Total Length: 29.5 mm, Useable Length: 22 mm, Shaft: 11 mm, (Item #: 172987) $7.20

Light Cowl, LH - For tractor models 135, 148, 165, 168, 175, 178, 185, 188. (Item #: 173123, Ref: 1860184M1) $11.00

Light Cowl, RH - For tractor models 135, 148, 165, 168, 175, 178, 185, 188. (Item #: 173122, Ref: 1860183M1) $11.30

Lower Panel - For Massey Ferguson tractor models 165, 168, 175, 178, 185, 188, Replaces Massey Ferguson OEM number 1886316M1, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 155790) $19.00

Steering

Bearing, Thrust Spindle - Bearing, Thrust Spindle. 1 1/2 Inch Inside Diameter, 2 19/32 Outside Diameter, 5/8 inch Wide. Replaces 1860036M3, 1868732M1, 196167M1, 3611413M1, 3599263M1 (Item #: 102474, Ref: 196167M1) $10.80

Bushing, Steering Arm - Bushing, main steering arm assembly or power steering cylinder support. Tractors: MF50, MF65, MF135, MF150, MF165, MF175, MF255, MF265, MF270, MF275, MF282, MF285, MF290, MF670, MF690. Industrials: 30, 31, 50F, 50H, 302, 304. Measures 3/4 inch inside diameter, 7/8 inch outside diameter, 1-1/4 inch length. Replaces VPJ5244, 190560M1 (Item #: 128534, Ref: 190560M1) $8.40

Castle Nut - Used as a steering arm nut and a spindle nut in different applications. It is 1 1/4 inch UNF thread. Replaces OEM part numbers: 353931X1, 882263M1, 882263V1, 882263M91 (Item #: 168996, Ref: 353931X1) $5.40

Front Axle Support - For tractor models 168, 175, 178, 185, 188, 270, 298, 392S, 670, 698, 699, (265, 285, 290, 690 all heavy duty), (275, 283 UK models).Replaces 1684290M1, 1684301M91, 1870287M95 (Item #: 160632, Ref: 1684301M91) $708.00

Jam Nut - For tractor models 1100, 1105, 1130, 1135, 1150, 1155, 150, 165, 168, 175, 185, 188, 245, 255, 265, 275, 285, 290, 30, 31, (50 serial number 533423 and up), (65 serial number 692932 and up). (Item #: 105123, Ref: 192928M1) $8.40

Jam Nut - For the following tractors: 20C, 1080, 1085, 180, 185, 230, 245. Replaces 1028269M1. (Item #: 105123, Ref: 192928M1) $8.40

Jam Nut - For Massey Ferguson tractor models 180, 185, 1080, 1085, Replaces Massey Ferguson OEM number 1028269M1, (Item #: 105152) $8.60

Linkage Repair Kit - Kit contains: 1 x 881728M1 Link End LH, 881727M1 Turnbuckle, 881729M1 Link End RH, 183080M1 Clevis Pin, 1 x 1888905M1 Link Control Pin, 3 x 354041x1 Spilt Pins, 1 x 353430x1 Nut, 1 x 375108x1 Nut. Used on 165 UK, 168, 175 UK, 178 UK, 185, 188, 231, 240, 250, 265, 275, 282, 285 (FR), 290, 375E Brazilian, 390E Brazilian, 50, 50B. Verify part numbers before ordering. (Item #: 183824, Ref: S40143) $19.10

Outer Tie Rod - For Massey Ferguson tractor models 165, 168, 175, 185, 188, 255, 265, 275, 285, 290, Replaces Massey Ferguson OEM number 1028262M92, 1028262M91, 1028262M1, 1028262V91, Diameter: 0.75", Length: 15", (Item #: 166412) $24.90

Pivot Pin, Steering Cylinder - For tractor models 165 UK, 168, 175 UK, 178, 185, 188, 265, 275, 285, 290. Replaces 898363M1, 1671322M1. (Item #: 173113, Ref: 1471630M1) $8.90

Power Steering Pump Filter - This filter measures Overall height 64mm (2.5 inches), Outside Diameter 86mm (3.39 Inches), Inside Diameter 27mm (1.06 inches). It is used on some Massey Ferguson: 1080, 130, 165, 168, 175, 178, 180, 185, 188, 25, 30, 300, 302, 304, 3165, 3303, 50, 50A, 50B, 65. Replaces original part numbers 1883318M91, 1883318M1, 1883318M2, 1019235M91, 169743R91, CR447, 447, P551221, 37H1434 (Item #: 181652, Ref: 1883318M1) $8.10

Power Steering Pump Seal Kit - For tractor models 165, 168, 185, 188, 265, 270, 275, 282, 283, 290, 298, 362, 375, 383, 390, 565, 575, 590, 595, 670, 675, 690, 698, 698T, 30D, 50, 50E. Replaces part number 1635948M1. (Item #: 170118, Ref: 1635948M92) $18.70

Sector Shaft Oil Seal - Oil Seal, inner for Pitman Arm Sector Shaft. Used on 165UK, 168, 175UK, 178, 185, 188, 265S, 275UK, 282, 285S, 290UK. Measures 2.000 Inches Outside Diameter, 1.500 Inches Inside Diameter and 0.250 Inches Wide. Wide. Replaces 1850519M1, 1850519V1 (Item #: 161888, Ref: C5NN3C615B) $8.40

Sliding Rod Assembly - Tie rod end, outer left hand or right hand, slotted. 15.487 inches to center of post, .937 inch outside diameter. For adjustable front axle on tractors: 180, 185, 1080, 1085. For right hand only: 50, 65, 150, 165. (Item #: 102519, Ref: 1028265M92) $33.70

Spindle Bushing - 1.680 inch outside diameter, 1.50 inch inside diameter, 1.50 inches long. For tractor models 1080, 1085, 135, 165, 168, 175, 180, 185, 188, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 30, 302, 304, 30B, 30D, 30E, 3165, 360, 362, 392S, 40, 40B, 40E, 4500, 575, 590, 670, 675, 690, 765, 85, 88, 90. (Item #: 102482, Ref: 183086M1) $6.10

$Massey Ferguson 185 Spindle Bushing\Bearing\Seal Kit$
Spindle Bushing/Bearing/Seal Kit - Kit includes (2) 196167M1 thrust bearings, (4) 183086M1 bushings, and (2) seals. For tractor models 135, 165, 168, 178, 185, 188, 20C, 20D, 20F, 202, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 255, 265, 270, 275, 282, 285, 30, 30B, 30D, 30E, 30H, 3165, 356, 392S, 40, 40B, 40E, 4500, 575, 590, 670, 675, 690, 765, 290HD, MH50 (Item #: 104972, Ref: 196165M1) $30.70

No
Picture
Spindle - Right Hand/Left Hand - For Massey Ferguson tractor models 165, 175, 180, 185, 255, 265, 275, 285 (heavy-duty clearance), 1080, 1085, Replaces Massey Ferguson OEM number 553312, Dimension A: 14.875", Dimension B: 1.500", Dimension C: 1.796", Dimension D: 1.250", Left or Right Side, Front wheel bearing kit use Item #: 104974, Additional Handling and Oversize Fees Apply To This Item, (Item #: 102484) $177.00

$Massey Ferguson 185 Spindle - Right Hand\Left Hand$
Spindle - Right Hand/Left Hand - For Massey Ferguson tractor models 165, 175, 180, 185, 255, 265, 275, 285 (Heavy Duty Hi-Clearance), 1080, 1085, Replaces Massey Ferguson OEM number 553311, Dimension A: 15.875", Dimension B: 1.500", Dimension C: 1.796", Dimension D: 1.250", Right or Left Side, (Item #: 105020) $217.00

Spindle Thrust Washer - This Thrust Washer is used with 532480M92 and 508571M92 on Massey Ferguson 30, 3165, 1080, 1085, 165, 175, 180, 185, 255, 265, 275, 282, 285. 1-9/16 X 2-1/4 X 1/4 inches. Replaces 513800M1 (Item #: 104974, Ref: 513800M1) $12.20

Steering Arm - For tractor models 168, 178, 185, 188, 265, 285, 290, 392S, (165, 175, 275 all UK). (Item #: 105205, Ref: 898354M1) $33.60

Steering Arm - 42 spline. For tractor models 168, 178, 185, 188, 265, 270, 282, 283, 285, 290, 565, 575, 670, 675, 690, (165, 175, 275 all UK models). (Item #: 105207, Ref: 898355M91) $64.30

Steering Arm - Lower - For Massey Ferguson tractor models 165, 168, 175, 178, 185, 188, 265S, 275 (UK), 282, 283, 285, 290, 565, 575, 590, 670, 675, Compatible with Massey Ferguson Construction and industrial models 50E, 50H, Replaces Massey Ferguson OEM number 1676664M91, 1876391M92, 897923M2, For upper steering arm use use Item #: 105207, (Item #: 102533) $65.00

Steering Arm, Power Steering - 42 spline. For tractor models 282, 275 UK, 290 UK, 165, 168, 175, 178, 185, 188, 265, 285. (Item #: 105208, Ref: 1671335M1) $20.90

Steering Box Guide Assembly - Used inside 1853104M91 shaft assembly. It us used on Massey Ferguson 165UK, 168, 175UK, 178, 185, 188, 265UK, 275UK, 285 French built, 290, 375E Brazilian, 390E Brazilian. (Item #: 179679, Ref: 1805744M91) $43.10

Steering Column Gasket - Used on Used on 165UK, 168, 175UK, 178, 185, 188, 265S, 275UK, 282, 285S, 290UK, this gasket sits between the upper tube and the steering gear case. (Item #: 179660, Ref: 1853121M1) $0.60

Steering Column Inner Bushing - Used on Massey Ferguson 165, 168, 175, 178, 185, 188, 265, 275, 282, 285 (FR), 290, 375E Brazilian, 390E Brazilian, this bearing has a 7/8 inch inside diameter. It replaces Massey Ferguson part numbers 1853112M1, 1853112V1 (Item #: 178029, Ref: 407508A) $8.00

Steering Sector Shaft Bushing - Replacing OEM number 1850018M1, 21910014, this bushing has an inside diameter of 1.252 inches and an outside diameter of 1.382 inches. Used on Massey Ferguson 135, 145, 148, 155, 158, 165, 168, 175, 178, 185, 188, 20B, 20D, 20E, 230, 231, 235, 240, 245, 250, 30E, 35, 35X, FE35, 40, 65, 765. (Item #: 168937, Ref: 1850018M1) $10.40

Steering Sector Shaft Bushing - Used on Massey Ferguson models: 165, 168, 175, 178, 185, 188, 265, 275, 282, 285 (FR), 290, 375E Brazilian, 390E Brazilian, 50, 65. This bushing measures 1.500 inches inside diameter, 1.630 inches outside diameter, and is 1.780 inches long. Verify measurements or part number before ordering. Most of the listed tractors used more than one size. Replaces OEM numbers 1850517V1, 1850517M1 (Item #: 173342, Ref: 1850517M1) $9.50

Steering Shaft - Used on Massey Ferguson 165UK serial number 100001 and up, 168 Late Production, 185UK, 188UK, 265UK up to serial number 181259, 275UK up to serial number 211774, 285UK early version, 290UK up to serial number 344187. This part replaces 1853104M91, 1805743M92, 1805743M91, 1687019M92 (Item #: 182614, Ref: 1853104M91) $148.00

Steering Shaft Bearing - Measuring 1.177 inches inside diameter, 2.189 inches outside diameter, and 0.591 inches wide, this bearing is used at the top and bottom of the steering shaft. Used on Massey Ferguson 165UK, 168, 175UK, 178, 185, 188, 265S, 275UK, 282, 285S, 290UK. This bearing replaces OEM numbers 1883133M91, 1883133V91 (Item #: 151015, Ref: 1883133M91) $14.10

No
Picture
Steering Shaft Dust Cover - For Massey Ferguson tractor models 165, 168, 175, 178, 185, 188, 253, 263, 265, 275, 282, 285, 290, Replaces Massey Ferguson OEM number 1863359M1, (Item #: 173685) $3.10

Steering Shaft, Manual Steering - 1.870 inch diameter, 11.375 inches long. For tractor models 165 UK, 168, 175 UK, 178, 185, 188, 265S, 270, 275 UK, 283, 290, 392S, 50E, 50H, 565, 575, 590, 670, 675, 690. Replaces 898023M2. (Item #: 105214, Ref: 1676666M1) $80.41

Steering Tube Bushing - Used on 165UK, 168, 175UK, 178, 185, 188, 265S, 275UK, 282, 285S, 290UK, this bushing sits at the top of the steering column tube. (Item #: 173712, Ref: 1853210M1) $7.10

Steering Wheel - 36 splined center. For tractor models 165, 168, 175, 185, 188, 265, 285, 290, (565 up to serial number 6585483), (575 up to serial number 270719), (590 up to serial number 380795). Replaces original part numbers 1671945M1, 508460M2, 525681M2, 772868M1, 894737M1. (Item #: 152003, Ref: 1671945M1) $42.00

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $8.00

Tie Rod Assembly - Inner Tie Rod Assembly for Models 165, 168, 175, 185, 188, 255, 265, 270, 275, 282, 283, 290, 565, 575, 590, 675, 690. (Item #: 105115, Ref: 886797M91) $42.10

Tie Rod Assembly - Left Hand - For Massey Ferguson tractor models 165, 168, 175, 175 (s/n 724937 - later), 178 (s/n 724937 - later), 185, 255, 265, 270, 275, 282, 283, 290, 565, 590, 675, 690, Replaces Massey Ferguson OEM number 553323, Fits Left Hand Side, (Item #: 105113) $81.00

Tie Rod Assembly, LH - For tractor models 165, 168, 175, 185, 188, 255, 265, 275, 285, 290, (30, 31 Industrials). (Item #: 105121, Ref: 553325) $77.00

Tie Rod Assembly - Right Hand - For Massey Ferguson tractor models 165, 168, 175 (s/n 72493-later), 185, 188, 255, 265, 270, 275, 282, 283, 290, 565, 575, 590, 675, 690, Replaces Massey Ferguson OEM number 553324, 881736M92, 886801M91, 886802M91, Fits Right Hand Side, (Item #: 105116) $95.00

$Massey Ferguson 185 Tie Rod Assembly - Right Hand\Left Hand$
Tie Rod Assembly - Right Hand/Left Hand - For Massey Ferguson tractor models 180, 185, 1080, 1085, Replaces Massey Ferguson OEM number 553320, Fits Right Hand or Left Hand Side, (Item #: 105150) $112.00

Tie Rod End - Inner, Right Hand, measures 4 inches from center of knuckle to end of threads and is .812 inch diameter right hand threads. For tractor models 165, 168, 175, 185, 188, 255, 265, 270, 275, 282, 283, 290, 565, 575, 590, 675, 690. (Item #: 102512, Ref: 886802M91) $17.40

Tie Rod with Tube - Right Hand - For Massey Ferguson tractor models 65, 165, 165 (UK), 168, 175 (s/n 724937-later), 175 (UK), 178 (s/n 724937-later), 178 (UK), 185, 188, 265, 275, 282, 285 (France), 290, 375 (E, Brazil), 390 (E, Brazil), 565, 575, 590, 675, 680, Replaces Massey Ferguson OEM number 1810366M91, 881741M92, 898053M91, 1810336M91, 17.750" Long, 1.032" I.D., Fits Right Hand Side, For tie rod end to complete assembly use Item #: 105114, (Item #: 105118) $51.00

No
Picture
Trunion Pin Support Shim - For Massey Ferguson tractor models 168, 185, 188, 243, 253, 261, 263, 265S, 285S, 290, 340, 342, 350, 355, 360, 362, 365, 372, 375, 383, 390, 390T, 393, 396, 398, 399, 430, 431, 451, 461, 471, 481, 491, 492, 543, 565, 575, 590, 675, 690, 698, 4215, 4220, 4225, 4235, 4240, 4245, 4255, 4315, 4320, 4325, 4335, 4345, 4355, Compatible with Massey Ferguson Construction and industrial models 50B, 3165, Replaces Massey Ferguson OEM number 505238M1, 898018M1, 0.28" wide, (Item #: 174120) $1.50

No
Picture
Trunion Pin Support Shim - For Massey Ferguson tractor models 168, 185, 188, 243, 253, 261, 263, 265S, 285S, 290, 340, 342, 350, 355, 360, 362, 365, 372, 375, 383, 390, 390T, 393, 396, 398, 399, 430, 431, 451, 461, 471, 481, 491, 492, 543, 565, 575, 590, 675, 690, 698, 4215, 4220, 4225, 4235, 4240, 4245, 4255, 4315, 4320, 4325, 4335, 4345, 4355, Compatible with Massey Ferguson Construction and industrial models 50B, 3165, Replaces Massey Ferguson OEM number 505240M1, 898019M1, Size: 1-29/32" x 2-5/8", Thickness: 0.034", (Item #: 174124) $2.47

Wheels

Bolt and Nut Kit - Rear Rim to Wheel Center - Kit contains (1) 2.88 inch x 5/8 inch UNF bolt (bolts have a small key at end) with (1) nut. For the following models: 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 1200, 122, 1250, 130, 133, 135, 140, 145, 148, 1500, 1505, 152, 155, 158, 165, 168, 175, 178, 1800, 1805, 185, 188, 230, 235, 240, 245, 25, 250, 255, 260, 2620, 2625, 2640, 265, 265 S (TR), 2680, 2720, 2725, 275, 285 (FR), 285 S (TR), 290, 298, 35, 35 Gas / 35 Petrol, 35X, 3610, 3630, 3650, 500, 550, 560, 565, 575, 590, 592, 595, 65, 675, 690, 698, 765, 825, 835. Replaces 828217V1, 180876M1, 82817M1, 353615X1, 353427X1, 353 427X1. (Item #: 182520, Ref: S.04352) $3.00

Cap - Hub Cap, front wheel, threaded outside 2-3/4 inch, with grease fitting. For front hubs with threaded recess. For tractors: MF250 with split rim 6.00 x 10, MF253 with 179MM high axle, MF270, MF282, MF283 except Brazil, MF290, MF360, MF375, MF383, MF390, MF398, MF399, MF670, MF690. Industrials: 20D fixed axle, 30E, 40E. For 1134, 1143, 1144, 1153, 1163, 1164, 1183. Replaces 882637M1, 882636M91 (Item #: 104975, Ref: 882637M1WF) $9.70

Disc-Wheel Center (28 inch) - This disc is used on multiple, Ferguson, Massey Harris and Massey Ferguson Models. Check measurements before ordering. Disc, rear wheel 28 inch and 32 inch, 8-bolt hub, 6-bolt rim. Center hole: 4-5/16 inches, hub pattern: 8 lug - 6 inch bolt pattern. Replaces original part number numbers 193701M1, 772861M1, 1678566M1, 1882977M1, 963613M1. Additional $35 shipping due to weight. (Item #: 149804, Ref: D9NN1036CA) $195.00

Dual Wheel Adapter - Used to double up rear rims and tires, this adapter has male and female 5/8 inch UNF threads. Verify threads before ordering. Replaces 1863857M1, 1863857V1, 184876M1 (Item #: 173352, Ref: 1863857M1) $6.00

Front Hub Seal - Measuring 1.8720 inches inside diameter, 2.6840 inches outside diameter and 0.544 inches wide, this front hub seal is used on Massey Ferguson models: 135, 150, 165, 175, 180, 185, 205, 230, 235, 245, 255, 265, 285, 1080, 1085, 20C. Replaces OEM numbers VPJ2807, 18265, 833342M1, 897242M1, 1204-4915 (Item #: 111672, Ref: 833342M1) $6.50

Hub Cap - Threaded. Used with 532781M92 Front Wheel Hub. For tractor models 1080, 1085, 165, 175, 180, 185, 255, 265, 275, 285, 2200. 2 1/2 inch diameter on threaded end. (Item #: 104977, Ref: 191495M1) $7.40

$Massey Ferguson 185 Rear Rim Bolt - 5\8 inch x 2-7\8 inch$
Rear Rim Bolt - 5/8" x 2-7/8" - For Massey Ferguson tractor models 35, 65, 130, 135, 148, 165, 168, 175, 178, 185, 188, 230, 240, 250, 360, 2640, 3630, 3650, Compatible with Massey Ferguson Combine (s) 550, Compatible with Massey Ferguson Construction and industrial models 20D, 20F, 30E, 40E, 50E, 765, Replaces Massey Ferguson OEM number 828217M1, 180876M1, 703929R1, K611261, (Item #: 113970) $3.00

Spindle Tab Washer - This Tab Washer is used on Massey Ferguson FE35, TEA20, TED20, TEF20, TO20, TO30, TO35, 130, 135, 148, 150, 165, 168, 175, 178, 180, 185, 20, 20B, 20C, 20D, 20E, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 275, 30, 3165, 340, 342, 35, 350, 35X, 360, 375E, 40, 550, 565, 65, 765. Measures 1.50 inches (38.20mm) outside diameter, .775 inch (19.70mm) inside diameter, 0.0625 (1.23mm) inch thick. It replaces original part numbers 957E1195, 81802388, 83910701, 898349M2, 180010M1, 180010M2 (Item #: 173191, Ref: 957E1195) $1.50

Wheel Bearing Kit - This front wheel bearing kit Includes 1 each: LM48548 (Cone), LM48510 (Cup), LM11949 (Cone), LM11910 (Cup), 18265 (Seal). For tractor models 1080, 1085, 135, 150, 165, 175, 180, 185, 202, 203, 204, 205, 20C, 230, 235, 245, 255, 265, 275, 285. Replaces 835965M91. (Item #: 102487, Ref: WBKMF2) $21.38

No
Picture
Wheel Bearing Kit - Kit contains 1 each of the following 25590 bearing, 25520 bearing cup, LM67048 bearing, LM67010 bearing cup, 22322 seal (lip type). For tractor models 1080, 165, 175, 180, 185, (202 serial number up to 306677), (203 serial number 65900300), (204 serial number up to 342537), (205 up to serial number 659100150), (2135 up to serial number 646992326), 255, 265, 275, 285, 40. (Item #: 102488, Ref: WBKMF3) $36.90

Wheel Bolt - This wheel bolt fits the following Massey Ferguson tractor models using the 532781M92 and 519278M91 hubs: 135, 165, 175, 180, 185, 230, 235, 245, 255, 265, 275, 285, 1080, 1085, 20, 20C, and 30. It has an overall length of 1 15/16 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1.5 inches. It has an overall length of 1.81 inches, a thread size of 9/16 inch 18 UNF, and thread length of 1.12 inches. Head size is 7/8. Replaces part numbers: 15597A, 518611M91, 519278M91 and MP1584. (Item #: 108605, Ref: WB916) $2.20

Wheel Hub - For tractor models 1080, 1085, 165, 175, 180, 185, 255, 265, 275, 285. Uses WBKMF3 wheel bearing kit. (Item #: 104978, Ref: 532781M92) $78.00

$Massey Ferguson 185 Wheel Nut, 5\8 inch NF Special$
Wheel Nut, 5/8" NF Special - For Massey Ferguson tractor models 150, 165, 168, 175, 178, 180, 185, 188, 240, 250, 255, 265, 270, 271, 275, 282, 285, 290, 565, 575, Compatible with Massey Ferguson Construction and industrial models 30, 50C, 50D, 3165, Replaces Massey Ferguson OEM number 645735M2, 881162M1, 881162M2, 5/8" NF Special, Use With Bolt 108655, (Item #: 108654) $1.90

Wheel Rim, Rim Size: 10 x 28 - The Assembly Contains a 10 x 28 Rim, the center disc and hardware. Comes assembled. Suitable for Tire size: 12.4 x 28, Alternative Tire size: 11.2 x 28. The rim measures 10 Inches from bead to bead where the tire rests. Center hole: 4-5/16 inches, hub pattern: 8 lug - 6 inch bolt pattern. Verify all measurements before ordering. Replaces 193701M1, 772861M1, 1678566M1, 1882977M1, 963613M1, 180863M91, 764994M91. Additional $35 shipping due to weight. (Item #: 178951, Ref: S61968) $657.00

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $385.00

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $97.00

Decals and Emblems

Ferguson Script Decal - 12 inches long, vinyl, blue and white. (Item #: 183045, Ref: R0735) $14.20

Ferguson Script Decal - 19 inches long, vinyl, green and chrome. (Item #: 178283, Ref: R0736) $25.80

Ferguson Script Decal - 26 inches long, vinyl, blue white. (Item #: 183046, Ref: R0737) $36.60

Massey Harris Trademark Decal - Red with yellow letters, 1-1/2 inches on vinyl. (Item #: 183092, Ref: R5190) $3.90

Massey Harris Trademark Decal - Yellow with red letters, 1-1/2 inches on vinyl. (Item #: 183072, Ref: R5191) $3.90

Massey Harris Trademark Decal - Red with yellow letters, 6 inches on vinyl. (Item #: 183101, Ref: R5192) $12.40

Massey Harris Trademark Decal - Yellow with red letters, 3/4 inch on vinyl. (Item #: 183066, Ref: R5236) $2.60

Massey Harris Trademark Decal - Red with yellow letters, 3/4 inch on vinyl. (Item #: 183098, Ref: R5237) $2.60

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $14.40

Alternator Pulley - Pulley, 3-1/8 inch diameter, 5/8 inch shaft bore, 2 grooves for 1/2 inch wide V-belt. (Item #: 179552, Ref: AP3158) $97.00

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Item #: BTW28) $35.98

No
Picture
Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Item #: BTW72) $53.81

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $49.20

Generator Cutout - Generator cutout for Autolite, 6-volt. For most MH models to 1951. (Item #: 105283, Ref: CB4014) $22.60

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $4.80

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Can fit several applications please verify OEM part before ordering. (Item #: 182636, Ref: 1871662) $93.58

Starter Drive - Drive assembly for Delco starters. Fits all MF diesel models Perkins gas models. (Item #: 111105, Ref: 1036519M91) $28.30

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $16.80

Starter Solenoid - Solenoid assembly, saddle mounting to starter. Services most late models, replaces Delco 1115510, on starters 1113139, 1113683, 1113676, others. 12-volt. (Item #: 105672, Ref: 1115510) $30.00

$Massey Ferguson 185 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $16.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.90

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $81.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $108.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $161.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $145.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Massey Ferguson 185 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $2.10

$Massey Ferguson 185 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Massey Ferguson 185 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.90

$Massey Ferguson 185 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $5.30

$Massey Ferguson 185 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.40

$Massey Ferguson 185 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.00

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.30

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $12.70

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $11.00

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $8.80

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $12.50

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.00

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $12.90

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.40

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $17.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.50

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $8.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $14.00

Carburetor Float, Zenith - This Float is used in the following Zenith Carburetors: 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993 (Item #: 108454, Ref: C85-103-S) $17.00

Fuel Line Sleeve, Pack of 10 - 7/16 inch outside diameter x 1/4 inch inside diameter x 1/4 inches wide. Replaces 33811113, 3637441M91, 376525X1, 3638466M91 (Item #: 158879, Ref: 376525X1) $4.10

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.92

$Massey Ferguson 185 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.30

Throttle Linkage - Universal. Adjustable length ranges from 6 3/8 to 6 5/8. Rod can be cut and either re-bent or re-threaded if a shorter length is required. (Item #: 173108, Ref: 1876343M92) $14.60

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $63.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $42.30

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Bracket Stabilizer - Bracket, used with telescoping stabilizer 539881M2TSK. (Item #: 178304, Ref: 514992M2) $46.00

Drawbar - Drawbar, category I, 7/8 inch pins. 11 holes, 26 inch bar length. (Item #: 103174, Ref: 180485M1) $42.10

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.40

No
Picture
Level Box Assembly - Leveling Box Assembly, standard right hand, category I, 20-1/2" closed, 26" open. Contains fork, shaft, pinion (185220M1-10-1/2"), housing, gear, bearing, handle and hardware. Replaces 677061, 1884760M94. Services all catergory I standard models. (Item #: 110256, Ref: HLBMF61) $70.00

Top Link Assembly, OEM Style - Category 1-1, 17-1/4 inch length of center tube. Verify size before ordering. Replaces 1870075M9. (Item #: 182641, Ref: 184134M91) $90.00

Top Link Assembly, OEM Style - Category 1-1, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 184078M91, 1869954M91. (Item #: 182642, Ref: 1690177M91) $68.00

Top Link Assembly, OEM Style - Category 1-1, 21-1/2 inch length of center tube. Verify size before ordering. (Item #: 182643, Ref: 184361M91) $89.00

Top Link Assembly, OEM Style - Category 1-2, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 3597172M91, 894376M1, 894376M91. (Item #: 182645, Ref: 194376M91) $90.30

Top Link Assembly, OEM Style - Category 1-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 894377M91, 894 377M91, 894377M1 (Item #: 170303, Ref: 894377M1) $90.00

Top Link Assembly, OEM Style - Category 2-2, 18-3/4 inch Length of center tube. (Item #: 182650, Ref: 893438M91) $81.00

Top Link Assembly, OEM Style - Category 2-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 3147681M91, 893439M91. (Item #: 184676, Ref: 1887285M91) $60.00

Top Link, Cat I and Cat II - Top link, 16 inch body combination Category II tractor and Category I implement ends, Adjust 19-1/2 inches to 29-1/2 inches overall. May or may NOT come painted red. (Item #: 112122, Ref: JSA1200R) $29.20

Top Link, Cat II - Top link, 24 inch body, 1 inch Category II ball joints. Adjusts 29 inches to 41 inches. Color varies depending on availability. (Item #: 182649, Ref: JSA2024R) $89.00

Top Link, Cat II, Red - Top link, 20 inch body, 1 inch category II ball joints. Adjusts 25 inches to 37 inches. (Item #: 184552, Ref: 30108E91) $77.00

Top Link, Cat I, Red - Top link, 24 inch body, 3/4 inch category I ball joints. Adjusts 29 inches to 39 inches overall. Painted red. (Item #: 182651, Ref: JSA1024R) $76.00

Top Link, Hydraulic - Category I (3/4 inch), 18.5" inches to 26.0 inches length, 2.00 inch cylinder bore, 9/16 inch UNF port size. (Item #: 183653, Ref: B8106) $257.00

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Clamp, Double Break-Away, Hydraulic - For use with S20-4 and S40-4 Couplers. Quik-Cover Assembly HV4957 fits this Clamp. (Item #: 112480, Ref: S42-4) $24.60

Coupler Flange - Optional drive flange for L601-9; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch spacing. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b. (Item #: 108772, Ref: L36-6) $64.00

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.40

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.10

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $21.10

Hydraulic Selector, isolator assembly - For tractors without individual external hydraulic systems. Three position spool, forward position allows one-way (push) for single acting cylinder. Center position allows operation of the 3-point arms and the rear position will feed power to a 4 way control valve for two way (push-pull) operation of double acting cylinder. Fits all MF tractors where 182373M1 lift cover is used. Replace MF cover plate, adds 2 I/O ports 3/8 inch NPT. (Item #: 185644, Ref: TS300) $140.00

Hydraulic Valve Kit, External, Single Spool - Converts tractor for operation of cylinders on pull type implements, front loaders, hydraulic motors, or other optional hydraulics. Single spool, double acting control valve mounts conveniently on flat or shell fenders. Selector/isolator allows operation of single or double acting cylinders. Mounting hardware and instructions included. Kit contains single spool, double acting control valve, isolator valve, valve couplers, clamp hoses, adaptors, hardware and instructions. For tractor models TO35 and later where 182373M1 lift cover plate is accessible. (Item #: 178324, Ref: TS3200M) $872.00

Hydraulic Valve Manifold - This 3 Spool Valve allows operator to use auxiliary hydraulics at the same time without valve switching. Some tractors may need slight modification on seat. Includes 2 elbows. Models from 1960 and later years. (Item #: 173361, Ref: 19833A92) $1159.01

LBP Coupler Center - This LBP Coupler Center Member measures (A) 3-5/8 inch diameter (B) four 5/16 inch holes, 2-1/4 inch spacing. Replaces 1753729M91. (Item #: 178931, Ref: 192169) $75.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.50

No
Picture
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.91

Valve - Valve for TS3200M. Single spool, 4-way, 3-position, spring loaded to neutral. No relief valve, no power beyond option. In and out ports 3/4 inch, work ports 1/2 inch NPT. (Item #: 183771, Ref: TS200BA) $303.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $14.90

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.90

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Item #: 169771, Ref: 170BH) $7.86

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $132.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.10

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.30

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $51.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $78.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.10

Lights

Headlight Kit, 12 Volt, LH, Chrome Ring - Kit contains 6" steel body, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 186851, Ref: S.43374) $102.00

Headlight Kit, 12 Volt, RH, Chrome Ring - Headlight Kit contains 6" steel, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 187205, Ref: S.22341) $106.00

Headlight Kit, 6 Volt, LH - Headlight assembly includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (LH), Primered. Assembly required. (Item #: S.43370) $98.00

Headlight Kit, 6 Volt, RH - Includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (RH), Primered. Assembly required. (Item #: S.22342) $101.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Item #: L200MAGH) $75.13

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Item #: 173803, Ref: L408-12V) $38.40

Miscellaneous

Air Cond Comp - New Air conditioning compressor, replacement for Frigidaire A-6 compressor. Includes 5.58" dia. clutch and dust cover, high pressure relief valve. With 12V coil at 10 Oclock, SAE thread. Less superheat switch (comes plugged with non-functional heat switch. For tractors that have air conditioning systems using the Frigidaire A-6 compressor already. (Item #: 109093, Ref: 1904014M92) $430.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Hand Cleaner, Gallon - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Item #: 180453, Ref: PRM25218) $24.60

Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $123.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.50

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $65.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.00

No
Picture
Paint, Dark Gray, 1 Gallon - This Dark Gray was used on Ferguson Implements from 1939 through 1948. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Fords (1939-1947). Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108333, Ref: TP2888GAL) $57.00

No
Picture
Paint, French Silver Mist Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108364, Ref: TP750GAL) $71.00

No
Picture
Paint, French Silver Mist Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108363, Ref: TP750QT) $27.00

No
Picture
Paint, French Silver Mist Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108362, Ref: TP750SP) $11.40

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $24.00

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.30

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184671, Ref: TP540GAL) $150.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP540QT) $61.00

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108367, Ref: TP235GAL) $90.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108366, Ref: TP235QT) $35.00

No
Picture
Paint, Light Gray, Spray Can - TO35 Sheet Metal 1954-56 and implements after 1954. From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108365, Ref: TP235SP) $11.00

No
Picture
Paint, MF Red, 1 Gallon - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102660, Ref: TP300GAL) $53.00

No
Picture
Paint, MF Red, 1 Quart - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102659, Ref: TP300QT) $22.10

No
Picture
Paint, MF Red, Spray Can - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102658, Ref: TP300SP) $7.70

No
Picture
Paint, MH Red, 1 Gallon - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108370, Ref: TP340GAL) $56.00

No
Picture
Paint, MH Red, 1 Quart - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108369, Ref: TP340QT) $24.00

No
Picture
Paint, MH Red, Spray Can - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108368, Ref: TP340SP) $10.20

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $59.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $24.00

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $24.00

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $8.50

No
Picture
Paint, Straw Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108373, Ref: TP345GAL) $138.00

No
Picture
Paint, Straw Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP345QT) $61.00

No
Picture
Paint, StrawYellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108371, Ref: TP345SP) $10.90

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $40.00

PTO / Driveline

Coupler Repair Kit - Coupler repair kit, services all Hub City over-running couplers. Contains keys, roll pin, set screw, springs, spacer, and retaining ring. (Item #: 182663, Ref: CRK600) $91.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $174.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Quick Release Pin - PTO quick release pin fits MOST American yokes. Replaces: 1810351M91, QDK1, QDK1M. (Item #: 112246, Ref: 1810351M91) $5.40

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $268.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

No
Picture
Seat Cover (Red and Yellow) - Tie-on for 19 inch wide pan seat. For Tractors that have a Red and Yellow color scheme. (Item #: XYFR30RY) $31.50

Tie-On Seat Cover - Grey, 19 inches wide. Deluxe with 2 inches of foam. This fits a PAN seat. (Item #: 178997, Ref: R2600) $56.00

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Bumper - Bumper assembly, mounting arms NOT included. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 178311, Ref: BU10211R) $134.00

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 1008553M1, 1052262M91 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $23.10

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $287.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 183027M91, 509893M91 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $78.00

Rim 10X28 - This rim measures 10 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. May come Painted primer or aluminum or off white color. Replaces 180863M91. (Item #: 103719, Ref: NCA1020B) $132.00

Rim 11X28 with 6 Loop Clamps - This rim is 11 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. Painted aluminum color. Shipped via truck Add $25.00 extra shipping per rim due to weight. Replaces 535450M91. (Item #: 104209, Ref: C5NN1050E) $147.00

Rim, 12X24 - Rim, 12 x 24 demountable rim for 13 x 24 or 14 x 24 tires. Add $52.95 extra shipping due to weight. 6 Loops, these measure 20 1/4 inches center-to-center across from one another. Uses special S.04352 bolt and nut kit. (Item #: 108579, Ref: 535454M91) $140.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $19.10

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $57.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $111.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $67.00

No
Picture
Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube. Not for use with radial tires. (Item #: 183819, Ref: WHS064) $82.00