(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Drawbar for John Deere Tractors


Click here to see parts by model


Drawbar Pin
- This Drawbar Pin is used on John Deere 820, 920, 1020, 1120, 1520, 2020, 2120, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2440, 2640, 300B. It replaces AT19850 (Part No: AT19850)
$33.25

Drawbar Front Support
- This Front Drawbar Support fits multiple John Deere models. It will replace original part number T21672 if you also use L32016 Front Drawbar Pin and L31849 Front Drawbar Pin Adapter. It replaces original part number AL27203 (Part No: AL27203)
$54.03

Drawbar Front Support
- This Front Drawbar Support fits multiple John Deere models. It will replace original part number T21672 if you also use L32016 Front Drawbar Pin and L31849 Front Drawbar Pin Adapter. It replaces original part number AL27203 (Part No: AL27203)
$54.03

Drawbar Front Support Pin
- This Drawbar Front Support Pin fits multiple John Deere Models. It can replace AT19850 when you also replace AL27203 Support and L31849 Pin Adaptor. (Part No: L32016)
$12.89

Drawbar Front Support Pin
- This Drawbar Front Support Pin fits multiple John Deere Models. It can replace AT19850 when you also replace AL27203 Support and L31849 Pin Adaptor. (Part No: L32016)
$12.89

Drawbar Front Support Pin Adapter
- This Drawbar Front Support Pin Adapter fits multiple John Deere Models. It is used in conjunction with L32016 Pin and AL27203 Bracket to update older style front draw bar supports. (Part No: L31849)
$8.86

Drawbar Front Support Pin Adapter
- This Drawbar Front Support Pin Adapter fits multiple John Deere Models. It is used in conjunction with L32016 Pin and AL27203 Bracket to update older style front draw bar supports. (Part No: L31849)
$8.86

Swinging Drawbar
- For model A SN# 432497 to 561902. (Part No: AA956R)
$103.46

Swinging Drawbar
- For model B up to SN# 149699. (Part No: R4307)
$164.79

Drawbar, Offset
- 2.250 Offset 1.25 x 2.50 x 36.625 (.781 Holes at 1.125, 2.750, & 8.575 ) For 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 1640, 1641, 1830, 1840, 2020, 2030, 2040, 2130, 2140, 2141, 2240, 2250, 2251, 2350, 2351, 2355, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2651, 2750, 2755, 2850, 2855, 820, 830. ADDITIONAL $15 SHIPPING DUE TO WEIGHT. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Drawbar pin available as part# L32016. (Part No: L29020)
$181.79

No
Picture
Drawbar
- Straight 1.250 x 2.50 x 36.750.781 Holes at 1.125, 2.750, & 8.578 For 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 2020, 2040, 2240, 2350, 2355, 2550, 2630, 2640, 2750, 2755, 2855 (Part No: R3092)
$170.79

Drawbar, Offset
- 2.50 Offset - Heavy Duty 1.250 x 2.50 x 44.750 (1.010 Holes at 1.060, 2.310, 4.360, 7.050, 9.050 & 12.30 inches). For 2510, 2520, 4000, 4010, 4020, 4030HD, Hi-Crop 3020, 4010 HD Hi-Crop, HD Row Crop with Std Wide Swing. (Part No: R81576)
$182.55

Drawbar, Offset
- 2.50 Offset. Size is 1.250 x 2.50 x 44.750 Bar has 1.010 Holes at 1.060 & 2.310 & 4.360 & 7.050 & 9.050 & 12.30 inches. For 2510 Hi-Crop, Row Crop Wide Swing, 2520 Hi-Crop, Row Crop Wide Swing, 3010 Row Crop, Std Wide Swing, 3020 Rop Crop, Orchard, 4000 Hi-Crop, 4010 Row Crop, 4010 Row Crop with Wide Swing, 4020 Hi-Crop, 4030 Row Crop. *An additional $10 shipping charge applies due to weight\size. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: RE20662)
$205.72

Drawbar, Offset
- Has 2.125 Offset. Size is 1.375 x 2.50 x 40.875 Has 1.016 Holes located at: 1.062, 2.687, 6.187, & 7.812 inches. For 2840, 2940, 2950, 2955, 3150. (Part No: T28014)
$227.72

No
Picture
Drawbar
- 2.50 Offset 1.375 x 2.50 x 49.250 1.010 Holes at 1.420, 3.790, 9.410, 11.220, & 15.60 For 2955 (From S#632322), 3055, 3155 (From S#632322), 3255 (Part No: R3096)
$284.64

No
Picture
Drawbar
- Straight 1.375 x 2.50 x 45 1.015 Holes at 1.375, 2.625, 4.687, 7.345, 9.325, & 12.590 For 4000, 4020, 4030, 4040, 4230, 4320, 4430 (Part No: R3097)
$235.86

No
Picture
Drawbar
- 2 Offset with Hammer Strap Holes 1.375 x 2.50 x 45 1.015 Holes at 1.375, 2.625, 4.687, 7.345, 9.325, & 12.590 For 4000, 4020, 4030, 4040, 4230, 4320, 4430 (Part No: R3098)
$195.20

No
Picture
Drawbar
- 2 Offset without Hammer Strap Holes 1.375 x 2.50 x 45 1.015 Holes at 1.375, 2.625, 4.687, 7.345, 9.325, & 12.590 For 4000, 4020, 4030, 4040, 4230, 4320, 4430 (Part No: R3099)
$227.72

No
Picture
Drawbar
- 2 Offset 1.50 x 3 x 45.625 1.031 Holes at 1.656, 2.963, 5.532, & 8.581 For tractor models 4050, 4050 Hi-Crop, 4055 with Cat II, 4240, 4250, 4250 Hi-Crop, 4255 with Cat III, 4440, 4450 with Wide Swing. (Part No: R3100)
$300.92

No
Picture
Drawbar
- 1.750 Offset 1.750 x 3 x 63.375 1.312 Holes at 1.812 & 4.312. For tractor models 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960. (Part No: R3101)
$406.65

Drawbar
- For model 50. Drawbar is 29.375 inches in length, 2 inches wide, 1 inch thick, off-set. Used in 49A34R & 49A35. Replaces 49B70R (Part No: C0NN805F)
$44.61

Drawbar Pin, Front
- For tractor models 2510, 2520, 3020, 4000, 4010, 4020, 4030. All Hi-crop or Row-crop models. (Part No: AR27599)
$27.06

Drawbar Hammer Strap
- .75 thick. For tractor models 1020, 1250, 1450, 1530, 1650, 2010, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2855N, 5105, 5200, 5205, 5210, 5220, 5300, 5310, 5320, 5320N, 5400, 5410, 5420, 5420N, 5500, 5510, 5520, 5520N, 820, 830. (Part No: T29899)
$51.87

Drawbar Pivot Pin
- For tractor models 320, (A from SN# 561903 and above), (B from SN# 186134 and above), 50, 520, 530, 60, (620 up to SN# 13099), 40, 330, 420, 430, (M, MT with swinging drawbar). Replaces B2198R. (Part No: AA5365R)
$22.44

Drawbar Pivot Pin
- For tractor models (620 from SN# 13100 and above), (G from SN# 18700 and above), 630, 70, 720, 730. Replaces F856R, AF1318R. (Part No: AF3759R)
$26.20

Universal Drawbar Lock
- For Cat. 1 drawbars up to 1 1\2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: DBL2)
$20.93

Drawbar
- For model M and MT. Clevis type hitch bar. (Part No: AM404T)
$123.70

Drawbar Lift Link
- This drawbar lift link fits the following tractor models: M with 24 inch tires. It measures 11 inches from center to center on the pin holes. There are 2 used per tractor and they are priced individually. (Part No: AM470T)
$37.50

Drawbar Hammerstrap Pin
- T-Shaped Pin measures 6.181 inches long and 1.248 inch diameter. Also replaces AR937R. For tractor models using this pin: 1020, 1250, 1450, 1530, 1650, 2010, 2020, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2510, 2520, 2550, 2555. (Part No: AR69988)
$26.99

No
Picture
Drawbar Hammerstrap
- Add $10 additional shipping due to weight. If ordering on-line, additional charge will be added after you receive your on-line order confirmation. For tractor models 6800, 6810, 6900, 6910, 7200, 7210, 7330, 7400, 7405, 7410, 7420, 7430, 7510, 7520, 7530, 7600, 7610, 7630, 7700, 7710, 7720, 7730, 7800, 7810, 7815, 7820, 7830, 7920, 7930, 8100, 8110, 8120, 8130, 8200, 8210, 8220, 8225R, 8230, 8245R, 8270R, 8295R, 8300, 8310, 8320, 8330, 8345, 8400, 8410, 8420, 8430, 8520, 8530. (Part No: R88665)
$89.64

No
Picture
Front Drawbar Support
- Add $10 additional shipping due to weight. If ordering on-line, additional charge will be added after you receive your on-line order confirmation. For tractor models 6800, 6810, 6820, 6900, 6910, 6920, 7200, 7210, 7400, 7405, 7410, 7420, 7510, 7515, 7520, 7600, 7610, 7700, 7710, 7800, 7810. (Part No: L76088)
$121.14

Drawbar Support, Rear
- This is a New Rear Drawbar Support used on John Deere 4050, 4055, 4240, 4240S, 4250, 4255. It replaces original part number AR74165 (Part No: AR74165)
$240.93

Drawbar
- This Drawbar has a 2 inch offset. It is 45.625 inches long, 3.000 inches wide and 1.500 inches high. Holes are 1.031 inches in diameter and are located at 1.656, 2.963, 5.532 and 8.581 inches from the front. It replaces original John Deere part number R61184 (Part No: R61184)
$235.94

Drawbar Hammerstrap
- The Hammerstrap is used with R36608, R50984, R61184, R51771 Drawbars. It Replaces RE19375, AR35912, AR74170, AR35912 (Part No: R78214)
$99.44


Click here to see parts by model







PayPal


Customer Service
Monday - Friday
9:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure


  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2015 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.