FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 630 Tractor Parts

[Categories] [All John Deere Models] [Print]

Belts

No
Picture
Belt - Side Draper - For John Deere tractor model 630 (FD s/n 785000-later), Replaces John Deere OEM number AXE31445, Fits Left Hand Or Right Hand Side, Length: 295", Width: 39.93", Plies: 1, Guide Style: V, (Item #: 165515) $2154.45

Brakes

Brake Housing Gasket. - Fits John Deere - A (sn: 584000 and up), [AO, AR (sn: 272000 and up)], [60, 620, 630 (No Hi-Crop)]; Replaces: A3789R (Item #: 178585, Ref: A3789R) $7.50

Brake Lining Kit - Fits R, 70, 80, 520, 530, 620, 630. Does NOT fit High-Crop Models. Includes: 4 linings with 40 rivets. 10-1/2" Outer Curvature, 2-1/4" Wide. Replaces: RE227939, AR604R (Item #: 113312, Ref: AR604R) $46.30

Brake Linings With Rivets - For 60, 620 HI-CROP, 620 ORCHARD, 630 HI-CROP, 630 ORCHARD, 70 HI-CROP, 720 HI-CROP, 730 HI-CROP, A AFTER SN# 410000, AO AND AR AFTER SN# 250000, G, GH, GN, GW. Brake Linings with rivets. Includes (4) linings and 32 rivets. (Item #: 105603, Ref: AA4253R) $31.40

Brake Oil Seal - This brake oil seal has a 1.5 inch Inside Diameter, a 1.987 inch Outside Diameter and is .313 inch wide. It Fits: 520, 530, 620, 630, 720, 730. Replaces: AF2788R, AR20149R, CR14832 (Item #: 168618, Ref: AR20149R) $16.00

No
Picture
Brake Pinion Shaft - For tractor models 620, 630 GP and STD. (Item #: 180706, Ref: R0731) $182.00

Brake Shoe Pair - These brake shoes measure 10-1/2 inches overall outer curved length and 1-3/4 inches wide. Used on John Deere A, G, 60, 70 High-Crop, 630 High-Crop, 730 High-Crop, AO, AR for differential brakes not rear wheel brakes, 620 Orchard and High-Crop, 720 High-Crop. Replaces RE204401, AA314R. Price is for one pair / one wheel. (Item #: 178911, Ref: AA314R) $136.00

Brake Shoe Spring - Fits John Deere - 820 2 cylinder, 830 2 cylinder (GAS), 830 2 cylinder (DSL), A, G, R, 60, 70, 80, 520, 530, 620, 630, 720, 730; Replaces: R21753, R21753R, A348R (Item #: 125768, Ref: R21753) $4.50

Brake Shoes, Set of 2 - This is a Riveted Brake Shoe Assembly pair. Services one wheel. Two sets needed per tractors. Used on John Deere 70 Row-Crop and Standard, 630 Row-Crop and Standard, R, 80, 520, 530, 620. Overall outer curved length: 10-1/2 inches, Width: 2-1/4 inches. Replaces AR483R, RE227938 (Item #: 178918, Ref: AR483R) $136.00

No
Picture
Disc Bearing Kit - Disc bearing kit, with Dura-Flex bearings. Fits disc models: 210, 215, 220, 230, 235, 621, 630. Contents of kit TP-AA30941: (1) TP-AA28184 bearing (import), (1) TP-AA27172 flange kit, (1) TP-AA33968 gasket, and HDW. For 210, 215, 220, 230, 235, 621, 630 (Item #: 154644, Ref: TP-AA30941) $30.00

Clutch

$John Deere 630 Castle Nut - 9\16 inch$
Castle Nut - 9/16" - For John Deere tractor models A (s/n 648000-later), AO (s/n 273080-later), AR (s/n 273080-later), G, R, 60, 70, 80, 620, 630, 720, 730, 820, 830, 840, Replaces John Deere OEM number R20228, 14H862, AD2850R, D2789R, 9/16" - 18NF Grade 5, (Item #: 126123) $4.80

Clutch Adjusting Spring - This Clutch Adjusting Spring measures 1.915 inches long with a 0.120 inch wire thickness. The clutch disc adjusting spring mounts to the outer cast iron adjusting disc. Three used per tractor. Sold individually. (Item #: 118280, Ref: A352R) $2.70

No
Picture
Clutch Bushing - For tractor models 620, 630, 70, 720, 730. (Item #: 179488, Ref: F1390R) $53.00

Clutch Collar (Fork) - The collar has (2) 1/2 inch slotted pivot holes, measures 0.313 of an inch in thickness, and has an inner diameter of 5 inches. For the John Deere 620 serial number 6217318 and up, and 630. Replaces OEM number R20181 (Item #: 134633, Ref: R20181) $273.00

Clutch Cover - For A after SN# 648000, G after SN# 13804, 60, 620, 630, 70, 720, and 730. Not painted. This part has an I.D. of 12.1875 inches by 1.0625 inches Thick. Please verify size before ordering. Does not include springs part number R5071. Also Replaces F821R. (Item #: 105719, Ref: F821) $35.70

Clutch Cover Spring - Comes with rivet, 3 required per tractor sold individually. For tractor models A, G, 60, 520, 530, 620, 630. Replaces: Rivet 16H644, Spring A6121R (Item #: 126162, Ref: A6121R) $15.50

Clutch Drive Disc - 20 tooth, 6 spline, 9.940 inch diameter. For JD 620, 630 tractors. (Item #: 110136, Ref: A5642R) $154.00

Clutch Drive Disc, Sliding - Sliding Drive Disc is 20 spline, 10 inch O.D. For tractor models 60, 620, 630, 70, 720, 730 tractors. (Item #: 105720, Ref: A4355R) $60.00

No
Picture
Clutch Drive Disc, Used - For John Deere tractor models 620, 630, Replaces John Deere OEM number A5642R, Teeth: 20, Spline: 6, Size: 9.940", For a new version of this item use Item #: 110136, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435471) $88.01

Clutch Facing - Pulley clutch facing. Floating. For tractor models A, G, 60, 70, 620, 630, 720, 730. 10 inch outside diameter, 6-3/4 inch inside diameter, 1.575 inch wide, .15 inch thick. For 60, 620, 630, 70, 720, 730, A, G. Replaces: C614R, R90215. PRICED EACH. If you order 1, you will receive only 1 clutch facing. (Item #: 105721, Ref: TP-C614R) $11.80

Clutch Facing, Pulley - Fits A serial number 648000 and up - 1 used per tractor, G - 1 used per tractor, 60 - 1 used per tractor, 70 - 2 used per tractor, 630 - 1 used per tractor, 730 - 2 used per tractor, AO serial number 273080 and up - 1 used per tractor, AR serial number 273080 and up - 1 used per tractor, D serial number 109944 and up - 1 used per tractor, 620 - 1 used per tractor, 720 - 2 used per tractor. Sold individually. Replaces AA6129R, AD1027R, AD752R, RE22932, RE29779. (Item #: 105718, Ref: AA6129R) $40.60

Clutch Handle Bushing - Used with D2031R Clutch Handle Pivot Bolt, this bushing measures 0.750 inches inside diameter, 0.815 inches outside diameter, and 1.373 inches long. Replaces A1197R and R51192 Use on 2 cylinder models: A, G, 60, 70, 630, 730, AO, AR, BO, BR, D, GP, R, 80, 520, 530, 620, 720, 820, 830, 840. (Item #: 126143, Ref: A1197R) $9.00

Clutch Handle Pivot Bolt - The measurements on this Clutch Handle Pivot Bolt 0.750 inches O.D. to 0.625 inches O.D. 4-1/4 inches length. Replaces D2031R and R121197. Used on John Deere 2 cylinder models: A, G, 60, 70, 630, 730, AO, AR, BO, BR, D, GP, R, 80, 520, 530, 620, 720, 820, 830, 840. Uses Bushing A1197R (Item #: 114893, Ref: D2031R) $21.30

Clutch Operating Bolt - 3 used per tractor, sold individually. For tractor models 60, 620, 630. (Item #: 126152, Ref: A4354R) $36.30

Clutch Pin - Clutch linkage pin. Made in the USA, 9/16" diameter, 1/16" oversized to compensate for wear, use 9/16" drill to ream orginal hole, two used per tractor. For tractor models A, D, R, G, 60, 70, 520, 530, 620, 630, 720, 730. (Item #: 178321, Ref: D1994R) $14.90

Clutch Plate - Replaces OEM# A4355R. For A, D, G, 60, 620, 630, 70, 720 (Item #: 105720, Ref: R0724) $60.00

Clutch Pulley - For tractor models 620, 630. (Item #: 126124, Ref: AA6729R) $553.00

Clutch Pulley Brake Pad - For tractor models A, B, 50, 520, 530, 60, 630, 70, 720, 730. Sold individually. Replaces: AB4748R, AF4748R, RE29790 (Item #: 108125, Ref: RE29790) $12.40

Dog, Clutch - For tractor models 620, 630, 70, 720, 730, A, AO, AR, D, G, GH, GN, GP, GW. Trhee required per tractor. (Item #: 126127, Ref: C74R) $32.80

Pressure Plate Spring Washer - For John Deere tractor models A, B, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 840, I.D. 0.572, O.D. 0.937, Thickness 0.035, Steel Spring, (Item #: 126159) $3.40

Cooling System

Fan Drive Disc - For tractor models A, (B SN# 171992 and up), (G SN# 13910 and up), (H SN# 50500 and up), 50, 520, 530, 60, 630, 70, 720, 730. Also replaces B2123R. Measures 3.627 inches O.D., .747 inch Spline diameter, 10 splines, .989 inches thick. 2 Used per tractor, price is each. (Item #: 112427, Ref: AB3314R) $40.00

Fan Friction Washer - For John Deere tractor models ANH, AO (s/n 264644-later), AO, AR (s/n 264644-later), AW, B, BN, BNH, BO (s/n 334150-later), BR (s/n 334150-later), BWH, D (s/n 30400-later), G (s/n 13910-later), GH (s/n 13910-later), GM (s/n 13910-later), GN (s/n 13910-later), GW (s/n 13910-later), H (a/n 50499-earlier when converted to friction style fan drive), HNH (a/n 50499-earlier when converted to friction style fan drive), HWH (a/n 50499-earlier when converted to friction style fan drive), 50, 60, 70, 520, 530, 620, 630, 720, 730 (gas / diesel / LP), Replaces John Deere OEM number D399R, R105808, 3-1/2" O.D., 1-1/8" I.D., 1.100" thick, (Item #: 115008) $6.10

$John Deere 630 Fan \ Generator Belt$
Fan / Generator Belt - This Fan Belt measures 45.57 inches length and 0.453 inch width wedge belt. Direct replacement to A4897, A4897R, TX10276, 102752A, 303045080. Used on John Deere 60 series (s/n 30000 and up), 70 series (s/n 8100 and up), 70 dsl, 620, 630, 720, 730.. Please verify measurements before ordering Verify correct spark plug size and type (Item #: 168335, Ref: A4897R) $9.10

Fan Shroud - For model A after SN# 487999, 60, 620, 630, all Rowcrop, Standard and Orchard. (Item #: 115522, Ref: AA5817R) $92.00

Fan Shroud, Used - For John Deere tractor models 60 (rowcrop), 620 (rowcrop), 630 (rowcrop), Replaces John Deere OEM number AA5817R, For a new version of this item use Item #: 115522, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 415522) $47.01

Pulley, Water Pump - 3/8" wide, used with AB4951R, AA6327R water pumps. For tractor models (50 SN# 5016058 and up), 520, 530, (60 SN# 6030000 and up), 620, 630. (Item #: 172355, Ref: A4898R) $77.00

Radiator Cap - For tractor models 50 SN# 5016616 and later, 60 Regular SN# 6030927 and later, 60 Standard SN# 6043000 and later, 70, 70 Diesel, 80, 420, 430, 435, 440, 520, 530, 620, 630, 720, 720D, 730, 730D, 820, 830, 840, 1010, 8020. Replaces AA5757R. Cap is 3 1/4 outside diameter, fitted for a 2 notch 2 1/4 inch radiator neck. (Item #: 109933, Ref: 400065) $23.10

Radiator Core - Radiator Core - 60, 620, 630. Does not come with gasket. Note in comments section of order form (Radiator Gasket Set is R2174G) if required. (Item #: 101893, Ref: AA5582R) $325.00

Radiator Core Bolt Kit - For John Deere tractor models 520, 530, 620 (Orchard), 630, May have unused hardware (depending on model), (Item #: 115515) $50.00

Radiator Core Gaskets - Cork - For John Deere tractor models A (s/n 488000-later), 60, 620, 630, Replaces John Deere OEM number A2153R, 5-1/2" x 18-1/2", Bolt Holes: 20, Material: Cork, Sold as a pair, Radiator Core Gasket - Paper use Item #: 111905, (Item #: 118496) $18.50

Radiator Filler Neck - This brass radiator filler neck is used on 530, 630, 730 (Diesel), 730. Replaces: AR20515R (Item #: 179555, Ref: AR20515R) $73.00

Radiator Gaskets - These radiator gaskets are used with AA2235R radiator core. John Deere A, AO, AR, 60, 620, 630 (Item #: 111905, Ref: A2153R) $18.60

Radiator Gaskets, Set of 2 - These radiator gaskets are used with AA2235R radiator core. John Deere A, AO, AR, 60, 620, 630 (Item #: 111905, Ref: A2153R) $18.60

$John Deere 630 Radiator Hose - Bulk 3 x 2-5\8 inch$
Radiator Hose - Bulk 3 x 2-5/8" - For John Deere tractor models A (s/n 477000-later), AO (Styled s/n 272000-later), AR (Styled s/n 272000-later), B, 60, 620, 630, Replaces John Deere OEM number A3317R, A4636R, B1808R, R32656, I.D. (A): 2-5/8", O.D.: 3", Length: 3', For Hose Clamp use Item #: 130470, (Item #: 150822) $38.00

No
Picture
Radiator Strap - For tractor models: 60, 620, 630, 70, 720, 730, A, AO, AR, (G from s/n 13000 and up). (Item #: 180708, Ref: A192R) $21.60

Radiator Tank, Top - For tractor models 620, 630 except Orchards. Replaces: A5722R, R20880R (Item #: 180693, Ref: R20880R) $499.00

No
Picture
Water Pipe, Upper - For tractor models (60 LP SN# 6026000 to 6030926), (60 from SN# 6054580 and above), 620, 630. (Item #: 157975, Ref: A4942R) $105.00

$John Deere 630 Water Pump, 3\8 in. pulley$
Water Pump, 3/8 in. pulley - For A (SN# 7002000 and above), AO and AR (SN# 281400 and above), 620, 630, 60. Water Pump comes with 3/8" width Pulley. Comes with by-pass connection. Can be used with or without the by-pass connection. If by-pass is not used, plug can be ordered as part # F2282R. Replaces casting number R5318R. (Item #: 111167, Ref: AA6327R) $112.00

Water Pump Gasket - For John Deere tractor models A (s/n 700200-later), 60 (s/n 6030000-later), 620, 630, Replaces John Deere OEM number A4281R, (Item #: 154664) $3.90

Water Pump, Remanufactured, AA6327R - For John Deere tractor models 60 (s/n 6054500-later), 620, 630, Replaces John Deere OEM number AA6327R, Replaces John Deere Casting number A5318, Casting No. A5318, Pulley: A4898 3/8" width, Includes mounting gasket, With pulley, For a New version of this sku use Item #: 154664, (Item #: 204223) $98.01

$John Deere 630 Wire Hose Clamp - 3 inch to 3-9\32 inch$
Wire Hose Clamp - 3" to 3-9/32" - For John Deere tractor models A, B, BN, BNH, BW, BWH, 60, 620, 630, Replaces John Deere OEM number A448R, B1813R, 3" - 3-9/32" (76mm - 84mm), Ideal for 3-1/4" O.D. hose, (Item #: 130434) $9.10

Decals and Emblems

Be Careful Plate - This Plate is used one 530, 630, 730, 830 2 cylinder (Item #: 109935, Ref: R4474) $15.20

Decal Set - For model 630 Gas. This is a set of 16 self-adhesive decals. These are printed on Mylar, not die cut. (Item #: 183365, Ref: R0879) $57.00

No
Picture
Decal Set - Decal Set for John Deere Model 630 (Item #: 183365, Ref: R0879) $57.00

Front Medallion - 5 3/4 x 4 1/8. For tractor models 630, 730, 830. Front Medallion. (Item #: 103950, Ref: AR21112) $103.58

Hood Decal, 630 - For John Deere tractor model 630, Replaces John Deere OEM number JD630, (Item #: 164927) $47.60

Drive Train

Flywheel Cover Inspection Plate - For tractor models A, B, 50, 60, 70, 520, 530, 620, 630, 720, 730. (Item #: 125037, Ref: AB3579R) $34.70

Gear Shift Knob - Plastic knob, 3/8 inch fine thread. For tractor models (A styled from serial number 648000), AR, AO, (B styled from serial number 201000), (G styled from serial number 13000), 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, (820, 830 2-cylinder). (Item #: 109545, Ref: 03501AB) $5.40

Rear Axle Felt Seal - 3.50" I.D., 4.683" O.D., .425" thick. For tractor models (A up to SN# 547321, (AN up to SN# 547321), (AW up to SN# 547321), (ANH SN# 583999 and up), (AWH SN# 583999 and up), (60 all Orchard and Standard), (620 Orchard only), (630 Orchard only). (Item #: 179833, Ref: A380R) $39.00

Electrical System

Ammeter, Black - Black ammeter for John Deere. Fits A, AO, AR, B, BO, BR, LA, LI, GN, GW, 50, 60, 70, 80, 320, 33, 520, 620, 630, 720 gas or diesel, 730 gas or diesel, 820, 830. Replaces AF2749R, AM1864T (Item #: 150259, Ref: 2348944) $29.40

Battery Hold Down - For John Deere tractor models 50, 60 (s/n 6017061-later and Standard s/n 6043000-later), 520, 530, 620, 630, Replaces John Deere OEM number AA6597R, AB4650R, AA7338R, Inside Length x Width: 9-1/4" x 7-1/8", Comes primered (color may vary). Prior to painting check fitment, (Item #: 126467) $43.70

Battery Strap - Battery Ground Straps. A to SN# 676000/up, B SN# 286910/up, G SN# 51143/up, R, 50, 60, 70, 80, 520, 530, 620, 720, 730, 820, 830, 5010. 2 gauge, length 7 inches terminal type Std+. For 50, 5010, 520, 530, 60, 620, 630, 70, 720, 730, 80, 820, 830, A, B, G, R (Item #: 115790, Ref: TP-AB4100R) $11.80

Coil, 6V - Distributor Coil, 6 volt. Delco Remy equipped. For tractor models B, M, 40, 50 (after 5021479), 60LP, 70LP, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 1020, 2010, 2020, 3010, 3020, 4010, 4020 - DR1115380, 1115381. For 1010, 1020, 2010, 2020, 3010, 3020, 320, 330, 40, 4010, 4020, 420, 430, 440, 50, 520, 530, 60LP, 620, 630, 70, 720, 730, B, M. Replaces AM373T. (Item #: 105281, Ref: D4PE12029AA) $16.30

Distributor Cap - This Distributor cap for a 2 Cylinder with a Delco Distributor, Vertical, 12 Volt. Plug connectors on cap are at 90 degrees or 12:00 o-clock and 3:00 o-clock. For Delco distributors up to 1963 on models: A, AR, AO, B, G, M, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 2010, 3010, 4010, 114W, 116W, 323W. Balers~ 25, 30, 40, For 1010, 105, 114W, 116W, 12, 2010, 215, 215A, 25, 299, 30, 3010, 320, 323W, 330, 40, 4010, 420, 430, 440, 45, 50, 520, 530, 55, 60, 600, 620, 630, 65, 70, 700, 720, 730, 95, 99, A, AO, AR, B, G, M. (Item #: 111725, Ref: 1935038) $15.00

Distributor Cap - For John Deere tractor models 520, 530, 620, 630, 720, 730, Wico Distributor: DB, (Item #: 121510) $30.00

Distributor Cap, Vertical, 6 Volt - Distributor cap for Delco distributor, 2 cylinder, vertical, Please note the orientation of the 2 non-plugged terminals on top of the distributor cap (click "enlarge image"), there are two different orientations available (see Part No: 1935038 for the other orientation). Fits A, B, G, M, 320, 330, 40, 420, 440, 50, 520, 530, 60, 620, 630, 70, 720, 730. (Item #: 103152, Ref: 1909008) $10.20

Distributor Dust Cover - Fits early Delco Distributor with Clip Held Cap. For tractor models A, AR, AH, AN, ANH, AO, B, BR, BN, BNH, BW, BWH, G, GN, GW, M, MC, MI, MT, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 2010, 3010, 4010. (Item #: 103153, Ref: 1900119) $9.70

No
Picture
Distributor, Rebuilt - This Rebuilt Distributor comes complete with Cap, Points, Condenser and Shaft Gear. For tractor models 520, 530, 620, 630, 720, 730. Replaces 1112576. Add $50.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203515, Ref: 1112576) $522.01

Distributor Shaft Bushing and Shim Kit - Delco Distributor Shaft Bushing and Shim Kit. Fits M, MC, MI, MT, 320, 330, 40, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 2010, 3010 with one of the following Delco distributors: 1112623, 1112623, 1112577, 1112648, 1112581, 1111418. Replaces: washer: 811912, shim washer: 810074, 810078, bushing: 1909003, 1952334 (Item #: 178103, Ref: ABC3007) $29.30

Distributor Terminal Insulator Assembly, Delco - Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. Used on some of the following using Delco distibutors: A, AH, AN, ANH, AO, AR, AW, AWH, B, BN, BNH, BW, BWH, BWH40, D, G, GH, GM, GN, GW, 1010, 2010, 3010, 4010, 420, 430, 50, 520, 530, 60, 620, 630, 70, 720, 730. Replaces: 12H290R, 817363, 1909206, 1914142, 1916805, 1916806 (Item #: 111468, Ref: 1904376) $14.80

Electronic Ignition Conversion Kit, 12 Volt Negative Ground - For tractor models 50, 60 and 70 Gas with Delco 1112569; 520 and 530 Gas with Delco 1112569; 60, 70, 620, 630, 720, 730 Gas with Delco 1112576. Electronic Ignition Conversion Kit, replaces points and condenser with an electronic module. Use on 12 volt negative ground system. (Item #: 105066, Ref: 1122) $152.00

Electronic Ignition Conversion Kit, 12 Volt Positive Ground - Use on the following tractors: 50, 60, 70, 520, 530, 620, 630, 720, and 730 with 2-cylinder gas engine using Delco distributor # 1112569 or 1112576. Electronic ignition conversion kit by Pertronix. Replaces points and condenser with an electronic module. Used Only on tractors with 12 volt POSITIVE ground systems. (Item #: 105067, Ref: 1122P12) $171.00

Electronic Ignition Conversion Kit, 6 Volt Positive Ground - Use on the following tractors: 50, 60, 70, 520, 530, 620, 630, 720, and 730 with 2-cylinder gas engine using Delco distributor # 1112569 or 1112576. Electronic ignition conversion kit by Pertronix. Replaces points and condenser with an electronic module. Used Only on tractors with 6 volt POSITIVE ground systems. (Item #: 185292, Ref: 1122P6) $154.00

Governor Weight, Used - For John Deere tractor models B, BN, BNH, BO, BR, BW, BWH, 50, 70, 520, 530, 620, 630, Replaces John Deere OEM nos AB295R, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499799) $76.01

Headlight Wiring Harness Kit - For John Deere tractor models 520, 530, 620, 630, 720, 730, For 4 Light, Flat Top Fenders, Headlight harness only, (Item #: 113778) $160.72

Ignition Kit, Delco Clip-Held Distributor Cap - Contains points, condenser, and rotor. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. For: A, AN, AH, AR, AO, B, BN, BW, D, G, M, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010 (to 42000), 2010 (to 42000), 3010 (to 1E32999), 4010 (to For 1010), 105, 114W, 116W, 2010, 215, 215A, 25, 299, 30, 3010, 320, 323W, 330, 40, 4010, 420, 430, 440, 45, 50, 520, 530, 55, 60, 600, 620, 630, 65, 70, 700, 720, 730, 95, 99. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583, 1111558. (Item #: 103151, Ref: ATK1DCR) $10.30

Light Clamp - This Light Clamp fits: (A Styled models up to serial number 583999 with cast iron dash), (B Styled models up to serial number 200999 with cast iron dash), (G serial number 13000 and up for rear light only), H, (60, 620, 630 Standard and Orchard), (8020 Used as an oil level pipe clamp). Replaces: A2613R (Item #: 126559, Ref: A2613R) $10.80

$John Deere 630 Push Button Starter\Horn Switch, Used$
Push Button Starter/Horn Switch, Used - For John Deere tractor models 530, 630, 730, 830, 2510, 2520, 2840, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4630, 4640, 4650, 4760, 4840, 4850, 4960, 5010, 5020, 6030, 7520, 8020, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Combine(s) 3300, 4400, 4420, 6600, 6602, 7700, Compatible with John Deere Harvester(s) 5440, 5460, 5720, 5730, 5820, 5830, Replaces John Deere OEM number AR21823, For a new version of this item use Item #: 121158, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421158) $5.01

Push Button Starter Switch - 3 Terminal Push Button Starter Switch with Rubber Cap. Fits 80, 720, 730, 820 2 cylinder, 830 2 cylinder (with Pony start)530, 630, 730 (Gas, LP, All fuel. This starter switch has 5/8 - 32" thread O.D., 3 screw terminals. Switch is rate up to 36 volts. Replaces: AR21219, AR21823, AR20431, AR1324R (Item #: 121158, Ref: AR21219) $11.40

Rear Wiring Cover - For 520, 530, 620, 630, 720, 730 (cut to length). Rear Wiring Cover from the wiring harness to axle housing. (Item #: 115559, Ref: AR20932R) $17.90

Rotor - Used with Delco distributors with a clip held cap. For tractor models: A, AO, AR, B, D, G, M, MC, MT, 320, 330, 40, 420, 430, 50, 520, 530, 60, 620, 630, 70, 720, 730, 1010 (1112577), 2010 (1112577), 3010 (1112577), 3020 (up to serial number 58899 and 1112577), 4010 (up to serial number 39499 and 1112581). Replaces 1905590. (Item #: 110177, Ref: 1750498M1) $3.80

Rubber Grommet - For John Deere tractor models H, M, MC, MT, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 1350, 1530, 2240, 2440, 2510, 2630, 2640, 3020, 4000, 4020, 4030, 4230, 4320, 4430, 4520, 4620, 4630, 5020, 6030, 8430, 8630, Replaces John Deere OEM number H987R, M305T, Can be used for hole in spark plug cover, fuel tank pads and electric wire grommet, (Item #: 126661) $2.00

Solenoid - Starter Solenoids. Solenoid assy~ base mount. services starter 1113672 on model 3020D, Serial Number 1T123000 and up~ 4030D, 4230D, Replaces Delco 1115510{D971}, AR77255. 620 (Orchard models with SN: 6223000 and up), 630, 730 (Gas and LP); 12 volt {B}. For 3020, 4030, 4230D. Replaces 1009784M91, 1017877M92, 1028587M91, AR11049, AR11050, AT11593, R11292. (Item #: 105672, Ref: 1115510) $30.00

Spark Plug Cover, LH - For tractor models 520, 530, 620, 630, 720, 730. Left Hand Side. Includes rubber grommet. ***NOTE: Picture shows both but this is only the left hand side. (Item #: 110303, Ref: F2630R) $47.00

Spark Plug Cover, RH - For tractor models 520, 530, 620, 630, 720, 730. Right Hand Side. Includes rubber grommet.***NOTE: Picture shows both but this is only the right hand side. (Item #: 110049, Ref: F2631R) $47.00

Spark Plug Wire Set - 2 cylinder spark plug wire set with 90 degree boots. For the following models: A, AI, AO, AR, B, BO, BR, D, G, GP, GPO, H, L, LA, 50, 520, 530, 60, 620, 630, 70, 720, 730. (Item #: 128569, Ref: JDS643) $16.70

No
Picture
Starter - Delco Style DD (3863), Remanufactured, Delco Remy, 1113092, AR11011 - For John Deere tractor model 630, Replaces John Deere OEM number AR11011, TY6644, TY6708, Replaces Delco Remy manufacturer number 1113092, Replaces manufacturer number 3863, Delco Style: Direct Drive, Voltage: 12, Rotation: Clockwise, Teeth: 11, (Item #: 203412) $710.70

Starter Drive - For 630. Starter Drive. 11 Teeth. Note: Not a complete starter. (Item #: 110775, Ref: 1935414) $31.90

No
Picture
Starter Drive Housing - For John Deere tractor models 620, 630, Replaces John Deere manufacturer number 2107-074000, (Item #: 111359) $301.00

No
Picture
Starter Nose Cone - For John Deere tractor models 620, 630, Replaces John Deere OEM number AR11045R, Replaces Delco Remy Starter number 1113092, (Item #: 120887) $234.00

Starter Switch - This Single Terminal Switch Replaces; 193D496. For tractor models 520, 530, 620, 630, 70, 720, 730. (Item #: 121143, Ref: 1930496) $16.80

Switch - Combination ignition and light switch, 12 volt. For tractor models 530, 630, 730. Replaces OEM# AR20430. (Item #: 105694, Ref: TP-AR20430) $29.20

Tune-up Kit - This Tune-up Kit is for John Deere tractors with 2 cylinder gas engines. Contains: Autolite spark plugs (AL 3076), heavy duty points, condenser, rotor, and gap gauge. Using 7/8-18 thread, 5/8 reach, 15/16 hex spark plug. For Delco distributor thru 1963. For tractor models 320, 330, 40, 50, 520, 530, 60, 620, 630, 70, 720, 730. (Item #: 111810, Ref: JTTK3) $35.31

Tune-up Kit - This Tune-up Kit is for John Deere tractors with 2 cylinder gas engines. Contains: Autolite spark plugs (AL 386), heavy duty points, condenser, and rotor. Using 18m, 1/2 reach, 7/8 hex spark plug. For Delco distributors thru 1963. Fits tractors: 50, 520, 530, 60, 620, 630, 70, 720, 730. (Item #: 111811, Ref: JTTK4) $23.70

Voltage Regulator - Voltage Regulator, (12 volt) for 1100309 Generator. Fits A, 50, 520, 530, 60, 620, 630, 70, 720, 730 tractors. (AI) (Item #: 105293, Ref: 1118792) $33.40

Voltage Regulator, External, 12 Volt - This 12 Volt Saddle Mount Voltage Regulator has 3 Terminals. For 12V A, G, 50, 60, 70, 520, 530, 620, 630, 720, 730, all using generator 1100309. Replaces regulator 1118792. Saddle Mount (Item #: 105293, Ref: VR1820) $33.40

Engine Bearings

$John Deere 630 PTO Shaft Oil Seal Housing Gasket\Shim$
PTO Shaft Oil Seal Housing Gasket/Shim - For John Deere tractor models 60, 70 (Used on Rowcrop), 620, 630, 720, 730 (Used on Rowcrop), Replaces John Deere OEM number F1459R, F1460R, Priced and Sold in Sets of Gaskets, (Item #: 125636) $14.60

No
Picture
Rod Bearings - For tractor models 620, 630. Rod Bearings. Priced each. 2 required per engine. Available in Standard, .010, .020, .030. Specify size in comments section of order form when ordering. (Item #: CB-643P) $29.80

Engine Gaskets

No
Picture
Full Gasket Set - For two cylinder Models: 620, 630. (Item #: 178992, Ref: FS3134) $326.00

Head Gasket Set - For tractor models 620, 630. (Item #: 106872, Ref: HS3134) $167.00

Oil Pump Gear Cover Gasket - For John Deere tractor models A (s/n 424025-later), ANH (s/n 424025-later), AO (s/n 251486-later), AR (s/n 251486-later), AW (s/n 424025-later), B, BN, BNH, BO, BR, BW, BWH, G, GH, GM, GN, GW, H, HNH, HWH, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830, 840, Replaces John Deere OEM number B246R, 0.020" Thick, 4 Bolt Hole, (Item #: 164422) $6.00

Oil Pump to Crankcase Gasket - For John Deere tractor models A (s/n 424025-later), AO (s/n 251486-later), AR (s/n 251486-later), AW (s/n 424025-later), B, BN, BNH, BO, BR, BW, G, GH, GM, GN, GW, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, Replaces John Deere OEM number B251R, 0.031" Thick, 3 Bolt Hole Pattern, (Item #: 164421) $8.10

Rear Crankshaft Seal - This rear crankshaft seal has a 4 inch Inside Diameter, a 5.004 inch Outside Diameter and is .5 inch wide. Fits JD 620, 630, 720, 730. OEM Reference #: 303072959, 303072959, A39111, A36610, 163666F, 163666B, A39027, A51339, AF2659R, AF2426R. (Item #: 107461, Ref: A51339) $23.20

Valve Cover Gasket - This valve cover gasket fits the following tractor models: 620 and 630. Replaces part number: A5650R. (Item #: 167576, Ref: A5650R) $51.57

Engine Rebuild Kits

Rebore Kit - Piston Kit For Gas 620 and 630. 5 1/2 inch bore.090 oversize. Contains pistons, rings, pins, and retainers. (Item #: 133280, Ref: R1988) $860.00

Rebore Kit - Piston Kit For Gas 620 and 630. 5 1/2 inch bore.125 oversize. Contains pistons, rings, pins, and retainers. (Item #: 189290, Ref: R1989) $840.00

No
Picture
Valve Train Kit - Kit Replaces: Intake Valve (2) A5627R, Exhaust Valve (2) A5628R, Guide (4) A5707R, Spring (4) A4936R, Keepers (8) A2332R. For Gas 620, 630. (Item #: 192572, Ref: VTKJD620) $570.00

Engine Parts

Connecting Rod, Remanufactured, A5554R - For John Deere tractor models 620, 630, Replaces John Deere OEM number A5554R, (Item #: 204236) $146.01

Countershaft Gear, Used - For John Deere tractor models 620, 630, Replaces John Deere OEM nos A5562R, Teeth: 40, 1st and 3rd Speed, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498587) $95.01

Crankcase Vent Tube - For tractor models: 60 without power steering, 620, 630, (A from s/n 648000), (AO, AR from s/n 273080). (Item #: 187327, Ref: A4035R) $60.00

No
Picture
Crankshaft, Remanufactured, A5638R - For John Deere tractor models 620, 630, Replaces Casting number A5638R, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 203916) $490.01

No
Picture
Cylinder Head, Remanufactured, A5810R - For John Deere tractor models 620, 630 (gas), Replaces John Deere Casting number A5810R, Casting No. A5810R, Not a Welded Head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205420) $630.01

Heat Exchanger - For tractor models 60, 620, 630, 70, 720, 730. Replaces BMD# BH-A4644R. (Item #: 101593, Ref: A4644R) $23.40

Lifter, Remanufactured, R1354R - For John Deere tractor models 620, 630, Replaces John Deere OEM number R1354R, (Item #: 204240) $24.26

No
Picture
Ring Gear, Flywheel - This ring gear is for tractor models 620, 630. (Item #: 110996, Ref: A5641T) $140.00

Ring Gear, Flywheel - This Flywheel Ring Gear has 200 teeth. It fits John Deere - 620, 630; Replaces: A5641R (Item #: 110996, Ref: A5641R) $140.00

No
Picture
Valve, Exhaust - For tractor models 620, 630. Replaces A5628R. (Item #: 131572, Ref: R20246R) $40.70

Valve Guide - For tractor models 620, 630. Replaces AA6769R. (Item #: 190148, Ref: A5707R) $7.50

No
Picture
Valve, Intake - For tractor models 620, 630. Replaces AA6584R. (Item #: A5627R) $26.78

No
Picture
Valve Lock - Pair - This pair of valve locks is a set for 1 valve. For tractor models 60, 620, 630, 720, 730, 80, (820, 830 2 cylinders), (A from SN# 488000), (AO, AR from SN# 260000 and up), R, (70 gas, LP and diesel). (Item #: 185432, Ref: A2332R) $28.50

No
Picture
Valve Spring - For tractor models 620, 630. (Item #: A4936R) $18.00

Engine Rings

No
Picture
Piston Ring Set - 5-1/2" bore diameter, 8 compression rings 1/8", 4 oil rings 1/4". For tractor models 620, 620H, 620S, 6200, 630, 630H, 630S. (Item #: 129204, Ref: 2C7940) $274.00

Piston Ring Set - .040" Oversize - 2 Cylinder - For John Deere tractor models 620, 630, Compatible with John Deere Engine (s) 321 (gas), This is a custom made set that requires a 4 week lead time, Standard Bore: 5.500", Ring Size: .040" Oversize, Compression Rings per Piston: (3) @ .125", Oil Rings per Piston: (2) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .125", 2nd Groove Style: Torsional, 3rd Groove Size: .125", 3rd Groove Style: Torsional, 4th Groove Size: .250", 4th Groove Style: Cast Iron Oil / Inner Spring, 5th Groove Size: .250", 5th Groove Style: Cast Iron Oil, Sold as a complete 2 cylinder set, For standard use Item #: 128999, (Item #: 129123) $349.00

Piston Ring Set - .045" Oversize - 2 Cylinder - For John Deere tractor models 620, 630 (both gas), Compatible with John Deere Engine (s) 303 (gas), Replaces John Deere OEM number AA6820R, This is a custom made set that requires a 4 week lead time, Standard Bore: 5.500", Ring Size: .045" Oversize, Compression Rings per Piston: (4) @ .125", Oil Rings per Piston: (2) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome Compression, 2nd Groove Size: .125", 2nd Groove Style: Torsional, 3rd Groove Size: .125", 3rd Groove Style: Torsional, 4th Groove Size: .250", 4th Groove Style: Cast Iron Oil / Inner Spring, 5th Groove Size: .125", 5th Groove Style: Torsional, 6th Groove Size: .250", 6th Groove Style: Cast Iron Oil, Sold as a complete 2 cylinder set, For standard use Item #: 129207, (Item #: 129205) $298.00

Piston Ring Set - .090" Oversize - 2 Cylinder - For John Deere tractor models 620, 630 (both gas), Compatible with John Deere Engine (s) 303 (gas), This is a custom made set that requires a 4 week lead time, Standard Bore: 5.500", Ring Size: .090" Oversize, Compression Rings per Piston: (4) @ .125", Oil Rings per Piston: (2) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome Compression, 2nd Groove Size: .125", 2nd Groove Style: Torsional, 3rd Groove Size: .125", 3rd Groove Style: Torsional, 4th Groove Size: .250", 4th Groove Style: Cast Iron Oil / Inner Spring, 5th Groove Size: .125", 5th Groove Style: Torsional, 6th Groove Size: .250", 6th Groove Style: Cast Iron Oil, Sold as a complete 2 cylinder set, For standard use Item #: 129207, (Item #: 129206) $299.00

Piston Ring Set - .125" Oversize - 2 Cylinder - For John Deere tractor models 620, 630 (both gas), Compatible with John Deere Engine (s) 303 (gas), This is a custom made set that requires a 4 week lead time, Standard Bore: 5.500", Ring Size: .125" Oversize, Compression Rings per Piston: (4) @ .125", Oil Rings per Piston: (2) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome Compression, 2nd Groove Size: .125", 2nd Groove Style: Torsional, 3rd Groove Size: .125", 3rd Groove Style: Torsional, 4th Groove Size: .250", 4th Groove Style: Cast Iron Oil / Inner Spring, 5th Groove Size: .125", 5th Groove Style: Torsional, 6th Groove Size: .250", 6th Groove Style: Cast Iron Oil, Sold as a complete 2 cylinder set, For standard use Item #: 129206, (Item #: 129207) $299.00

Piston Ring Set - Standard - 2 Cylinder - For John Deere tractor models 620, 630, Compatible with John Deere Engine (s) 321 (gas), This is a custom made set that requires a 4 week lead time, Bore: 5.500", Ring Size: Standard, Compression Rings per Piston: (3) @ .125", Oil Rings per Piston: (2) @ .250", Top Groove Size: .125", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .125", 2nd Groove Style: Torsional, 3rd Groove Size: .125", 3rd Groove Style: Torsional, 4th Groove Size: .250", 4th Groove Style: Cast Iron Oil / Inner Spring, 5th Groove Size: .250", 5th Groove Style: Cast Iron Oil, Sold as a complete 2 cylinder set, For .040" use Item #: 129123, (Item #: 128999) $349.00

Exhaust System

Exhaust Chrome Curved Stack - Chrome For Unstyled A, G, 60, 70, 620, 630, 720, 730. 4 inch outside diameter, 24 inch in length. (Item #: 115068, Ref: R3551) $249.00

Exhaust Chrome Straight Pipe - Chrome Pipe is double wall construction with 4 bolt flange is 4" O.D. Length 24". For Unstyled A, G, 60, 70, 620, 630, 720, 730 (Item #: 111268, Ref: R3550) $228.00

Exhaust Manifold - For John Deere tractor models 60, 620, 630, Replaces John Deere OEM number A5751R, A5751, (Item #: 118736) $120.85

Exhaust Manifold Gasket Set - This Gasket Set is used with A4640R Manifold on John Deere 60, 620, 630. It replaces A4642R, R100312, AA7300R (Item #: 101592, Ref: R0058G) $29.10

Exhaust Stack - For John Deere tractor models A, G, 60, 70, 620, 630, 720, 730, Style: Straight, 4 Hole Base Plate, O.D.: 4", Length: 24", Double Wall Liner, Stainless Steel, Straight Stack - Chrome Plated use Item #: 115068, (Item #: 115066) $180.90

Heat Exchanger - For tractor models 60, 70, 620, 630, 720, 730. Replaces A4644R (Item #: 101593, Ref: A4664R) $23.40

Heat Exchanger, Clamp - Clamp with stud and nut, use with B3213R and A4664R heat exchangers. (Item #: 101590, Ref: A4645R) $6.90

Intake and Exhaust Manifold - For 60, 620, 630, all with Gas Engine. Gaskets not included. Does not come with gaskets. Gasket set available as part number R0058G. Replaces Intake: A4640R, A4641R, Exhaust: A5751R (Item #: 101591, Ref: A4640R) $294.00

Intake and Exhaust Manifold Kit - For John Deere tractor models 60, 620, 630, Contains Manifold 101591, Heat Exchanger 101593, Exchanger Clamp 101590 and Gasket Set 101592, (Item #: 108738) $333.00

No
Picture
Muffler - Vertical Exhaust Inlet I.D. - 4 Bolt Plate Outlet O.D. - 2 5/8 Overall Length - 21 For 60, 620, 630, 70, 720, 730 Gas70, 720, 730 Diesel. OEM# Use R1804 Rain Cap (Item #: 101169, Ref: R1084) $69.00

Muffler Pipe - A= 2 bolt inlet, B= 14" vertical length, C= 26" horizontal length, D= 2-1/2" outlet O.D.. Used with manifold A5751R and mufflers R21826R, AR20450 and AA2214R. Replaces AA6742R. For tractor models (620, 630 1956-1958 Row crop and standard models). (Item #: 107996, Ref: AR20584R) $55.00

Stainless Steel Muffler - For John Deere tractor models A (s/n 476999-earlier), AR, G, GM, 60, 70, 620, 630, 720, 730, Replaces John Deere OEM number AA2214R, AF3770R, Polished Stainless Steel, Overall Length: 24", Shell Length: 28.850", Shell Diameter: 3.735", Outlet OD: 2.440", (Item #: 164542) $152.15

Straight Pipe - Stainless Steel, Straight Stack. Double wall construction with 4 bolt flange. 24 inches tall, 3 1/2 inch outside diameter. For tractor models Unstyled A, G, 60, 70, 620, 630, 720, 730. (Item #: 178912, Ref: R3549) $250.00

Vertical Muffler - With inlet I.D. plate. Outlet O.D. is 2-5/8", Length is 21". OVAL SHAPED. For tractor models 60, 620, 630, 70, 730 Gas; and for diesel Models 70, 720, 730. (1084R) (Item #: 101169, Ref: AR20450R) $69.00

Fuel System / Air Intake

Air Cleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractors: 630, 730, 4020, 600, 500, 520, 530, 620, 720, 820, 830, 1020, 1030, 2130, 2150, 2240, 2355, 2555, 1010 diesel, 2010, 2020 diesel, 2030, 2040, 2150, 2255, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020. (Item #: 157279, Ref: R28794) $8.80

Air Cleaner Stack - This air cleaner stack fits tractor models: G, 620, 630, 720, and 730. It measures 23-3/4 inches tall, has a 4 hole mounting flange and Replaces: AF656R, AR20668R. (Item #: 111437, Ref: AF656R) $134.00

Air Cleaner Stack - For models 630, 730 that use stack with pre-cleaner. Used with AF3580R pre-cleaner. Replaces AR20669R (Item #: 182847, Ref: AF20669R) $85.01

Air Precleaner Assembly - For 520, 530, 620, 630, 720, 730. Air Precleaner Assembly. 7 Inch Diameter, 3 inch ID base. (3817R) (Item #: 109938, Ref: AF3580R) $103.00

Air Stack Muffler Spacer Block - For 620, 630, 720, 730. (Item #: 179448, Ref: R21057R) $52.00

Carburetor Bowl - Fits double barrel DLTX model Marvel Schebler carburetors DLTX101, DLTX102, DLTX105, DLTX106, DLTX75, DLTX81, DLTX82, DLTX83, DLTX84, DLTX85, DLTX86, DLTX94, DLTX95, DLTX96, DLTX97, DLTX98, DLTX99. For tractor models 50, 60, 70, 520, 530, 620, 630, 720, 730. Replaces 65-703, A5173R, AR10074R (Item #: 110992, Ref: A5173R) $66.00

Carburetor Float - For tractor models 50, 60, 70, 520, 530, 620, 720, 530, 630, 730. Carburetor Float. Replaces: AA4353R, AA5656R, AA6632R, AA6633R, AB4636R, AB4794R, AB5150R, AB5151R, AF1561R, AF1632R, AF2826R, AF2827R, AR10069R, 30-713. Used on the following carburetors: DLTS75, DLTX101, DLTX102, DLTX105, DLTX106, DLTX109U, DLTX81, DLTX82, DLTX83, DLTX84, DLTX85, DLTX86, DLTX94, DLTX95, DLTX96, DLTX97, DLTX98, DLTX99. Measures 66.3mm Long x 27mm Wide x 30mm Thick. (Item #: 108452, Ref: AR10069) $28.42

$John Deere 630 Carburetor Gasket - 4-3\8 inch Center$
Carburetor Gasket - 4-3/8" Center - For John Deere tractor models 50, 60, 70, 520, 530, 620, 630, 720, 730, Replaces John Deere OEM number A4631R, (Item #: 112218) $2.10

$John Deere 630 Carburetor Gasket - 4-5\8 inch Center$
Carburetor Gasket - 4-5/8" Center - For John Deere tractor models 50, 60, 70, 520, 530, 620, 630, 720, 730, Replaces John Deere OEM number A4634R, (Item #: 112219) $2.10

Carburetor Gasket Set - This Carburetor Gasket Set is used on Marvel Schebler Carburetors: DLTX75, DLTX81, DLTX82, DLTX83, DLTX84, DLTX85, DLTX86, DLTX94, DLTX95, DLTX96, DLTX97, DLTX98, DLTX99, DLTX101, DLTX102, DLTX105, DLTX106, DLTX109U (Item #: 182522, Ref: R2119) $9.00

Carburetor Kit, Basic - Kit for Marvel DLTX75, DLTX83, DLTX86, DLTX96, DLTX105, DLTX99, DLTX81, DLTX84, DLTX82, DLTX102, DLTX97, DLTX94, DLTX106, DLTX85, DLTX101, DLTX98, DLTX95 carbs used on 50, 520, 530, 60, 620, 630, 70, 720, 730. (Item #: 100737, Ref: MS105) $20.20

Carburetor Kit, Comprehensive - This Comprehensive Carburetor Kit is used on Marvel Schebler Carburetor DLTX106. It contains all the parts shown. Verify carburetor number before ordering. (Item #: 185365, Ref: R8212) $195.00

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: DLTX81, DLTX84, DLTX109u. 1/8 inch fuel inlet. For the following tractor models: 60, 620, 630. Add $150.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203284, Ref: 1520-CARB) $810.01

Carburetor Repair Kit - Basic carburetor repair kit~ contains needle float valve, throttle shaft, float lever shaft and gasket set. Comes with VITON needle float valve. Carburetor manufacture numbers: DLTX81, DLTX82, DLTX84, DLTX85 and AA5344R, For 60, 620, 630, 70, 720, 730 (Item #: 121236, Ref: BK35V) $34.20

Choke Knob - For tractor models A, B, D, G, H, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 820, 830. (Item #: 109932, Ref: B1951R) $11.00

Donaldson Style Pre - For John Deere tractor models 520, 530, 620, 630, 720, 730, Painted Green, For 3" O.D. Pipe, Comes Without Screen, (Item #: 109937) $82.00

Fuel Cap with Red Rubber Cover - For John Deere tractor models 50 (sn:5018450-later), 50, 60 (sn:635350-later), 60, 70, 320, 330, 420, 430, 435, 520, 530, 620, 630, 720, 730, 830, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020 (sn:122999-earlier), 3020, 4000, 4010, 4020 (sn:200999-earlier), 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4400, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, Compatible with John Deere Construction and industrial models 400, 440 (Crawler), 440, 480 (Loader/Backhoe), Replaces John Deere OEM number R27183, AT20911, Includes red rubber cover and gasket, Red rubber cover outer diameter: 4.040", 1.775" tang-to-tang length, 0.250" tang width, 1.455" inside center diameter, Cap is 1.375" tall, For replacement cover use Item #: 126626, (Item #: 126517) $26.60

Fuel Filler Grommet - 2-1/2" I.D., 4-1/2 O.D.. For tractor models early 50, 60, 70 and 60, 620, 630 orchard models. (Item #: 126663, Ref: A5137R) $26.44

Fuel Filter Repair Kit - For John Deere tractor models A (s/n 584000-later, automatic shut off), 50 (s/n 5016133-later, automatic shut off), 60 (s/n 6028469-later, automatic shut off), 70 (s/n 7006494-later, automatic shut off), 80 (diesel with Pony start), 520 (automatic shut off), 530 (automatic shut off), 620 (automatic shut off), 630 (automatic shut off), 720 (gas / diesel), 730 (gas / diesel), 820 (diesel with Pony start), 830 (diesel with Pony start), 840 (diesel with Pony start), Replaces John Deere OEM number A4978R, A4983R, AA4297R, C1778R, Contains: Diaphragms, washer, screen, gasket, (Item #: 127447) $22.20

Fuel Strainer - For John Deere tractor models 50, 60, 70, 520, 530, 620, 630, 720, 730, Replaces John Deere OEM number R10159, (Item #: 150408) $53.00

Grommet, Fuel Filler, Black - For tractor models 70, 620, 630, 720, 730, 1020, 1520, 2020, 3010, 3020, 4010, 4020, 5010. Measures 3 7/8 inch outside diameter, 2 1/4 inch inside diameter, and 3 1/2 inch diameter on underside lip. (Item #: 109934, Ref: A5157R) $12.30

Needle Valve - Viton Float Valve Needle, Seat and Gasket Assembly for some Marvel Schebler carburetors. For the following models: M, MC, MT, 320, 330, 40, 420, 430, 50, 520, 530, 60, 620, 630, 70, 720, 730, 2010. Replaces 233-543. (Item #: 179751, Ref: C3NN9D532A) $7.00

Precleaner Cover, Metal - 7" diameter with brass nut, fits Donaldson pre-cleaners. For tractor models Some 60, 70, 520, 530, 620, 630, 720, 730, (820, 830 3-cyl), (1010, 2020, 2520 diesel), 2010, 2030, 2040, 2150, 2155, 2240, 2255, 2355, 2440, 2510, 2630, 2640, 2840, 3010, 3020, 4000, 4010, (4020 gas or LP). (Item #: 168690, Ref: AF3583R) $28.00

Red Rubber Cover Only - For John Deere tractor models 50 (s/n 5018450-later), 60 (s/n 635350-later), 70 (gas), 320, 330, 420, 430, 435, 480, 520, 530, 620, 630, 720, 730, 820 (3 Cylinder), 830 (3 Cylinder), 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020 (s/n 122999-earlier), 4000, 4010, 4020 (s/n 200999-earlier), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4400, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 5010, Replaces John Deere OEM number R27183, For fuel cap with cover use Item #: 126517, (Item #: 126626) $18.00

Sediment Bowl Assembly - With Automatic shut-off. For tractor models (50 gas from SN# 5016133 and up), (A gas from SN# 584000 and up), (60 gas from SN# 6028469 and up), 520, 530, 620, 630, (70 gas from SN# 7006494 and up). (Item #: 163282, Ref: AA5777R) $140.00

Sediment Bowl Assembly Glass Bowl - Glass bowl with an outside diameter is 2 1/8 and an overall height of 2 3/8. For the following models using a 2 3/8 inch tall glass bowl: A, AI, AO, AR, B, BO, BR, D, G, GP, GPO, H, 50, 520, 530, 60, 620, 630, 70, 720, 730, 2010, 4030, 4230. Replaces C1777R. (Item #: 105365, Ref: S.65504) $5.50

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: L885T (Item #: 105364, Ref: 49923D) $3.50

Sediment Bowl Screen - 2" - For John Deere tractor models A (Styled and Unstyled), AI (Unstyled), ANH (Styled and Unstyled), AW (Styled and Unstyled), B (Styled and Unstyled), BN (Styled and Unstyled), BNH (Styled and Unstyled), BO (Unstyled), BR (Unstyled), BW (Styled and Unstyled), BWH (Styled and Unstyled), D (Styled and Unstyled), G (Styled and Unstyled), GH (Styled and Unstyled), GM (Styled), GN (Styled and Unstyled), H (Styled), HNH (Styled), HWH (Styled), 50 (Automatic Shut Off), 60 (Automatic Shut Off), 70, 80 (Pony Start Diesel), 520 (Automatic Shut Off), 530 (Automatic Shut Off), 620 (Automatic Shut Off), 630 (Automatic Shut Off), 720, 730, 820 (Pony Start Diesel), 830 (Pony Start Diesel), 840 (Pony Start Diesel), Compatible with John Deere Combine (s) 55, Replaces John Deere OEM number AA519R, (Item #: 121909) $5.90

No
Picture
Speed Control Plate - With linings. For tractor models (520 from SN# 5208100 and up), (620 from SN# 6213100 and up), (720 from SN# 7214900 and up), 530, 630, 730. Replaces RE227867. (Item #: 121857, Ref: AF3847R) $37.10

Speed Control Rod End Joint - Fits John Deere- [2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 5010, 5020, 5200, 5400, 5440 (as a throttle speed control end joint; gas, lp, diesel)], 4230 (as a throttle speed control end joint; gas only), [50, 520, 530, 60, 620, 630, 70, 720, 730 (as a throttle speed control end joint; gas, lp, all fuel)], [5325N, 5425N, 5525N (as a PTO linkage end)], European: 5420 (as a throttle speed control end joint; gas, lp, diesel), Industrial 990 (as a throttle speed control end joint; gas, lp, diesel), 844 (as a throttle speed control end joint; gas, lp, diesel), [760, 760A, 762A, 860B, 862 (as a throttle speed control end joint; gas, lp, diesel)], [340D, 440C, 440D, 448D, 540B, 540D, 548D, 640, 640D, 648D, 740, 740A (as a throttle speed control end joint; gas, lp, diesel)], [500, 500A, 500B, 600, 700A (as a throttle speed control end joint; gas, lp, diesel)]; Replaces: AA5302R (Item #: 178588, Ref: AA5302R) $17.40

Vent Tube and Radiator Overflow Packing - This packing installs in the nut that is on either end of your vent tube or one end of your radiator overflow tube. It is used on John Deere A, B, D, G, 50, 520, 530, 60, 620, 630, 70, 720, 730, 80, 820, 830. Replaces John Deere Part Number B60R (Item #: 183845, Ref: B60R) $6.90

Gauges

Amp Gauge - For tractor models A, AO, AR, B, BO, BR, LA, LI, GN, GW, 50, 60, 70, 80, 320, 33, 520, 620, 630, 720, 730, 820, 830. This gauge has a plain face without a John Deere logo. This 20-0-20 ammeter has a metal base, glass lens, black faceplate and a black bezel. Replaces AM1864T, AF2749R. (Item #: 150259, Ref: R3803) $29.40

Fuel Gauge 12 Volt - For John Deere tractor models 520, 530, 620, 630, 720, 730, 820, 830, Replaces John Deere OEM number AF2739R, AF2170R, Plug Style, 12 Volt, (Item #: 160361) $30.00

Fuel Gauge, 12 Volt - This electric fuel gauge fits 2 Cylinder models; 520, 530, 620, 630, (720, 730 Gas), (720, 730 Diesel (12/24 volt electric start), (820 2 cylinder, 830 2 cylinder 12/24 volt electric start). This fuel gauge is calibrated to the original resistance, 0 - 30 OHMs, positive ground system. Replaces: AF2721R (Item #: 121633, Ref: AF2721R) $41.00

Fuel Gauge, 12-Volt Negative Ground - This electric fuel gauge fits 2 Cylinder models; 520, 530, 620, 630, (720, 730 Gas), (720, 730 Diesel (12/24 volt electric start), (820 2 cylinder, 830 2 cylinder 12/24 volt electric start). This fuel gauge is calibrated to the original resistance, 0 - 30 OHMs, Negative ground system. Replaces: AF2721R that has been changed to Negative Ground. (Item #: 140602, Ref: JDS3476) $25.00

Fuel Sending Unit - This fuel sending unit is used on the following 2 cylinder tractors: 520, 530, [620, 630 (General Purpose, Standard or Orchard.)], [70, 720, 730 (Gas, LP, and Diesel)], 80, 820, 830, 840. It will work for 6 or 12 volt, positive or negative ground providing the appropriate gauge is used. This fuel sending unit is properly calibrated to the original resistance, 0 to 30 OHMs. It replaces original part numbers AB5139R, AF2173R, AR1112R (Item #: 159048, Ref: AR1112R) $54.00

Oil Gauge Adapter Fitting - This Oil Gauge Adapter Fitting is 1/8 inch NPT female to 3/16 inch tubing female. It is used on some gauges without removable fitting. (Item #: 178157, Ref: 9N18685) $5.20

Oil Pressure Gauge - For tractor models: 50, 60, 70, 520, 530, 620, 630, 720, 730, all gas engines. Oil Pressure Gauge Black Face. Does NOT have "John Deere" on the face. Comes with studs. This oil pressure gauge has a metal base, glass lens and a black bezel. This is a dash mounted gauge and includes the studs and mounting bracket. This is a mechanical gauge. The measurement of the threaded fitting is 1/8 NPT. Replaces OEM #s AF2775R and AF2752R. (Item #: 150253, Ref: AF2752R) $27.50

Tachometer - This new tachometer fits; A serial number 648000 and up, AO and AR serial number 272000 and up, B serial number 201000 and up, [ 50, 520, 530, 60, 620, 630, 70, 720, 730 (Gas/Lp) ], [ 70, 720, 730 (Diesel) ], [ 80, 820 2 cylinder, 830 2 cylinder, 840 2 cylinder (Serviceable, Face plate will have the wrong Mph.) ]; Replaces: AB5132R, AB5134R, AF1719R, AF2066R, AF2698R, AR20055R, AR20825, AR20836, AR21661, AR21662, AR21663, AR21663R, AR21664R (Item #: 150247, Ref: R4611) $113.00

Tachometer Cable - For model 630. Replaces AR21234R. (Item #: 121345, Ref: AR21233R) $40.60

Temperature Gauge Black Face - For John Deere tractor models A (styled), D (styled), G (styled), M (mid 1952-later), R (mid 1952-later), 40 (1952-later), 50, 60, 70, 80, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 820, 830, 840, Replaces John Deere OEM number AM3950T, AA6295R, AA7263R, AF2192R, AF2774R, AM2444T, AM3092T, AR20783, AT13849T, Black Bezel, Black Face, Lead Length: 48", For temperature gauge with a white face use 150249, (Item #: 150248) $30.80

Water Temperature Gauge - Black face. 72 inch lead. Without John Deere Logo. 140-230. For tractor models A, AR, B, D, G, M, R, 40, 50, 60, 70, 80, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 820, 830, 840. Also replaces AA6295R, AA7263R, AM2444T, AT13849T, AR20783R. (Item #: 150251, Ref: AR490R) $32.00

Water Temperature Gauge - For 50, 60, 70, 520, 530, 620, 630, 720, 730. Water Temperature Gauge without John Deere logo on black face. Comes with 36" lead. (Item #: 150252, Ref: R3813) $31.50

Water Temperature Gauge - This temperature gauge is for models 50, 60, 70, 520, 530, 620, 630, 720, 730. This gauge has a plain face without a John Deere logo. This water temperature gauge has a metal base, glass lens and a black bezel. This gauge has a 6 foot capillary lead. Please measure the length required for your tractor before ordering. The measurements are: 5/8 inch 18 NF end with a 1/2 inch NPT pipe bushing. Replaces OEM #s: AR490R, AT13849T, AR20783R, AM2444T, AA7263R, AA6295R, R3814. (Item #: 150251, Ref: AR490R) $32.00

Hitch / Drawbar

3 Point Adjustable Upright Assembly - For tractor models 520, 530, 620, 630, 720, 730 except Hi-Crop. Replaces AF2676R (handle), AF2706R, AF2707R, B2804R, DA5883A, F2670R, F2671R, F2673R, F2674R, F2675R, F2676R, F2679R, JD7759, 11H218, 12H303, 14H785, 16H1419 (rivet/pin), 19H1901, 34H78, 34H118, 34H152. (Item #: 126545, Ref: AF2704R) $267.00

No
Picture
Adapter - Adaptor Pin and Bushing, adapts top link TP-AR34208 to tractors: 520, 530, 620, 630, 720, 730, 3010, 4010. Pin 4" usable length, 3/4" diameter, bushing .90" outer diameter, .765", inner diameter 1.750" long. For 3010, 4010, 520, 530, 620, 630, 720, 730. (Item #: 112555, Ref: TP-AR34208AK) $14.28

Bottom Yoke - For John Deere tractor models 520, 530, 620, 630, 720, 730 (Except Hi-Crop), Replaces John Deere OEM number F2670R, (Item #: 125731) $144.00

Center Link Assembly - For 520, 530, 620, 630, 720, 730. Center Link Assembly. Assembly consists of one of each of the following items: AF2873R, AR21917R, AF2798R and AF2799R. (Item #: 102073, Ref: AF520TL) $285.01

No
Picture
Center Link Body with Handle - For tractor models 520, 530, 620, 630, 720, 730. Center Link Body with Handle. (Item #: 170522, Ref: AF2873R) $149.00

Center Link End - For John Deere tractor models 520, 530, 620, 630, 720, 730, Replaces John Deere OEM number AF2798R, 1-1/4" x 7 Left Hand Thread, (Item #: 170268) $101.00

Center Link End, Hook - For tractor models 520, 530, 620, 630, 720, 730. Center Link End - Hook. (Item #: 179951, Ref: AR21917R) $178.00

Drag Link Sleeve - For 60, 70, 620, 630, 720, 730 with Adjustable Round Front Axle. OEM# C838R, C840R, AF1187R (Item #: 179447, Ref: R3851) $104.00

Drawbar Pivot Pin - For tractor models (620 from SN# 13100 and above), (G from SN# 18700 and above), 630, 70, 720, 730. Replaces F856R, AF1318R. (Item #: 126344, Ref: AF3759R) $31.30

Leveling Screw - For John Deere tractor models 520, 530, 620, 630, 720, 730 (Except Hi-Crop), Replaces John Deere OEM number AF2707R, AF2706R, (Item #: 126540) $96.00

No
Picture
Leveling Screw - This Right Hand Leveling Screw measures 19.44 inches in length, 1.125 inches diameter and 7 UNC right hand threads. For 520, 530, 620, 630, 720, 730 All Models Except Hi-Crop (Item #: AF2706R) $104.66

No
Picture
Leveling Screw - Left Hand For 520, 530, 620, 630, 720, 730 All Models Except Hi-Crop (Item #: R2018) $57.13

No
Picture
Leveling Screw Yoke - For tractor models 520, 530, 620, 630, 720, 730 all NON high crop models. (Item #: 126541, Ref: AF2670R) $204.00

Lift Link Handle - For John Deere tractor models 520, 530, 620, 630, 720, 730 (except Hi-Crop), Replaces AF2676R [handle] and 16H1419 [rivet/ pin], (Item #: 110286) $17.60

Lower Lift Arm - 3 Point, without Repair End - Left Hand - For John Deere tractor models 520, 530, 620, 630, 720, 730, Replaces John Deere OEM number AF2715R, AF2716R, Left hand side, Does not include Repair End, For Right Hand Lower Lift Arm use Item #: 171092, (Item #: 171093) $351.00

Lower Lift Arm - 3 Point, without Repair End - RH - For John Deere tractor models 520, 530, 620, 630, 720, 730, Replaces John Deere OEM number AF2714R, AF2716R, Right hand side, Does not include Repair End, For LH Lower Lift Arm use Item #: 171093, (Item #: 171092) $543.12

No
Picture
Lower Lift Arm - 3 Point with Repair End, Left Hand - For John Deere tractor models 520, 530, 620, 630, 720, 730, Replaces John Deere OEM number AF2715R, AF2716R, Left hand Side, Includes Repair End, For Right Hand Lower Lift Arm use Item #: 125688, Additional Handling and Oversize Fees Apply To This Item, (Item #: 125687) $357.08

No
Picture
Lower Lift Arm - 3 Point with Repair End, Right Hand - For John Deere tractor models 520, 530, 620, 630, 720, 730, Replaces John Deere OEM number AF2714R, AF2716R, Right hand Side, Includes Repair End, For Left Hand Front Pull Arm use Item #: 125687, Additional Handling and Oversize Fees Apply To This Item, (Item #: 125688) $386.00

$John Deere 630 Pull Arm, Rear - Right Hand\Left Hand$
Pull Arm, Rear - Right Hand/Left Hand - For John Deere tractor models 520, 530, 620, 630, 720, 730, Replaces John Deere OEM number AF2716R, Fits left or right hand side, (Item #: 160665) $81.00

Rockshaft Return Link - For tractor models 620, 630 both row crops. (Item #: 109433, Ref: A5606R) $38.58

No
Picture
Rockshaft Return Spring - For tractor models 520, 530, 620, 630, 720, 730. (Item #: 109647, Ref: F2897R) $62.72

No
Picture
Sway Block Kit - Contains: 2 Sway Blocks, 4 Spacers, and Square Headed Hardware For 520, 530, 620, 630, 720, 730 (Item #: 178552, Ref: R2094) $152.00

No
Picture
Sway Block, LH - For tractor models 520, 530, 620, 630, 720, 730. (Item #: 108930, Ref: R2096) $52.00

No
Picture
Sway Block, RH - For tractor models 520, 530, 620, 630, 720, 730. (Item #: 108916, Ref: R2095) $48.24

Top Link, Cat I - For tractor models 520, 530, 620, 630, 720, 730. Replaces AF2873R, AR21917R, AF2799R. (Item #: 102073, Ref: AF2798R) $285.01

Top Link Chain - For John Deere tractor models 520, 530, 620, 630, 720, 730, Replaces John Deere OEM number F2825R, F2827R, F2849R, (Item #: 156783) $15.10

No
Picture
Upper Yoke - For John Deere tractor models 520, 530, 620, 630, 720, 730 (Except Hi Crop), Replaces John Deere OEM number 12H303, 14H785, 19H1901, 34H331, 34H369, B2804R, DA5883A, F2671R, F2673R, F2674R, F2675R, JD7759, (Item #: 172726) $61.00

Hydraulic System

Hydraulic Lever Grip - For tractor models 80, 520, 530, 620, 630, 720, 730, 820, 830, 840. (Item #: 121739, Ref: F2948R) $11.20

Lights

Bulb, Sealed Beam, Flood - 12-Volt Hi-Beam with Double Contact. It is 35 Watt with a 4.4 Inch Outside Diameter. It is Interchangeable with original lamp 4406 and 4410. Check lamp number before ordering. Replaces: AR21059 (Item #: 111242, Ref: 28A116) $12.90

No
Picture
Dash Light, 12 Volt - For tractor models 40, (50 from SN# 5016123), (60 all Orchard/Standard and Row Crop from SN# 6028350 and up), (70 from SN# 7006328 and up), 330, 420, 430, 435, 440, (530, 630, 730 lower dash lamp). Replaces AM1879T. (Item #: 109930, Ref: AR20432R) $35.30

No
Picture
Dash Light, 6 Volt - For tractor models 40, (50 from SN# 5016123), (60 all Orchard/Standard and Row Crop from SN# 6028350 and up), (70 from SN# 7006328 and up), 330, 420, 430, 435, 440, (530, 630, 730 lower dash lamp). Replaces AR20432R. (Item #: 179489, Ref: AM1879T) $34.10

Fender Headlight, 12 Volt - Used with flat top fenders. For tractor models 520, 530, 620, 630, 720, 730. (Item #: 125671, Ref: R4786) $60.00

Fender Headlight, 6 Volt - Use on flat top fenders. For tractor models 520, 530, 620, 630, 720, 730. (Item #: 125714, Ref: R4785) $70.00

Headlight Reflector - Item is interchangeable with your original and measures 4-1/2 inch measure directly across the top of the housing. For the following tractors: ( A, B with sheet metal dash), 70 gas and diesel, 730 gas and diesel, D up to serial number 143800, 720 gas and diesel, 50, 60, 630, AO, AR, H, R, 80, 520, 530, 620, 720, (820, 830 2 cylinder). Replaces 53523D, AA3238R. (Item #: 112482, Ref: AA3238R) $12.10

Headlight Washer - Used with light part number 164089AS. For the following tractors: A, B, G, 50, 60, 70, 630, 730, 4020, R, 80, 520, 530, 620, 720, 820, 830, 1020, 1520, 1530, 2010, 2020, 2030, 2510, 2520, 2630, 3010, 3020, 4000, 4010, 4320, 4520, 4620, 5010, 5020, 6030, 2040, 2240, 2350, 2355, 2440, 2550, 2555, 2640, 2750, 2755, 2840, 2940, 2950 (Item #: 154899, Ref: 504781M1) $5.30

No
Picture
LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED) $35.00

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, AF3892R, AT11898. (Item #: 111241, Ref: 373662R91) $9.10

Light Ring - The dimensions of this light ring with screw are 4.5 inches in height and 0.885 inches in width. Replaces 10P1552, 230233, 371445R91, 371449R91, 371451R91, 70230233, AF3891R, B50255, B50258, JDS676. Verify measurements before ordering. Most models used more than one headlight style in production. (Item #: 154743, Ref: 371449R91) $25.70

No
Picture
Rear Combo Light - For 50, 520, 530, 60, 620, 630, 70, 720, 730 - ALL GAS. 70, 720, 730, 820, 830 - ALL DIESEL WITH ELECTRIC START. 12V Rear Combo Light, 5". (3869R) (Item #: 105347, Ref: AA5199R) $66.00

Miscellaneous

Gear Shift Ball - For John Deere tractor models A (s/n 499000-later), B (s/n 150000-later), H (s/n 10000-later), 50, 60 (s/n 604300-later), 520, 530, 620, 630, 720, 730, Replaces John Deere OEM number H717R, (Item #: 126524) $25.50

Power-trol Pump Idler Gear Shaft, Used - For John Deere tractor models A (s/n 477000-later "AR"-"AO" s/n 272000-later), 50, 60, 70, 520, 530, 620, 630, 720, 730, Replaces John Deere OEM nos A4476R, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498940) $35.01

Power-trol Pump Idler Gear, Used - For John Deere tractor models A (s/n 477000-later "AR"-"AO" s/n 272000-later), 50, 60, 70, 520, 530, 620, 630, 720, 730, Replaces John Deere OEM nos AA5192R, Includes Bushings, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498941) $234.01

Umbrella Bracket Assembly - For tractor models with Battery Box Mounted Seats: 50, A, 60, B, G, 520, 530, 620, 630, 70, 720, 730, 80, 820 2 cylinder, 830 2 cylinder, R. (Item #: 179139, Ref: AA4206R) $87.00

Oil System

Engine Oil Pump Strainer - Used on John Deere models: A Serial Number 584000 and up, B Serial Number 201000 and up, 50, 60, 70 gas/LP, 630, 730 gas/LP, 520, 530, 620, 720 gas/LP. (Item #: 164417, Ref: AB3450R) $49.50

Oil Filter - Oil filter element, cartridge type 6-7/16" Tall, 3-1/8" Wide. Does not come with seal or gasket. For tractors: A, B, D Serial number 146500 and up, G, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 3010, 3020, 4000, 4010, 4020, 4030. Replaces AA3680R, AR21777R, AR26350, AR28110R (Item #: 109417, Ref: AR26350) $10.60

Oil Pump Drive Shaft Coupling - For tractor models A series after sn 424025, B series, G series, 50, 60, 70 gas, 520, 530, 620, 630, 720 gas, 730 gas. (Item #: 182803, Ref: B250R) $34.10

Paint

No
Picture
Paint, Classic Green, 1 Gallon - Green Paint for 2 cylinders include models A, AO, AR, B, BO, BR, C, D, GP, P, G, L, LA, H, M, MT, MC, Y, 62, R, 40, 50, 60, 70, 80, 320, 420, 520, 620, 720, 820, 330, 430, 530, 630, 730, 830, 435, 440, 840. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102408, Ref: TP215GAL) $56.00

No
Picture
Paint, Classic Green, 1 Quart - Green Paint for 2 cylinders include models A, AO, AR, B, BO, BR, C, D, GP, P, G, L, LA, H, M, MT, MC, Y, 62, R, 40, 50, 60, 70, 80, 320, 420, 520, 620, 720, 820, 330, 430, 530, 630, 730, 830, 435, 440, 840. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102407, Ref: TP215QT) $24.00

No
Picture
Paint, Classic Green, Spray Can - Green Paint for 2 cylinders include models A, AO, AR, B, BO, BR, C, D, GP, P, G, L, LA, H, M, MT, MC, Y, 62, R, 40, 50, 60, 70, 80, 320, 420, 520, 620, 720, 820, 330, 430, 530, 630, 730, 830, 435, 440, 840. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108347, Ref: TP215SP) $10.50

PTO / Driveline

No
Picture
Brake Plate, (PTO) - With facing. For tractor models 80, 620, 630, 720, 730, 820, 830. Replaces RE20727. (Item #: 125610, Ref: AF2768R) $39.80

Clutch Disc, (PTO) - With Facing. For tractor models 50 serial number 5032350 and up, 60 serial number 6060700 and up, 70 serial number 7039400 and up, 80, 520, 530, 620, 630, 720, 730, 820, 830. Replaces RE29784. (Item #: 114821, Ref: AR1294R) $26.10

Clutch Disc, (PTO) - For tractor models (50 SN# 5032350 and up), 520, 530, (60 SN# 6060700 and up), 620, 630, (70 SN# 7039400 and up), 720, 730, 80, 820, 830. (Item #: 114821, Ref: RE29784) $26.10

Clutch Drive Disc (PTO) - 3.375" I.D., 5.625" O.D., .06" thickness, 6 tangs. For tractor models 50, 60, 70, 520, 530, 620, 630, 720, 730. Price is for each, you may need more than one depending on your application. (Item #: 114822, Ref: A5145R) $12.90

No
Picture
Clutch Plate (PTO) - With facing. For tractor models 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830. Also replaces RE29784. Price is for each, you may need more than one depending on your application. (Item #: 114821, Ref: AR1293R) $26.10

Clutch Plate, (PTO) - 1.40" I.D., 5.00" O.D. .290" thickness. For tractor models 50 SN# 5032350 and up, 520, 530, 60 SN# 6060700 and up, 620, 630, 70 SN# 7039400 and up, 720, 730, 80, 820, 830. (Item #: 110325, Ref: RE29794) $39.10

PTO 3 Bolt Bearing Cover Gasket - For John Deere tractor models 70 (gas/diesel s/n 7014800-later with engine driven PTO), 520, 530, 620, 630, Replaces John Deere OEM number F1542R, For PTO Clutch Shaft, (Item #: 125606) $15.20

PTO Clutch Drum Inner Seal - This PTO Clutch Drum Inner Seal measures 1.125 inch inside diameter, 1.565 inch outside diameter, 0.250 inch wide. [50, 60, 70 (PTO Clutch Drum Inner Seal on following (Rowcrop, Orchard, HiCrop and Standard) with Engine driven live PTO) ], [ 520, 530, 620, 630, 720, 730 (PTO Clutch Drum Inner Seal on following (Rowcrop, Orchard, HiCrop and Standard) with Engine driven live PTO. Also used For Dual power control valve control arm seal.) ], [ 820 2 cylinder, 830 2 cylinder, 840 2 cylinder (Used For Dual power control valve control arm seal.)]; Replaces: AA5247R, AR1355R, AT11492, RE14867. (Item #: 165141, Ref: 195501M1) $4.70

No
Picture
PTO Flipper Guard - For tractor models (50, 60, 70 with Live PTO/Live Hydraulics), 520, 530, 620, 630, 720, 730. (Item #: 109575, Ref: AA5288R) $38.50

PTO Flipper Guard Spring - For tractor models (A from SN# 523600) and up, (B from SN# 149700), (G from SN# 43352), 50, 60, 70, 520, 530, 620, 630, 720, 730. (Item #: 115822, Ref: F711R) $8.40

PTO Oil Seal - Fits John Deere - [A, AH, AN, ANH, AW, AWH (Used as a rear PTO oil seal (serial number 488000-UP)], [AO, AR (Used as a rear PTO oil seal serial number 260000 and up)], [B, BN, BNH, BW, BW40, BWH, BWH40 (Used as a rear PTO oil seal serial number 149700 and up)], [BO, BR (Used as a rear PTO oil seal serial number 333100 and up)], [G, GH, GM, GN, GW (Used as a rear PTO oil seal serial number 43352 and up)], [R, 50, 520, 530, 60, 620, 630, 70, 70D, 720, 720D, 730, 730D (used as a rear PTO oil seal)], 2010 (used as a transmission drive shaft seal), [3010, 4010 (Used as a front PTO oil seal)]; Replaces: AA2296R, AT11888, AT11931, AT16076. (Item #: 152182, Ref: 71701C1) $10.50

PTO Oil Seal Housing Shim - For John Deere tractor models 60 (2 used on following with engine driven PTO, s/n 6025404-later), 70, 520, 530 (2 Used on models with engine driven PTO), 620, 630, 720, 730 (2 used on Rowcrop), Replaces John Deere OEM number F1461R, Steel, 23 Gauge, 0.018" Thick, (Item #: 125629) $9.20

PTO Shield - For 520, 530, 620, 630, 720, 730. PTO Shield replaces AR20482R. (Item #: 110903, Ref: R4406) $85.00

No
Picture
PTO Shield Casting - For 520, 530, 620, 630, 720, 730. PTO Shield Casting replaces #AF2687R. (Item #: 110904, Ref: R4407) $116.00

Seats

Arm Rests - Pair - Black Vinyl on Steel with Metal Frame Clip For A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830 (Item #: 178435, Ref: R1190) $103.00

Arm Rests, Pair - Yellow Vinyl on Steel with Metal Frame Clip For A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830 (Item #: 110196, Ref: R1188) $105.00

Seat Adjustment Handle - For the following John Deere models with Float Ride seat: 50, 520, 530, 620, 630, 720, 730, 80, 820 (2 cylinder), 830 (2 cylinder), 840 (2 cylinder with serial number 8400200 and up). Replaces AF3427R. (Item #: 105324, Ref: 1016119M91) $28.70

Seat Back - Yellow, wood back. 6 inches high. For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830. Picture shows seat bottom. Not included in price. Order P/N R0172 if needed. (Item #: 110194, Ref: R0173) $71.00

No
Picture
Seat Back - Yellow, wood, 9 inches high. For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830 (Item #: 179186, Ref: R0993) $58.15

Seat Back - Black, wood, 6 inches high. For tractor models A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830. 16.5 inch bolt spacing. (Item #: 116170, Ref: 363219R91-1) $36.60

Seat Bottom - Yellow, wood back. 191/2" x 14 1/2". For D, G, R, 50, 60, 70 80, 520, 530, 620, 630, 720, 730, 820, 830. For seat back order part R0173. NOTE: If tractor has Float Ride, order p/n 0994RTP bottom instead. Picture shows seat back. Not included in price. Order P/N R0173 if needed. (Item #: 101300, Ref: R0172) $61.00

Seat Bottom - Black, wood, 19 1/2 inches x 14 1/2 inches. For A, B, D, G, R, 50, 60, 80, 70, 520, 530, 620, 630, 720, 730, 820, 830 (Item #: 116729, Ref: R0863) $72.00

Seat Bottom (Float Ride) - Yellow, wood. for 520, 530, 620, 630, 720, 730, 820, 830, 840 all with Float Ride only. This seat cushion measures 20-5/8 Inches by 14-1/2 Inches wide and 5 Inches tall. Order part number JT77Y if you want just a standard seat bottom. Replaces AF3270R (Item #: 101300, Ref: R0994) $61.00

Seat Pin and Bushing Kit - For 520, 530, 620, 630, 720, 730, 820, 830 with Float Ride Seat (Item #: 108832, Ref: R2483) $63.00

Seat Shock Absorber - For 520, 530, 620, 630, 720, 730, 820, 830. Seat shock absorber with bushings for tractor models with Float Ride Seat. Center to center extended is 13 inches, compressed 8 3/4 inches. Replaces AF3426R. (Item #: 109874, Ref: R2481) $45.60

Seat Shock Bushing - This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1 (Item #: 109602, Ref: 72696R1) $2.30

Seat Spring, Rubber - Right Hand For 50, 80, 520, 530, 620, 630, 720, 730, 820, 830 with Float Ride Seat. (Item #: 105349, Ref: AR39648) $45.10

Seat Spring, Rubber - Left Hand For 50, 80, 520, 530, 620, 630, 720, 730, 820, 830 with Float Ride Seat. (Item #: 105350, Ref: AR39649) $41.90

Seat Tie Bar Plate - This Seat Tie Bar Plate is for 520, 530, 620, 630, 720, 730, 820, 830 with Float Ride Seat (Item #: 124287, Ref: R3890) $45.50

Sheet Metal / Body Parts

Battery Box - For tractor models 50, 60, 520, 530, 620, 630. Battery Box. Has PTO bracket unlike original. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104074, Ref: AA7337R) $109.00

Battery Box - For 520, 530, 620, 630. Battery Box Made in USA. Restoration Quality. No PTO bracket like original. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 112132, Ref: AA6731R) $202.32

Deluxe Hardware Kit - Includes hardware for: Hood, Grill, Grill frame (corner), Flywheel cover and Instrument panel. It is used on John Deere 530, 630 and 730 all gas or diesel. Contains John Deere Part numbers: 12H10R, 12H11R, 12H12R, 12H291, 12H291R, 12H303, 14H785R, 14H812R, 19H2020, 24H1009, 24H106R, 24H1309, 24H1330, 24H1366, 24H1372, 24H145A, 24H464E, 24H550R, 24H889R, 28H1497, A350R, A4666R, A4667R, A4668R, A4669R, AR20945, AR20946, B1839R, B2804R, R20817, R20912R (Item #: 179219, Ref: JDS3480) $126.00

Fender - Right hand or left hand, fits either side. Clamshell style fender does NOT come with bracket for the following models: A, B, G, 50, 520, 60, 620, 70, 720 Diesel, 630, 730 Diesel. Fender measures 27 3/4 tall and 33 inches wide at tallest and widest dimensions. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 108307, Ref: AA4655R) $166.00

Fender Bracket - For 530, 630, 730. Replaces R20573. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 109547, Ref: R3150) $146.00

Fender, Economy - Right Hand - For John Deere tractor models 520, 530, 620, 630, 720, 730, Replaces John Deere OEM number AR20869, RE13878, Fits right hand side, Economy version, Includes: No Hand Hold, (2) headlight holes, Uses flat bar bracket supports, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, For Fender, Economy - Left Hand use Item #: 127050, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 108915) $282.00

Fender, Flat Top, LH With Hand Hole - For Row-Crop Models, Left-Hand Fender for: 530, 630, 730, 2010, 2030, 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320, Row Crop Models with Flat Top Fenders. Also replaces AR48873. Rubber Hand Hole Grommets available as number R20759. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103958, Ref: RE13879) $250.00

Fender, Flat Top, RH - Fender right hand, for row crop tractors less cab and sound guard body. Tractors: 530, 630 gp (SN# 6300000 and up), 730G&D GP (SN# 7300000 and up), 2010, 2030, 2155, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320. For tractors with tire sizes 13.6 x 38, 15.5 x 38, 16.9 x 30, 18.4 x 30, 18.4 x 34. Tractors: 2350, 2550, 2750. Replaces AR20869, AR20870, AR48872, AR48873. *Use fender grip R20759. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 103957, Ref: RE13878) $235.00

Fender, Flat-Top, RH without Hand Hole - Right Hand without Hand Hole For 530, 630, 730. Additional $20 shipping due to weight and size. Replaces AR20869R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 127050, Ref: AR20869R) $334.30

Fender, Restoration Quality - Left Hand - For John Deere tractor models 520, 530, 620, 630, 720, 730, 2010, 2030, 2150, 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320, Replaces John Deere OEM number RE13879, AR20870, AR48873, Fits left hand side, Flat Top Fender - Restoration Quality, Includes: Hand Hold, (2) headlight holes, Uses angle iron bracket supports, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, For right hand fender less hand hole use Item #: 127011, Additional Handling and Oversize Fees Apply To This Item, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 126635) $418.00

Fender, RH - For 520, 620, 720, 530, 630, 730. Fender, RH, without Hand Hole. Two Light Holes. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 127050, Ref: AR20869) $334.30

Fender Set, Dual Light Holes - Right Hand and Left Hand - For John Deere tractor models 520, 530, 620, 630, 720, 730, 2010, 2030, 2150, 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320, Replaces John Deere OEM number RE13879, RE13878, AR20870, AR48873, AR48872, Right Hand and Left Hand Set, Economy version, Includes: Hand Hold, (2) headlight holes, Uses flat bar bracket supports, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, For right hand side use Item #: 103958, Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 160455) $400.00

Grill Center Plate - With Clips - 1 1/2 Hole For 60 (From S#54500), 620, 630, 720, 730. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 179272, Ref: R2487) $91.00

Grill Rod - For tractor models 60, 620, 630, 70, 720, 730. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 179520, Ref: A4317R) $14.50

Grill Screen - For tractor models 60, 60 Standard after SN# 6043000, 620, 630, 70, 720, 730. Screen is 21.5 inches High X 14 Inches Wide. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 101930, Ref: A4316R) $54.98

Platform Extension - Left Hand For 60, 620, 630 Standard. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 182196, Ref: R4281) $73.00

Step and Bracket Assembly - For tractor models G, 50, 520, 530, 60, 620, 630, 70, 720, 730, A, B. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104024, Ref: AA6092R) $62.00

Step Pad - For tractor models 1020, 1120, 1520, 1530, 1830, 2010, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 3010, 3020, 4000, 4010, 4020, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4520, 4620, 50, 5010, 5020, 520, 530, 60, 6030, 620, 630, 70, 720, 730, 80, 8020, 820, 830, 8450, 8650, 8850, 920, A, B, G (Item #: 109589, Ref: F3195R) $29.30

Step Pad - For tractor models A, 60, B, 50, G, 520, 530, 620, 630, 70, 720, 730, 80, 820, 830, 2010, 1520, 1530, 2040, 2150, 2155, 2240, 2020, 2510, 2520, 2030, 2440, 3020, 2350, 2355, 2550, 2555, 2750, 2755, 2630, 2640, 4010, 3120, 4020, 2840, 4050, 4000, 4230, 4320, 4520, 4620, 4430, 4240, 4440, 4250, 4255, 5010, 5020, 6030, 8650, 920, 1120, 8850, 2130, 8450, 2120, 1830, 8020. (Item #: 109589, Ref: F3195R) $29.30

Step, Used - For John Deere tractor models 80, 520, 530, 620, 630, 720, 730, 820, 830, 920, 1020, 1120, 1520, 1530, 1830, 2010, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 3010, 3020, 4000, 4010, 4020, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4520, 4620, 5010, 5020, 8020, 8450, 8650, 8850, Replaces John Deere OEM number F3195R, A5223R, Single step only, Does not include bracket or bolts, For a new version of this item use Item #: 109589, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430247) $17.01

Step with Bracket - Fits A, AO, AR, B, BO, BR, G, 50, 60, 70, 520, 530, 620, 630, 720, 730. Replaces OEM# A5234R or F3195R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104024, Ref: R2098) $62.00

Toolbox Cover with Hinge - Grated top. For tractor models 60, 70, 620, 630, 720, 730. (standard models). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces AF1837R, AF3216R (Item #: 180450, Ref: R4774) $115.00

Toolbox Cover with Hinge - Smooth top. For tractor models 60, 70, 620, 630, 720, 730. (standard models). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces AF3216R, AF1837R (Item #: 180244, Ref: R4775) $103.00

Toolbox for 60,620,630 - Fits 60 Regular, 60 Standard (SN# 6042999 and up), 620, 630. Replaces AA522R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 179438, Ref: R3296) $76.30

Toolbox Side - Fender Mount. For tractor models 60, 620, 630, 70, 720, 730 Standard. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 180395, Ref: R4271) $77.00

Steering

Center Pivot Housing with Bushing - For tractor models 50, 520, 530, 60, 620, 630, 70, 720, 730 all with square tube axle only. Center Pivot Housing with Bushing. (Item #: 112102, Ref: AA5765R) $567.00

Draft Link Pivot Pin - For John Deere tractor models 520, 530, 620, 630, Replaces John Deere OEM number A5715R, Yellow zinc. 2 used per tractor, Sold individually, (Item #: 126330) $32.90

Drag Link End Assembly - This Drag Link End Assembly is for 50, 60, 70, 520, 530, 620, 630, 720, 730. OEM# C838R, C840R, H982R (Item #: 178932, Ref: R3849) $69.00

Drag Link Rod - Threaded on one end, 7/8 inch inside diameter, right hand threads. For 60, 70, 620, 630, 720, 730 with Adjustable Round Front Axle. Replaces OEM B2696R. (Item #: 179760, Ref: R3850) $46.60

Front Axle Housing Lock Bolt - For John Deere tractor models A, B, G, 50, 60, 70, 520, 530, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, Compatible with John Deere Harvester (s) 9900, Replaces John Deere OEM number B2694R, Uses 1" NC Nut, (Item #: 108966) $24.40

Inner Tie Rod - For 520, 520, 620, 630, 720, 730. Inner Tie Rod. 16" long, 6 vertical holes. REPLACES: AF3206R (Item #: 104801, Ref: F3624R) $132.00

Outer Tie Rod - For tractor models 520, 620, 630, 720, 730. InnerOuter Tie Rod. 17.75" long, 7 vertical holes. REPLACES: AF3207R (Item #: 104802, Ref: F3625R) $134.00

Pivot Bolster - Replaces AA5765R. For tractor models A, B, G (48-80 inch Tread), 50, 60, 70, 520, 530, 620, 630, 720, 730. (Item #: 112102, Ref: R3060) $567.00

Power Steering Coupler Shaft, Used - For John Deere tractor models 60, 620, 630, Replaces John Deere OEM nos A5200R, Splines: 10, Length: 26 7/16", Fan Drive 1 1/4", Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498510) $176.01

Power Steering Fill Hole Plug - For 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830. Power Steering Fill Hole Plug, Metal. Replaces OEM part numbers F1676R and 22050X. (Item #: 107801, Ref: R2480) $13.30

Power Steering Pump Shaft - For John Deere tractor models 50, 60, 70, 520, 530, 620, 630, 720, 730, Replaces John Deere OEM number F1687R, Length: 10-1/2", Splines: 10, (Item #: 122234) $103.00

Roll O Matic Knuckle, Used - For John Deere tractor models 620, 630, 720, 730, Replaces John Deere OEM nos AR20401R, Replaces John Deere Casting nos R20254, Casting No. R20254, Right Hand, Heavy Duty, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497909) $176.01

Spindle - For John Deere tractor models 60, 70, 620, 630, 720, 730, Replaces John Deere OEM number 3035, Vertical length 11 3/8", Shaft dia. 1-5/8", Spline dia. 1-5/8", Inner brg. dia. 1.625", Outer brg. dia. 1.312", Seal dia. 2", (Item #: 110831) $257.00

Spindle - Spindle, LH/RH, Dimension A-14.375 inch, B-1.5 inch, C-1.625 inch, D-1.312 inch. Fits A, AO, AR, B, G, GH, 50, 520, 530, 60, 620, 630, 70, 720 All with Factory Wide Fronts only. The wheel bearing kit used on this spindle is kit part number WBKJD1. (Item #: 102209, Ref: AA5789R) $305.00

Spindle Bushing - Has an inside diameter of 1.504 inches and an outside diameter of 1.753 inches. Two used per spindle. Price shown is for each, sold only in multiples of 2 items. Used on John Deere AO (with factory wide fronts only), AR (with factory wide fronts only), B (with factory wide fronts only), GH (with factory wide fronts only), 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 50, 520, 530, 60, 620, 630, 70, 720, 730. (Item #: 108046, Ref: A877R) $13.10

Spindle Thrust Washer - This Spindle Trust Washer is used on A (with factory wide fronts only), AO (with factory wide fronts only), AR (with factory wide fronts only), B (with factory wide fronts only), GH (with factory wide fronts only), 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 50 (with factory wide fronts only), 520 (with factory wide fronts only), 530 (with factory wide fronts only), 60 (with factory wide fronts only), 620 (with factory wide fronts only), 630 (with factory wide fronts only), 70 (with factory wide fronts only), 720 (with factory wide fronts only), 730 (with factory wide fronts only). 1.500 inch inside diameter, 2.750 inch outside diameter. Two used per spindle. Sold individually. (Item #: 108047, Ref: A890R) $7.10

Steering Arm - For John Deere tractor models 60, 70, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, Replaces manufacturer number 2381, (Item #: 111425) $113.00

Steering Arm, Center - For John Deere tractor models 520, 620, 630, 720, 730, 2640, Replaces John Deere OEM number F3176R, Center Steering Arm, (Item #: 104964) $99.00

Steering Arm - Left - For tractor models 520, 530, 620, 630, 720, 730. Steering Arm - Left. 1.5" Diameter, 6 Spline. (Item #: 104953, Ref: F3175R) $162.00

Steering Arm - Right - For tractor models 520, 530, 620, 630, 720, 730. Steering Arm - Right. 1.5" Diameter, 6 Spline. (Item #: 104952, Ref: F3174R) $188.00

Steering Wheel - 18" diameter, 7/8" splined hub, American Made Rubber, shiny bake-o-light. For early JD 2 cyl. tractor models 520 SN# 5208100 and up, 530, 620 SN# 6213100 and up, 630, 720 SN# 7214900 and up, 730, 820 SN# 8203100, 830. All with power steering. (Item #: 101446, Ref: AF3856R-R) $68.00

Steering Wheel - For A, B, D, G, R, 50, 60, 70, 80, 520, 620, 630, 720, 730, (820 Diesel (2 CYL) With Power Steering). Steering Wheel 17 5/8" Diameter, 13/16" Keyed Hub. 2447R (Item #: 101444, Ref: AA380R) $46.20

Steering Wheel - This steering wheel is for early JD 2 cyl. tractor models 520, 530, 620, 630, 720, 730, 80, 820, 830 with Power Steering. 18" Diameter, 7/8" Splined Hub, Plastic Covered Foreign made. 2 7/16 cap opening. (Item #: 101446, Ref: AF3856R-P) $68.00

Steering Wheel Cap - This 2 legged deer, correct cap for many covered steering wheels on JD models from 1968-2000. Fits a 2 7/16 inch opening. Replaces AL118173, AL155227, R47998 (Item #: 101453, Ref: AL155227) $52.00

Steering Wheel Cap - For tractor models 320, 330, (420 with slant steering to SN# 139999), 430, 435, (520 from SN# 5208100 with power steering), (530, 630, 730 with power steering), (830 2-cyl with power steering), (620 from SN# 6213100 with power steering), (720 from SN# 7214900 with power steering), (820 2-cyl from SN# 8203100 with power steering). Replaces AL155227, F3629R (Item #: 101452, Ref: R3859) $70.00

Steering Wheel Cap - For 320, 330, 420, 430, 435, 440, 520, 530, 620, 630, 720, 730, 820, 830 without Power Steering. Replaces OEM3630, F3630R (Item #: 101451, Ref: R4266) $57.00

Steering Wheel Nut - This steering wheel nut fits the following tractor models: 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 520, 530, 6030, 620, 630, 7020, 720, 730, 7520, 820, 830, 8430, 8440, 8450, 8630, 8640, 8650, and 8850. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 14H482, 14H798, and 14H904. (Item #: 157780, Ref: 353435X1) $1.00

Tie Rod End (LH) - Short Tie Rod, Dimensions A-3.350 inch B-.687 inch, 18 LH thread. For JD 520, 530, 620, 630, 720, 730 tractors (Item #: 102243, Ref: AR21945) $18.71

Tie Rod Right Hand - Tie rod end, outer, threaded, right handed threads, 3-3/8 to center of post. For adjustable front axles 48 to 80 on tractors 520, 530, 620, 630, 720, 730. Fixed standard axles on tractors, 620, 630, 720, 730~ 820 and 830 except Mannheim. Also used on d For 520, 530, 620, 630, 720, 730, 820, 830 (Item #: 102242, Ref: TP-AR21944) $15.00

Wheels

No
Picture
Bearing Cone - BEARING CONE For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 50, 520, 530, 60, 620, 630, 70, 720, 730, AN, ANH, B, BN, BNH, BO, BR (Item #: 109633, Ref: 2788) $20.10

Bearing Cone - Outer bearing cone. For tractor models 50, 60, 70, 520 with 48-80 adjustable or 38 fixed thread~ 620, 630, 720 and 730 excluding roll-o-matic, 3010 and 3020 with 38 fixed thread, 4010 with 38 fixed thread. For 620, 630, 70, 720, 730 (Item #: 121347, Ref: 2790) $45.76

Bearing Cone - For tractor models 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G. (Item #: 179943, Ref: 3383) $65.00

No
Picture
Bearing Cone - Inner bearing cone. For tractor models B to serial number 259370, BR, BO~ 50 excluding adjustable to serial number 5019164~ 50 Roll-O-Matic. For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 50, 520, 530, 60, 620, 630, 70, 720, 730, AN, ANH, B, BN, BNH, BO, BR (Item #: 109633, Ref: TP-JD7222) $20.10

Bearing Cone - Inner bearing cone. For model applications: A series excluding AN, BW, D, G series~ 50~ 60~ 70. For 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G (Item #: 179943, Ref: TP-JD7224) $65.00

Bearing Cup - For tractor models 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G. (Item #: 179944, Ref: 3320-TIM) $14.90

Bearing Cup - Outer bearing cup. For model applications: A series excluding AN, BW, D, G series~ 50, 60, 70. For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 4520, 4620, 4630, 4640, 4840, 50, 5020, 520, 530, 60, 6030, 620, 630, 70, 720, 730, A, AN, ANH, B, BN, BNH, BO, BR, BW, D, G (Item #: 121350, Ref: TP-JD7266) $19.76

No
Picture
Bearing Cup - BEARING CUP For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 4520, 4620, 4630, 4640, 4840, 50, 5020, 520, 530, 60, 6030, 620, 630, 70, 720, 730, A, AN, ANH, B, BN, BNH (Item #: 118705, Ref: 2720) $16.50

Bearing Cup, Inner - For tractor models A series excluding AN, BW, D, G series~ 50~ 60~ 70, 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G. (Item #: 179944, Ref: TP-JD7270) $14.90

Front Wheel Felt Retainer - The Felt Retainer is used with FW109S wheel bearing kit. 3.160Inch Diameter OD, 3.086 Inch ID, Thru hole 2.06 Inch Diameter, Outer ring Diameter 3.654 Inches, 1.115 Inch Overall height. Measure Before Ordering. For model applications: A series excluding AN, BW, D, G series~ 50 adjustable to serial number 5019164~ 60 series to serial number 6034693~ 70 series excluding standard to serial number 7011652. For 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G. (Item #: 179278, Ref: D635R) $25.20

Front Wheel Hub Cap, Used - For John Deere tractor models A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, 820, 830, 940, 950, 970, 990, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1550, 1630, 1640, 1750, 1830, 1850, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2255, 2350, 2355, 2510, 2520, 2550, 2555, 2650, 2750, 2755, 2840, 2850, 2950, 2955, 3010, 3020, 3030, 3040, 3120, 3130 (after s/n 186270), 3140, 4000 (after s/n 201000), 4010, 4020 (after s/n 201000), 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 5010, 5020, 6030, 6110, 6120, 6200, 6210, 6220, 6300, 6310, 6320, 6400, 6410L, 6410S, 6420, 6500, 6510, 6520, Replaces John Deere OEM number A1555R, 3 bolt cap, Aluminum Cap, For a new version of this item use Item #: 102235, (Item #: 402235) $5.01

Front Wheel Hub Cap, Used - For John Deere tractor models A, B, D, G, R, 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, Replaces John Deere OEM number A1555R, 3 bolt cap, Cast Cap, For a new version of this item use Item #: 102235, (Item #: 496607) $5.01

No
Picture
Retainer - Retainer. For tractor models B to serial number 259370, BR, BO~ 50 excluding adjustable to serial number 5019164~ 50 Roll-O-Matic. For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 50, 520, 530, 60, 620, 630, 70, 720, 730, AN, ANH, B, BN, BNH, BO, BR (Item #: 180109, Ref: TP-B89R) $29.50

Rim Clamp, Used - For John Deere tractor models A (s/n 477000-later), AO (s/n 014800-later), AR (s/n 014800-later), B, BN, BNH, BW, BWH, G, GH, GN, GW, R, 60, 70 (s/n 014800-later), 80, 600, 620, 630, 720, 730, 820, 830, 2010, 3010, 3020, 3030, 3120, 3130, 4000 (s/n 201000-later), 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Combine(s) 55 (s/n 12051-39349), 105, 6602, 6622, Replaces John Deere OEM nos B634R, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497223) $6.01

Rim Clamp, Used - For John Deere tractor models 50, 60, 70, 520, 530, 620, 630, 720, 730, 1020, 1120, 1520, 1630, 1640 (s/n 429999-earlier), 1830, 1840 (s/n 429999-earlier), 2010, 2020, 2030, 2040 (s/n 429999-earlier), 2120, 2130, 2140 (s/n 429999-earlier), 2440, 2510, 2520, 2630, 2640, 3010 (049999-earlier), 3020, 3030, 3040 (s/n 429999-earlier), 3120, 3130, 3140 (s/n 429999-earlier), 4000 (s/n 201000-later), 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850, Compatible with John Deere Construction and industrial models 480, Replaces John Deere OEM nos A4388R, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498960) $6.01

Spindle Dust Shield - For John Deere tractor models A, AO, B, BN, BNH, BWH, G, GH, GN, GW, 50, 60, 70, 520, 530, 620, 630, 720, 730, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, Compatible with John Deere Harvester (s) 9900, Replaces John Deere OEM number B2693R, 4020KR, Used with AR50962 and AR50963 knees, (Item #: 110385) $12.60

Square Rim Clamp Bolt, Used - For John Deere tractor models A, AO, AR, 50, 60, 70, 620, 630, 720, 730, 1010, 1830, 2010 (s/n 42001-later), 2030, 2130, 2510, 2520, 3010, 3020, 3030, 3040 (s/n 430000-later), 3120, 3130, 3140 (s/n 430000-later), 4000 (s/n 201000-later), 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, Compatible with John Deere Combine(s) 55, 95, 105, 6602, 6622, Replaces John Deere OEM nos A4064R, R34801, 5/8" X 3 - 3/4", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 444631) $3.76

Steering Wheel Shaft Bushing - For John Deere tractor models 530, 630, 730, Replaces John Deere OEM number R20370R, 1.00" Length, 1.00" Outer Diameter, 0.880" Inner Diameter, 3 Bushings per tractor, (Item #: 126727) $25.30

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims PAR10X28, C5NN1050J and C5NN1050H. Replaces: F3583R, M2335T. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.60

No
Picture
Wheel Bearing Kit - For A, B, D, G, 50, 520, 60, 620, 70, 720, 730, (AO, AR, GH, 530, 630, all with Factory Wide Fronts ONLY). Wheel Bearing Kit for 1 Wheel. Kit contains 1 each of the following p/n 3383, 3320, 2785, 2720, D636R; which cross to the numbers JD7270, JD7224, JD7266, JD7216, D636R. (Item #: 102226, Ref: WBKJD1) $96.00

Wheel Half Sleeve, Used - For John Deere tractor models 70, 520, 530, 620, 630, 720, 730, 2510, 2520, 2840, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4230, Replaces John Deere OEM number R32224, A4386R, Use with Rear Cast Wheels F1478R, F1500R, F1590R, F1591R, R21480, R31610, or R31620, Other Half Sleeve use Item #: 499550, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499525) $60.01

Wheel Half Sleeve, Used - For John Deere tractor models 50, 60, 70, 520, 530, 620, 630, 720, 730, 2355, 2510, 2520, 2555, 2755, 2840, 2855, 2940, 2950, 2955, 3010, 3020, 3055, 3255, 4000, 4010, 4020, 4030, 4230, Replaces John Deere OEM number A4384R, Pinion Half, Hi-Crop and 4000 Series, Other Wheel Half use Item #: 499525, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 499550) $25.01

Wheel Stud - Wheel stud measuring 1/2 x 1 1/2 UNF. Replaces 512581M1, 887135M1, 906863M1, 549962R1, 641513M1, 04557AB, K1669, JD22, JD19R, GK4207, AL2329T, A30064, 70256906, 70207503, 351079R1, 256906, 207503, IK736, 10A863, 16216A, For the following tractors: A, B, G, M, 50, 60, 70, 630, 730, MI, MT, 320, H, R, 40, 80, 330, 420, 430, 520, 530, 620, 720, 820, 830, 1010, 1020, 1520, 2010, 2020, 2030, 3010, BW, BWH (Item #: 111560, Ref: 512581M1) $1.60

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $385.00

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $97.00

Decals and Emblems

2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 3 1/2" x 4" black and silver, vinyl cut. (Item #: 183241, Ref: R4697) $7.70

2 Legged Deer Decal - John Deere Leaping 2 Legged Deer, 2 1/2" x 3", black and yellow, vinyl cut. (Item #: 183158, Ref: R4696) $7.70

2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 2" x 2 1/2", black and yellow, vinyl cut (Item #: 183237, Ref: R4695) $9.00

No
Picture
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Item #: 183582, Ref: R5186) $22.70

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Item #: 183188, Ref: R5187) $14.80

2 Legged Deer Decal - John Deere leaping 2 legged deer, 9" yellow with black deer on vinyl. (Item #: 183225, Ref: R5188) $32.80

No
Picture
2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with silver deer on vinyl. (Item #: 183579, Ref: R5189) $14.80

4 Legged Deer Decal - "John Deere Quality Farm Equipment" 10" on vinyl. (Item #: 183248, Ref: R5184) $40.40

No
Picture
4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Item #: 183604, Ref: R5185) $40.40

Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Item #: 173325, Ref: JDL2Y) $23.60

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $14.40

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Item #: BTW28) $35.98

No
Picture
Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Item #: BTW72) $53.81

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $49.20

Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Item #: 105667, Ref: 1006501) $53.00

Magneto, Wico XH and XHD, Service and Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Item #: 182504, Ref: MAG6) $19.20

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $4.80

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $16.80

$John Deere 630 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $16.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.90

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $81.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $108.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $161.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $145.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust System - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$John Deere 630 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $2.10

$John Deere 630 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$John Deere 630 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.80

$John Deere 630 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $5.30

$John Deere 630 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.40

$John Deere 630 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.00

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.30

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $12.70

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $11.00

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $8.80

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $12.50

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.00

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $11.90

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.40

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $17.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.50

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $8.50

Fuel System / Air Intake

Carburetor Elbow and Strainer - Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Item #: 110005, Ref: 9N9553) $5.50

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.92

$John Deere 630 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.00

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $63.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $42.30

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.40

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.10

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.00

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.91

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $14.90

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.90

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Item #: 169771, Ref: 170BH) $7.86

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inches to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $132.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.10

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.30

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $51.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $87.12

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $106.22

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $78.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $125.34

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.10

Lights

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Item #: L200MAGH) $75.13

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Item #: 173803, Ref: L408-12V) $38.40

Miscellaneous

Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. (Item #: 186987, Ref: R1236) $389.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Hand Cleaner, Gallon - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Item #: 180453, Ref: PRM25218) $24.60

Tractor Umbrella with Frame & Mounting Bracket - Yellow - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, Additional Handling & Oversize Fees Apply To This Item, (Item #: 161195) $124.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.50

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $65.00

No
Picture
Paint, Clear Coat, 1 Quart - High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.00

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $24.00

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.30

No
Picture
Paint, Green, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108349, Ref: TP210GAL) $78.00

No
Picture
Paint, Green, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108348, Ref: TP210QT) $30.90

No
Picture
Paint, Green, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108347, Ref: TP210SP) $10.50

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108346, Ref: TP530GAL) $110.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108345, Ref: TP530QT) $40.00

No
Picture
Paint, Industrial Yellow, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108344, Ref: TP530SP) $10.00

No
Picture
Paint, JD Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102411, Ref: TP190GAL) $59.00

No
Picture
Paint, JD Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102410, Ref: TP190QT) $24.00

No
Picture
Paint, JD Yellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102409, Ref: TP190SP) $8.10

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $59.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $24.00

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $24.00

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $8.50

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $40.00

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $174.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $268.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Tie-On Seat Cover - Yellow and Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179179, Ref: R2602) $48.80

Tie-On Seat Cover - Yellow and White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Item #: 179810, Ref: R1014) $42.95

Tie-On Seat Cover - Green and White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Item #: 179516, Ref: R1016) $49.57

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Fender Hand Grip - Used on many ag tractors, combines, implements and industrial tractor applications. (Item #: 103959, Ref: R20759) $8.80

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $173.00

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $23.10

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $287.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: JD1293, JD3039 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. (Item #: 116854, Ref: FW55166) $78.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply.Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $19.10

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $57.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $111.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $67.00

No
Picture
Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube. Not for use with radial tires. (Item #: 183819, Ref: WHS064) $82.00