(800) 853-2651   Cart  View Cart    
Low Prices, Fast Shipping

 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


John Deere 2630 Tractor Parts

[ Show Pictures ]

[Show Categories]   [Show all John Deere Models]   [Printer Friendly]  


Clutch
Carrier, Clutch Throw Out Bearing - For models 1020, 1520, 2020, 2030, 2240, 2440, 2630, 2640, 300, 300B, 301, 301A, 302, 302A, 310, 310A, 380, 400, 401, 401B, 401C, 410, 480, 480B. (Part No: AT20055) $65.89

Clutch Disc - 11 inch diameter, 1 inch hub, 15 spline. For models 1020, 1520, 2020, 2030, 2040, 2440, 2630, 2640. Industrials: 300, 300B, 301, 302, 401, 401B, 401D. (Part No: RE29980) $156.08

Clutch Fork - For models 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1830, 1850, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2630, 2640, 2840, 300, 300B, 301, 301A, 302, 302A, 3030, 3120, 3130, 400, 401, 401B, 401C, 655, 655B, 750, 750B, 755, 755A, 755B, 820, 830, 850, 850B, 855, 920, 930, 940. (Part No: T21999) $80.91

Clutch Kit, 10 Inch - For models 1020, 2020, 2030, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640. Clutch Kit for tractors with reverser transmission. Includes remanufactured pressure plate assembly, 10", 3 springs, remanufactured heavy duty disc, 10", 20 spline, 1 5/16" hub, 6 pads, new release and pilot bearings. Additional $21 core charge. Core charge refunded after inspection. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: TP-R60368K) $309.42

Clutch Plate, Powershaft - 4.917" O.D., 3.903"ID. For models (1020 with independent 540 PTO), (1520 with indp PTO SN# xxxxxx and up), (1530 with indp 540 PTO used with AL29818 frum), (2020 with indp PTO used with AL29181 drum), (2030 with indp 540-1000 PTO SN# 187301 and up used with AL29820 drum), (2040 with 540 PTO SN# 350000 and up), 2155, 2240, 2355, 2355N, 2440, 2630 with indp 540-1000 PTO), 2640, 2755, 2840, 2855, 2940, 2955, 3055, 3155, 3255. (Part No: T28665) $48.11

Pilot Bearing - .6693" I.D. For models 1010, 1020, 105, (1120 Canada single ind. PTO), (1130 Europe single ind. PTO), 1520, 1530, 2010, 2020, 2030, 2040, (2150 reverser), (2155 reverser), 2240, (2355 reverser), 2440, 2510, 2520, (2555 reverser), 2630, 2640. (Part No: JD9449) $3.79

Pilot Bearing - I.D . .590", O.D. 1.375", Thickness .430". For models 830, 840, 920, 930, 1010, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1720, 1830, 1840, 1850, 1950, 2010, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855, 2940, 2950. (Part No: AL10107) $15.35

Release Bearing - Clutch release bearing, for models using bearing carrier R51469. For models 1020, 1520, 1530, 2020, 2030, 2240, 2440, 2630, 2640. (Aetna A3544, A3544-15). 3.7960 outside diameter, 2.2495 bore, .8110 wide. For 4000, 4010, 4020. (Part No: TP-AR43065) $42.36

Cooling System
Radiator - For 1520 with hi-lo shift or reverser, 2020, 2030, 2630, 2440 to SN# 340999, 2640 to SN# 340999; industrial 300B. For Tractors with a radiator assembly that has a remote oil cooler. (Part No: TP-AR65715) $380.65

Radiator Hose Upper - Hose, radiator upper for tractor: 2630. For models 4040, 4230, 5020, 6030. (Part No: R55262) $14.79

Thermostat Housing Cover - For models 1020, 1030, 1120, 1130, 1520, 1530, 1630, 2020, 2030, (2040, 2240 SN# 349999 and below), 2120, (2440 SN# 305414 and below), 2630, 2640, 300, (300B, 301A, 302, 302A SN# 345266 and below), 301, 400, 401, (401B SN# 468294 and below), (401C SN# 305414 and below), 820, 830, 920, 930. (Part No: T23620) $26.42

Water Pump - For model 2630. NEW Water Pump. Replaces AR63343-R, AR71133, R55164. Comes with gasket and pulley. (Part No: AR63343-R) $200.00

Water Pump Impellor - For models 1020, 1120, 1520, 1530, 1640, 2020, 2040, 2040S, 2120, 2440, 2510, 2630, 2640, 3300, 5105, 5205, 5210, 5220, 5310, 5310N, 5320, 5320N, 820, 830, 8875, 920, (2240 SN# 350000 and up), (2140 SN# 430000 and up). (Part No: T30897) $13.69

Decals and Emblems
Decal Set - For 2630. Hood only decal set. Printed on Vinyl. (Part No: R3769) $25.50

Drive Train
Bevel Gear, Differential - 18 teeth. For models JD300, JD301, JD310, JD380, JD400, JD401, JD480, 1020, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040, 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640, 302, 3300, 410, 820, 830, 840, 920, 1030, 1040, 210C, 2140, 300B, 301A, 302A, 310A, 310B, 310C, 315C, 401B, 401C, 401D, 410B, 410C. (Part No: T29394) $85.42

Differential Housing - For models 1020, 1030, 1040, 1120, 1130, 1140, 1630, 1641F, (1640, 1840, 2040 SN# up to 410063), 2020, 2030, 2120, 2150, 2155, 2240, 2255, 2350, 2355, 2550, 2555, 2630, (300B SN# 195279 and up), (302A SN# 194773 and up), 401B, 401C, 410, 820, 830, 920, 930, 940, JD310, JD380, JD400, JD401, JD480, JD480B. (Part No: T30253) $444.54

Gear (2ND & 6TH) - 36/20 teeth. For JD 2040S, 2130, 2140, 2555, 2630, 2640, 2750, 2755, (1550, 1750, 1850, 2155, 2355, 2450, All SN# 756484>) (Part No: L28664) $114.10

Gear (3RD & 7TH) - 31/20 tooth, 1.375 inch I.D. 4.750 O.D. For JD 1641F, 2020, 2030, 2040, 2120, 2440, 2630, 2640, 820, 920, 2240 SN# 350000> tractors. (Part No: AT30053) $169.32

Gear (4TH & 8TH) - 27/20 tooth. For JD 2130, 2630, 2640, 2140 SN# <363674 tractors. (Part No: L28665) $129.99

Gear Shift Lever, Straight - For models 820, 830, 840, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1830, 2020, 2030, 2120, 2150, 2240, 2255, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750. Knobs available, for BLACK order S.00641, for RED order S.72358, please specify in comments section if needed. (Part No: AL32791) $25.44

Oil Seal - Seal. For models 820 Mannheim prior to serial number 042924~ 830 Mannheim with T25809 hub~ 1020 and 1520 except Heavy Duty axle on Hi-Crop and Row Crop~ 2010 except low profile Row Crop, 2020~ 2030 except Heavy Duty axle, 2040 with T25809 hub, 2240, For 1020, 1520, 2010, 2020, 2030, 2040, 2240, 2630, 2640, 820, 830 (Part No: TP-AT10344) $11.22

Shift Collar, Transmission Countershaft - 20 spline. For models (1020, 1120, 2020, 2120 SN# 77422 and up), (1030, 1130, 1630 SN# 317105 and up), 1140, 1350, 1550, 1640, 1641F, 1750, 1830, 1840, 1850, 2030, (2040, 2240 SN# 350000 and up), 2130, 2140, 2150, 2155, 2250, 2255, 2350, 2355, (2440 SN# up to 340999), 2450, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 840, 940. (Part No: R50655) $74.86

Shift Lever - For models 1020, 1520, 2020, 2030, 2240, 2440, 2630, 2640, 300, 300B, 301, 301A, 302, 302A, 401, 401B, 401C, (820 SN# up to 024012) (Part No: AT20093) $52.72

Shifter, Low/Reverse Range - For models (820, 920, 1020, 1120, 2020, 2120 SN# 077422 and up), 830, 930, 1030, 1130, 1630, (1640, 2040, 2040S, 2140 SN# 430000 and up), 1830, (2030 SN# 246645 and up), 2130, 2150, 2255, 2350, 2440, 2550, 2630, 2640, 2750. (Part No: R60557) $77.47

Transmission Filter - Transmission oil filter. Filter element, cartridge type. Replaces AR28271, AR75601. For models 2510, 3010, 4010, 5010, 80, 820, 1020, 1120, 1520, 2020, 2120, 2520, 3020, 4020, 4320, 4520, 4620, 5020, 7020, 7520, 830, 840, 1530, 2030, 2630, 4030, 4230, 4430, 4630, 6030, 8430, 8630, 2040, 2240, 2640, 2940, 2150, 2350, 2450, 2550. (Part No: AR75603) $12.76

Electrical System
Alternator - 12 volt, 37 amp. For models (2440 1976-82 with 219 dsl), (2630 1974-76 with 276 dsl), (2640 1976-82 with 276 dsl), (1020 1965-73 with 135 gas or dsl), (1520 1968-73 with 164 gas/dsl), (1530 1974-75 with 164 dsl), (2020 1965-72 with 180 gas/ 202 dsl), (2030 1971-75 with 219 gas/dsl). Replaces AT21618, AT21619, A12NJD452, A12NJD454, SE501350, TY1428, 11030, 11057. (Part No: AMO0018) $117.93

Battery Door - For 820 (3 Cyl), 830 (3 Cyl), 1020, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640 (Part No: R2677) $47.70

Cab Accessory Relay - 12 Volt cab and accessory relay~ Used on: 1530, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 5020, 6030, 7020, 7520, 8430, 8440, 8630, 2040, 2240 tractors~ 2420 windrowers~ 4310 beet harvester~ 85 row crop cultivator. (Part No: TP-AR54484) $36.93

Relay, Cab and Accessory - 12V, 80 amp contact rating relay. For models 1530, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 5020, 6030, 7020, 7520, 8430, 8440, 8630, 2040, 2240. (Part No: TPAR54484) $32.17

Engine Bearings
Main Bearing Set - Available in STD, .010, .020, .030 For 2630, 2640 with 276 Diesel Engine. Specify size in Comments box when ordering. (Part No: R-RE27352S4) $85.88

Rod Bearing - Connecting rod bearing, standard size. 4 used per engine. For 276 CID 4 cylinder diesel non-turbo engine~ 4.19 standard bore, 3 ring piston. For 2630, 2640 (Part No: TP-AR97517) $23.85

Rod Bearing - Connecting rod bearings, .020 undersize. 4 used per engine. Replaces AR68415. For 276 CID 4 cylinder diesel non-turbo engine~ 4.19 standard bore, 3 ring piston. For 2630, 2640 (Part No: TP-AR97654) $27.50

Rod Bearing - Connecting rod bearing, .030 undersize. 4 used per engine. Replaces AR68416. For 276 CID 4 cylinder diesel non-turbo engine~ 4.19 standard bore, 3 ring piston. For 2630, 2640 (Part No: TP-AR97655) $20.96

Rod Bearing, .010 - Connecting rod bearing, .010 undersize. 4 used per engine. Replaces AR68414. For 276 CID 4 cylinder diesel non-turbo engine~ 4.19 standard bore, 3 ring piston. For 2630, 2640 (Part No: TP-AR97653) $27.50

Thrust Bearing Set, .010 Flange - Fits only the following diesel engines, 3.152, 3.164, 3.179, 4.039, 4.202, 4.219, 4.239, 6095D, 6.329, 6.359, 6.414. Used in Models: 1020, 1030, 1040, 1052, 1072, 1075, 1140, 1155, 1350, 1420, 1520, 1530, 1550, 1630, 1750, 1850, 2020, 2030, 2040, 2130, 2140, 2150, 2155, 2240, 2250, 2270, 2280, 2320, 2330, 2350, 2355, 2420, 2440, 2450, 2510, 2520, 2530, 2535, 2550, 2555, 2630, 2640, 2650, 2730, 2735, 2750, 4020, 4030, 6700, 6800, 6900. (Part No: AT21132) $26.77

Engine Gaskets
Front Crank Seal, Diesel - Front seal. Fits 135, 152, 164, 202, 219, 179, 239, 329 & 359 CID diesel engines. For models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 4030. (Part No: AR67942) $9.44

Full Gasket Set - With Rear Main Seal & Timing Cover Seal. For models 2630, 2640 with 276 Diesel Engine. (Part No: R-RE37715) $124.88

Gasket Set - Complete gasket set with crankshaft seals and sleeves (where required). 1 used per engine. For 276 CID 4 cylinder diesel non-turbo engine~ 4.19 standard bore, 3 ring piston. For 2630, 2640 (Part No: FS4276) $172.64

Head Gasket Set - For 2630, 2640 with 276 Diesel Engine (Part No: R-RE38851) $66.15

Oil Pan Gasket - For models 2020, 2030, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755. (Part No: R97342) $23.52

Rear Crank Seal - For models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 4030. (Part No: AR92893) $34.75

Rear Main Seal - For 2630, 2640 with 276 Diesel Engine (Part No: R-RE24959) $30.00

Seal - For models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 5010. Must order in quantities of 2, price is for 1. (Part No: TP-AR26480) $13.26

Upper Gasket - For models 2030, 2350, 2355, 2440, 2520, 2550, 2555, 2630, 2640, 2750, 2755. (Part No: HS3900) $65.34

Engine Rebuild Kits
Basic In-Frame Overhaul Kit - Made by TISCO. Basic in-frame engine kit. Contains complete sleeve and piston kit with rings, pins & retainers, valve grind gasket set and pan gasket. For 276 CID 4 cylinder diesel non-turbo engine~4.19 standard bore, 3 ring piston. For 2630, 2640 (Part No: BIFD4463) $709.80

Basic Overhaul Kit - Made by TISCO. Basic engine kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaft seals. Order engine bearings separately. For 276 CID 4 cylinder diesel non-turbo engine~4.19 standard bor For 2630, 2640 (Part No: BEKD4463-LCB) $856.27

Engine Major Overhaul Kit - For 2630, 2640, (410C with Turbo), all with 4.276D Diesel, 300 Series, 4 cylinder, 4.19" bore, 1.37" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings/Bushings/Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or.030, Thrust Bearing Size of Standard, .010, .020 or.030, Connecting Rod Bearing Size of Standard, .010, .020, or.030. Camshaft Bushing of out dia.020 O/S or in dia.020 O/S. (Part No: AT86990) $1120.71

In-Frame Overhaul Kit - 4.190 Bore with 1 3/8 Piston Pin. For models 2630, 2640 with 276 Diesel Engine. Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. (Part No: JD-276SP-IFK) $708.66

Overhaul Kit - Made by TISCO. Engine overhaul kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaft seals, intake & exhaust valves, valve caps, retainers & springs. Order engine bearings separately. For 276 For 2630, 2640 (Part No: EOKD4463-LCB) $901.81

Overhaul Kit - 4.190 Bore with 1 3/8 Piston Pin. For models 2630, 2640 with 276 Diesel Engine. Contains Pistons with pins and retainers, piston sleeves, overhaul gasket set, rod bearings, main bearings. (Part No: JD-276SP-OHK) $796.48

Engine Parts
Connecting Rod - Reconditioned rod with casting # R51727R. For models 1520, 1530, 2030, 2630, 2640, 2840, 4030 all with diesel engines. (Part No: R1203181) $121.16

Crankshaft - For 2630, 2640. Crankshaft with Gear, Less bearings. New. For 4 cylinder 276 Diesel. Replaces AR62362 marked R54501. ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** (Part No: RE56792) $680.35

Crankshaft Pulley - For JD400, 1830, 2030, 2130, (2440 and 2640 with SN# above 341000). Crankshaft Pulley replaces R59312, R47412, T25365. 1.5" I.D. 6 hole. (Part No: R59312) $105.00

Cylinder Head Overhaul Kit - Cylinder HEAD Overhaul Kit. For models 2020, 2030, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640. (Part No: VOKD202) $172.45

Lifter, Refaced - For Models: 820, 1020, 1520, 2020, 2520, 1530, 2510, 2030, 2630, 2640, 4030, 2040, 2240, 2440, 2940, 2840, 2150, 2250, 2950, 2350, 2550, 2750, 3300, 4400with 239 engine, 4420 with 359 Diesel engine all with casting number T20073 (Part No: R1188499) $12.05

Ring Gear - For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 2955, 3055, 3150, 3155, 3255, 5200, 5300, 5400, 5500, 6200, 6300, 6400, 6500. Starter Flywheel Ring Gear for DIESELS. (Part No: R114282) $39.68

Starter Flywheel Ring Gear - For Diesel Tractors: 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 2955, 3055, 3150, 3155, 3255, 5200, 5300, 5400, 5500, 6200, 6300, 6400, 6500. For Diesel Engines: 4219, 6329, 6359 in combines: 3300, 4400, 4420, 4425, 4435, 6600. For Diesel Engines in Windrowers: 2250 with 4219, 2270 with 4219, 2280, 2420, 2360 3430, 3830. Replaces T20088. (Part No: PT-R114282) $39.68

Tappet - For models 2510, 5210, 5310, 5410, 5510, 820, 920, 1020, 1120, 1520, 2020, 2520, 3120, 5220, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 4030, 2040, 2140, 2240, 2440, 3040, 3140, 3050. (Part No: T20073) $15.74

Valve Service Kit - Cylinder HEAD Service KIT For 1530, 2020, 2030, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 3020. Contains: springs, caps, locks, (no valves or guides). (Part No: VSKD202) $71.69

Valve, Exhaust - Valve, exhaust, standard. 6 used per engine. For 329 CID 6 cylinder, diesel engine serial number 277549 and up. 4.02 standard bore~ 3 ring piston, keystone top compression ring. For 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 4030 (Part No: TP-R79624) $19.26

Valve, Intake - For models 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2840, 2940, 2950, 2955, 4030. (Part No: R79623) $16.92

Engine Pistons and Sleeves
Piston Kit - Sleeves, 3 ring pistons & rings, 1-3/8 outside diameter pins & retainers. 1 used per engine. For 276 CID 4 cylinder diesel non-turbo engine~ 4.19 standard bore, 3 ring piston. For 2630, 2640 (Part No: PKD463) $531.93

Piston Pin Bushing - Bushing, for 1-3/8 outside diameter piston pin. 4 used per engine. For 276 CID 4 cylinder diesel non-turbo engine~4.19 standard bore, 3 ring piston. For 2630, 2640 (Part No: TP-R57450) $23.96

Sleeve Assembly (4 Required) - 4.190 Bore with 1 3/8 Piston Pin. For models 2630, 2640 with 276 Diesel Engine. (Part No: R-RE19831) $131.63

Engine Rings
Piston Ring Set - Ring set for 3 ring piston~ 1 used per engine. For 276 CID 4 cylinder diesel non-turbo engine~ 4.19 standard bore, 3 ring piston. For 2630, 2640 (Part No: PRSD461) $151.29

Exhaust System
Manifold - For models (2020, 2030, 2440, 2510, 2520, 2630, 2640 All with 4 Cylinder Diesel Engine). Exhaust Manifold. Does Not come with gasket. Gasket set available Part #R0911G. State in comments section of order form if desired. (Part No: T20249) $114.75

Fuel System / Air Intake
Air Cleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top: 7-1/4~ side height: 3~ cone inside diameter at top: 3-1/2~ overall height: 4-1/8. For tractors: 1010 dsl, 2010, 2020 dsl, 2030, 2040, 2150, 2255, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020. (Part No: R28794) $10.64

Air Cleaner Pipe Grommet - For models (820, 830 3 cylinder), 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 6150, (4000, 4020 diesel), 4030, 4040, (4050 up to SN# 5510), 4230, 4240. Replaces AR56275, R28799, R50082, R57119. (Part No: AR56061) $20.20

Fuel Pump - Fuel transfer pump, similar to original equipment manufacturer, cannot be repaired. Diesel tractors: 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050 (6359TP), 5020, 6030. Gas tra For 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050, 4230, 5020, 6030 (Part No: TP-RE42211A) $59.08

Fuel Pump - Replacement fuel transfer pump, can be repaired. For diesel tractors: 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050(6359TP), 5020, 6030. Can be serviced with repair kit TP-RE42. (Part No: TP-RE42211B) $41.15

Fuel Sending Unit - For models 1020, 1520, 1530, 2020, 2030, (2440, 2640 SN# up to 340999), 2630, 300B, 301A, 302, 302A, 310A, 310B, 401B, 401C, JD300, JD301, JD310, JD380, JD400, JD401, JD410, JD480, JD480A, JD480B. (Part No: AT20912) $57.86

Fuel Tank Cap - For models 1020, 1520, 2010, 2020, 2030, 2440, 2510, 2520, 2630, 2640, 300B, 3010, 301A, 302, 3020, 302A, 310A, 310B, 4000, 4010, 401B, 401C, 401D, 4020, 4030, 4040, 4050, 410, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 480C, 5010, 300, 301, 310, 380, 400, 401, 440, 440A, 440B, 480, 480A, 480B, 500, 500A, 500B, 600. (Part No: AT20911) $10.66

Fuel Tank, Polyethylene - Includes tank, cap, hose, clamps, & filler neck. For models 1520, 2020, 2030, (2440, 2640 up to SN# 340999), 2630, 300B. (Part No: AR72996) $870.48

Fuel Transfer Pump Repair Kit - Repair kit, for fuel transfer pump RE42211, RE42211B. Used on diesel tractors: 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050(6359TP), 5020, 6030. Gas tractors: 1520, 2030 For 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050, 4230, 5020, 6030 (Part No: RE42211RK) $19.50

Glass Body Fuel Filter - Diesel fuel filter element~ see-thru glass body. For most 1971 and up John Deere 4 and 6 cylinder tractors and combines produced in U.S.A. and equipped with Roosa-Master injection systems. Replaces Baldwin BF-909, Wix 33370, and Fram P1130. For 1530, 2040, 2240, 2440, 2630, 2640, 2840, 2940, 3020, 4000, 4030, 4040, 4230, 4240, 4320, 4400, 4420, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 6600, 6602, 6622, 7020, 7520, 7700, 820, 830, 8430 (Part No: AR50041) $17.88

Grommet, Fuel Filler, Red - For models 820 (3 cyl.), 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 5010. (Part No: R39613R) $25.00

Injector Nozzle - Pencil type injector for 300 Series diesel engines (4-276D, T 6-359D, T, A, 6-414D, T. Injectors marked 20291, 20504, 22205, 22264, 22265, 26993, 27336, 27337, 38087. For models (2355 3 cylinder), 2555, 2755, 2630, 2640, 2750, 2855, 3255, 4050. (Part No: RE37503) $55.86

Pre-Cleaner Cover, Metal - 7" diameter with brass nut, fits Donaldson pre-cleaners. For models Some 60, 70, 520, 530, 620, 630, 720, 730, (820, 830 3-cyl), (1010, 2020, 2520 diesel), 2010, 2030, 2040, 2150, 2155, 2240, 2255, 2355, 2440, 2510, 2630, 2640, 2840, 3010, 3020, 4000, 4010, (4020 gas or LP). (Part No: AF3583R) $24.75

Hitch / Drawbar
Drawbar - Straight 1.250 x 2.50 x 36.750.781 Holes at 1.125, 2.750, & 8.578 For 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 2020, 2040, 2240, 2350, 2355, 2550, 2630, 2640, 2750, 2755, 2855 (Part No: R3092) $162.66

Drawbar Hammer Strap - .75" thick. For models 1020, 1250, 1450, 1530, 1650, 2010, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2855N, 5105, 5200, 5205, 5210, 5220, 5300, 5310, 5320, 5320N, 5400, 5410, 5420, 5420N, 5500, 5510, 5520, 5520N, 820, 830. (Part No: T29899) $50.24

Drawbar, Offset - 2.250 Offset 1.25" x 2.50" x 36.625" (.781 Holes at 1.125, 2.750, & 8.575") For 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 1640, 1641, 1830, 1840, 2020, 2030, 2040, 2130, 2140, 2141, 2240, 2250, 2251, 2350, 2351, 2355, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2651, 2750, 2755, 2850, 2855, 820, 830. ADDITIONAL $15 SHIPPING DUE TO WEIGHT. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Drawbar pin available as part# L32016. (Part No: L29020) $174.89

Front Pull Arm, Left Hand - Left Hand - Telescoping Style For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640 (Part No: AT30151) $298.66

Front Pull Arm, Right Hand - Right Hand - Telescoping Style For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640. (Part No: AT30150) $300.46

Housing Assembly - 15 Long - Adjustable Consists of: R3104, R3106, R3110, R3111, R3112, R3119, & R3120 For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255 (Part No: R3109) $162.66

Housing Assembly - 17.50 Long - Adjustable Consists of: R3104, R3105, R3110, R3111, R3112, R3119, & R3120 For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255 (Part No: R3108) $162.66

Leveling Box, Original Style - For 820 German, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2355, 2350, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255. Original Style Levling Box - 17 1/2" ROD. (Part No: S-AR44551) $148.14

Leveling Box, Original Style - For 820 German, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2355, 2350, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255. Original Style Levling Box - 15" ROD. (S.60534) (Part No: S-AR44552) $148.13

Lift Link Assembly, Left Hand - Left Hand - Non-Adjustable with 17.50" (hole-to-hole) lift link rod. Fits: 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. (Part No: AR44556) $100.69

Lift Link Assembly, Left Hand - Left Hand - Non-Adjustable with 21.75" (hole-to-hole) lift link rod. For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. (Part No: AR44554) $112.33

Lift Link Assembly, Right Hand - Right Hand. 15 inch rod length. For models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. (Part No: AR44552) $196.32

Lift Link Assembly, Right Hand - Right Hand. 17.5" rod length. Housing Assembly. For: 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. (Part No: AR44551) $148.14

Pull Arm, Heavy Duty, Cat II, RH/LH - 33.50" Center to center. Hole towards center is not as pictured. For models JD301, JD400, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2855, 301A, 302, 401B, 401D, 820, 830, 300B, 302A, 401C. Replaces AT19849. (Part No: AR77530) $286.59

Rear Pull Arm, Telescoping - Left or Right Hand Telescoping Style. For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2855, 301A, 3010, 3020, 4000 & 4020 (SN# 201000 and above), 4030. Also replaces OEM# AL24137. (Part No: AR28570) $172.07

Sway Block Bracket, LH - For models (820 German), 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2155, 2355, 2555, 2755, 300B, 2630, 2640, 2855. (Part No: S.61017) $44.34

Sway Block Bracket, RH - For models (820 German), 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2155, 2355, 2555, 2755, 300B, 2630, 2640, 2855. (Part No: S.61018) $44.34

Sway Block, LH - For models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2355, 2555, 2630, 2640, 2755, 2855. (Part No: T30277) $42.04

Sway Block, RH - For models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2355, 2555, 2630, 2640, 2755, 2855. (Part No: T30276) $42.04

Top Link Bracket - For 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 2020, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2855. (Part No: T21685) $67.31

Valve Seat Insert, Rockshaft Cylinder - For models 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2940, 2950, 2955, 300B, 301A, 302, 302A, 3030, 3040. (Part No: T28538) $27.21

Valve Spool, Rockshaft Cylinder - For models 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2940, 2950, 2955, 300B, 301A, 302, 302A, 3030, 3040. (Part No: R54969) $24.09

Hydraulic System
Hydraulic Pump Drive Coupler Half - Two required for 1 complete coupler. For models JD300, JD301, JD400, 301A, 302, 3030, 3120, 3130, 401B, JD380, 401C, 480C, (830, 930 SN# 258366 and up), (1020, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2120, 2130, 2140, 2240, 2440, 2510, 2520, 2630, 2640, 300B, 1030 all with small pump). (Part No: R38348) $14.88

Hydraulic Pump Seal & O-Ring Kit - 39cm^3, 49cm^3 pump less serial plate. This kit is used on pumps that require the quad ring with backup washer rather than the teflon sealing washer. For models 2510, 3010, 4010, 5010, 3020, 4020, 4320, 4520, 4620, (5020 up to SN# 024999), 7020, 7520, 1830, 2030, 2130, 2630, 3030, 3130, 4030, 4230, 4430, 4630, 1640, 1840, 2040, 2040S, 2140, 2440, 2640, 2840, 2940, 3140, 4040, 4240, 4440, 4640, 4840, 2750, 2950. (Part No: RE29103) $60.38

Hydraulic Pump Seal Kit - Repairs AR103033 (23CMS) & AR103035 (11.3 CMS) Hydraulic Pumps. For JD 300, 301, 400, 401, 1020, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1641, 1750, 1830, 1840, 1850, 1950, 1950N, 2020, 2030, 2035, 2040, 2040S, 2120, 2130, 2135, 2140, 2141, 2150, 2155, 2240, 2250, 2251, 2251N, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2650N, 2651, 2750, 2755, 2850, 2855, 2941, 2951, 301A, 302, 3030, 3040, 3050, 3120, 3130, 3135, 3140, 3141, 3150, 3340, 3350, 3351, 3640, 3641, 3650, 3651, 4010, 7440, 7445, 830, 840, 930, 940, 1040. Industrials: 301, 400, 401. (Part No: S-AR98993) $28.86

Hydraulic Pump Stroke Control Valve - For models 2030, 2155, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855N, 2940, 2955, 3010, 3020, 3055, 3155, 3255, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4560, 4640, 4760, 4840, 4850, 4960, 5010. Replaces R70559, AR64604, R55464, R65192, R65193, R65194. (Part No: RE10712) $38.92

Hydraulic Pump, New - 3 cubic inch, serialized pump, has two 1-1/16" inlet ports located directly across from each other. For models 1550, 1640, 1750, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2155, 2250, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3350, 3650, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230. (Part No: AR94660) $1176.00

Pump Shaft, Hydraulic - Keyed type. For models 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2355, 2440, 2555, 2630, 2640, 2755, 2855. (Part No: R39319) $53.01

Selective Control Valve - Return & pressure valve. For models 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2355, 2440, 2520, 2555, 2630, 2640, 2755, 2840, 2940, 2955, 3020, 3055, 3155, 3255, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630. Replaces AR78396. (Part No: AR86535) $29.58

Lights
Light Mounting Bracket - Bracket Clamp sold seperately as Part # R27460 - 2 clamps required per bracket. For models 820 3 cyl, 830 3 cyl, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040 up to SN# 349999, 2240 up to SN# 349999, 2510, 2630 and also fits the following models with stolper cab: 3020, 4000, 4020, 4320, 4520, 5010, 5020, 6030. (Part No: T12443) $43.90

Light Mounting Clamp - Half Clamp for clamping mount part number T12443. 2 used per bracket. Price is for 1. For models 820 3 cyl, 830 3 cyl, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040 up to SN# 349999, 2240 up to SN# 349999, 2510, 2630 and also fits the following models with stolper cab: 3020, 4000, 4020, 4320, 4520, 5010, 5020, 6030. (Part No: R27460) $12.43

Light Switch, 5 Position - 5 terminal. For models 1040, (830 3-cyl), 920, 1140, 1630, 1640, 1830, 2030, 2040, 2040S, 2240, 2440, 2630, 2640, 2840, (3030, 3130 from SN# 162948 and up), 300B, (2150, 2155, 2255, 2355, 2550, 2555, 2755, 2855, 2940, 2950 without Sound guard cab). (Part No: AR66478) $36.75

Red Light with Brass Ring - For models A, B, G, R, 40, 320, 420, 430, 50, 60, 70, 80, 520, 530, 620, 720, 730, 82, 930, 1020, 2020, 2030, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3010, 3020, 4010, 4020, 4320, 4520, 4620. (Part No: AA925R) $13.80

Work Tail Light - 2 wire connectors. For models 50, 60, 70, 80, 520, 530, 620, 720, 730, 820, 930, 1020, 2020, 2030, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3010, 3020, 4010, 4020, 4320, 4520, 4620. (Part No: AR77326) $69.86

Oil System
Oil Filter - Oil filter element, spin-on type. For Cotton Pickers/ Strippers: 482, 484, 9900, 9910. For 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2150, 2240, 2250, 2255, 2270, 2280, 2350, 2355, 2420, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3300, 4030, 4400, 4420, 482, 484, 6600, 6602, 7700, 9900, 9910 (Part No: TP-T19044) $8.60

Oil Pressure Sending Unit - For models 1010, 1020, 1520, 1530, 2010 SN# 42001 and up, 2020, 2030, 2040, 2150, 2250, 2155, 2355, 2240, 2350, 2550, 2355, 2555, 2440, 2510, 2520, 2630, 2640, 2750, 2755, 2855, 2840, 2940, 2950, 2955, 3010, 3020, 3055, 3255, 3155, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 720, 730, 820, 830, 840, 8440, 8640, 8630. (Part No: AR27977) $16.46

Oil Pump - Casting # R39244 or R57959, used ony with dual speed PTOs. For models 1020, 1030, 1120, 1130, 1350, 1520, 1530, 1550, 1630, 1750, 1830, 1850, 2020, 2030, 2040, 2120, 2130, 2135, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640, 300B, 301A, 302, 302A, 401B, 401C, 401D, 820, 830, 840, JD300, JD301, JD380, JD400, JD401, JD480, JD480A, JD480B. Replaces AR39107. (Part No: AR96662) $418.50

Oil Pump - For models (1520 late models less Hi-lo shift), 2130, (2440 SN# up to 340999 less hi-lo shift or reverser), (2630, 2640 all less hi-lo shift or reverser). (Part No: AR96664) $454.52

Oil Pump Drive Gear - For models 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3055, 3155, 3255, 4030, 4050, 7200, 7400, 7600, 820, 830. Oil Pump Drive Gear has 33 Tooth, 3.625 O.D., .550" I.D. (Part No: T20298) $106.37

PTO / Driveline
Bearing Housing, without Bearing - For models 820, 920, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2130, (2240 SN# up to 349999), 2440, 2630, 2640. (Part No: T21996) $148.08

PTO Clutch Disc - 45 internal splines, 5.250" O.D.. For models (1020, 1520, 2020, 2640 with hi-lo shift), (1530 SN# xxxxxx and up), (2030, 2630 with hi-lo shift & SN# xxxxxx and up), 2240, (2440, 2640 with ind. 540-1000 PTO & hi-lo trans.), 2940, 2955. Replaces AR78361. (Part No: AR108105) $16.95

PTO Clutch Plate - 5.20" O.D., 3.903" I.D., .179" thick. For models (1020 with independent 540 PTO), (1520 with indp PTO SN# xxxxxx and up), (1530 with indp 540 PTO used with AL29818 frum), (2020 with indp PTO used with AL29181 drum), (2030 with indp 540-1000 PTO SN# 187301 and up used with AL29820 drum), (2040 with 540 PTO SN# 350000 and up), 2155, 2240, 2355, 2355N, 2440, 2630 with indp 540-1000 PTO), 2640, 2755, 2840, 2855, 2940, 2955, 3055, 3155, 3255. AL23113, AT32058. (Part No: L33563) $23.81

PTO Friction Disc - PTO FRICTION DISC For 1020, 1520, 1530, 2020, 2030, 2240, 2440, 2440 LESS HI-LO, 2630, 2640, 2640 LESS HI-LO, 2840 (Part No: TP-RE37011) $16.50

PTO Separator Plate - Application for independent PTO power shaft clutch. IPTO: 540-1000. Separator plate, 5.185" O.D., 3.895" I.D., 10 external splines, application uses 10 sold individually. Used with AL38240 friction discs. For models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2940, 2950, 2955, 3055, 3150, 3155, 3255. (Part No: TP-T28664) $13.78

PTO Shaft, 1000 RPM - 9.781" long, 21 splines. For models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1550, 1640, 1830, 1840, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2250, 2355N, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, JD300, JD301, JD400, JD401. (Part No: T30803) $196.88

PTO Shaft, 540 RPM - Does not include JD7557 bearing race. 9.203" long, 6 spline. For models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1550, 1640, 1830, 1840, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2250, 2355N, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, JD300, JD301, JD400, JD401. (Part No: AT29707) $277.75

Sheet Metal / Body Parts
Battery Cover - For 820 with 3 cyl, 830 with 3 cyl, 1020, 1030, 1530, 1630, 1830, 2020, 2030, 2040, 2120, 2130, 2240, 2440, 2630, 2640. Battery Cover. (R2677) (Part No: AT20026) $47.70

Fender Bracket - For 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5020, 6030, 8430, 8440, 8450, 8460, 8630, 8640, 8650 (Part No: R70588) $197.75

Fender, Flat Top, LH With Hand Hole - For Row-Crop Models, Left-Hand Fender for: 530, 630, 730, 2010, 2030, 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320, Row Crop Models with Flat Top Fenders. Also replaces AR48873. Rubber Hand Hole Grommets available as #R2468. Note in comments section of order form to include Hand Grommet(s). ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE **. (Part No: RE13879) $235.00

Fender, Flat Top, RH - Fender right hand, for row crop tractors less cab & sound guard body. Tractors: 530, 630 gp (SN# 6300000 & up), 730G&D GP (SN# 7300000 & up), 2010, 2030, 2155, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320. For tractors with tire sizes 13.6 x 38, 15.5 x 38, 16.9 x 30, 18.4 x 30, 18.4 x 34. Tractors: 2350, 2550, 2750. Replaces AR20869, AR20870, AR48872, AR48873. *Use fender grip R20759. ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE **. (Part No: RE13878) $235.00

Fender, LH - For 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2750, 2755, 2855N, 300B, 820, 830. Fender, LH. Fender, shell style with braces and brackets welded in place. Comes primed. Replaces AR51407, AR51408, AT20779, AT27148. ADD ADDITIONAL $10 TO SHIPPING CHARGES DUE TO SIZE AND WEIGHT. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: AL28585) $134.77

Fender, RH - For 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2750, 2755, 2855N, 300B, 820, 830. Fender, shell style with braces and brackets welded in place. Comes primed. Fender, RH. Replaces AT20777, AT27146. ADD ADDITIONAL $10 TO SHIPPING CHARGES DUE TO SIZE AND WEIGHT. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: AL28584) $141.63

Side Screen - Side grill panel, 17x17. For tractors: 1520, except low profile, 2020 except low profile, 2030, 2440 to serial number 340999, 2630, 2640 to serial number 340999. Replaces AT19880. For 1010, 2010, 2510, 3010, 3020, 4010, 4020. Replaces OEM# AR72950. (Part No: R0336) $58.59

Step Assembly - For 830 Utility, 1020, 1520, 1530, 1830, 2020, 2030, 2040 before SN# 349999, 2130, 2240, 2440, 2630, 2640, 2840. OEM# F3195R. Verify OEM number, may not fit some late models. (Part No: R3879) $49.61

Step Pad - For models 1020, 1120, 1520, 1530, 1830, 2010, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 3010, 3020, 4000, 4010, 4020, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4520, 4620, 50, 5010, 5020, 520, 530, 60, 6030, 620, 630, 70, 720, 730, 80, 8020, 820, 830, 8450, 8650, 8850, 920, A, B, G (Part No: F3195R) $29.87

Steering
Bellcrank - For models (2440 SN# up to 308804 with straight adj. front axle), (JD301, JD401, 1020, 1520, 1530, 2020, 2030, 2630 all with straight adj. front axle). (Part No: AT19793) $230.33

Bellcrank - For models (2440, 2640 SN# up to 308804 with 49"-79" swept back adj. axle), (2040, 2240 SN# up to 349999 with swept back adj. axle), (1530 with straight or swept back adj. axles), (JD301, JD401, 2630, 820, 830 with swept back adj. axle), (1020, 2020, with 44"-66" or 48"-78" swept back adj. axle), (1520 with 48"-78" swept back adj. axle), (JD300, JD400 without loader/backhoe with swept back adj. axle). (Part No: AR92944) $302.52

Bellcrank - Casting #T21504. For models (300, 301, 400, 401, 820, 830, 1020, 1520, 1530, 2020, 2630 all with swept back axle), (2030 SN# up to 187300 with swept back axle), (2040, 2240 SN# up to 349999 with swept back axle), (2440, 2640 SN# up to 308804 with swept back axle). (Part No: AT19794) $227.52

Bellcrank - Includes AR92945 Pin. For (1020, 2020 all with 60"-88", 48"-80" or 58"-92 1/2" Straight Adj. Front Axle) 1520 with 48"-60" or 60"-88" Straight Adj. Front Axle, 1530 with Extra Wide Front Axle, 2240 with 60-88" or 58"-76" Straight Adj. Front Axle, (2440, 2640 all SN# less than 308804 with 60"-88" or 58"-76" Straight Adj. Front Axle), 2630 with 60"-88" Straight Adj. Front axle. Bellcrank marked R70764. (Part No: AR92945) $201.09

Center Steering Arm Pin - Please check dimensions before ordering. Pin is 5.690" long X 1.499" diameter. For models 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 820, 830. Center Steering Arm Pin. Used with Center Steering Arms: AR91812, AR92945, AR91811 and AR92944. (Part No: 91811S) $36.49

Drag Link Assembly - A= 40.750", B= 1.062", ball joint ends are rotated 90 degrees. For models JD401, 2020, 2030, 2440, 2630, (2640 SN# up to 340999). (Part No: AR91711) $74.25

Hub - For models JD300, JD301, JD400, JD401, 1020, 1120, 1520, 1530, 2010, 2020, 2030, 2040, 2120, 2240, 2630, 2640, 302, 820, 830, 920, 2440 SN# under 340999. Hub, 6 Bolt. Uses Wheel Bolt #WB916 9/16-18 x 1.69" $70 for quantity of 10. (Part No: T25809) $56.83

Hub, Front Wheel, 6 bolt - Fits: 1020, 1520, 1640, 1840, 1950N, 2020, 2030, 2040, 2040S, 2150, 2155, 2250, 2251N, 2350, 2355N, 2440, 2450, 2510, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 300B, 300D, 301A, 302, 302A, 3040, 310 (SN# 237997 & below), 3130 (SN# 186270 & above), 3140, 3150 (STD Duty), 3230, 3350 (Std Duty), 4000 (SN# 201000 & above), 401B, 401C, 4020 (SN# 201000 & above), 4030, 4040, 4230, 4240, 4430, 6403, 7405, 300, 301, 310, 380, 400, 401, 480, 480A, 480B. Note: This hub uses a press in cap part# R50992 available only from John Deere (Part No: R49839) $65.83

Spindle LH/RH - Shaft length 15.312", Shaft diameter 1.375" spindle inside bearing flat 1.375", spindle outside bearing flat 842" REPLACES : AR52860. Fits 1020, 1520, 1530, 2020, 2030, 2240, 2440 (< SN# 340999), 2630, 2640 (< SN# 340999), 2755. Wheel Bearing kit available separately p/n WBKJD3. (Part No: AR103471) $163.50

Spindle LH/RH - A = 14.875", B = 1.5", C = 1.795", D = 1.312". Fits : 1020 (HD), 1520 (hi-knee), 2020(hi-knee), 2030(hi-knee), 2440 (< SN# 340999), 2630 (hi-knee), 2640 (< SN# 340999). Wheel Bearing kit available separately p/n WBKJD7_. (Part No: AR67416) $384.41

Spindle LH/RH - A = 11.500", B = 1.500", C = 1.795", D = 1.312". Fits 1020 (medium knee), 1520 (medium knee), 2020 (medium knee), 2030 (medium knee), 2440 (< SN# 340999), 2630 (medium knee), 2640 (< SN# 340999). Wheel Bearing kit available separately p/n WBKJD7_. (Part No: AR67417) $323.59

Steering Arm Pin, Center - 1.249" dia., 5.230" long. For models 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 820, 830. (Part No: 93358S) $34.60

Steering Arm, LH - For models JD300, JD301, JD400, JD401, 1120, 1140, 1630, 1641F, 2120, 2150, 2255, 840, 920, 930, (1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2355N, 2440, 2630, 2640, 820, 830 all with swept front axle), 1030, 1040. (Part No: T21518) $132.77

Steering Arm, RH - For models JD300, JD301, JD400, JD401, 1120, 1140, 1630, 1641F, 2120, 2150, 2255, 840, 920, 930, (1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2355N, 2440, 2630, 2640, 820, 830 all with swept front axle), 1030, 1040. (Part No: T21517) $131.44

Steering Wheel - Steering wheel, 16 1/2 diameter, 7/8" splined hub, smooth finish. Tractors: 820 Germany, 830 Germany, 2040 to serial number 349999, 2240 to serial number to 349999, 2520, 2630, 2640, 3020 serial number 123000 & up, 4000, 4020 serial number 201000 & up, 4030, 4040, 4230, 4240, 4430, For 2040, 2240, 2520, 2630, 2640, 3020, 4000, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 820, 830, 8430, 8440, 8630, 8640, 9400, 9500, 9600 (Part No: T22875) $53.33

Steering Wheel - 16-5/8" dia. 7/8 splined hub, textured finish. For models 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2520, 2630, 2640. (Part No: AL28457) $43.95

Steering Wheel - 16-5/8" dia. 7/8 splined hub, smooth finish. For models 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2520, 2630, 2640. (Part No: AL28457-S) $52.00

Tie Rod Assembly - For models (1020, 1030, 1040, 1130, 1140, 1520, 2020, 2030, 2630 with straight axle 48"-80"), (1530 with straight axle and 38" rear tires), 1630, 1640, 2120, (2240 SN# up to 349999 with straight axle and 38" rear tires), (2440, 2640 with straight axle 53"-79"), 840, 940, (JD301, JD401 with straight axle). (Part No: AR54637) $209.41

Tie Rod Outer - Tie rod tube, 12.25 long, .781 wide, 11 notches for outer drilled tie rod end. For adjustable front axles except 88 wide or power drive. Tractors: 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230 low profile, 4320. For 1020, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640, 820, 830 (Part No: AT23885) $39.75

Tie Rod Tube - 17.140" long, .750" I.D., 1.00-16 O.D. thread. For models 1020, 1520, 1530, 2020, 2030, 2240, 2440, 2630, 2640. (Part No: T22952) $45.48

Tie Rod Tube - 11.156" long, .812" I.D., 1.125"-12 O.D. thread. For models 820, 830, 840, 920, 930, 1020, 1030, 1040, 1120, 1140, 1350, 1530, 1550, 1750, 1950N, 2020, 2030, 2040, 2150, 2155, 2240, 2355N, 2440, 2630, 2640, 2855N, 301A, 302, 401B, (JD300, JD400 SN# 118105 and up), JD301, JD401. (Part No: T25901) $18.91

Tie Rod Tube - 12.218" long, .812" I.D., 1.125"-12 O.D. thread. For models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1850, 1950, (2020 with swept back axle), 2030, 2120, 2150, 2155, 2240, 2250, 2350, 2355, 2550, 2555, 2630, 2640, 2755, JD301, JD401. (Part No: T29109) $32.93

Tie Rod, Inner - Inner Tie Rod. Dimensions A-5.000 inch B-1.125 inch I. D. thread For JD JD300, JD301, JD400, JD401, 1020, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1641F, 1840, 2020, 2120, 2150, 2240, 2255, 2440, 2630, 2640, 301A, 302, 401B, 820, 830, 840, 920, 930, 940 tractors (Part No: AT27130) $44.91

Tie Rod, Inner - Inner Tie Rod. Dimensions A-5.000 inch B-1.000 inch I.D. thread For JD300, JD400, 1020, 1520, 1530, 2020, 2030, 2240, 2440, 2630, 2640 tractors. (Part No: AT23886) $61.56

Tie Rod, Outer - Long Outer Tie Rod. 15 grooves. Dimensions A-17.250 inch b-.750 inch. For models JD 1020, 1520, 1530, 2020, 2030, 2240, 2440, 2630, 2640. (Part No: AT23583) $38.41

Tie Rod, Outer, 13 Notch - A= 14.509", B= .781". For models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 2020, 2030, 2120, 2240, 2440, 2630, 2640, JD301, JD401. (Part No: AT27134) $34.70

Wheel Bearing Kit - For 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2630, 2640, 820, 830, (2440 SN# up to 340999). Wheel Bearing Kit for 1 wheel. Kit contains 1 each of the following p/n LM48548(Cone), LM48510(Cup), M12649(Cone), M12610(Cup), AT10344(Seal has 1/075 I.D.). (Part No: WBKJD3) $19.90

Wheels
Bearing Cone - For models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 5010. (Part No: M88048) $16.92

Bearing Cone - For models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4430. (Part No: JD8913) $18.22

Bearing Cone - For models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 5010. (Part No: TP-JD8929) $16.92

Bearing Cone - For models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4430. (Part No: 25577) $21.66

Bearing Cup, Rear Wheel - For models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4430, 5010. (Part No: TP-JD7445) $9.60

Front Wheel Bearing Kit - Front Wheel Bearing Kit. Kit contains one each: LM48510(Cup), LM48548(Cone), M12610(Cup), M12649(Cone), AT10344(Seal). For models 820 Mannheim prior to serial number 042924~ 830 Mannheim with T25809 hub~ 1020 and 1520 except Heavy Duty axle on Hi-Crop and Row Crop~ 2010 except low profile Row Crop, 2020~ 2030 except Heavy Duty axle, 2040 with T2580 For 1020, 1520, 2010, 2020, 2030, 2040, 2240, 2630, 2640, 820, 830. Repairs one wheel. (Part No: FW155S) $24.14

Front Wheel Bearing Kit - Wheel bearing kit. For 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4430. Kit Contains: 25521(Cup), 25577(Cone), M88010(Cup), M88048(Cone), AR26480(Seal), R26632(Seal Retainer), A1556R(Axle Cap Gskt). Repairs one wheel. (Part No: FW157S) $44.52

Front Wheel Nut & Bolt Set - For 1020, 1420, 1520, 1530, 1550, 1650, 1750, 180, 1850, 1950, 2020, 2030, 2150, 2155, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2840, 2855, 2955, 3010, 3020, 3055, 400, 4000, 4020, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 5244, 4320, 4430, 4440, 4450, 4455, M. Front Wheel Nut & Bolt Set of TEN 10. Bolts are 9/16 Inches x 1 1/2 inches. Zinc Plated Nuts. (Part No: WB916-bolt_nuts) $39.95

Wheel Bearing Kit - For 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4320. Wheel Bearing Kit for 1 wheel. Kit contains 1 each of the following p/n 25577(Cone), 25521(Cup), M88048(Cone), M88010(Cup), 23342(Seal), R26632(Seal Retainer). (Part No: WBKJD6) $37.50

Wheel Bearing Kit - For 1020, 1520, 1640, 1840, 2020, 2030, 2040, 2040S, 2150, 2155, 2250, 2350, 2355, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 300, 301A, 302A, 3040, 310B, 3140, 3230, 400, 401, 4030, 4230, 440, 480A, 480B, 62140, (3150, 3350 all standard duty), 300B 310A after SN# 237998, 2855 with swept back, 310 with SN# below 237997, 3130 with SN# above 186270. Wheel Bearing Kit for 1 wheel. Kit contains:25590(Cone), 25520(Cup), M88048(Cone), M88010(Cup), 23342(Seal), R26632(Seal Retainer). (Part No: WBKJD7) $47.53



Brakes
Brake Rivet Tool - Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1/4" throat, 1/8" dia. rivet punch. (Part No: RIVET_TOOL) $35.25

Brake Rivet Tool, Large - Larger version of our Brake rivet tool. 3-3/8" deep throat x 2-1/8" high throat. Includes 1 punch for brake shoe rivets and 1 punch for clutch pulley brake. (Part No: LGRIVET) $89.00

Cooling System
Magnetic Block Heater - Universal. 115-120 AC, 180 watts, draws 2 amp maximum. Surface area 2-3/4 inches x 3-3/4 inches, delivers 300-400 degrees surface temperature. (Part No: MBH1153) $56.70

Decals and Emblems
2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 3 1/2" x 4" black & silver, vinyl cut. (Part No: R4697) $9.30

2 Legged Deer Decal - John Deere Leaping 2 Legged Deer, 2 1/2" x 3", black & yellow, vinyl cut. (Part No: R4696) $9.30

2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 2" x 2 1/2", black & yellow, vinyl cut (Part No: R4695) $9.30

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Part No: R5186) $15.50

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Part No: R5187) $15.50

2 Legged Deer Decal - John Deere leaping 2 legged deer, 9" yellow with black deer on vinyl. (Part No: R5188) $25.94

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with silver deer on vinyl. (Part No: R5189) $15.50

4 Legged Deer Decal - "John Deere Quality Farm Equipment" 10" on vinyl. (Part No: R5184) $31.92

4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Part No: R5185) $31.92

Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Part No: JDL2Y) $14.60

Drive Train
Lucas Hub Oil (quart) - Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Part No: LU10088) $9.06

Electrical System
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. NOTE

Alternator Base Bracket Kit - Universal - Universal base bracket mounting kit. For converting from a generator to an alternator . Contains: brackets, bolts, washers, nuts & Basic Instructions. (Part No: 2348258) $39.25

Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 8NE10305SE) $106.29

Coil Bracket - Universal Coil Bracket (Part No: R1940) $6.61

Coil, High Performance (Black), 12 Volt, Oil Filled - Pertronix Flame Thrower heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40511) $35.99

Coil, High Performance (Black), 6 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix 'Flame Thrower' Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40111) $39.21

Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. (Part No: 40011) $32.82

Coil, High Performance (Chrome), 12 Volt, Oil Filled - 12-VOLT, Pertronix 'Flame Thrower' Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40501) $35.99

Coil, High Performance (Chrome), 6 Volt, Oil Filled - 6-VOLT, Pertronix 'Flame Thrower' Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40001) $36.89

Coil, Ultra High Performance (Black), Oil Filled - Pertronix 'Flame Thrower II' Black, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45011) $35.25

Coil, Ultra High Performance (Chrome), Oil Filled - Pertronix 'Flame Thrower II' Chrome, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system using "Ignitor II". Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45001) $39.68

Distributor Cap, Wico - For All models using Wico distributor, clip type cap. (Part No: AT14190) $42.21

Magneto Cap, 2 Cylinder - For models using WICO XH magneto ONLY. (Part No: 1006501) $61.65

Magneto, Wico XH & XHD, Service & Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Part No: MAG6) $14.25

Solenoid, 6 Volt - 3 terminal, Delco starters 1107466, 1107474. (Part No: DR1465) $19.98

Spark Plug - Extended tip, 14mm thread, 3/4" reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65) $3.64

Spark Plug - Extended tip, 14mm thread, 3/8" reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85) $3.64

Spark Plug Wire Set, 4 Cylinder, Universal - For use with Ignitor II high performance electronic ignition conversion kits. (Part No: S.66442) $14.48

Spark Plug Wire Set, Universal, 4 Cyl. - Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. Made in the USA. (Part No: CPN12259) $17.22

Spark Plug Wire Set, Universal, 6 Cyl. - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260) $20.02

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651. NOTE

Starter, Generator Tag, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO12) $14.40

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO6) $14.40

Voltage Reducer with Bracket - 12 volt to 6 volt. (Part No: S.52671) $11.82

Engine Gaskets
Silicone Black RTV - Permatex black RTV silicone adhesive sealant. Provides a waterproof seal around metal, glass, rubber. Designed for indoor or outdoor use, 3 oz. tube. (Part No: PRM16BR) $7.14

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, Oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 F to +500 F, 3.35 oz. tube. (Part No: PRM77BR) $7.86

Silicone Copper RTV - Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicones. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75 F to +700 F, 3 oz. tube. (Part No: PRM101BR) $11.78

Engine Rebuild Kits
Lucas Assembly Lube - Lucas Assembly Lube (4 oz). Designed to be used as an initial lubricant to metal surfaces. It mixes with any oil and will not plug filters. This product clings to all surfaces and is an excellent rust inhibitor, allowing long term storage for all parts. Its useful wherever tension or torque is applied. Key Benefits are: Use to pre lube camshaft, bearings, lifters and valve train. Prevents seizing, galling and scuffing perfect for engine lding, super slick and tacky, easy to use, excellent rust inhibitor, excellent for long term storage, contains Zinc, Moly and other extreme pressure additives for maximum protection during engine break-in. (Part No: 10152) $6.71

Engine Parts
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). NOTE

Engine Pistons and Sleeves
Piston Groove Cleaner - For pistons up to 5 1/2 inches. Cleans grooves of 5/64, 3/32, 1/8, 5/32 and 3/16. (Part No: B1SB9055) $24.95

Piston Ring Compressor - Ratchet mechanism with square drive tool to adjust diameter and enlarged crimped edge to prevent compressor from entering cylinder. Depth 6 1/2 inches. Range 3 1/2 to 7 inches. (Part No: 900521) $35.67

Ridge Reamer - Heavy Duty Ridge Reamer. Removes ridges from the top of the cylinder to achieve smooth wall surface on engine bores from 3 to 5 inches. Tungsten carbide blade is reversible for long life. (Part No: 500560) $63.87

Engine Rings
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32"). NOTE

Exhaust System
Chrome Exhaust Stacks - Universal. Available from 2 to 5 inch inside Diameter. 48 to 53 inch length. Curved top on all sizes. Extended curver available on some sizes. Priced from $69.95. Single wall construction. Chrome Exhaust Clamps are $5.00 each when ordered with a pipe. Call for pricing for the size you need 800-853-2651 NOTE

Rain Cap - This rain cap is for a 2.50 inch pipe. (Part No: R1802) $9.80

Fuel System / Air Intake
Choke Cable - Universal choke cable 72 inches long, 7/16 inch thread dia. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: CC72) $15.22

Fuel Filter, In-Line, 1/4 inch - Inlet 1/4, outlet 1/4, O.D. 1-29/32, length 4-1/16. (Part No: 6511393) $6.92

Fuel Filter, In-Line, 3/8 inch - Inlet 3/8, outlet 3/8, O.D. 1-29/32, length 3-7/8. (Part No: BF836) $6.28

Fuel Filter, In-Line, 5/16 inch - Inlet 5/16, outlet 5/16, O.D. 1-29/32, length 4-5/32. (Part No: BF840) $6.22

Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043) $29.99

Fuel Tank Liner Kit - Works on all metal gas tanks, use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259) $65.00

Fuel Tank Repair Kit - Permanent hole and crack repair for metal fuel tanks in 30 minutes. Kit includes instructions and materials needed to fix cracks up to 4" long and holes up to 3/8" in diameter. NOT for plastic fuel tanks. (Part No: FTR180) $27.62

Fuel Tank Webbing, 3 Ft - Black woven nylon type material, .042" thick, 3 foot section. (Part No: FTW494) $8.38

Lucas Fuel Treatment (quart) - Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Part No: LU10003) $9.97

Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8" diameter, 2.150" O.D., Made in the USA. (Part No: C1778R) $1.50

Gaskets
Gasket Material, Cork Rubber - 3/32" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR332) $10.95

Gasket Material, Cork Rubber - 1/16" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR116) $13.75

Gasket Material, Exhaust Manifold - 1/16" thick x 12" wide x 28-1/2" long. Perforated steel core to make manifold gaskets. (Part No: GSKEM1228) $19.95

Gasket Paper, .0160 - .0160" x 18" x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1844) $14.90

Gasket Paper, .0275 - .0275" thick x 18" wide x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1898) $22.90

Gauges
Hour Meter - DC voltages from 12V thru 36V nominal. Heavy duty glass-reinforced polyester body. Internal shock shields & grommets protect movement from shock & vibration damage. Fits 2-1/4" opening, three(3) mounting screws with nuts and two(2) blade terminals included. (Part No: HM771) $43.69

Hourmeter, Analog - 2", black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672) $38.40

Oil Gauge Copper Line Kit - Universal, for tractors using 1/8 x 6 ft. copper oil line. Includes 6 Ft 1/8 Line, 2 x 5/16 -24 UNF Nuts, 2x Compression sleeves, and a 1/8-27 NPTF Female to 5/16-24 UNF male adapter. (Part No: UNI523) $22.75

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8" pipe thread to 1/8" tube. Brass. (Part No: 919095) $14.35

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8" pipe thread to 1/4" tube. Brass. (Part No: IHS626) $14.35

Oil Pressure Gauge - Universal Complete assembly with oil tube and mounting hardware, Lighted. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Part No: SSW0002) $15.95

Temperature Gauge - Universal water Temperature gauge(0-280 degree scale). Fits model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1/2 inch or 3/4 male adapter, engine block or radiator threaded hole. (Part No: 1042944) $23.85

Temperature Gauge, Universal - For 2" mounting hole. Complete assembly with bracket and adapters for block. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77" capillary line. Fits all liquid cooled engines. (Part No: UTG50) $25.30

Hitch / Drawbar
Center tube, Stablizer - Center tube for SK102CH stabilizer kit. (Part No: SK102CH-CT) $17.62

Check Chain & Pin Kit - Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Part No: CBPN598A) $7.96

HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire dia 3/16, length 3.75), four(4) of HP-4 (wire dia 5/32, length 2 15/16), four(4) of HP-5 (wire dia 1/8, length 2 9/16), and three(3) of HP-6 (wire dia 3/32, length 1 5/8). (Part No: HPA15X) $6.94

HITCH BALL 10000LB 2-5/16 - 2-5/16 BALL SIZE, 1-1/4STUD THREAD, 2-1/2 STUD LENGTH, 10000 LB MAX LOAD CAPACIRY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516114) $23.85

HITCH BALL 15000LB 2-5/16 - 2-5/16 BALL SIZE, 1-3/8STUD THREAD, 2-5/8 STUD LENGTH, 15000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516138_) $23.40

HITCH BALL 2000LB - 1-7/8 BALL SIZE, 3/4 STUD THREAD, 1-3/4 STUD LENGTH, 2000 LB MAX LOAD CAPACIRY, ONE CHROME HITCH BALL CLASS. (Part No: CHB17834) $12.30

HITCH BALL 3500LB - Hitch ball. 2" ball size, 3/4" stud thread, 1-7/8" stud length, 3500 lb. max load capacity, one/two chrome hitch ball class. (Part No: CHB234) $12.64

HITCH BALL 5000LB - Hitch ball. 2" ball size, 1" stud thread, 2-1/8" stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21) $14.44

HITCH BALL 5000LB 2-5/16 - Hitch Ball, 2-5/16" ball size, 1" stud thread, 2" stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161) $20.52

LINCH PIN - Package of 10 linch pins. Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP14) $4.90

LINCH PIN - Package of 10 linch pins. Pin diameter 5/16 inch, useable length 1 1/4 inch, Ring diameter 1 5/8 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP516) $4.00

LINCH PIN - Package of 10 linch pins. 7/16" dia. pin x 1-3/4" useable length, 1-5/8" dia. ring. Enter 1 for package of 10. (Part No: DKLP91) $3.90

LINCH PIN - LINCH PIN Package of 10 linch pins. 3/16" O.D. pin x 1-1/4" Long.***Enter 1 for package of 10** (Part No: DKP316) $3.90

Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8" mounting pins and adapter bushings, 27-1/4" width, 3-1/2"x 3-1/2" beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HF141101) $284.34

Universal Drawbar Lock - For CAT I drawbars only (drawbars that are 1" thick x 2-1/2" width) . Prevents drawbar from rotating. (Part No: 49A29) $26.72

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: DBL2) $27.98

Universal Stabilizer Chain Kit - Chain stabilizers, Turnbuckle & chain links adapt to any size 3-point hitch - usually used on larger tractors - VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed & sold in pairs, less brackets. (Part No: SK102CH) $47.67

Hydraulic System
Hydraulic Parts, Universal - Universal hydraulic parts such as hoses, filters, pressure gauges etc.. can be found in the Accessories and Universal parts section. (Part No: Hydraulic_Parts) $00.00

Implements
AXLE BOLT - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317) $18.22

AXLE NUTS (5) - 5 Pack of Axle Nuts. Enter 1 for pack of 5. (Ref 4) Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 15622BH) $1.58

BLADE BOLT KIT - For rotary cutter blade used on rotary cutters. Please verify dimensions before ordering: A = 1 1/8-12 inch, B = 3 1/2 inch, C = 1 3/8 inch, D = 1 inch, E = 9/16 inch, F = 1/2 inch, G = 2 1/2 inch, H = 1.492 (for 1 1/2 Blade Hole), I = 1.12 inches. Contains (BH2500) hardware for 2 blades. (Part No: 63607) $16.66

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 170BH) $2.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 22) $8.28

Bush Hog Axle Spacer Bushing - Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: SPB40) $6.44

Caster Assembly - Tail wheel & hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2" diameter, 8" overall length, 7-1/4" to pin hole. New Style Tail Assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269) $172.49

Caster Assembly - Tail wheel & hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2" diameter, 8" overall length, 7-1/4" to pin hole. New Style Tail Assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269) $172.49

Caster Assembly, Old Style - Tail wheel & hub assembly with grease fitting. 4 x 8 inch rim, 15 inch O.D. of wheel. Includes Wheel, Hub, Axle Bearing, and Bolt Assembly.OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: BH215) $103.86

Graphite Lubricant - Dry Graphite Powder, 5 lb container, used to lubricate planter seed channels. Recommended application rate: 2 oz per box. Typically treats 25-30 acres. (Part No: TP99500GP) $27.92

HUB with BRG CUPS - 4-bolt, 5" bolt circle & 3-5/8" wheel pivot hub with bearing cups (1" axel)(Ref #5). This part fits Caster Assembly (Part Number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1311) $44.15

Hub Assembly - Hub with bushings (3/4"), wheel bolts (4), and grease fitting. Center tube length 5". For rotary cutters: RB60 with new style 1-1/4" dia. caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH) $34.53

Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 221129) $40.23

Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Part No: 241100) $75.38

Round Bale Tine 43 Inches - Fully Hardened. (Part No: 241166) $95.34

Round Bale Tine 49 Inches - Fully Hardened. (Part No: 241162) $98.19

Round Bale Tine 55 Inches - Fully Hardened. (Part No: 241163) $107.04

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 30BH) $5.20

Tail Wheel Assembly - 6" x 9" tail wheel assembly with laminated tire, less hub. 4" pilot, 5 bolt holes, 5-1/2" bolt circle. 5-1/4" wide, 21" O.D., 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294) $125.98

Tail Wheel Assembly - 4" x 8" tail wheel assembly with laminated tire. 3-5/8" pilot, 4 bolt holes, 5" bolt circle, 3-3/4" wide, 15" O.D. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 & 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Part No: 500BH) $42.90

Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: TP19000TP) $21.27

Lights
Halogen Work Light-Double Bulb - 12 volt lamp assembly, flood pattern, double bulb 55 watt halogen. Includes replaceable 55 watt halogen bulb. (Part No: L982-12V) $48.63

Magnetic worklight Universal Mounting. - Can be placed anywhere there is a metal surface. 3-1/2" x 6" weather resistant steel body (black), glass lens, flood pattern, 140 ft. beam. Halogen bulb, 12 V, 55 watt, replaceable. 12 ft. cord with cigarette lighter plug. (Part No: L100MAG) $41.70

Portable Halogen Work Lamp - 3" x 5" sealed beam unit, 12 V, 50 watt, 4 amp. With handle & magnetic base. Projects flood beam pattern 50 ft. wide x 30 ft. long. Lamp is not legal for street use. (Part No: L200MAGH) $72.05

Safety Light Amber - 12 volt Amber Safety Light, 4 and a 1/4 dia., 3/8Dia by 5/8 mounting Stud.Does not include Flasher. (Part No: S.61357) $23.90

Universal 9 Inch Headlight - 12 Volt off-road 100w Q. Halogen large headlight. Black. Single bolt mount. (Part No: B1585) $61.13

Work Lamp, HID, Flood Light - Universal high intensity discharge flood light, 35W Xenon H3 lamp, size 4.725" W X 4.330" H X 5.512" L, internal ballast, hardened glass lens, far longer life span than halogen 3000 to 3500 hours versus 280 to 400, higher lumen output 3200 lumens versus 700-1000 for halogen bulbs. (Part No: WL8500-E) $120.44

Work Light 12V With Switch - Work light, 12 volt, 3000 candle power, trapezoidal light pattern. On-off switch on back of light housing. Uses 4-1/2" diameter sealed beam lamp, L4411. (Part No: L408-12V) $28.08

Work Light 12V With Switch - Work light, 12 volt, 3000 candle power, trapezoidal light pattern. On-off switch on back of light housing. Uses 4-1/2" diameter sealed beam lamp, L4411. (Part No: L408-12V) $28.08

Worklight 12 Volt - Red 12 Volt worklight with handle, on/off switch, swivels and rotates. (Part No: S.42792) $29.93

Worklight 12 Volt Black - 12 Volt worklight with handle, on/off switch, swivels and rotates. Mounting Holes measure 4 3.8 center to center. (Part No: S.67771) $31.65

Miscellaneous
Cab Foam Kit - With Headliner 7-Piece - Black For models with 1300 Series Hiniker Cab (Part No: R1235) $317.90

Cab Foam Kit - With Headliner 10-Piece - Black For models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: R1236) $330.43

Cab Foam Kit - 7-Piece - Black For models with Hinson Cab. (Part No: R3247) $317.90

CabCAM Camera Observation System - When you need extra visibility around the farm or out in the field, a versatile camera observation system can give you the edge you need. Improve visibility at night with the twenty-eight infrared illuminator camera for excellent night vision. Reduces the need to turn around to check equipment. CabCAM Observation Kit Includes: Camera: Waterproof, CCD Color with Audio, 28 Infrared Illuminators Allow up to 32 feet of Visibility, Image Mirroring Function, Made to Withstand Off road Conditions. Monitor: 7 Color TFT LCD, Embedded Control Box for Direct Power Input for Cameras, AV2 Video Input for DVD/VCR etc., AV1 and AV3 Video Input to Hook Up to 3 Cameras. Accessories: AV Conversion Cable, Ball Swivel Mount Bracket with Adjustable Mounting Pad, Power Supply Cable, Earphones, Backshield, Cigarette-Lighter Power Adapter, Remote Control, Sunshield, AC Power Adapter, 20' and 65' Weatherproof Extension Cables. (Part No: CC7M1C) $339.62

Canopy - 60" wide x 65" long, moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through moulding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold seperately.Add additional $150.00 to shipping due to weight and size, this item is shipped by truck. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257X) $402.16

Canopy Mounting Kit, 2 Post - Mounts the canopy to your 2 post ROP frames except Hoop Type Frame. We need the measurement of the top of the ROP and the size of the ROP Tubing used. Put sizes in the comments section of the order form. (Part No: B6603) $70.84

Canopy Mounting Kit, 4 Post - Mounts the canopy to any 4 post ROP frame. (Part No: B6604) $61.16

Canopy Mounting Kit, Hoop Type - Mounts the canopy to CURVED OR SQUARE TOP Hoop Type ROP Frames up to 52" wide with leg thickness up to 4" x 2". (Part No: B6602) $103.07

Canopy, Small Tractors - 45" Wide x 60" Long Moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through moulding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold seperately. Add additional $150.00 to shipping due to weight and size, this item is shipped by truck. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257XSTD) $350.00

Deluxe Canopy, 3 Bow - Red. 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approx 31 inch. (Part No: RFC100R) $220.12

Deluxe Tractor Umbrella - Deluxe Umbrella comes with universal mounting bracket. Four spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework. Frame constructed of tubular steel. All metal parts are zinc plated for rust resistance. 54 inch square cover is made of durable polyester material. Each corner is double reinforced. AVAILABLE IN RED, YELLOW, ORANGE, WHITE or BLUE. State color desired in comments section of order form when ordering. (Part No: TU56-X) $145.07

HAND CLEANER GALLON - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Part No: PRM25218) $24.48

Oil System
Lucas Heavy Duty Oil Stabilizer (quart) - A pure petroleum multi-use oil supplement. Controls noise, heat and wear in manual transmissions and differentials. Number one in the heavy duty and high performance industries. Lucas Oil Stabilizer is a 100% petroleum product formulated to eliminate dry starts and reduce friction, heat and wear in any type of engine. It allows motor oils a higher degree of lubricity which reduces oil consumption and operating temperatures. Use Lucas Oil Stabilizer in gear oil to stop leaks, reduce operating temperatures and increase the life of the gear oil. Since it is pure petroleum. Key Features Increase oil life at least 50% longer, Reduces oil consumption, Eliminates dry starts, Raises oil pressure, and Increases power and miles per gallon. (Part No: LU10001) $12.93

Oil Pump Shaft - Late style without keyway. For All Models SN# up to 214999 with 6.404D early power booster 6 cyl engine. (Part No: R64568) $106.70

PTO / Driveline
Driveline Assembly - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor and implement yokes. 1333mm (52-1/2 inch) overall length, end of yoke to end of yoke. 1110mm (43-3/4) compressed length center to center of cross bore. Cross and bearing kit is 27mm 1.063 (1-1/16) bearing diameter x 74.6mm 2.940 (2-15/16). 1333mm (52-1/2 inch) overall length. ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY138) $164.92

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor & implement yokes. 1-3/8 6 spline Q.D. tractor yoke. 1-3/8 round bore with 1/2 pin hole implement yoke. 1300mm - (51 inch) overall length end of yoke to end of yoke. 1110mm (43-3/4) compressed length center to center of cross bore. Cross and bearing kit, 27mm - 1.063 (1-1/16) bearing dia. x 74.6mm - 2.940 (2-15/16) overall length (43-3/4) . Verify length before ordering. (Part No: AB4111WY) $183.74

Driveline Assembly with Yokes - AB4 series. Complete drive shaft assembly with shielding and tractor & implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-1/4 round bore with pin hole implement yoke. 1350mm (53) overall compressed length end of yoke to end of yoke. Cross and bearing kit, 27mm - 1.063 (1-1/16) bearing dia. x 74.6mm - 2.940 (2-15/16). Overall length 1350mm (53) ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY125R) $181.20

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 - 6 spline Q.D. tractor yoke, 1-3/8 - 6 spline ratcheting torque limiter iwth quick disconnect on implement end. 1372mm (54 inch) overall length end of yoke to end of clutch. 1110mm (43-3/4) compressed length center to center of cross bore. Cross and bearing kit 27mm -1.063 (1-1/16) earing dia. x 74.6mm - 2.940 (2-15/16). 1372mm (54) overall length ***VERIFY LENGTH BEFORE (Part No: AB4111K33) $278.82

PTO Safety Clutch, 40 HP - 1-3/8" 6 spline male and female ends, 6" dia., 40 HP capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Part No: B9164) $210.57

Paint
44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Part No: JDV-02250) $24.00

Acrylic Hardener, 16oz - Lead free. For alkyd gloss tractor and implement enamel. Improves initial dry time and hardness development. Use with slow dry alkyd base tractor and implement gloss enamel. Not compatible with fast dry enamel or other paints. Mixes 1 to 2 gallons of unreduced paint. (Part No: TP12P) $44.60

Acrylic Hardener, 8oz - Lead free. For alkyd gloss tractor and implement enamel. Improves initial dry time and hardness development. Use with slow dry alkyd base tractor and implement gloss enamel. Not compatible with fast dry enamel or other paints. Mixes 2 quarts to 1 gallon of unreduced paint. (Part No: TP12HP) $27.96

Dakota Prep & Shine, Twin Pack - Kit inlcudes (1) 16.oz bottle Dakota Prep with spray nozzle, (1) 16 oz. aerosol can Dakota Shine, (2) scrub pads (1) light, (1) aggresive. (Part No: DS2PK) $38.48

Dakota Prep, 1 Gallon - Dakota Prep is a water-based and biodegradable cleaner that will remove wax buildup, grease, oxidation and grime from a variety of surfaces to renew paint to its previous luster. It is safe on many surfaces including painted surfaces, decals/vinyl lettering, plastics, fiberglass, clear coat finishes, aluminum, glass and rubber. (Part No: DP1G) $83.37

Dakota Shine, 1 Gallon - Dakota Shine is a unique and patented product that will restore the color, lustre and value to faded and oxidized surfaces like paint, decals, plastics, fiberglass, engine compartments and more. The ingredients are designed to penetrate the surface to rejuvinate the pigments to their original, lime-new appearance. No mixing required, quick dry time and no overspray lines to buff out. Used in conjunction with Dakota prep for best results. (Part No: DS1G) $138.26

Paint, Aluminum, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312GAL) $42.53

Paint, Aluminum, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312QT) $24.74

Paint, Aluminum, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312SP) $42.52

Paint, Classic Green, 1 Gallon - For 2 cylinder JD, from TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP215GAL) $52.46

Paint, Classic Green, 1 Quart - For 2-cylinder JD, from TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP215QT) $29.86

Paint, Classic Green, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** For 2 cylinder JD From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP215SP) $42.52

Paint, Clear Coat, 1 Gallon - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447GAL) $71.91

Paint, Clear Coat, 1 Quart - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447QT) $29.91

Paint, Clear Coat, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447SP) $51.68

Paint, Gloss Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP550GAL) $42.24

Paint, Gloss Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP550SP) $42.52

Paint, Gray Primer, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700GAL) $42.24

Paint, Gray Primer, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700QT) $18.69

Paint, Gray Primer, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700SP) $42.61

Paint, Green, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP210GAL) $50.00

Paint, Green, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP210QT) $29.92

Paint, Green, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP210SP) $51.84

Paint, Industrial Yellow, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP530GAL) $86.00

Paint, Industrial Yellow, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP530QT) $34.05

Paint, Industrial Yellow, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP530SP) $51.68

Paint, JD Yellow, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP190GAL) $42.53

Paint, JD Yellow, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP190QT) $24.74

Paint, JD Yellow, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.*** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP190SP) $42.52

Paint, Satin Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225GAL) $45.50

Paint, Satin Black, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225QT) $25.92

Paint, Satin Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225SP) $42.52

Paint, Soft Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP200GAL) $53.93

Paint, Soft Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP200SP) $42.52

Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116GAL) $65.92

Slip Resistant Coating - Quart can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 19 to 25 square feet. (Part No: BL116QT) $27.81

Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116KIT) $95.63

Tire Paint, Black - Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is a concentrate which you dilute one-to-one with water. A little goes a long way! (Part No: E844Q) $21.00

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R) $39.95

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R) $39.95

Seats
Pan Seat, Universal - 17 inch wide Gold zinc plated, 3-1/2" center to center on mounting holes, 1/2" by 1/2" center square. (Part No: B1865) $37.24

Seat Belt - Universal Seat Belt. Can be adapted to many tractors. (Part No: RSB22) $75.84

Seat Belt, Universal - Seat belt, universal 2-point static adjustable belt. Fits TS1110 seats. (Part No: TS1110BELT) $23.10

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up & angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Part No: TS5056V) $1294.75

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056) $1405.98

Seat, Industrial - Seat assembly. Durable one-piece stamped steel pan. (Yellow) Leatherette upholstery, Dimensions: 18" W, 19" H, 21" D. (Mounting holes 9" W x 9-3/4" D). Fits several Commercial Turf/Mowers, Utility trucks, Fork Lifts, Skid Steer Loaders, Pavers, Sweepers, Construction Equipment, Utility tractors, Row crop tractors, Loader backhoes, Etc. (Part No: TS1110INDY) $98.77

Seat, Universal - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is Black. (Part No: TS1050ATSP) $101.46

Seat, Universal - BLUE Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLUE. (Part No: TS1060ATSP) $93.40

Seat, Universal - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLACK. (Part No: TS1075ATSP) $93.40

Seat, Universal - Seat assembly, Black leatherette upholstery, Dimensions: 18-3/4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward/rear adjustment (Slide track 9 inches W x 11-1/4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110BK) $106.23

Seat, Universal - Seat assembly, Blue leatherette upholstery, Dimensions: 18-3/4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward/rear adjustment (Slide track 9 inches W x 11-1/4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110BL) $109.62

Seat, Universal - Seat assembly, Yellow leatherette upholstery, Dimensions: 18-3/4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward/rear adjustment (Slide track 9 inches W x 11-1/4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110YL) $106.23

Seat, Universal INDUSTRIAL with SLIDES - Seat, universal, non-suspension style seat assembly with slide track for forward/rear adjustment. Slotted base for adjusting slide tracks side to side 4" to 10-1/4". Black leatherette upholstery, vacuum formed and watertight for use in all weather conditions. (Part No: TS1036IND) $70.15

Tie-On Seat Cover - Yellow & Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Part No: R2602) $36.00

Tie-On Seat Cover - Yellow & White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Part No: R1014) $36.00

Tie-On Seat Cover - Green & White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Part No: R1016) $36.00

Universal Seat - Black leatherette upholstery. Narrow seat for compact tractors. Internal suspension, weight adjustable. 5 position adjustable base. Special slotted base for mounting. Seat is 15" wide, 17" long, 19" high to the back of the seat. (Part No: TS1015) $172.58

Universal Seat - **YELLOW** Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Part No: TS1040ATSP) $97.65

Sheet Metal / Body Parts
2 Hour DVD - The How To's of Sheetmetal Repair - This DVD is intended to show how to restore sheetmetal on your tractor. A John Deere tractor is used in the demonstrations but the information is useful for all tractors. You can use this DVD as a tool to evaluate what work, cost, and time it is going to take to restore the tractor you own or are looking to purchase. 118 minutes. (Part No: RCR06-DVD) $24.00

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Part No: R0140) $30.09

DZUS Fasteners Kit - Universal Set of 5 fasteners. 1/4 Turn Fasteners. For 13/32 inch holes, Head Diameter is 11/16, springs are 1 7/8 inch in length. Verify size before ordering. (Part No: DZUS2) $16.00

Fender Hand Grip - Used on many ag tractors, combines, implements and industrial tractor applications. (Part No: R20759) $9.86

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, and 1/2. (Part No: RPD112K) $138.96

SAFETY STEP KIT - Traction Where you need it. Great for use on tractor and combine steps, trailers, grain bin ladders and more. Kit includes 1 pint safety base and safety grit. (Part No: SSK14011) $51.96

Tool Box - Universal Tool Box 15 1/2" X 4 3/4" X 4 1/4". Painted Red. (Part No: R2685) $29.40

Tool Box, Fender Mount - This is an aftermarket toolbox designed to mount easily on the fender of most agricultural and industrial tractors. This is an aftermarket item, unlike any original toolboxes, and is meant for working tractors in need of a good toolbox. 18 inches long, 3-5/8" wide and 4-1/2" deep. (Part No: TB100FM) $43.86

Toolbox - Universal style of 11 inches long, 4 inches wide and 4.5 inches tall. Must drill mounting holes to match your tractor. (Part No: ABC308) $37.50

Steering
Steering Wheel Cap - 2 legged deer, correct cap for all covered steering wheels on JD models from 1968-2000. (Part No: AL155227) $36.75

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Part No: R3275) $10.00

Steering Wheel Spinner, Black - Comes with mounting hardware. (Part No: R3276) $11.70

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Part No: R3279) $11.70

Steering Wheel Spinner, Green - Comes with mounting hardware. (Part No: R3278) $11.70

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Part No: R6323) $11.70

Steering Wheel Spinner, Red - Comes with mounting hardware. (Part No: R3277) $11.70

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Part No: R3280) $11.70

Tools
*Combination Wrench Set - 22 pieces SAE/Metric. Polished chrome vanadium steel. Metric: 9, thru 19 mm. SAE: 1/4 thru 7/8. Comes with a durable plastic rack for handy storage. LIFE TIME UNLIMITED WARRANTY. (Part No: W1069) $29.99

Adjustable Cylinder Hone Replacement Stones, Coarse - Set of three 4" coarse textured stones with cotter pins for 900542 cylinder hone. (Part No: 900563) $17.48

Adjustable Cylinder Hone Replacement Stones, Fine - Set of three 4" fine textured stones with cotter pins for 900542 cylinder hone. (Part No: 900556) $17.48

Adjustable Cylinder Hone Replacement Stones, Medium - Set of three 4" medium textured stones with cotter pins for 900542 cylinder hone. (Part No: 900549) $17.48

Adjustable Engine Cylinder Hone - Resurfaces cylinder walls so new rings will seat and eliminate minor cylinder wall imperfections. 2" to 7" diameter range with adjustable tension settings to control the cutting action. Features flexible shaft that will fit any variable speed drill and replaceable 4" stones. Medium texture stones included. Stone replacement part numbers are (900556)Fine textured stones, (900549) medium textured stones and (900563) coarse stones. (Part No: 900542) $38.37

Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Part No: S.29891) $19.95

Chain Binder - 1/4" chain binder, 2600 pound load limit. (Part No: LL104) $36.74

Chain Binder - 3/8" chain binder, 5400 pound load limt. Use with either 5/16" or 3/8" chain. (Part No: LL105) $41.70

Chain Binder - 1/2" chain binder, 9200 pound load limit. Use with either 3/8" or 1/2" chain. (Part No: LL106) $78.11

Chain Binder - 1/2" chain binder, 9200 pound load limit. Use with either 3/8" or 1/2" chain. (Part No: LL106) $78.11

Combination Wrench Set - 11 pieces. Sae sizes 1/4 to 7/8. Chrome vanadium steel construction. Handy storage rack. LIFETIME UNCONDITIONAL WARRANTY. (Part No: W1061) $21.00

Compression Tester - Checks cylinder compression up to 300 PSI. Fits 14 and 18mm spark plug threads. Equipped with air-hold valve and gauge reset button. 11 inch flexible rubber hose. Complete with instructions. (Part No: W80579) $32.48

Cotter Pin Assortment - 150 Pieces. Contains sizes of 1/8x2, 5/32x2 1/2, 3/16 x 3, 1/4 x 2, 1/4 x 3, 5/16 x 2 1/2. All in a convenient re-sealable plastic case. (Part No: W5206) $12.48

Cotter Pin Assortment, Small - 560 piece assortment of 1/16" x 1", 3/32" x 1", 3/32" x 1-1/2", 1/8" x 1-1/4", 1/8" x 2", 5/32" x 2-1/2" all in convenient re-sealable plastic case. (Part No: W5205) $9.40

Diesel Compression Test Kit - Complete kit with case. 0 to 1000 PSI Gauge (0-700kPA). Includes 9 adapters for popular Domestic, Asian and European vehicles. Will fit the following thread sizes: 24 x 2.00, 12 x 1.25, 10 x 1.25, 10 x 1. Tests compresssion through both flow plug and injector holes. Gauge accuracy +/- 2 percent. (Part No: W89731) $59.95

Digital Calipers, Stainless - High quality hardened stainless steel digital caliper. calculates measurements up to 6" with SAE and METRIC conversions. Includes convenient carrying case and spare battery. (Part No: CAL6) $36.11

GREASE GUN - GREASE GUN-Pistol handle grease gun uses standard 11" grease cartridge. Develops 8000 lbs pressure. Pistol design makes it convenient to use. (Part No: GG3121) $28.88

GREASE GUN - Spring fed 11" barrel grease gun. Uses standard 11" grease cartridge. Lever handle develops 10, 000 lbs of pressure. (Part No: GG1080) $26.74

GREASE GUN - HEAVY DUTY Grease gun, ultimate gun designed specifically for heavy-duty use and is built to take extreme punishment. (Part No: GG11142) $35.16

GREASE GUN CLAMP - Clamp holds all 2-1/4" diameter barrel hand guns. Bolts or screws anywhere thru hole in bracket base. (Part No: GC102) $12.44

GREASE GUN POWERLUBER 14.4V BATTERY - Battery, Replacement 14.4 Volt NI-CAD rechargeable battery for use with GGPL1442B & GGPL1444B PowerLuber grease gun. (Part No: GGPL1401) $109.95

GREASE GUN POWERLUBER 14.4V with CASE 1 BAT - Grease gun 14.4 Volt PowerLuber, Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, 14.4 volt NI-CAD rechargeable battery, 30" flex hose with spring guard & custom carrying case to hold two rechargeable batteries. (Part No: GGPL1442B) $270.05

GREASE GUN POWERLUBER 14.4V with CASE 2 BAT - Grease gun 14.4 Volt PowerLuber, Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, (2) 14.4 volt NI-CAD rechargeable batteries, 30" flex hose with spring guard & custom carrying case to hold two rechargeable batteries. (Part No: GGPL1444B) $376.87

GREASE HOSE 12 INCH - 12 flexible grease gun hose.Sold in quantities of 2, PRICE IS FOR EACH. (Part No: G115) $10.86

GREASE HOSE 18 INCH - 18" flexible grease gun hose.Sold in quantities of 2, PRICE IS FOR EACH. (Part No: G118) $9.90

Hair Pin Assortment - 150 pieces. Includes 6 different sizes from 1 3/16 Length to 2 15/16. All in a convenient re-sealable plastic case. (Part No: W5210) $8.32

Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Part No: S.58474) $249.90

Hobby Tool Kit - With Carrying Case. Complete Knife kit with two handle styles. Also comes with 3 inch caliper, tweezers, precision screwdriver and 28 blades. (Part No: W1709) $23.74

Hose Clamps Assortment - 26 pieces. Includes sizes of: 5/8, 7/8, 1, 1 1/16, 1 1/4, 1 1/2 inch. All in a convenient re-sealable plastic case. (Part No: W5348) $8.06

MULTI TESTER - Compact size meter for testing volts (up to 500 Volts), OHMS and AMPS. Includes color coded test probes and instruction booklet. Uses AA batteries, not included. (Part No: ETA66420) $24.76

Main Seal Installer/Remover - Removes and installs upper rear main seals on many engines without removing engine or crankshaft. Contains corkscrew removal tool, T-handle and wire with clip for pulling new seals into place, 2 extra clips. (Part No: W84019) $7.10

O-Ring Assortment - 407 pieces. Includes 32 sizes from 1/4 O.D to 2 1/4 O.D. All in a convenient re-sealable plastic case. (Part No: W5202) $16.36

Piston Ring Compressor - Use to install pistons. Positive compression and adjustable friction brake. Includes instructions. Band diameter from 3.5 to 7 inches (88 to 177mm). (Part No: W80573) $18.12

Piston Ring Groove Cleaner - Cleans carbon and deposits from ring grooves. Includes two 5 cutter wheels for a total of 10 groove cleaning sizes: SAE: 1/16, 5/64, 3/32, 3/16 and 1/4. Metric: 1.5, 1.75 and 2 mm. (Part No: W80576) $18.26

Rotary Tool Kit - 80 Pieces. Hand held rotary tool. Turns at 1600 rpm. Contains cut off wheel mandrel, polishing cloth wheels, mandrel for polishing cloths, carbide burr, collets, sanding drums and sleeves, buffing wheels, dressing stone and drill bits. Great for cutting, grinding, polishing, sharpening and drilling. (Part No: W50083) $19.00

Rubber Grommet Assortment - 125 pieces in 18 various sizes from 1/8 x 9/32 to 1 inch. All in a convenient re-sealable plastic case. (Part No: W5214) $9.38

Screwdriver Set - 30 pieces. Contains 7 screwdrivers 1/4 to 6 inch, a magnetic bit driver, 6 precision screwdrivers, 14 power bits. All contained in a Plastic Rack (Part No: W1718) $23.08

Spring Assortment - 200 pieces. Includes compression type sizes from 9/32 x 1/2 to 7/32 x 1 1/2, extension type from 13/64 x 13/16 to 11/32 x 1 7/16. (Part No: W5200) $7.98

Step Drill Bit Set - 3 Pieces. Titanium Nitride Coated high speed steel. 1/4 inch shank. Drills holes up to 1 inch. For use with metal, wood or plastic. Starts on contact, no center punch required. Automatically deburrs holes as you drill. (Part No: W9003) $17.20

T-Handle Hex Key Set - 10 Pieces (SAE). High quality carbon steel shafts. Black oxide finish resists corrosion. PVC T-handle grips for added torque and comfort. Sizes: 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16 and 3/8 inch. Comes with hand storage rack (mountable). (Part No: W80274) $19.94

Torque Wrench - Micrometer 1/2 inch drive adjustable torque wrench. Chrome plated alloy steel. Reversible ratchet head. SAE and Metric Scale. 10 to 150 lb torque range. 1 lb graduations. (Part No: M200DB) $34.40

Valve Spring Tool - Compresses springs without removing head. Adjustable cam handle keeps tool correctly adjusted for entire job. Remove lever and turn with socket in confined areas. (Part No: W80567) $31.24

WIRE STRIPPER 4-WAY - 4-way wire stripper/crimper tool, cuts wire 10 gauge and lighter. Strips wire 10-22 gauge, crimps solderless terminals. (Part No: ETA66223) $9.88

Winch Remote, Wireless - Used with winch sets 3013-0002 and 3013-0001. (Part No: 3013-0003) $37.50

Winch Set, 2500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0002) $129.95

Winch Set, 2500 Lb - Universal 12 volt with Hand held remote. (Part No: 3013-0004) $119.95

Winch Set, 3500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0001) $149.95

Winch Set, 3500 Lb - Universal 12 volt with Hand held remote. (Part No: 3013-0005) $129.95

Wire Terminal Assortment - 160 piece set. Contains 19 popular sizes and types of wire terminals. All in a convenient re-sealable plastic case. (Part No: W5213) $15.48

Woodruff Key Assortment - 80 pieces. Includes 10 each of: 3x5x13 mm, 3x6.5x16 mm, 4x5x13 mm, 4x6.5x16 mm, 4x7.5x19 mm, 5x7.5x19 mm, 5x9x22 mm, 6x9x22 mm. All in a convenient re-sealable plastic case. (Part No: W5341) $11.26

Tractor Manual Search - Yesterday's Tractor Co.

Wheels
Front Tractor Tires - We are now offering Front Tractor Tires! Click on the picture to view different tread designs. Tires that have a corresponding letter are available. Tread designs vary depending on size and availability. Allow 7 to 10 business days for delivery. Call for shipping cost, pricing and tire availability 1-800-853-2651. Please have your tire size available. Do not put this part in basket. NOTE

Rear Rim Carriage Head Bolt and Nut - 2.5 length, 5/8 diameter FF Carriage Head Bolt with 1/2 inchnuts. PRICED EACH. **Minimum order is quantity of 6. (Part No: HB250) $3.25

Rear Tractor Tires - We are now offering Rear Tractor Tires! Click on the picture to view different tread designs. Tires that have a corresponding letter are available. Tread designs vary depending on size and availability. Allow 7 to 10 business days for delivery. Call for shipping cost, pricing and tire availability 1-800-853-2651. Please have your tire size available. Do not put this part in basket. NOTE

TIRE GAUGE - Gauge has special oiling & pump-out feature to clean out anti-freeze. Calibrated 4-50 pounds. (Part No: T9350) $15.48

TIRE GAUGE DIAL - Precision bourdon tube (non-plunger), dial style tire gauge: 60 pound. Reading in 1 pound calibrations. Individual "see-thru" vinyl permanent container pouch. Not for use with liquid-filled tires. (Part No: T600XG) $17.16

Tire Gauge, Heavy Duty - Accugage measures up to 60 lbs. Comes with braded flexible hose, bleed valve, unbreakable crystal and rubber boot. Breass geared movement. Bourdon tube design (not plunger type). (Part No: B1SB6599) $42.82

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R) $39.95

Tire Paint, Black - Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is a concentrate which you dilute one-to-one with water. A little goes a long way! (Part No: E844Q) $21.00

Tire Tube 24 Inch - For 7.5, 8.3, 9.5 x 24 inch tires. (Part No: WHS060) $37.60

Tire Tube 24 Inch - For 11.2, 12.4 x 24 inch tires. (Part No: WHS059) $51.30

Tire Tube 28 Inch - For 11.2, 12.4 x 28 Inch Tires. (Part No: WHS058) $56.55

Tire Tube 28 Inch - For 13.6, 14.9 x 28 Inch Tires. (Part No: WHS061) $79.45

Tire Tube 32 Inch - For 9.5 x 32 Inch Tires. (Part No: WHS062) $56.95

Tire Tube 34 and 36 Inch - For 11.2 or 12.4 x 34 Inch Tires and for 11.2 or 12.4 x 36 Inch Tires. (Part No: WHS063) $59.90

Tire Tube 38 Inch - For 11.2, 12.4 x 38 Inch Tires. (Part No: WHS064) $65.25

Tire Valve Fluid Adapter - For ballast. (Part No: S.61167) $27.90

Tire and Tube - 400x12 3 Rib Tire with tube. (Part No: 400x12-3) $74.22

Show CategoriesShow all 2630 Parts
Manuals
If you will be servicing or maintaining your tractor, we highly recommend that you have a manual to refer to. We searched the tractor manual database and found the following items. They may or may not apply to your tractor, please read the descriptions carefully. Our search engine isn't perfect... yet!
John Deere Model 2630 Manuals
2630 I&T Aftermarket Shop Repair Manual 97 Pages (Part No: JD-202) $29.95

Miscellaneous Related Items
Misc Repair DVD
John Deere POWER-TROL Repair - In-depth information on reparing the John Deere Power Trol. (Part No: JDV-01850) $24.00

JD Repair DVD
How to Rebuild Duplex Carburetors - Does your John Deere tractor pull but will not idle? Starts hard and runs only by working the choke? Runs for short periods and then quits? This professionally produced DVD will help you trouble shoot these problems and go through a complete overhaul of the Duplex carburetor. It is designed for the home mechanic with a basic tool box. 111 minutes. (Part No: RCR01-DVD) $24.00

How to Rebuild DLTX Series Carburetors - This DVD shows simulated running problems. You will be able to hear what problems sound like so you can identify them. It will also show how to fix plugged idle passages, what to look for when your carburetor won't idle right, how to clean, and why you need to heat brass parts before removing them. 111 minutes. (Part No: RCR03-DVD) $24.00

How to Rebuild Wico Series Magnetos - A step by step DVD on the operation, repairing, and timing of the magnetos. This DVD will show basic principles of electricity and troubleshooting problems. And then it's back to the tractor for reinstallation and timing. 103 minutes. (Part No: RCR04-DVD) $24.00

How to Rebuild Two-Cylinder Governors - This DVD shows how to rebuild governors used on John Deere tractors. You will see how to rebuild worn parts that are too expensive to replace. We will go to the machine shop and follow the machinist through the disassembly and reassembly of the gears. 121 minutes. (Part No: RCR05-DVD) $24.00

Hat
Basic black cap - With embroidered John Deere logo. (Part No: JDBL) $19.95

Basic green cap - With embroidered John Deere logo. (Part No: JDGR) $19.95

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

[Show Categories]   [Show all John Deere Models]   [Printer Friendly]  





PayPal


Customer Service
Monday - Friday
10:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure

  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2014 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.