(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford Tractor Steering


Click here to see parts by model


Ford Power Steering Pump Pulley
- This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1\8 inch keyway, 0.9715 inch total width for 1\2 inch belt. (Part No: ABC1417)
$37.45

Ford Steering Wheel
- 18 inch diameter, 11\16 inch x 36 spline hub. New style with Covered Spokes. For 8N 1948-1952, NAA, 600, 620, 630, 640, 650, 660, 700, 800, 900, 2000, 4000 (all 4 cylinder engines). NOT LIKE ORIGINAL - Modern version features Covered Spokes. Replaces 8N3600 (Part No: D6NN3600B)
$27.73

Ford Steering Sector, Left Hand
- Left Hand Steering Sector Shaft (Single Gear) 5 tooth. For 8N serial number 216989 and up, NAA, 600, 700, 800, 900, 2000, 4000. If your left hand does not have 5 teeth, you can use this part but must replace both right and left. Shaft cover must be late style. Replaces OEM numbers 251293 and C3NN3526A. (Part No: 251293)
$158.70

Ford Power Steering Box
- For 5100, 7100, both 9\1970 to 1975. For 5600, 6600, 7600 less cab. All 1975 to 1981. Complete Power Steering Assembly. Not to be used with front end loaders. Pressure port is 1\2 inch x 16 pitch, Return port is 3\4 inch x 16 pitch. This may be different than some originals, and new lines may be needed (not available through YT). Replaces 83934944, 83954900, 87486289, D5NN3N503C, D5NN3N503F, D5NN3N503H, D8NN3N503JA, E1NN3N503BA, E1NN3N503BB, E1NN3N503BC. (Part No: E1NN3N503BC)
$1276.50

Ford Steering Shaft Repair Kit
- Repair kit for Steering Shaft. Services shafts where upper oil seal has worn a groove into shaft causing oil to leak from upper housing. For 2-WD Models: 600, 640, 611, 621, 631, 641, 651, 671, 800, 840, 801, 811, 821, 831, 841, 851, 861, 871. 2100, 2110, 2120, 2150, 3055, 3100, 3120, 3150, 3400, 4110, 4140 (1965-1975); 2600, 3600, 3900, 4100, 4600SU, 335, 532 (with or without cab 1975-3\1976; without cab 4\1976-1981); 2310, 2610, 2910, 3610, 3910, 3910SU, 4110SU, 4610SU, 230A, 234, 334, 530A (without cab 1981-9\1984). (Part No: SRK632AA)
$46.22

Ford Grill \ Steering Wheel Emblem
- This new Emblem is used on 1962-1964 Ford 6000 Commander as a front grill or steering wheel Emblem. Replaces: C0NN16600A, C5NN3A515A. Includes mounting hardware. (Part No: C0NN16600A)
$59.95

Ford Steering Box Side Cover Gasket
- This is an Aluminum Gasket for Steering Box Side Cover used on Ford 8N prior to serial number 216989. (Part No: 8N3581A)
$3.95

Ford Steering Gear Side Cover O-Ring
- This Steering Gear Side Cover O-Ring is used on 8N after serial number 216988 and other Ford Tractors 1953-1964. Replaces 8N3581B. (Part No: 8N3581B)
$1.95

Ford Steering Sector Retainer Seal
- This Steering Sector Retainer Seal is used on Ford Tractors 1949 to 1964. It replaces 8N3585, 8N3591, 8N3591A, 8N3591B, D5UZ3591A, D5UZ3591B (Part No: 8N3591B)
$6.50

Ford Power Steering Conversion Kit
- For Ford 4 cylinder gas and diesel: 600, 620, 630, 640, 650, 660, 601, 611, 621, 641, 651, 661, 671, 681, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 2000, 4000. Cannot be used with Front End Loaders. Not for RowCrop models. Kit includes all parts necessary for conversion (items shown in picture) including power steering pump, belt & pulley, hydraulic control arm etc. Made in U.S.A. (Part No: S.60305)
$1505.81

Ford Power Steering Kit
- For Ford 5000. Kit Includes Oil reservoir, pump, hyraulic steering assembly, hoses and simple instructions. Not to be used with front end loaders. (Part No: S.60749)
$624.95

Ford Power Steering Kit
- For Ford 2000, 2600, 2610, 3000, 3600, all with 3 Cylinder engines. Will not work with Front Loaders. (Part No: S.60747)
$579.46

Ford Steering Wheel Washer
- This Steering Wheel Washer is used on 3 spoke wheels, 1939 - 1947. It has a 1.5 Inch Outside Diameter. It replaces original part number 2N3673 (Part No: 2N3673)
$3.95

Ford Steering Wheel Washer
- This Steering Wheel Washer is used with 4 spoke steering wheel. It has a 1.80 inch outside diameter. It replaces original part number 9N3673 (Part No: 9N3673)
$3.95

Ford Steering Column Felt Dust Seal Retainer
- This Steering Column Felt Dust Seal Retainer is used on Ford 9N and 2N 1939-1947. It replaces original part number 9N3661. (Part No: 9N3661)
$3.50

Ford Steering Shaft and Pinion
- Fits 9N and 2N tractors 1939 to 1947. Contains shaft and pinion only. For complete set use Part number SGS3. (Part No: 9N3525)
$86.94

Ford Steering Wheel
- For 9N and 2N. 17 5\8 inch diameter, 11\16 inch keyed hub. Replaces OEM part number 2N3600. Looks just like original with bare spokes! For 9N and 2N. (Part No: R2090)
$26.92

Ford Power Steering Pump
- For (2000, 3000, 4000, 4500, 5000 all 1965-1974) (3055, 4140 all 1970-1974)(3150 1970- 11\1975) (3500 1965-1971)(7000 10\1971-1974). Power Steering Pump. (Part No: D8NN3K514KC)
$946.79

Ford Steering Shaft & Nut Assembly
- Right hand spiral with single bolt sector adjustor. For tractor models 8N (1950->1952). (Part No: 8N3575B)
$129.65

Ford Steering Shaft & Nut Assembly
- Overall length is 25 7\8 inches. For tractor models Major, Power Major, Super Major. (Part No: 81717457)
$190.19

Ford Steering Shaft & Nut Assembly
- For tractor models NAA & Jubilee with Manual Steering. 22 1\2 long. (Part No: NAA3575C)
$116.60

Ford Power Steering Pump
- For 2000, 3000, 4110 (1965-9\1968), 3400, 4410 (1965-4\1970). Power Steering Pump with External Reservoir. 650 PSI, 3.5 GPM. 61316S (Part No: C7NN3A674C)
$776.31

Ford Power Steering Pump
- For tractor models 5000 1965-9\1968, 4200, 5200, 7200 Rowcrop 1966-1973. Power Steering Pump with External Reservoir. 1100 PSI, 3.5 GPM. 61186S. (Part No: C7NN3A674G)
$746.69

Ford Power Steering Pump
- For 3500, 3550 5\1970 and up, 5100, 7100 7\1970 and up, 4100 4\1970 and up, 4600, 5600, 6600, 7600 5\1981 and up, 5610, 6610, 7610 4\1985 and up. Power Steering Pump with reservoir. Pressure relief valves set at 1100 PSI, 2.74 GPM. This pump can replace: 83949432, E6NN3K514DA. Set at 650 PSI to fit: 2000, 3000 10\1968 and up, 2600, 3600, 4100, 2610, 3610, 4110 less cab, 83959550 - E6NN3K514CA. Pressure setting at 850 PSI to fit: 4000 (10\1968-3\1970), 2600, 3600, 4110 with cab. Replaces OEM D8NN3K514GA, D8NN3K514GB, D8NN3K514GC, E6NN3K514EA, 83917191, 83923736, 83924995, 83959533, 87759440, A709527 (Part No: E6NN3K514EA)
$165.60

Ford Steering Gear Assembly
- For tractor models Ind. 4400, 4500 with Power Steering. Note-When making a right hand turn steering arm moves clockwise. (Part No: D7NN3503E)
$642.42

Ford Steering Gear Assembly
- For tractor models 5000 (1965-8\1970) with Power Steering. NOTE Later 5000s have a valve on the steering column. This is not a replacement for that style steering gear assembly. (Part No: C5NN3503E)
$642.42

Ford Steering Shaft
- Steering Shaft (25 7\8 LONG). Fits Fordson (Major 8\1958 to 12\1964), (Power Major & Super Major 8\1958-12\1965. (Part No: E1ADDN3524)
$190.19

Ford Power Steering Block
- Gear Adapter Block For 2000, 3000, 4000SU, 2600, 3600, 3900, 4600SU, (2310, 2610, 2910, 3610, 3910, 4610SU 1981-9\1984). (S.61625) Replaces D9NN3N748AA, 86570855 (Part No: D9NN3N748AA)
$136.88

Ford Steering Shaft & Nut Assembly
- For 8N 1948-1949 with 4 bolt Sector Adjustor. LEFT HAND SPIRAL. Serial number less than 216989 (1948-1949). (Part No: 8N3575A)
$189.06

Ford Manual Steering Shaft and Nut Assembly
- Overall length 26 1\8 inches. For tractor models 2000, 3000, 2600, 3600. Manual Steering Shaft and Nut Assembly. (S.65156) (Part No: D2NN3A710B)
$104.33

Ford Power Steering Shaft and Nut Assembly Before 1965
- For tractor models 601, 801, 2000, (4000 up to 1965). Power Steering Shaft and Nut Assembly. 23 7\8 inch overall length. (Part No: 310859)
$241.50

Ford Steering Wheel
- Keyed, steel spokes. Wheel measures 17 1\2 inches in diameter and 3\4 inch hub. Replaces E0NN3600AA (Part No: 180576M1-OE)
$26.14

Ford Steering Shaft & Nut Assembly, Manual
- Fits 600, 800, 601, 801, 2000, 4000 (1955- 1963). Does not come with Lower Bearing. (Part No: NCA3575A)
$118.54

Ford Steering Shaft Bearing and Cup Assembly - QTY 2
- 1-3\4 inch outside diameter. For tractor models 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 4000. 1953-1964. Price is for 2 Sets (2 Bearings and 2 races. 2 sets are required per steering shaft\top and bottom. Replaces 8N3571 and 8N3552. (Part No: 8N3505)
$38.52

Ford Steering Gear Set
- Fits 9N and 2N tractors 1939-47. Set contains one each of 9N3525 Shaft and pinion assembly, 9N3526 steering sector, right hand, and 9N3527 steering sector, left hand. (Part No: SGS3)
$416.10

Ford Steering Shaft Bearing Cup
- For tractor models up to 1964 including: 8N late, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Part No: 8N3552)
$6.95

Ford Steering Shaft Bearing
- For tractor models up to 1964 including: 8N, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Part No: 8N3571-OE)
$10.35

Ford Steering Shaft Bearing Cup
- For tractor models 9N, 2N. Price is for 1. Two are used on the steering shaft, one at the top and one at the bottom. Replaces B3552. (Part No: 6-TIM)
$15.43

Ford Steering Shaft Bearing
- For tractor models 9N, 2N. Replaces 683571A. Price is for 1. Two are used on the steering shaft, one at the top and one at the bottom. (Part No: 5BC-TIM)
$13.10

Ford Steering Sector Gear Bushing
- For tractor models 9N, 2N. Priced per pair. Two halves needed per side. 2 pairs needed per tractor. Order 2 for complete tractor. (Part No: 9N3517)
$9.50

Ford Steering Sector Gear (RH)
- For tractor models 9N, 2N. (Part No: 9N3526)
$135.93

Ford Steering Sector Gear (LH)
- For tractor models 9N, 2N. (Part No: 9N3527)
$135.93

Ford Steering Shaft Bearing And Cup Assembly
- Replacement for bearing type. For tractor models 1948-1964, 8N, NAA, 600, 800. For steering shaft on tractors with manual steering. This is a one piece neoprene bearing that replaces 1 of 8N3552 and 1 of 8N3571. Price is for One (1) assembly - Two (2) assemblies required per steering shaft\top and bottom. (Part No: 8N3571-52)
$19.31

Ford Steering Column Collar
- For 9N, 2N. Collar, retains dust seal in top of column. Exactly Like Original. WITHOUT GREASE FITTING HOLE. (Part No: 9N3669A)
$6.50

Ford Steering Column Collar with Grease Fitting Hole
- For 9N, 2N. Collar with grease fitting hole, retains dust seal in top of column. Exactly Like Original. WITH GREASE FITTING HOLE. (Part No: 9N3669B)
$6.50

Ford Power Steering
- PUMP with Reservoir. Use with o-ring fittings. For 2830, 2930, 3930, 4130, 4630, 4830, 5030. Replaces OEM number F1NN3K514BA99. (Part No: R4104)
$509.22

Ford Power Steering
- Pump with reservoir use with flair fittings for 4100, 4600, 4610, 4630, 5100, 5600, 5610, 5900, 6600, 6610, 7100, 7600, 7610. Replaces E6NN3K514PA99. (Part No: R4106)
$425.25

Ford Power Steering
- Pump with Reservoir. For tractor models 6700, 6710, 7700, 7710, 7810, 7910, 8210. (Part No: R4107)
$739.94

Ford Power Steering
- PUMP with Reservoir with barbed return fitting For 8000, 8600, 8700, 9000, 9600, 9700, TW-5, TW-10, TW-15, TW-20, TW-25. Also replaces D7NN3K514G. (Part No: E0NN3K514AB)
$641.08

No
Picture
Ford Power Steering
- PUMP with Reservoir with Pipe Return Fitting For 8000, 8700, 9700, TW-10, TW-20 (Part No: R4109)
$830.85

No
Picture
Ford Power Steering
- PUMP without Reservoir For 8000, 8600, 8700, 9000, 9600, 9700 (1968-2\1973) (Part No: R4110)
$832.43

Ford Power Steering
- PUMP with Reservoir For 9700 (From 8\1976), TW-30, TW-35. OEM# D8NN3K514JD (Part No: R4111)
$581.18

Ford Steering Wheel
- 17-5\8 inch diameter, 11\16 inch-13\16 inch keyed, 3 covered steel spokes. For tractor models: 9N, 2N 1939 to 1947. Replaces 2N3600. (Part No: 180576M1)
$18.30

Ford Steering Wheel
- Steering Wheel OEM Style, 17-1\2 inch diameter, 11\16 inch 36-SPLINE Hub. Metal Spokes. For: 8N, 2000, 4000, 600, 700, 800, 900, NAA. (R2091) (Part No: 8N3600-OE)
$26.24

Ford Power Steering Ball Joint
- Cylinder end with 7\16 inch internal threads. For OEM and Tisco power steering cylinders E2NN3A5AOBA with 1\2 inch diameter rod and D4NN3A54OA with 5\8 inch diameter rod. For models: 2000, 230A, 231, 234, 2600, 3000, 334, 3600, 4000, 4600, 530A, 531, 601, 801. (Part No: C5NN3A302B)
$18.53

Ford Power Steering Cylinder
- Power Steering Cylinder with 5\8 inch diameter rod, 1\2 inch diameter threaded outer end. For 335, 3400, 4110, 532, 2000 Industrial, 4000 Industrial. Uses CAPN3300A Rod end. Replaces, C5NN3A739G, C5NN3C578B. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Part No: C5NN3A739G)
$227.98

No
Picture
Ford Steering Shaft With Nut
- Steering Shaft and Nut Assembly. Left hand spiral. For 4400, 4500, 515, 535 (Part No: D2NN3A710E)
$209.10

Ford Steering Wheel
- Steering Wheel, 18 inch outside diameter, 36 Spline, .785 inch shaft diameter, 3 Rubberized Plastic Covered Spokes. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 6600, 6610, 7000, 7600. Can replace OEM number 82016841. (Part No: D6NN3600B)
$27.73

Ford Power Steering Ball Joint, Female
- Power Steering Cylinder Ball Joint Female End with 11\16 inch Internal Threads. End screws onto rod. For TISCO Universal Power Steering Cylinders D8NN3A540AB-HD and D8NN3D547AB-HD. (Part No: D8NN3A540BJF)
$18.45

Ford Power Steering Cylinder
- Power Steering Cylinder is 14 1\4 inches long with 1\2 inch diameter rod, 7\16 inch diameter threaded outer end. For 2000, 230A, 231, 234, 2600, 3000, 334, 3600, 4000, 530A, 531, 601, 801. Comes with cylinder end ball joint E2NN3A540BJ. Rod end ball joint sold separately as part number C5NN3A302B. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. Replaces E2NN3A540A, E2NN3A540BA, E2NN3D547AA, 83955791. (Part No: E2NN3A540BA)
$227.98

Ford Power Steering Ball Joint Male
- This Power Steering Ball Joint end measures 2.125 inches from the end of the threads to the center of the knuckle, and 5\8 diameter threads with 18 threads per inch. Cylinder end. For tractor models 2000, 230A, 231, 234, 2600, 3000, 334, 3400, 3600, 4000, 4410, 4600, 530A, 531, 532, 601, 801. (Part No: E2NN3A540BJ)
$23.15

Ford Power Steering Pump
- Power Steering Pump and Reservoir Assembly. For 5610S, 5610, 5900, 6610S, 6610, 7610S, 7610, 7810S. (Part No: E6NN3K514AB)
$233.22

Ford Power Steering Hose
- Single wire braid hose with fittings; 35 inches long. For 600, 800, NAA. (Part No: FPH34)
$36.81

Ford Power Steering Hose Assembly
- Flexible Power Steering Hose designed to replace rigid Ford tube assemblies. 54 inches long, 3\8 inch inside diameter. SAE 100 R1A single wire braid hose with 5\8 inch-18 thread, staight SAE flare female swivel on one end, 5\8 inch-18 thread SAE straight inverted flare on other. For tractor models 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600, 7000, 7600. Can replace tube assemblies C5NN3A562C, C7NN3A562C, C5NN3A541A, C7NN3A541A, C7NN3A541B, D0NN3A562A. (Part No: FPH54)
$49.05

Ford Steering Wheel Spinner Assortment
- Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Part No: WSV125A)
$76.09

Ford Steering Wheel Nut, Chrome
- Nut, Steering Wheel ACORN Style. 5\8-18, CHROME PLATED. For tractors: 9N, 2N {1939-1947}. Head uses a 1 1\8 inch wrench. (Part No: 351103CC)
$5.03

Ford Steering Wheel Nut, Chrome
- Nut, Steering Wheel ACORN style. 11\16 inch-20. CHROME PLATED. For tractor models 8N, NAA {1948-1954}, 600, 700, 800, 900, NAA. (Part No: 351114CC)
$5.94

Ford Steering Shaft Bushing
- Bushing assembly, upper. For tractor models 2000, 3000, 4000 1965 and up with power steering. (Part No: C5NN3517A)
$5.91

Ford Steering Arm
- For 4100, 2100, 2600, 3100, 3600, 600, 700, 800, 8N, 900, Dexta, Super Dexta NAA, Jubilee. Steering Arm also replaces 310799, 8N3130B, 957E3130. (Part No: 310799)
$38.54

Ford Steering Arm Right Hand
- For 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7700. Right Hand Steering Arm used with D2NN3105C, C5NN3105M, C7NN3105D. (Part No: C5NN3130J)
$43.44

Ford Steering Sector, Right Hand
- Sector (Double Gear) 7 tooth. Replaces OEM numbers 251294, C3NN3527A. If your left hand does not have 5 teeth, you can use this part but must replace both right and left. (Part No: 251294)
$156.44

Ford Steering Shaft Grommet
- Steering Column to Instrumental Panel Grommet. For tractors: 8N {1948-1952}. (Part No: 8N3578)
$4.95

Ford Steering Wheel Nut
- Steering Wheel Retaining Nut. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 6600, 7000, 7600. 11\16 inch - 20 NF thread. Replaces 356130S8, 83906211, C5NN3N602A, D5NN3N602A. (Part No: D5NN3N602A)
$4.13

Ford Steering Rocker Shaft Oil Seal
- Oil Seal, Inner for Rocker Shaft. For tractor models 2600, 2610, 3600, 3610, 4000, 4100, 4110, 4600, 4610, Major, Super Major. (Part No: DDN3539)
$14.30

Ford Steering Wheel Nut - Chrome
- Acorn style chrome nut, 11\16 coarse thread. Fits 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 (Part No: S.61963)
$5.76

Ford Steering Wheel Nut, Unfinished
- Steering Wheel Nut - Unfinished - Acorn Style Nut, 11\16 inch. Fits 8N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (Part No: 351114S)
$6.62

Ford Steering Shaft Seat & Seal Kit - Upper
- For 8N, NAA. This kit contains: 8N3570 seal (item 3), 8N3520 spring (item 4), 8N3518 seat (item 5), 8N3517 bearing (upper) (item 6). (Part No: 8N_STRKIT)
$22.91

Ford Steering Arm, RH
- For tractor models 1700, 1710, 1900, 1910, 2110. (Part No: SBA334520250)
$62.39

Ford Filter, Power Steering
- Filter case size is 3 inches diameter and 1 1\2 inch height. Center hole is approximately 7\8 inch diameter. VERIFY size before ordering. Fits 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Major, Power Major, Super Major (without original Ford pump with reservoir on top of pump). Replaces: AE33538A, E101LD9. (Part No: AE33538A)
$2.30

Ford Steering Gear Assembly
- Complete manual steering gear assembly fits late 8N [2 bolt - Sector Shaft Cover] (1949-52). NOTE: Can replace EARLY style Gear Box [4 bolt - Sector Shaft Cover] by swapping drag links side to side. (Part No: 8N3505B)
$586.50

Ford Steering Gear Assembly
- Complete manual steering gear assembly fits: NAA, Jubilee. Comes with drop arms. Replaces DC-349N75 (Part No: 11044452)
$586.50

Ford Steering Gear Assembly
- Complete Manual Steering Gear Assembly with Steering Arms. Fits 600, 601, 800, 801, (2000 and 4000 1955-1964). Does not fit row crops, high crops or offsets. (Part No: S.67079)
$586.50

Ford Steering Gear Assembly
- Manual Steering Box Assembly. Fits 2000, 2600, 2610, 3000, 3600, 3610, 4110LCG. All after 1965. Replaces E4NN3503CA. (Part No: E0NN3503AA)
$412.62

Ford Manual & Power Steering Gear Assembly
- This Steering Gear Assembly fits tractors: With manual steering 1965-8\1970. Will work for power steering on those models with an external power steering cylinder from the steering box and other fittings may need to be purchased which we do not carry. Fits Industrials: 3500, 3550, (420 with power steering) Also replaces OEM number D7NN3503C. (Part No: E0NN3503CA)
$642.42

Ford Steering Gear Assembly, Manual
- Manual Steering Assembly. Fits: 5000, 5600, 5610, 5900, 6600, 6610, 7600. (Part No: D7NN3503A)
$642.42

Ford Steering Shaft
- Shaft is 24 inches long. Fits: Fordson (Major, Power Major, Super Major from 1\1952 to 8\1958). (Part No: E1ADKN3524B)
$133.86

Ford Power Steering Shaft and Ball Nut Assembly After 1964
- Fits 2000, 3000, 4000SU, 2600, 3600, 4100, 4600SU, (2310, 2610, 2910, 3610, 3910, 4110, 4610SU ALL UP TO 9\1984), INDUSTRIALS: 230A, 231, 234, 2110LCG, 334, 335, 3400, 4110LCG, (530A UP TO 9\1984), 531, 532. 26 9\16 inches long. (Part No: D6NN3A710A)
$240.37

Ford Steering Wheel
- 15 inch diameter. For tractor models 2310, 2600, 2610, 2810, 2910, 3230, 3430, 3600, 3610, 3900, 3910, 3930, 4110, 4130, 4600, 4610, 4630, 4830, 5110, 5610, 5900, 6410, 6600, 6610, 6810, 7010, 7610, 8010, Industrials: 230A, 231, 233, 234, 333, 334, 335, 340, 530A, 531, 540, 555B. Replaces OEM number D2NN3600A, D7NN3600A. (Part No: D7NN3600A)
$32.63

Ford Steering Arm, RH
- Right hand steering arm fits Fordson Major, Power Major and Super Major. (Part No: E1ADKN3132)
$48.64

Ford Steering Arm, LH
- Left hand arm fits: Fordson Major, Power Major, Super Major. (Part No: E1ADKN3133B)
$74.95

Ford Steering Shaft Bearing Cone (1)
- Upper or Lower Bearing Cone for Models: 9N, 2N. Two used per tractor. Price is for each. Replaces 9N3573 (Part No: 4CB-TIM)
$21.65

Ford Power Steering Cylinder Repair Kit
- Kits are for repairing ONLY A&I products Power Steering Cylinders. Consists of: 6 o-rings, 2 wiper rings, piston seal. For tractor models 2000, 230A, 231, 234, 3000, 335, 3600, 4600, 531, 601, 801. (Part No: E2NN3A540SK)
$33.83

Ford Gasket, Steering Gear Housing, Rear
- For tractor models 9N, 2N 1939-1947. (Part No: 9N3593B)
$2.95

Ford Gasket, Steering Gear Housing, Front
- For tractor models 9N, 2N 1939-1947. (Part No: 9N3594)
$2.95

Ford Steering Arm Dust Seal
- For tractor models 2000, 3000, 4000, 600, 800, 8N, 900, NAA. Replaces C5NN3125A. (Part No: 8N3528)
$1.34

Ford Steering Box, Drop Arm
- For tractor models 231 1975-1981 with manual steering without cab, 233 1975-1981 with manual steering without cab, 2600 1975-1981 with manual steering without cab, 2810 10\1984-2\1990 with manual or power steering, 2910 10\1984-2\1990 with manual or power steering, 333 1975-1981 with manual steering without cab, 3600 1975-1981 with manual steering without cab, 3900 1975-1981 with manual steering without cab, 4100 1975-1981 with manual steering without cab, 4110 10\1984-2\1990 with manual or power steering, 531 1975-1981 with manual steering without cab. (Part No: E4NN3590AA)
$84.39

Ford Steering Sector Shaft Packing, Pair
- Four Pieces required per tractor. Price is for two pieces. For tractor models 9N, 2N 1939-1947. (Part No: 9N3670)
$13.29

Ford Steering Gear, Pitman Shaft Bushing
- For tractor models 8N, NAA 1949-1954. (Part No: 8N3553)
$7.23

Ford Steering Shaft
- Double pitman, 8 tooth, 36 spline, 9.125 inches long. Replaces C5NN3N576A. For tractor models 2000, 2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 334, 3400, 3500, 3600. (Part No: C7NN3N576A)
$262.35

Ford Steering Column Grommet
- For tractor models 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6000, 6600, 7000, 7600, 2310, 2610, 2810, 2910, 3010, 3110, 3310, 3610, 3910, 4010, 4110, 4410, 4610, 5010, 5110, 5610, 5910, 6410, 6610, 6710, 6810, 7010, 7310, 7410, 7610. 2-7\8 inch outside diameter X 1-1\4 inch inside diameter. (Part No: D2NN3A566B)
$3.10

Ford Steering Shaft Bearing & Cup, Upper
- Manual steering. A=2 inches. For tractor models (2000, 3000 8\1968 and up), 2600, 3600, 3900, 2610, 3610. (Part No: S.65161)
$22.09

Ford Steering Sector Shaft
- For both Manual or Power Steering Applications with SINGLE PITMAN Shaft containing five teeth. For tractor models 2000, 2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 334, 3400, 3500, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4400, 4600SU, 4610SU, 530A, 531, 532, 3350. Replaces C5NN3N575A. (Part No: C7NN3N575A)
$110.62

Ford Steering Wheel
- 17 inch diameter, 1 7\8 Hub Diameter, 6 spline. For tractor models Major, Power Major. (Part No: E1ADKN3600A)
$36.75

Ford Power Steering Cylinder, 2 WD
- For tractor models 5900, (5610, 6610, 6810, 7610, 7810 4\1985 and up), (5610S, 6610S, 7610S, 7810S 1\1994-5\1996). VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Part No: E3NN3A540BA)
$358.66

Ford Steering Wheel
- This Restoration Quality steering wheel measures 18 inch diameter, with 3\4 inch keyed hub, and has 4 covered steel spokes. For model 9N 1939-1940. Replaces 9N3600B. (Part No: S.67507)
$44.92

Ford Bearing, Steering Shaft
- Upper and lower. For tractor models Major, Power Major, Super major. Replaces 353075S. (Part No: E1ADKN3556)
$13.12

Ford Power Steering Kit
- Power steering kit. Kit contains all parts necessary to convert manual steering to power steering. Tractors 1965 and later: 2000 3 cylinder, 3000, 3600, 3610 (*will fit 2000, 3000 tractors that have been changed from generator to alternator). Kit Contents: mounting flange, power steering cylinder, long rod, hydraulic pump, oil tank, pressure tube, inlet hose, emptying tube, 2 tie rod ends, 3 steering arms, middle connection tube, hardware. (Part No: PSKF1)
$667.49

Ford Steering Sector Shaft Seal
- Two of these felt seals are used per tractor. It measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476 (Part No: 8N3586)
$1.10

Ford Steering Column Dust Seal
- For tractor models 9N, 2N. 1939-1957. (Part No: 9N3660)
$2.95

No
Picture
Ford Steering Wheel Cap
- Black Cap for models: (2000, 3000, 4000, 5000, 7000 1965-1975), (2600, 3600, 3900, 4100, 4600, 5600, 6600, 7600, 231, 233, 333, 335, 531, 532, 535 1975-1981), (2310, 2610, 2910, 3610, 3910, 4110, 230A, 234, 334, 335, 530A 1981-2\90), (5610, 5900, 7610 1981-1991), (8000, 9000, 8700, 9700, TW10, TW20, TW30 1973-1982), (3230, 3430, 3930, 4130, 4630 3\1990 and up), (4830, 5030 7\1990 and up), (5610S, 6610S, 7610S 1994 and up). (Part No: C7NN3655B)
$3.44

Ford Power Steering Pump
- For tractor models 345C, 345D, 445, 445A, 445C, 445D, 450, 455, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 655, 655A. (Part No: E7NN3K514CA)
$343.62

Ford Power Steering Hose
- Hose is .750 inch 1 wire braid, 34.250 inches long, fittings 180 degree offset ends. For tractor models 600, 620, 630, 640, 650, 660, 800, 820, 840, all 1957 and newer. (Part No: VPJ4034)
$33.53

Ford Power Steering Pump Repair Kit
- Kit repairs the following pumps: E6NN3K514EA, D8NN3K514KC, E0NN3K514AB, and E6NN3K514AB. For tractor models (2000, 3000, 4000, 5000 1965-9\1968), (8000, 8600, 9000, 9600 1\1968-2\1973), (Industrials 3400, 3500, 4400, 4500 1965-4\1970). (Part No: DHPN3A674B)
$7.88

Ford Power Steering Pump
- This power steering pump used with flair fitting on models using Steering Gear Box, pump has Relief Valve. For tractor models 4100, 4600, 4610, 4630, 5100, 5600, 5610, 6600, 6610, 7100, 7600, 7610. Rated Pressure 725-1305 at 500-2000rpm. Safety valve Opening Pressure 942-1087 PSI, Safety Valve Full Open: 1087-1305 PSI. Unit designed for o-ring fitting, not supplied w\pump. This pump fits tractors with JIC fittings. (Part No: E6NN3K514PA99M)
$374.68

Ford Reservoir Cap, Power Steering Pump
- Used on E6NN3K514EA, D8NN3K514GC, C9NN3A674D Power Steering Pumps. For tractor models 231, 233, 2600, (3500, 3550 5\1970 to 1975), 3600, (4100 4\1970 to 1975), (420, 4600, 5600, 6600, 7600 1975 to 1981), 4600SU, (5100, 7100 7\1970 to 1975). (Part No: D2NN3A006B)
$2.82

Ford Steering Shaft & Nut Assembly
- Right hand spiral. For tractor models 3500, 3550, (4000 with manual steering all years with power steering from 1965-1970), 420, 515, 535. (Part No: D2NN3A710D)
$110.33

Ford Steering Wheel with Cap
- 17-1\2 inch diameter, 3-1\2 inch dish, 15mm, 36 splines. For tractor models 1910, 2110. (Part No: SBA334300010)
$32.76

Ford Steering Sector Gear
- 5 teeth, 36 splines, 15\16 inch-1 inch tapered. For tractor models 1300, 1500, 1700. (Part No: SBA334130041)
$133.09

Ford Steering Wheel
- 17-5\8 inch diameter, 11\16 inch splined hub, 3 Covered Spokes. For tractor models 231, 335, 340, 445, 530, 540, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3600, 3610, 3910, 4000, 4000SU, 4400, 4500, 4600, 4600SU, 4610, 5000, 5100, 5200, 5600, 5610, 6600, 6610, 7000, 7100, 7200, 7600, 7610. (Part No: C5NN3600C)
$33.75

Ford Steering Wheel Nut, Black
- Nut, Steering Wheel ACORN Style. 5\8-18, Black. For tractors: 9N, 2N {1939-1947}. (Part No: 351103CCBlack)
$6.21

Ford Steering Wheel Nut, Black
- Nut, Steering Wheel ACORN style. 11\16 inch-20, black. For tractors: 8N, NAA {1948-1954}, 600, 700, 800, 900, NAA. (Part No: 351114CCBlack)
$5.46

Ford Steering Shaft & Nut Assembly
- Left Hand Spiral. For models: 5000 and 7000, 1965 to 8\1970 with power steering. Power steering cylinder in front support. This shaft is approximately 28 13\16 inches long. It replaces C5NN3A710A. (Part No: C5NN3A710A)
$168.25

Ford Steering Wheel
- 17 inch diameter, 1 1\4 inch hub diameter, 48 spline. For tractor models Dexta, Super Dexta. (Part No: 957E3600)
$39.00

No
Picture
Ford Power Steering Pump
- For tractor models 5530, 6530, 7530. (Part No: 5113130)
$258.27

Ford Steering Valve
- For tractor models 601, 611, 621, 631, 641, 651, 661, 671, 681, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 4000, except row crops. (Part No: 310863)
$543.94

Ford Power Steering Pump
- For tractor models 8530, 8630, 8730, 8830, TW30, TW35. Replaces D8NN3K514JD, 83924997, 81871789. (Part No: D8NN3K514JC)
$660.01

Ford Steering Shaft Gear Thrust Bearing Retainer
- For tractor models 1801, 2130, 3500, NAA, NAB, 2000, 2031, 2100, 2110, 2111, 2120, 2131, 2150, 230A, 2300, 231, 2310, 233, 2600, 2610, (3000 from 1-1965 to 12\1974), 3055, 3100, 3110, 3120, 3150, 3300, 3310, 333, 3330, 335, 3400, 3600, 3610, 3900, 3910, 4000, 4031, 4100, 4110, 4120, 4121, 4130, 4140, 501, 530A, 531, 541, 600, 601, 611, 620, 621, 630. (Part No: 8N33581)
$2.94

Ford Steering Shaft Gear Thrust Bearing Retainer
- For tractor models 631, 640, 641, 650, 651, 660, 661, 671, 681, 8N, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881. (Part No: 8N33581)
$2.94

Ford Steering Shaft Repair Kit, Upper
- This Steering Shaft Repair Kit is for the upper shaft on models Dexta, Super Dexta. Contains upper shaft, 2 cups and 15 steel balls. (Part No: S.67786)
$81.38

Ford Steering Arm, RH
- For tractor models 4000, 4100, 4330, 4340. (Part No: C5NN3130C)
$103.46

Ford Steering Arm, LH
- For tractor models 4000, 4100, 4330, 4340. (Part No: C5NN3131C)
$145.13

Ford Power Steering Valve Assembly
- For tractor models 2000, 3000, 4000SU, 2600, 3600, 3900, 4100, 4600SU, (2310, 2610, 2910, 3610, 4110, 4610SU >9\1984), 2110LCG, 3400, 230A, (231 > 9\1984), 334, 335, 530A, 531, 532. (Part No: C5NN3A730B)
$532.32

No
Picture
Ford Ball Bearings, Steering Gear
- Package of 20, used with E1ADKN3556 Ball Race. 14 used for main nut, 10 used in upper shaft bearing, 10 used in lower shaft bearing. For tractor models Major, Super Major, 2600, 2610, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 6600, 6610, 7000, 7600. Replaces 353075S. (Part No: 83424343)
$5.10

Ford Steering Gear, Inner Race
- Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee. (Part No: S.67672)
$7.49

Ford Steering Gear, Outer Race
- Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee. (Part No: S.67673)
$15.38

Ford Steering Gear, Aftermarket Box
- This Double Sector is used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee. (Part No: S.67671)
$63.67

Ford Steering Gear, Aftermarket Box
- This Single Sector is used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee. (Part No: S.67670)
$63.78

Ford Steering Gear, Shaft
- Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee. (Part No: S.67668)
$130.01

Ford Steering Gear, Ball Bearing
- 3\8 inch ball, used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee. 22 balls required per box, 11 for each bearing, price is per ball. (Part No: S.10903)
$0.33

Ford Steering Sector Kit
- This Steering Sector Kit is for 1 side, 2 kits used per tractor. Kit contains adjuster bolt, nut, washer, o-rings, shims, and felt seal. (Adjuster Bolt is Allen Head Type, not slotted like original). For tractor models (8N 1950-1952), Jubilee, NAA, 600, 800, 601, 801, 2000, 4000 all before 1965. (Part No: S.67109)
$16.39

Ford Steering Motor
- For tractor models 5610, 6610, 6810, 7610, 5610S, 6610S, 7610S, 7810S, 5900. Replaces OEM 86602590. (Part No: E4NN3A244AA)
$651.36

Ford Steering Column Bearing Spring
- This Steering Column Bearing Spring is for tractors without power steering 8N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1948-1964). (Part No: 8N3520)
$2.95

Ford Steering Column Seal
- This Felt Dust Seal is for the top of steering column. Tractors: 8N, through 4000 4 cylinder. (1948-1964). (Part No: 8N3570)
$1.50

Ford Steering Column Spring Seat
- For Steering Column Bearing (without power steering). Tractors: 8N and up (1948 to 1964). (Part No: 8N3518)
$3.50

Ford Steering Shaft Bearing Assembly
- For Steering Column (without Power Steering). Ford tractors 1948 to 1964. Replaces 8N3517, C5NN3N716A. For models without Power Steering NAA, 1801, 2000, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4031, 4040, 4110, 4121, 4130, 4131, 600, 601, 700, 701, 800, 801, 8N, 900, 901. (Part No: 8N3517)
$17.50

Ford Power Steering Hose
- Single Wire, Braid Hose Assembly with fittings, overall length 31 inches. For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 600, 700, 800, 900. Replaces OEM C0NN3A714B, C0NN3A717B, C0NN3C769A, C0NN3C770A. (Part No: FPH30)
$33.78

Ford Steering Shaft Bearing Kit
- Kit consists of 6-TIM quantity 2, 5BC-TIM quantity 2, and 4CB-TIM quantity 2. For tractor models 9N, 2N. (Part No: STEERING_KIT)
$64.00

Ford Power Steering Cylinder Repair Kit
- This Power Steering Cylinder Repair Kit fits Ford Steering Cylinders with .625 inch rod, includes seals, piston and retainer. (Part No: CAPN3301A)
$22.43

Ford Power Steering Cylinder Seal Kit
- For original equipment with 1\2 inch rod. Fits multiple Ford Tractors using original E2NN3A540BA and E2NN3D547AA cylinders. Models: 600, 601, 800, 801, 2000, 3000, 4000. Replaces Ford repair kit number CAPN3301B. Contains one each of the following: AJ33656A, C1AA3A752A, C0AA3A753A, C1AA3A751A, 371033S. Verify your original equipment manufacturer cylinder part number before order. (Part No: CAPN3301B)
$27.75

Ford Power Steering Seal Kit
- Orbital Control Valve and Gear Box Gasket and Seal Kit. For tractor models (4000, 5000 from 7\1970 and up), 4600, 5600, 6600, 7000, 7600. Replaces EGPN3N503AA. (Part No: EDPN3500A)
$13.50

Ford Filter, Power Steering
- For tractor models 5640, 6640, 7740, 7840, 8240, 8340, TS90, TS100, TS110. (Part No: F0NN3N976AA)
$22.35

Ford Steering Wheel Spinner, Bare Aluminum
- Comes with mounting hardware. (Part No: R3275)
$7.12

Ford Steering Wheel Spinner, Black
- Comes with mounting hardware. (Part No: R3276)
$6.60

Ford Steering Wheel Spinner, Red
- Comes with mounting hardware. (Part No: R3277)
$7.20

Ford Steering Wheel Spinner, Green
- Comes with mounting hardware. (Part No: R3278)
$7.20

Ford Steering Wheel Spinner, Blue
- Comes with mounting hardware. (Part No: R3279)
$7.20

Ford Steering Wheel Spinner, Yellow
- Comes with mounting hardware. (Part No: R3280)
$7.20

Ford Steering Wheel Spinner, Orange
- Comes with mounting hardware. (Part No: R6323)
$6.69

Ford Power Steering Pump
- For tractor models 2000, 2100, 2110, 3000, 3100, 4000, 4100, 4110, 4500, 5000, 5100, 5200, 535, 7000, 7100, 7200. Also replaces 81816585. (Part No: C7NN3A674F)
$481.62

Ford Steering Wheel Dome Nut Washer
- With beveled edge. For tractor models 8N, NAA, Jubilee, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2000 (4 cylinder), 2030, 2111, 2120, 2130. (Part No: 356515S)
$4.21

Ford Steering Wheel Dome Nut Washer
- With beveled edge. For tractor models 4000 (4 cylinder), 4030, 4040, 4121, 4130, 4140 (1948 THRU 1964). (Part No: 356515S)
$4.21

Ford Steering Column Grommet
- Models: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 4 cylinder 1955-1964), 1801. (Part No: NCA3578A)
$9.40

Ford Steering Wheel Nut
- This steering wheel Nut is Chrome. For Dexta, Super Dexta (Part No: 957E3518B)
$12.32

Ford Steering Wheel Nut
- Zinc Plated Steel Nut, Steering Wheel Acorn Style. 5\8-18 for 9N and 2N (1939-1947). Head uses a 1 inch wrench. (Part No: 351103S)
$3.50

Ford Power Steering Pump
- This Power Steering Pump is for models 600, 800, 601, 801, 2000, 4000, 701, 901. Gas and Diesel. Replaces C3NN3A691B. Includes mounting bracket, belt and replacement pressure hose. Verify part number if possible as there were more than one type during production runs. (Part No: S.60189)
$650.06

Ford Steering Gear Housing Gasket
- For tractor models 9N after serial number 47509 and all 2N. Replaces 9N7223B (Part No: 9N7223B)
$3.75

Ford Power Steering Conversion Kit
- This kit contains all parts needed to convert manual steering on some FORD 4000 with straight front axle and 4600 tractors to power steering. NOTE: Not recommended for applications with front end loaders. For tractor models 4000 (1965 YEAR> 3 CYLINDER TRACTORS, 4600. (Part No: FD100)
$531.31

Ford Steering Shaft and Nut Assembly
- For tractor models 1100, 1200, 1110, 1210. Approximately 21 11\16 Inches Long. Replaces original part number SBA334291450 (Part No: SBA334291450)
$124.08

Ford Power Steering Pump, Belt Driven
- Redesigned Pump uses a bearing instead of original bushing. Can be adapted to tractors using Char-Lynn Power Steering with Eaton Pump. Does not include brackets, top mounted reservoir or pulley. Shaft diameter measures .670 inches and the shaft length (where pulley mounts) measures .575 inches. There is a 2 inch thick pump housing (where bracket bolts to). SOME FORD APPLICATIONS WILL REQUIRE A NEW PRESSURE HOSE TO BE MADE FOR 3\8 inch MALE INVERTED FLARE. Pressure is preset at 1.32 GPM. For tractor models (2000, 4000 4 Cylinder), 601, 701, 801, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2111, 2120, 2130, 4030, 4040, 4121, 4130, 4140 1958 to 1964. For tractors with canister on top pump, (700, 740, 900, 950, 960 1955 and UP for tractors with canister on top pump). Replaces: C0NN3A674H and C3NN3A674C. Can be used with ABC1417 or EBJ33556A Pulley. (Part No: S03-1003)
$384.33

No
Picture
Ford Steering Arm (RH)
- For tractor models 1300, 1310, 1500, 1510. (Part No: SBA334520740)
$55.81

Ford Steering center arm pivot shaft bushing
- Bushing, 1 inch long, for power steering center arm pivot shaft. Tractors 5000, 7000, 2 used from 1965 to 1\1966. Upper bushing for center arm pivot shaft, 1 used on tractors 5000, 7000 (2\1966-1975); 5600, 6600, 7600 (1975-1981); 5610, 6610, 7610 (1981-3\1985). (Part No: C5NN3179A)
$3.75

Ford Power Steering Pump Repair Kit
- This Seal and O-Ring Kit is for Power Steering Pumps with External Reservoirs. Fits; (2000, 3000, 4000 and 5000 1\1965-9\1968), (8000, 8600, 9000, 9600 1\1968-2\1973), Industrial; (3400, 3500, 4400, 4500 1\1965-4\1970), (2110LCG, 4110LCG 1965-9\1968). Contains: (2) D2NN3R542A O-Ring, (2) D2NN3R543A O-Ring, (2) E0NN3N529AA Seal, (1) E1ADKN994567 Seal, (2) 9861410 O-Ring, (1) 134373 O-Ring, (1) 9991976 O-Ring, (1) 379275S94 O-Ring, (1) 9617873 O-Ring. Replaces OEM part number DHPN3A674A. (Part No: DHPN3A674A)
$44.91

Ford Steering Wheel Washer
- This steering wheel washer is 1.497 inch outside diameter, 0.645 inch inside diameter and is 0.180 inches thick. It is used on Ford 9N and 2N. It replaces original part number 2N3673. (Part No: 180577M1)
$2.24

Ford Steering Shaft Bearing
- This steering shaft bearing fits the following tractor models: 1100, 1200, 1110, 1210, 1215, 1120, and 1220. It measures: 1.378 inches outside diameter, 0.91 inches inside diameter, and 0.43 inches think. Replaces: SBA334290810, 15BW02, and 66811-41140. (Part No: SBA334290810)
$9.35

Ford Power Steering Cylinder
- This Power Steering Cylinder has 5\8 inch diameter rod, 7\16 inch diameter threaded end. Replaces original part numbers D4NN3A540A (right hand) and D4NN3A547A (left hand). Used on 2000, 2100, 2110, 2120 COMPACT TRACTOR, 2150, 230A, 231, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3150, 3330, 335, 3400, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4330, 4340, 4600SU, 4610SU, 530A, 531, 532 SQUARE BALER, 601, 801. OEM numbers D4NN3A540A, D4NN3D574A, E9NN3A540AA. (Part No: D4NN3A540A)
$227.98

Ford Steering Box Seal
- This Steering Box Seal is used on the Upper and Lower Sector Arm Shafts. It is used on Fordson Dexta and Super Dexta. Replaces original part numbers E45LA9 and 81717105. Also replaces various manufacturer part numbers: K37498K, AE9520, 10755K, 126986, 24880537, 273150, 2H1746, 2H3917, 2J1746, 623E3591, 7044-17, 91225, A41176, AK37498, AN130664, D23962, D25015, D95141, E4246, E4246E, E45LA9, N130664, QX89942, E45CA9 (Part No: 1893623M1)
$3.14

Ford Steering Shaft Upper Seal
- This upper steering shaft seal is used on Ford Dexta and Super Dexta. It replaces original part numbers E44LA9 and 81800948. Also replaces various manufacturers part numbers CH14788, 194197-24370 (Part No: E44LA9)
$2.91

No
Picture
Ford Steering Wheel
- This 3 spoke steering wheel comes with a cap. For models 1100, 1110, 1200, 1210, 1120, 1215, 1220, 1320, 1520, 1620, 1720, 1920, 2120, 3415, TC30, T1510, T1520. (Part No: SBA334300050)
$51.66

Ford Power Steering Cylinder
- This power steering cylinder is right hand on 4 wheel drive and left hand on 2 wheel drive. It measures 14.75 inches long and comes with ball joints has hydraulic ports of 1\4 inch 18 NPT. For models 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 450, 540A, 540B, 545A, 545C, 545D, 555C, 555D, 575D, 655C, 655D, 675D, 250C, 260C. Also replaces 85999104, D8NN3D547AA, D8NN3D547AB. (Part No: 85999337)
$321.50

Ford Steering Shaft with Nut
- This Steering Shaft is 28.750 inches long. It has right hand spiral. Turning the steering wheel clockwise causes the worm nut to travel up the shaft. It replaces original part numbers C5NN3A710B, D2NN3A710A and 81842811. (Part No: D2NN3A710A)
$82.73

Ford Steering Motor
- This Steering Motor is used on Ford\New Holland Models: 3010S, 4010S, 5010S, 7010, 7810S, 8010, TB100, TB110, TB120, TB80, TB85, TB90, TT55, TT65, TT75. It replaces original part numbers 82851795 and F2NN3A244BA. (Part No: 82851795)
$543.07

Ford Steering Column Collar with Grease Fitting Hole
- This Steering Column Collar comes with dust seal and spring. Comes with a primer paint coat on cover and with the grease fitting hole. Replaces 9N3669 cap, 9N3699 spring and 9N3660 dust seal. Fits 9N and 2N. (Part No: 9N3669BPLUS)
$11.70

Ford Steering Sector Shaft Seal
- Two of these felt seals are used per tractor. It measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476 (Part No: 8N3586)
$1.10

Ford Steering Sector Shaft Seal
- Two of these felt seals are used per tractor. It measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476, C5NN3586A (Part No: 8N3586)
$1.10

Ford Power Steering Cylinder
- This power steering cyclinder is left hand on 4 wheel drive and right hand on 2 wheel drive. Hydraulic ports of 1\4 inch 18 NPT. For models 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 450, 540A, 540B, 545A, 545C, 545D, 555C, 555D, 575D, 655C, 655D, 675D, 250C, 260C. Replaces 85999338, 85999103, D8NN3A540AA, D8NN3A540AB. (Part No: 85999338)
$281.88

Ford Power Steering Cylinder Ball End
- This Power Steering Cylinder end is used with C5NN3A739G. It fits a cylinder rod with 0.500 inch number 20 fine thread. (Part No: CAPN3300A)
$51.01

Ford Steering Column Shim Kit
- This Shim Kit contains 2 - .020 Shims, 2 - .010 Shims, 2 - .005 Shims. For tractor models 8N with 2 bolt adjuster covers, NAA, Jubilee, 600, 601, 800, 801, 2000, 3000, 4000, 2600 manual steering, 3600, 3900, 2610, 3610, 3910 manual steering, 4110LCG. Replaces 251296, 8N3595C, 8N3595D (Part No: 8N3595KIT)
$11.95

Ford Steering Gear Housing Gasket
- This Steering Gear\Gear Shift Housing Gasket is used on 9N Tractors before serial number 47508. It replaces original part number 9N7223A. (Part No: 9N7223A)
$3.75

Ford Steering Column Spring
- This Steering Column Spring is used on Ford 9N and 2N tractors, 1939-1947. Replaces 9N3699 (Part No: 9N3699)
$3.95

Ford Steering Arm
- This Steering Arm is used on multiple Ford \ New Holland compact tractors. It is used as left and right hand side on: TC25, TC29, TC33, 1320, 1520, 1530, 1620, 1630, 1725. It is right hand only on TC30 and 1715. Replaces original part number SBA334524880. (Part No: SBA334524880)
$119.23

Ford Steering Shaft Seal
- This Steering Shaft Seal is for 2-wheel drive models. It measures 1.386 inch outside diameter, 0.866 inch inside diameter and 0.374 inch in width. Tractors: 2100, 2110, 2120, 2150, 3055, 3100, 3120, 3150, 3400, 4110, 4140, 4410 (1965-1975), 2600, 3600, 3900, 4100, 4600SU, 335, 532 (with or w\o cab, 1975-3\1976; w\o cab 4\1976-1981), 2310, 2610, 2910, 3610, 3910, 3910SU, 4110SU, 4610SU, 230A, 234, 334, 530A (w\o cab 1981-9\1984). Replaces D5NN3N632A, E1NN3N632AA and 83929295. (Part No: E1NN3N632AA)
$6.17

Ford Steering Arm
- This Steering Arm is used on Ford\New Holland Models: 5700, 6700, 7700, 6710, 7710, 7810, 7910, 8210, 8700, 9700, TW10, TW20, TW30 Replaces original part number D5NN3131B (Part No: D5NN3131B)
$241.50

Ford Steering Arm
- This is a Left Hand Steering Arm used on Ford 4600 with Power Steering. It has a 1.464 Inch Diameter Spindle Shaft Opening. Replaces original part number D4NN3131C (Part No: D4NN3131C)
$158.70

Ford Power Steering Cylinder End
- Power Steering End left hand (outer), 1.250 inches-12 right hand thread, 2.875 inches long to center of post. Tractors: 5110, 5610, 5610S, 5900, 6410, 6610, 6610S, 6810, 6810S, 7010S, 7610, 7610S, 7810, 7810S. Replaces E3NN3N981AA, 83948964. (Part No: E3NN3N981AA)
$41.10

Ford Power Steering Cylinder End
- Power Steering End right hand (inner), .875 inch-14 thread female, 3.625 inches long to center of post. Tractors: 3010S, 4010S, 5100, 5110, 5600, 5610, 5610S, 5900, 6410, 6600, 6610, 6610S, 6710, 6810, 6810S, 7010, 7100, 7600, 7610, 7610S, 7810, 7810S, 8010. Verify Part number to ensure proper fit. (Part No: E3NN3B539AA)
$22.43

Ford Power Steering Cylinder End
- This end is 2.370 inches long, has a 1.000 inch threaded shaft with 0.687 inch diameter and 18 right hand threads. Replaces D9NN3A302AA, E3NN3A302AA, C5NN3A302D, 83958351, 83936699, 83918929, 83901713. (Part No: D9NN3A302AB)
$30.38

Ford Power Steering Cylinder End
- This Steering Cylinder end is 2 inches from the center of the ball joint to the end of the threaded rod. The shaft is 0.687 inch-18 right hand thread. Used on 445, 550, 555, 5550, 555A, 555B, 655, 655A, 7500, 755B. Replaces 83901714, 83918928, 83936901, 83958352, C5NN3A303A, D9NN3A303AA, E3NN3A303AA. VERIFY OEM PART NUMBER TO ENSURE CORRECT FIT. (Part No: D9NN3A303AB)
$25.13

Ford Power Steering Gear Bearing and Races
- These Bearing and Races are used on the Steering Worm Shaft on power steering models; 2000, 3000, 4000SU, 3400, 4110, 4400, 2600, 3600, 3900, 4100, 4600SU, ``2610, 3610, 3910, 230A, 530A (1965-84). Replaces LA33586A (Part No: LA33586A)
$34.13

Ford Steering Shaft and Worm Gear
- This Steering Shaft and Worm Gear is approximately 23 15\16 Inches Long. It is used on Ford 1000, 1600 compact tractors. It replace SBA334290220 (Part No: SBA334290220)
$228.14

Ford Steering Shaft and Nut Assembly
- This Ford 1900 worm shaft is for manual steering. It is approximately 25 11\16 inches long. It replaces SBA334290720. (Part No: SBA334290720)
$228.14

Ford Steering Sector Shaft
- This Steering Sector Shaft is used on late production 1000 and 1900 tractors. The A diameter is 1.100 and the B Diameter is 1.030 inches. Measure before ordering. Replaces original part number SBA334290231 (Part No: SBA334290231)
$196.20

Ford Steering Sector Shaft
- This is a right hand single steering sector shaft used on 2310, 2610, 2810, 2910, 3610, 3910, 4610. It replaces parts numbers 83947218, E4NN3N575AA. (Part No: E4NN3N575AA)
$96.59

No
Picture
Ford Power Steering Pump Bracket
- This Power Steering Pump Mounting Bracket is for pump part number S.60189 for the following models: 600, 601, 701, 800, 801, 901, 2000, 4000. (Part No: S.60189)
$55.28

Ford Steering Sector Shaft
- This is a left hand double steering sector shaft used on Ford 2310, 2610, 2810, 2910, 3610, 3910, 4610. It replaces original part numbers 83947219 and E4NN3N576AA. (Part No: E4NN3N576AA)
$109.02

Ford Power Steering Control Valve Housing
- This Power Steering Control Valve Housing is used on Ford Models: 5000, 7000, 5600, 6600, 7600. It replaces original part number C9NN3C516B (Part No: C9NN3C516B)
$125.08

Ford Power Steering Cylinder
- This Power Steering Cylinder is used on Ford 5640, 6640, 7740, 7840, 8240, 8340, TS90, TS100, TS110. It replaces original part numbers E9NN3A540BC, 81869701. VERIFY OEM PART NUMBER TO ENSURE CORRECT FIT. (Part No: E9NN3A540BC)
$385.02

Ford Power Steering Cylinder
- This Power Steering Cylinder is used on 3910V, 4110V, 445 Indust\Const, 4610V, 550 Indust\Const, 555 Indust\Const, 5550 Indust\Const, 555A Indust\Const, 555B Indust\Const, 655 Indust\Const, 655A Indust\Const, 7500 Indust\Const, 755B Indust\Const. It has a 3\4 inch rod. It is used both left and right side. Replaces original part numbers 86516202, E6NN3A540CA, E3NN3A540AA (Part No: E6NN3A540CA)
$386.32

Ford Power Steering Cylinder Shaft
- This Power Steering Cylinder Shaft is used on Ford 4500, 515 and 535. It replaces original part number C5NN3A747A (Part No: C5NN3A747A)
$255.30

Ford Power Steering Cylinder Shaft
- This Power Steering Cylinder Shaft is used on 5610, 6610, 7610, 7810, 5900, 5640, 6640, 7740, 7840, 8240, TS90, TS100, TS110. Use with EFPN3301A repair Kit. It replaces original part number E3NN3A747AA and 83948961 (Part No: E3NN3A747AA)
$137.02

Ford Power Steering Cylinder Repair Kit
- This Power Steering Cylinder Repair Kit is used with E3NN3A747AA shaft. It replaces 83949861, EFPN3301A, EFPN33301A (Part No: EFPN3301A)
$36.38

Ford Power Steering Cylinder Shaft
- This Power Steering Cylinder Piston and Rod and a 2.234 Outside Diameter. It is used on 5700, 6700, 7700, 7710, 7910, 8210, 8700, 9700, TW10, TW20, TW30. Use with DGPN3301B Seal Kit. Replaces original part number D5NN3N797A, D5NN3N699A (Part No: D5NN3N797A)
$151.33

Ford Power Steering Cylinder Seal Kit
- This Power Steering Cylinder Seal Kit is used with D5NN3N797A Shaft on 5700, 6700, 6710, 7700, 7710, 7910, 8210. (Part No: DGPN3301B)
$41.85

Ford Power Steering Cylinder Shaft
- This Power Steering Cylinder Shaft is used on 5640, 6640, 7740, 7840, 8240, 8340, TS90, TS100, TS110. Use with EFPN3301A Seal Kit. Replaces original part number E9NN3A747AA (Part No: E9NN3A747AA)
$124.15


Click here to see parts by model







PayPal


Customer Service
Monday - Friday
9:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure


  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2015 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.