(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford Tractor Sleeve


Click here to see parts by model


Ford Piston and Sleeve Set
- Super Piston Set For 8N, 9N, 2N Increased horsepower up to 5% by use of.0825 wall sleeve, same outside diameter as heavy wall sleeve. Can be used in any application where.090 wall thickness sleeves are used..050 wall sleeves, .0825 oversize 4-ring pistons. Comes with Sleeves, Pistons, Rings and Retainers. (Part No: PK11)
$230.40

No
Picture
Ford Pistons and Sleeves
- Pistons and Sleeves are located in the Pistons and Sleeves category Use your BACK key and select this category. (Part No: Various)
$107.00

Ford Sleeve and Piston Kit, 172 Gas, STD
- For models: 800, 801, 900, 901, 4000, Jubilee. All with 172 CID Gas, 4 Cylinder (1955-1964). Standard bore. For 4000 (1962-1964) that were sleeveless require block be bored. Sleeve and Piston Kit contains: pistons, sleeves, piston pins, retainers and chrome top and chrome steel rail oil control rings. (Part No: PK15G1)
$331.74

Ford Piston and Sleeve Kit, STD, 172 CID Diesel
- For 801, 901, 4000. All with 172 CID, diesel, 1953-1964. Piston and Sleeve Kit contains: (4) pistons, sleeve and rings. 3.9 inch bore. (Part No: PK20)
$590.42

Ford Piston and Sleeve Kit
- For Dexta with 144 CID and 152 CID Perkins engines, 1953-1964. Piston and sleeve kit. Contains pistons, sleeves and rings. For 1962 and prior, requires boring block to 3.6 inch and will increase power. Kit is For 1 Engine. (Part No: PK17A)
$474.50

Ford Piston and Sleeve Kit
- For 5000 with 256 CID Diesel, 4 Cylinder, 4\1968-1975. Piston and sleeve kit contains pistons, pins, retainers and rings. Also available in Oversizes of.020 inch (PRK256-020) and.030 inch (PRK256-020). When ordering, specify oversize amount and appropriate part number in comments section of order form. (Part No: PRK256)
$386.92

Ford PTO Output Shaft Sleeve
- For (5640, 6640, 7740, 7840, 8240, 8340, all Non-Shiftable 11\1991 and up), (7810, 7910, 8210, all Non-Shiftable 1982-10\1991), (5610S, 6610S, 7610S, 7810S, all 1\1994 and up), (TW10, TW20, all 1979-1982), (5610, 6610, 6710, 7610, 7710, all 1981-10\1991), (TW15, TW25, TW5 all 1983-2\1990), (7010S 4\1996 and up). PTO Output Shaft Sleeve for 540 & 1000 RPM Two Speed Independent PTO. (Part No: D8NNB733AC)
$110.72

Ford Cylinder Sleeve, .040
- For tractor models 8N, 9N, 2N. This Sleeve is .040 thin-wall for 3 ring and 4 ring pistons. Measures 3.268 inches outside diameter, 3.1875 inside diameter. Priced as each. (Part No: C0NN6055B)
$24.74

Ford Cylinder Sleeve, .090
- This cylinder sleeve is for tractor models 8N, 9N, 2N. This Sleeve is .090 Heavy-wall for 3 ring and 4 ring pistons. Measures 3.368 inches outside diameter, 3.1875 inside diameter. Priced as each. (Part No: 8N6055B)
$23.24

Ford Piston and Sleeve Kit, 3 Ring, .090 Sleeves
- Kit, (4) sleeves, pistons, chrome rings, piston pins and pin retainers. For 8N, 9N, 2N (Part No: APN6055A)
$191.82

Ford Basic Overhaul Kit, 120 Gas, 4-ring Pistons, .040 Sleeves
- 120 CID 4 cylinder gas 3-3\16 standard bore. Basic engine kit contains, thin wall .040 sleeves, 4 ring pistons, rings, pins & retainers, pin bushings, complete gasket kit. Bearings NOT included & must be ordered separately. For 8N, 9N, 2N. (Part No: BEKF102A-LCB)
$229.43

Ford Basic Overhaul Kit, 120 Gas, 4-Ring Pistons, .090 Sleeves
- Made by TISCO. 120 CID 4 cylinder gas 3-3\16 standard bore. Basic engine kit contains, thick wall .090 sleeves, 4 ring pistons, rings, pins & retainers, pin bushings, complete gasket kit. Bearings NOT included & must be ordered separately. For tractor models 8N, 9N, 2N. (Part No: BEKF105A-LCB)
$242.95

Ford Basic Overhaul Kit, 120 Gas, 3-ring pistons, .090 Sleeves
- 120 CID 4 cylinder gas 3-3\16 standard bore. Basic engine kit contains, thick wall .090 sleeves, 3 ring pistons, rings, pin & retainers, pin bushings, complete gasket kit. Bearings NOT included & must be ordered separately. For tractor models 8N, 9N, 2N. (Part No: BEKF106A-LCB)
$200.06

Ford Sleeve
- Standard sleeve for 134 CID gas engine. For tractor models: 500, 501, 600, 601, 700, 701, NAA, 2000. Replaces B3NN6055A. (Part No: EAE6055E)
$27.89

Ford Piston Sleeve, 172 Gas or Diesel Engine
- Standard sleeve with 3.9 inch bore, (4.1 inch outside diameter, press fit) for 172 CID gas or diesel engines on: 800, 801, 900, 901, 4000. (Part No: EAF6055D)
$32.92

No
Picture
Ford Piston and Sleeve Kit 172 Gas
- Kit, press-in sleeves, pistons, and rings for one engine. For 4000, 800, 801, 900, 901. All with 3.9 inch bore. Has 4.1 inch outside diameter. (Part No: FPN6055A)
$266.99

No
Picture
Ford Piston and Sleeve Kit 172 Gas
- Kit, drop-in sleeves, pistons, and rings for one engine. For 4000, 800, 801, 900, 901. All with 3.9 inch bore. Has 4.098 inch outside diameter. (Part No: FPN6055B)
$285.79

Ford Sleeve & Piston Kit - 134 Gas - Super Power Set
- This Sleeve and Piston Kit is for 134 CID Gas engine. 3-1\2 inch overbore for increased power, authothermic pistons, chrome top rings, chrome steel segment oil rings. For 2000, 501, 600, 601, 700, 701, NAA. (Part No: PK110)
$247.19

Ford Cylinder Sleeve, .005 oversize .040
- Oversize replacement for .040 thickness sleeves for larger cylinder block holes. Outside sleeve diameter is 3.273 inches - .005 larger than original. Sleeve is .0425 thickness to retain original piston bore of 3 3\16 inches. For tractor models 8N, 9N, 2N. (Part No: S1135A2)
$41.83

Ford Cylinder Sleeve, .005 oversize .090
- Oversize replacement for .090 thickness sleeves for larger cylinder block holes. Outside sleeve diameter is 3.373, .005 larger than original. Sleeve is .0925 thickness to retain original piston bore of 3 3\16 inches. For 8N, 9N, 2N. (Part No: S1137-2)
$42.86

Ford Cylinder Sleeve, .050
- This sleeve is for use with the .0825 oversize pistons. Measures 3.368 inches outside diameter, 3.270 inside diameter. For tractor models 8N, 9N, 2N. (Part No: S1138)
$41.88

Ford Overhaul Kit, Comprehensive, 120 Gas, 4-ring Pistons, .090 Sleeves
- 4 RING PISTONS, .090 SLEEVES, 9\16 OIL PUMP GEAR WIDTH. Made by TISCO. Complete engine kit contains, thick wall .090 sleeves, 4 ring pistons, rings, pins & retainers, pin bushings, complete gasket kit, intake & exhaust valves, springs, spring retainers, guides, retainers & seals, valve keys, upper & lower radiator hose, air cleaner hose, oil pump kit, timing gear, fan belt, points & condenser, spark plugs, oil filter, basic carb kit. For, 8N, 9N, 2N. NOTE: If you have rotating valves you will also need 4 x 8N6505C exhaust valves and 4 x 8N6534B Valve Rotor Assembly. These are sold separately. If your keepers or keys on the exhaust or intake valves are the same, you DO NOT have rotating valves. If they are different then you DO. Bearings not included, they can be ordered separately from our Engine Bearings category. (Part No: 4-9H-LCB)
$480.86

Ford Basic Overhaul Kit, 120 Gas, 3-ring pistons, .040 Sleeves
- 120 CID 4 cylinder gas 3-3\16 standard bore. Basic engine kit contains, thin wall .040 sleeves, 3 ring pistons, rings, pin & retainers, pin bushings, complete gasket kit. Bearings NOT included & must be ordered separately. For tractor models 8N, 9N, 2N. (Part No: BEKF103A-LCB)
$182.85

Ford Sleeve, PTO Intermediate Shaft
- Has 6 and 26 splines. For 6 and 8 Speed transmissions on models: 2000, 2310, 2600, 2610, 2810, 3000, 3600, 3910. Fits INDUSTRIALS: 231LCG, 234, 333, 334, 340, 340A, 340B, 3500, 420, 445, 515, 531LCG, 532, 535, 540, 540A, 540B, 545, 545A (with Transmision or live PTO). (Part No: C5NNN705A)
$44.27

Ford Piston Sleeve
- Engines 401 CID diesel and turbo diesel, 192 CID gas, 201 Gas and diesel, 256 CID gas and diesel, 256 turbo diesel, 233 diesel, 268 non turbo and turbo diesel. Semi-Finished 4.4 inch bore used when boring non sleeved engine. For tractor models 3000, 4000, 4600, 4610, 5000, 5600, 5700, 6000, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Part No: SD753)
$32.25

Ford PTO Shaft Sleeve Bushing, 1-1\8
- For 1-1\8 inch PTO shafts (NOT 1-3\8 inch) 1.113 inch inside diameter, 1.620 inch outside diameter, 1 inch thick. For tractor models 9N, NAA (1953-54), 2N, 8N, NAB, 600, 700, 800, 900. (Part No: 9N735B)
$5.10

No
Picture
Ford Piston Sleeve, Semi Finished, 4.2 Inch Bore
- Used when boring non sleeved engine, liner inside diameter 4.2 inch, outside diameter 4.35 inch . For tractor models 175 CID Diesel on; (2000 1965-1975), (2600 1975-1981), (3000 1965-1975), (4000 1965-3\1968). 192 GAS engine on; (3610 1981-4\1982), (3910 1981-4\1982), 233 Diesel engine on; (5000 1965-3\1968). (Part No: SD756)
$36.84

Ford PTO Shaft Sleeve
- For tractor models 2000, 4000, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. All with 1 3\8 inch PTO diameter. Replaces 310087. (Part No: E7NN797BA)
$10.70

Ford Piston and Sleeve Kit, 3 Ring, .040 Sleeves
- Kit contains C0NN6055B .040 sleeves, 8N6108B 3 ring pistons, chrome top & oil rail (8N6149G1) rings, pins & retainers. For tractor models 8N, 9N, 2N. (Part No: APN6055E)
$175.89

Ford Sleeve and Piston Set - 1 Hole
- 3 Ring Piston - .040 Sleeve. Contains Sleeve, Piston, Piston Rings, Piston Pin and Pin Retainer. For 8N, 9N, 2N. (Part No: SAT3A)
$46.13

Ford Sleeve and Piston Set, 1 Hole
- 3 Ring Piston - .090 Sleeve. Contains Sleeve, Piston, Piston Rings, Piston Pin and Pin Retainer. For 8N, 9N, 2N. (Part No: SAT6A)
$48.97

Ford Sleeve and Piston Set - 1 Hole
- 4 Ring Piston - .040 Sleeve. Contains Sleeve, Piston, Piston Rings, Piston Pin and Pin Retainer. For 8N, 9N, 2N. (Part No: SAT2A)
$51.49

Ford Sleeve and Piston Set - 1 Hole
- 4 Ring Piston - .090 Sleeve. Contains Sleeve, Piston, Piston Rings, Piston Pin and Pin Retainer. For 8N, 9N, 2N. (Part No: SAT5A)
$51.49

Ford PTO Shaft Sleeve Bushing, 1-3\8
- For 1-3\8 inch PTO Shafts, 1.185 inch inside diameter, 1.620 inch outside diameter. For tractor models 9N, NAA (1953-54), 2N, 8N, NAB, 600, 700, 800, 900. all with 1-3\8 inch PTO shaft. (Part No: 9N73538)
$3.72


Click here to see parts by model







PayPal


Customer Service
Monday - Friday
9:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure


  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2015 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.