(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford Tractor Oil


Click here to see parts by model


Ford Coil - Six Volt
- For tractor models 8N (1939-1950), 9N, 2N with Front Mount Distributor. Order 9N12104 gasket set separately if mounting gasket is needed. (Part No: 9N12024)
$13.88

Ford Coil, 12-Volt
- For 8N, 9N, 2N (serial number up to 263843. Front Mount Distributor 12 Volts. Order 9N12104 gasket set separately if mounting gasket is needed. Replaces 9N12024-12V. (Part No: 12VOLTCOIL)
$14.63

Ford Oil Pump Body
- For tractor models 9N, 2N, 8N to serial number 247571. For pumps with 9\16 inch gear width. Pump body assembly does not include gears. (Part No: 9N6603)
$101.43

Ford Oil Pump Body
- For 8N after serial number 247571. For pumps with 3\4 inch gear width. Pump body assembly does not include gears. (Part No: 8N6603)
$107.86

Ford Oil Pump Repair Kit
- Oil pump repair kit for gear type pump. For tractor models NAA, Jubilee with 134 CID engine. (Part No: CPN6600A)
$51.35

Ford Oil Pump with screen
- Complete Oil Pump Assembly with Lower Screen. For models: 2000, 3000, 4000, 5000, 7000, 2600, 3600, 3900, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532, 535, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 5900, 3230, 3430, 3930, 4130, 4630, 4830, 5030. Replaces E1NN6600DA, E1NN6600DC, E1NN6600DB. (Part No: E1NN6600DD)
$63.41

Ford Radiator with Oil Cooler
- For the following tractors with oil cooler, 3 cylinder GAS 158 CID or 158 CID Diesel: 2000, 3000, 4100, 4400 (1965 to 1975); 420, 532 with torque converter (1975 to 1981). Core is 18 inches tall and 16 inches wide. Oil cooler fittings on front side. Oil cooler can be plugged and not used if desired. For Radiator Cap order part number E2NN8100BA. Replaces original part numbers D8NN8005PA, E0NN8005MD15M, E0NN8005MA15M, E0NN8005KA15M, E0NN8005LA15M, E0NN8005MB15M. (Part No: D8NN8005PA)
$282.88

Ford Coil, High Performance (Black), 12 Volt, Oil Filled
- Pertronix Flame Thrower heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40511)
$38.57

Ford Coil - Six Volt
- This Ignition Coil is an exact replica of the original used in Ford Tractors, 1950 to 1964. It replaces: 8BA12029, D0PF12029A, D3PF12029AA, E8T12029BA. (Part No: 8BA12029)
$29.95

Ford Oil Pump Kit
- Complete Oil Pump Repair Kit. For Ford 8N, 9N, 2N prior to serial number 247570 (1939-1948). For pumps with 9\16 inch gear WIDTH. Early and late pumps are interchangeable, so measure small gear width before ordering. (Part No: APN6600A)
$44.54

Ford Oil Pump Kit
- Complete Oil Pump Repair Kit. For Ford, 8N serial number 247571 and up (1948 to 1952). For pumps with 3\4 inch gear WIDTH. Early and late pumps are interchangeable, so measure small gear width before ordering. (Part No: APN6600B)
$43.34

Ford Oil Pump, Roto Type
- For 144 CID or 172 CID DIESEL engine in tractor series: 501, 601, 701, 801, 901, 2000, 4000, including HD Industrial (1958 to 1964). Roto Type Oil Pump Hex Drive. Replaces C3NN6621B. Will retrofit 134 CID or 172 CID Gas Engine if necessary conversion parts have been installed when changing from Gear Type to Roto Type Pump. (Part No: D1NL6600A)
$112.25

Ford Oil Pump for Dexta
- For 144 CID, 3 cylinder, diesel 1957-1966 and 152 CID, 3 cylinder, diesel April 1962-1964. Oil pump used on Dexta tractor 1957-1964. Replaces 957E6600B pump. When replacing number 957E6600B oil pump, the following must also be replaced: 957E6613C and E99-CF9 pipes and 2 of 114048-ES nuts, not supplied by ATS Inc. Note: Use two 5\8 inch inverted flare nuts and ferrules with 5\8 inch copper tubing cut and formed to fit for E990CF9 pipe and 114048-ES nuts. (Part No: 957E6600C)
$57.20

Ford Oil Pressure Gauge, 50lb
- For tractor models 8N, 9N, 2N. Oil Pressure Gauge, 50 lbs., 2 inch body diameter. (Part No: 9N9273A)
$11.84

Ford Coil, High Performance (Black), 6 Volt, Oil Filled
- Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. (Not for 9N, 2N early 8N using front mount distributors) (Part No: 40011)
$35.18

Ford Oil Pump, Slotted Drive
- Slotted Drive type for 134 CID gas engine in: NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 2000 (<1964). Can also replace EAF6621B. (Part No: EAF6621D)
$84.15

Ford Oil Filler Cap
- Oil Filler Breather Cap. For tractors: 8N, 9N, 2N (1939-1950). Overall length is 3 5\8 inches, 1 1\4 inch diameter tube and tube is 1 3\8 inches long. (Part No: 9N6766)
$30.00

Ford Resistor Assembly, Ignition Coil
- For tractor models 9N, 2N. Resistor measures .5 ohms. (Part No: A8NN12250B)
$13.43

Ford Oil Pan Gasket Set
- For 8N, 9N, 2N; through 1964. 7 Piece Set. Oil Pan Gasket Set with upper and lower crankshaft rope seals, left and right oil pan gaskets, and oil pan drain plug gasket. (Part No: 9N6781)
$12.51

Ford Oil Pump
- For 144\152 Diesel engine in Dexta, Super Dexta. Replaces 3638632M91, 1641076M91, 41314078, 736513M1, 78014150, 35A74, 81804347, 957E6600B, 957E6600C. (Part No: 3638632M91)
$44.93

Ford Coil, High Performance (Chrome), 12 Volt, Oil Filled
- 12-VOLT, Pertronix Chrome Flame Thrower high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40501)
$40.25

Ford Coil, High Performance (Chrome), 6 Volt, Oil Filled
- 6-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40001)
$39.53

Ford Oil Bath Air Cleaner
- For 4600, 5600, 6600, 5900 1975 to 6\1976, 5900 after 1985, 531. 7 3\4 inch diameter, 2 1\2 inch inlet. (S.66709) (Part No: D3NN9600F)
$59.69

Ford Spin-On Oil Filter Kit
- (Convert cartridge filter to new spin-on filter). Includes: head, gasket and filter. Fits Dexta and Super Dexta. Uses filter part numbers 1447082M91 or S.40536. (Part No: S.40533)
$17.19

Ford Oil Filter
- Cartridge Type. For tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 thru 1965, 1800, 223, 240, 289, 300, 320, 332, 352, 391. Comes with gasket. Measures 4 3\4 inches long, 4 inch diameter with 3\4 inch diameter holes in each end. (Part No: CPN6731B)
$6.21

Ford Oil Filter
- Spin-On Type. For tractor models NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 5610, 6600, 6610. Also replaces, 86546614 and D9NN6714EA. (Part No: E7NN6714AA)
$3.98

Ford Oil Filter Spin On Type
- For tractor models 7000, 7600, 7700, 7610, 7710, (IND. 4 CYL with Turbo). Replaces D5NN6714A, 86546609. (Part No: S.40539)
$7.80

Ford Oil Filter Cartridge Type with Gasket
- For tractor models Dexta, Super Dexta, Power Major, Super Major (1959-1964). This filter is (4 1\2 inches in length, 2 3\4 inch outside diameter, 3\4 inch inside diameter). Replaces 957E6731, 957E6731A, 957E6731B. (Part No: 837595M91)
$4.43

Ford Oil Filter Cartridge Type with Gasket
- For tractor models: Fordson Major, Power Major (1952-1958). This Filter is (6 inches by 2 3\4 inch diameter). Replaces EPN6731A. (Part No: S.40535)
$6.17

Ford Axle Oil Seal-Outer
- For tractor models 8N to serial number 486753. inside diameter 2 3\4 inch. Rear Axle Oil Seals. Also comes as part of A8NN4248A Assembly. Packaged in quantity of 2, price is for a pair. (Part No: A8NN4251A)
$12.99

Ford Piston, 4 Ring, With 3\16 Oil Ring
- For tractor models 8N, 9N, 2N. This is a Single Piston with a standard bore, 3\16 oil ring. Piston comes with pin and lock. This price is for STANDARD. OVERSIZE ARE AVAILABLE. Please specify size of std, .020, .030, .040, or .0825 in comments box when ordering. (Part No: P1003)
$44.36

Ford Piston, 4 Ring, With 5\32 Oil Ring
- For tractor models 8N, 9N, 2N. This is a Single Piston with 5\32 oil ring, standard bore. (Part No: 2N61084RS)
$37.11

Ford Oil Filter, Spin-On
- Fits Tractor Models: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 5610, 6600, 6610 from 1965 to 10\1969. For use with spin on filter adapter 309825.(40538S) (Part No: E7NN6714AA)
$3.98

Ford Oil Filler Cap with Element
- For tractor models 8N, 9N, 2N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2030, 2031, 2111, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140. This is an original style with element. Overall length is 3 5\8 inches, 1 1\2 inch diameter tube and tube is 1 3\8 inches long. Also replaces OEM 8N6766B. (Part No: 310030)
$8.22

Ford Engine Oil Dipstick
- For tractor models 8N, 9N, 2N. (Part No: B2NN6750A)
$5.10

Ford Oil Pump
- For tractor models 8000, 9000 (1968-7\1976), 9700 (1968-1978) with 6-Cylinder Diesel Engine. (Part No: OP1123)
$172.58

No
Picture
Ford Oil Pump
- For model 8700 (8\1976-1978). (Part No: OP1122)
$202.49

Ford Oil Pump
- For tractor models TW10, TW20, TW30 (1979-1982), TW15, TW25, TW35 (1983-2\1990), 8630, 8730, 8830 (From 3\1990) with 6-Cylinder Diesel Engines. Replaces ``83951804, 83943988, D8NN6600AJ, D8NN6600AH, D8NN6600AG, D8NN6600AE, D8NN6600AC, D8NN6600AA (Part No: OP1722)
$386.40

Ford Oil Pump Gear
- For 8N, 9N, 2N. Oil pump large gear with 1 1\2 inch shaft for oil pump body number 9N6603. (Part No: 9N6608A)
$30.42

Ford Coil, Ignition 6V
- Standard 6 Volt Coil. Fits many models. (Part No: D4PE12029AA)
$10.43

Ford Coil - Universal 12V
- Universal coil fits many models. This Coil comes with an external resistor which can be removed if you need a coil with no resistance. Also comes with a mounting bracket. Coil is designed to be used on a 12 volt tractor system with the resistor or 6 volt without the resistor. Replaces C0NF12029A, D5TE12029AB, D8JL12029A (Part No: D5TE12029AB)
$7.13

Ford Coil, Ignition 12V
- Ignition Coil. This coil is used with an External Resistor if needed. There is zero resistance in the coil. (Part No: D8JL12029A)
$8.25

Ford Oil Pump
- Oil pump. For tractor models 4630, 5030, 6610, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: E1NN6600CC)
$77.28

Ford Oil Pump Gear & Shaft
- Gear and shaft assy. For tractor models NAA, Jubilee. (Part No: EAA6608C)
$64.13

Ford Oil Pump Tool
- A complete tool set with jig, punches and reamer. For tractor models 8N, 9N, 2N. (Part No: OPT20)
$117.58

Ford Oil Pressure Gauge
- For tractor models: 8N, 9N, 2N, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 2000, 4000, NAA, Jubilee. All before 1964. Oil pressure gauge, 40 pounds, 2 inch body diameter. Replaces OEM numbers Ford: FAD9273A and Massey Ferguson: 506902M92. (Part No: S.61171)
$12.72

Ford Oil Pan Gasket
- Gasket, Oil Pan. For GAS\DIESEL Engines in: 5000, 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: 87840324)
$14.14

No
Picture
Ford Oil Pan Gasket
- Gasket, Oil Pan. For tractor models 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Part No: 87840326)
$18.57

Ford Oil Pan Plug Kit
- Gasket, Oil Pan Plug and Screen Assembly. For all gas models 1939-1964. Fits 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Part No: 9N6730WG)
$14.25

Ford Oil Filter
- Engine Oil Filter, Cartridge Element, 2 quart. For 3, 4 and 6 Cylinder Engines (1965 to 1979) on models: 2000, 3000, 4000, 5000, 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW20. (Part No: DGPN6731A)
$10.80

Ford Oil Filter
- Engine Oil Filter, spin-on element, 1 quart, 3-3\4 inches x 5 inches. For Turbo Diesels. For 555C, 655C, 7000, 7600, 7610, 7700, 7710. (Part No: E8NN6714BA)
$9.65

Ford Coil Wire Assembly
- This Coil Wire Assembly is just like the original used on 8N serial number above 263842 and NAA, Jubilee. It replaces original part number 7RA14302. (Part No: 7RA14302)
$5.95

No
Picture
Ford Seal Pair, Rear Axle Oil, Inner
- Oil Seal, inner, rear axle shaft. For tractor models 700, 900. For 700, 900. (Part No: NCB4233A-PAIR)
$13.77

Ford Coil Bracket
- Universal Coil Bracket (Part No: R1940)
$3.50

Ford Oil Seal, Main Drive Gear
- Oil seal for 3 and 4 speed transmissions. Main drive gear on: 8N, 9N, 2N, 600, 700, 800, 900, NAA, NAB, Jubilee. Replaces part number: 8N7052A, 8N7052A2, C0NN7C248A. (Part No: 8N7052A)
$4.45

Ford Oil Pump Gear
- Gear, oil pump driven, width 9\16 inch. For tractor models 8N, 9N, 2N. (Part No: 52-6610B)
$23.54

Ford Oil Pump Gear
- Gear, oil pump drive, width 9\16 inch. For tractor models 8N, 9N, 2N. (Part No: 52-6614B)
$27.60

Ford Oil Pump Gear, Driven
- Gear, oil pump driven, gear width 3\4 inch. For model 8N. (Part No: 8N6610)
$32.66

Ford Oil Pump Gear, Drive
- Gear, oil pump drive, gear width 3\4 inch. For model 8N. (Part No: 8N6614)
$52.72

Ford Dipstick, Engine Oil
- Engine Oil Level Indicator measures about 14 3\4 inches overall length for 4 Cylinder Gas and Diesel, pre 1965. For tractor models 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Part No: C0NN6750B)
$6.58

Ford Oil Seal
- Oil Seal, inner for Rocker Shaft. For tractor models 5000, 5600, 5610, 6600, 6610, 7000, 7600. (Part No: C5NN3C615B)
$3.72

Ford Oil Filter
- Engine Oil Filter, spin-on, 4 inch length. For (5500 or 5550 gas or diesel), 5600, 6600, 6700. (Part No: C5NN6714B)
$10.41

Ford Oil Filler Cap
- Cap, Oil Filler. For 2000, 3000, 4000, 5000, 7000. (Part No: D0NN6766A)
$2.99

Ford Steering Rocker Shaft Oil Seal
- Oil Seal, Inner for Rocker Shaft. For tractor models 2600, 2610, 3600, 3610, 4000, 4100, 4110, 4600, 4610, Major, Super Major. (Part No: DDN3539)
$14.30

Ford Oil Pump Gear
- Gear, Oil Pump Driven. For tractor models 2000, 4000, NAA, Jubilee, 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981. (Part No: EAA6614B)
$27.69

Ford Oil Pan Kit - 3 Cylinder Engines
- SAME PAN AS C9NN6675A BUT NOT CAST IRON. THIS IS OF TIN CONSTRUCTION. Fits 3 cylinder tractors 1965 and newer: 2000, 3000, 2600, 3600, 4000, 4600. Kit includes: sheet metal pan with drain plug. NOTE, This part does not come with the shown gasket. Gasket must be ordered separately as part number F0NN6710AA. Replaces 81822143, 81874150, C9NN6675A, and F0NN6675BB. (Part No: S.66514)
$68.93

Ford Oil Filler Cap
- Fits ALL 3, 4, and 6 cylinder models that are 1975 and NEWER, Including: 2600, 2310, 2610, 2810, 2910, 3230, 3430, 3600, 3610, 3910, 3930, 4100, 4110, 4600, 4610, 4630, 5600, 5610, 6000, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710, 7810, 8210, 8530, 8630, 8700, 8730, 8830, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35. Replaces: 81823214, 83907851, 87763303, 87867228, C7NN6N609B, C9NN6N609A, D5NN6N609A (Part No: 83907851)
$8.63

Ford Oil Pump
- Oil pump replaces 528E6600. Fits Major and Super Major built from 4\1957 to 12\1964. (Part No: 82847515)
$157.32

Ford Oil Pan Gasket Set
- Fits Dexta, Super Dexta. (Part No: 957E6700)
$7.03

Ford Oil Pan Gasket Set
- Fits Major, Super Major. (Part No: E1ADDN6781C)
$16.63

Ford Transmission Oil Pump
- For tractor models 550, 555, 555A, 555B, 655, 655A, (340, 340A, 340B, 445, 445A, 450, 540, 540A, 540B, 545, 545A ALL WITH POWER REVERSE TRANSMISSION), (3000 series, 3500, 3550, 4000 series, 4410, 4500 ALL 1\1\1965 and Newer), (420, 532, 535 ALL 1\1\1975 and newer), 455 (7\1987 to 11\1988), with power reverse transmission. Replaces 530718M92, C5NN7A103F, D2NN7A103A, E4NN7A103AA, 86516596. (Part No: 86516596)
$255.30

Ford Engine Oil Pump
- For model 8100 with 380 engine. (Part No: 86100762)
$120.38

Ford Engine Oil Pump
- Fits 555E, 5610S, 5640, 575E, 655, 6610S, 6640, 66400, 675E, 6810S, 7010, 7610S, 7740, 7740O, 9030E, LB110, LB115, LB90, LS190, LX985, TB100, TB110, TS100, TS90. (Part No: 81868537)
$109.74

Ford Oil Pan
- Fits 3 cylinder tractors 1965 and newer: 2000, 3000, 4000, 2600, 3600, 3900, 4100, 4600, 2310, 2610, 281, 2910, 3610, 3910, 4110, 4610, 3230, 3430, 3930, 4130, 4630. Industrial 230, 231, 233, 234, 2110LCG, 333, 334, 335, 3400, 3500, 3550, 420, 4110LCG, 445, 445A, 4400, 4500, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B. Cast iron construction. Does not include gasket and plug. (Part No: C9NN6675A)
$285.52

Ford Oil Pan Gasket
- Fits 134 gas and 172 gas and diesel engines in: NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. (Part No: EAF6710B)
$3.96

Ford Oil Pan Gasket
- For the following 3 Cylinder Gas or Diesel Engines: 158, 175, 192, 201 CID, used in tractors 1965 and newer: 2000, 2600, 3000, 3600, 3610, 3910, 4000, 4600, 4610. (Part No: F0NN6710AA)
$6.89

Ford Distributor Coil Bail
- For tractor models 8N, 9N, 2N with Front Mount Distributor. (Part No: 9N12137)
$2.10

Ford Gasket, Oil Pan Drain Plug
- Fits Ford Tractors 1939 to 1964, Models: NAA, NAB, Jubilee, 2N, 8N, 9N, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000, 4000. This gasket measures 2.632 inches inside diameter, 3.085 inches outside diameter, .250 inches wide and it is .059 inches thick. Replaces 8N6734. (Part No: 8N6734)
$.81

Ford Coil, High Performance (Black), 6 Volt, Oil Filled
- Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. (Not for 9N, 2N early 8N using front mount distributors) (Part No: 40011)
$35.18

Ford Coil, High Performance (Black), 12 Volt, Oil Filled
- Pertronix Flame Thrower heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40511)
$35.82

Ford Oil Seal, Secondary Output Shaft
- For tractor models 2000, 2600, 3000, 3600, 4000 all with 6 Speed Transmission, Dexta, Super Dexta. (Part No: E42GA9)
$6.05

Ford Axle Oil Seal Gasket, Inner
- For 8N 1948-1950. Used between A8NN4251A Seal & Retainer in Oil seal assembly. Price is for each. (Part No: 8N4290)
$.56

Ford Seal, Oil Filter Adapter
- 2 quart to 1 quart spin on or use 309825. For tractor models 2000, 3000, 4000, (5000 1965-10\1969). (Part No: D8NN6N818AA)
$3.11

Ford Oil Pump Bushing
- Fits 8N, 9N, 2N. (Part No: 9N6612A)
$5.31

Ford Oil Pump Cover Gasket
- For 8N, 9N, 2N. Replaces 9N6619 (Part No: 9N6619)
$.53

Ford Dipstick, Engine Oil
- Length is approximately 10 inches overall length and 6 1\2 inches from the base of cap to end. For tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3120, 3190, 3300, 3400, 3500, 3550, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4500, 5000, 5100, 5190, 5200, 5340, 5500, 650, 6500, 7000, 7100, 7200, 750, 7500, 755, 755A, 755B. (Part No: C5NE6750D)
$6.75

Ford Oil Pressure Gauge Kit, Universal
- Universal Complete assembly with oil tube and mounting hardware. 80 psi. Line uses 1\4 inch connection with adapters for 3\8 and 1\2 inch. (Part No: SSW0002)
$8.62

Ford Rear Axle Oil Seal
- For tractor models Dexta, Super Dexta. (Part No: 81717238)
$9.82

Ford Oil Seal, Front
- 60mm x 89mm x 12mm. For tractor models Major, Power Major, Super Major. All with 220CID engine. (Part No: 510E6362)
$10.65

Ford Oil Filter Mounting Gasket
- This gasket fits behind the Mounting Plate that the filter screws on to. For Spin On Type Oil Filters only. For tractor models 1801, 1811, 1820, 1841, 1871, 1881, 2000, 2030, 2110, 2111, 2120, 2130, 2121, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB. (Part No: EAA6838A)
$1.10

Ford Oil Filter Mounting Gasket
- This gasket fits behind the Mounting Plate that the filter screws on to. For Spin On Type Oil Filters only. For tractor models 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB. (Part No: EAA6838A)
$1.10

Ford Air Cleaner Oil Cup
- 4-3\8 inch inside diameter, 4-3\4 inch outside diameter, 3 inch tall. For tractor models 1801, 1811, 1821, 1841, 1871, 1887, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 601, 701, 801, 901. (Part No: 311510)
$31.43

Ford Air Cleaner Oil Cup, Inner
- For tractor models 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 601, 701, 801, 901. (Part No: 311506)
$8.25

Ford Oil Pump
- For tractor models 2110, CL45, CL55, CL65. (Part No: SBA140016090)
$153.46

Ford Oil Pressure Gauge, 80 pound
- For the following tractors (before 1965): 600, 601, 700, 701, 800, 801, 2000, 4000, NAA. Oil pressure gauge, 80 pound, 2 inch body diameter. (Part No: FAD9273A)
$10.86

Ford Oil Pump, Hex Drive
- For 134 CID 4-cylinder GAS engine in: 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, (2000, 1962-64) Oil pump assembly, hex drive, cast iron rotor type. (M67B) Uses repair kit CPN6600A. (Part No: C3NN6621A)
$93.11

Ford Radiator for Tractor with Oil Cooler
- Core size (the finned part) is: 18.000 inches wide, 17.750 inches high, 4 Rows of tubes with 8 fins per inch. Fits Industrials: 455 (7\87-11\88), 550 (8\81>), 555 (8\81>), 555A (8\81>), 555B (8\81>), 655 (8\81>), 655A (8\81>). Replaces E0NN8005FA15L, F2NN8005FA15L, 83925458. (Part No: E0NN8005FA15L)
$403.23

Ford Radiator with Oil Cooler-Rear Fittings
- Oil cooler fittings are on the back-side of radiator. Replaces 83925458. Core size (the finned part) is: 18.000 inches wide, 17.750 inches high, 4 rows of tubes, 8 fins per inch. Fits industrials: 455 (7\87-11\88), 550 (8\81>), 555 (8\81>), 555A (8\81>), 555B (8\81>), 655 (8\81>), 655A (8\81>). (Part No: D8NN8005BB)
$354.06

Ford Oil Terminal Block
- For tractor models 9N, 2N from 1939-1947. (Part No: 9N6722)
$10.43

Ford Distributor Cap with Pertronix Coil Modification
- Pertronix Distributor Cap for 8N, 9N, 2N with Front Mount Distributor THAT HAS BEEN CONVERTED TO AUTOMOTIVE STYLE KIT WITH A PERTRONIX 1247XT KIT. (Part No: 1247XTCAP)
$27.24

No
Picture
Ford Oil Filter
- 2.950 inch outside diameter. For tractor models (1000, 1600 with 2 cylinder engine), 1100, 1200, 1300, 1500, 1700, 1710, 1900, 1910. (Part No: E1NN6714BB)
$6.78

Ford Coil, High Performance (Black), 6 Volt, Epoxy Filled
- Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40111)
$44.33

Ford Coil, High Performance (Black), 12 Volt, Epoxy Filled
- Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40611)
$45.15

Ford Coil, Ultra High Performance (Chrome), Oil Filled
- Pertronix Flame Thrower II Chrome, ultra high performance coil is for 12-volt systems using Ignitor II electronic conversion kits or any 6 volt system using Ignitor II . Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45001)
$43.58

Ford Coil, Ultra High Performance (Black), Oil Filled
- Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems using Ignitor II electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45011)
$39.44

Ford Gauge Cluster, Temerature, Oil, Generator
- For tractor models Power Major, Super Major 8-1958 and up. (Part No: E1ADDN10849)
$86.10

Ford Oil Filter Adapter Kit, Spin On
- Converts tractor from element style filter to spin on oil filter. Comes with one filter. For tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 all from 1953 to 1964 with 4 cylinder gas engine. Can use replacement spin-on filter E7NN6714AA. (Part No: CPN6882A)
$31.35

Ford Oil Filler Breather Element
- Fits caps 310030 and 8N6766B. For tractor models 8N, 9N, 2N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2030, 2031, 2111, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140. (Part No: 8N6782A)
$3.65

Ford Lucas Heavy Duty Oil Stabilizer (quart)
- A pure petroleum multi-use oil supplement. Controls noise, heat and wear in manual transmissions and differentials. Number one in the heavy duty and high performance industries. Lucas Oil Stabilizer is a 100% petroleum product formulated to eliminate dry starts and reduce friction, heat and wear in any type of engine. It allows motor oils a higher degree of lubricity which reduces oil consumption and operating temperatures. Use Lucas Oil Stabilizer in gear oil to stop leaks, reduce operating temperatures and increase the life of the gear oil. Since it is pure petroleum. Key Features Increase oil life at least 50% longer, Reduces oil consumption, Eliminates dry starts, Raises oil pressure, and Increases power and miles per gallon. (Part No: LU10001)
$15.12

Ford Lucas Hub Oil (quart)
- Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Part No: LU10088)
$10.13

Ford Governor Shaft Oil Seal
- Governor Shaft Oil Seal, for 134 and 172 CID gas engines. Tractors: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1953 to 1964). (Part No: EAF18183B)
$13.07

Ford Oil FIlter, Spin On
- For tractor models 2000, 2100, 2300. (Part No: 18A303)
$7.46

Ford Oil Seal, Rear Axle, Inner
- This is an inner oil seal for the rear axle. For tractor models Dexta, Super Dexta. Measures 2 inches x 2 7\8 inches x 0.468 inch. Replaces 957E4233B. (Part No: 195555M1)
$5.69

Ford Oil Seal, Rear Axle, Outer
- This is an outer oil seal for the rear axle. For tractor models Dexta, Super Dexta. (Part No: 957E4250A)
$6.44

Ford Oil Pressure Gauge, 50lb Black
- For tractor models 8N, 9N, 2N. Oil Pressure Gauge, 0-50 lbs., for 2 inch diameter hole. (Part No: 9N9273A-BLACK)
$10.31

Ford Oil Pressure Switch
- For tractor models (Dexta, Super Dexta from 1957 to 12\1958). (Part No: 100E9278)
$12.38

Ford Oil Pressure Switch
- For tractor models (Dexta, Super Dexta from 12\1958 to 1964), Major, Power Major, Super Major. (Part No: E1ADDN9278)
$15.57

Ford Transmission Oil Cooler
- For tractor models (231, 233, 333, 335, 531, 532, 2600, 3600, 4600 less cab), (7000 6\1973 and up). (Part No: D3NNH860A)
$271.25

Ford Transmission Oil Cooler
- For tractor models (233, 333, 335, 532, 2600, 3600 all with cab), 230A, 234, 334, 530A, 2310, 2610, 2810, 2910, 3610, 3910, 3930, 4110, 4130, 4610, 4630, 4830, 5030, 5600, 6600, 7600. (Part No: D4NNH860A)
$86.63

Ford Oil Pressure Switch
- For tractor models 3830, 4030, 4230, 4330, 5530, 6530, 4835, 5635, 6635, TL70, TL80, TL90, TL100. Replaces 5160694. (Part No: 4998770)
$11.40

Ford Oil Pressure Switch
- For tractor models 2000, 3000, 4000, 5000, 7000, 8000, 8600, 8700, 9000, 9600, 9700, 2600, 3600, 3900, 4100, 4600, 5600, 5900, 6600, 6700, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 5610S, 6610, 6610S, 6710, 6810, 7610, 7610S, 7710, 7810, 7810S, 7910, 8010, 8210, 3230, 3430, 3930, 4130, 4630, 4830. Replaces 81873524, F1NN9278AA, D8NN9278AA. (Part No: D8NN9278BD)
$3.15

Ford Oil Pressure Switch
- For tractor models 5030, 8530, 8630, 8730, 8830, 5640, 6640, 7740, 7840, 8240, 8340, 230A, 231, 233, 234, 250C, 260C, 2110LCG, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 3400, 3500, 4110LCG, 4400, 4500, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555E, 655, 655A, 655C, 655D. Replaces 81873524, F1NN9278AA, D8NN9278AA. (Part No: D8NN9278BD)
$3.15

Ford Oil Pressure Switch
- For tractor models 655E, 755, TW5, TW10, TW15, TW20, TW25, TW30, TS90, TS100, TS110. Replaces 81873524, F1NN9278AA, D8NN9278AA. D8NN9278BA, 500630, C8NF9278B, D1NN9278B, D8NN9278BA, D8NN9278BC, D8NN9278BD, D8NN9278D, F0NN9278AA, F1NN9278AA Note: connection point could vary. (Part No: D8NN9278BD)
$3.15

Ford Oil Filter
- Filter Element and Gasket for tractors: 8N, 9N, 2N (1939-1952), 340. For Balers: 166, 271, 272, 273, 283, 286. (Part No: APN6731B)
$6.39

Ford Oil Relief Valve Inlet Gasket
- For tractor models 8N, 9N, 2N. (Part No: 1GA6669)
$0.49

Ford Oil Pump, Hex Drive
- Gear Type For applications with hex drive shafts (Shaft not included). For 134\172 CID Gas engine in: Models: 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Part No: EAE6621AB)
$74.52

Ford Oil Pump Relief Plunger Spring
- Oil Pump Relief Plunger Spring. For tractor models 8N, 9N, 2N (1939 to 1952). (Part No: 9N6654)
$0.95

No
Picture
Ford Oil Filter, spin on
- Used with spin on oil filter adapter kit number S.40533 Replaces 1447082M1, 1447082M2, 1447082M91, 1447082V1, 1639339M92, 2418F475, 2654408, M03-35-02, 02\130142, 106435AS, 2301217, 2654156, 66458555, 71014120, 740104AS, 740104ASV, AKU1033, PH2895, PH4408. (Part No: 1447082M1)
$5.99

No
Picture
Ford Hydraulic Pump Shaft Oil Seal
- For piston type pump. Measures inside diameter 0.9350 inch, outside diameter 2.004 inch, width 0.5315 inch. For tractor models: NAA, 600, 601, 700, 701, 800, 801, 900, 901. (Part No: NCA851A)
$5.35

Ford Oil Pressure Gauge, 80 Pound, Black
- For tractor models 8N, 9N, 2N, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 4 cylinder), NAA, Jubilee, 1801. Black raised bezel, measures to 80 pound, dash or bracket mounted gauge with a bracket and studs 1\8 inch NPT thread. Replaces FAD9273A. (Part No: FAD9273A_Black)
$10.41

Ford Oil Gauge Copper Line Kit
- Universal, for tractors using 1\8 inch x 6 foot copper oil line. Includes 6 foot 1\8 inch line, 2 inch x 5\16 inch-24 UNF nuts, 2 compression sleeves, and a 1\8 inch-27 NPTF female to 5\16 inch-24 UNF male adapter. (Part No: UNI523)
$25.20

Ford Oil Line Adapter
- Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1\8 inch pipe thread to 1\8 inch tube. Brass. (Part No: 919095)
$13.27

Ford Oil Line Adapter
- Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1\8 inch pipe thread to 1\4 inch tube. Brass. (Part No: IHS626)
$12.72

Ford Oil Gauge
- 100 lb. gauge with black face and black bezel like original. For Fordson Major, Power Major, Super Major. (Part No: E1ADDN9273)
$24.33

Ford Oil Dipstick
- 7 7\8 inches long for models: 2600, 3600, 3900, 4100, 4600, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 230, 231, 233, 234, 260, 333, 334, 335, 420, 445, 515, 530, 531, 532, 535, 540, 540, 545, 550, 555 Replaces: 87801534, C7NN6750C, C9NN6750A, D3NN6750C, D3NN6750D, D3NN6750E, D4NN6750B, D4NN6750D, D6NN6750B, E9NN6750BA, 81816867, 81822073, 81837146, 81837147, 81843818, 83902286, 83905287, 83918846, 83982499 (Part No: E9NN6750BA)
$8.39

Ford Oil Pan Drain Plug
- White Zinc finish, 7\8 inch - 18 UNF. Fits multiple models: 2000, 2100, 2110, 2120, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4500, 5000, 5100, 5190, 5200 thru 1969. Order EBU6734A washer if needed. (Part No: C5NE6730B)
$8.25

Ford Oil Pan Drain Plug
- This 3\4 inch Oil Pan Drain Plug is for Ford tractor models: 230A, 231, 233, 234, 333, 334, 335, 420, 445, 445A, 450, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D, 755, 755A, 755B, 2000, 2600, 2910, 3000, 3230, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4110LCG, 4130, 4400, 4500, 4610, 4630, 4830, 5000, 5030, 5500, 5550, 5600, 5610, 5900, 6500, 6600, 6610, 6700, 6710, 7000, 7500, 7600, 7610, 7700, 7710, 7810, 7810S, 7840, 7910, 8000, 8010, 8160, 8210, 8240, 8260, 8340, 8360, 8530, 8560, 8600, 8630, 8670, 8700, 8730, 8770, 8830, 8970, 9000 1970 and up. Uses C9NN6734A washer, not included. Replaces C9NN6730B. (Part No: C9NN6730B)
$1.76

Ford Transmission Oil Dipstick
- Also replaces E1NN7A020BA, D3NN7A020B and 81842758. For models: 340A, 340B, 345C, 345D, 515, 535, 540, 545, 230A, 231, 2310, 233, 234, 250C, 260C, 2600, 2610, 2810, 2910, 3230, 333, 334, 335, 340, 3430, 3600, 3610, 3900, 3910, 3930, 4100, 4110, 4130, 445A, 4600, 4610, 4630, 4830, 5030, 530A, 531, 532. (Part No: 83929967)
$6.19

Ford Oil Filler Plug
- For transmission and rear end. For tractor models 2000 3 cylinder, 231, 233, 234, 2600V, 333, 335, 340, 420, 445, 515, 531, 532, 535, 540, 545, 550, 555, 2100, 2110, 2120, 2150, 2300, 2600, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 3900, 4000 3 cylinder, 4100, 4110, 4140, 4190, 4200, 4300, 4340, 4400, 4410, 4500, 4600, Dexta, Power Major, Super Dexta, Super Major. Please verify the thread size before ordering. This plug measures 1-5\8 inch x 12 thread. Does not come with gasket. Use NAA9160A for gasket. (Part No: 957E7010)
$7.56

Ford Oil Pressure Switch
- Note the difference - D8NN9278BD has a different connection type. For tractor models 2000, 2300, 3000, 333, 334, 335, 340, 3400, 3500, 3600. The thread size is 1\4 NPT. Replaces 81873524, 82028130, D8NN9278BB, F1NN9278AA. (Part No: D8NN9278BB)
$4.79

Ford Engine Oil Filter Conversion Kit
- Converts Element\Canister style filter to Spin On type. Use filter E7NN6714BA (not included). Fits 8400, TW10, TW20, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700. Replaces DKPN6882A, E9NN6884AA, D8NN6N818AA, 87097S95, D8NN6890BA, 83916925, 83914060, 83981595. (Part No: DKPN6882A)
$114.61

Ford Oil Filter, Spin on
- Used with DKPN6882A adapter. Fits models 8400, TW10, TW20, 8000, 8200, 8600, 8700, 9000, 9200, 9600 and 9700 (Part No: E7NN6714BA)
$22.77

Ford Hydraulic Lift Oil Level Dipstick
- Fits Ford 4 Cylinder tractor models: (1954 to 1964) 1801, 2000, 4000, 600, 601, 700, 701, 800, 801, 900 and 901. Replaces NCA927B. (Part No: NCA927B)
$17.25

Ford Hydraulic Lift Oil Level Dipstick
- Fits Ford 4 Cylinder tractor models (1954-1964) 941, 950, 951, 960, 961, 971 and 981. Replaces NCA927B. (Part No: NCA927B)
$17.25

Ford Oil Pressure Switch
- Fits 1000, 1100, 1110, 1200, 1210, 1300, 1310, 1500, 1510, 1600, 1700, 1710, 1900, 1910, 2110. Replaces OEM SBA185246010, SBA185246011, SBA18524605, SBA185246050 (Part No: SBA185246010)
$9.96

Ford Oil Seal, PTO Input Shaft
- This PTO Input Shaft Oil Seal measures 1.125 inch inside diameter, 1.565 inch outside diameter, 0.250 inch wide. For models 5000, 5600, 5610, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8600, 8700, 9000, 9600, 9700. All for tractors with a 7 or 8 speed transmission. Replaces 81801990, C5NN2N258A, C5NN2N258C, C5NN799A, C5NNE2A258B. (Part No: 195501M1)
$3.75

No
Picture
Ford Air Cleaner Oil Cup
- This cup is for Clamp Type Air Cleaners. This cup measures 4 3\4 inches outside diameter at the lip. The height is 3 inches. Please measure before ordering to ensure the proper fit. For models 2N, 9N, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. Replaces: 311507. (Part No: 311507)
$14.93

Ford Gasket, Oil Pan Drain Plug
- Fits Ford Tractors 1939 to 1964, Models: NAA, NAB, Jubilee, 2N, 8N, 9N, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000, 4000. This gasket measures 2.632 inches inside diameter, 3.085 inches outside diameter, .250 inches wide and it is .059 inches thick. Replaces 8N6734. (Part No: 8N6734)
$.81

No
Picture
Ford Coil
- This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1\2 inches diameter. (Part No: 28010)
$28.38

Ford Oil Pan Drain Plug Washer
- This washer is used with C5NE6730B 7\8 inch Oil Drain Plug. Fits models: 2000, 2100, 2110, 2120, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4500, 5000, 5100, 5190, 5200. (Part No: EBU6734A)
$1.25

Ford Oil Pan Drain Plug Washer
- This washer is used with C9NN6730B 3\4 inch Oil Pan Drain Plug. Fits models: 230A, 231, 233, 234, 333, 334, 335, 420, 445, 445A, 450, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D, 755A, 755B, 2000, 2110LCG, 2600, 2810, 2910, 3000, 3230, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4110LCG, 4130, 4400, 4500, 4610, 4630, 4830, 5000, 5030, 5500, 5550, 5600, 5610, 5900, 6500, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 7810S, 7840, 7910, 8000, 8010, 8160, 8210, 8240, 8260, 8340, 8360, 8530, 8560, 8600, 8630, 8670, 8700, 8730, 8770, 8830, 8970, 9000. (Part No: C9NN6734A)
$.80

Ford Oil Pan Drain Plug
- This 3\4 inch Oil Pan Drain Plug is for Ford tractor models: 230A, 231, 233, 234, 333, 334, 335, 420, 445, 445A, 450, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D, 755, 755A, 755B, 2000, 2600, 2910, 3000, 3230, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4110LCG, 4130, 4400, 4500, 4610, 4630, 4830, 5000, 5030, 5500, 5550, 5600, 5610, 5900, 6500, 6600, 6610, 6700, 6710, 7000, 7500, 7600, 7610, 7700, 7710, 7810, 7810S, ``7840, 7910, 8000, 8010, 8160, 8210, 8240, 8260, 8340, 8360, 8530, 8560, 8600, 8630, 8670, 8700, 8730, 8770, 8830, 8970, 9000 1970 and up. Uses C9NN6734A washer, not included. Replaces C9NN6730B. (Part No: C9NN6730B)
$1.76

Ford Oil Pan Drain Plug Washer
- This washer is used with C9NN6730B 3\4 inch Oil Pan Drain Plug. Fits models: 230A, 231, 233, 234, 333, 334, 335, 420, 445, 445A, 450, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D, 755A, 755B, 2000, 2110LCG, 2600, 2810, 2910, 3000, 3230, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4110LCG, 4130, 4400, 4500, 4610, 4630, 4830, 5000, 5030, 5500, 5550, 5600, 5610, 5900, 6500, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 7810S, 7840, 7910, 8000, 8010, 8160, 8210, 8240, 8260, 8340, 8360, 8530, 8560, 8600, 8630, 8670, 8700, 8730, 8770, 8830, 8970, 9000. (Part No: C9NN6734A)
$.74

Ford Oil Filter To Governor Line
- This is a pre-bent, steel oil filter outlet To governor line used on Ford 8N 1950 to 1952. It replaces 8N18666. (Part No: 8N18666)
$22.50

Ford Oil Filter Outlet to Governor Line
- This Oil Filter Outlet to governor line is used in Potmetal Governors in Ford 2N and 8N Tractors, 1942 to 1950. Replaces original part number 2N18666. (Part No: 2N18666)
$22.50

Ford Oil Filter Outlet To Block Line
- This Oil Filter Outlet to block line is used on Ford 9N and 2N Tractors, 1939 to 1947 with Cast Iron Governor. Replaces 9N18666. (Part No: 9N18666)
$9.95

Ford Oil Filter Inlet To Junction Block Line
- This oil filter inlet to junction block is used on 8N Tractors with Side Mount Distributors (above serial number 263843). It replaces original part number 8N18667B. (Part No: 8N18667B)
$13.95

No
Picture
Ford Oil Filter Inlet To Junction Block Line
- This pre-formed steel oil filter inlet to junction block line is used on Ford 8N tractors with Front Mount Distributors (before serial number 263843). Replaces original part number 8N18667A. (Part No: 8N18667A)
$13.95

Ford Oil Filter To Junction Block Line
- This Oil Filter to junction block line is pre-bent steel. It is used in Ford 9N and 2N, 1939 to 1947. It replaces original part number 9N18667. (Part No: 9N18667)
$13.95

Ford Oil Line, Junction Block to Oil Pressure Gauge
- This oil line is used from Junction Block to Oil Pressure Gauge on 8N tractors, 1948-1952. It replaces original part number 8N18676B (Part No: 8N18676B)
$11.95

Ford Oil Line, Junction Block to Gauge
- This is a pre-formed steel Junction Block to Oil Pressure Gauge line. It is used on Ford 9N and 2N tractors, 1939 to 1947. It replaces original part number 9N18676. (Part No: 9N18676)
$11.95


Click here to see parts by model







PayPal


Customer Service
Monday - Friday
9:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure


  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2015 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.