FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford Tractor Lift Arm

Click here to see parts by model

Ford Lower Lift Arm, RH - This category I lift arm is Right hand. 31.625 inch hole centers. For 600, 620, 630, 640, 650, 660, 800, 820, 840, 850 (1955-64); 2000, 2600, 3000, 3600 (1965-81). Replaces D0NN555D (Item #: 111313, Ref. D0NN555DRH) $58.00

Ford Lower Lift Arm, LH - Left hand Category I lift arm has 32.5 inch hole centers. For 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, (1955-1964); 2000, 2600, 3000, 3600 (1965-1981), 4000. Replaces D0NN555C (Item #: 111312, Ref. D0NN555CLH) $51.00

No
Picture
Ford Lower Lift Arm - This lower lift arm comes with category 1 ball ends. For Dexta. Right or left. THESE LIFT ARMS ARE 33 InchES CENTER TO CENTER OF BALLS, CHECK DIMENSIONS OF OLD ARMS BEFORE ORDERING, MAY NEED TO BE ORDERED IN SETS! (Item #: 170284, Ref. 957E555) $76.00

$photo of Catagory 1 lower lift are will replace the Left or Right. Uses 7\8 pin. For 8N, 9N, 2N, NAA, Jubilee. Lower 3-Point lift Arm. Center to Center measurement 32 inches. One half inch width. Color may vary.$
Ford Lift Arm, Lower - Catagory 1 lower lift are will replace the Left or Right. Uses 7\8 pin. For 8N, 9N, 2N, NAA, Jubilee. Lower 3-Point lift Arm. Center to Center measurement 32 inches. One half inch width. Color may vary. (Item #: 103208, Ref. 9N555B) $52.00

$photo of Right or left hand, 5\8 inches thick x 2-1\2 inches wide, 24.75 inch center to center. For tractor models (1110, 1210 from 1\1983 and up), ( (1200 from 1\1979 and up).$
Ford Lift Arm - Right or left hand, 5\8 inches thick x 2-1\2 inches wide, 24.75 inch center to center. For tractor models (1110, 1210 from 1\1983 and up), ( (1200 from 1\1979 and up). (Item #: 172883, Ref. SBA370100160) $136.00

Ford Lower Lift Arm, Cat II - Left or right hand, 34.646 inch center hole to center hole, 3.504 inch wide, .709 inch thick, Rigid Forged Type Ends. For tractor models 250C, 260C, 2810, 2910, 3000, 3055, 3230, 3430, 345D, 3550, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4200, 4330, 4340, 4400, 4410, 445D, 4500, 4600, 4610, 4630, 4830, 5030, 515, 532, 535, 545D. Color varies. Replaces 82002004, C5NN555AL, C7NN555S. (Item #: 122629, Ref. 81821330) $130.00

$photo of Lower Lift Arm, heavy-duty, with forged ball-joint ends. Category I accommodates 7\8 inch drawbar or lower link pins. Length 32 inches. For tractor models 8N, 9N, 2N, Golden Jubilee and NAA. Used left or right side.$
Ford Lift Arm - 32 Inch - Cat 1 - Lower Lift Arm, heavy-duty, with forged ball-joint ends. Category I accommodates 7\8 inch drawbar or lower link pins. Length 32 inches. For tractor models 8N, 9N, 2N, Golden Jubilee and NAA. Used left or right side. (Item #: 191125, Ref. JSA1002B) $51.00

Ford Hydraulic Lift Arm, Right Hand - This is the Right Hand Hydraulic Lift Arm used on Ford 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 2910, 3000, 333, 334, 335, 3400, 3500, 3600, 3610, 3910, 4110, 530A, 531. Replaces 81802150, C5NNB920D (Item #: 154976, Ref. C5NNB920D) $51.00

Ford Hydraulic Lift Arm, Left Hand - This is the Left Hand Hydraulic Lift Arm used on Ford 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 2910, 3000, 333, 334, 335, 3400, 3500, 3600, 3610, 3910, 4110, 530A, 531. Replaces 81802158, C5NNB921D (Item #: 154979, Ref. C5NNB921D) $58.58

Ford Hydraulic Lift Arm, Right Hand - This Right Hand Hydraulic Lift Arm is used on FORD 3900, 4100, 4600, 2810, 2910, 3610, 3910, 4610, 3230, 3430, 3930, 4630, 4830, 5030, 250C, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 515, 532, 535, 540, 540B, 545, 545A, 545B, 545C, 545D. It Replaces D3NNB920A. (Item #: 178945, Ref. D3NNB920A) $179.94

No
Picture
Ford Hydraulic Lift Arm, Left Hand - This Left Hand Hydraulic Lift Arm is used on FORD 3900, 4100, 4600, 2810, 2910, 3610, 3910, 4610, 3230, 3430, 3930, 4630, 4830, 5030, 250C, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 515, 532, 535, 540, 540B, 545, 545A, 545B, 545C, 545D. It Replaces D3NNB921A. (Item #: 131822, Ref. D3NNB921A) $187.00

$photo of This Bushing is for using Category I Implements with Category II Lower Lift Arms. It has a 7\8 Inside Diameter, and 1-1\8 Outside Diameter and is 1-3\4 Inches long. Replaces B500192, 87299215, 87760407, EC0NG992AA, 150-821, BUSH04, 22BCO006, 477RB, BO821, 2430351, B821, B2008, 351, 00351, C7NNG992A, 81819374$
Ford Lift Arm Bushing - This Bushing is for using Category I Implements with Category II Lower Lift Arms. It has a 7\8 Inside Diameter, and 1-1\8 Outside Diameter and is 1-3\4 Inches long. Replaces B500192, 87299215, 87760407, EC0NG992AA, 150-821, BUSH04, 22BCO006, 477RB, BO821, 2430351, B821, B2008, 351, 00351, C7NNG992A, 81819374 (Item #: 108626, Ref. BUSH04) $2.60

$photo of This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 490mm (19 15\16 inches), Thickness: 16mm (5\8 inches), Width: 65mm (2 9\16 inches). Verify that the measurements will meet the requirements of your application.$
Ford Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 490mm (19 15\16 inches), Thickness: 16mm (5\8 inches), Width: 65mm (2 9\16 inches). Verify that the measurements will meet the requirements of your application. (Item #: 185049, Ref. 159332) $45.10

$photo of This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 21.5 Inches Center to Center (A), Thickness: 5\8 inches, Width 2 9\16 inches, 7 1\4 Inches from center of ball joint for first hole (B), 9 1\4 inches from center of ball to second hole (C). Verify that the measurements will meet the requirements of your application.$
Ford Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 21.5 Inches Center to Center (A), Thickness: 5\8 inches, Width 2 9\16 inches, 7 1\4 Inches from center of ball joint for first hole (B), 9 1\4 inches from center of ball to second hole (C). Verify that the measurements will meet the requirements of your application. (Item #: 103203, Ref. 159324) $41.10

$photo of This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 595mm (23-7\16 inches), Thickness: 16mm (5\8 inches), Width: 65mm (2 9\16 inches), Three holes located 13-3\4 inches, 12 inches and 8-1\2 inches from center of ball. Verify that the measurements will meet the requirements of your application.$
Ford Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 595mm (23-7\16 inches), Thickness: 16mm (5\8 inches), Width: 65mm (2 9\16 inches), Three holes located 13-3\4 inches, 12 inches and 8-1\2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 185732, Ref. 159326) $61.00

$photo of This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 645mm (25 13\32 inches), Thickness: 16mm (5\8 inches), Width: 65mm (2 9\16 inches), Three holes located 14-3\4 inches, 13 inches and 8-1\2 inches from center of ball. Verify that the measurements will meet the requirements of your application.$
Ford Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 645mm (25 13\32 inches), Thickness: 16mm (5\8 inches), Width: 65mm (2 9\16 inches), Three holes located 14-3\4 inches, 13 inches and 8-1\2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 184428, Ref. 159328) $55.00

$photo of This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 700mm (27 9\16 inches), Thickness: 16mm (5\8 inches), Width: 65mm (2 9\16 inches), Three holes located 16-1\4 inches, 13 inches and 6-1\4 inches from center of ball. Verify that the measurements will meet the requirements of your application.$
Ford Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 700mm (27 9\16 inches), Thickness: 16mm (5\8 inches), Width: 65mm (2 9\16 inches), Three holes located 16-1\4 inches, 13 inches and 6-1\4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 103206, Ref. 159330) $64.00

$photo of This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 750mm (29 1\2 inches), Thickness: 16mm (5\8 inches), Width: 65mm (2 9\16 inches), One hole located 6 1\4 inches from center of ball. Verify that the measurements will meet the requirements of your application.$
Ford Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 750mm (29 1\2 inches), Thickness: 16mm (5\8 inches), Width: 65mm (2 9\16 inches), One hole located 6 1\4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 103207, Ref. 159322) $60.00

$photo of This Lower Lift Arm is used on Ford 1720 and 1920 tractors produced between 01-JAN-1987 and 30-SEP-1989. 1720 below serial number UL27965. 1920 below serial number UP26442. It measures 3\4 inches by 2 1\2 inches and 31.81 inches Center to Center. It is used both left and right side. Replaces SBA370101190$
Ford Lower Lift Arm, RH or LH - This Lower Lift Arm is used on Ford 1720 and 1920 tractors produced between 01-JAN-1987 and 30-SEP-1989. 1720 below serial number UL27965. 1920 below serial number UP26442. It measures 3\4 inches by 2 1\2 inches and 31.81 inches Center to Center. It is used both left and right side. Replaces SBA370101190 (Item #: 172992, Ref. SBA370101190) $119.00

$photo of his Lower Lift Arm is used on Ford 1720 and 1920 tractors produced After 1 - OCT - 1989. 1720 above serial number UL27965. 1920 above serial number UP26442. It measures 3\4 inches by 2 1\2 inches and 31.81 inches Center to Center. It is used both left and right side. Replaces$
Ford Lower Lift Arm, RH or LH - his Lower Lift Arm is used on Ford 1720 and 1920 tractors produced After 1 - OCT - 1989. 1720 above serial number UL27965. 1920 above serial number UP26442. It measures 3\4 inches by 2 1\2 inches and 31.81 inches Center to Center. It is used both left and right side. Replaces (Item #: 172807, Ref. SBA370101302) $134.00

$photo of Used on Category I lower lift arms, where the arm attaches to the axle housing, this nut is 5\8 UNF thread. Verify size before ordering. Many models have different size nuts. Replaces OEM numbers 83904384, 86637930, 87446, 33987S, 33987S36, 81419279, 701647, 353927X1, 170917423, 70917423, 6217938M1$
Ford Lower Lift Arm Pin Nut - Used on Category I lower lift arms, where the arm attaches to the axle housing, this nut is 5\8 UNF thread. Verify size before ordering. Many models have different size nuts. Replaces OEM numbers 83904384, 86637930, 87446, 33987S, 33987S36, 81419279, 701647, 353927X1, 170917423, 70917423, 6217938M1 (Item #: 178033, Ref. 353927X1) $1.70

$photo of Measuring 3\4 inch by 3 inches and 31.81 inches Center to Center, this part replaces Ford \ New Holland part number SBA370101153. Used on Shibaura built 2120 and 3415 tractors.$
Ford Lower Lift Arm, RH or LH - Measuring 3\4 inch by 3 inches and 31.81 inches Center to Center, this part replaces Ford \ New Holland part number SBA370101153. Used on Shibaura built 2120 and 3415 tractors. (Item #: 172844, Ref. SBA370101153) $214.00

$photo of This lower pull arm is catagory II and can be use on the right or left side. It measures 36 5\8 inches from center of hole to center of hole, 3 15\16 wide and 9\16 inches thick. Replaces D2NN555D, EE8TZ555AA, F0NN555AA, 82023435, 82002013, 81826806. Typically found on models 5000, 5110, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7410, 7610, 7700, 7710, 7740$
Ford Lower Lift Arm - This lower pull arm is catagory II and can be use on the right or left side. It measures 36 5\8 inches from center of hole to center of hole, 3 15\16 wide and 9\16 inches thick. Replaces D2NN555D, EE8TZ555AA, F0NN555AA, 82023435, 82002013, 81826806. Typically found on models 5000, 5110, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7410, 7610, 7700, 7710, 7740 (Item #: 153318, Ref. D2NN555D) $143.00

$photo of Lower Link Lift Arm R\H (Cat 1\1) measures 32 7\8 inches in length, 3 9\16 in width, and 5\8 in thickness. Applicable for 20 0-4000 (4 cyl) 2000, 2100, 2110, 2120, 2150, 230, 231, 2310, 233, 2600, 2600N, 2600V, 2610, 2810, 2910, 3000, 3100, 3120, 3310, 333, 3330, 334, 335, 3400, 3500, 3600, 3600N, 3600V, 3610, 3610N, 3910, 3910N, 4000, 4110, 4110N, 4140, 4600, 4610, 4610N, 530, 531, 600, 601, 700, 701, 800, 801, 900, 901. Replaces 81815827 and E5NN555AA11Z.$
Ford Lower Lift Arm R\H (Cat 1\1) - Lower Link Lift Arm R\H (Cat 1\1) measures 32 7\8 inches in length, 3 9\16 in width, and 5\8 in thickness. Applicable for 20 0-4000 (4 cyl) 2000, 2100, 2110, 2120, 2150, 230, 231, 2310, 233, 2600, 2600N, 2600V, 2610, 2810, 2910, 3000, 3100, 3120, 3310, 333, 3330, 334, 335, 3400, 3500, 3600, 3600N, 3600V, 3610, 3610N, 3910, 3910N, 4000, 4110, 4110N, 4140, 4600, 4610, 4610N, 530, 531, 600, 601, 700, 701, 800, 801, 900, 901. Replaces 81815827 and E5NN555AA11Z. (Item #: 191080, Ref. C5NN555AN) $67.00

$photo of Ford Lower Lift Arm R\H (CAT 1\2) measures 35 5\8 inches of length, 3 1\2 inches wide, and 11\16 in thickness. Applicable for 2000, 2000 US Built, 2100, 2110, 2110LCG, 2120, 2150, 2300, 230A, 230A US Built, 230AInd., 231, 231 US Built, 2310, 233, 250C, 2600, 2600 US Built, 2600N, 2600V, 2610, 2610 US Built, 2610V, 2810, 2910, 3000, 3000 US Built, 3055, 3100, 3120, 3300, 3310, 333, 3330, 334, 335, 335 US Built, 340, 3400, 340A, 340B, 345C, 345D, 3500, 3550, 3600, 3600 US Built, 3600N, 3600V, 3610, 3610 US Built, 3610N, 3610V, 3900, 4000, 4100, 4110, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445 US Built, 445A, 4500, 4600, 4600SU, 4610SU, 515, 530A, 531, 531 US Built, 532, 535, 540, 540A, 540B, 545, 545 US Built, 545A, 545C, 545D. Replaces 83954401.$
Ford Lower Link Lift Arm (CAT 1\2) - Ford Lower Lift Arm R\H (CAT 1\2) measures 35 5\8 inches of length, 3 1\2 inches wide, and 11\16 in thickness. Applicable for 2000, 2000 US Built, 2100, 2110, 2110LCG, 2120, 2150, 2300, 230A, 230A US Built, 230AInd., 231, 231 US Built, 2310, 233, 250C, 2600, 2600 US Built, 2600N, 2600V, 2610, 2610 US Built, 2610V, 2810, 2910, 3000, 3000 US Built, 3055, 3100, 3120, 3300, 3310, 333, 3330, 334, 335, 335 US Built, 340, 3400, 340A, 340B, 345C, 345D, 3500, 3550, 3600, 3600 US Built, 3600N, 3600V, 3610, 3610 US Built, 3610N, 3610V, 3900, 4000, 4100, 4110, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445 US Built, 445A, 4500, 4600, 4600SU, 4610SU, 515, 530A, 531, 531 US Built, 532, 535, 540, 540A, 540B, 545, 545 US Built, 545A, 545C, 545D. Replaces 83954401. (Item #: 122628, Ref. E5NN555AA) $99.00

$photo of Ford Lower Lift Arm L\H (CAT 1\2) measures 35 5\8 inches of length, 3 1\2 inches wide, and 11\16 in thickness. Applicable for 2000, 2000 US Built, 2100, 2110, 2110LCG, 2120, 2150, 2300, 230A, 230A US Built, 230AInd., 231, 231 US Built, 2310, 233, 250C, 2600, 2600 US Built, 2600N, 2600V, 2610, 2610 US Built, 2610V, 2810, 2910, 3000, 3000 US Built, 3055, 3100, 3120, 3300, 3310, 333, 3330, 334, 335, 335 US Built, 340, 3400, 340A, 340B, 345C, 345D, 3500, 3550, 3600, 3600 US Built, 3600N, 3600V, 3610, 3610 US Built, 3610N, 3610V, 3900, 4000, 4100, 4110, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445 US Built, 445A, 4500, 4600, 4600SU, 4610SU, 515, 530A, 531, 531 US Built, 532, 535, 540, 540A, 540B, 545, 545 US Built, 545A, 545C, 545D. Replaces 83954402.$
Ford Lower Link Lift Arm L\H (CAT 1\2) - Ford Lower Lift Arm L\H (CAT 1\2) measures 35 5\8 inches of length, 3 1\2 inches wide, and 11\16 in thickness. Applicable for 2000, 2000 US Built, 2100, 2110, 2110LCG, 2120, 2150, 2300, 230A, 230A US Built, 230AInd., 231, 231 US Built, 2310, 233, 250C, 2600, 2600 US Built, 2600N, 2600V, 2610, 2610 US Built, 2610V, 2810, 2910, 3000, 3000 US Built, 3055, 3100, 3120, 3300, 3310, 333, 3330, 334, 335, 335 US Built, 340, 3400, 340A, 340B, 345C, 345D, 3500, 3550, 3600, 3600 US Built, 3600N, 3600V, 3610, 3610 US Built, 3610N, 3610V, 3900, 4000, 4100, 4110, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445 US Built, 445A, 4500, 4600, 4600SU, 4610SU, 515, 530A, 531, 531 US Built, 532, 535, 540, 540A, 540B, 545, 545 US Built, 545A, 545C, 545D. Replaces 83954402. (Item #: 122627, Ref. E5NN556AA) $107.00

$photo of Used internally on Category I lower lift arms, where the arm attaches to the axle housing, this nut is 5\8 UNF thread. Nylon Lock Nut. Verify size before ordering. Many models have different size nuts. Replaces OEM numbers 376450X1, 376267X1, 360262X1, 1679532M1$
Ford Lower Lift Arm Pin Nut - Used internally on Category I lower lift arms, where the arm attaches to the axle housing, this nut is 5\8 UNF thread. Nylon Lock Nut. Verify size before ordering. Many models have different size nuts. Replaces OEM numbers 376450X1, 376267X1, 360262X1, 1679532M1 (Item #: 190743) $0.60

$photo of <UL> <li>For Ford tractor models Dexta, Major, 3000, 4000, 5000<\li> <li>Replaces Ford OEM number C5NNN557B, 81814226<\li> <li>Spring type clip for dual category lift arm balls<\li> <li>Sold Individually<\li> <\UL>$
Ford Lift Arm Ball Retainer Clip - For Ford tractor models Dexta, Major, 3000, 4000, 5000 Replaces Ford OEM number C5NNN557B, 81814226 Spring type clip for dual category lift arm balls Sold Individually (Item #: 107805) $3.40

No
Picture
Ford Lift Arm - For Ford tractor models 5000, 5100, 5200, 5340, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700 Replaces Ford OEM number D2NN555E, C7NN555C, C7NN555K, D1NN555B, D1NN555E Left hand \ Right Hand Category 2 Length: 35 Center to center Additional Handling and Oversize Fees Apply To This Item (Item #: 122630) $78.00

$photo of <UL> <li>For Ford tractor models 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710<\li> <li>Replaces Ford OEM number F0NN555AA11B, 82002013, F0NN555AA<\li> <li>Left hand \ Right Hand<\li> <li>Category 2<\li> <li>Length: 37 Center to center<\li> <li>Additional Handling and Oversize Fees Apply To This Item<\li> <\UL>$
Ford Lift Arm - For Ford tractor models 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710 Replaces Ford OEM number F0NN555AA11B, 82002013, F0NN555AA Left hand \ Right Hand Category 2 Length: 37 Center to center Additional Handling and Oversize Fees Apply To This Item (Item #: 122631) $188.58

$photo of <UL> <li>For Ford tractor models 2310, 2600, 2610, 2910, 3600, 3610, 3900, 3910, 4600<\li> <li>Replaces Ford OEM number D5NN545B, D8NN545AA<\li> <\UL>$
Ford Lift Arm - Center - For Ford tractor models 2310, 2600, 2610, 2910, 3600, 3610, 3900, 3910, 4600 Replaces Ford OEM number D5NN545B, D8NN545AA (Item #: 154991) $91.00

$photo of <UL> <li>For Ford tractor models 5000, 5100, 5200, 5340, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700<\li> <li>Replaces Ford OEM number C5NN838F, E3NN838AA<\li> <\UL>$
Ford Lift Arm - Right - For Ford tractor models 5000, 5100, 5200, 5340, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700 Replaces Ford OEM number C5NN838F, E3NN838AA (Item #: 154995) $91.00

$photo of <UL> <li>For Ford tractor models 5000, 5100, 5200, 5340, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700<\li> <li>Replaces Ford OEM number C5NN839F, E3NN839AA<\li> <\UL>$
Ford Lift Arm - Left - For Ford tractor models 5000, 5100, 5200, 5340, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700 Replaces Ford OEM number C5NN839F, E3NN839AA (Item #: 154997) $91.00

Click here to see parts by model

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy