(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford Tractor Hub


Click here to see parts by model


Ford Hub
- Rear Axle Hub 8N, NAA, Jubilee. With Studs. (Part No: 8N1171)
$62.03

Ford Release Bearing Hub
- Dimension A = 2.10 inches, B = 2.48 inches, C = 1.91 inches. For tractor models: 601, 701, 801, 901, 2000, 4000 (DOUBLE CLUTCH, serial number 14256 and up, 1965 and newer). For tractors with 5-speed transmission and double clutch. Replaces OEM number 311260, 86539876. (Part No: S.60599)
$36.92

Ford Front Wheel Hub
- Front Wheel Hub comes with Studs. For 8N, NAA. Uses CBPN1200A wheel bearing kit and stud bolt C5NN1107F. (Part No: 86511582)
$43.79

Ford PTO Drive Clutch Hub
- For 5700, 5900, 6410, 6810, 7410, 7810, 7910, 8210, (5000, 7000, both 1965 and up with Single\Two Speed), (5600, 5610, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710, all with Single\Two Speed). PTO Drive Clutch Hub replaces D2NNN750A. For tractor models with 8 or 10 Plate Independent PTO Clutch. 25 teeth and 52 teeth. (Part No: E0NNN750AA)
$124.86

Ford Hydraulic Pump Hub
- For tractor models 8N, 9N, 2N. Hydraulic Pump Hub is 3 inches outside diameter, 2 13\32 inches center to center on pins (no holes). Includes pins. (Part No: 191196)
$45.89

Ford Hydraulic Pump Hub
- This Hydraulic Pump Hub is used on tractor models 8N, 9N, 2N. Verify measurements. Hydraulic Pump Hub is 3 3\8 inches outside diameter, 2 3\8 inches center to center on holes. 6 spline - center bore = 5\8 inch on the lands and 3\4 inch on the grooves. Used with part numbers 192160 and 194354. (Part No: 192161)
$46.98

Ford Hydraulic Pump Hub
- For tractor models: 335, 340, 3400, 340A, 340B, 4400, 515, 532, 535, 540, 730. Hub. 5-1\4 inch overall diameter, 4 mounting holes 7\16 inch diameter, smooth type, 3-7\8 inch spacing. 1-9\16 inch relief diameter, 3\4 inch depth. 13 spline center bore, 7\8 inch diameter. This pump has 13 splines and is NOT threaded. Used with 291951, 292222, 7701044 pump shaft. (Part No: C5NNN879A)
$56.95

Ford Coupler Hub, Hydraulic Pump
- For use with Loader-Backhoe Hydraulic Pumps. Hub is 4 inches overall diameter, 4 mounting holes at 7\16 inches in diameter, smooth type, 2-3\4 inch spacing. 1-3\8 inch relief diameter, 9\16 inch depth, 10 spline, 1 inch center bore. (Note: Non-spline coupler hubs (splined) are available in 5\8, 3\4, and 7\8 inches -CALL). For tractor models 2000, 4000, 501, 600, 620, 630, 640, 650, 660, 700, 740, 741, 750, 701, 800, 820, 840, 850, 900, 950, 960, Jubilee, NAA. (Part No: 290421)
$40.00

No
Picture
Ford Hub
- 7\8 inch, 13 spline threaded, 3-7\8 inch hole spacing. For 730 LOADER. (Part No: 291315)
$61.99

Ford Hub
- Front Wheel Hub with Studs. For 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: C9NN1104D)
$57.89

Ford Hub Front
- This Front Hub comes with 6 studs, 6 nuts and Hub Cap (not shown). For tractor models 4000, 4100, 4600, 4610. Replaces C9NN1104D, C9NN1104E, 81823161. (Part No: C9NN1104E)
$60.72

Ford Hub
- Hub, PTO Drive Clutch, 25 teeth and 52 teeth. For 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710. (Part No: F1NNN750AA)
$124.86

Ford Coupler Hub Drive Kit
- Coupler Complete, Morflex Series 302. Contains center member, 2 drive flanges with set screws, and 4 bolts with lock nuts. The center member is 3-1\8 inch diameter, with four 1\4 inch holes and 1-15\16 inch spacing.The drive flange is 3\4 inch round bore with set screw 1\4 inch by 3\8 inch. (Part No: L601-14)
$69.04

Ford Hydraulic Pump Hub
- Hydraulic pump hub for Sherman 54 series loader. Hydraulic pump hub 3 7\8 inch outside diameter, 2 3\4 inches center to center on holes. 6 spline center bore, 3\4 inch inside diameter. (Part No: 54C2055)
$40.11

Ford Release Bearing Hub
- Dimension A = 1.75 inches, B = 2.05 inches, C = 2.80 inches. Fits 601, 701, 801, 901, 2000, 4000. All up to 1965. 5 speed transmission with SINGLE clutch (serial number 14256 and greater). (Part No: 311259)
$31.92

Ford Release Bearing Hub
- For tractor models: 1801, 1821, 1841, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 600, 601, 700, 701, 800, 801, 900, 901, 2N, 8N, 9N, NAA, Jubilee, NAB. (Part No: 9N7561)
$38.43

Ford Front Wheel Hub Assembly
- Fits Dexta, Super Dexta, (4600SU with P.S.). (Part No: C9NN1104F)
$56.44

Ford Hub Carrier, Shaft
- Used with the following tractors that use APL135 FWD Axle: 585, 644, 685, 743, 744, 745, 745S, 785, 844, 844S, 856, 885. Replaces 1502272C1. (Part No: 3232082R91)
$207.61

Ford Seal, Front Wheel Hub
- Front Wheel Hub Dust Seal. 2 11\16 inch outside diameter, 2 inches inside diameter. Fits: 2000 1955-1964 USA BUILT, 2N 1939-1947, 4000 1955-1964 USA BUILT, 600 1955-1964 USA BUILT, 700 1955-1964 USA BUILT, 800 1955-1964 USA BUILT, 8N 1948-1952, 900 1955-1964 USA BUILT, 9N, NAA 1953-1954. Sold in quantities of 2, PRICE IS FOR EACH. Must be ordered in quantities of 2. Can replace 9N1190B. (Part No: NCA1190A)
$2.23

Ford Clutch Release Bearing Hub
- For tractor models 5000, 5600, 5700, 6600, 6700 all with Single Clutch. (Part No: C5NN7571H)
$27.15

Ford Water Pump with Hub
- New, with Gasket. For tractor models (1720, 1920 and 3415 all 1987 and up), 2120 (1999 and up). (Part No: SBA145017780)
$62.65

Ford Wheel Hub
- For tractor models 1720, 1910, 2110. (Part No: SBA330460121)
$45.73

Ford Lucas Hub Oil (quart)
- Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Part No: LU10088)
$10.13

Ford Hub, Front Wheel
- Tractors: 601, 701, 801, 901, for 6 hole 4.50 inch X 16 inch wheel (1957 to 1964); for 6 hole 4.00 inch X 16 inch wheel. Tractors: 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2810, 2910, 3000 (1965 to 1975), 2600, 3055, 3100, 3120, 3150, 3190, 3300, 3310, 3550, 3600, 3900, 3910, 4000, 4100, 4110, 4140, (1975 to 1981), 2610, 3610 (1981 and up). Uses bearing and seal kit FW93-WS; wheel bolt C5NN1107F and nut C5NN1012B. Replaces 95731110, C5NN1104B. (Part No: C9NN1104F)
$56.44

Ford PTO Hub
- PTO Hub Drive for tractor models 5640, 6640, 7740, 7840, 8240, 8340, TS90, TS100, TS110 12x12 Less Dual Power. (Part No: F1NNN777AA)
$94.81

Ford Hub Assembly
- Hub with bushings (3\4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1\4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH)
$28.38

Ford Hub Assembly
- Hub with bushings (3\4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1\4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH)
$28.38

Ford HUB with BRG CUPS
- 4-bolt, 5 inch bolt circle and 3-5\8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Part No: BH1311)
$44.80

No
Picture
Ford Hub Cap -with hole for grease fitting
- For tractor models 2000, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5030. (Part No: 957E1139)
$8.69

No
Picture
Ford Wheel Hub Cap
- With Gasket for Dexta and Super Dexta. Square head with grease fitting. Also replaces 81816580 and C5NN1107F. (Part No: 81811271)
$8.69

Ford Water Pump with Hub
- Water pump with Hub. Fits 1100, 1200, 1300 with 4 Blade Fan. Replaces SBA145016201. Uses SBA052300450 O-ring, sold separately. (Part No: SBA145016201)
$80.37

Ford Release Bearing and Hub
- This is a Hydraulic Release Bearing and Carrier. It is used on 12 x 12 transmissions. Ford \ New Holland 5640, 6640, 7740, 7840, 7840O, 8240, 8340, T6010, T6020, T6030, T6050, TS100, TS100A, TS110, TS110A, TS115, TS115A, TS90. Replaces 47134440, 81864436, 82005471, F0NN7580AA, 510001920, ``AZ36461. (Part No: F0NN7580AA)
$207.00


Click here to see parts by model







PayPal


Customer Service
Monday - Friday
9:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure


  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2015 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.