(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford Tractor Drag Link


Click here to see parts by model


Ford Drag Link Tube
- 32-3\4 inches long. Outside diameter 0.875 inch. Includes clamps (on each end), For 8N, 9N, 2N (For complete tie rod assembly add front drag link ends 8N3270 AND rear drag link ends NAA33271A. (**BEFORE ORDERING: Measure your drag link tube length. Part number 8N33315 drag link tube was also used on these tractors. It is 34-1\2 inches long). (Part No: 8N3314D)
$35.98

Ford Drag Link End, Greasable
- Fits 8N 1948-1952. Used on front of drag link. Left hand threads. 3.375 inches long from center of post to end of large thread. Large thread diameter is .687 inches (11\16 inch). (Part No: 8N3270)
$17.48

Ford Drag Link End, Rear
- Length 4.250 inches, .687 inch diameter, 18 right hand thread. For tractor models: 8N, 9N, 2N, 2000 4 cylinder 1962-1964, 2031, 2120 1963-1964, 2131, 4000 1962-1963, 4031, 4120, 4131, 600, 601, 800, 801, NAA, NAB. (Part No: NAA33271A)
$14.19

Ford Drag Link End, Front, Greasable
- A= 3.875 inches, B= .687 inches, 18 left hand thread. Manual steering. For tractor models 8N, 9N, 2N, NAA, NAB, 600, 601, 800, 801, 2000 (4 cylinder 1\1962 to 12\1964), 4000 (1\1962 to 12\1964). Almost exactly the same as 8N3270 except the castle nut end threaded section is 1\16 of an inch longer. (Part No: NAA3270A)
$14.79

Ford Drag Link End
- End, Rear, Right Hand, 29.625 inches to center of post, for Drag Link with Power Steering. For 2000, 2600, 2610, 3000, 3600, 3610, 4100, 4110. (Part No: C5NN3307G)
$85.49

Ford Drag Link End
- End, Rear, Left Hand, 28.125 inch tube length, for Drag Link with Power Steering. (2000, 3000 1965 to 1975), 2600, 3600, 4100 (1975 to 1981, less cab), 2610, 3610, 4110 (1981 to 9\1984). Replaces C3NN3308E, C5NN3306E, C5NN3308E, 81802895. (Part No: C5NN3308E)
$89.70

Ford Drag Link End
- Drag link end, Front, for Drag Link with Power Steering. Left hand thread. YOU MAY RECEIVE WITH OR WITHOUT GREASE FITTING. The without, is a sealed unit which never needs greasing. For 2000, 2600, 2610, 3000, 3600, 3610, 4100. 3\4 inch thread diameter and length from center of knuckle to end of threads is 3.31 inches. (Part No: C5NN3A300B)
$15.59

Ford Drag Link End
- End, rear, 41.25 inches to center of post, for Drag Link with Power steering. For 4000, 1972-1975 and 4600. Replaces D0NN3307A, 81825596. (Part No: D0NN3307A)
$65.68

Ford Drag Link
- Drag Link for power steering, 50.50 inch center post to center post. For 5000, 5600, 6600, 7000, 7600. Replaces C7NN3304B, E0NN3308CA, 81822052, 83925158. (Part No: E0NN3304CA)
$64.45

Ford Drag Link End
- End, rear, 1.00 inch-16, for drag link with power steering 3.75 inch to center of post. For 5000, 7000, 8000, 8200, 8600, 9000, 9200, 9600. Replaces C5NN3307E, C5NN3307F, C7NN3289D, E3NN3307AA, 81817836, 81822051. (Part No: E3NN3307AA)
$18.38

Ford Drag Link End
- End Front, for Drag Link with Manual Steering. For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4100, Dexta, Super Dexta. Replaces 81802867, 957E3290B, NAA3270A (Part No: 957E3290B)
$10.28

Ford Drag Link End
- End, Rear, for Drag Link with Manual Steering. For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4100, Dexta, Super Dexta. (Part No: 957E3307B)
$11.63

Ford Drag Link End, Front, RH Thread, Greasable
- End Assembly, Front, .687-18 right hand thread, 3.187 inch from center of post to end of large thread. For 9N, 2N. (Part No: 9N3270)
$12.98

Ford Drag Link Dust Cover
- Steering Drag Link Rear Ball Joint Cover. For tractors: 8N, 9N, 2N, NAA, 600, 800 (1939-1957). Center is black rubber. Small hole end is 5\8 inch hole, Large end is 1 7\16 inch inside diameter. (Part No: 9N3324)
$8.63

Ford Drag Link Tube
- 6.120 inches long. For tractor models 600 serial number 78836>, 800 serial number 78836>. (Part No: 312874)
$38.80

Ford Drag Link Tube
- 5.00 inches long. For tractor models 2000, 2031, 2100, 2110, 2120, 2131, 2150, 230A, 231, 234, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3150, 334, 3600, 3611, 3900, 3910, 4000, 4031, 4100, 4110, 4120, 4131, 4600, 4610, 530A, 531, 600, 601, 800, 801, NAA. All with serial number less than 78836. (Part No: C5NN3349A)
$33.83

Ford Drag Link Tube, LH
- 33.15 inches long. For tractor models 2000, 3000. (Part No: C5NN3A319A)
$76.12

Ford Drag Link Tube
- 34.5 inches long. Uses one right hand (NAA33271A) and one left hand (NAA3270A) Tie Rod End. For tractor models 9N, 2N, (used on right hand side on early 8N and left hand side on late 8N), Dexta, Super Dexta.(**BEFORE ORDERING: Measure your drag link tube length, part number 8N33314D drag link tube was also used on 9N, 2N and 8N tractors. It is 32-3\4 inches long). (Part No: 8N33315)
$35.70

Ford Drag Link End, Front
- 3.250 inches long, .750 inch diameter, 16 left hand thread. For tractor models (600, 800 up to serial number 78836 with power steering). (Part No: 309523)
$25.35

Ford Drag Link Assembly
- A= 45.25 inch, B= 1.187 inch. For tractor models: Major, Super Major. Replaces 81717426, E1ADDN3304B, E1ADDN3304C. (Part No: E1ADDN3304B)
$96.53

Ford Drag Link End, Front
- A= 4.00 inches, B= .813 inches, 16 left hand thread. For tractor models 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 2000, 4000. (Part No: 309591)
$43.51

Ford Drag Link End, RH
- A= 34.25 inches, B= 1.00 inch, .813 inch diameter, 16 UN right hand thread. For tractor models (2000, 4000 all 4 cylinders serial number 78836 and up), (600, 800 serial number 78836 and up). Replaces 310082. (Part No: 312870)
$167.93

Ford Drag Link End, LH
- A= 36.44 inches, B= 1.00 inch, .813 inch diameter, 16 UN RH thread. For tractor models (600, 800 serial number 78836 and up), (2000, 4000, all 4 cylinder serial number 78836 and up). Replaces 310083. (Part No: 312871)
$135.61

Ford Drag Link End, Rear, RH
- A= 32.00 inches, B= 1.0 inch with 1.0 inch threads. For tractor models: 3000, 335, 3400, (4000 1965 and up), 4410, 532. (Part No: C5NN3307H)
$234.21

Ford Drag Link End, Front
- A= 4.00 inch, B= 13\16 inch, 16 left hand thread. For tractor models: 3000, 335, 3400, 4000, 4410, 532. (Part No: C5NN3A300C)
$30.25

Ford Drag Link End, Rear
- A= 40.00 inches long. For tractor models (4000 from 4\1970 to 1975 with manual steering), 4100, (4600 from 8\1970 to 12\1971 with power steering and from 1975 to 1981 with manual steering), (4610 1981 with manual steering). Replaces 81821968. (Part No: C7NN3307A)
$46.85

Ford Drag Link End LH
- For tractor models 335, 3000, 3400. ALL with Manual and Power Steering with Non Adjustable Front Axle. Tractor 532, 4410 with Power Steering and Non Adjustable Front Axle. 1 X 16 RH Thread, Length 34.125 Center to End. TRACTOR 4000 1965> with Power Steering and Non Adjustable Front Axle. Replaces OEM part number 81812358. (Part No: C5NN3308F)
$164.68

Ford Drag Link Tube - RH
- Drag Link Tube is right hand. Tube measures 36.125 inches long, has 1 right hand thread and 1 left hand thread with inside diameter of 11\16 inch 18 thread. For NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Part No: NAA3314B)
$32.89

Ford Drag Link Tube - LH
- Drag Link Tube is right hand. Tube measures 38.5 inches long, has 1 right hand thread and 1 left hand thread with inside diameter of 11\16 inch-18 thread. For NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Part No: NAA33315A)
$31.52

Ford Drag Link Assembly
- This Tie Rod Assembly includes 8N3314D tube with both ends with clamps. Tube measures 32.75 inches. Overall measures 35 inches center to center when both ends adjusted in to stop, 9\16 inch by 18 pitch stud, includes Zerk fittings. For tractor models 8N, 9N, 2N. (Part No: 8N3314COMPLT)
$55.19

No
Picture
Ford Drag Link End, Front, RH Thread, Non-Greasable
- Sealed, End Assembly, Front, .687-18 right hand thread, 3.187 inch from center of post to end of large thread. For 9N, 2N. (Part No: 9N3270-N)
$8.82

No
Picture
Ford Drag Link End, Non-Greasable
- Sealed, fits 8N 1948-1952. Used on front of drag link. Left hand threads. 3.375 inches long from center of post to end of large thread. Large thread diameter is .687 inch (11\16 inch). (Part No: 8N3270-N)
$11.18

Ford Drag Link End, Front, Non-Greasable
- This Drag Link End is exactly like the NAA3270A except it is sealed, meaning you never have to grease them! Sealed, A= 3.875 inches, B= .687 inches, 18 left hand thread. Manual steering. For tractor models 8N, 9N, 2N, NAA, NAB, 600, 601, 800, 801, 2000 (4 cylinder 1\1962 to 12\1964), 4000 (1\1962 to 12\1964) . Sold in quantities of 2, PRICE IS FOR EACH. Almost exactly the same as 8N3270 except the castle nut end threaded section is 1\16 of an inch longer. (Part No: NAA3270A-N)
$11.30

Ford Drag Link Dust Cover
- Rear Tie Rod Boot with leather insert. Fits tractor models: Jubilee, NAA, NAB, 2000 4 cylinder, 2030, 2031, 2120, 2130, 2131, 2N, 4000 4 cylinder, 4030, 4031, 4120, 4121, 4130, 4131, 600, 601, 800, 801, 8N, 9N. All 4 cylinder 1939 to 1964. 1.425 inch base, .850 inches tall, .700 inch hole. Replaces: 9N3324, A0NN3324. (Part No: 9N3324OE)
$10.43

No
Picture
Ford Drag Link Tube
- This drag link tube is 28.250 inches long. One side is 11\16 inch x 18 right hand UNF thread. The other side is 11\16 inch x 18 left hand UNF thread. Replaces C5NN3314F. (Part No: C5NN3314F)
$35.77

No
Picture
Ford Drag Link Tube
- This Drag link tube is 30.900 inches long. It has 11\16 inch X 18 right hand UNF thread on one side, and 11\16 inch X 18 left hand UNF thread on the other side. It is used as a right hand side on 2000 and 3000 and left hand on 2300 and 3300. Replaces original part number C5NN3314C. (Part No: C5NN3314C)
$58.64


Click here to see parts by model







PayPal


Customer Service
Monday - Friday
9:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure


  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2015 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.